Moog Videolarm FusionDome PFDW75T2N Installation And Operation Instructions Manual

Marca: Moog Videolarm

Modello: FusionDome PFDW75T2N

Categoria: Accessori per telecamere di sicurezza

Tipo: Installation And Operation Instructions Manual

Questo manuale è adatto anche per

PFDW75C2N

www.videolarm.com

P F D W 7 5 C 2 N

Outdoor Pressurized Network FusionDome™

Installation and Operation Instructions for the following models:

PFDW75C2N IP Network Ready 7” Outdoor pressurized dome housing with WM20G

gooseneck wall mount, with 24VAC input, heater/blower, for Network cameras,

120 to 24VAC, 96vA transformer, clear dome

PFDW75T2N IP Network Ready 7” Outdoor pressurized dome housing with WM20G gooseneck

wall mount, with 24VAC input, heater/blower, for Network cameras, 120 to 24VAC,

96vA transformer, tinted dome

81-IN5353

01-13-2012

Before attempting to connect or operate this product, please read these instructions completely.

To be used with the 81-IN5481 Instruction Manual.

IMPORTANT SAFEGUARDS SAFETY PRECAUTIONS

UNPACKING

SERVICE

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with damp cloth.

7 Do not block any of the ventilation openings. Install in accordance with the

manufacturers instructions.

8 Cable Runs- All cable runs must be within permissible distance.

9 Mounting - This unit must be properly and securely mounted to a supporting

structure capable of sustaining the weight of the unit.

Accordingly:

a. The installation should be made by a qualied installer.

b. The installation should be in compliance with local codes.

c. Care should be exercised to select suitable hardware to install the unit, taking into

account both the composition of the mounting surface and the weight of the unit.

10 Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus ( including ampliers) that produce heat.

11 Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding type

plug has two blades and a third grounding prong. The wide blade or the third

prong are provided for your safety. When the provided plug does not t into your

outlet, consult an electrician for replacement of the obsolete outlet.

12 Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

13 Only use attachment/ accessories specied by the manufacturer.

14 Use only with a cart, stand, tripod, bracket, or table specied by the manufacturer,

or sold with the apparatus. When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

15 Unplug this apparatus during lighting storms or when unused for long periods of time.

16 Refer all servicing to qualied service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled of objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or

has been dropped.

Be sure to periodically examine the unit and the supporting structure to make sure that the integrity

of the installation is intact. Failure to comply with the foregoing could result in the unit separating

from the support structure and falling, with resultant damages or injury to anyone or anything struck

by the falling unit.

Unpack carefully. Electronic components can be

damaged if improperly handled or dropped. If an item

appears to have been damaged in shipment, replace

it properly in its carton and notify the shipper.

Be sure to save:

1 The shipping carton and packaging material.

They are the safest material in which to make future

shipments of the equipment.

2 These Installation and Operating Instructions.

If technical support or service is needed, contact us at

the following number:

The lightning ash with an arrowhead symbol,

within an equilateral triangle, is intended to

alert the user to the presence of non-insulated

“dangerous voltage” within the product’s

enclosure that may be of sufcient magnitude

to constitute a risk to persons.

Este símbolo se piensa para alertar al usuario a la presencia

del “voltaje peligroso no-aisIado” dentro del recinto de los

productos que puede ser un riesgo de choque eléctrico.

Ce symbole est prévu pour alerter I’utilisateur à la presence

“de la tension dangereuse” non-isolée dans la clôture de

produits qui peut être un risque de choc électrique.

Dieses Symbol soll den Benutzer zum Vorhandensein der

nicht-lsolier “Gefährdungsspannung” innerhalb der

Produkteinschließung alarmieren die eine Gefahr des

elektrischen Schlages sein kann.

Este símbolo é pretendido alertar o usuário à presença “di

tensão perigosa non-isolada” dentro do cerco dos produtos

que pode ser um risco de choque elétrico.

Questo simbolo è inteso per avvertire I’utente alla presenza

“di tensione pericolosa” non-isolata all’interno della

recinzione dei prodotti che può essere un rischio di scossa

elettrica

The exclamation point within an equilateral

triangle is intended to alert the user to

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

Este símbolo del punto del exclamation se piensa para

alertar al usuario a la presencia de instrucciones importantes

en la literatura que acompaña la aplicación.

