Cartoni Sport 200 Manuale utente

Tipo
Manuale utente
PROFESSIONAL CAMERA SUPPORT
USER’S MANUAL
& Maintenance
2
Thank you for choosing the Sport 200 tripod manufactured by CARTONI.
The Sport 200 is designed and built using state-of-art technologies and
procedures in order to guarantee maximum reliability over me, as well as
total safety for its users.
! In order to properly and safely use the Sport 200 tripod
read this manual and follow the instrucons.
! All back-up material, and this manual in parcular,
should be stored in a safe place for future reference.
! This publicaon may not be reproduced in full or in part,
or memorized, transmied or translated into any com-
mon or computer language, in any form or by any elec-
tronic, mechanical, magnec, opcal, chemical, manual or
other means without the express authorizaon in wring
of CARTONI
! CARTONI holds the right to revise or change this pub-
licaon without any prior advice to any person or orga-
nizaon.
DISCLAIMER
CARTONI ceres that the informaon contained in this manual is correct at the
me of prinng. CARTONI reserves the right to update or change any specica-
on, design and/ or funconality of the product and the relevant informaon at
any me and without no- caon. Updates in the documentaon will be incorpo-
rated in the new release of the same. For the updated version please consult the
latest release on our website www.cartoni.com.
DECLARATION OF CONFORMITY
CARTONI declares that this product has been manufactured in accordance with
standards ISO 9001:2015 and complies with the EC Direcve 2001/95/CE.
3
Index
1. INTRODUCTION 5
1.1 WARRANTY 5
1.2 AUTHORIZED PERSONNEL 6
2. TECHNICAL SPECIFICATIONS 7
2.1 COMPATIBLE EQUIPMENT 8
2.2 SPECIFICATIONS 8
2.3 OPTIONAL ACCESSORIES 9
3. INSTALLATION AND SETTINGS 9
3.1 SETTING THE SPORT 200 9
3.2 MOUNTING A CAMERA SUPPORT HEAD 12
4. SAFETY PRECAUTIONS 12
5. DISASSEMBLING AND STORAGE 13
6. SERVICE 14
6.1 ROUTINE MAINTENANCE 14
6.2 EXTRA MAINTENANCE AND SPARE PARTS 14
6.5 DECOMMISIONING 15
CARTONI ®
All rights reserved ©
Manual Version: 1.0
4
IT IS HEREBY CERTIFIED THAT THE QUALITY MANAGEMENT SYSTEM OF
IAF:17
IAF:29
19714/09/S
CARTONI S.P.A.
VIA DI PORTONACCIO, 33/B 00159 ROMA (RM) ITALIA
VIA DI PORTONACCIO, 33/B 00159 ROMA (RM) ITALIA
DESIGN, MANUFACTURE AND POST-SALE ASSISTANCE OF PROFESSIONAL BROADCAST AND FILM EQUIPMENT.
MARKETING OF PROFESSIONAL BROADCAST AND FILM ACCESSORIES AND PRODUCTS AS LOCAL
AGENCY/REPRESENTATIVE
PROGETTAZIONE, FABBRICAZIONE ED ASSISTENZA POST-VENDITA DI PRODOTTI PER LA CINEMATOGRAFIA E LA
TELEVISIONE PROFESSIONALE. COMMERCIALIZZAZIONE DI PRODOTTI ED ACCESSORI IN CONCESSIONE PER LA
CINEMATOGRAFIA E LA TELEVISIONE PROFESSIONALE
Per informazioni sulla validità
del certificato, visitare il sito
www.rina.org
For information concerning
validity of the certificate, you
can visit the site
www.rina.org
CCEERRTTIIFFIICCAATTEE NNoo..
CERTIFICATO N.
SI CERTIFICA CHE IL SISTEMA DI GESTIONE PER LA QUALITÀ DI
PER I SEGUENTI CAMPI DI ATTIVITÀ / FOR THE FOLLOWING FIELD(S) OF ACTIVITIES
NELLE SEGUENTI UNITÀ OPERATIVE / IN THE FOLLOWING OPERATIONAL UNITS
L'uso e la validità del presente certificato sono soggetti al rispetto del documento RINA: Regolamento per la Certificazione di Sistemi di Gestione per la Qualità
La validità del presente certificato è subordinata a sorveglianza periodica annuale / semestrale ed al riesame completo del sistema di gestione con periodicità triennale
The validity of this certificate is dependent on an annual / six monthly audit and on a complete review, every three years, of the management system
È CONFORME ALLA NORMA / IS IN COMPLIANCE WITH THE STANDARD
Per i requisiti della norma non
applicabili al campo di applicazione
del sistema di gestione
dell'organizzazione, riferirsi alle
informazioni documentate relative.
Reference is to be made to the
relevant documented information
for the requirements of the
standard that cannot be applied to
the Organization's management
system scope
ISO 9001:2015
The use and validity of this certificate are subject to compliance with the RINA document : Rules for the certification of Quality Management Systems
12.06.2009
24.05.2021
CISQ è la Federazione Italiana di Organismi di
Certificazione dei sistemi di gestione aziendale
CISQ is the Italian Federation of
management system Certification Bodies
Prima emissione
First Issue
Data revisione
Revision date
RINA Services S.p.A.
