Sony CDX-HR910UI Manuale del proprietario

Operating Instructions

Mode d’emploi

Manual de instrucciones

Bedienungsanleitung

Gebruiksaanwijzing

Istruzioni per l’uso

FR

GB

4-127-574-21 (1)

CDX-HR910UI

ES

DE

NLNL

To cancel the demonstration (DEMO) display, see page 6.

Pour annuler la demonstration (DEMO), reportez-vous a la page 6.

Para cancelar la pantalla de demostración (DEMO), consulte la página 6.

Zum Deaktivieren der Demo-Anzeige (DEMO) schlagen Sie bitte auf Seite 6 nach.

Om de demonstratie (DEMO) te annuleren, zie pagina 6.

Per annullare la dimostrazione (DEMO), vedere pagina 6.

FM/MW/LW Compact Disc Player

IT

FM/MW/LW

Compact Disc Player

2

ZAPPIN is a trademark of Sony Corporation.

iPod is a trademark of Apple Inc., registered in

the U.S. and other countries.

iPhone is a trademark of Apple Inc.

For installation and connections, see the

supplied installation/connections manual.

This label is located on the bottom of the

chassis.

Notice for customers: the following

information is only applicable to

equipment sold in countries applying

EU Directives

The manufacturer of this product is Sony

Corporation, 1-7-1 Konan, Minato-ku, Tokyo,

Japan. The Authorized Representative for EMC

and product safety is Sony Deutschland GmbH,

Hedelfinger Strasse 61, 70327 Stuttgart,

Germany. For any service or guarantee matters

please refer to the addresses given in separate

service or guarantee documents.

Disposal of Old Electrical &

Electronic Equipment (Applicable in

the European Union and other

European countries with separate

collection systems)

This symbol on the product or on its

packaging indicates that this product shall not be treated

as household waste. Instead it shall be handed over to the

applicable collection point for the recycling of electrical

and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential

negative consequences for the environment and human

health, which could otherwise be caused by inappropriate

waste handling of this product. The recycling of materials

will help to conserve natural resources. For more detailed

information about recycling of this product, please contact

your local Civic Office, your household waste disposal

service or the shop where you purchased the product.

Applicable accessory: Remote commander

Disposal of waste batteries

(applicable in the European Union

and other European countries with

separate collection systems)

This symbol on the battery or on the packaging indicates

that the battery provided with this product shall not be

treated as household waste. By ensuring these batteries are

disposed of correctly, you will help prevent potentially

negative consequences for the environment and human

health which could otherwise be caused by inappropriate

waste handling of the battery. The recycling of the

materials will help to conserve natural resources.

In case of products that for safety, performance or data

integrity reasons require a permanent connection with an

incorporated battery, this battery should be replaced by

qualified service staff only. To ensure that the battery will

be treated properly, hand over the product at end-of-life to

the applicable collection point for the recycling of

electrical and electronic equipment.

For all other batteries, please view the section on how to

remove the battery from the product safely. Hand the

battery over to the applicable collection point for the

recycling of waste batteries.

For more detailed information about recycling of this

product or battery, please contact your local Civic Office,

your household waste disposal service or the shop where

you purchased the product.

Windows Media, and the

Windows logo are trademarks

or registered trademarks of

Microsoft Corporation in the

U

nited States and/or other countries.

MPEG Layer-3 audio coding technology and

patents licensed from Fraunhofer IIS and Thomson.

This product is protected by certain intellectual

property rights of Microsoft Corporation. Use or

distribution of such technology outside of this

product is prohibited without a license from

Microsoft or an authorized Microsoft subsidiary.

3

Warning if your boat’s ignition has no

ACC position

Be sure to set the Auto Off function (page 20).

The unit will shut off completely and

automatically in the set time after the unit is

turned off, which prevents battery drain.

If you do not set the Auto Off function, press

and hold (OFF) until the display disappears

each time you turn the ignition off.

Content providers are using the digital rights

management technology for Windows Media

contained in this device (“WM-DRM”) to protect

the integrity of their content (“Secure Content”) so

that their intellectual property, including copyright,

in such content is not misappropriated.

