Moog Videolarm AMS180CT Installation And Operation Instructions Manual

Marca: Moog Videolarm

Modello: AMS180CT

Categoria: Accessori per telecamere di sicurezza

Tipo: Installation And Operation Instructions Manual

Questo manuale è adatto anche per

www.videolarm.com

A M S 9 0 C T & A M S 1 8 0 C T

Vandal-Resistant Housings

Installation and Operation Instructions for the following models:

AMS90CT Vandal-Resistant indoor 14-gauge Steel housing, corner mount, with security

access lock plus WindowGuard™ Paint Shield (s) -3 clear and 2 tinted, for a

xed camera; MCL 8” (Includes mounting hardware)

AMS180CT Vandal-Resistant indoor 14-gauge Steel housing, wall mount, with security

access lock plus WindowGuard™ Paint Shield (s) -3 clear and 2 tinted, for

a xed camera; MCL 8” (Includes mounting hardware)

Before attempting to connect or operate this product, please read these instructions completely.

81-IN5190

12-21-2011

IMPORTANT SAFEGUARDS SAFETY PRECAUTIONS

UNPACKING

SERVICE

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with damp cloth.

7 Do not block any of the ventilation openings. Install in accordance with the

manufacturers instructions.

8 Cable Runs- All cable runs must be within permissible distance.

9 Mounting - This unit must be properly and securely mounted to a supporting

structure capable of sustaining the weight of the unit.

Accordingly:

a. The installation should be made by a qualied installer.

b. The installation should be in compliance with local codes.

c. Care should be exercised to select suitable hardware to install the unit, taking into

account both the composition of the mounting surface and the weight of the unit.

10 Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus ( including ampliers) that produce heat.

11 Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding type

plug has two blades and a third grounding prong. The wide blade or the third

prong are provided for your safety. When the provided plug does not t into your

outlet, consult an electrician for replacement of the obsolete outlet.

12 Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

13 Only use attachment/ accessories specied by the manufacturer.

14 Use only with a cart, stand, tripod, bracket, or table specied by the manufacturer,

or sold with the apparatus. When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

15 Unplug this apparatus during lighting storms or when unused for long periods of time.

16 Refer all servicing to qualied service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled of objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or

has been dropped.

Be sure to periodically examine the unit and the supporting structure to make sure that the integrity

of the installation is intact. Failure to comply with the foregoing could result in the unit separating

from the support structure and falling, with resultant damages or injury to anyone or anything struck

by the falling unit.

Unpack carefully. Electronic components can be

damaged if improperly handled or dropped. If an item

appears to have been damaged in shipment, replace

it properly in its carton and notify the shipper.

Be sure to save:

1 The shipping carton and packaging material.

They are the safest material in which to make future

shipments of the equipment.

2 These Installation and Operating Instructions.

If technical support or service is needed, contact us at

the following number:

The lightning ash with an arrowhead symbol,

within an equilateral triangle, is intended to

alert the user to the presence of non-insulated

“dangerous voltage” within the product’s

enclosure that may be of sufcient magnitude

to constitute a risk to persons.

Este símbolo se piensa para alertar al usuario a la presencia

del “voltaje peligroso no-aisIado” dentro del recinto de los

productos que puede ser un riesgo de choque eléctrico.

Ce symbole est prévu pour alerter I’utilisateur à la presence

“de la tension dangereuse” non-isolée dans la clôture de

produits qui peut être un risque de choc électrique.

Dieses Symbol soll den Benutzer zum Vorhandensein der

nicht-lsolier “Gefährdungsspannung” innerhalb der

Produkteinschließung alarmieren die eine Gefahr des

elektrischen Schlages sein kann.

Este símbolo é pretendido alertar o usuário à presença “di

tensão perigosa non-isolada” dentro do cerco dos produtos

que pode ser um risco de choque elétrico.