Data scadenza
Expiry Date 02.06.2024
Via Corsica 12 - 16128 Genova Italy
Data decisione di rinnovo
Renewal decision date 24.05.2021
Amilcare Rini
Rome Management System
Certification, Head
Membro degli Accordi di Mutuo
Riconoscimento EA, IAF e ILAC
Signatory of EA, IAF and ILAC
Mutual Recognition Agreements
SGQ N° 002 A
5
1. IntroductIon
The correct and safe use of this tripod is only guaranteed if it is used in
accordance with the following manual and other documentaon that ac-
companies the Sport 200 tripod. It is therefore essenal to read all the
documentaon carefully and to keep it in a safe place.
It is necessary to always make sure that all the operators have completely
read and understood the instrucons. CARTONI accepts no responsibility
for damage to persons and/or property consequence to the improper use
of the tripod.
Do not remove or deface any label, indicaon and warning axed to the
tripod.
CARTONI declines al responsibility for the failure to observe the standards
of safety and prevenon detailed in the various secons of this manual and
for injuries caused due to improper use.
Any modicaon to the tripod must have prior authorizaon by CARTONI
and it is strictly forbidden to use the Sport 200 in any other way than indi-
cated.
All the standard maintenance operaons (maintenance, repairs, cleaning
and adjustments) should be carried out by competent personnel as pre-
scribed in the manual.
1.1 Warranty
The Sport 200 tripod is covered by a warranty against manufacturing de-
fects for 2 years from the date of shipment.
The warranty covers replacement of any defecve part and the labour re-
quired excluding transport/duty costs.
In the case of replacement of single parts, these can be supplied free of
charge by CARTONI, but the owner will bear the cost of transport/duty
charges for the parts.
The warranty is only valid if the tripod has been used properly as outlined
6
in the manufacturer’s instrucons and has not been exposed to any mis-
handling. The warranty will be immediately invalid if modicaons and/or
repairs are carried out by unauthorized persons otherwise authorized by
CARTONI.
Components subject to wear and tear are not covered by warranty.
The warranty is also invalidated by one of the following events:
Failure to comply with payment condions
Failure to carry out appropriate maintenance
Removal or mistreatment of marks and/or labels containing data
and technical specicaon
CARTONI accepts no responsibility for damage to the tripod caused by im-
proper use or the malfuncon of other equipment connected to the Cam-
era support.
In any case, the warranty only covers tripod damage and/or malfuncons
and does not entle the purchaser/owner to claim any damages for loss of
producon me due to assumed or proven damage caused by and/or con-
nected to the tripod itself.
1.2 authorIzed personnel
Extraordinary maintenance and repairs to the Sport 200 can only be carried
out by competent persons who are either employed, trained or authorized
by CARTONI in wring.
Any informaon regarding repair/maintenance service staons can be ob-
tained from CARTONI.
7
2. technIcal specIfIcatIons
2
11
3
10
5
8
6
4
9
7
1
12
Flat upper base
Level bubble
Central brace knob
Safety pin & housing
Mid-level spreader
Leg clamp knob
Orientable foot
Extendable leg
Tripod height reference
Mid-level spreader knob
Tripod leg
4 Peg holes
1
2
3
4
5
6
7
8
9
10
11
12
8
2.1 compatIble equIpment
The equipment used with the Sport 200 tripod should comply the
following specicaons:
Maximum weight: 200 Kg (441 lbs.)
Weight distribuon must verify that the centre of gravity (CG) of the
mounted elements stays well inside the opened tripod base diameter.
! CARTONI accepts no responsibility for malfuncons or
damage to persons or equipment, materials, etc. when
used with equipment other than those indicated in the
manual.
! DANGER: it is strictly forbidden to climb on the tripod.
2.2 specIfIcatIons
Payload (up to) 200 Kg 441 lbs
Total weight 10,5 Kg 23 lbs
Minimum height 57 cm 22 in.
Maximum height 115 cm 45 in.
Folded height 72 cm 28 in.
Folded width 25 cm 10 in.
Operaonal temperature -20°C / +60°C -4°F / +140°F
9
2.3 optIonal accessorIes
3. InstallatIon and settIngs
Prior to seng-up, please check the state of packaging for its integrity on
arrival, and also make sure that none of the components show signs of
impact. If any such damage occurs CARTONI should be informed immedi-
ately.
If the Sport 200 is to be forwarded elsewhere, it should be carefully packed
with care not to damage any of the components.
3.1 settIng the sport 200
Please set the CARTONI Sport 200 tripod as follows.
Release the central brace knob (3) and completely spread the tripod; then
lock in place with the same central brace knob (3).