This device uses WM-DRM software to play

Secure Content (“WM-DRM Software”). If the

security of the WM-DRM Software in this device

has been compromised, owners of Secure Content

(“Secure Content Owners”) may request that

Microsoft revoke the WM-DRM Software’s right

to acquire new licenses to copy, display and/or

play Secure Content. Revocation does not alter the

WM-DRM Software’s ability to play unprotected

content. A list of revoked WM-DRM Software is

sent to your device whenever you download a

license for Secure Content from the Internet or

from a PC. Microsoft may, in conjunction with

such license, also download revocation lists onto

your device on behalf of Secure Content Owners.

4

Table of Contents

Getting Started

Playable discs on this unit . . . . . . . . . . . . . . . . . 6

Resetting the unit. . . . . . . . . . . . . . . . . . . . . . . . 6

Canceling the DEMO mode . . . . . . . . . . . . . . . 6

Preparing the card remote commander . . . . . . . 7

Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . 7

Location of controls and basic

operations

Main unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Card remote commander RM-X151 . . . . . . 10

Searching for a track . . . . . . . . . . . . . . . . . . . . 11

Searching a track by name

— Quick-BrowZer . . . . . . . . . . . . . . . . . . . 11

Searching a track by listening to track passages

— ZAPPIN™ . . . . . . . . . . . . . . . . . . . . . . . 11

Radio

Storing and receiving stations . . . . . . . . . . . . . 12

Storing automatically — BTM . . . . . . . . . . 12

Storing manually. . . . . . . . . . . . . . . . . . . . . 12

Receiving the stored stations . . . . . . . . . . . 12

Tuning automatically . . . . . . . . . . . . . . . . . 12

RDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Setting AF and TA . . . . . . . . . . . . . . . . . . . 13

Selecting PTY . . . . . . . . . . . . . . . . . . . . . . . 13

Setting CT. . . . . . . . . . . . . . . . . . . . . . . . . . 14

CD

Playing a disc. . . . . . . . . . . . . . . . . . . . . . . . . . 14

Display items . . . . . . . . . . . . . . . . . . . . . . . 15

Repeat and shuffle play. . . . . . . . . . . . . . . . 15

USB devices

Playing back a USB device. . . . . . . . . . . . . . . 15

Display items . . . . . . . . . . . . . . . . . . . . . . . 16

Repeat and shuffle play . . . . . . . . . . . . . . . 16

iPod

Playing back iPod . . . . . . . . . . . . . . . . . . . . . . 17

Display items . . . . . . . . . . . . . . . . . . . . . . . 17

Setting the play mode . . . . . . . . . . . . . . . . . . . 18

Repeat and shuffle play . . . . . . . . . . . . . . . 18

Operating an iPod directly

— Passenger control . . . . . . . . . . . . . . . . . . . . 18

Other functions

Changing the sound settings . . . . . . . . . . . . . . 19

Adjusting the sound characteristics . . . . . . 19

Customizing the equalizer curve

— EQ3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Adjusting setup items — SET . . . . . . . . . . . . 20

Memory backup . . . . . . . . . . . . . . . . . . . . . . . 20

Using optional equipment. . . . . . . . . . . . . . . . 21

CD changer. . . . . . . . . . . . . . . . . . . . . . . . . 21

Marine remote commander

RM-X60M/X11M . . . . . . . . . . . . . . . . . . . 21

Rotary commander RM-X4S . . . . . . . . . . . 22

Auxiliary audio equipment. . . . . . . . . . . . . 22

Additional Information

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Notes on discs . . . . . . . . . . . . . . . . . . . . . . 23

Playback order of MP3/WMA/AAC

files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

About iPod . . . . . . . . . . . . . . . . . . . . . . . . . 23

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 24

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 25

Error displays/Messages. . . . . . . . . . . . . . . 27

5

Support site

If you have any questions or for the latest support information on this

product, please visit the web site below:

http://support.sony-europe.com

Provides information on:

• Models and manufacturers of compatible digital audio players

• Supported MP3/WMA/AAC files

6

About water resistancy

This unit is designed for use in a marine

environment. To protect the unit from water spray,

waves, rain, moisture, ultraviolet rays, etc., the unit

has undergone the following tests to ensure

reliability and functionality (Front panel only):

• Water resistant front panel - IPx5 certified

• Salt fog resistant - Tested under ASTM B117

• Conformal coated circuit board

• UV resistant - Tested under ASTM G154

Notes

• Be sure to close the front panel to maintain water

resistant performance, except when inserting/

ejecting a disc.

• Do not allow water to contact the unit except the

front panel.

• Do not use this unit in the following places:

– places where the unit may be subject to high water

pressure, hot springs or bathtubs, etc.