Questo simbolo è inteso per avvertire I’utente alla presenza

“di tensione pericolosa” non-isolata all’interno della

recinzione dei prodotti che può essere un rischio di scossa

elettrica

The exclamation point within an equilateral

triangle is intended to alert the user to

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

Este símbolo del punto del exclamation se piensa para

alertar al usuario a la presencia de instrucciones importantes

en la literatura que acompaña la aplicación.

Ce symbole de point d’exclamation est prévu pour alerter

l’utilisateur à la presence des instructions importantes dans

la littérature accompagnant l’appareil.

Dieses Ausruf Punktsymbol soll den Benutzer zum

Vorhandensein de wichtigen Anweisungen in der Literatur

alarmieren, die das Gerät begleitet.

Este símbolo do ponto do exclamation é pretendido alertar o

usuário à presença de instruções importantes na literatura

que acompanha o dispositivo.

Questo simbolo del punto del exclamaton è inteso per

avvertire l’utente alla presenza delle istruzioni importanti nella

letteratura che accompagna l'apparecchio.

TECHNICAL SUPPORT

AVAILABLE 24 HOURS

1- 800 - 554 -1124

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER ( OR BACK). NO USER- SERVICE-

ABLE PARTS INSIDE. REFER SEVICING

TO QUALIFIED SERVICE PERSONNEL.

Limited Warranty for Moog Videolarm Products

Moog Videolarm warrants these products to be free from defects in material or workmanship as follows:

PRODUCT CATEGORY PARTS \ LABOR

All Enclosures and Electronics* Five (5) Years

Poles/PolEvators™/CamEvator Three (3) Years

Warrior Series™/Q-View™/IR Illuminators Five (5) Years

SView Series™ Five (5) Years **6 months if used in auto scan/tour operation

Controllers Five (5) Years

Power Supplies Five (5) Years

EcoKit Three (3) Years

Accessory Brackets Five (5) Years

Liberty Dome Three (3) Years

*DeputyDome™, NiteTrac™, Igloo Dome, PurgeDome™ Three (3) Years **6 months if used in auto scan/tour operation

During the labor warranty period, to repair the Product, Purchaser will either return the defective product, freight prepaid, or deliver it to Moog Videolarm

Inc. Decatur GA. The Product to be repaired is to be returned in either its original carton or a similar package affording an equal degree of protection with

a RMA # (Return Materials Authorization number) displayed on the outer box or packing slip. To obtain a RMA# you must contact our Technical Support

Team at 800.554.1124, extension 101. Moog Videolarm will return the repaired Product freight prepaid to Purchaser. Moog Videolarm is not obligated to

provide Purchaser with a substitute unit during the warranty period or at any time. After the applicable warranty period, Purchaser must pay all labor and/or

parts charges.

The limited warranty stated in these product instructions is subject to all of the following terms and conditions.

TERMS AND CONDITIONS

1. NOTIFICATION OF CLAIMS: WARRANTY SERVICE: If Purchaser believes that the Product is defective in material or workmanship, then written notice with an

explanation of the claim shall be given promptly by Purchaser to Moog Videolarm. All claims for warranty service must be made within the warranty period.

If after investigation Moog Videolarm determines the reported problem was not covered by the warranty, Purchaser shall pay Moog Videolarm for the cost of

investigating the problem at its then prevailing per incident billable rate. No repair or replacement of any Product or part thereof shall extend the warranty period

of the entire Product. The speci c warranty on the repaired part only shall be in effect for a period of ninety (90) days following the repair or replacement of that

part or the remaining period of the Product parts warranty, whichever is greater.

2. EXCLUSIVE REMEDY: ACCEPTANCE: Purchaser’s exclusive remedy and Moog Videolarm’s sole obligation is to supply (or pay for) all labor necessary to repair any

Product found to be defective within the warranty period and to supply, at no extra charge, new or rebuilt replacements for defective parts.

