EcoFlow 576 Wh River Max Portable Power Station Manuale utente

Tipo
Manuale utente
EcoFlow RIVER Max User Manual
EcoFlow RIVER Max Hereinafter referred to as RIVER Max
Read all safety tips, warning messages, terms of use, and disclaimers carefully. Refer to the
terms of use and disclaimer at https://ecoflow.com/pages/terms-of-use and stickers on
the product before use. Users take full responsibility for all usage and operations. Familiarize
yourself with the related regulations in your area. You are solely responsible for being aware
of all relevant regulations and using EcoFlow products in a way that is compliant.
DISCLAIMER
1
3
4
4
6
6
7
7
8
8
9
10
11
12
12
3.1 Product Details
3.2 LCD Screen
3.3 General Product Usage
3.4 AC Charging
3.5 Solar Charging
3.6 Car Charging
3.7 APP
3.8 X-Boost
3.9 Emergency Power Supply (EPS)
3.10 Uninstall the Extra Battery Module
1.
2. Safety Instructions
3. Getting Started
4. FAQs
5. Troubleshooting
6. What’s In the Box
7. Storage & Maintenance
CONTENTS
Specifications
2
2
2.1 Usage
2.2 Disposal Guide
1
1. Specifications
Input Ports
AC Charge
AC Input Voltage
Solar Charger
Car Charger
X-Stream Fast Charge 500W Max, 10A
220-240V~ 50Hz/60Hz, 10A
10-25V 12A, 200W Max
Supports 12V Battery, 8A
Max Device(s) Power Supported by X-Boost
USB-A (x2)
USB-A Fast Charge (x1)
USB-C (x1)
Car Charger(x1)
DC5521 Output (x2)
1800W
5V 2.4A 12W Max, per port, 24W total
5V 2.4A 9V 2A 12V 1.5A 18W Max, per port
5/9/12/15/20V 5A 100W Max, per port
13.6V 10A, 136W Max
13.6V 3A, per port
General Info
Output Ports
Net Weight
Dimensions
Capacity
Wi-Fi
Approximately 17 lbs(7.7kg)
11.4in x 7.3in x 9.3in(28.9 x 18.4 x 23.5 cm)
576Wh 28.8V
Supported
Battery Info
Cell Chemistry
Cycle Life
Lithium-ion
500 cycles to 80%+ capacity
* Car charger shares power with the DC5521 output port, offering a maximum output of 136W.
AC (x2) Pure Sine Wave, 600W total (Surge 1200W),
230V~ (50Hz/60Hz)
Environmental Operating Temperature
Optimal Operating Temperature
Discharge Temperature
Charge Temperature
Storage Temperature
* Whether the product can be charged or discharged depends on the actual temperature of the battery pack.
20°C~30°C (68°F~86°F)
-20°C~4C (-F~113°F)
0°C~45°C (32°F~113°F)
-20°C~4C(-4°F~113°F)
(optimal: 20°C~30°C(68°F~86°F))
Protection Over Voltage Protection, Overload Protection, Over
Temperature Protection, Short Circuit Protection,
Low Temperature Protection, Low Voltage Protection,
Overcurrent Protection
2
2.2 Disposal Guide
2. Safety Instructions
1. If conditions permit, make sure that the battery is fully discharged before disposing it in a designated
battery recycling bin. The product contains batteries with potentially dangerous chemicals, so it is
strictly prohibited to dispose of it in ordinary trash cans. For more details, please follow the local laws
and regulations on battery recycling and disposal.
2. If the battery cannot be fully discharged due to a product failure, please do not dispose of the
battery directly in the battery recycling box. In such case, you should contact a professional battery
recycling company for further processing.
3. Please dispose of over-discharged batteries that cannot be recharged.
1. Do not use the product near a heat source, such as a fire source or a heating furnace.
2. Avoid contact with any liquid. Do not immerse the product in water or get it wet. Do not use the
product in rain or humid environments.
3. Do not use the product in an environment with strong static electricity/magnetic fields.
4. Do not disassemble the product in any way or pierce the product with sharp objects.
5. Avoid using wires or other metal objects that may result in a short circuit.
6. Do not use unofficial components or accessories. If you need to replace any components or
accessories, please visit official EcoFlow channels to check relevant information.
7. When using the product, please strictly follow the operating environment temperature specified in
this user manual. If the temperature is too high, it may result in a fire or explosion; if the temperature
is too low, the product performance may be severely reduced, or the product may cease to work.