– underwater.

Getting Started

Playable discs on this unit

This unit can play CD-DA (also containing CD

TEXT) and CD-R/CD-RW (MP3/WMA/AAC

files (page 23)).

Resetting the unit

Before operating the unit for the first time, or

after replacing the boat’s battery or changing the

connections, you must reset the unit.

Open the front panel (page 14) and press the

RESET button (page 8) with a pointed object,

such as a ball-point pen.

Note

Pressing the RESET button will erase the clock setting

and some stored contents.

Canceling the DEMO mode

You can cancel the demonstration display which

appears during turning off.

1 Press and hold (SELECT/ENTER).

The setup display appears.

2 Press (SEL ECT/ENTER ) repeatedly until

“DEMO” appears.

3 Rotate the control dial to select

“DEMO-OFF.”

4 Press and hold (SELECT/ENTER).

The setup is complete and the display returns

to normal play/reception mode.

Type of discs Label on the disc

CD-DA

MP3

WMA

AAC

7

Preparing the card remote

commander

Remove the insulation film.

Tip

For how to replace the battery, see page 24.

Setting the clock

The clock uses a 24-hour digital indication.

1 Press and hold (SELECT/ENTER).

The setup display appears.

2 Press (SELECT/ENTER) repeatedly until

“CLOCK-ADJ” appears.

3 Press (SEEK) +.

The hour indication flashes.

4 Rotate the control dial to set the hour

and minute.

To move the digital indication, press (SEEK)

–/+.

5 Press (SELECT/ENTER).

The setup is complete and the clock starts.

To display the clock, press (DSPL). Press

(DSPL) again to return to the previous display.

Tip

You can set the clock automatically with the RDS

feature (page 14).

8

Location of controls and basic operations

Main unit

Front panel opened

E

N

T

E

R

S

E

K

S

E

K

S

E

L

E

C

T

OFF

DSPL

EQ3

AF/TA

PTY

SCRL

MODE

ZAP

ALBUM

REP SHUF

PAUSE

DM

SOURCE

RESET

9

This section contains instructions on the location

of controls and basic operations. For details, see

the respective pages.

The corresponding buttons on the card remote

commander control the same functions as those

on the unit.

A AF (Alternative Frequencies)/

TA (Traffic Announcement)/

PTY (Program Type) button page 13

To set AF and TA (press); select PTY (press

and hold) in RDS.

B OFF button

To power off; stop the source.

C (BROWSE) button page 11

To enter the Quick-BrowZer mode.

D Control dial

To adjust volume; select setup items.

E Number buttons

CD/USB:

(1)/(2): ALBUM –/+ (during MP3/WMA/

AAC playback)

To skip albums (press); skip albums

continuously (press and hold).

(3): REP page 15, 16, 18

(4): SHUF page 15, 16, 18

(5): DM+

Improves digitally compressed sound,

such as MP3.

To activate the DM+ function, set

“ON.” To cancel, set “OFF.”

(6): PAUSE

To pause playback. To cancel, press

again.

Radio:

To receive stored stations (press); store

stations (press and hold).

F OPEN switch page 14

G Display window

H DSPL (display)/SCRL (scroll) button

page 12, 15, 16, 17, 18

To change display items (press); scroll the

display item (press and hold).

I EQ3 (equalizer) button page 19

To select an equalizer type (XPLOD,

VOCAL, EDGE, CRUISE, SPACE,

GRAVITY, CUSTOM or OFF).

J Receptor for the card remote

commander

K (BACK)/MODE button page 11, 12,

18

Press to: Return to the previous display/

select the radio band (FM/MW/LW)*/select

the play mode of iPod.

Press and hold to: Enter/cancel the passenger

control.

L SEEK –/+ buttons

CD/USB:

To skip tracks (press); skip tracks

continuously (press, then press again within

about 1 second and hold); reverse/fast-

forward a track (press and hold).

Radio:

To tune in stations automatically (press); find

a station manually (press and hold).

M SELECT/ENTER button

Press to: Enter sound setting/apply a setting.

Press and hold to: Enter menu.

N SOURCE button

To power on; change the source (Radio/CD/

USB/AUX)*.

O ZAP button page 11

To enter ZAPPIN™ mode.

P RESET button page 6

Q Disc slot page 14

To insert the disc.