Ce symbole de point d’exclamation est prévu pour alerter

l’utilisateur à la presence des instructions importantes dans

la littérature accompagnant l’appareil.

Dieses Ausruf Punktsymbol soll den Benutzer zum

Vorhandensein de wichtigen Anweisungen in der Literatur

alarmieren, die das Gerät begleitet.

Este símbolo do ponto do exclamation é pretendido alertar o

usuário à presença de instruções importantes na literatura

que acompanha o dispositivo.

Questo simbolo del punto del exclamaton è inteso per

avvertire l’utente alla presenza delle istruzioni importanti nella

letteratura che accompagna l'apparecchio.

TECHNICAL SUPPORT

AVAILABLE 24 HOURS

1- 800 - 554 -1124

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER ( OR BACK). NO USER- SERVICE-

ABLE PARTS INSIDE. REFER SEVICING

TO QUALIFIED SERVICE PERSONNEL.

Limited Warranty for Moog Videolarm Products

Moog Videolarm warrants these products to be free from defects in material or workmanship as follows:

PRODUCT CATEGORY PARTS \ LABOR

All Enclosures and Electronics* Five (5) Years

Poles/PolEvators™/CamEvator Three (3) Years

Warrior Series™/Q-View™/IR Illuminators Five (5) Years

SView Series™ Five (5) Years **6 months if used in auto scan/tour operation

Controllers Five (5) Years

Power Supplies Five (5) Years

EcoKit Three (3) Years

Accessory Brackets Five (5) Years

Liberty Dome Three (3) Years

*DeputyDome™, NiteTrac™, Igloo Dome, PurgeDome™ Three (3) Years **6 months if used in auto scan/tour operation

During the labor warranty period, to repair the Product, Purchaser will either return the defective product, freight prepaid, or deliver it to Moog Videolarm

Inc. Decatur GA. The Product to be repaired is to be returned in either its original carton or a similar package affording an equal degree of protection with

a RMA # (Return Materials Authorization number) displayed on the outer box or packing slip. To obtain a RMA# you must contact our Technical Support

Team at 800.554.1124, extension 101. Moog Videolarm will return the repaired Product freight prepaid to Purchaser. Moog Videolarm is not obligated to

provide Purchaser with a substitute unit during the warranty period or at any time. After the applicable warranty period, Purchaser must pay all labor and/or

parts charges.

The limited warranty stated in these product instructions is subject to all of the following terms and conditions.

TERMS AND CONDITIONS

1. NOTIFICATION OF CLAIMS: WARRANTY SERVICE: If Purchaser believes that the Product is defective in material or workmanship, then written notice with an

explanation of the claim shall be given promptly by Purchaser to Moog Videolarm. All claims for warranty service must be made within the warranty period.

If after investigation Moog Videolarm determines the reported problem was not covered by the warranty, Purchaser shall pay Moog Videolarm for the cost of

investigating the problem at its then prevailing per incident billable rate. No repair or replacement of any Product or part thereof shall extend the warranty period

of the entire Product. The speci c warranty on the repaired part only shall be in effect for a period of ninety (90) days following the repair or replacement of that

part or the remaining period of the Product parts warranty, whichever is greater.

2. EXCLUSIVE REMEDY: ACCEPTANCE: Purchaser’s exclusive remedy and Moog Videolarm’s sole obligation is to supply (or pay for) all labor necessary to repair any

Product found to be defective within the warranty period and to supply, at no extra charge, new or rebuilt replacements for defective parts.

