Moog Videolarm FusionDome FDW75C12N Installation And Operation Instructions Manual

Marca: Moog Videolarm

Modello: FusionDome FDW75C12N

Categoria: Accessori per telecamere di sicurezza

Tipo: Installation And Operation Instructions Manual

Questo manuale è adatto anche per

www.videolarm.com

F D W 7 5 C 1 2 N

FusionDome™ (Outdoor Wall Mount with Housing)

Installation and Operation Instructions for the following models:

FDW75C12N IP Network Ready 7” Outdoor dome housing with wall mount, clear dome, with

12Vdc input, heater/blower, fan an IP Network PTZ camera.

FDP75C12N IP Network Ready 7” Outdoor dome housing with pendant mount, clear dome, with

12Vdc input, heater/blower, fan an IP Network PTZ camera.

W81-IN5329

05-08-2012

Before attempting to connect or operate this product, please read these instructions completely.

To be used with the 81-IN5481 Instruction Manual.

IMPORTANT SAFEGUARDS SAFETY PRECAUTIONS

UNPACKING

SERVICE

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with damp cloth.

7 Do not block any of the ventilation openings. Install in accordance with the

manufacturers instructions.

8 Cable Runs- All cable runs must be within permissible distance.

9 Mounting - This unit must be properly and securely mounted to a supporting

structure capable of sustaining the weight of the unit.

Accordingly:

a. The installation should be made by a qualied installer.

b. The installation should be in compliance with local codes.

c. Care should be exercised to select suitable hardware to install the unit, taking into

account both the composition of the mounting surface and the weight of the unit.

10 Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus ( including ampliers) that produce heat.

11 Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding type

plug has two blades and a third grounding prong. The wide blade or the third

prong are provided for your safety. When the provided plug does not t into your

outlet, consult an electrician for replacement of the obsolete outlet.

12 Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

13 Only use attachment/ accessories specied by the manufacturer.

14 Use only with a cart, stand, tripod, bracket, or table specied by the manufacturer,

or sold with the apparatus. When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

15 Unplug this apparatus during lighting storms or when unused for long periods of time.

16 Refer all servicing to qualied service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled of objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or

has been dropped.

Be sure to periodically examine the unit and the supporting structure to make sure that the integrity

of the installation is intact. Failure to comply with the foregoing could result in the unit separating

from the support structure and falling, with resultant damages or injury to anyone or anything struck

by the falling unit.

Unpack carefully. Electronic components can be

damaged if improperly handled or dropped. If an item

appears to have been damaged in shipment, replace

it properly in its carton and notify the shipper.

Be sure to save:

1 The shipping carton and packaging material.

They are the safest material in which to make future

shipments of the equipment.

2 These Installation and Operating Instructions.

If technical support or service is needed, contact us at

the following number:

The lightning ash with an arrowhead symbol,

within an equilateral triangle, is intended to

alert the user to the presence of non-insulated

“dangerous voltage” within the product’s

enclosure that may be of sufcient magnitude

to constitute a risk to persons.

Este símbolo se piensa para alertar al usuario a la presencia

del “voltaje peligroso no-aisIado” dentro del recinto de los

productos que puede ser un riesgo de choque eléctrico.

Ce symbole est prévu pour alerter I’utilisateur à la presence

“de la tension dangereuse” non-isolée dans la clôture de

produits qui peut être un risque de choc électrique.

Dieses Symbol soll den Benutzer zum Vorhandensein der

nicht-lsolier “Gefährdungsspannung” innerhalb der

Produkteinschließung alarmieren die eine Gefahr des

elektrischen Schlages sein kann.

Este símbolo é pretendido alertar o usuário à presença “di

tensão perigosa non-isolada” dentro do cerco dos produtos

que pode ser um risco de choque elétrico.

Questo simbolo è inteso per avvertire I’utente alla presenza

“di tensione pericolosa” non-isolata all’interno della

recinzione dei prodotti che può essere un rischio di scossa

elettrica

The exclamation point within an equilateral

triangle is intended to alert the user to

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

Este símbolo del punto del exclamation se piensa para

alertar al usuario a la presencia de instrucciones importantes

en la literatura que acompaña la aplicación.

