Contents
Safety information 2
Safety instructions 3
Product description 5
Before first use 5
Daily use 5
Clock functions
6
Additional functions
6
Hints and tips 7
Care and cleaning 12
Troubleshooting 14
Installation 15
Technical information 16
Energy efficiency
16
Subject to change without notice.
Safety information
Before the installation and use of the appliance, carefully read the
supplied instructions. The manufacturer is not responsible if an
incorrect installation and use causes injuries and damages.
Always keep the instructions with the appliance for future
reference.
Children and vulnerable people safety
• This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
• Do not let children play with the appliance.
• Keep all packaging away from children.
• Keep children and pets away from the appliance when it
operates or when it cools down. Accessible parts are hot.
• If the appliance has a child safety device, we recommend you
activate it.
• Cleaning and user maintenance shall not be made by children
without supervision.
• Children of less than 3 years should be kept away unless
continuously supervised.
General Safety
• Only a qualified person must install this appliance and replace
the cable.
2 www.zanussi.com
• Internally the appliance becomes hot when in operation. Do not
touch the heating elements that are in the appliance. Always
use oven gloves to remove or put in accessories or ovenware.
• Before maintenance cut the power supply.
• Ensure that the appliance is switched off before replacing the
lamp to avoid the possibility of electric shock.
• Do not use a steam cleaner to clean the appliance.
• Do not use harsh abrasive cleaners or sharp metal scrapers to
clean the glass door since they can scratch the surface, which
may result in shattering of the glass.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its Authorised Service Centre or similarly
qualified persons in order to avoid a hazard.
Safety instructions
Installation
WARNING!
Only a qualified person must install
this appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Obey the installation instruction supplied
with the appliance.
• Always be careful when you move the
appliance because it is heavy. Always wear
safety gloves.
• Do not pull the appliance by the handle.
• Keep the minimum distance from the other
appliances and units.
• Make sure that the appliance is installed
below and adjacent safe structures.
• The sides of the appliance must stay
adjacent to appliances or to units with the
same height.
Electrical connection
WARNING!
Risk of fire and electrical shock.
• All electrical connections should be made by
a qualified electrician.
• The appliance must be earthed.
• Make sure that the electrical information on
the rating plate agrees with the power
supply. If not, contact an electrician.
• Always use a correctly installed shockproof
socket.
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to the
mains plug and to the mains cable. Should
the mains cable need to be replaced, this
must be carried out by our Authorised
Service Centre.
• Do not let mains cables touch or come near
the appliance door, especially when the door
is hot.
• The shock protection of live and insulated
parts must be fastened in such a way that it
cannot be removed without tools.
• Connect the mains plug to the mains socket
only at the end of the installation. Make sure
that there is access to the mains plug after
the installation.
• If the mains socket is loose, do not connect
the mains plug.
• Do not pull the mains cable to disconnect
the appliance. Always pull the mains plug.
• Use only correct isolation devices: line
protecting cut-outs, fuses (screw type fuses
removed from the holder), earth leakage trips
and contactors.
• The electrical installation must have an
isolation device which lets you disconnect
the appliance from the mains at all poles.
The isolation device must have a contact
opening width of minimum 3 mm.
www.zanussi.com 3
• This appliance complies with the E.E.C.
Directives.
Use
WARNING!
Risk of injury, burns and electrical
shock or explosion.
• Use this appliance in a household only.
• Do not change the specification of this
appliance.
• Make sure that the ventilation openings are
not blocked.
• Do not let the appliance stay unattended
during operation.
• Deactivate the appliance after each use.
• Be careful when you open the appliance
door while the appliance is in operation. Hot
air can release.
• Do not operate the appliance with wet hands
or when it has contact with water.
• Do not apply pressure on the open door.
• Do not use the appliance as a work surface
or as a storage surface.
• Open the appliance door carefully. The use
of ingredients with alcohol can cause a
mixture of alcohol and air.
• Do not let sparks or open flames to come in
contact with the appliance when you open
the door.
• Do not put flammable products or items that
are wet with flammable products in, near or
on the appliance.
WARNING!
Risk of damage to the appliance.
• To prevent damage or discoloration to the
enamel:
– do not put ovenware or other objects in
the appliance directly on the bottom.
– do not put aluminium foil directly on the
bottom of the appliance.