3. EXCEPTIONS TO LIMITED WARRANTY: Moog Videolarm shall have no liability or obligation to Purchaser with respect to any Product requiring service during the

warranty period which is subjected to any of the following: abuse, improper use, negligence, accident, lightning damage or other acts of God (i.e., hurricanes,

earthquakes), modi cation, failure of the end-user to follow the directions outlined in the product instructions, failure of the end-user to follow the maintenance

procedures recommended by the International Security Industry Organization, written in product instructions, or recommended in the service manual for the

Product. Furthermore, Moog Videolarm shall have no liability where a schedule is speci ed for regular replacement or maintenance or cleaning of certain parts

(based on usage) and the end-user has failed to follow such schedule; attempted repair by non-quali ed personnel; operation of the Product outside of the

published environmental and electrical parameters, or if such Product’s original identi cation (trademark, serial number) markings have been defaced, altered,

or removed. Moog Videolarm excludes from warranty coverage Products sold AS IS and/or WITH ALL FAULTS and excludes used Products which have not

been sold by Moog Videolarm to the Purchaser. All software and accompanying documentation furnished with, or as part of the Product is furnished “AS IS”

(i.e., without any warranty of any kind), except where expressly provided otherwise in any documentation or license agreement furnished with the Product. Any

cost associated with removal of defective product and installation of replacement product is not included in this warranty.

4. PROOF OF PURCHASE: The Purchaser’s dated bill of sale must be retained as evidence of the date of purchase and to establish warranty eligibility.

DISCLAIMER OF WARRANTY

EXCEPT FOR THE FOREGOING WARRANTIES, Moog Videolarm HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING, BUT NOT LIMITED TO ANY AND/OR ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND/OR

ANY WARRANTY WITH REGARD TO ANY CLAIM OF INFRINGEMENT THAT MAY BE PROVIDED IN SECTION 2-312(3) OF THE UNIFORM COMMERCIAL

CODE AND/OR IN ANY OTHER COMPARABLE STATE STATUTE. Moog Videolarm HEREBY DISCLAIMS ANY REPRESENTATIONS OR WARRANTY THAT

THE PRODUCT IS COMPATIBLE WITH ANY COMBINATION OF NON-Moog Videolarm PRODUCTS OR NON-Moog Videolarm RECOMMENDED PRODUCTS

PURCHASER MAY CHOOSE TO CONNECT TO THE PRODUCT.

LIMITATION OF LIABILITY

THE LIABILITY OF Moog Videolarm, IF ANY, AND PURCHASER’S SOLE AND EXCLUSIVE REMEDY FOR DAMAGES FOR ANY CLAIM OF ANY KIND

WHATSOEVER, REGARDLESS OF THE LEGAL THEORY AND WHETHER ARISING IN TORT OR CONTRACT, SHALL NOT BE GREATER THAN THE ACTUAL

PURCHASE PRICE OF THE PRODUCT WITH RESPECT TO WHICH SUCH CLAIM IS MADE. IN NO EVENT SHALL Moog Videolarm BE LIABLE TO PURCHASER

FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION,

REIMBURSEMENT OR DAMAGES ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS OR FOR ANY OTHER REASON WHATSOEVER.

24 VAC

3.3 Amps

Total Power: 80 Watts

Accessories: Heater: 50 Watts/Blower: 2 Watts

Camera Power: 28 Watts Max

Tools Required: .100” Flat Head Screwdriver

Phillips Head Screwdriver

7/16” Wrench or Socket

24 VAC

3.3 amperios

Energía Total: 80 vatios

Accesorios: Calentador: 50 Watts/Blower: 2 vatio

Energía De la Cámara fotográfica: 28 vatios Max

Las Herramientas Requirieron: Destornillador Principal Plano Del 100"

Destornillador Principal Phillips

24 VCA

3.3 ampères

Puissance Totale : 80 watts

Accessoires : Réchauffeur : 50 Watts/Blower : 2 watts

Puissance D'Appareil-photo : 28 watts Max

Les Outils besoin : Tournevis Principal Plat De 100"

Tournevis Principal Phillips

24 VAC

3.3 Ampere

Gesamtenergie: 80 Watt

Zusatzgeräte: Heizung: 50 Watt/Blower: 2 Watt

Kamera-Energie: 28 watts Max

Werkzeuge Erforderten: 100"Flacher Hauptschraubenzieher

Kreuzkopfhauptschraubenzieher

24 VAC

3.3 ampères

Poder Total: 80 watts

Acessórios: Calefator: 50 Watts/Blower: 2 watt

Poder Da Câmera: 28 watts Max

As Ferramentas Requereram: Chave de fenda Principal Lisa Do 100"

