Aeg-Electrolux F55002VI0P Manuale utente

FAVORIT 55002 VI

EN

DISHWASHER USER MANUAL 2

IT

LAVASTOVIGLIE ISTRUZIONI PER L’USO 23

PL

ZMYWARKA INSTRUKCJA OBSŁUGI

45

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have

created it to give you impeccable performance for many

years, with innovative technologies that help make life

simpler – features you might not find on ordinary

appliances. Please spend a few minutes reading to get

the very best from it.

ACCESSORIES AND CONSUMABLES

In the AEG webshop, you’ll find everything you need to

keep all your AEG appliances looking spotless and

working perfectly. Along with a wide range of

accessories designed and built to the high quality

standards you would expect, from specialist cookware

to cutlery baskets, from bottle holders to delicate

laundry bags…

Visit the webshop at:

www.aeg-electrolux.com/shop

2

CONTENTS

4 Safety information

7 Product description

8 Control panel

10 Use of the appliance

11 Setting the water softener

12 Use of dishwasher salt

13 Use of detergent and rinse aid

14 Multitab function

14 Loading cutlery and dishes

15 Washing programmes

16 Select and start a washing

programme

18 Care and cleaning

19 What to do if…

21 Technical data

22 Environment concerns

The following symbols are used in this

user manual:

Important information concerning

your personal safety and information

on how to avoid damaging the

appliance.

General information and tips

Environmental information

Subject to change without notice

Contents

3

SAFETY INFORMATION

Before the installation and use, read this manual carefully:

• For your safety and the safety of your property.

• To help the environment.

• For the correct operation of the appliance.

Always keep these instructions with the appliance also if you move or give it to a differ-

ent person.

The manufacturer is not responsible if an incorrect installation and use causes damage.

Children and vulnerable persons safety

• Do not let persons, children included, with reduced physical sensory, reduced mental

functions or lack of experience and knowledge to use the appliance. They must have

supervision or instruction for the operation of the appliance by a person who is respon-

sible for their safety.

• Keep all packaging away from children. There is the risk of suffocation or injury.

• Keep all detergents in a safe area. Do not let the children touch the detergents.

• Keep children and pets away from the appliance when the door is open.

General safety

• Do not change the specifications of this appliance. There is the risk of injury and dam-

age to the appliance.

• Obey the safety instructions from the detergent manufacturer to prevent burns to

eyes, mouth and throat.

• Do not drink the water from the appliance. Particles of detergent can stay in your ap-

pliance.

• Do not keep the appliance door open without supervision. This to prevent injury and

to fall on an open door.

• Do not sit or stand on the open door.

Use

• The appliance is only for domestic use. Do not use the appliance for other uses to pre-

vent injury to persons and damage to property.

• Only use the appliance to clean accessories that are applicable for dishwashers.

• Do not put flammable products or items that are wet with flammable products in,

near or on the appliance. Risk of explosion or fire.

• Put the knives and all items with sharp points in the cutlery basket with their points

down. If not, put in a horizontal position in the upper basket or in the knife basket.

(Not all models have the knife basket).

• Use only specified products for dishwashers (detergent, salt, rinse aid).

• Types of salt that are not specified for dishwashers can cause damage to the water

softener.

• Fill the appliance with salt before you start a washing programme. Remaining salt in

the appliance can cause corrosion or make a hole in the bottom of the appliance.

4

Safety information

• Do not fill the rinse aid dispenser with other products than the rinse aid, (dishwasher

cleaning agent, liquid detergent). This can cause damage to the appliance.

• Make sure that the spray arms can move freely before you start a washing programme.

• The appliance can release hot steam if you open the door while a washing programme

operates. There is a risk of skin burns.

• Do not remove the dishes from the appliance until the washing programme is completed.

Care and cleaning

• Before you clean the appliance, deactivate it and disconnect the mains plug from the

mains socket.

• Do not use flammable products or products that can cause corrosion.

• Do not use the appliance without the filters. Make sure that the installation of the

filters is correct. An incorrect installation causes unsatisfactory washing results and

damage to the appliance.

• Do not use spray water or steam to clean the appliance. Risk of electrical shock and

damage to the appliance.

Installation

• Make sure that the appliance is not damaged. Do not install or connect a damaged

appliance, contact the supplier.

• Remove all packaging before you install and use the appliance.

• Only a qualified person must do the electrical connection, the plumbing and the instal-

lation of the appliance. This to prevent the risks of structural damage or injury.

