Ubiquiti Uni-fi AP Guida Rapida

Marca: Ubiquiti

Modello: Uni-fi AP

Tipo: Guida Rapida

Questo manuale è adatto anche per

Enterprise WiFi System

Models:

UAP/UAP-LR (Long Range)

Introduction

Thank you for purchasing the Ubiquiti Networks

™

UniFi

™

Enterprise

WiFi System. The UniFi Enterprise WiFi System includes the UniFi

Controller software that allows you to manage your wireless

network using your web browser.

This Quick Start Guide is for use with the following UniFi Enterprise

WiFi System Access Point models. Unless otherwise needed to

specify differences between the two models, this Quick Start

Guide will refer to both as UniFi AP.

Model

Maximum Power

Consumption

Maximum TX

Power

UniFi AP

(UAP)

4 W 20 dBm

UniFi AP Long Range

(UAP-LR)

6 W 27 dBm

The UniFi Enterprise WiFi System also includes the necessary

hardware for mounting the unit on a wall or a ceiling. The UniFi

Enterprise WiFi System supports Passive PoE, which works with the

included PoE adapter.

If you want to power the UniFi AP from an 802.3af compliant

switch, Ubiquiti Networks offers the optional Instant 802.3af

Adapter to instantly transform any PoE device into a fully 48V,

802.3af compliant product. Product details are available on our

website at http://ubnt.com/8023af

UniFi

™

AP/AP-LR Quick Start Guide

Package Contents

UniFi AP Wall-Mount Bracket Ceiling-Mount Plate

M3x50 Flat Head

Screws

(Qty. 3)

M3 Keps Nuts

with Tooth Washer

(Qty. 3)

M2.9x20 Self

Tapping Screws

(Qty. 3)

M3x20 Screw

Anchors

(Qty. 3)

Enterprise WiFi System

Models:

UAP/UAP-LR (Long Range)

PoE Adapter

(24V, 0.5A)

Power Cord UniFi Controller

CD with User Guide

Quick Start

Guide

System Requirements

• Microsoft Windows XP, Windows Vista, Windows 7, Windows 8,

or Mac OS X

• Java Runtime Environment 1.6 (or above)

• Web Browser: Mozilla Firefox, Google Chrome, or Microsoft

Internet Explorer 8 (or above)

Network Topology Requirements

• A DHCP-enabled network (for the AP to obtain an IP address as

well as for the wireless clients after deployment)

• A management station computer running the UniFi Controller

software, located either onsite and connected to the same

Layer-2 network, or off-site in a cloud or NOC

Router

O-Site

Cloud/NOC

On-Site

Management Station

Wired UAP/UAP-LR

Wireless

Uplinked

UAP/UAP-LR

Sample Network Diagram

1. Please refer to the UniFi Enterprise WiFi System User Guide | UAP/UAP-LR on the

CD for setting up wireless-linked APs.

2. All UniFi APs support off-site management controllers. See the User Guide for

setup details.

UniFi

™

AP/AP-LR Quick Start Guide

Hardware Installation

The UniFi AP is powered by the included PoE (Power over Ethernet)

adapter. To install the UniFi AP, perform the following steps:

1. Connect an Ethernet cable to the Ethernet port on the

UniFi AP.

2. Connect the other end of the Ethernet cable to the Ethernet

port labeled PoE on the PoE Adapter.

Note: If you plan to mount the UniFi AP on your ceiling,

perform the ceiling mount installation steps before

connecting the Ethernet cable to the PoE Adapter.

Hardware Installation

3. Connect an Ethernet cable from your LAN to the Ethernet port

labeled LAN on the PoE Adapter.

4. Connect the power cord to the power port on the PoE Adapter.

Connect the other end to of the power cord to a power outlet.

UniFi

™

AP/AP-LR Quick Start Guide

Mounting the Access Point

The UniFi AP can be wall-mounted or mounted on a ceiling.

