ColorKey CKU-7010 Manuale utente

CKU-7010
ColorKey
Marca
ColorKey
Modello
CKU-7010
Tipo
Manuale utente
SKU: CKU-7010
USER MANUAL
2
Table of Contents
CONTENTS OF PACKAGE ..................................................................................................................................... 3
SAFETY .................................................................................................................................................................... 3
SERVICE & SUPPORT ............................................................................................................................................ 3
INTRODUCTION ....................................................................................................................................................... 4
POWER & CHARGING ............................................................................................................................................ 5
DISPLAY & OPERATION ........................................................................................................................................ 6
SETUP EXAMPLES ................................................................................................................................................. 8
TROUBLESHOOTING ........................................................................................................................................... 11
TECHNICAL INFORMATION ................................................................................................................................ 12
Please read these instructions carefully before use. Operating this fixture according to
these instructions is important to avoid any possible damage or accidents caused by
misuse.
3
Contents of Package
• AirHub DMX
• Power Supply
• User Manual
Safety
Caution! Opening this unit voids warranty. Contact ColorKey for any service requests.
Warning! To avoid electrical shock, be sure to disconnect power before any service or when
moving or setting up the fixture.
Caution! Avoid direct eye exposure with the fixture when on.
• This fixture is for indoor use only.
• This fixture must be installed a minimum distance of 5 meters (16’4”) away from any
lighted objects.
• Do not install or operate this fixture near flammable materials.
• This device must be installed, operated, and maintained by a qualified professional.
• Please check if the voltage is in accordance with the rated power before installing.
• Do not operate this fixture if the power cord has been damaged. Turn off fixture and
replace with a power cord of similar rating.
Service & Support
Your ColorKey product includes a 2-year warranty. For technical support or to register your
product, please visit https://www.colorkeyled.com/support/
You can also reach us by phone Monday thru Friday, 8:30am – 5pm PST at (818) 578-4030.
4
Introduction
Thank you for purchasing the ColorKey AirHub DMX!
The AirHub is a battery powered Wi-DMX transceiver that provides instant wireless
connectivity across the range of ColorKey Air Series lights. The AirHub features 16 wireless
groups (00-15) and built-in presets including static colors, auto, fade, and sound active
mode.
It’s now easier than ever to fill a room with color by simply setting all the fixtures to the same
wireless group ID and watching them automatically connect and synchronize.
The ColorKey Air Series ecosystem includes:
- AirPar HEX 4 4x12W RGBAW+UV par light
- AirBar HEX 6 6x12W RGBAW+UV bar
- AirPar COB QUAD 30W RGBW Chip-on-Board par light
- AirPad QUAD 15W RGBW centerpiece
More models will be introduced in the future.
AIRHUB
DMX
ESC DOWN UP ENTER
AIRHUB DMX
ESC DOWN UP ENTER
IR
AIRPAR COB
QUAD
ESC DOWN UP ENTER
AIRPAR HEX 4
AIRBAR HEX 6
AIRPAD
QUAD
5
Power & Charging
The AirHub DMX features a rechargeable lithium-ion battery for cable free use. The battery
can power the hub for up to 20 hours from a full charge. An adaptive power supply with an
input voltage range of 100 to 240 VAC 50/60Hz is also included.
The battery charges whenever the included power adapter is connected and plugged into a
power source. The AirHub can be used while charging. If it is plugged in and not in
operation, make sure it is turned off. The indicators on the LED Menu Display show how
much battery life remains available.
The included power supply features a charging status LED. Red indicates that the battery is
charging and green that charging is complete.
DMX IN DMX OUT
DC 12.6V 1A
Power On / Off
12.6V / 1A Power Supply Input
6
Display & Operation
Menu Page 1
This page displays the current settings of the AirHub. A flashing asterisk (*) indicates
the AirHub DMX is connected and communicating wirelessly.
è ESC: Navigate to the previous higher-level menu item
è Down: Scrolls through the menu items and numbers in descending order
è Up: Scrolls through the menu items and numbers in ascending order
è Enter: Is used to select and confirm/store the current menu selection
Battery Life
Wireless DMX Group ID
DMX Signal Connected
7
Menu Page 2
On this page, you will find the wireless ID, W-DMX, and screen settings.
è To set the wireless group ID, press the Down
button until ID Setup is highlighted. Press Enter
multiple times until you reach your desired ID.
Press Esc to confirm.
è Wireless DMX is on by default. To turn it off,
press the Down button until W-DMX is highlighted.
Press Enter to select, and down to change the
setting. Press Enter to confirm.
è The screen can be set to stay on or turn off after
30 seconds. To change the screen settings, press
the Down button until Screen is highlighted. Press
Enter to select, and down to change the setting.
Press Enter to confirm.
Menu Page 3
On this page you will find the fixture selection and
presets.
è AirHub includes presets for RGBW and
RGBAW-UV lights. To select your fixture type,
press the Down button until Model is highlighted.
Press Enter to select, and down to change the
setting. Press Enter to confirm.
è To set your fixtures to Auto or Fade modes,
press the Down button until Auto or Fade is
highlighted. The fixture will immediately change to
the highlighted mode. To change the speed of the
program, press Enter, then Up or down to change
the speed. Press Enter to confirm.
è To set your fixtures to a static color, press the Down button until Color is highlighted.
The fixture will immediately change to the selected color. To change the color, press
Enter, then Up or Down. Press Enter to confirm.
è To set your fixtures to Sound Active mode, press the Down button until Sound is
highlighted. The fixture will immediately change to the selected color. To change the
color, press Enter, then Up or Down. Press Enter to confirm.
8
Setup Examples
Stand Alone
The AirHub features 16 wireless groups (00-15) and built-in presets including static colors,
auto, fade, and sound active mode. To make a connection, simply set the AirHub and your
Air Series fixtures to the same group ID. In the example below, the AirHub and AirPar HEX 4
are both set to ID01.
AirHub DMX Menu AirPar Hex 4 Menu
The AirHub can also transmit wireless DMX512 to most 2.4Ghz enabled fixtures outside of
the Air Series ecosystem through group ID 1-5 (such as the ColorKey MobilePar Mini HEX
4). Simply scroll through the wireless bands on your lights until a connection is made with
the AirHub.
AIRHUB
DMX
ESC DOWN UP ENTER
AIRHUB DMX
DMX CONTROLLER
AIRPAR
COB QUAD
ESC DOWN UP ENTER
IR
AIRHUB
DMX
ESC DOWN UP ENTER
AIRHUB DMX AIRPAR
COB QUAD
ESC DOWN UP ENTER
IR
DMX CONTROLLER
AIRHUB
DMX
ESC DOWN UP ENTER
AIRHUB DMX
AIRHUB
DMX
ESC DOWN UP ENTER
AIRHUB DMX
AIRPAD
QUAD
ANY DMX FIXTURE
9
DMX Transmitter
