Hoover HOZP717IN Manuale utente

Marca: Hoover

Modello: HOZP717IN

Tipo: Manuale utente

Questo manuale è adatto anche per

HOZP717IN/E

PROPERTY OF

CL N° REV. DATE

SPECIFICATION

1/1

MODIFY DESCRIPTION

MODIFIED BY

BASE CODE

TREATMENT

MATERIAL

DATE SIGNATURE

DRAWN

CHECKED

FOR

WEIGHT SCALE

SIZE

NAME

(LOCAL LANGUAGE)

PART CODE

SHEET

REPLACE No ORIGIN CL No Class Specification

RELEASE LEVEL

WITHOUT OUR WRITTEN CONSENT IS FORBIDDEN

OF EU DIRECTIVE 2002/95/CE + AMENDMENTS

MATERIALS IN COMPLIANCE WITH REQUIREMENTS

------------

16-02-2018

USER MANUAL H HNFTF09

CL 00000

42825960

16-02-2018

C.FİDANCI

K.ÖZGÜR

Kullanım Kılavuzu H HNFTF09

HOOVER

GENERAL TOLERANCE

ISO 2768 - m

SC 000-000

PRODUCTION RELEASED

------------

USER INSTRUCTIONS

OVENS

NOTICE D'EMPLOI ET D'INSTALLATION

DES FOURS ENCASTRABLES

CANDY HOOVER GROUP S.R.L. • Via Privata Eden Fumagalli • 20047 Brugherio Milano Italy

MANUALE D’ISTRUZIONI

FORNO

INSTRUCCIONES DE USO

HORNOS EMPOTRABLES

BEDIENUNGSANLEITUNG

BACKOFEN

KULLANIM KILAVUZU

FIRINLAR

POKYNY PRO UŽIVATELE

TROUBY

• HOZP717IN

BEDIENUNGSANLEITUNG

BACKOFEN

RÚRA NA PEČENIE

NÁVOD NA POUŽITIE

110

Safety Indications

• WARNING: the appliance and accessible parts become hot during use.

Be careful not to touchanyhot parts.

•WARNING: the accessible parts can become hot when the oven is in

use. Children must be kept at a safe distance.

•WARNING: ensure that the appliance is switched off before replacing

the bulb,to avoid the possibility of electric shocks.

•WARNING: before initiating the automatic cleaning cycle:

- Clean the ovendoor;

- Removelarge or coarsefoodresidues from the inside of the oven using

a dampsponge. Do not use detergents;

- Remove allaccessories and the sliding rackkit (wherepresent);

- Do not place teatowels

• In ovens with meat probe it is necessary, before making the cleaning

cycle, close the hole with the nut provided. Always close the hole with

the nutwhen the meatprobeis not used.

•Children under 8 must be kept at a safe distance from the appliance if

not continuously supervised.

•Children must not play with the appliance. The appliance can be used

by those aged 8 or over and by those with limited physical, sensorial or

mental capacities, without experience or knowledge of the product,

only if supervised or provided with instruction as to the operation of the

appliance, in a safe way with awareness of the possible risks.

•Cleaning and maintenance should not be carried out by unsupervised

children.

•Do not use rough or abrasive materials or sharp metal scrapers to

clean the oven door glasses, as they can scratch the surface and cause

the glassto shatter.

•The oven must be switched off before removing the removable parts

and, after cleaning, reassemblethem according the instructions.

•Only usethe meat probe recommendedforthis oven.

•Do notuse a steam cleaner for cleaning operations.

• Connect a plug to the supply cable that is able to bear the voltage,

current and load indicated on the tag and having the earth contact. The

EN 02

socket must be suitable for the load indicated on the tag and must be

having the earth contact connected and in operation. The earth

conductor is yellow-green in colour. This operation should be carried

out by a suitably qualified professional. In case of incompatibility

between the socketand the appliance plug, ask a qualified electrician to

substitute the socket with another suitable type. The plug and the

socket must be conformed to the current norms of the installation

country. Connection to the power source can also be made by placing

an omnipolar breaker between the appliance and the power source

that can bear the maximum connected load and that is in line with

current legislation. The yellow-green earth cable should not be

interrupted by the breaker. The socket or omnipolar breaker used for

the connection should be easily accessible when the appliance is

installed.

•The disconnection may be achieved by having the plug accessible or by

incorporating a switch in the fixed wiring in accordance with the wiring

rules.

•If the power cable is damaged, it must be substituted with a cable or

special bundle available from the manufacturer or by contacting the

customer service department.

•The type of powercable mustbe H05V2V2-F.

•Failure to comply with the above can compromise the safety of the

appliance and invalidate the guarantee.

•Any excess of spilled material should be removedbefore cleaning.

•During the pyrolytic cleaning process, surfaces can heat up more than

usual, children musttherefore be kept ata safe distance.

•The appliance must not be installed behind a decorative door in order

toavoidoverheating.