Ce symbole de point d’exclamation est prévu pour alerter

l’utilisateur à la presence des instructions importantes dans

la littérature accompagnant l’appareil.

Dieses Ausruf Punktsymbol soll den Benutzer zum

Vorhandensein de wichtigen Anweisungen in der Literatur

alarmieren, die das Gerät begleitet.

Este símbolo do ponto do exclamation é pretendido alertar o

usuário à presença de instruções importantes na literatura

que acompanha o dispositivo.

Questo simbolo del punto del exclamaton è inteso per

avvertire l’utente alla presenza delle istruzioni importanti nella

letteratura che accompagna l'apparecchio.

TECHNICAL SUPPORT

AVAILABLE 24 HOURS

1- 800 - 554 -1124

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER ( OR BACK). NO USER- SERVICE-

ABLE PARTS INSIDE. REFER SEVICING

TO QUALIFIED SERVICE PERSONNEL.

Limited Warranty for Moog Videolarm Products

Moog Videolarm warrants these products to be free from defects in material or workmanship as follows:

PRODUCT CATEGORY PARTS \ LABOR

All Enclosures and Electronics* Five (5) Years

Poles/PolEvators™/CamEvator Three (3) Years

Warrior Series™/Q-View™/IR Illuminators Five (5) Years

SView Series™ Five (5) Years **6 months if used in auto scan/tour operation

Controllers Five (5) Years

Power Supplies Five (5) Years

EcoKit Three (3) Years

Accessory Brackets Five (5) Years

Liberty Dome Three (3) Years

*DeputyDome™, NiteTrac™, Igloo Dome, PurgeDome™ Three (3) Years **6 months if used in auto scan/tour operation

During the labor warranty period, to repair the Product, Purchaser will either return the defective product, freight prepaid, or deliver it to Moog Videolarm

Inc. Decatur GA. The Product to be repaired is to be returned in either its original carton or a similar package affording an equal degree of protection with

a RMA # (Return Materials Authorization number) displayed on the outer box or packing slip. To obtain a RMA# you must contact our Technical Support

Team at 800.554.1124, extension 101. Moog Videolarm will return the repaired Product freight prepaid to Purchaser. Moog Videolarm is not obligated to

provide Purchaser with a substitute unit during the warranty period or at any time. After the applicable warranty period, Purchaser must pay all labor and/or

parts charges.

The limited warranty stated in these product instructions is subject to all of the following terms and conditions.

TERMS AND CONDITIONS

1. NOTIFICATION OF CLAIMS: WARRANTY SERVICE: If Purchaser believes that the Product is defective in material or workmanship, then written notice with an

explanation of the claim shall be given promptly by Purchaser to Moog Videolarm. All claims for warranty service must be made within the warranty period.

If after investigation Moog Videolarm determines the reported problem was not covered by the warranty, Purchaser shall pay Moog Videolarm for the cost of

investigating the problem at its then prevailing per incident billable rate. No repair or replacement of any Product or part thereof shall extend the warranty period

of the entire Product. The speci c warranty on the repaired part only shall be in effect for a period of ninety (90) days following the repair or replacement of that

part or the remaining period of the Product parts warranty, whichever is greater.

2. EXCLUSIVE REMEDY: ACCEPTANCE: Purchaser’s exclusive remedy and Moog Videolarm’s sole obligation is to supply (or pay for) all labor necessary to repair any

Product found to be defective within the warranty period and to supply, at no extra charge, new or rebuilt replacements for defective parts.