The AirHub DMX functions as a DMX transmitter for any standard DMX controller using
standard 3-pin DMX cables. Just like Stand Alone mode, all fixtures connect to the AirHub
using the wireless group ID. In addition, fixtures need to be addressed just as they would
when connected to the controller via DMX cable. Refer to the DMX chart included in your
fixtures’ owner’s manual for details.
DMX Receiver
The AirHub also functions as a DMX receiver when the DMX output of the AirHub is
connected to the DMX input of a lighting fixture. Connect to the wireless transmitter using
the same wireless group ID.
AIRHUB
DMX
ESC DOWN UP ENTER
AIRHUB DMX
DMX CONTROLLER
AIRPAR
COB QUAD
ESC DOWN UP ENTER
IR
AIRHUB
DMX
ESC DOWN UP ENTER
AIRHUB DMX AIRPAR
COB QUAD
ESC DOWN UP ENTER
IR
DMX CONTROLLER
AIRHUB
DMX
ESC DOWN UP ENTER
AIRHUB DMX
AIRHUB
DMX
ESC DOWN UP ENTER
AIRHUB DMX
AIRPAD
QUAD
ANY DMX FIXTURE
10
AirApp For All (iOS Mobile App)
ColorKey AirHub can create a local wireless network for iOS connectivity to “AirApp for All”,
a lighting control app available on iOS devices.
Scan QR code from your iphone or ipad to install “AirApp for All”
Connecting AirHub to AirApp for All:
1. Turn on Air Hub
2. Ensure (App:) menu setting is set to (On), (W-DMX:) menu setting
can be set to (Off)
3. On your iOS mobile device, navigate to your device Settings and
connect to Wi-Fi network AirAppXXXX
4. Password: 1,2,3,4,5,6,7,8
5. Once you have a Wi-fi connection to the AirAppXXXX network,
open AirApp for All
6. Select (LED Uplights) and enjoy quick access to a host of lighting
control options.
AIRHUB
DMX
ESC DOWN UP ENTER
AIRHUB DMX
DMX CONTROLLER
AIRPAR
COB QUAD
ESC DOWN UP ENTER
IR
AIRHUB
DMX
ESC DOWN UP ENTER
AIRHUB DMX AIRPAR
COB QUAD
ESC DOWN UP ENTER
IR
DMX CONTROLLER
AIRHUB
DMX
ESC DOWN UP ENTER
AIRHUB DMX
AIRHUB
DMX
ESC DOWN UP ENTER
AIRHUB DMX
AIRPAD
QUAD
ANY DMX FIXTURE
AirApp for All
AIRHUB
DMX
ESC DOWN UP ENTER
AIRHUB DMX
DMX CONTROLLER
AIRPAR
COB QUAD
ESC DOWN UP ENTER
IR
AIRHUB
DMX
ESC DOWN UP ENTER
AIRHUB DMX AIRPAR
COB QUAD
ESC DOWN UP ENTER
IR
DMX CONTROLLER
AIRHUB
DMX
ESC DOWN UP ENTER
AIRHUB DMX
AIRHUB
DMX
ESC DOWN UP ENTER
AIRHUB DMX
AIRPAD
QUAD
ANY DMX FIXTURE
AIRHUB
DMX
ESC DOWN UP ENTER
AIRHUB DMX
DMX CONTROLLER
AIRPAR
COB QUAD
ESC DOWN UP ENTER
IR
AIRHUB
DMX
ESC DOWN UP ENTER
AIRHUB DMX AIRPAR
COB QUAD
ESC DOWN UP ENTER
IR
DMX CONTROLLER
AIRHUB
DMX
ESC DOWN UP ENTER
AIRHUB DMX
AIRHUB
DMX
ESC DOWN UP ENTER
AIRHUB DMX
AIRPAD
QUAD
ANY DMX FIXTURE
11
Troubleshooting
Problem
Solutions
No DMX control
• Confirm the Wireless Group ID is the same as the
receiving light or hub
• Make sure the receiving fixture is in DMX mode
• Make sure wireless is enabled on your AirHub
• Make sure a DMX cable is properly connected to your
DMX controller
• Make sure that the DMX controller is operational
• Check the DMX cable for tears or breaks
12
Technical Information
• 2.4Ghz Wireless DMX Transmitter and Receiver
• 16 wireless group ID’s
• 15 static color presets
• Auto mode (color chase) with 15 speeds
• Fade mode with 15 speeds
• Sound active mode with sensitivity adjustment
• Control modes: Wi-DMX, DMX 512, Master /Slave, Sound Active
• Lithium-Ion battery (+/-) 20 hours working time, (+/-) 5 hours charge time
• Power Consumption: 11.7W
• Power supply: 12.6V 1A; AC100-240V; 50-60Hz
• Working temperature: up to 40˚C
• Product size: 5.5 x 5.5 x 3.5 in
• Net Weight: 1.6 lbs
Please note: As we continue to work towards improving our products and your experience
as a user, we recommend that you check our website periodically for updates to user
manuals and specifications at www.ColorKeyLED.com or you may contact us directly at
[email protected].
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

ColorKey CKU-7010 Manuale utente

CKU-7010
ColorKey
Marca
ColorKey
Modello
CKU-7010
Tipo
Manuale utente
Scarica PDF
rapporto

in altre lingue

Altri documenti