3. EXCEPTIONS TO LIMITED WARRANTY: Moog Videolarm shall have no liability or obligation to Purchaser with respect to any Product requiring service during the

warranty period which is subjected to any of the following: abuse, improper use, negligence, accident, lightning damage or other acts of God (i.e., hurricanes,

earthquakes), modi cation, failure of the end-user to follow the directions outlined in the product instructions, failure of the end-user to follow the maintenance

procedures recommended by the International Security Industry Organization, written in product instructions, or recommended in the service manual for the

Product. Furthermore, Moog Videolarm shall have no liability where a schedule is speci ed for regular replacement or maintenance or cleaning of certain parts

(based on usage) and the end-user has failed to follow such schedule; attempted repair by non-quali ed personnel; operation of the Product outside of the

published environmental and electrical parameters, or if such Product’s original identi cation (trademark, serial number) markings have been defaced, altered,

or removed. Moog Videolarm excludes from warranty coverage Products sold AS IS and/or WITH ALL FAULTS and excludes used Products which have not

been sold by Moog Videolarm to the Purchaser. All software and accompanying documentation furnished with, or as part of the Product is furnished “AS IS”

(i.e., without any warranty of any kind), except where expressly provided otherwise in any documentation or license agreement furnished with the Product. Any

cost associated with removal of defective product and installation of replacement product is not included in this warranty.

4. PROOF OF PURCHASE: The Purchaser’s dated bill of sale must be retained as evidence of the date of purchase and to establish warranty eligibility.

DISCLAIMER OF WARRANTY

EXCEPT FOR THE FOREGOING WARRANTIES, Moog Videolarm HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING, BUT NOT LIMITED TO ANY AND/OR ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND/OR

ANY WARRANTY WITH REGARD TO ANY CLAIM OF INFRINGEMENT THAT MAY BE PROVIDED IN SECTION 2-312(3) OF THE UNIFORM COMMERCIAL

CODE AND/OR IN ANY OTHER COMPARABLE STATE STATUTE. Moog Videolarm HEREBY DISCLAIMS ANY REPRESENTATIONS OR WARRANTY THAT

THE PRODUCT IS COMPATIBLE WITH ANY COMBINATION OF NON-Moog Videolarm PRODUCTS OR NON-Moog Videolarm RECOMMENDED PRODUCTS

PURCHASER MAY CHOOSE TO CONNECT TO THE PRODUCT.

LIMITATION OF LIABILITY

THE LIABILITY OF Moog Videolarm, IF ANY, AND PURCHASER’S SOLE AND EXCLUSIVE REMEDY FOR DAMAGES FOR ANY CLAIM OF ANY KIND

WHATSOEVER, REGARDLESS OF THE LEGAL THEORY AND WHETHER ARISING IN TORT OR CONTRACT, SHALL NOT BE GREATER THAN THE ACTUAL

PURCHASE PRICE OF THE PRODUCT WITH RESPECT TO WHICH SUCH CLAIM IS MADE. IN NO EVENT SHALL Moog Videolarm BE LIABLE TO PURCHASER

FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION,

REIMBURSEMENT OR DAMAGES ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS OR FOR ANY OTHER REASON WHATSOEVER.

AMS90

Note: DO NOT EXPOSE ENCLOSURE TO RAIN OR MOISTURE

Clase 2 Solamente

24VAC.

Herramientas: Destornillador de Philips, 7/16” llave

Nota: NO EXPONGA EL RECINTO A LA LLUVIA O A LA HUMEDAD

Classe 2 Seulement

24VCA.

Outils : Tournevis de Philips, 7/16” clé

Note : N'EXPOSEZ PAS LA CLÔTURE À LA PLUIE OU À L'HUMIDITÉ

Kategorie 2 Nur

24VAC

Werkzeuge: Philips Schraubenzieher, 7/16” Schlüssel

Anmerkung: SETZEN SIE EINSCHLIESSUNG NICHT REGEN ODER

FEUCHTIGKEIT AUS

Classe 2 Somente

24VAC.