3. EXCEPTIONS TO LIMITED WARRANTY: Moog Videolarm shall have no liability or obligation to Purchaser with respect to any Product requiring service during the

warranty period which is subjected to any of the following: abuse, improper use, negligence, accident, lightning damage or other acts of God (i.e., hurricanes,

earthquakes), modi cation, failure of the end-user to follow the directions outlined in the product instructions, failure of the end-user to follow the maintenance

procedures recommended by the International Security Industry Organization, written in product instructions, or recommended in the service manual for the

Product. Furthermore, Moog Videolarm shall have no liability where a schedule is speci ed for regular replacement or maintenance or cleaning of certain parts

(based on usage) and the end-user has failed to follow such schedule; attempted repair by non-quali ed personnel; operation of the Product outside of the

published environmental and electrical parameters, or if such Product’s original identi cation (trademark, serial number) markings have been defaced, altered,

or removed. Moog Videolarm excludes from warranty coverage Products sold AS IS and/or WITH ALL FAULTS and excludes used Products which have not

been sold by Moog Videolarm to the Purchaser. All software and accompanying documentation furnished with, or as part of the Product is furnished “AS IS”

(i.e., without any warranty of any kind), except where expressly provided otherwise in any documentation or license agreement furnished with the Product. Any

cost associated with removal of defective product and installation of replacement product is not included in this warranty.

4. PROOF OF PURCHASE: The Purchaser’s dated bill of sale must be retained as evidence of the date of purchase and to establish warranty eligibility.

DISCLAIMER OF WARRANTY

EXCEPT FOR THE FOREGOING WARRANTIES, Moog Videolarm HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING, BUT NOT LIMITED TO ANY AND/OR ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND/OR

ANY WARRANTY WITH REGARD TO ANY CLAIM OF INFRINGEMENT THAT MAY BE PROVIDED IN SECTION 2-312(3) OF THE UNIFORM COMMERCIAL

CODE AND/OR IN ANY OTHER COMPARABLE STATE STATUTE. Moog Videolarm HEREBY DISCLAIMS ANY REPRESENTATIONS OR WARRANTY THAT

THE PRODUCT IS COMPATIBLE WITH ANY COMBINATION OF NON-Moog Videolarm PRODUCTS OR NON-Moog Videolarm RECOMMENDED PRODUCTS

PURCHASER MAY CHOOSE TO CONNECT TO THE PRODUCT.

LIMITATION OF LIABILITY

THE LIABILITY OF Moog Videolarm, IF ANY, AND PURCHASER’S SOLE AND EXCLUSIVE REMEDY FOR DAMAGES FOR ANY CLAIM OF ANY KIND

WHATSOEVER, REGARDLESS OF THE LEGAL THEORY AND WHETHER ARISING IN TORT OR CONTRACT, SHALL NOT BE GREATER THAN THE ACTUAL

PURCHASE PRICE OF THE PRODUCT WITH RESPECT TO WHICH SUCH CLAIM IS MADE. IN NO EVENT SHALL Moog Videolarm BE LIABLE TO PURCHASER

FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION,

REIMBURSEMENT OR DAMAGES ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS OR FOR ANY OTHER REASON WHATSOEVER.

FDW75C12N

12VDC

21 Watts

Accessories: Heater: 20 Watts, Blower: 1 Watt

Camera Power: 40 Watts Max

Tools Required: .100” Flat Head Screwdriver

Phillips Head Screwdriver

12VDC

21 vatios

Accesorios: Calentador: 20 Vatios, Soplador: 1 vatio

Energía De la Cámara fotográfica: 40 vatios Max

Las Herramientas Requirieron: Destornillador Principal Plano Del

100". Destornillador Principal Phillips.

12VDC

21 watts

Accessoires : Réchauffeur : 20 Watts, Ventilateur : 1 watt

Puissance D'Appareil-photo : 40 watts Max

Les Outils Ont exigé : Tournevis Principal Plat De 100".

Tournevis Principal Phillips.

12VDC

21 Watt

Zusatzgeräte: Heizung: 20 Watt, Gebläse: 1 Watt.

Kamera-Energie: 40 Watt Max

Werkzeuge Erforderten: 100"Flacher Hauptschraubenzieher.

Kreuzkopfhauptschraubenzieher.

12VDC

21 watts

Acessórios: Calefator: 20 Watts, Ventilador: 1 watt.

Poder Da Câmera: 40 watts Max

Ferramentas Requeridas: Chave de fenda Principal Lisa Do

100". Chave de fenda Principal Phillips.

12VDC.

21 watt

Accessori: Riscaldatore: 20 Watt, Ventilatore: 1 watt.