•When you place the shelf inside, make sure that the stop is directed

upwards and in the back of the cavity.

The shelfmust beinserted completelyintothe cavity

• WARNING: Do not line the oven walls with aluminum foil or single-use

protection available from stores. Aluminum foil or any other protection,

in direct contact with the hot enamel, risk melting and deteriorating the

enamel ofthe insides.

• WARNING: Never removethe ovendoor seal.

EN 03

General Instructions

1.1 Safety indications

1.2 Electrical safety

1.3 Recommendations

1.4 Installation

1.5 Waste management

1.6 Conformity declaration

2.1 Overview

2.2 Accessories

2.3 First use

Product Description

3.1 Display description

3.2 Cooking modes

Use of the Oven

4.1 General notes on cleaning

4.2 Maintenance

• Removal and cleaning of grills

• Removal of the oven window

• Removal and cleaning of the glass

door

• Changing the bulb

Oven Cleaning and Maintenance

5.1 F.A.Q.

Troubleshooting

Summary

EN 04

1. General Instructions

We thank you for choosing one of our products. For the

best results with your oven, you should read this

manual carefully and retain it for future reference.

Before installing the oven, take note of the serial

number so that you can give it to customer service staff

if any repairs are required. Having removed the oven

from its packaging, check that it has not been damaged

during transportation. If you have doubts, do not use

the oven and refer to a qualified technician for advice.

Keep all of the packaging material (plastic bags,

polystyrene, nails) out of the reach of children. When

the oven is switched on for the first time, strong

smelling smoke can develop, which is caused by the glue on the insulation panels surrounding the oven

heating for the first time. This is absolutely normal and, if it occurs, you should wait for the smoke to

dissipate before putting food in the oven. The manufacturer accepts no responsibility in cases where

the instructions contained in this document are not observed.

NOTE: the oven functions, properties and accessories cited in this manual will vary, depending on the

model you havepurchased.

1.1 Safety Indications

Only use the oven for its intended purpose, that is only for the cooking of foods; any other use, for

example as a heat source, is considered improper and therefore dangerous. The manufacturer cannot

be held responsible foranydamageresultingfrom improper, incorrect orunreasonableusage.

The use of any electricalapplianceimplies the observance of somefundamentalrules:

- do not pullon the power cable to disconnect the plug from the socket;

- do not touchtheappliance with wet or damp handsor feet;

- in generalthe use of adaptors, multiple sockets and extension cables is not recommended;

- in case of malfunctionand/orpooroperation, switchoff the appliance anddo not tamper with it.

1.2 Electrical Safety

ENSURE THAT AN ELECTRICIAN OR QUALIFIED TECHNICIAN MAKES THE ELECTRICAL CONNECTIONS.

The power supply to which the oven is connected must conform with the laws in force in the country of

installation.The manufactureracceptsno responsibilityforany damagecausedby the failuretoobserve

these instructions. The oven must be connected to an electrical supply with an earthed wall outlet or a

disconnector with multiple poles, depending on the laws in force in the country of installation. The

electrical supply should be protected with suitable fuses and the cables used must have a transverse

section that can ensurecorrectsupplytothe oven.

CONNECTION

The oven is supplied with a power cable that should only be connected to an electrical supply with 220-

240 Vac 50 Hz power between the phases or between the phase and neutral. Before the oven is

connectedtotheelectricalsupply, it is important tocheck:

- power voltage indicatedonthe gauge;

- the setting of the disconnector.

The grounding wire connected to the oven's earth terminal must be connected to the earth terminal of

the power supply.

WARNING

Before connecting theovento the power supply, ask a qualified electrician tocheck the continuity of the

power supply's earth terminal. The manufacturer accepts no responsibility for any accidents or other

problems caused by failure to connect the ovento the earth terminal or by an earth connection that has

defective continuity.

EN 05

1.3 Recommendations

Aftereach use of theoven,aminimum of cleaning willhelp keeptheovenperfectly clean.

Do not line the ovenwalls with aluminium foilor single-use protection available fromstores. Aluminium

foil or any other protection, in direct contact with the hot enamel, risks melting and deteriorating the

enamel of the insides. In order to prevent excessive dirtying of your oven and the resulting strong

smokey smells, we recommend not using the oven at very high temperature. It is better to extend the

cooking time and lower the temperature a little. In addition to the accessories supplied with the oven,

weadvise you only use dishes andbaking moulds resistant toveryhightemperatures.

1.4 Installation

The manufacturers have no obligation to carry this out. If the assistance of the manufactureris required

to rectify faults arising from incorrect installation, this assistance is not covered by the guarantee. The

installation instructions for professionally qualified personnel must be followed. Incorrect installation

may cause harm or injury to people, animals or belongings. The manufacturer cannot be held

responsiblefor suchharm or injury.

The oven can be located high in a column or under a worktop. Before fixing, you must ensure good

ventilation in the oven space to allow proper circulation of the fresh air required for cooling and

protecting the internalparts.Make theopenings specified on lastpageaccording tothetype of fitting.