• Make sure that the mains plug is disconnected from the mains socket during installation.

• Do not drill into the sides of the appliance to prevent damage to hydraulic compo-

nents and electrical components.

•

Important! Obey the instructions in the template supplied with the appliance:

– To install the appliance.

– To assemble the door panel.

– To connect to the water supply and drain.

• Make sure that the appliance is installed below and adjacent to safe structures.

Frost precautions

• Do not install the appliance where the temperature is less than 0 °C.

• The manufacturer is not responsible for frost damage.

Water connection

• Use new hoses to connect the appliance to the water supply. Do not use used hoses.

• Do not connect the appliance to new pipes or pipes not used for a long time. Let the

water flow for some minutes, then connect the inlet hose.

• Make sure not to squash or cause damage to the water hoses when you install the

appliance.

• Make sure that the water couplings are tight to prevent a water leakage.

• The first time you use the appliance, make sure that the hoses do not have water leaks.

Safety information

5

• The water inlet hose has a safety valve and a double sheath with an inner mains cable.

There is pressure in the water inlet hose only when the water flows. If there is a leak in

the water inlet hose, the safety valve interrupts the flow of water.

– Be careful when you connect the water inlet hose:

– Do not put the water inlet hose or the safety valve in water.

– If the water inlet hose or the safety valve are damaged, immediately disconnect

the mains plug from the mains socket.

– Contact the service centre to replace the water inlet hose with safety valve.

WARNING!

Dangerous voltage.

Electrical connection

• The appliance must be earthed.

• Make sure that the electrical information on the rating plate agrees with the power

supply.

• Always use a correctly installed shockproof socket.

• Do not use multiple plugs and extension cables. There is a risk of fire.

• Do not replace or change the mains cable. Contact the service centre.

• Make sure not to squash or cause damage to the mains plug and cable behind the

appliance.

• Make sure that there is access to the mains plug after the installation.

• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.

Service centre

• Only a qualified person can repair or work on the appliance. Contact the service centre.

• Use only original spare parts.

To discard the appliance

• To prevent the risk of injury or damage:

– Disconnect the mains plug from the mains socket.

– Cut off the mains cable and discard it.

6

Safety information

– Remove the door catch. This prevents children or pets to be closed in the appliance.

There is a risk of suffocation.

– Discard the appliance at the local waste disposal centre.

WARNING!

The dishwasher detergents are dangerous and can cause corrosion !

• If an accident occurs with these detergents, contact immediately a physician.

• If the detergent gets into the mouth, contact immediately a physician.

• If the detergent gets into the eyes, contact immediately a physician and clean the eyes

with water.

• Keep dishwasher detergents in a safe area and out of children touch.

• Do not keep the appliance door open when there is detergent in the detergent dispenser.

• Fill the detergent dispenser only before you start a washing programme.

PRODUCT DESCRIPTION

2

3

4

5

6

7

1

8

9

10

1 Upper basket

2 Water hardness dial

3 Salt container

4 Detergent dispenser

5 Rinse aid dispenser

6 Rating plate

7 Filters

8 Lower spray arm

9 Upper spray arm

10 Top spray arm

Product description

7

Visual signal

• When the washing programme starts, a red visual signal shows on the floor below the

appliance door. This red signal stays on until the washing programme is completed.

• When the washing programme is completed , a green visual signal shows on the floor

below the appliance door.

• When the appliance has a malfunction, a red visual signal flashes on the floor below

the appliance door.

If the appliance is installed in height, with a flush kitchen furniture door, the visual sig-

nal does not show.

CONTROL PANEL

The controls are on the top on the control panel. To operate with the controls, keep the

appliance door ajar.

1

3

4

6

5

2

AB

C

D

E

1 On/off button

2 Display

3 Delay button

4 Programme buttons

5 Indicators

6 Function buttons

Indicators

Salt indicator. It comes on when it is necessary to fill the salt container.

1)

After you fill the container, the salt indicator can stay on for some hours. This

does not have an unwanted effect on the operation of the appliance.

Rinse aid indicator. It comes on when it is necessary to fill the rinse aid dis-

penser.

1)

Multitab indicator. It comes on when you activate the function.

1) When the salt container and/or the rinse aid dispenser are empty, the related indicators do not come on

while a washing programme operates.

On/off button

Press this button to activate or deactivate the appliance.

After ten minutes from the end of the washing programme, the AUTO OFF function auto-

matically deactivates the appliance. This helps to decrease energy consumption.