Chave de fenda Principal Phillips

24 VAC

3.3 ampère

Alimentazione Totale: 80 watt

Accessori: Riscaldatore: 50 Watts/Blower: 2 watt

Alimentazione Della

Macchina fotografica: 28 watts Max

Attrezzi Richiesti: Cacciavite Capo Piano Del 100"

Cacciavite Capo "phillips"

Electrical Specifications

Power 24VAC

Class 2 Only

PFDW75C2N

Français

Deutsch

Italiano

Portuguese

Español

English

Contents of Box

*** Pan Tilt boxed separately along with its instructions.

Securely mount bracket to wall. Pull wiring

through bracket and position grommet as shown.

• Con seguridad soporte del montaje a emparedar. Tire del cableado

a través del soporte y del ojal de la posición según lo demostrado.

• Solidement parenthèse de bâti à murer. Tirez le câblage par la

parenthèse et le canon isolant de position comme montré.

• Sicher Einfassung Haltewinkel wall. Ziehen Sie Verdrahtung durch

Haltewinkel und Position Gummimuffe, wie gezeigt.

• Firmemente suporte da montagem a wall. Puxe a fiação através do

suporte e do ilhó da posição como mostrado.

• Saldamente staffa del supporto da wall. Tiri i collegamenti tramite la

staffa ed il gommino di protezione di posizione come indicato.

Screw the (2) bolts into the coupling.

• Atornille (2) los pernos en el acoplador.

• Vissez (2) les boulons dans l'accouplement.

• Schrauben Sie die (2) Schraubbolzen in die Koppe-

lung.

• Parafuse (2) os parafusos no acoplamento.

• Avviti (2) i bulloni nell'accoppiamento.

Wrap Teflon tape around the pipe threads

to ensure a tight seal.

• La cinta del Teflon del abrigo alrededor de la pipa rosca

para asegurar un sello apretado.

• La bande de teflon d'enveloppe autour de la pipe filète

pour assurer un joint serré.

• Verpackung Teflonklebeband um das Rohr verlegt, um

eine feste Dichtung sicherzustellen.

• A fita adesiva do Teflon do envoltório em torno da

tubulação enfía para assegurar um selo apertado.

• Il nastro del Teflon dell'involucro intorno al tubo filetta per

accertare una guarnizione stretta.

Screw the coupling onto the pipe threads

until it is hand tight.

• Atornille el acoplador sobre los hilos de rosca de la pipa

hasta que es mano firmemente.

• Vissez le couplage sur les fils de pipe jusqu'à ce que ce

soit main fortement.

• Schrauben Sie die Koppelung auf die Rohrgewinde, bis

es Hand fest ist.

• Parafuse o acoplamento nas linhas da tubulação até

que esteja mão firmemente.

• Avviti l'accoppiamento sui filetti del tubo fino a che non

sia fortemente mano.

Loop the lanyard over the set screw to

temporarily hold housing.

• Coloque el acollador sobre el tornillo de presión para

celebrar temporalmente la cubierta.

• Faites une boucle la lanière au-dessus de la vis de réglage

pour tenir temporairement le logement.

• Schlingen Sie die Abzuglinie über der Klemmschraube, um

Gehäuse vorübergehend zu halten.

• Dê laços no colhedor sobre o parafuso de fixação para

prender temporariamente a carcaça.

• Colleghi la cordicella in circuito sopra la vite di arresto

temporaneamente per tenere l'alloggiamento.

Make the appropriate wiring connections

from the dome to the gooseneck.

• Haga las conexiones apropiadas del cableado de la bóveda

al gooseneck.

• Établissez les rapports appropriés de câblage à partir du dôme

au col de cygne.

• Stellen Sie die passenden Verdrahtung Beziehungen von der

Haube zum gooseneck her.

• Faça as conexões apropriadas da fiação da abóbada ao

gooseneck.

• Faccia i collegamenti adatti dei collegamenti dalla cupola al

gooseneck.

Undo the lanyard, pull housing up and twist

secure with the locking bolt and washers.

• Deshaga el acollador, tire de contener para arriba y tuerza seguro

con el perno y las arandelas de fijación.

• Défaites la lanière, tirez loger vers le haut et tordez bloqué avec le

boulon et les rondelles de fermeture.

• Annulieren Sie die Abzuglinie, ziehen Sie oben unterbringen und

verdrehen Sie sicheres mit dem verriegelnschraubbolzen und den

Unterlegscheiben.

• Undo o colhedor, puxe abrigar acima e torça seguro com o

parafuso e as arruelas travando.

• Undo la cordicella, tiri l'alloggio in su e torca sicuro con il bullone e

le rondelle di bloccaggio.

Slide the grommet down over the coupling to prevent

water from entering and complete the assembly.

• Resbale el ojal abajo sobre el acoplador para evitar que el agua

entre y para terminar a la asamblea.

• Glissez le canon isolant vers le bas au-dessus de l'accouplement

pour empêcher l'eau d'entrer et pour accomplir l'assemblée.

• Schieben Sie die Gummimuffe unten über der Koppelung, um zu

verhindern, daß Wasser und die Versammlung durchzuführen

hereinkommt.

• Deslize o ilhó para baixo sobre o acoplamento para impedir que a

água entre e para terminar o conjunto.

• Faccia scorrere il gommino di protezione giù sopra l'accoppiamento

per impedire l'acqua entrare e per completare il complessivo.

RJ45

24VAC

Camera

Heater/Blower

Yellow

Green

Yellow

Green

POWER

Max 80 Watts

26 Watts

1/0

Alarm 1

Alarm 2

Alarm 3

Common

Blue

Violet

Gray

White

Make the appropriate male and female connections. Indoor model does not include pre-run cables.

• Haga las conexiones masculinas y femeninas apropiadas. El modelo de interior no incluye pre-funciona los cables.

• Établissez les rapports masculins et femelles appropriés. Le modèle d'intérieur n'inclut pas pré-courent des câbles.

• Stellen Sie die passenden männlichen und weiblichen Beziehungen her. Innenmodell schließt nicht vor-laufen lassen Kabel

ein.

• Faça as conexões masculinas e fêmeas apropriadas. O modelo indoor não inclui pre-funciona cabos.

• Faccia i collegamenti maschii e femminili adatti. Il modello dell'interno non include pre-fa funzionare i cavi.

On board power supply provides 12VDC power

for camera

• A bordo fuente de alimentación proporciona la energía

12VDC para la cámara

• À bord de l'alimentation d'énergie fournit la puissance

12VDC pour l'appareil-photo

• An Bord des Spg.Versorgungsteils stellt Energie 12VDC für

Kamera zur Verfügung

• A bordo da fonte de alimentação fornece o poder 12VDC

para a câmera

• A bordo dell'alimentazione elettrica fornisce il potere 12VDC

per la macchina fotografica

Wire Gauge

Total vA

consumed

,75

1,0

1,5

2,5

AWG

5.5

400

121

600

182

960

292

- - -

120

36.5

180

54.9

300

91.4

480

146

800

243

1300

396

27.1

141

43.0

225

68.6

358

109

571

174

905

275

1440

438

19.8

27.4

130

39.6

225

68.6

350

106

525

160

830

252

13.4

21.3

112

34.1

179

54.6

285

86.9

452

138

720

219

10.6

17.1

27.4

143

43.6

228

69.5

362

110

576

175

9.4

14.3

22.9

119

36.2

190

57.9

301

91.7

480

146

8.8

12.2

19.5

102

31.1

163

49.7

258

78.6

411

125

7.6

10.3

16.8

25.9

140

42.7

215

65.5

340

103

These are recommended maximum distances

for 24VAC with a 10% voltage drop.

• Éstos se recomiendan las distancias máximas para

24VAC con una caída de voltaje del 10%.

• Ceux-ci sont recommandés des distances maximum

pour 24VAC avec une chute de tension de 10%.

• Diese werden maximale Abstände für 24VAC mit

einem 10% Spannungsabfall empfohlen.

• Estes são recomendados distâncias máximas para

24VAC com uma queda de tensão de 10%.

• Questi sono suggeriti distanze massime per 24VAC con

una differenza de potenziale di 10%.

Hand tighten the screws on the dome.

Recommended torque 12 inches/lb (1.35Nm).

• La mano aprieta los tornillos en la bóveda. Esfuerzo de

torsión recomendado 12 inches/lb (el 1.35Nm).

• La main serrent les vis sur le dôme. Couple recom-

mandé 12 inches/lb (1.35Nm).

• Hand ziehen die Schrauben an der Haube fest.

Empfohlene Drehkraft 12 inches/lb (1.35Nm).

• A mão aperta os parafusos na abóbada. Torque

recomendado 12 inches/lb (1.35Nm).

• La mano stringe le viti sulla cupola. Coppia di torsione

suggerita 12 inches/lb (1.35Nm).

To install the dome align the tabs and twist

counter clockwise to secure.

• Para instalar la bóveda alinee las lengüetas y tuerza al revés

a la derecha para asegurar.

• Pour installer le dôme alignez les étiquettes et tordez contre

dans le sens des aiguilles d'une montre pour fixer.

• Um die Haube anzubringen richten Sie die Vorsprünge aus

und verdrehen Sie sich entgegengesetzt nach rechts um zu

sichern.

• Para instalar a abóbada alinhe as abas e torça-as contra no

sentido horário para fixar-se.

• Per installare la cupola allinei le linguette e torca contro in

senso orario per fissare.

Undo the lanyard, pull housing up and twist

secure with the locking bolt and washers.

• Deshaga el acollador, tire de contener para arriba y tuerza seguro

con el perno y las arandelas de fijación.

• Défaites la lanière, tirez loger vers le haut et tordez bloqué avec le

boulon et les rondelles de fermeture.

• Annulieren Sie die Abzuglinie, ziehen Sie oben unterbringen und

verdrehen Sie sicheres mit dem verriegelnschraubbolzen und den

Unterlegscheiben.

• Undo o colhedor, puxe abrigar acima e torça seguro com o

parafuso e as arruelas travando.

• Undo la cordicella, tiri l'alloggio in su e torca sicuro con il bullone e

le rondelle di bloccaggio.

Slide the grommet down over the coupling to prevent

water from entering and complete the assembly.

• Resbale el ojal abajo sobre el acoplador para evitar que el agua

entre y para terminar a la asamblea.

• Glissez le canon isolant vers le bas au-dessus de l'accouplement

pour empêcher l'eau d'entrer et pour accomplir l'assemblée.

• Schieben Sie die Gummimuffe unten über der Koppelung, um zu

verhindern, daß Wasser und die Versammlung durchzuführen

hereinkommt.

• Deslize o ilhó para baixo sobre o acoplamento para impedir que a

água entre e para terminar o conjunto.

• Faccia scorrere il gommino di protezione giù sopra l'accoppiamento

per impedire l'acqua entrare e per completare il complessivo.

1514

1312

When pressurizing unit be sure to set the

guage or regulator from 10-20psi (.7-1.4bar).

• Al presurizar la unidad sea seguro fijar la medida o el

regulador de 10-20psi (7-1.4bar).

• En pressurisant l'unité soyez sûr de placer la jauge ou le

régulateur de 10-20psi (7-1.4bar).

• Wenn Sie Maßeinheit unter Druck setzen, seien Sie sicher,

das Eichmaß oder den Regler von 10-20psi (7-1.4bar)

einzustellen.

• Ao pressurizar a unidade seja certo ajustar o guage ou o

regulador de 10-20psi (7-1.4bar).

• Nel pressurizzare l'unità sia sicuro regolare il misuratore o

il regolatore da 10-20psi (7-1.4bar).

PSI

100

150

200

250

300

Nitrogen

Tank

Hose

Regulator

Air Chuck

580

Fitting

Place the air chuck on the tank valve and

begin filling until pressure relief valve opens.

• Coloque la tirada del aire en la válvula del tanque y comience

a llenar hasta que la válvula de descarga de presión se abre.