– do not put water directly into the hot
appliance.
– do not keep moist dishes and food in the
appliance after you finish the cooking.
– be careful when you remove or install
the accessories.
• Discoloration of the enamel has no effect on
the performance of the appliance. It is not a
defect in the sense of the warranty law.
• Use a deep pan for moist cakes. Fruit juices
cause stains that can be permanent.
• This appliance is for cooking purposes only.
It must not be used for other purposes, for
example room heating.
• Always cook with the oven door closed.
Care and cleaning
WARNING!
Risk of injury, fire, or damage to the
appliance.
• Before maintenance, deactivate the
appliance and disconnect the mains plug
from the mains socket.
• Make sure the appliance is cold. There is the
risk that the glass panels can break.
• Replace immediately the door glass panels
when they are damaged. Contact the
Service.
• Be careful when you remove the door from
the appliance. The door is heavy!
• Clean regularly the appliance to prevent the
deterioration of the surface material.
• Remaining fat or food in the appliance can
cause fire.
• Clean the appliance with a moist soft cloth.
Only use neutral detergents. Do not use
abrasive products, abrasive cleaning pads,
solvents or metal objects.
• If you use an oven spray, obey the safety
instructions on the packaging.
• Do not clean the catalytic enamel (if
applicable) with any kind of detergent.
Internal light
• The type of light bulb or halogen lamp used
for this appliance is only for household
appliances. Do not use it for house lighting.
WARNING!
Risk of electrical shock.
• Before replacing the lamp, disconnect the
appliance from the power supply.
• Only use lamps with the same specifications.
Disposal
WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the mains
supply.
• Cut off the mains cable and discard it.
• Remove the door catch to prevent children
and pets to get closed in the appliance.
4 www.zanussi.com
Product description
General overview
5
4
3
2
1
321 64 5
8
7
9
10
11
1
Control panel
2
Power lamp / symbol / indicator
3
Knob for the oven functions
4
Knob for the timer
5
Knob for the temperature
6
Temperature lamp / symbol / indicator
7
Heating element
8
Lamp
9
Fan
10
Aqua cleaning container
11
Shelf positions
Accessories
• Wire shelf
For cookware, cake tins, roasts.
• Aluminium baking tray
For cakes and biscuits.
Before first use
WARNING!
Refer to Safety chapters.
Initial Cleaning
Remove all accessories from the appliance.
Refer to "Care and cleaning"
chapter.
Clean the appliance before first use.
Put the accessories back to their initial position.
Preheating
Preheat the empty appliance to burn off the
remaining grease.
1. Set the function and the maximum
temperature.
2. Let the appliance operate for 1 hour.
3. Set the function and the maximum
temperature.
4. Let the appliance operate for 15 minutes.
Accessories can become hotter than usual. The
appliance can emit an odour and smoke. This is
normal. Make sure that the airflow in the room is
sufficient.
Daily use
WARNING!
Refer to Safety chapters.
www.zanussi.com 5
Activating and deactivating the
appliance
It depends on the model if your
appliance has knob symbols,
indicators or lamps:
• The indicator comes on when the
oven heats up.
• The lamp comes on when the
appliance operates.
• The symbol shows whether the
knob controls the oven functions
or the temperature.
1. Turn the knob for the oven functions to
select an oven function.
2. Turn the knob for the temperature to select
a temperature.
3. To deactivate the appliance turn the knobs
for the oven functions and temperature to
the off position.
Oven Functions
Oven function Application
Off position The appliance is off.
Light To activate the lamp without a cooking function.
Conventional Cook-
ing / Aqua Cleaning
To bake and roast food on 1 shelf position.
For more information about Aqua Cleaning, refer to the chapter
"Care and cleaning".
Fan Cooking To roast or roast and bake food with the same cooking tempera-
ture, on more than 1 shelf position, without flavour transference.
Grilling To grill flat food and to toast bread.
Clock functions
Minute Minder
Use it to set a countdown time for an oven
function.
This function has no effect on the
operation of the appliance.
1. Set an oven function and the temperature.
2. Turn the knob for the timer as far as it goes,
then turn it to necessary time period.
After the time period is completed, an acoustic
signal sounds.
Additional functions
Cooling fan
When the appliance operates, the cooling fan
activates automatically to keep the surfaces of
the appliance cool. If you deactivate the
appliance, the cooling fan can continue to
operate until the appliance cools down.