8

Control panel

Display

The display shows:

• The electronic adjustment of the level of the water softener

• The activation and deactivation of the rinse aid dispenser (only with the multitab func-

tion on)

• The time of the washing programme

• The remaining time to the end of the washing programme

• The end of a washing programme (the display shows a zero)

• The time of the delay start

• The alarm codes

• The activation and deactivation of the acoustic signals.

Delay button

Press this button again and again to delay the start of the washing programme from 1 to

24 hours.

Programme buttons

Press one of these buttons to set a washing programme. The related indicator comes on.

Refer to 'Washing programmes'.

Function buttons

With these buttons you can:

• Adjust electronically the level of the water softener. Refer to 'Setting the water softener'.

• Activate and deactivate the multitab function. Refer to 'Multitab function'.

• Activate and deactivate the rinse aid dispenser (only with the multitab function on).

Refer to 'What to do if...'.

• Cancel a washing programme in operation or the countdown of the delay start. Refer

to 'Select and start a washing programme'.

• Activate and deactivate the acoustic signals. Refer to 'Acoustic signals'.

Setting mode

The appliance must be in setting mode for these operations:

• To set and start a washing programme.

• To set and start a delay start.

• To adjust electronically the level of the water softener.

• To activate or deactivate the multitab function.

• To activate or deactivate the rinse aid dispenser (only with the multitab function on).

• To deactivate or activate the acoustic signals.

Activate the appliance. The appliance is in setting mode when:

• All the programme indicators come on.

Activate the appliance. The appliance is not in setting mode when:

• Only one programme indicator comes on.

Control panel

9

• The display shows the time of the washing programme or of the delay start.

– It is necessary to cancel the programme or the delay start to go back to the setting

mode. Refer to 'Select and start a washing programme'.

Acoustic signals

You can hear the acoustic signals in these conditions:

• The washing programme is completed.

• The level of the water softener is adjusted electronically.

• The appliance has a malfunction.

Factory setting: on.

Deactivating the acoustic signals

1. Activate the appliance.

2. Make sure that the appliance is in setting mode.

3. Press and hold function button (B) and function button (C) at the same time until

the indicators of function buttons (A), (B) and (C) flash.

4. Release function button (B) and function button (C).

5. Press function button (C),

• The indicators of function buttons (A) and (B) go off.

• The indicator of function button (C) continues to flash.

• The display shows the setting of the acoustic signals.

The acoustic signals are on.

The acoustic signals are off.

6. Press function button (C) to change the setting

7. Deactivate the appliance to confirm.

To activate the acoustic signals again, do steps (1) through (7).

USE OF THE APPLIANCE

1. Be sure that the set level of the water softener agrees with the water hardness in

your area. If not, adjust the water softener.

2. Fill the salt container with dishwasher salt.

3. Fill the rinse aid dispenser with rinse aid.

4. Load cutlery and dishes into the appliance.

5. Set the correct washing programme for the type of load and soil.

6. Fill the detergent dispenser with the correct quantity of detergent.

7. Start the washing programme.

If you use the combi detergent tablets ('3 in 1', '4 in 1', '5 in 1'), use the multitab function

(refer to 'Multitab function').

10

Use of the appliance

SETTING THE WATER SOFTENER

The water softener removes minerals and salts from the water supply. These minerals and

salts can cause damage to the appliance.

Adjust the level of the water softener if this does not agree with the water hardness in

your area.

Contact your local water authority to know the water hardness in your area.

Water hardness

Water hardness ad-

justment

German degrees

(°dH)

French degrees

(TH°)

mmol/l Clarke de-

grees

manually elec-

troni-

cally

51 - 70 91 - 125 9,1 - 12,5 64 - 88

2

1)

10

43 - 50 76 - 90 7,6 - 9,0 53 - 63

2

1)

9

37 - 42 65 - 75 6,5 - 7,5 46 - 52

2

1)

8

29 - 36 51 - 64 5,1 - 6,4 36 - 45

2

1)

7

23 - 28 40 - 50 4,0 - 5,0 28 - 35

2

1)

6

19 - 22 33 - 39 3,3 - 3,9 23 - 27

2

1)

5

1)

15 - 18 26 - 32 2,6 - 3,2 18 - 22 1 4

11 - 14 19 - 25 1,9 - 2,5 13 - 17 1 3

4 - 10 7 - 18 0,7 - 1,8 5 - 12 1 2

< 4 < 7 < 0,7 < 5

1

2)

1

2)

1) Factory position.