R Z (eject) button page 14

To eject the disc.

continue to next page t

10

Card remote commander

RM-X151

The following buttons on the card remote

commander have also different buttons/functions

from the unit. Remove the insulation film before

use (page 7).

ql < (.)/, (>) buttons

To control radio/CD/USB, the same as

(SEEK) –/+ on the unit.

Setup, sound setting, etc., can be operated by

< ,.

w; DSPL (display) button page 12, 15,

16, 17, 18

To change display items.

wa VOL (volume) +/– button

To adjust volume.

ws ATT (attenuate) button

To attenuate the sound. To cancel, press

again.

wd SEL (select) button

The same as the SELECT/ENTER button on

the unit.

wf MODE button page 12, 18

Press to: Select the radio band (FM/MW/

LW)*/select the play mode of iPod.

Press and hold to: Enter/cancel the passenger

control.

wg M (+)/m (–) buttons

To control CD/USB, the same as (1)/(2)

(ALBUM –/+) on the unit.

Setup, sound setting, etc., can be operated by

M m.

wh SCRL (scroll) button

To scroll the display item.

wj Number buttons

To receive stored stations (press); store

stations (press and hold).

* In the case of a CD changer being connected; when

(SOURCE) is pressed, “CD” and the unit number will

appear in the display. Furthermore, if (MODE) is

pressed, you can switch the changer.

Note

If the unit is turned off and the display disappears, it

cannot be operated with the card remote commander

unless (SOURCE) on the unit is pressed, or a disc is

inserted to activate the unit first.

11

Searching for a track

Searching a track by name

— Quick-BrowZer

You can search for a track in a CD or USB device

easily by category.

1 Press (BROWSE).

The unit enters the Quick-BrowZer mode,

and the list of search categories appears.

2 Rotate the control dial to select the

desired search category, then press

(SELECT/ENTER) to confirm.

3 Repeat step 2 until the desired track is

selected.

Playback starts.

To return to the previous display

Press (BACK).

To exit the Quick-BrowZer mode

Press (BROWSE).

Note

When entering the Quick-BrowZer mode, the repeat/

shuffle setting is canceled.

Searching a track by listening to

track passages — ZAPPIN™

While playing back short track passages in a CD

or USB device in sequence, you can search for a

track you want to listen to.

ZAPPIN mode is suitable for searching for a

track in shuffle or shuffle repeat mode.

1 Press ( Z AP) during playback.

After “ZAPPIN” appears in the display,

playback starts from a passage of the next

track.

The passage is played for the set time, then a

click sounds and the next passage starts.

2 Press ( SEL EC T/ENTER ) or (ZAP) when

a track you want to listen is played

back.

The track that you select returns to normal

play mode from the beginning.

To search a track by ZAPPIN mode again,

repeat steps 1 and 2.

Tips

• You can select the playback time from about 6

seconds/9 seconds/30 seconds (page 20). You

cannot select the passage of the track to playback.

• Press (SEEK) –/+ or (1)/(2) (ALBUM –/+) in

ZAPPIN mode to skip a track or album.

E

N

T

E

R

S

E

K

S

E

K

S

E

L

E

C

T

OFF

DSPL

EQ3

AF/TA

PTY

SCRL

MODE

ZAP

ALBUM

REP SHUF

PAUSE

DM

SOURCE

(BROWSE)

Control dial

(BACK)

SELECT/ENTER

E

N

T

E

R

S

E

K

S

E

K

S

E

L

E

C

T

OFF

DSPL

EQ3

AF/TA

PTY

SCRL

MODE

ZAP

ALBUM

REP SHUF

PAUSE

DM

SOURCE

ZAP

SELECT/ENTER

1

2

3

4

ZAP

The part of each track to

playback in ZAPPIN mode.

Track

12

Radio

Storing and receiving stations

Caution

When tuning in stations while boating, use Best

Tuning Memory (BTM) to prevent an accident.

Storing automatically — BTM

1 Press (SOURCE) repeatedly until

“TUNER” appears.

To change the band, press (MODE)

repeatedly. You can select from FM1, FM2,

FM3, MW or LW.

2 Press and hold (SELECT/ENTER).

The setup display appears.

3 Press (SELECT/ENTER) repeatedly until

“BTM” appears.

4 Press (SEEK) +.

The unit stores stations in order of frequency

on the number buttons.

A beep sounds when the setting is stored.

Storing manually

1 While receiving the station that you

want to store, press and hold a

number button ((1) to (6)) until

“MEM” appears.

