Paoli Avvitatori STORM A.08.0005 Operating And Maintenance Manual

Marca: Paoli Avvitatori

Modello: STORM A.08.0005

Categoria: Avvitatori a batteria

Tipo: Operating And Maintenance Manual

STORM

OPERATING AND MAINTENANCE MANUAL

Grazie per aver scelto un prodotto PAOLI.

Dietro il vostro prodotto ci sono

la capacità e l’impegno di un team aziendale

che lavora tutti i giorni per essere in grado di offrirvi sempre

dei prodotti potenti, affidabili e durevoli nel tempo.

Dalle Pit Lanes a ogni tipo di attività,

il vostro successo è il nostro obiettivo!

Thanks for choosing a PAOLI product.

Behind your product you have

the capacity and the diligence of a company team

which is working all the days to be able to offer you always

powerful, reliable and long lasting products.

From the Pit Lanes to any businesses,

your success is our goal!

General Power Tool Safety Warnings

Read all safety warnings and all instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or serious injury. Save all

warnings and instructions for future reference! The term "power tool" in the

warnings refers to your mains-operated (corded) power tool or battery-operated

(cordless) power tool.

1. Work area safety

a. Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b. Do not operate power tools in explosive atmospheres, such as in the

presence of flammable liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

c. Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

2. Electrical safety

a. Power tool plugs must match the outlet. Never modify the plug in any

way. Do not use any adapter plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk of electric shock.

b. Avoid body contact with earthed or grounded surfaces, such as pipes,

radiators, ranges and refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

c. Do not expose power tools to rain or wet conditions. Water entering a

power tool will increase the risk of electric shock.

d. Do not abuse the cord. Never use the cord for carrying, pulling or

unplugging the power tool. Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords increase the risk of electric

shock.

e. When operating a power tool outdoors, use an extension cord suitable

for outdoor use. Use of a cord suitable for outdoor use reduces the risk of

electric shock.

f. If operating a power tool in a damp location is unavoidable, use a

residual current device (RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

g Hold power tool by insulated gripping surfaces, when performing an

operation where the fastener may contact hidden wiring or its own cord.

Fasteners contacting a "live" wire may make exposed metal parts of the power

tool "live" and could give the operator an electric shock.

3. Personal safety

a. Stay alert, watch what you are doing and use common sense when

operating a power tool. Do not use a power tool while you are tired or

under the influence of drugs, alcohol or medication. A moment of

inattention while operating power tools may result in serious personal injury.

b. Use personal protective equipment. Always wear eye protection.

Protective equipment such as dust mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate conditions will reduce personal

injuries.

c. Prevent unintentional starting. Ensure the switch is in the off-position

before connecting to power source and/or battery pack, picking up or

carry

ing the tool. Carrying power tools with your finger on the switch or

energi

zing power tools that have the switch on invites accidents.

△

WARNING

d. Remove any adjusting key or wrench before turning the power tool on.

wrench or a key left attached to a rotating part of the power tool may resul

t in

personal i

njury

Do not

overreach. Keep proper footing and balance at all times.

This

enables better control of the power tool in unexpected situations.

Dress properly. Do not wear loose clothing or jewelers. Keep your hair

clothing and gloves away

from moving parts. Loose clothes, je

welers or

long hair can be caught in moving parts.

If devices are provided for the connection of dust extraction and

collection facilities, ensure these are connected and properl

y used.

Use

of dust collection can reduce dust related hazards.

4. Power tool use and care

Do not force the power tool. Use the correct power tool for your

application.

The correct power tool will do the

job better and safer at the rate

for which it was designed.

Do not use the power tool if the switch does not turn it on and off. Any

power tool that cannot be control

led wi

th the switch is dangerous and must be

repaired.

c. Disconnect the plug from the power source and/or the battery

ck from

the power tool before making an

y adjustments

, changing accessories, or

storing power tools. Such preventive safety measures reduce the risk of

arting the power tool accidentally

Store idle power tools out of the reach of children and do not allow

persons unfamiliar with the power tool or these instructions to operate

the power tool. Power tools are dangerous in the hands of untrained users.