NOTE: as the oven could require maintenance work, it is advisable to keep another wall socket available

so that the oven can be connected to this if it is removed from the space in which it is installed. The

power cable must only be substituted by technical service staff or by technicians with equivalent

qualifications.

1.5 Waste management and environmental protection

This appliance is labelled in accordance with European Directive 2012/19/EU regarding

electric and electronic appliances (WEEE). The WEEE contain both polluting substances

(that can have a negative effect on the environment) and base elements (that can be

reused). It is important that the WEEE undergo specific treatments to correctly remove and

dispose of the pollutants and recover all the materials. Individuals can play an important

role in ensuring that the WEEE do not become an environmental problem; it is essential to

follow a fewbasicrules:

- the WEEE shouldnot be treatedasdomesticwaste;

- the WEEE should be taken to dedicated collection areas managed by the town council or a registered

company.

In many countries, domestic collections may be available for large WEEEs. When you buy a new

appliance, the old one can be returned to the vendor who must accept it free of charge as a one-off, as

long as the applianceis of an equivalent type and hasthe same functions as thepurchasedappliance.

SAVING AND RESPECTINGTHE ENVIRONMENT

Where possible, avoid pre-heating the oven and always try to fill it. Open the oven door as infrequently

as possible, because heat from the cavity disperses every time it is opened. For a significant energy

saving, switch off the oven between 5 and 10 minutes before the planned end of the cooking time, and

use the residual heat that the ovencontinues togenerate. Keep the seals clean and in order, to avoidany

heat dispersal outside of the cavity. If you have an electric contract with an hourly tariff, the "delayed

cooking" programme makes energy saving more simple, moving the cooking process to start at the

reducedtariff timeslot.

1.6 Declaration of compliance

The parts of this appliance that may come into contactwith foodstuffs comply with theprovisionsofEEC

Directive89/109.

By placing the mark on thisproduct,weareconfirmingcomplianceto all relevantEuropeansafety,

health and environmental requirementswhichareapplicableinlegislationforthisproduct.

EN 06

2. Product Description

2.1 Overview

1. Control panel

2. Shelf positions

(lateral wire grid if included)

3. Metal grill

4. Drip pan

5. Fan (behind the steel plate)

6. Oven door

2.2 Accessories (according to the model)

Drip pan

Collects the residues that drip duringthe cooking

of foodson the grills.

EN 07

Metal grill

Holds baking trays and plates.

Lateral wire grid ifincluded.

Lateral wire grids

Grill pan set

The simple shelfcantake moulds and dishes.

The tray holdershelf is especially good for grilling things.

Use it with the drip tray.

The special profile of the shelves means they stay

horizontal even when pulled right out. There is no risk of

a dish sliding or spilling.

The drip tray catches the juices from grilled foods. It is

only used with the Grill, Rotisserie, or Fan Assisted Grill ;

removeit from the oven forother cookingmethods.

Never use the drip tray as a roasting tray as this creates

smoke and fat will spatter your oven making it dirty.

The trayholder

The tray holder shelf is ideal for grilling. Use it in

conjunction with the drip tray. A handle is included to

assist in moving the both accessories safely. Do no leave

the handle inside the oven.

2.3 First Use

PRELIMINARYCLEANING

Clean the oven before using for the first time. Wipe over external surfaces with a damp soft cloth. Wash

all accessories and wipe inside the oven with a solution of hot water and washing up liquid. Set the

empty oven to the maximum temperature and leave on for about 1 hour, this will remove any lingering

smells of newness.

3. Use of the Oven

3.1 Display description

EN 08

Cooking

duration

Cooking

end

Timer

Clock

set

Child

lock

WiFi

ON / OFF

EXTRA

The oven is switched on and off with this button.

If the oven is switched off, the display shows the clock. When

the oven is inactive, all the functions are available except the

cookingduration andend of cooking.

If the clock is not set, the oven does not work: the display

flashes, showing "12:00" and the only functioning key is

Extra.From the Extra key, thefollowing functionscanbe set:

NB: can only be set with an

activecookingprogramme.

Press EXTRA twice and set

the time using the “+” and

“-” keys, confirming by

pressing"SELECT".

The display shows “00:00”

if no cooking duration has

been inserted, otherwise

the display shows the time

remaining.

When a cooking programme

terminates, the oven

switches off while the

display shows "END" (the

cooking programme icon

remains on) until the On/Off

button, the only functioning

key, is pressed. When a

cooking programme

terminates, an alarm will

sound.

When the cooking time has

finished, the oven

automatically switches off and

the alarm sounds for a few

seconds.

FUNCTION HOW TO DEACTIVATE WHAT IT DOES WHY IT IS NEEDED

END OF

COOKING

DURATION

SETTING

THE CLOCK

TIMER

HOW TO USE

NB: can only be set with an

activecookingprogramme.