The number button indication appears in the

display.

Note

If you try to store another station on the same number

button, the previously stored station will be replaced.

Tip

When a RDS station is stored, the AF/TA setting is

also stored (page 13).

Receiving the stored stations

1 Select the band, then press a number

button ((1) to (6)).

Tuning automatically

1 Select the band, then press (SEEK) –/+

to search for the station.

Scanning stops when the unit receives a

station. Repeat this procedure until the

desired station is received.

Tip

If you know the frequency of the station you want to

listen to, press and hold (SEEK) –/+ to locate the

approximate frequency, then press (SEEK) –/+

repeatedly to fine adjust to the desired frequency

(manual tuning).

RDS

Overview

FM stations with Radio Data System (RDS)

service send inaudible digital information along

with the regular radio program signal.

Display items

A Radio band, Function

B TA /TP *

1

C Frequency*

2

(Program service name), Preset

number, Clock, RDS data

*1 “TA” flashes during traffic information. “TP” lights

up while such a station is received.

*2 While receiving the RDS station, “ *” is displayed

on the left of the frequency indication.

To change display items C, press ( D SPL).

RDS services

This unit automatically provides RDS services as

follows:

AF (Alternative Frequencies)

Selects and retunes the station with the

strongest signal in a network. By using this

function, you can continuously listen to the

same program during long-distance voyage

without having to retune the same station

manually.

TA (Traffic Announcement)/TP (Traffic

Program)

Provides current traffic information/programs.

Any information/program received, will

interrupt the currently selected source.

PTY (Program Types)

Displays the currently received program type.

Also searches your selected program type.

CT (Clock Time)

The CT data from the RDS transmission sets

the clock.

13

Notes

• Depending on the country/region, not all RDS

functions may be available.

• RDS will not work if the signal strength is too weak,

or if the station you are tuned to is not transmitting

RDS data.

Setting AF and TA

1 Press (AF/TA) repeatedly until the

desired setting appears.

Storing RDS stations with the AF and

TA setting

You can preset RDS stations along with the AF/

TA setting. If you use the BTM function, only

RDS stations are stored with the same AF/TA

setting.

If you preset manually, you can preset both RDS

and non-RDS stations with the AF/TA setting for

each.

1 Set AF/TA, then store the station with BTM or

manually.

Receiving emergency

announcements

With AF or TA on, the emergency

announcements will automatically interrupt the

currently selected source.

Tip

If you adjust the volume level during a traffic

announcement, that level will be stored into memory

for subsequent traffic announcements, independently

from the regular volume level.

Staying with one regional program

— REG

When the AF function is on: this unit’s factory

setting restricts reception to a specific region, so

you will not be switched to another regional

station with a stronger frequency.

If you leave this regional program’s reception

area, set “REG-OFF” in setup during FM

reception (page 20).

Note

This function does not work in the UK and in some

other areas.

Local Link function (UK only)

This function enables you to select other local

stations in the area, even if they are not stored on

your number buttons.

1 During FM reception, press a number button

((1) to (6)) on which a local station is stored.

2 Within 5 seconds, press again a number button

of the local station.

Repeat this procedure until the local station is

received.

Selecting PTY

1 Press and hold (AF/TA) (PTY) during

FM reception.

The current program type name appears if the

station is transmitting PTY data.

2 Press (AF/TA) (PTY) repeatedly until

the desired program type appears.

3 Press ( SEEK) –/+.

The unit starts to search for a station

broadcasting the selected program type.

Type of programs

Note

You cannot use this function in countries/regions

where no PTY data is available.

Select To

AF-ON activate AF and deactivate TA.

TA-ON activate TA and deactivate AF.

AF, TA-ON activate both AF and TA.

AF, TA-OFF deactivate both AF and TA.

NEWS (News), AFFAIRS (Current Affairs),

INFO (Information), SPORT (Sports),

EDUCATE (Education), DRAMA (Drama),

CULTURE (Culture), SCIENCE (Science),

VARIED (Varied), POP M (Popular Music),

ROCK M (Rock Music), EASY M (Easy

Listening), LIGHT M (Light Classical),

CLASSICS (Classical), OTHER M (Other

Music Type), WEATHER (Weather),

FINANCE (Finance), CHILDREN (Children’s

Programs), SOCIAL A (Social Affairs),

RELIGION (Religion), PHONE IN (Phone In),

TRAVEL (Travel), LEISURE (Leisure), JAZZ

(Jazz Music), COUNTRY (Country Music),

NATION M (National Music), OLDIES (Oldies

Music), FOLK M (Folk Music), DOCUMENT

(Documentary)

14

Setting CT

1 Set “CT-ON” in setup (page 20).

Notes

• The CT function may not work even though an RDS

station is being received.