8. Do not stack any heavy objects on the product.
9. Do not lock the fan forcibly during use or place the product in an unventilated or dusty area.
10. Please avoid impact, falls, or severe vibrations when using the product. In case of a severe external
impact, turn off the power supply immediately and stop using the product. Ensure the product is
well fastened during transportation to avoid vibrations and impacts.
11. If you accidentally drop the product into water during use, please place it in a safe open area, and
stay away from it until it is completely dry. The dried product should not be used again, and should
be properly disposed of according to Section 2.2 below. If the product catches fire, we recommend
that you use the fire extinguishers in the following order: water or water mist, sand, fire blanket, dry
powder, and finally a carbon dioxide fire extinguisher.
12. Use a dry cloth to clean off dirt on the product ports.
13. Rest the product on a flat surface to avoid damages caused by the product falling over. If the
product is overturned and severely damaged, turn it off immediately, place the battery in an open
area, keep it away from combustible matter and people, and dispose of it in accordance with local
laws and regulations.
14. Ensure that the product is kept out of reach of children and pets.
2.1 Usage
3
LCD Screen
Solar/Car Charging Input Port
AC Output Sockets
Power Earth Screw
AC Power Button
USB-A Output Port
IOT Button
LED Light
ON/OFF Button
Ambient Light
X-Stream AC
Charging Input Port
USB-C 100WOutput Port
DC Power Button
USB-A Fast Charge
Output Port
Overload Protection Switch
Main Power Button
3.1 Product Details
Ventilation Fan
3. Getting Started
Car Outlet
DC5521 Output Port
International Version
4
3.2 LCD Screen
3.3 General Product Usage
Short Press to Turn On Long Press to Turn Off
Remaining Charge/
Discharge Time
Overload Warning
Fan Indicator
Low Temperature Warning
High Temperature Warning
Remaining Battery Percentage
Battery Failure Warning
Battery Level Indicator
Extra Battery
Indicator
AC Output
Wi-Fi Status
DC Output Indicator
State of Charge
USB-A Output
USB-C Output
Output Power
Input Power
Battery Level Indicator: The indicator will repeatedly fill while charging. If product is at 0% charge, the
indicator will flash to warn you.
Wi-Fi Status: After pressing the IOT button for 3 seconds, the Wi-Fi status will flash on the LCD screen
which indicates that the product is ready for pairing. There're two ways to connect the product with
the App, either directly connect to the product's hotspot or using the Internet. If the App is successfully
connected to the product's hotspot, the icon will keep flashing; if it is successfully connected to the
Internet, the icon will stay on.
* See Section 5 for more troubleshooting steps.
Short press the Main Power Button to turn on the product; the LCD Screen will light up and the
battery level indicator icon will display.
Product On, Product Off, LCD Screen On
The product enters sleep mode after 5 minutes of idle operation; the LCD Screen will automatically
turn off. When the product senses any load change or operations, the LCD Screen will automatically
light up. To turn the LCD Screen on or off, please short press the Main Power Button.
To power off the product, press and hold the Main Power Button.
The default product standby time is 2 hours. With other Power Buttons turned off and no other load
access for 2 hours, the product will automatically shut down. The standby time can be set on the App.
5
With the Main Power Button turned on, short press the
DC Power Button to use the DC Output port. Short press
the DC Power Button again to turn it off.
With the DC Power Button on, the product will not
automatically shut down.
DC Output Port
With the Main Power Button turned on, short press the
AC Power Button to use the AC Output ports. Short press
the AC Power Button again to turn it off.
The default standby time of the AC Output port is 12 hours.
Without any load access for 12 hours, the AC Power Button
will automatically turn off.
Please turn off AC power button when not in use to save
power consumption.
AC Output Port
Short Press DC Power Button
Short Press
AC Power Button
6
3.4 AC Charging
3.5 Solar Charging
X-Stream Fast Charging
500W Max input Power
<2 hrs Full Charge
AC Charging Cable
X-Stream is an AC fast charge technology that recharges your portable power station at the fastest
speed possible. For slower,quieter charging, download the EcoFlow app and enable Slow Charging.
The unit will shut down if the current from an AC source exceeds 10A for an extended period.
The Overload Protection Switch will need to be pressed before powering the unit back on.
Please use AC charging Cable for fast charging. EcoFlow takes no responsibilities for any
consequences caused by failures to follow instructions, including but not limited to charging with AC
charging Cable.