2) Do not use salt at this level.

You must adjust the water softener manually and electronically.

Manual adjustment

Turn the water hardness dial to the position 1 or

2 (refer to the table).

Electronic adjustment

1. Activate the appliance.

2. Make sure that the appliance is in setting mode.

Setting the water softener

11

3. Press and hold function buttons (B) and (C) at the same time until the indicators of

function buttons (A), (B) and (C) flash.

4. Release function buttons (B) and (C).

5. Press function button (A),

• The indicators of function buttons (B) and (C) go off.

• The indicator of function button (A) continues to flash.

• The acoustic signals sound.

• The display shows the setting of the water softener (example:

and you hear

five acoustic signals = level 5).

6. Press function button (A) again and again to change the setting.

7. Deactivate the appliance to confirm.

If the water softener is set electronically to the level 1, the salt indicator stays off.

USE OF DISHWASHER SALT

How to fill the salt container

1. Turn the cap counterclockwise and open

the salt container.

2. Fill the salt container with 1 litre of wa-

ter (only for the first time you fill with

salt).

3. Use the funnel to fill the salt container

with salt.

4. Remove the salt around the opening of

the salt container.

5. Turn the cap clockwise to close the salt

container.

It is correct that water comes out from the salt container when you fill it with salt.

12

Use of dishwasher salt

USE OF DETERGENT AND RINSE AID

20

30

M

A

X

1

2

3

4

+

-

1

2

3

4

5

6

7

Use of detergent

To help the environment, do not use more than the correct quantity of detergent.

Obey the instructions on the detergent packaging.

How to fill the detergent dispenser:

1.

Press the release button

2

to open the lid

7

of the detergent dispenser.

2.

Put the detergent in the dispenser

1

.

3. If the washing programme has a prewash phase, put a small quantity of detergent

on the inner part of the appliance door.

4.

If you use the detergent tablets, put the tablet in the detergent dispenser

1

.

5. Close the detergent dispenser. Press the lid until it locks into position.

Use long washing programmes when you use the detergent tablets. These cannot fully

dissolve with short washing programmes and can decrease the washing results.

Use of rinse aid

Rinse aid makes it possible to dry the dishes without streaks and stains.

The rinse aid dispenser automatically adds rinse aid during the last rinsing phase.

Do these steps to fill the rinse aid dispenser:

1.

Press the release button

6

to open the lid

5

of the rinse aid dispenser.

2.

Fill the rinse aid dispenser

3

with rinse aid. The mark 'max' shows the maximum level.

3. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam dur-

ing the washing programme.

4. Close the rinse aid dispenser. Press the lid until it locks into position.

Adjust the rinse aid dosage

Factory set: position 3.

Use of detergent and rinse aid

13

You can set the rinse aid dosage between position 1 (lowest dosage) and position 4 (high-

est dosage).

Turn the rinse aid selector

4

to increase or decrease the dosage.

MULTITAB FUNCTION

The multitab function is for combi detergent tablets.

These tablets contain agents as detergent, rinse aid and dishwasher salt. Some types of

tablets can contain other agents.

Be sure that these tablets are applicable for the water hardness in your area (refer to the

instructions on the packaging of the products).

The multitab function deactivates the flow of rinse aid and salt.

The multitab function deactivates the indicators of salt and rinse aid.

The programme duration can increase if you use the multitab function.

Activate or deactivate the multitab function before the start of a washing programme.

You cannot activate or deactivate the function when a washing programme operates.

To activate the multitab function

1. Activate the appliance.

2. Make sure that the appliance is in setting mode.

3. Press and hold function buttons (D) and (E) at the same time until the multitab indi-

cator comes on.

4. Release function buttons (D) and (E). The function is activated.

• When you activate the multitab function, it stays on until you deactivate it.

To deactivate the multitab function and use separately detergent, salt and rinse aid

1. Activate the appliance.

2. Make sure that the appliance is in setting mode.

3. Press and hold at the same time, function buttons (D) and (E) until the multitab indi-

cator goes on.

4. Release function buttons (D) and (E). The function is deactivated.

5. Fill the salt container and the rinse aid dispenser.

6. Adjust the water hardness to the highest level.

7. Start a washing programme without dishes.

8. When the washing programme is completed, adjust the water softener to the water

hardness in your area.