Maintain power tools. Check for misalignment or binding of moving

parts, breakage of parts and an

y other condition that may af

fect the

power tool’s operation. If damaged, have the power tool repaired before

use.

Many accidents are caused by poorly maintained power tool

Keep cutting tools sharp and clean.

Properly maintained cutting tools with

sharp cutting edges are less likel

y to

bind and are easier to control.

Use th

e power tool, accessories and t

ool bits etc. in accordance with

these instructions, taking into account the working conditions and the

work to be performed. Use of the power tool for operations different from

those intended coul

d result in a hazardous si

tuation.

5. Battery tool use and care

Recharge onl

y with the charger specified by the manufacturer.

A charger

that is suitable for one type of battery pack may create a risk of fire when used

with another battery pack.

Use power tools only

with specifically designated battery packs.

Use of

any ot

her battery packs may create a risk of injury and fire.

When battery pack is not in use, keep it away

from other metal objects,

like paper clips, coins, keys, nails, screws or other small metal objects

that can make a connection from one terminal to another. Shorting the

battery terminals together may cause burns or a fire.

Under abusive conditions, liquid ma

y be ejected from the batter

avoid

contact. If contact acciden

tally

occurs, flush with water. If liquid

contacts ey

es, additionally seek medical help.

Liquid ejected from the

battery m

y cause irritation or burns.

6. Service

Have your power tool serviced by a qualified repair person using only

identical replacement parts. This will ensure that the safety

of the power

tool is maintained.

Product Safety Instructions

1. To ensure the designed operational integrity of power tools, do not remove

installed cover or screws.

2. Use your tool at lower input than specified on the nameplate, otherwise, the

finish may be spoiled and working efficiency reduced by motor overload.

3. Do not wipe plastic parts with solvent. Solvents such as gasoline, thinner,

benzene, carbon tetrachloride, alcohol, ammonia and oil containing chloric

annex may damage and crack plastic parts. Do not wipe them with such solvent.

Wipe plastic parts with a soft cloth lightly dampened with soap water.

4. Use clamps or other practical way to secure and support the work piece to a

stable platform. Holding the work by hand or against your body is unstable and

may lead to a loss of control.

5. Use only accessories that are recommended by the manufacturer for your

model. Accessories that may be suitable for one tool may create a risk of injury

when used on another tool.

Important Safety Instructions For Charger & Battery Pack

1. Caution：To reduce risk of injury, charge only specific type rechargeable battery

packs. Other types of battery packs may burst causing personal injury and

damage.

2. Before using charger, read all instructions and cautionary markings on battery

packs and chargers.

3. Do not expose charger to rain or snow.

4. To reduce the risk of damage to electric plug and cord, pull by plug rather than

cord when disconnecting charger.

5. Use of an attachment not recommended or sold by the charger manufacture

may result in a risk of fire, electric shock, or injury to persons.

6. Make sure cord is located so that it will not be stepped on, tripped on, tripped

over, or otherwise subjected damage or stress.

7. Do not operate charger with damaged cord or plug. Replace them immediately.

8. Do not operate charger if it has received a sharp blow, been dropped, or

otherwise damage in any way, take it to qualified center.

9. To reduce risk of electric shock, unplug charger from outlet before attempting

any maintenance or cleaning. Turning off controls will not reduce this risk.

10. Do not disassemble charger or battery pack, take it to a qualified service center

while repair is required. Incorrect reassembling may result in a risk of electric

shock or fire.

△

WARNING

△

WARNING

Additional Safety Rules For Charger & Battery Pack

1. Do not charge battery pack when temperature is below 0°C (32°F) or above 40

°C (104°

F).

Do not attempt to use a set-up transformer, an engi

ne generator or DC power

recept

acl

Do not allow anything to cover or clog the charger vent

Always cover the battery pack terminals with the battery pack cover when the

battery p

ck: is not used.