Press EXTRA enough times

to illuminate the icon, set

the end of cooking time

using the “<” and “>” keys

and confirm by pressing

"SELECT".

Press EXTRA enough times

to illuminate the icon, set

the end of cooking time

using the “<” and “>” keys

and confirm by pressing

"SELECT".

The cooking duration is

automaticallycalculated.

•This function is also used for

cooking that can be scheduled

in advance.

•If a cooking programme is set,

it will be lost if the "F" key is

pressed.

•If delayed cooking is set, the

oven switches off and the

display shows the current time

while the cooking programme,

cooking duration and end of

cookingiconsareilluminated.

•If a cooking programme is set,

by pressing the “<” and “>”

keys you can see and modify

the temperature set: at the first

touch, the operating

temperature is shown while

another touch will allow you to

modify said temperature.

To modify the end of

cooking before the set

time, press EXTRA enough

times to illuminate the

icon, regulate the end of

cooking time as required

using the “<” and “>” keys

and confirm by pressing

"SELECT".

To cancel the end of

cooking time, reset the

displayto “00:00”.

When a cooking

programme terminates,

the oven switches off while

the display shows "END"

(the cooking programme

icon remains on) until the

On/Off button, the only

functioning key, is pressed.

When a cooking

programme terminates, an

alarm will sound.

•This function is useful

when there are children in

the house.

•Press the EXTRA key

enough times to illuminate

the icon and then either

the“<”or“>”keyto

activate this function: the

display will show ON; to

confirmpress SELECT.

•Press the EXTRA key

enough times to illuminate

the icon and then either

the“<”or“>”keyto

deactivate this function:

the display will show OFF;

toconfirmpressSELECT.

•If the function is active

only the "Extra" button, to

deactivate the function,

and "On/Off" button can

be used.

•The alarm functions

regardless of whether the

ovenis switchedon.

•Switched on for the first

time, the display

illuminates and shows

"12:00".

•To modify the time, press

EXTRA enough times to

illuminate the icon and use

the “<” and “>” keys to set

the time, confirming it by

pressingSELECT.

•It allows you to set the

time that appears on the

display.

•The display shows

“00:00” if no time has been

inserted or the time

remaining if this has

alreadybeen set.

Press EXTRA enough times

to illuminate the icon and

use the “<” and “>” keys to

set the time, confirming by

pressingSELECT.

•To modify the timer, press

EXTRA enough times to

illuminate the icon,

regulate the cooking time

as required using the “<”

and “>” keys and confirm

by pressing"SELECT".

•This function activates an

alarm that sounds for a few

seconds when the set time

expires (this function does

not switchthe oven off).

You can select a time

between00:00 and 23:59.

• The timer functions

regardless of whether the

ovenis switchedon.

•To modify cooking before

the set time, press EXTRA

twice and regulate the

cooking time as required

using the “<” and “>” keys,

before pressing "SELECT"

once more.

•To cancel the cooking

duration, reset the display

to“00:00”.

CHILD

SAFETY

EN 09

Pressing"Extra" on the timer display allowsyou to select the Wi-

Fi menu. In the Wi-Fi menu if you pressthe "< >"buttons youcan select:

- : Wi-Fi is off;the oven is not controllablevia the app.Off

- : Wi-fi is on and the oven is only controllable via the app. It means that it is not possible to select cookingOn

functions, recipes and temperature from the display. Only the Wi-Fi menu is available by pressing "Extra". You

can switch the oven off using the On/Off button, but you cannot switch it back on again via the display, it can

only be switchedon via the app.

-:Reset This setting should be used to enrol the oven the first time it connects to your Wi-Fi network and to

reset the current Wi-Fi connection to allow a new enrolment. Once selected, the appliance gives you 5

minutes to complete the enrolment process. During this process the cooking functions, recipes and

temperature setting are not accessible from the display. Only the Wi-Fi menu is available by pressing "Extra".

You can switch the oven off using the On/Off button, but you cannot switch it back on again via the display, it

can only be switched on via the app. To exit the enrolment/reset procedure via the display, press "Extra" and

then use "< >" buttons to select "Off". After five minutes, the appliance will exit the enrolment/reset

procedure automatically.

- : the oven sends its status to the app but it cannot be controlled remotely. The oven must be enrolledRead

before this is possible.

If Wi-Fi is not configuredit is only possible to choose between offand reset.

When the oven is connected to Wi-Fi, the defaultcooking time durationis 5 hours, but this can be modified by

the user.

Wi-Fi Enrolment:

To enroll the appliance for Wi-Fi, press "Extra" on the display until the Wi-Fi icon lights, then select "Reset" by

pressing "< >". The procedure on the app should then be followed. Once selected, the appliance gives you 5

minutesto completethe enrolment process.

Wi-Fi icon

- iconnot lit: Wi-Fiis off.

- Icon blinks 1 second on an 1 second off: the oven is accessible to your Wi-Fi network and ready to be enrolled.