Perform the following steps for the appropriate installation:

Wall-Mount

1. Align the Wall-Mount Bracket with the Wall Mount text facing

up. There are horizontal and vertical lines on the bracket to

help with orientation.

2. Use a pencil to mark the holes on the wall.

3. Use a 6 mm drill bit to drill the holes in the wall.

4. Insert the 3 M3x20 Screw Anchors into the wall.

5. Secure the Wall-Mount Bracket to the wall by inserting the

M2.9x20 Self Tapping Screws into the anchors.

Hardware Installation

6. Align the notches on the UniFi AP with the notches on the

Wall-Mount Bracket.

7. Turn the UniFi AP clockwise until it locks into place.

UniFi

™

AP/AP-LR Quick Start Guide

Ceiling-Mount

1. Remove the ceiling tile.

2. Align the Ceiling-Mount Plate to the center of the top side of

the ceiling tile.

3. Use a 3.5 mm drill bit to drill holes for the three flat head

screws.

4. Cut or drill a circle approximately 25 mm in size that lines up

with the larger circle on the Ceiling-Mount Plate. This will be

used for the Ethernet cabling.

5. Secure the Wall-Mount Bracket and Ceiling-Mount Plate to the

ceiling tile using the 3 M3x50 Flat Head Screws and 3 M3 Keps

Nuts with Tooth Washers.

Hardware Installation

6. Feed the Ethernet cable through the hole and then align the

UniFi AP with the notches on the Wall-Mount Bracket.

7. Turn the UniFi AP clockwise until it locks into place.

UniFi

™

AP/AP-LR Quick Start Guide

Software Installation

Insert the UniFi Controller software CD into your CD-ROM drive

and follow the instructions for your specific computer type.

Mac Users

1. Click the Install icon.

2. Click Continue and follow the on-screen instructions to install

the software.

Software Installation

3. Go to Go > Applications and double-click the UniFi icon.

Proceed to Configuring the UniFi Controller Software on page 13.

PC Users

1. Launch UniFi-installer.exe.

2. Click Install.

3. If your computer doesn't have Java 1.6 or above installed, you

will be prompted to install it. Click Install to continue.

UniFi

™

AP/AP-LR Quick Start Guide

4. Click Next.

5. Ensure that the Start UniFi Controller after installation option is

checked and click Finish.

Note: The UniFi Controller software can also be launched

from Start > All Programs.

Software Installation

Configuring the UniFi Controller Software

1. The UniFi Controller software startup will begin. When the

option becomes available, click Launch a Browser to Manage

Wireless Network.

2. Select your language and country. Click Next.

3. Select the devices that you want to configure and click Next.

UniFi

™

AP/AP-LR Quick Start Guide

4. The UniFi Installation Wizard will create a secure primary

wireless network for your devices. Perform the following steps:

a. Enter the wireless network name (SSID) in the Secure SSID

field.

b. Enter a passphrase to be used for your primary network.

c. If you want to enable guest access, select Enable Guest

Access and enter a guest network name in the Guest SSID

field.

d. Click Next.

5. Enter an admin name and password to use when accessing the

management interface. Confirm your password in the Confirm

field. Click Next.

Software Installation

6. Review your settings. Click Finish to save your settings, or click

Back to make changes. Once finished you will be redirected to

the management interface via your web browser.

Congratulations, your wireless network is now configured.

A login screen will appear for the UniFi Controller management

interface. Enter the Admin Name and Password that you created

and click Login.

You can manage your wireless network and view network statistics

using the UniFi Controller management interface. For information

on configuring and using the UniFi Controller software, refer to the

User Guide located on the CD.

UniFi

™

AP/AP-LR Quick Start Guide

Installer Compliance Responsibility

Devices must be professionally installed and it is the professional

installer's responsibility to make sure the device is operated within

local country regulatory requirements.