Safety thermostat
Incorrect operation of the appliance or defective
components can cause dangerous overheating.
To prevent this, the oven has a safety
thermostat which interrupts the power supply.
The oven activates again automatically when the
temperature drops.
6 www.zanussi.com
Hints and tips
WARNING!
Refer to Safety chapters.
The temperature and baking times in
the tables are guidelines only. They
depend on the recipes and the
quality and quantity of the
ingredients used.
General information
• The appliance has five shelf positions. Count
the shelf positions from the bottom of the
appliance floor.
• The appliance has a special system which
circulates the air and constantly recycles the
steam. With this system you can cook in a
steamy environment and keep the food soft
inside and crusty outside. It decreases the
cooking time and energy consumption to a
minimum.
• Moisture can condense in the appliance or
on the door glass panels. This is normal.
Always stand back from the appliance when
you open the appliance door while cooking.
To decrease the condensation, operate the
appliance for 10 minutes before cooking.
• Clean the moisture after each use of the
appliance.
• Do not put the objects directly on the
appliance floor and do not put aluminium foil
on the components when you cook. This can
change the baking results and cause
damage to the enamel.
Baking cakes
• Do not open the oven door before 3/4 of the
set cooking time is up.
• If you use two baking trays at the same time,
keep one empty level between them.
Cooking meat and fish
• Use a deep pan for very fatty food to prevent
the oven from stains that can be permanent.
• Leave the meat for approximately 15 minutes
before carving so that the juice does not
seep out.
• To prevent too much smoke in the oven
during roasting, add some water into the
deep pan. To prevent the smoke
condensation, add water each time after it
dries up.
Cooking times
Cooking times depend on the type of food, its
consistency, and volume.
Initially, monitor the performance when you
cook. Find the best settings (heat setting,
cooking time, etc.) for your cookware, recipes
and quantities when you use this appliance.
Baking and roasting table
Cakes
Food Conventional Cooking Fan Cooking Time
(min)
Com-
ments
Tempera-
ture (°C)
Shelf po-
sition
Tempera-
ture (°C)
Shelf po-
sition
Whisked
recipes
170 2 160 3 45 - 60 In a cake
mould
Shortbread
dough
170 2 160 3 20 - 30 In a cake
mould
Buttermilk
cheesecake
170 1 160 1 70 - 80 In a 26 cm
cake mould
on a wire
shelf
www.zanussi.com 7
Food Conventional Cooking Fan Cooking Time
(min)
Com-
ments
Tempera-
ture (°C)
Shelf po-
sition
Tempera-
ture (°C)
Shelf po-
sition
Apple cake
(Apple pie)
1)
170 2 160 2 (left and
right)
80 - 100 In two 20 cm
cake moulds
on a wire
shelf
Strudel 175 3 150 2 60 - 80 In a baking
tray
Jam-tart 170 2 165 2 (left and
right)
30 - 40 In a 26 cm
cake mould
Sponge cake 170 2 160 2 50 - 60 In a 26 cm
cake mould
Christmas
cake / Rich
fruit cake
1)
160 2 150 2 90 - 120 In a 20 cm
cake mould
Plum cake
1)
175 1 160 2 50 - 60 In a bread tin
Small cakes
- one level
170 3 140 - 150 3 20 - 30 In a baking
tray
Small cakes
- two levels
- - 140 - 150 2 and 4 25 - 35 In a baking
tray
Biscuits /
pastry strips
- one level
140 3 140 - 150 3 30 - 35 In a baking
tray
Biscuits /
pastry strips
- two levels
- - 140 - 150 2 and 4 35 - 40 In a baking
tray
Meringues 120 3 120 3 80 - 100 In a baking
tray
Buns
1)
190 3 180 3 15 - 20 In a baking
tray
Eclairs 190 3 170 3 25 - 35 In a baking
tray
Plate tarts 180 2 170 2 45 - 70 In a 20 cm
cake mould
Rich fruit
cake
160 1 150 2 110 - 120 In a 24 cm
cake mould
8 www.zanussi.com
Food Conventional Cooking Fan Cooking Time
(min)
Com-
ments
Tempera-
ture (°C)
Shelf po-
sition
Tempera-
ture (°C)
Shelf po-
sition
Victoria
sandwich
1)
170 1 160 1 50 - 60 In a 20 cm
cake mould
1) Preheat the oven for 10 minutes.