Alimentazione Della Macchina fotografica: 40 watt Max

Gli Attrezzi Hanno richiesto: Cacciavite Capo Piano Del 100".

Cacciavite Capo "phillips".

Electrical Specifications

Power 12VDC

Class 2 Only

Français

Deutsch

Italiano

Portuguese

Español

English

Contents of Box

* NOT included with E or 12V models

Pendent Model

(ONLY)

Bracket is designed for 45° conduit tting (If using the

conduit). Run wire into bracket, secure to wall.

• El soporte se diseña para la guarnición del conducto 45° (si usa el

conducto). Funcione con el alambre en el soporte seguro para

emparedar.

• La parenthèse est conçue pour l'ajustage de précision du conduit 45° (si

à l'aide du conduit). Courez le l dans la parenthèse bloquée pour murer.

• Haltewinkel ist für Befestigung des Rohres 45° bestimmt (wenn das Rohr

verwendet wird). Lassen Sie Draht in den Haltewinkel laufen, der, um zu

ummauern sicher ist.

• O suporte é projetado para o encaixe da canalização 45° (se usando a

canalização). Funcione o o no suporte seguro para murar.

• La staffa è progettata per il montaggio del condotto 45° (se per mezzo

del condotto). Faccia funzionare il legare nella staffa sicura per murare.

Trim incoming control & power wires to 4”- 5”,

for either wall or pendent bracket.

• & entrante del control del ajuste; accione los alambres a 4” - 5”, para

la pared o el soporte pendiente.

• & entrant de commande d'équilibre ; actionnez les fils à 4 » - 5 », pour

le mur ou la parenthèse en suspens.

• Ankommendes & Steuer der Ordnung; antreiben Sie Drähte bis 4“ - 5“,

entweder für Wand oder pendent Haltewinkel r.

• & entrante do controle da guarnição; pnha fios a 4” - 5”, para a

parede ou o suporte pendent.

• & ricevuto di controllo della disposizione; alimenti i legare a 4„ - 5„,

per la parete o la staffa pendent.

4”-5”

Secure lanyard to lanyard clip.

• Asegure el acollador al clip del acollador.

• Fixez la lanière à l'agrafe de lanière.

• Befestigen Sie Abzuglinie an Abzuglinieclip.

• Fixe o colhedor ao grampo do colhedor.

• Assicuri la cordicella alla clip della cordicella.

Complete ALL wiring connections.

• Termine TODAS LAS conexiones del cableado.

• Accomplissez TOUS LES raccordements de câblage.

• Schließen Sie ALLE Verdrahtungsanschlüsse ab.

• Termine TODAS AS conexões da fiação.

• Completi TUTTI I collegamenti dei collegamenti.

WALL MOUNTING

3 4

Trim incoming control and power wires to 4-5” for

either wall or pendent bracket.

• Ajuste los alambres entrantes del control y de la energía a

4-5” para la pared o el soporte pendiente.

• Équilibrez les fils entrants de commande et de puissance à 4-5

» pour le mur ou la parenthèse en suspens.

• Trimmen Sie ankommende Steuer- und Energiendrähte bis

4-5“ entweder für Wand oder pendent Haltewinkel.

• Apare fios entrantes do controle e do poder a 4-5” para a

parede ou o suporte pendent.

• Assetti i legare ricevuti di potere e di controllo a 4-5„ per la

parete o la staffa pendent.

4”-5”

Align large arrows.

• Alinee las flechas grandes.

• Alignez les grandes flèches.

• Richten Sie große Pfeile aus.

• Alinhe grandes setas.

• Allini le grandi frecce.

Important

Gasket

Must be in

place

To lock, turn clockwise.

• Para trabarse, dar vuelta a la derecha.

• Pour fermer à clef, tourner dans le sens des aiguilles d'une montre.

• Zu sich verriegeln, nach rechts drehen.

• Para travar, para girar no sentido horário.

• Per per chiudere, girare in senso orario.

Secure with ¼” Allen wrench.

• Asegure con la llave Allen del ¼”.

• Fixez clé Allen avec de ¼ ».