• Placez le mandrin d'air sur la valve de réservoir et commencez

à remplir jusqu'à ce que la valve de décompression s'ouvre.

• Setzen Sie die Luftklemme auf das Behälterventil und fangen Sie

an zu füllen, bis Druckablaßventil sich öffnet.

• Coloque o mandril do ar na válvula do tanque e comece a

encher-se até que a válvula de escape de pressão abra.

• Disponga il mandrino dell'aria sulla valvola del carro armato e

cominci a riempirsi fino a che la valvola limitatrice della

pressione non si apra.

Air Chuck

Tank

Valve

Open the relief valve. Drain all air from the housing 3

times to remove all moisture.

• Abra la válvula de descarga. Drene todo el aire de la cubierta y

de la repetición 3 times dos veces para quitar toda la humedad.

• Ouvrez la soupape de sécurité. Évacuez tout l'air le logement et la

répétition 3 times pour enlever toute l'humidité.

• Öffnen Sie das Sicherheitsventil. Lassen Sie alle Luft aus dem

Gehäuse und der Wiederholung zweimal ab, um alle Feuchtigkeit

zu entfernen 3 times.

• Abra a válvula de escape. Drene todo o ar da carcaça e do

repeat 3 times para remover toda a umidade.

• Apra la valvola di sfiato. Vuoti due volte tutta l'aria 3 times

dall'alloggiamento e dalla ripetizione per rimuovere tutta l'umidità.

After purging check the housing pressure. It

should be around 5psi (.34bar).

• Después de purgar el cheque la presión de la cubierta.

Debe estar alrededor de 5psi (34bar).

• Après la purge du contrôle la pression de logement. Elle

devrait être autour de 5psi (34bar).

• Nachdem Überprüfung der Gehäusedruck bereinigt

worden ist. Sie sollte um 5psi (34bar) sein.

• Após ter removido a verificação a pressão da carcaça.

Deve ser em torno de 5psi (34bar).

• Dopo l'eliminazione dell'inceppo del controllo la pressione

dell'alloggiamento. Dovrebbe essere intorno a 5psi

(34bar).

PSI

PRESSURIZED HOUSING

Replacement Parts List

Part No. Description

1 RPPFD040 Housing Top

2 RPVL1938 Removable Pendent Coupling

3 RPVL1802 Plastic Rain Shroud

4 RPVL1795 Tank Valve Gasket

5 RP96RSORG11 Main O-Ring 9.25"

6 RPPFDTR01 Trim Ring w/o Dome

7 RCPFD7 Clear Dome with sealing O-Ring

7b RCTPFD7 Tinted Dome with sealing O-Ring

8 RPPFDT03 Internal Sealing Bracket Assembly

9 RP96RSORG10 Small O-Ring 4.5"

10 RP70PT07a Hermetic Connector, Gasket, Cable

11 RP95VALV08 5 to 7 psi Pressure Relief Valve

12 RP95VALV07 Tank Valve

13 RPFD072 24VAC Heater

14 RPVL1798a ½" Spacers (Set of 4)

15 RP40PCPPFD8 Connection PCB Assembly

16 RPFD060 Main Bracket Assembly

17 RPFD080 Blower

N/S RP40CAPPFD811 External Input Video/Power Cables

N/S RP46PKH2098 Packet Assembly-Hardware

N/S RP46PKH1100 Packet Assembly-Electrical

Product Registration/Warranty

Thank you for choosing Moog Videolarm. We value your patronage and are solely committed to providing you with the highest

quality products available and superior customer service.

Should a problem arise, rest assure that Moog Videolarm stands behind its products by offering impressive warranty plans: 3 Years on all Housings, Poles,

Power Supplies, and Accessories and 5 Years on camera systems (SView, QView, Warriors), and InfraRed Illuminators.

Take a few moments and validate your purchase via the Online Product Registration Form at

www.videolarm.com/productregistration.jsp

• Simple and Trouble-Free RMA process

• Added into customer database to receive product updates / news

• Eliminate the need to archive original purchase documents:

Receipts, Purchase Orders, etc…