• There might be a difference between the time set by

the CT function and the actual time.

CD

For details on selecting a CD changer, see

page 21.

Playing a disc

1 Slide the OPEN switch in the direction

of the arrow.

2 Open the front panel.

3 Insert the disc (label side up).

4 Close the front panel.

Playback starts automatically.

Notes

• Do not put anything on the inner surface of the front

panel.

• Be sure to close the front panel during operation.

Ejecting the disc

1 Slide the OPEN switch and open the

front panel.

2 Press Z.

The disc is ejected.

3 Close the front panel.

15

Display items

A Source

B Track name*

1

, Disc/artist name*

1

, Artist

name*

1

, Album number*

2

, Album name*

1

,

Track number/Elapsed playing time, Clock

*1 The information of a CD TEXT, MP3/WMA/AAC is

displayed.

*2 Album number is displayed only when the album is

changed.

To change display items B, press (DSPL).

Tip

Displayed items will differ, depending on the disc type,

recorded format and settings.

Repeat and shuffle play

1 During playback, press (3) (REP) or

(4) (SHUF) repeatedly until the

desired setting appears.

* When an MP3/WMA/AAC is played.

To return to normal play mode, select “ OFF”

or “SHUF OFF.”

USB devices

For details on the compatibility of your USB

device, visit the support site.

• MSC (Mass Storage Class) and MTP (Media

Transfer Protocol) type USB devices compliant

with the USB standard can be used.

• Corresponding codec is MP3 (.mp3), WMA

(.wma) and AAC (.m4a).

• Backup of data in a USB device is

recommended.

Note

Connect the USB device after starting the engine.

Depending on the USB device, malfunction or damage

may occur if it is connected before starting the engine.

Playing back a USB device

1 Remove the USB cap from the USB

connector and connect the USB

device to the USB connector.

Playback starts.

If a USB device is already connected, to start

playback, press (SOURCE) repeatedly until

“USB” appears.

Press (OFF) to stop playback.

Select To play

TRACK track repeatedly.

ALBUM* album repeatedly.

SHUF ALBUM* album in random order.

SHUF DISC disc in random order.

continue to next page t

Support site

http://support.sony-europe.com

16

Removing the USB device

1 Stop the USB device playback.

2 Remove the USB device.

If you remove your USB device during

playback, data in the USB device may be

damaged.

Notes

• Do not use USB devices so large or heavy that they

may fall down due to vibration, or cause a loose

connection.

• This unit cannot recognize USB devices via a USB

hub.

Display items

A Source

B Track name, Artist name, Album number*,

Album name, Track number/Elapsed playing

time, Clock

* Album number is displayed only when the album is

changed.

To change display items B , press (DSPL).

Notes

• Displayed items will differ, depending on the USB

device, recorded format and settings. For details,

visit the support site.

• The maximum number of displayable data is as

follows.

– folders (albums): 128

– files (tracks) per folder: 500

• Do not leave a USB device in a moored boat, as

malfunction may result.

• It may take time for playback to begin, depending on

the amount of recorded data.

• DRM (Digital Rights Management) files may not be

played.

• During playback or fast-forward/reverse of a VBR

(Variable Bit Rate) MP3/WMA/AAC file, elapsed

playing time may not display accurately.

• Playback of the following MP3/WMA/AAC files is not

supported.

– lossless compression

– copyright-protected

Repeat and shuffle play

1 During playback, press (3) (REP) or

(4) (SHUF) repeatedly until the

desired setting appears.

After 3 seconds, the setting is complete.

To return to normal play mode, select “ OFF”

or “SHUF OFF. ”

Select To play

TRACK track repeatedly.

ALBUM album repeatedly.

SHUF ALBUM album in random order.

SHUF DEVICE device in random order.

17

iPod

For details on the compatibility of your iPod, see

“About iPod” on page 23 or visit the support site.

In these Operating Instructions, “iPod” is used as

a general reference for the iPod functions on the

iPod and iPhone, unless otherwise specified by

the text or illustrations.