• Sichern Sie mit ¼“ Inbusschlüssel.

• Fixe com chave Allen do ¼ de”.

• Fissi con chiave di Allen del ¼„.

FOR PENDENT/

WALL MOUNTING

5 6

Secure lanyard to lanyard clip.

• Asegure el acollador al clip del acollador.

• Fixez la lanière à l'agrafe de lanière.

• Befestigen Sie Abzuglinie an Abzuglinieclip.

• Fixe o colhedor ao grampo do colhedor.

• Assicuri la cordicella alla clip della cordicella.

Complete all wiring connections

(coax wire not supplied).

• Termine todas las conexiones del cableado

(alambre coaxil no suministrado).

• Accomplissez tous les raccordements de câblage

(fil coaxial non fourni).

• Schließen Sie alle Verdrahtungsanschlüsse ab

(koaxialer Draht nicht geliefert).

• Termine todas as conexões da fiação

(fio co-axial não fornecido).

• Completi tutti i collegamenti dei collegamenti

(legare coassiale non fornito).

Align large arrows.

• Alinee las flechas grandes.

• Alignez les grandes flèches.

• Richten Sie große Pfeile aus.

• Alinhe grandes setas.

• Allini le grandi frecce.

To lock, turn clockwise.

• Para trabarse, dar vuelta a la derecha.

• Pour fermer à clef, tourner dans le sens des aiguilles d'une

montre.

• Zu sich verriegeln, nach rechts drehen.

• Para travar, para girar no sentido horário.

• Per per chiudere, girare in senso orario.

Important

Gasket

Must be in

place

Secure with ¼” Allen wrench.

• Asegure con la llave Allen del ¼”.

• Fixez clé Allen avec de ¼”.

• Sichern Sie mit ¼“ Inbusschlüssel.

• Fixe com chave Allen do ¼ de”.

• Fissi con chiave di Allen del ¼”.

To loosen - unscrew bolts ½” turn counter

clockwise.

• Para aflojar - desatornille a la derecha contrario de la vuelta

del ½ de los pernos”.

• Pour se desserrer - dans le sens des aiguilles d'une montre de

tour dévissez de boulons ½ » contre-.

• Um sich zu lösen - schrauben Sie Schraubbolzen ½“

Umdrehungs-Gegenrechtses herum ab.

• Para afrouxar - desaparafuse sentido horário contrário volta

do ½ dos parafusos da”.

• Per allentare - sviti in senso orario di girata del ½ dei bulloni„

contro.

RJ45

BNC (Not supplied)

12VDC

Camera + 12VDC

Camera - 12VDC

Heater/Blower + 12VDC

Heater/Blower - 12VDC

Red

Orange

Yellow

Green

POWER

Max 40 Watts

21 Watts

(See Camera Specs)

Make the appropriate male and female connections. Indoor model does not include pre-run cables.

• Haga las conexiones masculinas y femeninas apropiadas. El modelo de interior no incluye pre-funciona los cables.

• Établissez les rapports masculins et femelles appropriés. Le modèle d'intérieur n'inclut pas pré-courent des câbles.

• Stellen Sie die passenden männlichen und weiblichen Beziehungen her. Innenmodell schließt nicht vor-laufen lassen Kabel

ein.

• Faça as conexões masculinas e fêmeas apropriadas. O modelo indoor não inclui pre-funciona cabos.

• Faccia i collegamenti maschii e femminili adatti. Il modello dell'interno non include pre-fa funzionare i cavi.

Make the appropriate male and female connections.

Indoor model does not include

pre-run cables.

• Haga las conexiones masculinas y femeninas apropiadas. El modelo

de interior no incluye pre-funciona los cables.

• Établissez les rapports masculins et femelles appropriés. Le modèle

d'intérieur n'inclut pas pré-courent des câbles.

• Stellen Sie die passenden männlichen und weiblichen Beziehungen

her. Innenmodell schließt nicht vor-laufen lassen Kabel ein.

• Faça as conexões masculinas e fêmeas apropriadas. O modelo indoor

não inclui pre-funciona cabos.