4 Ways Leveller (AH896) Dolly HD (D736)
HD Ground Spreader (S732/HD)
10
! On open posion, the mid-level spreader remains in an-
gled posion; do not force to total horizontal posion.
To set the tripod height, remove the safety pins (4) from their safety hous-
ings (4) or if inserted, release the three leg clamp knobs (6), li the tripod
pulling up the upper at base (1) ll the desired height, then lock in place the
three extendable legs (8) with the three leg clamp knobs (6); the extendable
legs (8) have engraved height reference numbers (9) to set the height in the
three tripod legs uniformely. Finally, secure the tripod posion inserng the
three safety pins (4) in the upper holes on the extendable legs (8).
11
F
To obtain horizontal posion for the upper at base (1), release the extend-
able leg clamp knobs (6), check the level bubble (2) to horizontal posion
and lock in place all the legs with the three leg clamp knobs (6).
To widen the three tripod legs (11), release the three mid-level spreader
knobs (10), extend the mid-level spreader (5) and lock in place all the legs
with the three mid-level spreader knobs (10); for beer stability always ex-
tend the mid-level spreader (14) at maximum seng.
The orientable foot (7) has a recessed spike which can be extracted by ro-
tang the orientable foot. The spike extracon is suitable for so terrains
to ensure a beer grip.
12
Each foot has 4 holes for oponal Pegs
(12).
To install a dolly or a oor spreader, bend
the three feet (7) outwards in order to
access the tripod hooking bar.
3.2 mountIng a camera support head
The tripod at upper base (1) has a standard Mitchell base aachment and
4 holes for Vinten standard aachment; it accomodates a variety of camera
support heads and other devices.
4. safety precautIons
! The tripod has been designed to respect ergonomic
principles to allow operators to use it without any physi-
cal exeron. This includes working condions with min-
imum strain, movements, frequency of rounes to avoid
any physical and psycological discomfort.
! Tripod operators must take the utmost care to avoid
any acon that might endanger themselves, the tripod or
others.
13
Anyone who operates the tripod must be throughly trained in the correct
methods of use and its safety features.
The tripod must be used according to the instrucons indicated in this
manual.
5. dIsassemblIng and storage
! Before folding the tripod ensure that the load has been
removed.
To fold the tripod please proceed as follows. Remove the 3 safety pins (4)
from the legs (8) and place them in their housing (4).
Release the three leg clamp knobs (6), lower the tripod pulling down the
at upper base (1), then lock in place the three extendable legs (8) with the
three leg clamp knobs (6).
Release the three mid-level spreader knobs (10), close the mid-level spread-
er to its folded posion and lock in place the mid-level spreader legs (5)
with the three mid-level spreader knobs (10).
Release the central brace knob (3) and completely fold the tripod; then lock
in place with the same central brace knob (3).
14
6 servIce
The tripod has been designed and built in a way to reduce as much as pos-
sible any maintenance, and to ensure problem-free over me.
Aer any maintenance operaon, the tripod must be tested to ensure that
it is working properly.
6.1 routIne maIntenance
Sport 200 should be carefully periodically inspected and any damaged part
immediately replaced to prevent failures that might compromise the per-
sonnel’s safety and the tripod funconality.
Aer being exposed to rain, salted water, sand dust or mud the tripod
should be cleaned of all residues with clear water, compressed air and a
non abrasive cloth. Carefully dry before storing.
6.2 extra maIntenance and spare parts
Whatever extra maintenance requires to be carried out by CARTONIs own
technical servicing sta or an authorized service staon appointed by CAR-
TONI.
Informaon on authorized service staon sta can be obtained by contact-
ing CARTONI or
www.cartoni.com
For fast, eecve problem solving CARTONI should be informed of the
tripod model and the nature of the defect or its visible symptoms when the
problem arises.
15
! All maintenance on the tripod must be carried out by
competent and instructed personnel on the operave
and safety methods of the tripod; all warranty condions
are invalidated should any repair operaon be aempted
by anyone not authorized by CARTONI
! Items whose center of gravity (CG) is too close to the
opened tripod base diameter (Jib arms, Teleprompters,
ecc.) could cause the tripod to p over; use addional
precauon to avoid accidents.
6.3 decommIsIonIng
In case the tripod becomes beyond repair it should be placed out of service
or at least clearly labeled as “out of order”.
Since the tripod is largely made of aluminum and steel
most of its materials can be recycled.
Once a Sport 200 is decommissioned, it is advisable to separate its various
materials for dierenated ulizaon or disposal, according the naonal
regulaons. Since none of the materials used on the tripod are toxic or may
cause a risk to the health of its operators, they can be handled without the
need for any special precauons.
! The dismantling of the tripod at the end of its life must
be carried out by competent and trained personnel.
16
CARTONI S.p.A
Via di Portonaccio, 33/B - 00159 Rome (Italy)
Phone +39 06 4382002
Fax +39 06 43588293
cartoni.com
PROFESSIONAL CAMERA SUPPORT
April 2023
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Cartoni Sport 200 Manuale utente

Tipo
Manuale utente

in altre lingue