EcoFlow Delta Manuale utente

Tipo
Manuale utente
EcoFlow DELTA User Manual
SOLAR CHARGE
X-STREAM
CHARGE
OVERLOAD
PROTECTION
20A Max
EcoFlow DELTA (Hereinafter referred to as DELTA)
Read all safety tips, warning messages, terms of use, and disclaimers carefully. Refer to the
terms of use and disclaimer at https://ecoflow.com/pages/terms-of-use and stickers on
the product before use. Users take full responsibility for all usage and operations. Familiarize
yourself with the related regulations in your area. You are solely responsible for being aware
of all relevant regulations and using EcoFlow products in a way that is compliant.
DISCLAIMER
1
4
5
5
7
7
9
9
10
11
12
12
3.1 Product Details
3.2 LCD Screen
3.3 General Product Usage
3.4 AC Charging
3.5 Solar Charging
3.6 Car Charging
3.7 Emergency Power Supply (EPS)`
1.
2.
3. Getting Started
4. FAQs
5. Troubleshooting
6. What’s In the Box
7. Storage & Maintenance
CONTENTS
Specifications
Safety Instructions
2
3
2.1 Usage
2.2 Disposal Guide
1
1. Specifications
Input Ports
AC Charge
AC Input Voltage
Solar Charger
Car Charger
X-Stream Fast Charge 1200W Max, 10A
220-240V~ 50Hz/60Hz
10-65V 10A, 400W Max
Supports 12V/24V Battery, 8A
USB-A (x2)
USB-A Fast Charge (x2)
USB-C (x2)
Car Charger
5V 2.4A 12W Max, per port
5V 2.4A 9V 2A 12V 1.5A 18W Max, per port
5/9/12/15/20V 3A 60W Max, per port
13.6V 8A, 108.8W Max
General Info
Output Ports
Net Weight
Dimensions
Capacity
Approximately 30,9lbs (14kg)
15,7 x 8,3 x 10,6in (39,9 x 21,1 x 26,9cm)
1260Wh 50.4V
Battery Info
Environmental Operating Temperature
Cell Chemistry
Cycle Life
NCM
800 cycles to 80%+ capacity
AC (x4) Pure Sine Wave, 1800W total (surge 3300W),
230V~ (50Hz/60Hz)
Optimal Operating Temperature
Discharge Temperature
Charge Temperature
Storage Temperature
* Whether the product can be charged or discharged depends on the actual temperature of the battery pack.
68°F to 8F(20°C to 3C)
-4°F to 113°F (-20°C to 45°C)
32°F to 11F(0°C to 45°C)
-4°F to 113°F (-20°C to 45°C)
(optimal: 68°F to 86°F (20°C to 30°C))
Protection
Over Voltage Protection, Overload Protection, Over
Temperature Protection, Short Circuit Protection,
Low Temperature Protection, Low Voltage Protection,
Overcurrent Protection
2
2. Safety Instructions
2.1 Usage
1. Do not use the product near a heat source, such as a fire source or a heating furnace.
2. Avoid contact with any liquid. Do not immerse the product in water or get it wet. Do not use the
product in rain or humid environments.
3. Do not use the product in an environment with strong static electricity/magnetic fields.
4. Do not disassemble the product in any way or pierce the product with sharp objects.
5. Avoid using wires or other metal objects that may result in a short circuit.
6. Do not use unofficial components or accessories. If you need to replace any components or
accessories, please visit official EcoFlow channels to check relevant information.
7. When using the product, please strictly follow the operating environment temperature specified in
this user manual. If the temperature is too high, it may result in a fire or explosion; if the temperature
is too low, the product performance may be severely reduced, or the product may cease to work.
8. Do not stack any heavy objects on the product.
9. Do not lock the fan forcibly during use or place the product in an unventilated or dusty area.
10. Please avoid impact, falls, or severe vibrations when using the product. In case of a severe external
impact, turn off the power supply immediately and stop using the product. Ensure the product is
well fastened during transportation to avoid vibrations and impacts.
11. If you accidentally drop the product into water during use, please place it in a safe open area, and
stay away from it until it is completely dry. The dried product should not be used again, and should
be properly disposed of according to Section 2.2 below. If the product catches fire, we recommend
that you use the fire extinguishers in the following order: water or water mist, sand, fire blanket, dry
powder, and finally a carbon dioxide fire extinguisher.