Do not short the battery pa

ck.

Do not touch the terminals

with any conductive material.

Avoid storing battery pack in a container with other metal objects

such as nails,

coins, etc.

8. Do not expose battery pack to water or rain, A battery pa

ck short can use

large current flow

, overheating, possi

ble burns and even a breakdown.

Do not store the machine and battery pack in location

s where the temperature

may reach or exceed 50°C (122°F)

10.

Do not incinerate the battery pack even if it is severely damaged or

completel

y worn out. The battery pa

ck can explode in a fire.

11.

Be careful not drop, shake or strike battery pa

ck.

12.

Do not charge inside a box or container of any kind. The battery p

ack must be

placed in a well ventilated area during charging.

13.

Do not leave batteries unused for extended period of ti

me. Recharge the

battery every 3~6 months and bri

ng Li-Ion battery to 40~80% charge level

before storage.

14.

Li-Ion batteries are sensitive to high temperature and should

be kept in a cool,

dry and out of di

rect light exposure. Ideal temperature for operati

on and

storage is below 25°C (77°F).

15.

For extension of the battery lifetime, the lithium-i

on battery is designed with the

protection function to stop the output.

In the case of described below

, when using this product, even if you are pulli

the switch, the motor may stop.

This is not malfunction but the result of protection function.



When the battery power remaining runs out, the motor stop

 If the tool is overloaded, the motor may stop.

In this case, release the switch of tool

and elimi

nate causes of overloading.

ter that you can use it agai



If the battery is overheated under ov

erload work, the battery power may

stop. In this case stop using the battery and l

et the battery cool. Af

ter that

you can use it again.

16. This product is designed with low voltage protection, which prevents

the tool

from over dischargi

ng and prolongs battery's lifesp

an.

△

WARNING

Specific Safety Rules and/or Symbols

--------Recycle ------Class II Tool

--------Do Not Throw In Garbage V--------Volts

Hz-------Hertz

smargoliK-------gk

.c.d ----Direct Current

a.c.------Alternating Current

W--------Watts

mm------Millimeter

ft-lb-----Foot-Pound

r.p.m.----Revolutions or

Reciprocations Per Minute

Specifications

Model No.

A.08.0005

V81 egatloV d.c.

No-Load Speed 0~2100 r.p.m.

Max. Torque

350 N.m / 260 ft-lb

Tool Weight 1.02 kg

Battery Weight 0.65 kg

Capacity 1/2”(13mm)

Impacts Per Minute 3100

Torque Control -

Vibration

8.67 m/s²

Noise

102.2 dB

Charging Time

*The charging time may vary from the battery life and room temperature.

Charger

Battery Pack

B.50.0002

20V

3.0Ah

80 min

4.0Ah 100 min

Minutes Auto Cut-Off Charging Time (approximately)

View the Major Components

Anvil

LED

Main Switch

Battery Knob

Forward/Reverse Rod

Belt

Battery Pack

Fuel Gauge

Operating Instructions (Slide-In)

Installing or Removing Battery Pack

1. Always switch off the machine before insertion or removal of the battery pack.

2. To remove the battery pack, push the button on the battery pack and pull

the

tool unit from the battery p

ack in the di

rection.

To insert the battery pack, align the tool unit slides with the battery pack slid

ing

groove and push the tool

unit into pl

ace.

The tool unit can be slide into battery pack in two directions.

4. Do not force the battery pack in sliding it into tool unit. If the battery pa

ck does

not sli

de in easily, it is not being inserted correctly.

Charging the Battery Pack

1. Connect the plug to the charger before charging.

2. Plug the fast charger into the power source.

3. Slide the battery pack into the char

ger as the arrow direction shown on the

charger.

Push the battery pa

ck into place and make sure the red light on the charger is

“ON”. The battery pack is now starting the charging cycle.

5. After finishing the charging cycle, the light will turn into green. The battery pa

is now ready for use.

Your new battery pack is not charged. Y

ou need to charge it before use.

If you try to charge a battery pack

from a just-operated machine, sometimes

the charging light will not come on. If this occurs, let the battery pack cool for a

while then re-insert it and try to charge again.

When you charge a new battery pack or a battery pack wh

ich has not been

used for a long period, i

t may not accept a full charge.

This is a normal

condition and does not indicate a problem.

You can recharge the battery pa

fully after discharging it completely a couple of times.

9. Unplug the charger from the power source af

ter finishing the charge.

10.

Please remove the battery from the unplugged char

ger for storage.

The LED Light on the Charger

Power On (Green light flashes slowly)

Battery Low (Red light stays illuminated)

Battery charged 80% (Green light flashes rapidly)

Battery charged 100% (Green light stays illuminated)

Battery Pack temperature is too hot or too cold (Red light flashes slowly)

Battery Pack malfunction (Red and Green lights stay illuminated)

Battery Pack LED Indication Function

The Battery Pack has a “SW” button and 4-step green LEDs for indicating

remaining capacity status. The fuel gauge green LED will indicate

when the “SW”

button is momentarily pressed.

WARNING

1. Charger is plugged into a 100-240V a.c outlet only.

2. If the battery pack is too hot

or too cold, the charger will no

t fast charge the

battery pack and the red Indica

tor light is “blinking”. When th

e battery pack

temperature returns to between 0℃(32℉) and 50℃(122℉), the charger will

automatically begin charging.

3. If

both red and green indicator lights are “ON” the battery pack either does

not

comply or is defecti

ve. Please contact your retai

ler.

4. Do not charge the battery pack in the rain, snow or high temperature

environment.

5. Do not charge battery pack w

hen environment temperature is belo

w 0℃

(32℉)or above 40℃(104℉)

6. While

charging the cool battery pack (below 0℃) in the warm indoor, keep

the

battery pack in the room for one hour to warm up before starting the battery

pack.

7. Remove the plug after

finishi

ng the charge.

8. The charger shoul

d be cooled at least one hour after charging t

hree times

continuously.

9. Do not use generator for charging the battery pack.

Remaining Capacity LED Indication RC Status

LED 1 (green) 0%- 25%

LED 1, 2 (green) 26%-50%

LED 1, 2, 3 (green) 51%-75%

LED 1, 2, 3, 4 (green) 76%-100%

Installing or Removing Socket (Impact Wrench)

Always be sure that the machine is switched off and the battery pack is removed

before installing or removing the socket.

Caution

1. To install the socket, push the socket into the driving spindle as far as it will go.

(See Fig.4)

2. To remove the socket, simply pull the socket from the driving spindle.

3. To start the machine, simply pull the main switch. Machine speed is increase by

increasing pressure on the main switch. Release the main switch to stop.

4. For reversing the machine, (See Fig.5) use the forward / reverse rod on the

drive unit.

The directions of the rotation are also shown on the face of the bar.

5. Always check the direction of rotation before operation.

6. Use the forward / reverse rod only after the machine come to a complete stop.

Changing the direction of rotation before the machine stops may damage the

machine.

7. Hold the machine firmly and place the point of driver socket in the nut.

Apply forward pressure to the machine to the extent that the socket will not slip

off the nut and turn the machine on to start operation.

 Use the proper socket for the nut that you wish to use.

 Hold the machine pointed straight at the nut. If you tighten the nut for a time

longer than it needs, the nut or the point of the driver socket may be

overstressed, stripped, damaged, etc. Before starting your job, always

perform a test operation to determine the proper tightening time for your

screw. When tightening a standard nut in a steel plate, the proper tightening

torque can be obtained in an extremely short time (approx. 0.1-0.2 seconds).

 Turn the machine off as soon as the impact sound is heard. When tightening

nut M6 or smaller, carefully adjust pressure on the main switch so that the nut

is not damaged.

8. The tightening torque is affected by a wide variety of factors including the

following. After tightening always check the torque with a torque wrench.