Users can connect solar panels in series as shown in the figure to recharge the product.
When using an EcoFlow solar panel to charge the product, please follow the instructions that come
with the solar panel.
Before connecting the solar panel, please ensure that the solar panel’s output voltage is within
voltage range to avoid product damage.
MC4
Solar Charging
Cable
7
3.6 Car Charging
3.7 APP
The EcoFlow App gives users the ability to control and monitor EcoFlow power stations remotely.
Read the EcoFlow App user guide and access the download link here:
https://ecoflow.com/pages/ecoflow-app
Privacy Policy
By using EcoFlow Products, Applications and Services, you consent to the EcoFlow Term of Use and
Privacy Policy, which you can access via the "About" section of the "User" page on the EcoFlow App
or on the official EcoFlow website at https://ecoflow.com/pages/terms-of-use and
https://ecoflow.com/pages/privacy-policy
Users can recharge the product through the Car Charging Input Port. Please charge using the
car charger after you’ve started the car to avoid failure to start due to insufficient car battery. In
addition, please make sure that Car Charging Input Port and the Car Charging Cable are in good
condition. EcoFlow takes no responsibilities for any losses or damages caused by failures to follow
instructions.
Car Charging Cable
8
To avoid operation failure due to overload protection, the X-Boost feature will be automatically
enabled when the total output exceeds the rated output power, which enables the product to
power high wattage appliances at the rated output power.
X-Boost Tips:
1. X-Boost is enabled by default; you can enable or disable it in the EcoFlow App.
2. X-Boost is not available when the AC output is turned on in a recharging state (in bypass mode)
and when X-Boost is disabled.
3. X-Boost is not applicable for all electrical appliances; it’s incompatible with appliances with strict
voltage requirements. Appliances with voltage protection (such as precise instruments) are not
supported. X-Boost mode is more suitable for heating devices. Please conduct your own tests with
your devices with X-Boost enabled.
3.8 X-Boost
The product supports EPS. When you connect the grid power to the AC Input Port of the product
through an AC Charging cable, you can power electrical devices through the AC Output Sockets (AC
power will come from the grid and not the power station in this situation). In case of a sudden blackout,
the product can automatically switch to the battery powered supply mode within 30ms. As a basic
UPS function, this function does not support 0ms switching. Please do not connect the product to
any device that requires 0ms UPS, such as data servers and workstations. Please test and confirm
the compatibility before using the product. We recommend that you only charge one device at a
time and avoid using multiple ones at the same time to avoid overload protection. EcoFlow takes no
responsibilities for any device failures or data losses caused by failures to follow instructions.
3.9 Emergency Power Supply (EPS)
9
3.10 Uninstall the Extra Battery Module
1. Make sure that the RIVER Max is turned off. Locate the four screws on the bottom cover.
Note: Please pay attention to prevent the buildup of static electricity during the installation
process.
2. Unscrew the four long screws and remove the bottom cover. Take out the extra battery module.
3. Close the bottom cover. Take the four short screws from the RIVER Max Kit and screw them
securely into place.
Long screws
Short screws
Bottom Cover
10
1. What battery does the product use?
It uses high-quality lithium-ion battery.
2. What devices can the product’s AC output port power?
With 600W rated power and 1200W peak power, the product’s AC output port can power
most household appliances. Before you use it, we recommend that you confirm the power of the
appliances first and ensure the power sum of all loaded appliances is lower than the rated power.
3. How long can the product charge my devices?
The charging time is shown on the product’s LCD Screen, which can be used to estimate the
charging time of most appliances with stable power usage.
4. How can I know if the product is charging?
When it’s charging, the remaining charging time will be shown on the LCD Screen. Meanwhile, the
charging indicator icon begins to rotate with the remaining battery percentage and the input
power shown on the right of the circle.
5. How to clean the product?
Please gently wipe it with a dry, soft, clean cloth or paper towel.
6. How to store the product?
Before storing, please turn off the product first, and then store it in a dry, ventilated place at room
temperature. Do not place it near water sources. For long-term storage, please discharge the
battery to 30% and recharge it to 60% every three months to extend its battery life.
7. Can I bring the product on a plane?
No.
4. FAQs
11
5. Troubleshooting
If the Alarm Prompt shows on the product LCD screen during use and does not disappear after a
restart, please stop using it immediately (do not try to charge or discharge).
