Zanussi ZOB10401XK Manuale utente

Tipo
Manuale utente

Questo manuale è adatto anche per

User Manual 2
Istruzioni per l’uso 17
EN
IT
ZOB10401
Oven
Forno
Contents
Safety information 2
Safety instructions 3
Product description 5
Before first use 5
Daily use 6
Using the accessories
6
Additional functions
7
Hints and tips 7
Care and cleaning 11
Troubleshooting 13
Installation 13
Technical data 15
Energy efficiency
15
Subject to change without notice.
Safety information
Before the installation and use of the appliance, carefully read the
supplied instructions. The manufacturer is not responsible for any
injuries or damages that are the result of incorrect installation or
usage. Always keep the instructions in a safe and accessible
location for future reference.
Children and vulnerable people safety
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning the use of the
appliance in a safe way and understand the hazards involved.
Do not let children play with the appliance.
Keep all packaging away from children and dispose of it
appropriately.
Keep children and pets away from the appliance when it
operates or when it cools down. Accessible parts are hot.
If the appliance has a child safety device, this should be
activated.
Children shall not carry out cleaning and user maintenance of
the appliance without supervision.
Children aged 3 years and under must be kept away from this
appliance when it is in operation at all times.
General Safety
Only a qualified person must install this appliance and replace
the cable.
2 www.zanussi.com
WARNING: The appliance and its accessible parts become hot
during use. Care should be taken to avoid touching heating
elements. Children less than 8 years of age shall be kept away
unless continuously supervised.
Always use oven gloves to remove or put in accessories or
ovenware.
Before maintenance cut the power supply.
Ensure that the appliance is switched off before replacing the
lamp to avoid the possibility of electric shock.
Do not use a steam cleaner to clean the appliance.
Do not use harsh abrasive cleaners or sharp metal scrapers to
clean the glass door since they can scratch the surface, which
may result in shattering of the glass.
If the mains power supply cable is damaged, it must be
replaced by the manufacturer, its Authorised Service Centre or
similarly qualified persons to avoid an electrical hazard.
Safety instructions
Installation
WARNING!
Only a qualified person must install
this appliance.
Remove all the packaging.
Do not install or use a damaged appliance.
Follow the installation instruction supplied
with the appliance.
Always take care when moving the appliance
as it is heavy. Always use safety gloves and
enclosed footwear.
Do not pull the appliance by the handle.
Keep the minimum distance from the other
appliances and units.
Make sure that the appliance is installed
below and adjacent safe structures.
The sides of the appliance must stay
adjacent to appliances or to units with the
same height.
The appliance is equipped with an electric
cooling system. It must be operated with the
electric power supply.
Electrical connection
WARNING!
Risk of fire and electrical shock.
All electrical connections should be made by
a qualified electrician.
The appliance must be earthed.
Make sure that the electrical information on
the rating plate agrees with the power
supply. If not, contact an electrician.
Always use a correctly installed shockproof
socket.
Do not use multi-plug adapters and
extension cables.
Make sure not to cause damage to the
mains plug and to the mains cable. Should
the mains cable need to be replaced, this
must be carried out by our Authorised
Service Centre.
Do not let mains cables touch or come near
the appliance door, especially when the door
is hot.
The shock protection of live and insulated
parts must be fastened in such a way that it
cannot be removed without tools.
Connect the mains plug to the mains socket
only at the end of the installation. Make sure
that there is access to the mains plug after
the installation.
If the mains socket is loose, do not connect
the mains plug.
Do not pull the mains cable to disconnect
the appliance. Always pull the mains plug.
www.zanussi.com 3
Use only correct isolation devices: line
protecting cut-outs, fuses (screw type fuses
removed from the holder), earth leakage trips
and contactors.
The electrical installation must have an
isolation device which lets you disconnect
the appliance from the mains at all poles.
The isolation device must have a contact
opening width of minimum 3 mm.
This appliance complies with the E.E.C.
Directives.
Use
WARNING!
Risk of injury, burns and electrical
shock or explosion.
This appliance is for household use only.
Do not change the specification of this
appliance.
Make sure that the ventilation openings are
not blocked.
Do not let the appliance stay unattended
during operation.
Deactivate the appliance after each use.
Be careful when you open the appliance
door while the appliance is in operation. Hot
air can release.
Do not operate the appliance with wet hands
or when it has contact with water.
Do not apply pressure on the open door.
Do not use the appliance as a work surface
or as a storage surface.
Open the appliance door carefully. The use
of ingredients with alcohol can cause a
mixture of alcohol and air.
Do not let sparks or open flames to come in
contact with the appliance when you open
the door.
Do not put flammable products or items that
are wet with flammable products in, near or
on the appliance.
Do not use microwave function to preheat
the oven.
WARNING!
Risk of damage to the appliance.
To prevent damage or discoloration to the
enamel:
do not put ovenware or other objects in
the appliance directly on the bottom.
do not put aluminium foil directly on the
bottom of the appliance.
do not put water directly into the hot
appliance.
do not keep moist dishes and food in the
appliance after you finish the cooking.
be careful when you remove or install
the accessories.
Discoloration of the enamel has no effect on
the performance of the appliance.
Use a deep pan for moist cakes. Fruit juices
cause stains that can be permanent.
This appliance is for cooking purposes only.
It must not be used for other purposes, for
example room heating.
Always cook with the oven door closed.
If the appliance is installed behind a furniture
panel (e.g. a door) make sure the door is
never closed when the appliance is in
operation. Heat and moisture can build up
behind a closed furniture panel and cause
subsequent damage to the appliance, the
housing unit or the floor. Do not close the
furniture panel until the appliance has cooled
down completely after use.
Care and cleaning
WARNING!
Risk of injury, fire, or damage to the
appliance.
Before maintenance, deactivate the
appliance and disconnect the mains plug
from the mains socket.
Make sure the appliance is cold. There is the
risk that the glass panels can break.
Replace immediately the door glass panels
when they are damaged. Contact the
Authorised Service Centre.
Be careful when you remove the door from
the appliance. The door is heavy!
Clean regularly the appliance to prevent the
deterioration of the surface material.
Clean the appliance with a moist soft cloth.
Only use neutral detergents. Do not use any
abrasive products, abrasive cleaning pads,
solvents or metal objects.
If you use an oven spray, obey the safety
instructions on the packaging.
Do not clean the catalytic enamel (if
applicable) with any kind of detergent.
Internal light
The type of light bulb or halogen lamp used
for this appliance is only for household
appliances. Do not use it for house lighting.
WARNING!
Risk of electrical shock.
4 www.zanussi.com
Before replacing the lamp, disconnect the
appliance from the power supply.
Only use lamps with the same specifications.
Disposal
WARNING!
Risk of injury or suffocation.
Disconnect the appliance from the mains
supply.
Cut off the mains electrical cable close to
the appliance and dispose of it.
Remove the door catch to prevent children
or pets from becoming trapped in the
appliance.
Service
To repair the appliance contact an
Authorised Service Centre.
Use original spare parts only.
Product description
General overview
5
6
7
4
3
2
1
8
21 3 4
1
Control panel
2
Temperature indicator / symbol
3
Knob for the temperature
4
Knob for the oven functions
5
Air vents for the cooling fan
6
Heating element
7
Lamp
8
Shelf positions
Accessories
Wire shelf
For cookware, cake tins, roasts.
Baking tray
For cakes and biscuits.
Before first use
WARNING!
Refer to Safety chapters.
Initial Cleaning
Remove all accessories from the appliance.
Refer to "Care and cleaning"
chapter.
Clean the appliance and the accessories before
first use.
Put the accessories back to their initial position.
Preheating
Preheat the empty appliance to burn off the
remaining grease.
1. Set the function and the maximum
temperature.
2. Let the appliance operate for 1 hour.
3. Set the function and set the maximum
temperature.
4. Let the appliance operate for 15 minutes.
Accessories can become hotter than usual. The
appliance can emit an odour and smoke. This is
normal. Make sure that the airflow in the room is
sufficient.
www.zanussi.com 5
Daily use
WARNING!
Refer to Safety chapters.
Activating and deactivating the
appliance
It depends on the model if your
appliance has lamps, knob
symbols or indicators:
The lamp comes on when the
appliance operates.
The symbol shows whether the
knob controls the oven functions
or the temperature.