Ferramentas: Chave de fenda de Philips, 7/16” de chave

Nota: NÃO EXPONHA O CERCO À CHUVA OU À UMIDADE

Codice categoria 2 Soltanto

24VCA.

Attrezzi: Cacciavite di Philips, 7/16” di chiave

Nota: NON ESPONGA LA RECINZIONE A PIOGGIA O AD UMIDITÀ

Electrical Specifications

Class 2 Only

24VAC

Tools: Philips Screwdriver, 7/16” wrench

Français

Deutsch

Italiano

Portuguese

Español

English

Content of Box

Open the lid of the unit with the barrel lock key.

NOTE: Key is removable only when the lid is locked.

• Abra la tapa de la unidad con la llave de cerradura del barril. NOTA:

La llave es desprendible solamente cuando la tapa es bloqueada.

• Ouvrez le couvercle de l'unité avec la clé de verrouillage de baril.

NOTE : La clef est démontable seulement quand le couvercle est

verrouillé.

• Öffnen Sie die Kappe der Maßeinheit mit der Faßsperrtaste.

ANMERKUNG: Schlüssel ist entfernbar, nur wenn die Kappe verschlos-

sen ist.

• Abra a tampa da unidade com a chave de fechamento do tambor.

NOTA: A chave é removível somente quando a tampa é locked.

• Apra il coperchio dell'unità con la chiave di catenaccio del barilotto.

NOTA: La chiave è smontabile soltanto quando il coperchio è locked.

To access the inside of the unit during mounting and

adjusting, the lid can be temporarily propped open

by using a screw driver or similar object.

• Tener acceso al interior de la unidad durante el montaje y el ajuste,

la tapa puede estar abierta temporalmente apoyado usando un

destornillador o un objeto similar.

• Pour accéder à l'intérieur de l'unité pendant le support et

l'ajustement, le couvercle peut être ouvert temporairement étayé en

employant un tournevis ou un objet semblable.

• Um das Innere der Maßeinheit während der Montage und der

Justage zugänglich zu machen, kann die Kappe propped geöffnetes

sein vorübergehend indem sie einen Schraubenzieher oder einen

ähnlichen Gegenstand verwendet.

• Para alcançar o interior da unidade durante a montagem e o ajuste,

a tampa pode estar aberta temporariamente sustentado usando

uma chave de fenda ou um objeto similar.

• Accedere alla parte interna dell'unità durante il montaggio e la

registrazione, il coperchio può essere aperto temporaneamente

propped usando un cacciavite o un oggetto simile.

Position the unit in the desired location and

mark the spots for the four mounting holes.

• Coloque la unidad en la localización deseada y marque

los puntos para los cuatro agujeros de montaje.

• Placez l'unité dans l'endroit désiré et marquez les taches

pour les quatre trous de support.

• Bringen Sie die Maßeinheit in der gewünschten Position in

Position und kennzeichnen Sie die Punkte für die vier

Entlüftungslöcher.

• Posicione a unidade na posição desejada e marque os

pontos para os quatro furos de montagem.

• Posizioni l'unità nella posizione voluta e contrassegni i punti

per i quattro fori di montaggio.

Pass electrical and video cables through the

access hole on the back of the unit, then secure

the unit in place with appropriate hardware.

• Pase eléctrico y los cables video a través del agujero de acceso en

la parte posteriora de la unidad, entonces aseguran la unidad en

lugar con hardware apropiado.

• Passez élém. élect. et les câbles visuels par l'ouverture d'accès sur le

dos de l'unité, fixent alors l'unité en place avec le matériel approprié.

• Führen Sie elektrisches und videokabel durch das Zugangsloch auf

der Rückseite der Maßeinheit, sichern dann die Maßeinheit im Platz

mit passenden Kleinteilen.

• Passe elétrico e os cabos video através do furo de acesso na parte

traseira da unidade, fixam então a unidade no lugar com ferragem

apropriada.

• Passi elettrico ed i video cavi attraverso il foro di accesso sulla parte

posteriore dell'unità, allora assicurano l'unità sul posto con fissaggi

adatti.

Complete electrical and video connections for

the camera, then attach the camera to the

camera bracket.

• Termine las conexiones eléctricas y video para la cámara

fotográfica antes de unir la cámara fotográfica al soporte de

la cámara fotográfica.

• Accomplissez les raccordements électriques et visuels pour

l'appareil-photo avant d'attacher l'appareil-photo à la

parenthèse d'appareil-photo.

• Vor der Befestigung der Kamera zum Kamerahaltewinkel

führen Sie die elektrischen und videoanschlüsse für die

Kamera durch.

• Termine conexões elétricas e video para a câmera antes de

unir a câmera ao suporte da câmera.

• Completi i collegamenti elettrici e video per la macchina

fotografica prima del fissaggio della macchina fotografica

alla staffa della macchina fotografica.

Attach camera, using the hardware pro-

vided in the packet, assemble as shown.

• Una la cámara fotográfica, usando el hardware proporcio-

nado en el paquete, monte según lo demostrado.

• Attachez l'appareil-photo, à l'aide du matériel fourni dans le

paquet, réunissez comme montré.

• Bringen Sie Kamera mit den Kleinteilen, die im Paket bereit-

gestellt werden an, bauen Sie, wie gezeigt zusammen.

• Una a câmera, usando a ferragem fornecida no pacote,

monte-a como mostrado.

• Fissi la macchina fotografica, per mezzo dei fissaggi forniti nel

pacchetto, monti come indicato.

Hex bolt

Lock washer

Flat washer

Bracket

O-ring

To achieve the desired camera position, adjust the hex bolt

and slotted screw with proper tools. The (3) directions shown

are the positions the camera and bracket can be maneuvered.

• Para alcanzar la posición deseada de la cámara fotográfica, ajuste el perno de la

tuerca hexagonal y el tornillo ranurado con las herramientas apropiadas. (3) las

direcciones demostradas son las posiciones la cámara fotográfica y el soporte

puede ser maniobrado.

• Pour réaliser la position désirée d'appareil-photo, ajustez le boulon de sortilège et la

vis encochée avec les outils appropriés. (3) les directions montrées sont les positions

l'appareil-photo et la parenthèse peut être manoeuvrée.

• Um die gewünschte Kameraposition zu erzielen, justieren Sie den Hexagonschraub-

bolzen und die gekerbte Schraube mit korrekten Werkzeugen. Die (3) gezeigten

Richtungen sind die Positionen die Kamera und Haltewinkel kann manövriert

werden.

• Para conseguir a posição desejada da câmera, ajuste o parafuso do hex e o

parafuso entalhado com ferramentas apropriadas. (3) os sentidos mostrados são as

posições a câmera e o suporte pode ser manobrado.

• Per realizzare la posizione voluta della macchina fotografica, registri il bullone del

hex e la vite scanalata con gli attrezzi adeguati. (3) i sensi indicati sono le posizioni la

macchina fotografica e la staffa può essere manovrata.

After tightening all fasteners, close and lock

the lid to complete the installation.

• Después de apretar todos los sujetadores, el cierre y

traba la tapa para terminar la instalación.

• Après serrage de toutes les attaches, la fin et ferment le

couvercle pour accomplir l'installation.

• Nach dem Festziehen aller Befestiger, verriegeln Ende

und die Kappe, um die Installation durchzuführen.

• Após ter apertado todos os prendedores, o fim e trava

a tampa para terminar a instalação.

• Dopo il fissaggio de tutti i fermi, la fine e blocca il

coperchio per completare l'installazione.

Lock and

remove key

5 6

To restore the clarity of the viewing window in the event of vandalism involving spray paint or other view-blocking

agents, remove the damaged shield and replace it with one of the extra shields provided.