Fig.4

Fig.5

 When the battery pack is discharged almost completely, voltage will drop

and the tightening torque will be reduced.

 Driver bit or socket bit:

Failure to use the correct size driver bit or socket bit will cause a reduction

the

tightening

torque.

●For driving a bolt:

Even though the torque coefficient and the class of bolt are the same, the

proper

tightening torque will differ according to the diameter of the bolt.

9. Even the diameter of the bolt are same, the proper tightening torque will dif

fer

according

to the torque coefficient, the

class of the bolt and the bolt length.

. The manner of holding the machine or the material of driving position to

tightened will affect the torque.

LED illustration

After machine is activated; LED will be on by release trigger and stay illuminated

for 10 seconds then off automatically.

Installing Or Removing Hook (optional)

1. Installing Hook：

Use Phillips or slotted bit size bit and tighten in clockwise.

2. Removing Hook：

Use Phillips or slotted bit size bit to loosen the hook.

NO. PARTS NAME Q

1 FRONT COVER SCREW 4

2 FRONT COVER ASS'Y 1

3 RUBBER WASHER 1

4 WASHER 1

5 FRONT IMPACT ASS'Y 1

6 REAR IMPACT ASS'Y 1

7 BEARING 1

8 WASHER 1

9 RING GEAR 1

10 RING GEAR FIXITY 1

11 O-RING 1

12 MOTOR ASS'Y 1

12-1 STATOR ASS'Y 1

12-2 ROTOR ASS'Y 1

13 PCB ASS'Y AND 1

13-1 LED ASS'Y 1

13-2

BATTERY CONNECTOR 1

14 MAIN SWITCH ASS'Y 1

14-1 TRIGGER 1

14-2 MAIN SWITCH 1

15 LED HOLDER 1

16 FORWARD/REVERSE ROD 1

17 HOUSING LABEL 1

18 FUEL GAGUE COVER 1

19 SCREW 2

20 HOUSING-L&R 1

21 HOUSING SCREW 9

23 HOOK(OPTIONAL) 1

24 HOOK SCREW(OPTIONAL) 1

25 BELT 1

BATTERY PACK 1

29 CHARGER 1

32 POWER CORD 1

14-1

14-2

13-1

13-2

12-2

12-1

NO. PARTS NAME Q

EC DECLARATION OF CONFORMITY

Individual machine

DINO PAOLI S.R.L. - Via G. Dorso, 5 - 42124 Reggio Nell’Emilia (Re) - Italy

declare under our sole responsibility that the product:

Machine Type

STORM

Cordless impact wrench

TECHNICAL DATA

View Operating and Maintenance Manual at page 5

SERIAL NO.

View back cover

to which this declaration relates, is in conformity with the requirements

of the Machinery Directive 2006/42/EC and EMC Directive 2004/108/EC

Name and address of the person authorized to draw up the technical file

Nome: Dr. Federico Galloni

Address: DINO PAOLI S.R.L. - Via G. Dorso, 5 - 42124 Reggio Nell’Emilia (Re) - Italy

Name and position of issuer:

Il Direttore / Managing Director Dr. Federico Galloni

Reggio nell’Emilia (RE) - Italy - November 23, 2016

STORM - Release 01/2019

DINO PAOLI s.r.l.

Via G. Dorso, 5 - 42124 Reggio nell’Emilia (RE) - Italy

Phone +39 0522 364 511 - Fax +39 0522 304 864

sales@paoli.net - www.paoli.net

Paoli Avvitatori STORM A.08.0005 Operating And Maintenance Manual

Marca: Paoli Avvitatori

Modello: STORM A.08.0005

Categoria: Avvitatori a batteria

Tipo: Operating And Maintenance Manual

Scarica il pdf

rapporto

in altre lingue

English: Paoli Avvitatori STORM A.08.0005

Paoli Avvitatori STORM A.08.0005 Operating And Maintenance Manual

Paoli Avvitatori STORM A.08.0005 Operating And Maintenance Manual

in altre lingue

Altri documenti