Playing back iPod

Before connecting the iPod, turn down the

volume of the unit.

1 Remove the USB cap from the USB

connector and connect the iPod to the

USB connector via the dock connector

to USB cable.

The iPod will turn on automatically, and the

display will appear on the iPod screen as

below.*

The tracks on the iPod start playing

automatically from the point last played.

If an iPod is already connected, to start

playback press (SOURCE) repeatedly until

“USB” appears. (“IPD” appears in the display

when iPod is recognized.)

* If the iPod was played back in the passenger control

last time, this will not appear.

2 Press (MODE) to select the play mode.

The mode changes as follows:

RESUMING t ALBUM t TRACK t

PODCAST* t GENRE t PLAYLIST

t ARTIST

* May not appear depending on iPod setting.

3 Adjust the volume.

Press (OFF) to stop playback.

Removing the iPod

1 Stop the iPod playback.

2 Remove the iPod.

Caution for iPhone

When you connect an iPhone via USB, telephone

volume is controlled by iPhone itself. In order to avoid

sudden loud sound after a call, do not increase the

volume on the unit during a telephone call.

Note

This unit cannot recognize iPod via a USB hub.

Tips

• We recommend the RC-100IP USB cable (not

supplied) to connect the dock connector.

• When the ignition key is turned to the ACC position,

and the unit is on, the iPod will be recharged.

• If the iPod is disconnected during playback, “NO

DEV” appears in the display of the unit.

Resume mode

When the iPod is connected to the dock

connector, the mode of this unit changes to

resume mode and playback starts in the mode set

by the iPod.

In resume mode, the following buttons do not

function.

– (3) (REP)

– (4) (SHUF)

Display items

A Source

B Track name, Artist name, Album name, Track

number/Elapsed playing time, Clock

To change display items B, press (DSPL).

Tip

When album/podcast/genre/artist/playlist is changed,

its item number appears momentarily.

Note

Some letters stored in iPod may not be displayed

correctly.

Support site

http://support.sony-europe.com

18

Setting the play mode

1 During playback, press (MODE).

The mode changes as follows:

ALBUM t TRACK t PODCAST* t

GENRE t PLAYLIST t ARTIST

* May not appear depending on iPod setting.

Skipping albums, podcasts, genres,

playlists and artists

Repeat and shuffle play

1 During playback, press (3) (REP) or

(4) (SHUF) repeatedly until the

desired setting appears.

After 3 seconds, the setting is complete.

To return to normal play mode, select “ OFF”

or “SHUF OFF.”

Operating an iPod directly

— Passenger control

You can operate an iPod connected to the dock

connector directly.

1 During playback, press and hold

(MODE).

“MODE IPD” appears and you will be able to

operate the iPod directly.

To change the display items

Press (D SPL).

The display items change as follows:

Track name t Artist name t Album name t

MODE IPD t Clock

To exit the passenger control

Press and hold (MODE).

Then “MODE AUD” will appear and the play

mode will change to “RESUMING.”

Notes

• The volume can be adjusted only by the unit.

• If this mode is canceled, the repeat setting will be

turned off.

To Press

Skip (1)/(2) (ALBUM –/+)

[press once for each]

Skip

continuously

(1)/(2) (ALBUM –/+)

[hold to desired point]

Select To play

TRACK track repeatedly.

ALBUM album repeatedly.

PODCAST podcast repeatedly.

ARTIST artist repeatedly.

PLAYLIST playlist repeatedly.

GENRE genre repeatedly.

SHUF ALBUM album in random order.

SHUF PODCAST podcast in random order.

SHUF ARTIST artist in random order.

SHUF PLAYLIST playlist in random order.

SHUF GENRE genre in random order.

SHUF DEVICE device in random order.

19

Other functions

Changing the sound settings

Adjusting the sound

characteristics

1 Press (SELECT/ENTER) repeatedly until

the desired item appears.

2 Rotate the control dial to adjust the

selected item.

3 Press (BACK).

The setting is complete and the display

returns to normal play/reception mode.

The following items can be set (follow the page

reference for details):

Customizing the equalizer curve

— EQ3

“CUSTOM” of EQ3 allows you to make your

own equalizer settings.

1 Select a source, then press (EQ3)

repeatedly to select “CUSTOM.”

2 Press (SELECT/ENTER) repeatedly until

“LOW,” “MID” or “HI” appears.

3 Rotate the control dial to adjust the

selected item.