12. Use a dry cloth to clean off dirt on the product ports.
13. Rest the product on a flat surface to avoid damages caused by the product falling over. If the
product is overturned and severely damaged, turn it off immediately, place the battery in an open
area, keep it away from combustible matter and people, and dispose of it in accordance with local
laws and regulations.
14. Ensure that the product is kept out of reach of children and pets.
15. Store the product in a dry and ventilated place.
16. It is recommended to use moisture barrier bags in wet environments (for example, places by the
sea or waterways) to prevent the product from getting soaked. If water is found inside the product,
it must not be used or turned on again. Please take anti-eletric shock measures before touching
the product. Following this, place the product in a safe, waterproof and open area. Once complete
contact EcoFlow Customer Service immediately.
3
2.2 Disposal Guide
1. If conditions permit, make sure that the battery is fully discharged before disposing it in a designated
battery recycling bin. The product contains batteries with potentially dangerous chemicals, so it is
strictly prohibited to dispose of it in ordinary trash cans. For more details, please follow the local laws
and regulations on battery recycling and disposal.
2. If the battery cannot be fully discharged due to a product failure, please do not dispose of the
battery directly in the battery recycling box. In such case, you should contact a professional battery
recycling company for further processing.
3. Please dispose of over-discharged batteries that cannot be recharged.
17. This product is not recommended for powering medical emergency equipment related to personal
safety, including but not limited to medical grade ventilators (hospital version CPAP: Continuous
Positive Airway Pressure), artificial lungs (ECMO, Extracorporeal Membrane Please follow your
doctor's instructions and consult with the manufacturer for restrictions on the use of the equipment.
If used for general medical equipment, please be sure to monitor the power status to ensure that
the power does not run out.
18. When in use, power supply products will generate electromagnetic fields, which are likely to affect
the normal operation of medical implants or personal medical equipment such as pacemakers,
cochlear implants, hearing aids, defibrillators etc. If these types of medical equipment are being
used, please contact the manufacturer to inquire about any restrictions on the use of such
equipment. These measure are fundamental to ensure a safe distance between the medical implants
(for example, pacemakers, cochlear implants, hearing aids, defibrillators etc.) and this product while
in use.
19.When the power supply is connected in normal mode to a refrigerator, power fluctuations may
cause the power supply to automatically shut down. When connecting the power supply to a
refrigerator that stores medicine, vaccines or other valuable items, it is recommended to set the AC
output to "Always on" in the app. This helps support a continuous power supply and ensures a safe
and efficent power consumption state.
4
LCD Screen
Solar/Car Charging
Input Port
AC Output Sockets
AC Power Button
Car Outlet
USB-A Output Port USB-A Fast Charge
Output Port
X-Stream AC Charging Input Port
USB-C Output Port
DC Power Button
Overload Protection
Switch
Main Power Button
3.1 Product Details
3. Getting Started
AU Version
International Version
Note: The above figure shows the different types of sockets in different countries. It is for reference
only, please refer to the actual product.
5
3.2 LCD Screen
3.3 General Product Usage
Short Press to Turn On Long Press to Turn Off
Remaining Charge/
Discharge Time
Overload Warning
Fan Indicator
Low Temperature Warning
High Temperature Warning
Remaining Battery Percentage
Battery Failure Warning
Battery Level Indicator
AC Output
Car Output Indicator
USB-A Output
USB-C Output
Output Power
Input Power
Battery Level Indicator: The indicator will repeatedly fill while charging. If product is at 0% charge, the
indicator will flash to warn you.
* See Section 5 for more troubleshooting steps.
Short press the Main Power Button to turn on the product; the LCD Screen will light up and the
battery level indicator icon will display.
Product On, Product Off, LCD Screen On
The product enters sleep mode after 5 minutes of idle operation; the LCD Screen will automatically
turn off. When the product senses any load change or operations, the LCD Screen will automatically
light up. To turn the LCD Screen on or off, please short press the Main Power Button.
To power off the product, press and hold the Main Power Button.
The default product standby time is 30 mins. With other Power Buttons turned off and no other load
access for 30 mins, the product will automatically shut down.
6
With the Main Power Button turned on, short press the
DC Power Button to use the DC Output Port. Short press
the DC Power Button again to turn it off.
With the DC Power Button on, the product will not
automatically shut down.
DC Output Port
With the Main Power Button turned on, short press the
AC Power Button to use the AC Output ports. Short press
the AC Power Button again to turn it off.
The default standby time of the AC Output port is 12 hours.
Without any load access for 12 hours, the AC Power Button
will automatically turn off.
Please turn off AC power button when not in use to save
power consumption.
AC Output Port
Short Press
DC Power Button
Short Press
AC Power Button
7
X-Stream Fast Charging
1200W Max input Power
<2 hrs Full Charge
3.4 AC Charging
Users can connect solar panels in series as shown in the figure to recharge the product.
When using an EcoFlow solar panel to charge the product, please follow the instructions that come with
the solar panel.Before connecting the solar panel, please ensure that the solar panel’s output voltage is
with in 65V to avoid product damages.
*Solar charging cable (MC4-XT60 adapter cable) is supplied separately.
3.5 Solar Charging
AC Charging Cable
EcoFlow’s X-Stream fast charge technology is specifically for AC charging, offering 1200W of max
input power. In case of unusual situations where the AC input current remains higher than 20A, the
X-Stream charging input port will initiate a self-protection function, and the Overload Protection
Switch on the product will automatically pop up. After confirming that there is no product failure,
you can press the Overload Protection Switch to resume charging.
MC4
Solar Charging Cable
8
Solar MC4 parallel connection cable
* Users have to buy the solar panels and other
parallel connection accessories seperately.
XT60 Connector
SOLAR PANEL-21.6V X6
Wiring solar panels in series adds up the voltage, but the amperage remains the same. Conversely,
when solar panels are wired in parallel, the amperage of panels increases and the voltage remains the
same. User can choose the solar charging mode according the solar input voltage range of charged
power station.
If choosing parallel connection, users can connect up to 2 sets of solar panels in parallel as shown in
the figure to recharge the product. You can divide your solar panels into sets, followed by connecting
each set of solar panels in series and then putting all sets of solar panels in parallel. The parallel
connection cable is an optional accessory and needs to be purchased separately.
9
3.6 Car Charging
Car Charging Cable
Users can recharge the product through the Car Charging Input Port. It supports 12V/24V car
chargers and an 8A default charging current.
Please charge using the car charger after youve started the car to avoid failure to start due to
insufficient car battery. In addition, please make sure that Car Charging Input Port and the Car
Charging Cable are in good condition. EcoFlow takes no responsibilities for any losses or damages
caused by failures to follow instructions.
The product supports EPS. When you connect the grid power to the AC Input Port of the product
through an AC Charging cable, you can power electrical devices through the AC Output Sockets (AC
power will come from the grid and not the power station in this situation). In case of a sudden blackout,
the product can automatically switch to the battery powered supply mode within 30ms. As a basic
UPS function, this function does not support 0ms switching. Please do not connect the product to
any device that requires 0ms UPS, such as data servers and workstations. Please test and confirm
the compatibility before using the product. We recommend that you only charge one device at a
time and avoid using multiple ones at the same time to avoid overload protection. EcoFlow takes no
responsibilities for any device failures or data losses caused by failures to follow instructions.
3.7 Emergency Power Supply (EPS)
10
1. What battery does the product use?
It uses high-quality lithium-ion battery.
2. What devices can the product’s AC output port power?
With 1800W rated power and 3300W peak power, the product’s AC output port can power
most household appliances. Before you use it, we recommend that you confirm the power of the
appliances first and ensure the power sum of all loaded appliances is lower than the rated power.
3. How long can the product charge my devices?
The charging time is shown on the product’s LCD Screen, which can be used to estimate the
charging time of most appliances with stable power usage.
4. How can I know if the product is charging?
When it’s charging, the remaining charging time will be shown on the LCD Screen. Meanwhile, the
charging indicator icon begins to rotate with the remaining battery percentage and the input
power shown on the right of the circle.
5. How to clean the product?
Please gently wipe it with a dry, soft, clean cloth or paper towel.
6. How to store the product?
Before storing, please turn off the product first, and then store it in a dry, ventilated place at room
temperature. Do not place it near water sources. For long-term storage, please discharge the
battery to 30% and recharge it to 60% every three months to extend its battery life.
7. Can I bring the product on a plane?
No.
4. FAQs
11
5. Troubleshooting
If the Alarm Prompt shows on the product LCD screen during use and does not disappear after a
restart, please stop using it immediately (do not try to charge or discharge).
If you require any other assitance, please contact EcoFlow Customer Service.
Indicator Problem
Resume normal operation by
removing the electrical device
connected to the USB-A port.