Safety Notices

1. Read, follow, and keep these instructions.

2. Heed all warnings.

3. Only use attachments/accessories specified by the manufacturer.

WARNING: Do not use this product in location that can be

submerged by water.

WARNING: Avoid using this product during an electrical storm.

There may be a remote risk of electric shock from lightning.

Electrical Safety Information

1. Compliance is required with respect to voltage, frequency, and current

requirements indicated on the manufacturer’s label. Connection to a

different power source than those specified may result in improper

operation, damage to the equipment or pose a fire hazard if the

limitations are not followed.

2. There are no operator serviceable parts inside this equipment. Service

should be provided only by a qualified service technician.

3. This equipment is provided with a detachable power cord which has

an integral safety ground wire intended for connection to a grounded

safety outlet.

a. Do not substitute the power cord with one that is not the provided

approved type. Never use an adapter plug to connect to a 2-wire

outlet as this will defeat the continuity of the grounding wire.

b. The equipment requires the use of the ground wire as a part of the

safety certification, modification or misuse can provide a shock

hazard that can result in serious injury or death.

c. Contact a qualified electrician or the manufacturer if there are

questions about the installation prior to connecting the equipment.

d. Protective earthing is provided by Listed AC adapter. Building

installation shall provide appropriate short-circuit backup

protection.

e. Protective bonding must be installed in accordance with local

national wiring rules and regulations.

Compliance

FCC

Changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including

interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio

communications. Operations of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to

correct the interference at his own expense.

For MPE and antenna usage details, please visit our website at

www.ubnt.com/products

Industry Canada

This Class A digital apparatus complies with Canadian ICES-003.

To reduce potential radio interference to other users, the antenna

type and its gain should be so chosen that the equivalent isotropically

radiated power (e.i.r.p.) is not more than that permitted for successful

communication.

This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions:

1. This device may not cause interference, and

2. This device must accept any interference, including interference that

may cause undesired operation of the device.

UniFi

™

AP/AP-LR Quick Start Guide

Cet appareil numérique de la classe A est confrome à la norme NMB-003

Canada.

Pour réduire le risque d’interférence aux autres utilisateurs, le type

d’antenne et son gain doivent être choisies de façon que la puissance

isotrope rayonnée équivalente (PIRE) ne dépasse pas ce qui est nécessaire

pour une communication réussie.

Cet appareil est conforme à la norme RSS Industrie Canada exempts de

licence norme(s). Son fonctionnement est soumis aux deux conditions

suivantes:

1. Cet appareil ne peut pas provoquer d’interférences et

2. Cet appareil doit accepter toute interférence, y compris les

interférences qui peuvent causer un mauvais fonctionnement du

dispositif.

RF Exposure Warning

The antennas used for this transmitter must be installed to provide a

separation distance of at least 20 cm from all persons and must not be

located or operating in conjunction with any other antenna or transmitter.

Les antennes utilisées pour ce transmetteur doivent être installé en

considérant une distance de séparation de toute personnes d'au moins

20 cm et ne doivent pas être localisé ou utilisé en conflit avec tout autre

antenne ou transmetteur.

CE Marking

CE marking on this product represents the product is in compliance with

all directives that are applicable to it.

Alert Sign (!) Follows CE Marking

Alert sign must be indicated if a restriction on use applied to the product

and it must follow the CE marking.

La pagina sta caricando ...

Ubiquiti Uni-fi AP Guida Rapida

Marca: Ubiquiti

Modello: Uni-fi AP

Tipo: Guida Rapida

Questo manuale è adatto anche per

Scarica il pdf

rapporto

in altre lingue

English: Ubiquiti Uni-fi AP Quick start guide
română: Ubiquiti Uni-fi AP Ghid de inițiere rapidă

Ubiquiti Uni-fi AP Guida Rapida

Questo manuale è adatto anche per

Ubiquiti Uni-fi AP Guida Rapida

in altre lingue

Documenti correlati