If you require any other assitance, please contact EcoFlow Customer Service.
Indicator Problem
Charging can be resumed
automatically after the battery cools
down.
The power supply can be resumed
automatically after the battery cools
down.
Charging can be resumed
automatically after battery
temperature rises above 5°C(41°F).
The power supply can be resumed
automatically after the battery
temperature rises above -12°C(10°F).
Please confirm whether the fan inlet
and outlet are blocked, if not, normal
operation will be resumed automatically
after the product temperature drops.
Normal operation will be resumed
automatically after the product is
used at optimum environmental
temperatures.
Please check if the fan is blocked by
foreign materials.
After the product cools down,
it will resume normal operation
automatically.
Contact EcoFlow Customer Service
Normal operation will be resumed
automatically after you remove the
overloaded device and restart the
product.
Electrical appliances should be used
within rated power.
(Refer to X-Boost instructions to get
more details about power limitations).
Solution
The product will resume normal
operation automatically after you
remove the device connected to the car
charger.
Icons Flash
together
Icons Flash
together
Icons Flash
together
Icons Flash
together
Icons Flash
together
Icons Flash
together
Icons Flash
together
Icons Flash
together
Icons Flash
together
Icons Flash
together
Icon Stays On
High Temperature
Charge Protection
High Temperature
Discharge Protection
Low Temperature
Charge Protection
Low Temperature
Discharge Protection
AC Output
Overload Protection
AC High
Temperature Protection
AC Low
Temperature Protection
Fan Blockage
Car Charger
Overload Protection
Car Charger High
Temperature Protection
Battery Failure
Icon Flashes
Overload Discharging
Protection
Battery Exclamation and
OVERLOAD icons flash together.
Disconnect all appliances, restart
the RIVER Max, and add each
appliance back in in turn. Please
note that electrical appliances must
be operated within rated power.
12
1. Ideally, use and store the product between 20°C to 30°C(68°F to 86°F), and always keep it away
from water, intense heat, and sharp objects. Do not store in temperatures above 45°C(11F) or
below -10°C(1F) for an extended period.
2. Storing a battery with a low charge for a long period shortens its lifespan. This product mitigates
the damage by putting the battery into hibernation mode. To get the most out of the battery, make
sure it is about 60% before putting this product into long-term storage, and then once every three
months, discharge the battery to 30% and recharge it back to 60%.
6. What’s In the Box
7. Storage & Maintenance
EcoFlow RIVER Max
User Manual and War-
ranty Card
DC5521-DC5525
Cable
AC Charging Cable (1.5m) Car Charging Cable
(1.5m)
Solar Charging Cable
(MC4 to XT60 Input)
EcoFlow RIVER Max Benutzerhandbuch
EcoFlow RIVER Max nachfolgend als RIVER Max bezeichnet
Lesen Sie alle Sicherheits- und Warnhinweise, Nutzungsbedingungen und Haftungsausschlüsse
sorgfältig durch. Lesen Sie vor der Verwendung die Nutzungsbedingungen und den
Haftungsausschluss unter https://ecoflow.com/pages/terms-of-use sowie die Aufkleber auf
dem Produkt. Benutzer übernehmen die volle Verantwortung für Verwendung und Betrieb des
Produkts. Machen Sie sich mit den entsprechenden Vorschriften in Ihrem Land vertraut. Sie
sind allein dafür verantwortlich, alle relevanten Vorschriften zu kennen und EcoFlow-Produkte
gemäß diesen Vorschriften zu verwenden.
HAFTUNGSAUSSCHLUSS
1
3
4
4
6
6
7
7
8
8
9
10
11
12
12
3.1 Produktdetails
3.2 LCD-Anzeige
3.3 Allgemeine Betriebsanweisungen
3.4 AC-Ladung
3.5 Solarladung
3.6 Kfz-Ladung
3.7 App
3.8 X-Boost
3.9 Notstromversorgung
3.10
Deinstallieren des zusätzlichen Akkumoduls
1.
2. Sicherheitshinweise
3. Erste Schritte
4. FAQ-Bereich
5. Fehlerbehebung
6. Lieferumfang
7. Lagerung und Wartung
INHALT
Spezifikationen
2
2
2.1 Verwendung
2.2 Sachgemäße Entsorgung
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132

EcoFlow 576 Wh River Max Portable Power Station Manuale utente

Tipo
Manuale utente