If the enrolmenthas not been successful, the Wi-Fi icon will switchoff after 5 minutes.

- Iconis permanentlylit: the oven is connectedto your Wi-Fi router.

- The icon blinks3 seconds on and 1 second off: the ovenis trying to connect to yourWi-Fi router.

- The icon blinks1 second on and 3 seconds off: the oven is in readonly mode.

WiFi (depends on the oven model)

HOOVER :

For detailed information on HOW TO CONNECT your OneFi appliance and HOW

TO USE IT effectively, go to http://wizardservice.candy-hoover.com/

Grill

Oven box

Turnspit

Circular

heating element

Bottom heating element

Fan

Defost

Pyro

LANGUAGE SETTING The language can be set when

the oven is switched off by pressing the Extra and Select

buttonssimultaneously and for 3". The current language is

shown on the display and can be changed by pressing the

“<” or “>” keys, confirming it by pressing SELECT. Available

languagesare:Italian, English, French and German.

SELECT Any selection must be confirmed. If not

confirmed within 15 seconds, the selection is cancelled.

Bychanging menu, any unconfirmedselection is lost.

“HOT” ICON When a cooking programme finishes or when the oven switches off, if the oven is still

hot, the display showsthe currenttime alternatingwith the message“HOT” at3" intervals.

EN 10

T °C

default

180

210

200

210

T °C

range

40 ÷ 40

50 ÷ 240

50 ÷ 230

150 ÷ 220

50 ÷ 240

L1 ÷ L5

Function

Dial

Function (Depends on the oven model)

LAMP: Turns on the oven light.

GRILL: use the grill with the door closed.

The top heating element is used alone and you can adjust the temperature. Five

minutes preheating is required to get the elements red-hot. Success is guaranteed

forgrills, kebabs and gratin dishes. White meats should be put at a distance from the

grill; the cooking time is longer, but the meat will be tastier. You can put red meats

and fish fillets on the shelf with the drip tray underneath. The oven has two grill

positions:

Grill: 2140 W Barbecue: 3340 W

FAN ASSISTED GRILL : use the turbo-grill with the door closed.

The top heating element is used with the fan circulating the air inside the oven.

Preheating is necessary for red meats but not for white meats. Ideal for cooking

thick food items, whole pieces such as roast pork, poultry, etc. Place the food to be

grilled directly on the shelf centrally, at the middle level. Slide the drip tray under the

shelf to collect the juices. Make sure that the food is not too close to the grill. Turn

the food over halfwaythroughcooking.

FAN COOKING: We recommend you use this method for poultry, pastries, fish

and vegetables. Heat penetrates into the food better and both the cooking and

preheating times are reduced. You can cook different foods at the same time

with or without the same preparation in one or more positions. This cooking

method gives even heat distribution and the smells are not mixed.

Allow about ten minutes extrawhen cooking foods at the same time.

DEFROST: When the dial is set to this position. The fan circulates air at room

temperature around the frozen food so that it defrosts in a few minutes

without the proteincontentof the food being changed or altered.

*Tested in accordance with the CENELEC EN 60350-1 used for definition of energy class.

3.2 Cooking Modes

FAN + LOWER ELEMENT: The bottom heating element is used with the fan

circulatingthe air inside the oven.This method is ideal for juicy fruit flans, tarts,

quiches and pâté.

It prevents food from drying and encourages rising in cakes, bread dough and

other bottom-cooked food.

Place the shelf in the bottomposition.

EN 11

220 50 ÷ 280

CONVENTIONAL COOKING: Both top and bottom heating elements are used.

Preheat the oven for about ten minutes. This method is ideal for all traditional

roasting and baking. For seizing red meats, roast beef, leg of lamb, game,bread,

foilwrapped food (papillotes), flaky pastry. Place the food and its dish on a shelf

in mid position.

BOTTOM: Using the lower element. Ideal for cooking all pastry based dishes.

Use this for flans, quiches, tarts, pate and any cooking that needs more heat

frombelow.

210 50 ÷ 230

EN 12

4. Oven cleaning and maintenance

4.1 General notes on cleaning

The lifecycle of the appliance can be extended throughregularcleaning. Wait for the oven to cool before

carrying out manual cleaning operations. Never use abrasive detergents, steel wool or sharp objects for

cleaning, so as to not irreparably damage the enamelled parts. Use only water, soap or bleach-based

detergents (ammonia).

GLASS PARTS

It is advisable to clean the glass window with absorbent kitchen towel after every use of the oven. To

remove more obstinate stains, you can use a detergent-soaked sponge, well wrung out, and then rinse

with water.

OVENWINDOW SEAL

If dirty, the seal can be cleaned with a slightlydamp sponge.

ACCESSORIES

Clean accessories with a wet, soapy sponge before rinsing and drying them: avoid using abrasive

detergents.

DRIP PAN

After using the grill, remove the pan from the oven.Pour the hot fat into a container and wash the pan in

hot water, using a spongeand washing-upliquid.

If greasy residues remain, immerse the pan in water and detergent. Alternatively, you can wash the pan

in the dishwasher or use acommercialoven detergent. Neverput adirty panback intothe oven.

REMOVAL AND CLEANINGOF THE SIDE RACKS

1. Unscrew the bolt in ananti-clockwisedirection.

2. Removethe side racks bypulling themtowards you.

3. Clean the sideracks in a dishwasher or with a wet sponge and thendry them immediately.

4. Having cleaned the side racks, put them back in and reinsert the bolts, ensuring that they are fully

tightened.

4.2 Maintenance

REMOVAL OF THE OVENWINDOW

1. Open the front window.

2. Open the clamps of the hinge housing on the right and left side of the front window by pushing them

downwards.

3. Replacethe window by carrying out theprocedure inreverse.

LOW-E

REMOVAL AND CLEANINGOF THE GLASS DOOR

1. Open the ovendoor.

2.3.4. Lock the hinges,removethe screwsand remove theupper metal coverby pullingit upwards.

5.6. Remove the glass, carefully extracting it from the oven door (NB: in pyrolytic ovens, also remove

the second and third glass (if present)).

7. Atthe end of cleaning or substitution,reassemble the parts in reverse order.

On all glass, the indication "Pyro" must be legible and positioned on the left side of the door, close to the

left-handlateralhinge. Inthis way, the printedlabel ofthe firstglass will be inside the door.

EN 13

CHANGING THE BULB

1. Disconnect the oven from the mains supply.

2. Undo the glasscover, unscrewthe bulb and replaceit with anew bulb of the same type.

3. Once the defective bulb is replaced, replace the glass cover.

5. Troubleshooting

5.1 FAQ

PROBLEM POSSIBLE CAUSE SOLUTION

The oven does not heat up

The clock is not set Set the clock

The child lock is on

A cooking function and

temperature has not been set

Deactivate the child lock

Ensure that the necessary

settings are correct

The oven does not heat up

EN 14

Steam and condensation on

the user interface panel

Clean with a microfiber

cloth the user interface

panel to remove the

condensation layer

No reaction of the touch

user interface

• AVERTISSEMENT: L'appareil et les parties accessibles deviennent

chauds pendant l'utilisation. Des précautions doivent être prises pour

éviterde toucherles éléments chauffants.

• ATTENTION : les parties accessibles peuvent devenir très chaudes

quand le four est en marche. Les enfants doivent être tenus à une

distance de sécurité.

• Cet appareil n'est pas destiné à être utilisé par des personnes (y

compris les enfants) dont les capacités physiques, sensorielles ou

mentales sont réduites, ou ayant un manque d'expérience et de

connaissances, à moins qu'elles n'aient été formées à l'utilisation de

l'appareil,par une personneresponsable de leur sécurité.

• Les enfants ne doiventjouer avec l'appareil.

• Le nettoyage et l'entretien par l'utilisateur ne doit pas être fait par des

enfants sans surveillance.

• En cours d'utilisation l'appareil devient chaud. Des précautions

doivent être prises pour éviter de toucher les éléments chauds à

l'intérieur du four.

AVERTISSEMENT: Les parties accessibles peuvent devenir chaudes

pendantl'utilisation.Les jeunes enfants doivent êtretenus à l'écart.

• Ne pas utiliser de nettoyants abrasifs ou de racloirs métalliques

tranchantspour nettoyer la vitre de la porte du fourcar ils peuvent rayer

la surface, entrainant des risques d'explosion.

•Le four doit être éteint avant d'enlever la protection et après le

nettoyage, la protectiondoit être replacé en respectant les instructions.

• Utiliser seulement la sonde de température recommandée pour ce

four.

• Ne pas utiliser de nettoyants vapeur pourle nettoyage.

• Brancher le câble d’alimentation sur une prise de courant qui

supporte le voltage ; le courant et la charge sont indiqués sur l’étiquette

; vérifier la présence d’une mise à la terre. La prise d’alimentation doit

supporter la charge indiquée sur l’étiquette et être dotée d’une mise à

la terre en état de fonctionnement. Le conducteur de mise à la terre est

jaune et vert. Cette opération doit être exécutée par du personnel

FR 15

Conseils De Securite

qualifié. En cas d’incompatibilité entre la prise d’alimentation et la fiche

du câble de l’appareil, demander à un électricien professionnel de

remplacer la prise d’alimentation par un dispositif compatible. La fiche

du câble d’alimentation et la prise d’alimentation doivent être

conformes aux normes en vigueur dans le pays d’installation. Il est

possible de brancher l’appareil à la prise d’alimentation en installant un

disjoncteur multipolaire qui supporte la charge électrique maximale,

conformément aux lois en vigueur, entre l’appareil et la prise

d’alimentation. Le conducteur jaune et vert de mise à la terrene doit pas

être bloqué par le disjoncteur. La prise d’alimentation ou le disjoncteur

multipolaire utilisé pour le branchement doit rester à tout moment

accessible lors de l’installation de l’appareil.