Bread and pizza
Food Conventional Cooking Fan Cooking Time
(min)
Com-
ments
Tempera-
ture (°C)
Shelf po-
sition
Tempera-
ture (°C)
Shelf po-
sition
White bread
1)
190 1 190 1 60 - 70 1 - 2 pieces,
500 gr per
piece
Rye bread 190 1 180 1 30 - 45 In a bread tin
Pizza
1)
230 - 250 1 230 - 250 1 10 - 20 In a baking
tray or a
deep pan
Scones
1)
200 3 190 3 10 - 20 In a baking
tray
1) Preheat the oven for 10 minutes.
Flans
Food Conventional Cooking Fan Cooking Time
(min)
Com-
ments
Tempera-
ture (°C)
Shelf po-
sition
Tempera-
ture (°C)
Shelf po-
sition
Pasta flan 200 2 180 2 40 - 50 In a mould
Vegetable
flan
200 2 175 2 45 - 60 In a mould
Quiches
1)
180 1 180 1 50 - 60 In a mould
Lasagne
1)
180 - 190 2 180 - 190 2 25 - 40 In a mould
Cannelloni
1)
180 - 190 2 180 - 190 2 25 - 40 In a mould
1) Preheat the oven for 10 minutes.
www.zanussi.com 9
Meat
Food Conventional Cooking Fan Cooking Time
(min)
Com-
ments
Tempera-
ture (°C)
Shelf po-
sition
Tempera-
ture (°C)
Shelf po-
sition
Beef 200 2 190 2 50 - 70 On a wire
shelf
Pork 180 2 180 2 90 - 120 On a wire
shelf
Veal 190 2 175 2 90 - 120 On a wire
shelf
English roast
beef, rare
210 2 200 2 50 - 60 On a wire
shelf
English roast
beef, medi-
um
210 2 200 2 60 - 70 On a wire
shelf
English roast
beef, well
done
210 2 200 2 70 - 75 On a wire
shelf
Shoulder of
pork
180 2 170 2 120 - 150 With rind
Shin of pork 180 2 160 2 100 - 120 Two pieces
Lamb 190 2 175 2 110 - 130 Leg
Chicken 220 2 200 2 70 - 85 Whole
Turkey 180 2 160 2 210 - 240 Whole
Duck 175 2 220 2 120 - 150 Whole
Goose 175 2 160 1 150 - 200 Whole
Rabbit 190 2 175 2 60 - 80 Cut in
pieces
Hare 190 2 175 2 150 - 200 Cut in
pieces
Pheasant 190 2 175 2 90 - 120 Whole
10 www.zanussi.com
Fish
Food Conventional Cooking Fan Cooking Time
(min)
Com-
ments
Tempera-
ture (°C)
Shelf po-
sition
Tempera-
ture (°C)
Shelf po-
sition
Trout / Sea
bream
190 2 175 2 40 - 55 3 - 4 fish
Tuna fish /
Salmon
190 2 175 2 35 - 60 4 - 6 fillets
Grilling
Preheat the empty oven for 3
minutes before cooking.
Food Quantity Tempera-
ture (°C)
Time (min) Shelf po-
sition
Pieces (g) 1st side 2nd side
Fillet steaks 4 800 max. 12 - 15 12 - 14 4
Beef steaks 4 600 max. 10 - 12 6 - 8 4
Sausages 8 - max. 12 - 15 10 - 12 4
Pork chops 4 600 max. 12 - 16 12 - 14 4
Chicken (cut
in 2)
2 1000 max. 30 - 35 25 - 30 4
Kebabs 4 - max. 10 - 15 10 - 12 4
Breast of
chicken
4 400 max. 12 - 15 12 - 14 4
Hamburger 6 600 max. 20 - 30 - 4
Fish fillet 4 400 max. 12 - 14 10 - 12 4
Toasted
sandwiches
4 - 6 - max. 5 - 7 - 4
Toast 4 - 6 - max. 2 - 4 2 - 3 4
Drying - Fan Cooking
• Cover trays with grease proof paper or
baking parchment.