The indicator comes on when the
oven heats up.
1. Turn the knob for the oven functions to
select an oven function.
2. Turn the knob for the temperature to select
a temperature.
3. To deactivate the appliance turn the knobs
for the oven functions and temperature to
the off position.
Oven functions
Oven function Application
Off position The appliance is off.
Top / Bottom Heat To bake and roast food on 1 shelf position.
Top Heat To brown bread, cakes and pastries. To finish cooked dishes.
Bottom Heat To bake cakes with crispy bottom and to preserve food.
Grilling To grill flat food and to toast bread.
Using the accessories
WARNING!
Refer to Safety chapters.
Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of the
shelf support and make sure that the feet point
down.
Baking tray:
Push the baking tray between the guide bars of
the shelf support.
6 www.zanussi.com
Additional functions
Cooling fan
When the appliance operates, the cooling fan
activates automatically to keep the surfaces of
the appliance cool. If you deactivate the
appliance, the cooling fan stops.
Safety thermostat
Incorrect operation of the appliance or defective
components can cause dangerous overheating.
To prevent this, the oven has a safety
thermostat which interrupts the power supply.
The oven activates again automatically when the
temperature drops.
Hints and tips
WARNING!
Refer to Safety chapters.
The temperature and baking times in
the tables are guidelines only. They
depend on the recipes and the
quality and quantity of the
ingredients used.
General information
The appliance has four shelf positions.
Count the shelf positions from the bottom of
the appliance floor.
Moisture can condense in the appliance or
on the door glass panels. This is normal.
Always stand back from the appliance when
you open the appliance door while cooking.
To decrease the condensation, operate the
appliance for 10 minutes before cooking.
Clean the moisture after each use of the
appliance.
Do not put the objects directly on the
appliance floor and do not put aluminium foil
on the components when you cook. This can
change the baking results and cause
damage to the enamel.
Baking cakes
Do not open the oven door before 3/4 of the
set cooking time is up.
If you use two baking trays at the same time,
keep one empty level between them.
Cooking meat and fish
Use a deep pan for very fatty food to prevent
the oven from stains that can be permanent.
Leave the meat for approximately 15 minutes
before carving so that the juice does not
seep out.
To prevent too much smoke in the oven
during roasting, add some water into the
deep pan. To prevent the smoke
condensation, add water each time after it
dries up.
Cooking times
Cooking times depend on the type of food, its
consistency, and volume.
Initially, monitor the performance when you
cook. Find the best settings (heat setting,
cooking time, etc.) for your cookware, recipes
and quantities when you use this appliance.
www.zanussi.com 7
Baking and roasting table
Cakes
Food Top / Bottom Heat Time (min) Comments
Temperature
(°C)
Shelf position
Whisked recipes 170 2 45 - 60 In a cake mould
Shortbread dough 170 2 24 - 34 In a cake mould
Butter-milk cheese
cake
170 1 60 - 80 In a 26 cm cake
mould
Apple cake (Apple
pie)
170 1 100 - 120 In two 20 cm cake
moulds on a wire
shelf
Strudel 175 2 60 - 80 In a baking tray
Jam-tart 170 2 30 - 40 In a 26 cm cake
mould
Fruit cake 170 2 60 - 70 In a 26 cm cake
mould
Sponge cake (Fat-
less sponge cake)
170 2 35 - 45 In a 26 cm cake
mould
Christmas cake /
Rich fruit cake
170 2 50 - 60 In a 20 cm cake
mould
Plum cake
1)
170 2 50 - 60 In a bread tin
Small cakes 170 3 20 - 30 In a baking tray
Biscuits
1)
150 3 20 - 30 In a baking tray
Meringues 100 3 90 - 120 In a baking tray
Buns
1)
190 3 15 - 20 In a baking tray
Choux
1)
190 3 25 - 35 In a baking tray
Plate tarts 180 3 45 - 70 In a 20 cm cake
mould
Victoria sandwich 180 1 or 2 40 - 55 Left + right in a 20
cm cake mould
1) Preheat the oven for 10 minutes.
8 www.zanussi.com
Bread and pizza
Food Top / Bottom Heat Time (min) Comments
Temperature
(°C)
Shelf position
White bread
1)
190 1 60 - 70 1 - 2 pieces, 500
gr one piece
Rye bread 190 1 30 - 45 In a bread tin
Bread rolls
1)
190 2 25 - 40 6 - 8 rolls in a bak-
ing tray
Pizza
1)
190 1 20 - 30 On a deep pan
Scones
1)
200 3 10 - 20 In a baking tray
1) Preheat the oven for 10 minutes.
Flans
Food Top / Bottom Heat Time (min) Comments
Temperature
(°C)
Shelf position
Pasta flan 180 2 40 - 50 In a mould
Vegetable flan 200 2 45 - 60 In a mould
Quiches 190 1 40 - 50 In a mould
Lasagne 200 2 25 - 40 In a mould
Cannelloni 200 2 25 - 40 In a mould
Yorkshire pudding
1)
220 2 20 - 30 6 pudding mould
1) Preheat the oven for 10 minutes.
Meat
Food Top / Bottom Heat Time (min) Comments
Temperature
(°C)
Shelf position
Beef 200 2 50 - 70 On a wire shelf
and a deep pan
Pork 180 2 90 - 120 On a wire shelf
and a deep pan
Veal 190 2 90 - 120 On a wire shelf
and a deep pan
www.zanussi.com 9
Food Top / Bottom Heat Time (min) Comments
Temperature
(°C)
Shelf position
English roast beef
rare
210 2 44 - 50 On a wire shelf
and a deep pan
English roast beef
medium
210 2 51 - 55 On a wire shelf
and a deep pan
English roast beef
well done
210 2 55 - 60 On a wire shelf
and a deep pan
Shoulder of pork 180 2 120 - 150 On a deep pan
Shin of pork 180 2 100 - 120 2 pieces on a deep
an
Lamb 190 2 110 - 130 Leg
Chicken 200 2 70 - 85 Whole on a deep
pan
Turkey 180 1 210 - 240 Whole on a deep
pan
Duck 175 2 120 - 150 Whole on a deep
pan
Goose 175 1 150 - 200 Whole on a deep
pan
Rabbit 190 2 60 - 80 Cut in pieces
Hare 190 2 150 - 200 Cut in pieces
Pheasant 190 2 90 - 120 Whole on a deep
pan
Fish
Food Top / Bottom Heat Time (min) Comments
Temperature
(°C)
Shelf position
Trout / Sea bream 190 2 40 - 55 3 - 4 fishes
Tuna fish / Salmon 190 2 35 - 60 4 - 6 fillets
Grilling
Preheat the empty oven for 10
minutes before cooking.
10 www.zanussi.com
Food Quantity Tempera-
ture (°C)
Time (min) Shelf po-
sition
Pieces (g) 1st side 2nd side
Fillet steaks 4 800 250 12 - 15 12 - 14 3
Beef steaks 4 600 250 10 - 12 6 - 8 3
Sausages 8 - 250 12 - 15 10 - 12 3
Pork chops 4 600 250 12 - 16 12 - 14 3
Chicken (cut
in 2)
2 1000 250 30 - 35 25 - 30 3
Kebabs 4 - 250 10 - 15 10 - 12 3
Breast of
chicken
4 400 250 12 - 15 12 - 14 3
Hamburger 6 600 250 20 - 30 - 3
Fish fillet 4 400 250 12 - 14 10 - 12 3
Toasted
sandwiches
4 - 6 - 250 5 - 7 - 3
Toast 4 - 6 - 250 2 - 4 2 - 3 3
Care and cleaning
WARNING!
Refer to Safety chapters.
Notes on cleaning
Clean the front of the appliance with a soft
cloth with warm water and a cleaning agent.
To clean metal surfaces, use a dedicated
cleaning agent.
Clean the appliance interior after each use.
Fat accumulation or other food remains may
result in a fire.
Clean stubborn dirt with a special oven
cleaner.
Clean all accessories after each use and let
them dry. Use a soft cloth with warm water
and a cleaning agent.
If you have nonstick accessories, do not
clean them using aggressive agents, sharp-
edged objects or a dishwasher. It can cause
damage to the nonstick coating.
Stainless steel or aluminium appliances
Clean the oven door with a damp
cloth or sponge only. Dry it with a
soft cloth.