•Le débranchement doit se faire en accédant à la prise d’alimentation

ou en prévoyant un interrupteur sur le circuit électrique fixe, conforme

aux normes électriques.

•Si le câble d’alimentation est endommagé, il doit être remplacé par un

câble ou un faisceau de câbles spécial disponible auprès du fabriquant

ou encontactantle service après-vente.

•Le câbled’alimentation requisest le H05V2V2-F.

•Le non-respectdes consignes ci-dessus peut compromettre lasécurité

de l’appareilet annuler la garantie.

•Tout produitdéversé enquantitédoit êtreéliminé avant le nettoyage.

•Pendant le nettoyage à pyrolyse, les surfaces peuvent devenir

beaucoup plus chaude que d’habitude, les enfants doivent donc être

tenusà une distance de sécurité.

•Ne pas installer l’appareil derrière une porte décorative, pour éviter la

surchauffe.

•En introduisant le plateau dans le four, s’assurer que le stop est dirigé

vers le haut et au fondde la cavité.

Le plateau doit complètement êtreinsérédans la cavité

• AVERTISSEMENT : Ne tapissez pas les parois du four avec du papier

aluminium ou un autre matériau de protection jetable en vente dans le

commerce. Tout papier aluminium ou autre matériau de protection qui

entrerait au contact direct de l'émail chaud risquerait de fondre et de

détériorer l'émail intérieur du four.

• AVERTISSEMENT : Ne retirez jamais le joint de la porte du four.

FR 16

Instructions Générales

1.1 Indications de sécurité

1.2 Sécurité électrique

1.3 Recommandations

1.4 Installation

1.5 La gestion des déchets et la

protection de l'environnement

1.6 Déclaration de conformité

2.1 Vue d'ensemble

2.2 Accessoires

2.3 Première utilisation

Description du produit

3.1 Description de l'affichage

3.2 Mode de cuisson

Utilisation du Four

4.1 Remarques générales concernant

le nettoyage

4.2 Nettoyage à la vapeur

4.3 Entretien

• Retrait et nettoyage des grilles

• Retrait de la porte du four

• Retrait et nettoyage des vitres

• Remplacement de l'ampoule

Nettoyage du four et

maintenance

5.1 F.A.Q.

Dépannage

SOMMAIRE

FR 17

1. Instructions générales

Nous vous remercions d'avoir choisi un de nos produits.

Pourobtenir les meilleursrésultats avec votrefour, vous

devezlire attentivement ce manuel et le conserver pour

toute consultation ultérieure. Avant d'installer le four,

notez le numéro de série, il vous sera demandé par le

support technique si des réparations sont nécessaires.

Après avoir enlevé le four de son emballage, vérifiez

qu'il n'a pas été endommagé pendant le transport. Si

vous avez des doutes, ne pas utiliser le four et se référer

à un technicien qualifié pour obtenir des conseils.

Conservez tous les matériaux d'emballage (sacs en

plastique, polystyrène, clous) hors de la portée des

enfants.Lors de la première utilisation du four, il peut se produire un dégagement de fumée âcre

provoqué par le premier échauffement de la colle des panneaux d’isolation enveloppant le four. Ce

phénomène est normal. Attendez que la fumée cesse avant de cuire des aliments. Le fabricant décline

toute responsabilité dans les cas où les instructions contenues dans le présent document ne sont pas

respectées.

REMARQUE: les fonctions du four, les propriétés et les accessoires cités dans ce manuel peuvent varier

selon les modèles.

1.1 Indications de sécurité

Utilisez uniquement le fourà sa destination,qui est seulement pour la cuisson des aliments; toute autre

utilisation, par exemple comme une source de chaleur, est considérée comme impropre et donc

dangereuse.Le fabricant ne peut être tenu responsable de toutdommage lié à une mauvaise utilisation

ou a des modifications techniquesdu produit.

L'utilisationde toutappareil électrique implique lerespectde certainesrègles fondamentales:

- Ne pas tirersur le filélectrique pour débrancher la prise.

- Ne pas toucherl'appareil avecles mainsou les pieds mouillésou humides;

- En général l'utilisationd'adaptateurs, de prises multiples etde rallongesest déconseillé;

- En cas de dysfonctionnement et / ou de mauvais fonctionnement, éteindre l'appareil et ne pas y

toucher.

1.2 Sécurité électrique

LE BRANCHEMENT ELECTRIQUE DOIT ÊTRE REALISE PAR UN INSTALLATEUR AGREE OU UN

TECHNICIENDE E.QUALIFICATION SIMILAIR

L'alimentation électrique à laquelle le four est connecté doit être conforme aux lois en vigueur dans le

pays d'installation. Le fabricant décline toute responsabilité pour tout dommage causé par le non

respect de ces instructions. Le four doit être raccordé à l'alimentation électrique avec une prise murale

reliée à la terre ou par l'intermédiaire d'un dispositif à coupure omnipolaire, selon les lois en vigueur

dans le pays d'installation. L'alimentationélectrique doit être protégéepar des fusibles appropriés et les

câblesutilisés doiventavoir une section transversale qui peut assurerune alimentation normale dufour.