• For a better result, stop the oven halfway
through the drying time, open the door and
let it cool down for one night to complete the
drying.
www.zanussi.com 11
Vegetables
Food Temperature
(°C)
Time (h) Shelf position
1 position 2 positions
Beans 60 - 70 6 - 8 3 1 / 4
Peppers 60 - 70 5 - 6 3 1 / 4
Vegetables for sour 60 - 70 5 - 6 3 1 / 4
Mushrooms 50 - 60 6 - 8 3 1 / 4
Herbs 40 - 50 2 - 3 3 1 / 4
Fruit
Food Temperature
(°C)
Time (h) Shelf position
1 position 2 positions
Plums 60 - 70 8 - 10 3 1 / 4
Apricots 60 - 70 8 - 10 3 1 / 4
Apple slices 60 - 70 6 - 8 3 1 / 4
Pears 60 - 70 6 - 9 3 1 / 4
Care and cleaning
WARNING!
Refer to Safety chapters.
Notes on cleaning
• Clean the front of the appliance with a soft
cloth with warm water and a cleaning agent.
• To clean metal surfaces, use a usual
cleaning agent.
• Clean the appliance interior after each use.
Fat accumulation or other food remains may
result in a fire.
• Clean stubborn dirt with a special oven
cleaner.
• Clean all accessories after each use and let
them dry. Use a soft cloth with warm water
and a cleaning agent.
• If you have nonstick accessories, do not
clean them using aggressive agents, sharp-
edged objects or a dishwasher. It can cause
damage to the nonstick coating.
Stainless steel or aluminium appliances
Clean the oven door with a wet
sponge only. Dry it with a soft cloth.
Do not use steel wool, acids or
abrasive materials as they can
damage the oven surface. Clean the
oven control panel with the same
precautions.
Cleaning the door gasket
• Regularly do a check of the door gasket. The
door gasket is around the frame of the oven
cavity. Do not use the appliance if the door
gasket is damaged. Contact an Authorised
Service Centre.
• To clean the door gasket, refer to the
general information about cleaning.
12 www.zanussi.com
Aqua cleaning
The Aqua cleaning procedure uses steam to
help remove remaining fat and food particles
from the oven.
1. Put 300 ml of water into the Aqua cleaning
container at the bottom of the oven.
2. Set the function .
3. Set the temperature to 90 °C.
4. Let the appliance operate for 30 minutes.
5. Deactivate the appliance and let it cool
down.
6. When the appliance is cool, clean the inner
surfaces of the oven with a cloth.
WARNING!
Make sure that the appliance is
cool before you touch it. There is
a risk of burns.
Cleaning the oven door
The oven door has two glass panels. You can
remove the oven door and the internal glass
panel to clean it.
The oven door can close if you try to
remove the internal glass panel
before you remove the oven door.
CAUTION!
Do not use the appliance without the
internal glass panel.
1
Open the door fully
and hold the two
door hinges.
1
2
Lift and turn the
levers on the two
hinges.
2
3
Close the oven door
halfway to the first
opening position.
Then pull forward and
remove the door from
its seat.
3
4
Put the door on a soft
cloth on a stable
surface.
4
5
Release the locking
system to remove the
internal glass panel.
5
90°
6
Turn the two
fasteners by 90° and
remove them from
their seats.
6
2
1
7
First lift carefully and
then remove the
glass panel.
7
Clean the glass panel with water and soap. Dry
the glass panel carefully.
When the cleaning is completed, install the
glass panel and the oven door. Do the above
steps in the opposite sequence.
The screen-printing zone must face the inner
side of the door. Make sure that after the
installation the surface of the glass panel frame
on the screen-printing zones is not rough when
you touch it.
Make sure that you install the internal glass
panel in the seats correctly.
www.zanussi.com 13
Replacing the lamp
Put a cloth on the bottom of the interior of the
appliance. It prevents damage to the lamp glass
cover and the cavity.
WARNING!
Danger of electrocution! Disconnect
the fuse before you replace the
lamp.
The lamp and the lamp glass cover
can be hot.
CAUTION!
Always hold the halogen lamp with a
cloth to prevent grease residue from
burning on the lamp.
1. Deactivate the appliance.
2. Remove the fuses from the fuse box or
deactivate the circuit breaker.
The back lamp
1. Turn the lamp glass cover counterclockwise
to remove it.
2. Clean the glass cover.
3. Replace the lamp with a suitable 300 °C
heat-resistant lamp.
4. Install the glass cover.
Troubleshooting
WARNING!
Refer to Safety chapters.
What to do if...
Problem Possible cause Remedy
The oven does not heat up. The oven is deactivated. Activate the oven.
The oven does not heat up. The fuse is released. Make sure that the fuse is the
cause of the malfunction. If the
fuse releases again and again,
contact a qualified electrician.
The lamp does not operate. The lamp is defective. Replace the lamp.
Steam and condensation settle
on the food and in the cavity of
the oven.
You left the dish in the oven for
too long.
Do not leave the dishes in the
oven for longer than 15 - 20 mi-
nutes after the cooking process
ends.
Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the appliance cavity. Do not remove
the rating plate from the appliance cavity.
14 www.zanussi.com
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
Installation
WARNING!
Refer to Safety chapters.
Building In
3
6
589
594
114
16
21
548
573
min. 550
20
6
600
558
min. 560
min. 550
20
589
594
114
16
21
548
573
580
min. 560
558
9
Securing the appliance to the cabinet
A
B
Electrical installation
The manufacturer is not responsible
if you do not follow the safety
precautions from the Safety
chapters.
This appliance is supplied only with a main
cable.
Cable
Cable types applicable for installation or
replacement:
H07 RN-F, H05 RN-F, H05 RRF, H05 VV-F,
H05 V2V2-F (T90), H05 BB-F
For the section of the cable refer to the total
power on the rating plate and to the table:
www.zanussi.com 15
Total power (W) Section of the ca-
ble (mm²)
maximum 1380 3 x 0.75
maximum 2300 3 x 1
maximum 3680 3 x 1.5
The earth cord (green / yellow cable) must be 2
cm longer than phase and neutral cables (blue
and brown cables).
Technical information
Technical data
Voltage 230 V
Frequency 50 / 60 Hz
Energy efficiency
Product Fiche and information according to EU 65-66/2014
Supplier's name Zanussi
Model identification
ZOB21301CR
ZOB21301LR
Energy Efficiency Index 104.8
Energy efficiency class A
Energy consumption with a standard load, conventional mode 0.89 kWh/cycle
Energy consumption with a standard load, fan-forced mode 0.88 kWh/cycle
Number of cavities 1
Heat source Electricity
Volume 68 l
Type of oven Built-In Oven
Mass
ZOB21301CR 29.8 kg
ZOB21301LR 29.8 kg
EN 60350-1 - Household electric cooking
appliances - Part 1: Ranges, ovens, steam
ovens and grills - Methods for measuring
performance.
Energy saving
The appliance contains features which help you
save energy during everyday cooking.
• General hints
– Make sure that the oven door is closed
properly when the appliance operates
and keep it closed as much as possible
during the cooking.
– Use metal dishes to improve the energy
saving.
– When possible, put the food inside the
oven without heating it up.
– When the cooking duration is longer
than 30 minutes, reduce the oven
temperature to minimum, 3 - 10 minutes
16 www.zanussi.com
before the end of the cooking time,
depending on the duration of the
cooking. The residual heat inside the
oven will continue to cook.
– Use the residual heat to warm up other
foods.
• Cooking with fan - when possible, use the
cooking functions with fan to save energy.
• Keep food warm - if you want to use the
residual heat to keep the meal warm, choose
the lowest possible temperature setting.
ENVIRONMENT CONCERNS
Recycle the materials with the symbol . Put
the packaging in applicable containers to
recycle it. Help protect the environment and
human health and to recycle waste of electrical
and electronic appliances. Do not dispose
appliances marked with the symbol with the
household waste. Return the product to your
local recycling facility or contact your municipal
office.
www.zanussi.com 17
Indice
Informazioni per la sicurezza 18
Istruzioni di sicurezza 19
Descrizione del prodotto 21
Preparazione al primo utilizzo 22
Utilizzo quotidiano 22
Funzioni del timer
23
Funzioni aggiuntive
23
Consigli e suggerimenti utili 23
Pulizia e cura 30
Risoluzione dei problemi 32
Installazione 33
Dati tecnici 34
Efficienza energetica
34
Con riserva di modifiche.