Do not use steel wool, acids or
abrasive materials as they can
damage the oven surface. Clean the
oven control panel with the same
precautions.
Cleaning the door gasket
Regularly do a check of the door gasket. The
door gasket is around the frame of the oven
cavity. Do not use the appliance if the door
gasket is damaged. Contact an Authorised
Service Centre.
To clean the door gasket, refer to the
general information about cleaning.
Cleaning the oven door
The oven door has two glass panels. You can
remove the oven door and the internal glass
panel to clean it.
www.zanussi.com 11
The oven door can close if you try to
remove the internal glass panel
before you remove the oven door.
CAUTION!
Do not use the appliance without the
internal glass panel.
Open the door fully
and hold the two
door hinges.
1
Lift and turn the
levers on the two
hinges.
2
Close the oven door
halfway to the first
opening position.
Then pull forward and
remove the door from
its seat.
3
Put the door on a soft
cloth on a stable
surface.
4
Release the locking
system to remove the
internal glass panel.
5
90°
Turn the two
fasteners by 90° and
remove them from
their seats.
6
2
1
First lift carefully and
then remove the
glass panel.
7
Clean the glass panel with water and soap. Dry
the glass panel carefully.
When the cleaning is completed, install the
glass panel and the oven door. Do the above
steps in the opposite sequence.
The screen-printing zone must face the inner
side of the door. Make sure that after the
installation the surface of the glass panel frame
on the screen-printing zones is not rough when
you touch it.
Make sure that you install the internal glass
panel in the seats correctly.
Replacing the lamp
Put a cloth on the bottom of the interior of the
appliance. It prevents damage to the lamp glass
cover and the cavity.
WARNING!
Danger of electrocution! Disconnect
the fuse before you replace the
lamp.
The lamp and the lamp glass cover
can be hot.
1. Deactivate the appliance.
2. Remove the fuses from the fuse box or
deactivate the circuit breaker.
The back lamp
12 www.zanussi.com
1. Turn the lamp glass cover counterclockwise
to remove it.
2. Clean the glass cover.
3. Replace the lamp with a suitable 300 °C
heat-resistant lamp.
4. Install the glass cover.
Troubleshooting
WARNING!
Refer to Safety chapters.
What to do if...
Problem Possible cause Remedy
The oven does not heat up. The oven is deactivated. Activate the oven.
The oven does not heat up. The fuse is blown. Make sure that the fuse is the
cause of the malfunction. If the
fuse is blown again and again,
contact a qualified electrician.
The lamp does not operate. The lamp is defective. Replace the lamp.
Steam and condensation settle
on the food and in the cavity of
the oven.
You left the dish in the oven for
too long.
Do not leave the dishes in the
oven for longer than 15 - 20 mi-
nutes after the cooking process
ends.
Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the appliance cavity. Do not remove
the rating plate from the appliance cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
Installation
WARNING!
Refer to Safety chapters.
www.zanussi.com 13
Building In
3
6
589
594
114
16
21
548
573
min. 550
20
6
600
558
min. 560
min. 550
20
589
594
114
16
21
548
573
580
min. 560
558
9
Securing the appliance to the cabinet
A
B
Electrical installation
The manufacturer is not responsible
if you do not follow the safety
precautions from the Safety
chapters.
This appliance is supplied only with a main
cable.
Cable
Cable types applicable for installation or
replacement:
H07 RN-F, H05 RN-F, H05 RRF, H05 VV-F,
H05 V2V2-F (T90), H05 BB-F
For the section of the cable refer to the total
power on the rating plate. You can also refer to
the table:
Total power (W) Section of the ca-
ble (mm²)
maximum 1380 3 x 0.75
maximum 2300 3 x 1
maximum 3680 3 x 1.5
The earth cord (green / yellow cable) must be 2
cm longer than phase and neutral cables (blue
and brown cables).
14 www.zanussi.com
Technical data
Technical data
Voltage 230 V
Frequency 50 Hz
Energy efficiency
Product Fiche and information according to EU 65-66/2014
Supplier's name Zanussi
Model identification
ZOB10401BK
ZOB10401XK
Energy Efficiency Index 105.1
Energy efficiency class A
Energy consumption with a standard load, conventional mode 0.83 kWh/cycle
Number of cavities 1
Heat source Electricity
Volume 56 l
Type of oven Built-In Oven
Mass
ZOB10401BK 25.2 kg
ZOB10401XK 26.1 kg
EN 60350-1 - Household electric cooking
appliances - Part 1: Ranges, ovens, steam
ovens and grills - Methods for measuring
performance.