• Faccia i collegamenti maschii e femminili adatti. Il modello dell'interno

non include pre-fa funzionare i cavi.

1 Camera Power (+12 VDC) Red

2 Camera Power (-12 VDC) Orange

POWER

AWG

,5 ,75 1,0 1,5 2,5 4 6

22 20 18 16 14 12 10

The beam angle may be adjusted on the

bottom of the unit.

• Éstos se recomiendan las distancias máximas para

12VDC con una gota del voltage del 10%.

• Ceux-ci sont recommandés des distances maximum

pour 12VDC avec une chute de tension de 10%.

• Diese werden maximale Abstände für 12VDC mit

einem 10% Spannungsabfall empfohlen.

• Estes são recomendados distâncias máximas para

12VDC com uma queda de tensão de 10%.

• Questi sono suggeriti distanze massime per 12VDC

con una differenza de potenziale di 10%.

These are recommended maximum distances

for 12VDC with a 10% voltage drop.

Power and Control Inputs (Inside of Housing)

Tab

Loop the lanyard around the tab inside the

housing.

• Coloque el acollador alrededor de la lengüeta

dentro de la cubierta.

• Faites une boucle la lanière autour de l'étiquette à

l'intérieur du logement.

• Schlingen Sie die Abzuglinie um den Vorsprung

innerhalb des Gehäuses.

• Dê laços no colhedor em torno da aba dentro da

carcaça.

• Colleghi la cordicella in circuito intorno alla

linguetta all'interno dell'alloggiamento.

Before

After

Align the arrows on the outside of the dome

and lock.

• Alinee las flechas en el exterior de la bóveda y

trábese.

• Alignez les flèches sur l'extérieur du dôme et

fermez à clef.

• Richten Sie die Pfeile auf der Außenseite der

Haube aus und verriegeln Sie sich.

• Alinhe as setas na parte externa da abóbada e

trave-as.

• Allinei le frecce sulla parte esterna della cupola e

blocchi.

Fasten down the dome with a Phillips

screwdriver.

• Sujete abajo de la bóveda con un destornillador

Phillips.

• Attachez en bas du dôme avec un tournevis

Phillips.

• Befestigen Sie sich hinunter die Haube mit einem

Kreuzkopfschraubenzieher.

• Prenda abaixo a abóbada com uma chave de

fenda Phillips.

• Fissisi giù la cupola con un cacciavite "phillips".

Wipe the dome clean.

• Limpie la bóveda limpia.

• Essuyez le dôme.

• Wischen Sie die Haube sauber ab.

• Limpe a abóbada limpa.

• Asciughi la cupola.

Replacement Parts List

FDW75C12N

PART NUMBER DESCRIPTION

1 FD7C CLEAR REPLACEMENT CAPSULE

1A FD7T TINTED REPLACEMENT CAPSULE

2 RPFD7501 LOWER TRIM RING

3 RPFD703 DOME CLAMPING RING

4 RPNET02 NETWORK HGS POWER SUPPLY

5 RPFD072 24V HEATER

5A RPFD072/12 12V HEATER (12VDC MODELS ONLY)

6 RPFD080 BLOWER

7 RPFD060 CAMERA BRACKET

8 RP70FP7PB CONNECTION PCB(24VAC)

8A RP70FP7PB12 CONNECTION PCB (12VDC)

9 RPFD040 HOUSING TOP

10 RPFD2612 HOUSING TOP GASKET

11 RPFD3245 WALL/PENDENT

ADAPTER

RPGK3356 WALL/PENDENT GASKET

13 RP3458 LANYARD SET

14 RP3551 WM11 WALL MOUNT

15 RP3606 PENDENT MOUNT BRACKET

16 RP3719 1 1/2 FEMALE /FEMALE COUPLING

N/S RPPKH2098 BRACKET PACKET ASSEMBLY

N/S RPPKE1100 ELECTRICAL PACKET ASSEMBLY

N/S RPTRAN02 110 TO 24VAC WALL TRANSFORMER

www.videolarm.com

C a m e r a M o u n t i n g I n s t r u c t i o n s

W81-IN5481

01-19-2012

• Mounting holes

ACTi: ACM 8511

(4-M3) (4) (88mm)

1”

½”

2”

NOTE:

For all RHP and RHW models a ½” (13mm)

spacer is added for additional height.

English

Español

Para todo el RHP y RHW modela un

espaciador del ½” (13m m) se agrega para la

altura adicional.

Français

Pour tous les RHP et RHW modèle entretoise

de ½ une » (13mm) est ajouté pour la taille

additionnelle.

Für alles RHP und RHW modelliert eine ½“

(13mm) Distanzscheibe hinzugefügt für

zusätzliche Höhe.

Para todo o RHP e RHW modela um

espaçador do ½” (13mm) é adicionado para

a altura adicional.

Per tutti i RHP e RHW modella un

distanziatore del ½„ (13mm) si aggiunge per

altezza supplementare.

Deutsch

Portuguese

Italiano

(HARDWARE) (SPACING)

(1) (1) (88mm)

1”

½”

(1)

2”

• Mounting holes

AVIGILON: HD-Dome Series

(3-#8) (3) (100mm)

(3)

1”

2”

1”

• Mounting holes

ARECONT: AV8185 / AV8365 / AV20185 / AV20365

(4-#8 x ¾”) (75mm)

1”

2”

(4)

• Mounting holes

AXIS: 215

(4-#8) (4) (100mm)

(4)

1”

2”

1”

• Mounting holes

BASLER: BIP2-1000C-DN / BIP2-1300C-DN / BIP-D1000C-DN / BIP-D1300C-DN

(3-#8) (3) (100mm)

(3)

1”

2”

1”

• Mounting holes

AXIS: 233D

(4-#8) (4) (25mm)

(4)

1”

• Mounting holes

CANON: VB-M40

(64mm)

2”

½”

(1)

• Mounting holes

CANON: VB-C60

(64mm)

2”

½”

(1)

• Mounting holes

CANON: VB-C300

(88mm)

(1)

1”

½”

2”

• Mounting holes

ELMO: PTC 400C

(4-#8) (4) (100mm)

(4)

1”

2”

½”

• Mounting holes

JVC: VN-V686BU / VN-V685U

(3-#8) (3) (38mm)

1”

½”

• Mounting holes

PANASONIC: BB-HCM580/581

(1)

(88mm)

1”

½”

(1)

2”

• Mounting holes

PANASONIC: SC386

(4-#8) (4) (25mm)

(4)

1”

• Mounting holes

PANASONIC: WV-CS580 Series

(38mm)

(4-#8)

1”

½”

• Mounting holes

PANASONIC: WV-CS574

(4-#8) (4) (50mm)

(4)

2”

• Mounting holes

(4)

PANASONIC: WV-CS954 / WV-NS954

½”

(13mm)

(4-#8)

• Mounting holes

PANASONIC: WV-NS202 / WV-SC385 / WV-SC384

(4-#8) (4) (75mm)

(4)

1”

2”

• Mounting holes

PIXORD: P-463

(3-#8) (3) (25mm)

(3)

1”

• Mounting holes

SONY: RX Series (RX530 / RX550 / RX570)

(4-M3) (4)

• Mounting holes

SANYO: VCC-HD 5400

(2-#8) (2) (64mm)

2”

½”

• Mounting holes

SONY: EP / ER Series (520 / 550 / 580)

(4-#8) (4) (4) (38mm)

1”

½”

La pagina sta caricando ...

Moog Videolarm FusionDome FDW75C12N Installation And Operation Instructions Manual

Marca: Moog Videolarm

Modello: FusionDome FDW75C12N

Categoria: Accessori per telecamere di sicurezza

Tipo: Installation And Operation Instructions Manual

Questo manuale è adatto anche per

Scarica il pdf

rapporto

in altre lingue

English: Moog Videolarm FusionDome FDW75C12N

Moog Videolarm FusionDome FDW75C12N Installation And Operation Instructions Manual

Questo manuale è adatto anche per

Moog Videolarm FusionDome FDW75C12N Installation And Operation Instructions Manual

in altre lingue

Documenti correlati

Altri documenti