Informazioni per la sicurezza
Leggere attentamente le istruzioni fornite prima di installare e
utilizzare l'apparecchiatura. Il produttore non è responsabile se
un'installazione ed un uso non corretto dell'apparecchiatura
provocano lesioni e danni. Tenere sempre le istruzioni a portata di
mano come riferimento futuro.
Sicurezza dei bambini e delle persone vulnerabili
• Questa apparecchiatura può essere usata da bambini a partire
dagli 8 anni e da adulti con limitate capacità fisiche, sensoriali o
mentali o con scarsa esperienza o conoscenza sull'uso
dell'apparecchiatura, solamente se sorvegliati o se istruiti
relativamente all'uso dell'apparecchiatura e se hanno compreso
i rischi coinvolti.
• Non consentire ai bambini di giocare con l'apparecchiatura.
• Tenere i materiali di imballaggio al di fuori della portata dei
bambini.
• Tenere i bambini e gli animali domestici lontano
dall'apparecchiatura durante il funzionamento o raffreddamento.
Le parti accessibili sono incandescenti.
• Se l’apparecchiatura dispone di un dispositivo di sicurezza per i
bambini, consigliamo di attivarlo.
• La pulizia e gli interventi di manutenzione non devono essere
eseguiti dai bambini senza supervisione.
• Tenere lontani i bambini al di sotto dei 3 anni se non
costantemente supervisionati.
18 www.zanussi.com
Avvertenze di sicurezza generali
• L'installazione dell'apparecchiatura e la sostituzione dei cavi
deve essere svolta unicamente da personale qualificato.
• All'interno l'apparecchiatura si scalda mentre è in funzione. Non
toccare le resistenze dell'apparecchiatura. Servirsi sempre degli
appositi guanti da forno per estrarre o inserire accessori o
pentole resistenti al calore.
• Prima di eseguire qualsiasi intervento di manutenzione,
scollegare l'apparecchiatura dalla rete elettrica.
• Assicurarsi che l’apparecchiatura sia spenta prima di sostituire
la lampadina per evitare la possibilità di scosse elettriche.
• Non usare una pulitrice a vapore per pulire l'apparecchiatura.
• Non utilizzare detergenti abrasivi o raschietti di metallo per
pulire il vetro della porta per non rigare la superficie e causare
la rottura del vetro.
• Se il cavo di alimentazione è danneggiato, deve essere
sostituito dal produttore, da un tecnico autorizzato o da una
persona qualificata per evitare situazioni di pericolo.
Istruzioni di sicurezza
Installazione
ATTENZIONE!
L’installazione dell'apparecchiatura
deve essere eseguita da personale
qualificato.
• Rimuovere tutti i materiali di imballaggio.
• Non installare o utilizzare l'apparecchiatura
se è danneggiata.
• Attenersi alle istruzioni fornite insieme
all'apparecchiatura.
• Prestare sempre attenzione in fase di
spostamento dell'apparecchiatura, dato che
è molto pesante. Indossare sempre guanti di
sicurezza.
• Non tirare l’apparecchiatura per la maniglia.
• È necessario rispettare la distanza minima
dalle altre apparecchiature.
• Assicurarsi che l'apparecchiatura sia
installata sotto e vicino a parti
adeguatamente ancorate a una struttura
fissa.
• I lati dell'apparecchiatura devono restare
adiacenti ad apparecchiature o unità con la
stessa altezza.
Collegamento elettrico
ATTENZIONE!
Rischio di incendio e scossa
elettrica.
• Tutti i collegamenti elettrici devono essere
realizzati da un elettricista qualificato.
• L'apparecchiatura deve disporre di una
messa a terra.
• Verificare che i dati elettrici riportati sulla
targhetta dei dati corrispondano a quelli
dell'impianto. In caso contrario, contattare un
elettricista.
• Utilizzare sempre una presa elettrica con
contatto di protezione correttamente
installata.
• Non utilizzare prese multiple e prolunghe.
• Accertarsi di non danneggiare la spina e il
cavo. Qualora il cavo elettrico debba essere
sostituito, l’intervento dovrà essere effettuato
dal nostro Centro di Assistenza autorizzato.
www.zanussi.com 19
• Evitare che i cavi entrino a contatto o si
trovino vicino alla porta dell'apparecchiatura,
in particolare quando la porta è calda.