9. Adjust the quantity of rinse aid.

LOADING CUTLERY AND DISHES

Refer to the leaflet 'Examples of ProClean loads'.

14

Multitab function

Hints and tips

• Do not put in the appliance items that can absorb water (sponges, household cloths).

• Remove the remaining food from the items.

• Make soft the remaining burned food on the items.

• Put hollow items (cups, glasses and pans) with the opening down.

• Make sure that water does not collect in containers or in bowls.

• Make sure that cutlery and dishes do not bond together.

• Make sure that the glasses do not touch other glasses.

• Put small items in the cutlery basket.

• Mix the spoons with other cutlery to prevent them to bond together.

• When you put the items in the baskets, make sure that the water can touch all surfaces.

• Put light items in the upper basket. Make sure that the items do not move.

• Water droplets can collect on plastic items and non-stick pans.

WASHING PROGRAMMES

Programme Type of soil Type of load Programme description

1)

All Crockery, cutlery,

pots and pans

Prewash

Wash 45 °C or 70 °C

Rinses

Dry

Heavy soil Crockery, cutlery,

pots and pans

Prewash

Wash 70 °C

Rinses

Dry

2)

Fresh soil Crockery and cutlery Wash 60°C

Rinse

3)

Normal soil Crockery and cutlery Prewash

Wash 50 °C

Rinses

Dry

Use this programme to quickly rinse the

dishes. This prevents the remaining food to

bond on the dishes and bad odours to come

out from the appliance.

Do not use detergent with this programme.

Rinse

1) The appliance senses the type of soil and the quantity of items in the baskets. It automatically adjusts the

temperature and quantity of the water, the energy consumption and the programme time.

2) With this programme you can wash a load with fresh soil. It gives good washing results in a short time

3) This is the standard programme for test institutes. With this programme you have the most efficient use of

water and energy consumption for crockery and cutlery with normal soil. Refer to the supplied leaflet for

test information.

Washing programmes

15

Consumption values

Programme

1)

Energy (kWh) Water (litre)

0,9 - 1,7 8 - 15

1,5 - 1,6 13 - 14

0,9 9

0,9 - 1,0 9 - 11

0,1 4

1) The display shows the programme time.

The water pressure and temperature, the variations of the mains supply and the quantity

of dishes can change the consumption values.

SELECT AND START A WASHING PROGRAMME

Starting the washing programme without delay start

1. Activate the appliance.

2. Make sure that the appliance is in setting mode.

3. Set the washing programme.

• The related programme indicator comes on.

• The programme time flashes in the display.

4. Close the appliance door, the washing programme starts automatically.

Starting the washing programme with delay start

1. Activate the appliance.

2. Make sure that the appliance is in setting mode.

3. Set the washing programme.

4. Press the delay button again and again until the display shows the time of the delay

start.

• The time of the delay flashes in the display.

• The delay indicator is on.

5. Close the appliance door, the countdown starts automatically.

• When the countdown is completed, the washing programme starts automatically.

The opening of the appliance door stops the countdown. When you close the door, the

countdown continues from the point of interruption.

16

Select and start a washing programme

Cancelling the delay start

If the appliance door is open, and the countdown has not started

1. Press the delay button again and again until the display shows the time of the wash-

ing programme.

• The time flashes in the display.

2. Close the appliance door, the washing programme starts automatically.

If the appliance door is closed, and the countdown operates

1. Open the appliance door.

2. Press the delay button again and again until the display shows the time of the wash-

ing programme.

3. Close the appliance door, the washing programme starts automatically.

Interruption of a washing programme

• Open the appliance door.

– The washing programme stops.

• Close the appliance door.

– The washing programme continues from the point of interruption.

Cancelling the washing programme

If the washing programme has not started, you can change the selection.

To change the selection while the washing programme operates, it is necessary to cancel

the programme.

1. Press and hold at the same time, function buttons (B) and (C) until all the pro-

gramme button indicators come on.

2. Release function buttons (B) and (C). The set programme is cancelled.

Make sure that there is detergent in the detergent dispenser before you start a new wash-

ing programme.

End of the washing programme

When the washing programme is completed, an intermittent acoustic signal sounds.

1. Open the appliance door, the display shows a zero.

2. Deactivate the appliance.

3. For better drying results, keep the appliance door ajar for some minutes.

Remove the items from the baskets

• Let the dishes become cold before you remove them from the appliance. Hot dishes

can be easily damaged.

• First remove the items from the lower basket, then from the upper basket.