• Para restaurar la claridad de la ventana de visión en el acontecimiento del vandalismo que implica la pintura de aerosol u otros

agentes de vista-bloqueo, quitar el protector dañado y substituirlo por uno de los protectores adicionales proporcionados.

• Reconstituer la clarté de la fenêtre de visionnement en cas du vandalisme impliquant la peinture de jet ou d'autres agents

deblocage, enlever le bouclier endommagé et le remplacer avec un des boucliers supplémentaires a fourni.

• Die Klarheit des Betrachtung Fensters im Falle des Vandalismus wieder herzustellen Sprayfarbe oder andere Ansicht-blockierende

Mittel mit einbeziehend, das beschädigte Schild zu entfernen und es mit einem der Extraschilder zu ersetzen stellte zur Verfügung.

• Para restaurar a claridade da janela de visão no evento do vandalism que envolve a pintura de pulverizador ou outros agentes

deobstrução, para remover o protetor danificado e para substitui-lo com um dos protetores extra fornecidos.

• Ristabilire la chiarezza della finestra di visualizzazione in caso di vandalismo che coinvolge la vernice di spruzzo o altri agenti

vista-ostruenti, rimuovere lo schermo danneggiato e sostituirlo con uno degli schermi supplementari ha fornito.

NOTE : For

convenience,

the extra window

shields may be

stored in the unit

Window shield

Viewing window

Star washer

and hex nut

(6 each)

General Dimensions/ Mounting Hole & Cable Access Hole Location Diagrams

AMS90 / AMS180

8.50"

215.9mm

8.25"

209.6mm

3.25"

82.6mm

2.38"

60.3mm

2.23"

56.7mm

3.30"

83.7mm

5.50"

139.7mm

1.50"

38.1mm

2.50"

63.5mm

.88"*

22.2mm*

Knockout

Hole (2)

.63"*

15.9mm*

Open Hole (1)

.25"*

6.4mm*

Mounting Hole (4)

* INDICATES DIAMETER

OF HOLE

OR KNOCKOUT

AMS90

8.25"

209.6mm

.88"*

22.2mm*

Knockout

Hole (1)

.63"*

15.9mm*

Open Hole (1)

.25"*

6.4mm*

Mounting Hole (4)

5.50"

139.7mm

3.25"

82.6mm

1.50"

38.1mm

2.50"

63.5mm

3.00"

76.2mm

2.00"

50.8mm

8.50"

215.9mm

AMS180

* INDICATES DIAMETER

OF HOLE

OR KNOCKOUT

(FOR REFERENCE USE ONLY AS ACTUAL DIMENSIONS MAY VARY SLIGHTLY FROM UNIT TO UNIT)

AMS90/ AMS180

Replacement Parts List

noitpircseDrebmuNtraP

1 RPAMS8010 AMS180 WALL MOUNT HOUSING

2 RPAMS8020 NMS90/ 180 CAMERA BRACKET KIT

3 RCAMS90/180 REPLACEMENT WINDOW FOR THE AMS90/ 180

4 RPAMS8040 BARREL LOCK KIT (key not shown)

5 RPAMS9050 AMS90 WALL MNT HOUSING

N/S RP27SHNMS PROTECTIVE WINDOW SHIELDS

NMS

Product Registration/Warranty

Thank you for choosing Moog Videolarm. We value your patronage and are solely committed to providing you with the highest

quality products available and superior customer service.

Should a problem arise, rest assure that Moog Videolarm stands behind its products by offering impressive warranty plans: 3 Years on all Housings, Poles,

Power Supplies, and Accessories and 5 Years on camera systems (SView, QView, Warriors), and InfraRed Illuminators.

Take a few moments and validate your purchase via the Online Product Registration Form at

www.videolarm.com/productregistration.jsp

• Simple and Trouble-Free RMA process

• Added into customer database to receive product updates / news

• Eliminate the need to archive original purchase documents:

Receipts, Purchase Orders, etc…