The volume level is adjustable in 1 dB steps,

from –10 dB to +10 dB.

Repeat steps 2 and 3 to adjust the equalizer

curve.

To restore the factory-set equalizer curve,

press and hold (S ELECT/EN TER) before the

setting is complete.

4 Press (BACK).

The setting is complete and the display

returns to normal play/reception mode.

Tip

Other equalizer types are also adjustable.

DSO (Dynamic Soundstage Organizer)

Creates a more ambient sound field.

To select the DSO mode: “1,” “2,” “3” or “OFF.”

The larger the number, the more enhanced the

effect.

LOW*

1

, MID*

1

, HI*

1

(page 19)

BAL (Balance)

Adjusts the sound balance between the left and

right speakers.

FAD (Fader)

Adjusts the relative level between the front and

rear speakers.

SUB (Subwoofer volume)

Adjusts the subwoofer volume.

AUX (AUX level)*

2

Adjusts the volume level for each connected

auxiliary equipment: “+18 dB” – “0 dB” – “–8

dB.”

This setting negates the need to adjust the

volume level between sources.

*1 When EQ3 is activated.

*2 When AUX source is activated.

20

Adjusting setup items — SET

1 Press and hold (SELECT/ENTER).

The setup display appears.

2 Press (SELECT/ENTER) repeatedly until

the desired item appears.

3 Rotate the control dial to select the

setting (example “ON” or “OFF”).

4 Press and hold (SELECT/ENTER).

The setup is complete and the display returns

to normal play/reception mode.

Note

Displayed items will differ, depending on the source

and setting.

The following items can be set (follow the page

reference for details):

Memory backup

Your last settings are stored automatically.

Sound settings (except volume), setup items

(except clock) and tuner presets are stored in the

internal memory of the unit.

CLOCK-ADJ (Clock Adjust) (page 7)

CT (Clock Time)(page 12, 14).

BEEP

Activates the beep sound: “ON,” “OFF.”

AUX-A*

1

(AUX Audio)

Activates the AUX source display: “ON,”

“OFF”

A.OFF (Auto Off)

Shuts off automatically after a desired time

when the unit is turned off: “NO,” “30S

(seconds),” “30M (minutes),” “60M (minutes).”

DEMO

(Demonstration)

Activates the demonstration: “ON,” “OFF.”

DIM (Dimmer)

Changes the display brightness.

– “AT”: to dim the display automatically when

you turn lights on. (Available only when the

illumination control lead is connected.)

– “ON”: to dim the display.

– “OFF”: deactivate the dimmer.

CONTRAST

Adjusts the contrast of the display. The contrast

level is adjustable in 7 steps.

ILM (Illumination)

Changes the illumination color: “ILM-1,”

“ILM-2.”

M.DSPL (Motion Display)

Selects the Motion Display mode.

– “LM”: to show moving patterns and level

meter.

– “ON”: to show moving patterns.

– “OFF”: to deactivate the Motion Display.

A.SCRL (Auto Scroll)

Scrolls long items automatically: “ON,” “OFF.”

LOCAL (Local seek mode)

– “ON”: to only tune into stations with stronger

signals.

– “OFF”: to tune normal reception.

MONO*

2

(Monaural mode)

Selects monaural reception mode to improve

poor FM reception: “ON,” “OFF.”

REG*

2

(Regional) (page 13).

Z.TIME (Zappin Time)

Selects the playback time for the ZAPPIN

function.

– “Z.TIME-1 (6 seconds),” “Z.TIME-2 (9

seconds),” “Z.TIME-3 (30 seconds).”

LPF (Low Pass Filter)

Selects the subwoofer cut-off frequency: “OFF,”

“80Hz,” “100Hz,” “120Hz,” “140Hz,” “160Hz.”

LPF NORM/REV (Low Pass Filter Normal/

Reverse)

Selects the phase when the LPF is on: “NORM,”

“REV.”

HPF (High Pass Filter)

Selects the front/rear speaker cut-off frequency:

“OFF,” “80Hz,” “100Hz,” “120Hz,” “140Hz,”

“160Hz.”

LOUD (Loudness)

Reinforces bass and treble for clear sound at low

volume levels: “ON,” “OFF.”

BTM (page 12)

*1 When the unit is turned off.

*2 When FM is received.

La pagina sta caricando ...

Sony CDX-HR910UI Manuale del proprietario

Sony CDX-HR910UI Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti