Rockford Fosgate Prime R14X2 Manuale del proprietario

Categoria
Altoparlanti della soundbar
Tipo
Manuale del proprietario
R14X2 R1525X2 R165X3
R1675X2 R168X2 R169X2
R169X3
Serial Number: Date of Purchase:
Installation & Operation
FULL RANGE
SPEAKERS
2
Dear Customer,
Congratulations on your purchase of the world’s finest brand of car audio
amplifiers. At Rockford Fosgate we are fanatics about musical reproduc-
tion at its best, and we are pleased you chose our product. Through
years of engineering expertise, hand craftsmanship and critical testing
procedures, we have created a wide range of products that reproduce
music with all the clarity and richness you deserve.
For maximum performance we recommend you have your new Rockford
Fosgate product installed by an Authorized Rockford Fosgate Dealer,
as we provide specialized training through Rockford Technical Training
Institute (RTTI). Please read your warranty and retain your receipt and
original carton for possible future use.
Great product and competent installations are only a piece of the puzzle
when it comes to your system. Make sure that your installer is using
100% authentic installation accessories from Rockford Fosgate in your
installation. Rockford Fosgate has everything from RCA cables and
speaker wire to power wire and battery connectors. Insist on it! After all,
your new system deserves nothing but the best.
To add the finishing touch to your new Rockford Fosgate image order
your Rockford accessories, which include everything from T-shirts to
jackets.
Visit our web site for the latest information on all Rockford products
;
www.rockfordfosgate.com
or, in the U.S. call 1-800-669-9899 or FAX 1-800-398-3985. For all other
countries, call +001-480-967-3565 or FAX +001-480-966-3983.
Table of Content
If, after reading your manual, you still have questions regarding this prod-
uct, we recommend that you see your Rockford Fosgate dealer. If you need
further assistance, you can call us direct at 1-800-669-9899. Be sure to
have your serial number, model number and date of purchase available
when you call.
Safety
This symbol with “WARNING” is intended
to alert the user to the presence of important
instructions. Failure to heed the instructions
will result in severe injury or death.
This symbol with “CAUTION” is intended to
alert the user to the presence of important
instructions. Failure to heed the instructions
can result in injury or unit damage.
sTo prevent injury and damage to the unit, please read and follow the
instructions in this manual. We want you to enjoy this system, not get
a headache.
sIf you feel unsure about installing this system yourself, have it installed
by a qualified Rockford Fosgate technician.
sBefore installation, disconnect the battery negative (-) terminal to
prevent damage to the unit, fire and/or possible injury.
Introduction
©2013 Rockford Corporation. All Rights Reserved. ROCKFORD FOSGATE and associated logos where applicable are registered trademarks of Rockford
Corporation in the United States and/or other countries. All other trademarks are the property of their respective owners. Specifications subject to change without notice.
PRACTICE SAFE SOUND
Continuous exposure to sound pressure levels over 100dB may cause
permanent hearing loss. High powered auto sound systems may
produce sound pressure levels well over 130dB. Use common sense
and practice safe sound.
PRATIQUEZ UNE ÉCOUTE SANS RISQUES
Une exposition continue à des niveaux de pression acoustique upérieurs à
100 dB peut causer une perte d’acuité auditive permanente. Les systèmes
audio de forte puissance pour auto peuvent produire des niveaux de
pression acoustique bien au-delà de 130 dB. Faites preuve de bon sens et
pratiquez une écoute sans risques
PRACTIQUE EL SONIDO SEGURO
El contacto continuo con niveles de presión de sonido superiores a 100
dB puede causar la pérdida permanente de la audición. Los sistemas de
sonido de alta potencia para automóviles pueden producir niveles de
presión de sonido superiores a los 130 dB. Aplique el sentido común y
practique el sonido seguro.
PRAKTIZIEREN SIE SICHEREN SOUND
Fortgesetzte Geräuschdruckpegel von über 100 dB können beim
Menschen zu permanentem Hörverlust führen. Leistungsstarke
Autosoundsysteme können Geräuschdruckpegel erzeugen, die weit über
130 dB liegen. Bitte wenden Sie gesunden Menschenverstand an und
praktizieren Sie sicheren Sound.