Energy saving
The appliance has features which help you save
energy during everyday cooking.
General hints
Make sure that the oven door is closed
properly when the appliance operates
and keep it closed as much as possible
during the cooking.
Use metal dishes to improve energy
saving.
When possible, put the food inside the
oven without heating it up.
When the cooking duration is longer
than 30 minutes, reduce the oven
temperature to minimum 3 - 10 minutes
before the end of the cooking time,
depending on the duration of the
cooking. The residual heat inside the
oven will continue to cook.
Use the residual heat to warm up other
dishes.
Keep food warm - if you want to use
residual heat to keep a meal warm, choose
the lowest possible temperature setting.
ENVIRONMENTAL CONCERNS
Recycle the materials with the symbol . Put
the packaging in applicable containers to
recycle it. Help protect the environment and
human health and to recycle waste of electrical
and electronic appliances. Do not dispose
www.zanussi.com 15
appliances marked with the symbol with the
household waste. Return the product to your
local recycling facility or contact your municipal
office.
16 www.zanussi.com
Indice
Informazioni di sicurezza 17
Istruzioni di sicurezza 18
Descrizione del prodotto 21
Preparazione al primo utilizzo 21
Utilizzo quotidiano 21
Utilizzo degli accessori
22
Funzioni aggiuntive
23
Consigli e suggerimenti utili 23
Pulizia e cura 27
Risoluzione dei problemi 29
Installazione 30
Dati tecnici 31
Efficienza energetica
32
Con riserva di modifiche.
Informazioni di sicurezza
Leggere attentamente le istruzioni fornite prima di installare e
utilizzare l'apparecchiatura. I produttori non sono responsabili di
eventuali lesioni o danni derivanti da un'installazione o un uso
scorretti. Conservare sempre le istruzioni in un luogo sicuro e
accessibile per poterle consultare in futuro.
Sicurezza dei bambini e delle persone vulnerabili
Questa apparecchiatura può essere usata da bambini a partire
dagli 8 anni e da adulti con limitate capacità fisiche, sensoriali o
mentali o con scarsa esperienza o conoscenza sull'uso
dell'apparecchiatura, solamente se sorvegliati o se istruiti
relativamente all'uso dell'apparecchiatura e se hanno compreso
i rischi coinvolti.
Non consentire ai bambini di giocare con l'apparecchio.
Tenere gli imballaggi lontano dai bambini e smaltirli in modo
adeguato.
Tenere i bambini e gli animali domestici lontano
dall'apparecchiatura durante il funzionamento o raffreddamento.
Le parti accessibili sono incandescenti.
Se l'apparecchiatura ha un dispositivo di sicurezza per i
bambini sarà opportuno attivarlo.
I bambini non devono eseguire interventi di pulizia e
manutenzione sull'apparecchiatura senza essere supervisionati.
I bambini di 3 anni e di età inferiore vanno tenuti alla larga
dall'apparecchiatura quando è in funzione, in ogni momento.
www.zanussi.com 17
Avvertenze di sicurezza generali
L'installazione dell'apparecchiatura e la sostituzione dei cavi
deve essere svolta unicamente da personale qualificato.
AVVERTENZA: L'apparecchiatura e le parti accessibili si
riscaldano molto durante l'uso. Abbiate cura di non toccare gli
elementi riscaldanti. Tenere lontani i bambini al di sotto dei 8
anni se non costantemente supervisionati.
Servirsi sempre degli appositi guanti da forno per estrarre o
inserire accessori o pentole resistenti al calore.
Prima di eseguire qualsiasi intervento di manutenzione,
scollegare l'apparecchiatura dalla rete elettrica.
Assicurarsi che l’apparecchiatura sia spenta prima di sostituire
la lampadina per evitare la possibilità di scosse elettriche.
Non usare una pulitrice a vapore per pulire l'apparecchiatura.
Non utilizzare detergenti abrasivi o raschietti di metallo per
pulire il vetro della porta per non rigare la superficie e causare
la rottura del vetro.
Se il cavo di alimentazione è danneggiato, deve essere
sostituito dal produttore, da un tecnico autorizzato o da una
persona qualificata per evitare situazioni di pericolo.
Istruzioni di sicurezza
Installazione
AVVERTENZA!
L’installazione dell'apparecchiatura
deve essere eseguita da personale
qualificato.
Rimuovere tutti i materiali di imballaggio.
Non installare o utilizzare l'apparecchiatura
se è danneggiata.
Attenersi alle istruzioni fornite insieme
all'apparecchiatura.
Prestare sempre attenzione in fase di
spostamento dell'apparecchiatura, dato che
è pesante. Usare sempre i guanti di
sicurezza e le calzature adeguate.
Non tirare l’apparecchiatura per la maniglia.
È necessario rispettare la distanza minima
dalle altre apparecchiature.
Assicurarsi che l'apparecchiatura sia
installata sotto e vicino a parti
adeguatamente ancorate a una struttura
fissa.
I lati dell'apparecchiatura devono restare
adiacenti ad apparecchiature o unità con la
stessa altezza.
L'apparecchiatura è dotata di un sistema
elettrico di raffreddamento. Questo deve
essere alimentato elettricamente.
Collegamento elettrico
AVVERTENZA!
Rischio di incendio e scossa
elettrica.
Tutti i collegamenti elettrici devono essere
realizzati da un elettricista qualificato.
L'apparecchiatura deve disporre di una
messa a terra.
Verificare che i dati elettrici riportati sulla
targhetta dei dati corrispondano a quelli
dell'impianto. In caso contrario, contattare un
elettricista.
18 www.zanussi.com
Utilizzare sempre una presa elettrica con
contatto di protezione correttamente
installata.
Non utilizzare prese multiple e prolunghe.
Accertarsi di non danneggiare la spina e il
cavo. Qualora il cavo elettrico debba essere
sostituito, l’intervento dovrà essere effettuato
dal nostro Centro di Assistenza autorizzato.
Evitare che i cavi entrino a contatto o si
trovino vicino alla porta dell'apparecchiatura,
in particolare quando la porta è calda.
I dispositivi di protezione da scosse
elettriche devono essere fissati in modo tale
da non poter essere disattivati senza l'uso di
attrezzi.
Inserire la spina di alimentazione nella presa
solo al termine dell'installazione. Verificare
che la spina di alimentazione rimanga
accessibile dopo l'installazione.
Nel caso in cui la spina di corrente sia
allentata, non collegarla alla presa.
Non tirare il cavo di alimentazione per
scollegare l’apparecchiatura. Tirare solo la
spina.
Servirsi unicamente di dispositivi di
isolamento adeguati: interruttori automatici,
fusibili (quelli a tappo devono essere rimossi
dal portafusibile), sganciatori per correnti di
guasto a terra e relé.
L'impianto elettrico deve essere dotato di un
dispositivo di isolamento che consenta di
scollegare l'apparecchiatura dalla presa di
corrente a tutti i poli. Il dispositivo di
isolamento deve avere una larghezza
dell'apertura di contatto non inferiore ai 3
mm.
Questa apparecchiatura è conforme alle
direttive CEE.
Utilizzo
AVVERTENZA!
Rischio di lesioni, ustioni, scosse
elettriche o esplosioni.
Questa apparecchiatura è stata prevista
unicamente per un uso domestico.
Non modificare le specifiche tecniche
dell'apparecchiatura.
Accertarsi che le fessure di ventilazione non
siano ostruite.
Non lasciare mai l'apparecchiatura
incustodita durante il funzionamento.
Spegnere l'apparecchiatura dopo ogni
utilizzo.
Prestare attenzione in fase di apertura della
porta dell'apparecchiatura quando
quest'ultima è in funzione. Può fuoriuscire
aria calda.
Non mettere in funzione l'apparecchiatura
con le mani umide o quando c'è un contatto
con l'acqua.
Non esercitare pressione sulla porta aperta.
Non utilizzare l'apparecchiatura come
superficie di lavoro o come piano di
appoggio.
Aprire la porta dell'apparecchiatura con
cautela. L'uso di ingredienti contenenti alcol
può causare una miscela di alcol e aria.
Evitare la presenza di scintille o fiamme
aperte vicino all'apparecchiatura quando si
apre la porta.
Non appoggiare o tenere liquidi o materiali
infiammabili, né oggetti facilmente
incendiabili sull'apparecchiatura, al suo
interno o nelle immediate vicinanze.
Non usare la funzione microonde per pre-
riscaldare il forno.
AVVERTENZA!
Vi è il rischio di danneggiare
l'apparecchiatura.
Per evitare danni o scolorimento dello
smalto:
Non mettere pentole resistenti al calore
o altri oggetti direttamente sulla
superficie inferiore dell'apparecchiatura.
Non appoggiare la pellicola di alluminio
direttamente sulla superficie inferiore
dell'apparecchiatura.
Non mettere direttamente acqua
all'interno dell'apparecchiatura calda.
Non tenere piatti umidi e cibo all'interno
dell'apparecchiatura dopo aver terminato
la fase di cottura.
Prestare attenzione quando si tolgono o
inseriscono gli accessori.
Lo scolorimento dello smalto non influisce
sulle prestazioni dell'apparecchiatura.
Per le torte molto umide, usare una leccarda.
I succhi di frutta provocano macchie che
possono essere permanenti.
L'apparecchiatura è destinata solo alla
cottura. Non deve essere utilizzata per altri
scopi, come per esempio il riscaldamento di
un ambiente.
La cottura deve sempre essere eseguita con
la porta del forno chiusa.
Se l'apparecchiatura si trova dietro a un
pannello anteriore (ad es. una porta),
www.zanussi.com 19
assicurarsi che questo non sia mai chiuso
quando l'apparecchiatura è in funzione.
Calore e umidità possono accumularsi sul
retro di un pannello chiuso causando danni
all'apparecchiatura, all'alloggiamento o al
pavimento. Non chiudere il pannello
dell'armadio finché l'apparecchiatura non si è
completamente raffreddata dopo l'uso.
Manutenzione e pulizia
AVVERTENZA!
Vi è il rischio di lesioni, incendio o
danni all'apparecchiatura.
Prima di eseguire qualunque intervento di
manutenzione, spegnere l'apparecchiatura
ed estrarre la spina dalla presa.
Controllare che l'apparecchiatura sia fredda.
Vi è il rischio che i pannelli in vetro si
rompano.
Sostituire immediatamente i pannelli in vetro
della porta nel caso in cui siano danneggiati.
Contattare il Centro di Assistenza
autorizzato.
Prestare attenzione quando si rimuove la
porta dall'apparecchio. La porta è pesante!
Pulire regolarmente l'apparecchiatura per
evitare il deterioramento dei materiali che
compongono la superficie.
Pulire l'apparecchiatura con un panno
inumidito e morbido. Utilizzare solo
detergenti neutri. Non usare prodotti
abrasivi, spugnette abrasive, solventi od
oggetti metallici.
Se si utilizza uno spray per il forno, seguire
attentamente le istruzioni di sicurezza sulla
confezione.
Non pulire lo smalto catalitico (ove presente)
con detergente di alcun tipo.
Luce interna
Le lampadine utilizzate in questa
apparecchiatura sono lampade speciali per
elettrodomestici. Non usarle per
l'illuminazione di casa.
AVVERTENZA!
Rischio di scosse elettriche.
Prima di sostituire la lampadina, scollegare
l’apparecchiatura dalla rete elettrica.
Servirsi unicamente di lampadine con le
stesse specifiche tecniche.
Smaltimento
AVVERTENZA!
Rischio di lesioni o soffocamento.
Staccare la spina dall'alimentazione elettrica.
Tagliare il cavo elettrico dell'apparecchiatura
e smaltirlo.
Togliere il blocco porta per evitare che
bambini o animali restino intrappolati
nell'apparecchiatura.
Assistenza Tecnica
Per riparare l'apparecchiatura contattare il
Centro di Assistenza Autorizzato.
Utilizzare esclusivamente ricambi originali.
20 www.zanussi.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36

Zanussi ZOB10401XK Manuale utente

Tipo
Manuale utente
Questo manuale è adatto anche per

in altre lingue