• I dispositivi di protezione da scosse
elettriche devono essere fissati in modo tale
da non poter essere disattivati senza l'uso di
attrezzi.
• Inserire la spina di alimentazione nella presa
solo al termine dell'installazione. Verificare
che la spina di alimentazione rimanga
accessibile dopo l'installazione.
• Nel caso in cui la spina di corrente sia
allentata, non collegarla alla presa.
• Non tirare il cavo di alimentazione per
scollegare l’apparecchiatura. Tirare sempre
dalla spina.
• Servirsi unicamente di dispositivi di
isolamento adeguati: interruttori automatici,
fusibili (quelli a tappo devono essere rimossi
dal portafusibile), sganciatori per correnti di
guasto a terra e relè.
• L'impianto elettrico deve essere dotato di un
dispositivo di isolamento che consenta di
scollegare l'apparecchiatura dalla presa di
corrente a tutti i poli. Il dispositivo di
isolamento deve avere una larghezza
dell'apertura di contatto non inferiore ai 3
mm.
• Questa apparecchiatura è conforme alle
direttive CEE.
Utilizzo
ATTENZIONE!
Rischio di lesioni, ustioni, scosse
elettriche o esplosioni.
• Utilizzare l’apparecchiatura esclusivamente
in un ambiente domestico.
• Non apportare modifiche alle specifiche di
questa apparecchiatura.
• Accertarsi che le fessure di ventilazione non
siano ostruite.
• Non lasciare mai l'apparecchiatura
incustodita durante il funzionamento.
• Spegnere l'apparecchiatura dopo ogni
utilizzo.
• Prestare attenzione in fase di apertura della
porta dell'apparecchiatura quando
quest'ultima è in funzione. Può fuoriuscire
aria calda.
• Non mettere in funzione l'apparecchiatura
con le mani umide o quando c'è un contatto
con l'acqua.
• Non esercitare pressione sulla porta aperta.
• Non utilizzare l'apparecchiatura come
superficie di lavoro o come piano di
appoggio.
• Aprire la porta dell'apparecchiatura con
cautela. L'uso di ingredienti contenenti alcol
può causare una miscela di alcol e aria.
• Evitare la presenza di scintille o fiamme
aperte vicino all'apparecchiatura quando si
apre la porta.
• Non appoggiare o tenere liquidi o materiali
infiammabili, né oggetti facilmente
incendiabili sull'apparecchiatura, al suo
interno o nelle immediate vicinanze.
ATTENZIONE!
Vi è il rischio di danneggiare
l'apparecchiatura.
• Per evitare danni o scolorimento dello
smalto:
– Non mettere pentole resistenti al calore
o altri oggetti direttamente sulla
superficie inferiore dell'apparecchiatura.
– Non appoggiare la pellicola di alluminio
direttamente sulla superficie inferiore
dell'apparecchiatura.
– Non mettere direttamente acqua
all'interno dell'apparecchiatura calda.
– Non tenere piatti umidi e cibo all'interno
dell'apparecchiatura dopo aver terminato
la fase di cottura.
– Prestare attenzione quando si tolgono o
inseriscono gli accessori.
• Lo scolorimento dello smalto non influisce
sulle prestazioni dell'apparecchiatura. Non si
tratta di un'anomalia ai sensi di legge.
• Per le torte molto umide, usare una leccarda.
I succhi di frutta provocano macchie che
possono essere permanenti.
• L'apparecchiatura è destinata solo alla
cottura. Non deve essere utilizzata per altri
scopi, come per esempio il riscaldamento di
un ambiente.
• La cottura deve sempre essere eseguita con
la porta del forno chiusa.
Pulizia e cura
ATTENZIONE!
Vi è il rischio di lesioni, incendio o
danni all'apparecchiatura.
• Prima di eseguire qualunque intervento di
manutenzione, spegnere l'apparecchiatura
ed estrarre la spina dalla presa.
20 www.zanussi.com
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
Zanussi ZOB21301LR Manuale utente
- Tipo
- Manuale utente
- Questo manuale è adatto anche per
in altre lingue
- English: Zanussi ZOB21301LR User manual
Documenti correlati
-
Zanussi ZOB21301BK Manuale utente
-
-
-
-
-
-
-
-
Zanussi ZOB22601XK Manuale utente
-
Zanussi ZOB22601BK Manuale utente