• There can be water on the sides and on the door of the appliance. Stainless steel be-

comes cool more quickly than the dishes.

Select and start a washing programme

17

CARE AND CLEANING

To remove and clean the filters

Dirty filters decrease the washing results.

Although the maintenance is very low with these filters, make a check at intervals and if

necessary, clean them.

1. Turn the filter (A) counterclockwise and

remove it out from filter (B).

2. Filter (A) has two parts. To disassemble

the filter, pull them apart.

3. Fully clean the parts with water.

4. Put the two parts of the filter (A) togeth-

er and push. Make sure that they assem-

ble correctly in each other.

5. Remove the filter (B).

6. Fully clean the filter (B) with water.

7. Put the filter (B) to its initial position.

Make sure that it assembles correctly in

the two guides (C).

8. Put the filter (A) into position in filter

(B). Turn the filter (A) clockwise until it

locks.

To clean the spray arms

Do not remove the spray arms.

A

B

C

18

Care and cleaning

If the holes in the spray arms become clogged, remove remaining parts of soil with a

thin pointed object.

To clean the external surfaces

Clean the external surfaces of the appliance and control panel with a moist soft cloth.

Only use neutral detergents.

Do not use abrasive products, abrasive cleaning pads or solvents (acetone).

WHAT TO DO IF…

The start of the appliance does not occur or it stops during operation.

First try to find a solution to the problem (refer to the table). If not, contact the service

centre.

With some malfunctions, the display shows an alarm code:

•

- The appliance does not fill with water

•

- The appliance does not drain the water

•

- The anti-flood device is on.

WARNING!

Deactivate the appliance before you do the checks.

Malfunction Possible cause Possible solution

The appliance does not fill

with water.

The water tap is blocked or

there is limescale on it.

Clean the water tap.

The water pressure is too low. Contact your local water au-

thority.

The water tap is closed. Open the water tap.

The filter in the water inlet

hose is blocked.

Clean the filter.

The connection of the water in-

let hose is not correct.

Make sure that the connection

is correct.

The water inlet hose is dam-

aged.

Make sure that the water inlet

hose has no damages.

The appliance does not drain

the water.

There is a blockage in the sink

spigot.

Clean the sink spigot.

The connection of the water

drain hose is not correct.

Make sure that the connection

is correct.

The water drain hose is dam-

aged.

Make sure that the water

drain hose has no damages.

The anti-flood device is on. Close the water tap and con-

tact the service centre.

The start of the washing pro-

gramme does not occur.

The appliance door is open. Close the appliance door.

What to do if…

19

Malfunction Possible cause Possible solution

The mains plug is not connec-

ted in the mains socket.

Connect the mains plug.

The fuse in the fuse box is dam-

aged.

Replace the fuse.

The delay start is set. • Cancel the delay start.

• When the countdown is

completed, the washing pro-

gramme starts automatical-

ly.

After the check, activate the appliance. The programme continues from the point of inter-

ruption.

If the malfunction occurs again, contact the service centre.

If the display shows other alarm codes, contact the service centre.

The necessary information for the service centre is on the rating plate.

Record this information:

– Model (MOD.) ........................................................

– Product number (PNC) ..........................................

– Serial number (S.N.) ..............................................

The washing results and drying results are not satisfactory

Problem Possible cause Possible solution

The dishes are not clean. The washing programme was

not applicable for the type of

load and soil.

Make sure that the washing

programme is applicable for

the type of load and soil.

You did not put the items cor-

rectly in the baskets, water did

not touch all surfaces.

Put the items correctly in the

baskets.

The spray arms could not turn

freely. Incorrect position of

the items in the baskets.

Make sure that an incorrect po-

sition of the items do not

cause the blockage of the

spray arms.

The filters are dirty or not as-

sembled and installed correct-

ly.

Make sure that the filters are

clean and correctly assembled

and installed.

The quantity of detergent was

not sufficient or missing.

Make sure that the quantity of

detergent is sufficient.

Limescale particles on the

dishes.

The salt container is empty. Fill the salt container with dish-

washer salt.

Incorrect level of the water

softener adjustment.

Adjust the water softener with

the correct level.

The salt container cap is not

closed correctly.

Make sure that the salt con-

tainer cap is closed correctly.

20

What to do if…

La pagina si sta caricando...

Aeg-Electrolux F55002VI0P Manuale utente

Aeg-Electrolux F55002VI0P Manuale utente

in altre lingue

Documenti correlati

Altri documenti