Resume normal operation by
removing the electrical device
connected to the USB-C port.
After the product cools down,
it will resume normal operation
automatically.
Charging can be resumed
automatically after the battery cools
down.
The power supply can be resumed
automatically after the battery cools
down.
Charging can be resumed
automatically after battery
temperature rises above 41°F(5°C).
The power supply can be resumed
automatically after the battery
temperature rises above 10°F(-12°C).
Please confirm whether the fan inlet
and outlet are blocked, if not, normal
operation will be resumed automatically
after the product temperature drops.
Normal operation will be resumed
automatically after the product is
used at optimum environmental
temperatures.
Please check if the fan is blocked by
foreign materials.
After the product cools down,
it will resume normal operation
automatically.
Contact EcoFlow Customer Service
Normal operation will be resumed
automatically after you remove the
overloaded device and restart the
product.
Electrical appliances should be used
within rated power.
(Refer to X-Boost instructions to get
more details about power limitations).
Solution
The product will resume normal
operation automatically after you
remove the device connected to the car
charger.
USB-A Overload
Protection
Icons Flash
together
Icons Flash
together
Icons Flash
together
Icons Flash
together
Icons Flash
together
Icons Flash
together
Icons Flash
together
Icons Flash
together
Icons Flash
together
Icons Flash
together
Icons Flash
together
Icons Flash
together
Icon Stays On
USB-C Overload
Protection
Product Overload
High Temperature
Charge Protection
High Temperature
Discharge Protection
Low Temperature
Charge Protection
Low Temperature
Discharge Protection
AC Output
Overload Protection
AC High
Temperature Protection
AC Low
Temperature Protection
Fan Blockage
Car Charger
Overload Protection
Car Charger High
Temperature Protection
Battery Failure
Icon Flashes
12
1. Please use or store the product in an environment temperature between 68°F to 86°F(20°C to
30°C), away from water, heat, and other metal objects.
2. For long-term storage, please discharge the battery to 30% and recharge it to 60% every three months.
3. For safety, please do not store the product in an environment temperature higher than 113°F(45°C)
or lower than 14°F(-10°C) for a long time.
4. If the remaining battery is less than 1% after you finish using the product, please recharge it to
60% before storing. If the product is left idle for a long time with severely low battery, irreversible
damages may be caused to the battery cell and the product service life will be shortened.
5. If the product has been idle for too long and the battery is severely low, it will enter a deep sleep
protection mode. In such case, please charge the product before using it again.
6. What’s In the Box
7. Storage & Maintenance
DELTA DELTA Bag Car Charging CableAC Charging Cable
User Manual &
Warranty Card
SOLAR CHARGE
X-STREAM
CHARGE
OVERLOAD
PROTECTION
20A Max
EcoFlowDELTA Benutzerhandbuch
SOLAR CHARGE
X-STREAM
CHARGE
OVERLOAD
PROTECTION
20A Max
EcoFlowDELTA (nachfolgend als DELTA bezeichnet)
Lesen Sie alle Sicherheits- und Warnhinweise, Nutzungsbedingungen und Haftungsausschlüsse
sorgfältig durch. Lesen Sie vor der Verwendung die Nutzungsbedingungen und den
Haftungsausschluss unter https://ecoflow.com/pages/terms-of-use sowie die Aufkleber auf
dem Produkt. Benutzer übernehmen die volle Verantwortung für Verwendung und Betrieb des
Produkts. Machen Sie sich mit den entsprechenden Vorschriften in Ihrem Land vertraut. Sie
sind allein dafür verantwortlich, alle relevanten Vorschriften zu kennen und EcoFlow-Produkte
gemäß dieser Vorschriften zu verwenden.
HAFTUNGSAUSSCHLUSS
1
3.1 Produktdetails
3.2 LCD-Anzeige
3.3 Allgemeine Betriebsanweisungen
3.4 AC-Ladung
3.5 Solarladung
3.6 Kfz-Ladung
3.7 Notstromversorgung
1.
2. Sicherheitshinweise
3. Erste Schritte
4. FAQ-Bereich
5. Fehlerbehebung
6. Lieferumfang
7. Lagerung und Wartung
INHALT
Spezifikationen
2
3
2.1 Verwendung
2.2 Sachgemäße Entsorgung
4
5
5
7
7
9
9
10
11
12
12
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130

EcoFlow Delta Manuale utente

Tipo
Manuale utente