OSSERVATE LE REGOLE DEL SUONO SENZA PERICOLI
La costante esposizione a livelli di pressione acustica al di sopra dei
100dB possono causare la perdita permanente dell’udito. I sistemi
audio ad alta potenza possono produrre livelli di pressione acustica ben
superiori ai 130dB. Si consiglia il buon senso e l’osservanza delle regole
del suono senza pericoli
2 Introduction
3-6 Specifications
7 Installation
Installation Considerations
Mounting
8-11 Additional Languages
French
Spanish
German
Italian
12 Limited Warranty Information
3
:WLJPÄJH[PVUZ
Model
R14X2 R1525X2 R165X3 R1675X2 R168X2 R169X2 R169X3
Nominal Diameter
4.0”
(102mm)
5.25”
(133)mm
6.5”
(165mm)
6.75”
(171.5mm)
6” x 8”
(152 x 203mm)
6” x 9”
(152 x 230mm)
6” x 9”
(152 x 230mm)
Description 2-Way 2-Way 3-Way 2-Way 2-Way 2-Way 3-Way
Nominal Impedance 41 41 41 41 41 41 41
Frequency Response 100-20kHz 62-20kHz 52-20kHz 52-20kHz 51-20kHz 48-20kHz 47-20kHz
Voice Coil Diameter
1.0”
(25.4mm)
1.0”
(25.4mm)
1.0”
(25.4mm)
1.0”
(25.4mm)
1.0”
(25.4mm)
1.0”
(25.4mm)
1.0”
(25.4mm)
Power Rating
(RMS/Peak)
30W / 60W 40W / 80W 45W / 90W 45W / 90W 55W / 110W 65W / 130W 65W / 130W
Fs -
Free Air Resonance 133.5 Hz 83 Hz 69 Hz 69 Hz 67.5 Hz 63.5 Hz 63 Hz
Qts 1.22 0.83 0.74 0.75 1.00 0.69 0.71
Vas
0.04ft
3
(1.0L)
0.18ft
3
(5.2L)
0.47ft
3
(13.3L)
0.46ft
3
(12.9L)
0.43ft
3
(12.3L)
0.58ft
3
(16.5L)
0.61ft
3
(17.3L)
Sensitivity
(1W/1M) 85dB 88dB 91dB 91dB 87dB 90dB 90dB
Sensitivity
(2.83V/1M) 88dB 91dB 94dB 94dB 90dB 93dB 93dB
Xmax
0.04”
(1mm)
0.04”
(1mm)
0.07”
(1.9mm)
0.07”
(1.9mm)
0.08”
(2.1mm)
0.10”
(2.6mm)
0.10”
(2.6mm)
Mounting Diameter
3.62”
(91.9mm)
4.69”
(119mm)
5.51”
(140mm)
5.59”
(142mm)
5.07”x7.31”
(128.8x185.8mm)
5.93”x8.59”
(150.5x218.2mm)
5.93”x8.59”
(150.5x218.2mm)
Mounting Depth
1.72”
(43.6mm)
1.93”
(49mm)
2.15”
(54.5mm)
2.19”
(53.8mm)
2.54”
(64.5mm)
2.85”
(72.4mm)
2.85”
(72.4mm)
Grille/Trim Ring YES YES YES YES NO YES YES
Adaptor Plate NO NO NO NO NO NO NO
See pages 4-6 for additional dimensions
CEA 2031
Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards. This means your speaker has the capacity to handle
power under continuous demand, not instantaneous power handling that over time can damage voice coils.
VERIFIED WITH KLIPPEL
To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker engineering personnel must be trained and certified by
Klippel prior to using the three separate Klippel systems to design, develop and test. Rockford Fosgate has made the investment in Klippel to
deliver the best possible speakers and subwoofers to their customers.
4
:WLJPÄJH[PVUZ
illus.-1.1
R165X3
R14X2
R1525X2
2.15"
(54.5mm)
2.59"
(65.9mm)
6.14"
(155.9mm)
Diameter
5.24"
(133mm)
Diameter
4.55"
(115.6mm)
Diameter
6.5"
(165mm)
Diameter
4.39"
(111.6mm)
5.31"
(135mm)
Diameter
4.05"
(102.8mm)
Diameter
4.05"
(129.7mm)
Diameter
3.7"
(94mm)
3.22"
(81.7mm)
3.62"
(91.9mm)
Diameter
6.09"
(154.8mm)
Diameter
4.69"
(119mm)
Diameter
6.73"
(171mm)
Diameter
5.51"
(140mm)
Diameter
1.93"
(49mm)
2.14"
(54.4mm)
1.83"
(46.4mm)
3.74"
(95mm)
1.72"
(43.6mm)
5
:WLJPÄJH[PVUZ
illus.-1.2
R1675X2
R168X2
6.77"
(172mm)
Diameter
6.46"
(164mm)
Diameter
4.57"
(116mm)
7"
(178mm)
Diameter
5.59"
(142mm)
Diameter
2.38"
(60.4mm)
7.99"
(203mm)
4.13”
(105mm)
4.13
(117.3mm)
4.89”
(124.1mm)
5.7”
(144.8mm)
5.07”
(128.8mm)
7.31”
(185.8mm)
2.54”
(64.5mm)
2.91”
(73.9mm)
2.19"
(53.8mm)
6
:WLJPÄJH[PVUZ
illus.-1.3
R169X2
R169X3
9.22"
(234.2mm)
6.49"
(164.8mm)
4.78"
(121.3mm)
6.48"
(164.5mm)
8.59"
(218.2mm)
2.85"
(72.4mm)
3.22"
(81.9mm)
5.93"
(150.5mm)
7.56"
(192mm)
10.2"
(259mm)
9.22"
(234.2mm)
6.49"
(164.8mm)
4.78"
(121.3mm)
6.48"
(164.5mm)
8.59"
(218.2mm)
2.85"
(72.4mm)
3.22"
(81.9mm)
5.93"
(150.5mm)
7.56"
(192mm)
10.2"
(259mm)
7
Rear
Deck
Cutout
Hole
Example of rear
deck installation
Cutout
Hole
Example of standard
door installation
0UZ[HSSH[PVU
Contents
s(1) Pair Prime Series Full Range Speakers
s(1) Pair of grilles/trim rings (R14X2, R1525X2, R165X3,
R1675X2, R169X2 and R169X3 only)
sInstallation Accessories (16 ft., 26 gauge speaker wire, 8 speed
clips and 4 mounting screws)
Installation Considerations
Before beginning any installation, follow these simple rules:
1. Be sure to carefully read and understand the instructions before
attempting to install these speakers.
2. For safety, disconnect the negative lead from the battery prior to
beginning the installation.
3. For easier assembly, we suggest you run all wires prior to mounting
your speakers in place.
4. Use high quality connectors for a reliable installation and to minimize
signal or power loss.
5. Think before you drill! Be careful not to cut or drill into gas tanks, fuel
lines, brake or hydraulic lines, vacuum lines or electrical wiring when
working on any vehicle. If installation in a boat, take care not to cut or
drill through the main hull.
6. Never run wires underneath the vehicle. Running the wires inside the
vehicle or hull area provides the best protection.
7. Avoid running wires over or through sharp edges. Use rubber or
plastic grommets to protect any wires routed through metal, especially
the firewall.
Mounting
1. Determine where the speakers will be mounted. Ensure an area large
enough for the speaker to mount evenly. Be sure that the mounting
location is deep enough for the speaker to fit; if mounting in a door,
operate all functions (windows, locks, etc.) through their entire
operating range to ensure there is no obstruction.
2. Refer to the specification chart to determine the proper diameter hole
to cut for your speaker model. Cutting and mounting templates can be
found at www.rockfordfosgate.com.
3. Mark the locations for the mounting screws. Drill the holes with a
1/8” bit.
4. Feed the speaker wires through the cutout and connect to the speaker
terminals. Be sure to observe proper polarity when connecting the
wires.The speaker’s positive terminal is indicated with a “+”.
5. Fit the trim ring over the speaker and mount into place using four (4)
screws.