CONNEXION

Le four est livré avec un câble d’alimentation permettant le raccordement sous une tension électrique

de 230 V entre les phases ou entre phase et neutre. Le raccordement devra être effectué après avoir

vérifié:

- La tension d'alimentationindiquée surle compteur;

- Le réglage du disjoncteur.

Le fil de protection du cordon (vert/jaune) relié à la Borne Terre de l’appareil doit être relié à la Borne

Terrede l’installation.

FR 18

1.3 Recommandations

Après chaque utilisation du four, réaliser un petit entretien qui favorisera le nettoyage parfait du four.

Ne pas tapisser les parois du four avec des feuilles en aluminium ou des protections jetables du

commerce. La feuille d'aluminium ou toute autre protection, en contact direct avec l'émail chauffé,

risque de fondre et de détériorer l'émail du moufle. Avant installation de l'appareil, il faut relever le

numérode sérieet le noter ci-dessous en cas d'éventuelle demande d'intervention.

Afin d'éviter les salissures excessives de votre four ainsi que les fortes odeurs de fumée pouvant en

résulter, nous recommandons de ne pas utiliserle fourà tropforte température.Il est préférable de

rallonger le temps de cuisson et de baisser la température. Nous vous conseillons de n'utiliser que des

plats,des moules à pâtisserierésistantsà de très hautes températures.

1.4 Installation

La mise en service de l’appareil est à la charge de l’acheteur, le constructeur est dégagé de ce service.

Les pannes liées à une mauvaise installation ne seront pas couvertes par la garantie. Une mauvaise

installation peut provoquer des dommages aux personnes, aux animaux domestiques; dans ce cas la

responsabilité du constructeur ne peut être engagée. L'installation du four doit être réalisée par un

installateur agréé ou un technicien de qualification similaire. Le four peut être placé en hauteur dans

une colonne ou enchâssé sous un plan de travail. Avant sa fixation: il est indispensable d'assurer une

bonne aération dans la niche d'encastrement afin de permettre la bonne circulation de l'air frais

nécessaire au refroidissement et à la protection des organes intérieurs. Pour cela, réaliser les

ouverturesspécifiées selon letype d'encastrement (dernièrepage).

ATTENTION

Faire vérifier la continuité de la terre de l’installation avant de procéder au raccordement. Le fabricant

décline toute responsabilité en cas d'accidents ou d'autres problèmes qui pourraient survenir à l'usage

d'un appareilnon relié à la terre, ou relié à uneterre dont la continuitéserait défectueuse.

REMARQUE: Le four peut nécessiter une opération de S.A.V. Aussi, placez la prise de courant de façon à

pouvoir brancher le four une fois sorti de sa niche. Câble d'alimentation: si le changement du câble

d'alimentation s'avère nécessaire, nous vous demandons de faire réaliser cette opération par le service

après-vente ou unepersonnede qualification similaire.

1.5 La gestion des déchets et la protection de l'environnement

Le présent appareil est marqué conformément à la directive 2012/19/UE relative aux

déchets d'équipements électriques et électroniques

(DEEE). Les DEEE contiennent à la fois des substances polluantes (qui peuvent avoir des

conséquences négatives sur l'environnement) et des éléments de base (réutilisables). Il est

important de soumettre les DEEE à des traitements spécifiques, en vue d'extraire et

d'éliminer de façon appropriée toutes les substances polluantes, puis de récupérer et

recyclertous les matériaux.

Chacun peut jouer un rôle important quant à la protection de l'environnement contre les DEEE. Pour

atteindre cet objectif, il est impératifde suivre quelques règles élémentaires:

• Les DEEE nedoiventpas être traitéscommedes déchets ménagers.

• Ils doivent être remis aux points de collecte appropriés gérés par la municipalité ou par des sociétés

immatriculées.Dans plusieurspays,il estpossible de collecter à domicile lesDEEE volumineux.

• Lorsque vous achetez un nouvel appareil, vous devez retourner l'ancien au vendeur qui le récupère

gratuitement, au cas par cas, à condition que l'équipement soit de type équivalent et possède les

mêmes fonctionsque celuifourni.

FR 19

La pagina sta caricando ...

Hoover HOZP717IN Manuale utente

Marca: Hoover

Modello: HOZP717IN

Tipo: Manuale utente

Questo manuale è adatto anche per

HOZP717IN/E

Scarica il pdf

rapporto

Hoover HOZP717IN Manuale utente

Questo manuale è adatto anche per

Hoover HOZP717IN Manuale utente

Documenti correlati

Altri documenti