16The Nike+ SportWatch GPS User’s Guide
ABOUT THE SHOE SENSOR’S BATTERY LIFE
The sensor contains a non-replaceable battery with a life of more than 1000
active hours. The sensor has a built-in power management system, which only
consumes power when active (that is, when it senses motion).
You can leave the sensor in your shoe when you aren’t working out, but be aware
that the sensor will be active anytime you’re walking or running. If you plan to
wear your shoes for a long time without working out, we recommend replacing
the sensor with the foam insert to save battery life.
Note: You can buy a replacement sensor through nikestore.com or apple.com.
PUTTING THE SENSOR TO SLEEP
fig. 13
The sensor is awake and on by default. If you want to store the sensor
for a long period of time or make it stop transmitting, you can put it to
sleep or take it out of your shoe.
To put the sensor to sleep: Use a pen or a paper clip to press and hold the
Sleep/Wake button for three seconds. (fig. 12)
Important: Put the sensor to sleep before taking it
on an aircraft, to comply with applicable government
regulations.
To wake the sensor: Use a pen or a paper clip to press the Sleep/Wake button.
The Nike+ Sensor also works with the Nike+ SportBand, iPod nano, iPod Touch,
and iPhone.
Sleep / Wake Button