EN
5
English
device to power supply.
- Disconnect the device
from power supply and
empty the water tank
after you finish ironing.
- This appliance releases
steam and might cause
burns. Do not direct
steam towards animals
or people. Do not iron
clothing while wearing.
INSTRUCTIONS FOR USE
- Remove all the packaging before
using the device for the first time.
- Upon the first use, a small amount
of smoke and smell might be
generated. They will very quickly
disappear. As for steaming function,
when using it for the first time, do
not try it out on fabric, there might
be some dirt in the steam chamber
that can stain your clothing.
- Disconnect the device from power
supply before filling or emptying the
water tank.
- Fill the water tank up to the MAX
mark.
- Connect the device to power
supply and make sure the tank is
closed properly.
- The flashing indicator blinks to tell
the device is heating up. Once the
indicator stops blinking, the
device is ready to use.
- Place the piece of clothing you
want to iron on a hanger. Never iron
clothing while wearing.
- Press Steam release button and
hold the garment with your hand
while making vertical movements
along the clothing.
-Press the Continuous Steam
Release Button if you do not want to
have to constantly press the Steam
Release button while ironing.
FILLING THE TANK
-This device can use clean tap water
whose hardness is higher than 17
dh. Use of distilled or de-mineralized
water may prolong service life of
the device.
-Water tank capacity is
approximately 280 ml; it is easy
to control since the tank itself is
transparent.
- The types of water mentioned
below cannot be used with this iron
due to organic residues or mineral
elements it may contain, which in
turn might cause splashes, yellowish
color or drastically shorten service
life of the device.
- Do not use water from dryers,
scented or soft water, refrigerator,
battery or air conditioning water,
distilled water or rainwater.
CLEANING AND STORAGE
- Make sure that the appliance is
disconnected from the power supply
before cleaning.
- Allow the appliance to cool down
before cleaning it.
- Do not use abrasive detergents
or products that could damage the
appliance. Simply clean the surface
with a wet cloth.
- Do not immerse the appliance in
water or any other liquid.
- Store the device in a dry place after
it cools down.
TECHNICAL DATA
220-240V ~ 50Hz/60Hz 1500W
This product complies with
the directives 2014/35 / EU
EMC, 2014/30 / EU LVD,
2011 /65 / EU ROHS
PRODUCT RECYCLING –
ENVIROMENT
Do not throw this product in
the trash at the end of its
useful life. Take it to a waste
collection point, designated
for this purpose (subject to
the 2012/19 / EU DEEE directive).