6. Tighten the screws until the speaker is snug in place to prevent
rattling. Do not over tighten the screws.
illus.-2.1
illus.-2.2
8
-YHUsHPZ
Considérations Concernant L’installation
Avant de commencer l’installation, suivez les règles ci-dessous:
1. Veillez à bien lire et comprendre les instructions avant d’essayer d’installer les haut-parleurs.
2. Par mesure de sécurité, débranchez le fil négatif de la batterie avant de commencer l’installation.
3. Pour faciliter le montage des haut-parleurs, il est conseillé d’installer tous les câbles au préalable.
4. Utilisez des connecteurs de haute qualité pour assurer une installation fiable et réduire au minimum la perte de signal ou de puissance.
5. Réfléchissez bien avant de percer.Veillez à ne pas couper ou percer le réservoir d’essence, le câblage électrique ou les conduites de carburant, de
freinage hydraulique ou de dépression en travaillant sur un véhicule. En cas d’installation sur un bateau, veillez à ne pas couper ou percer la coque
principale.
6. Ne jamais faire passer de fils sous le véhicule. Leur installation à l’intérieur du véhicule ou de la coque assure la meilleure protection.
7. Évitez de faire passer des fils sur des bords tranchants ou dans des orifices à arêtes vives. Utilisez des bagues en caoutchouc ou en plastique pour
protéger les fils traversant une plaque de métal, notamment le tablier.Emplacements De Montage
Montage
1. Déterminez l’emplacement des haut-parleurs.Veillez à ce que la surface plane soit assez grande pour assurer un contact uniforme du haut-parleur.
Vérifiez que l’emplacement est assez profond pour le haut-parleur ; en cas de montage dans une portière, actionnez toutes les commandes (fenêtres,
serrures, etc.) jusqu’aux extrémités de leurs courses pour vous assurer qu’il n’y a pas d’obstruction.
2. Consultez le tableau des caractéristiques pour déterminer le diamètre de l’orifice à découper pour votre modèle de haut-parleur. Le gabarit fourni donne
aussi le bon diamètre de découpe.Les gabarits de coupe et de montage sont disponibles sur la page www.rockfordfosgate.com/rftech.
3. Marquez l’emplacement des vis de montage. Percez les trous avec une mèche de 1/8 de pouce (3,2 mm).
4. Faites passer les fils de haut-parleur à travers l’orifice découpé et branchez-les aux bornes du haut-parleur.Veillez à bien respecter la polarité lors du
branchement. La borne positive du haut-parleur est indiquée par un « + ».
5. Disposez l’anneau de garniture sur le haut-parleur et fixez-le avec quatre (4) vis.
6. Serrez les vis jusqu’à ce que le haut-parleur soit bien ajusté, de façon à prévenir tout cliquetis, mais évitez tout serrage excessif..
9
,ZWH|VS
Consideraciones para la instalación
Antes de comenzar cualquier instalación, siga estas simples normas:
1. 1. Asegúrese de leer cuidadosamente y de entender las instrucciones antes de tratar de instalar estos altavoces.
2. Por seguridad, desconecte el conductor negativo de la batería antes de comenzar la instalación.
3. Para facilitar el montaje, sugerimos que tienda todos los cables antes de montar sus altavoces en su sitio.
4. Utilice conectores de alta calidad para tener una instalación confiable y para reducir al mínimo las pérdidas de señal o de potencia.
5. ¡Piense siempre antes de perforar! Tenga cuidado de no cortar ni perforar en tanques de combustible, tuberías de combustible, frenos o hidráulicas,
tuberías de vacío o cableado eléctrico al trabajar en un vehículo. Si la instalación se hace en un bote, tenga cuidado de no cortar ni perforar a través
del casco principal.
6. Nunca tienda cables abajo del vehículo.Tender los cables adentro del vehículo o casco proporciona la mejor protección.
7. Evite tender cables arriba o a través de bordes filosos. Use arandelas aislantes de caucho para proteger los cables tendidos a través de metal,
especialmente la mampara cortafuegos.Montage
Montaje
1. Determine adónde se montará los altavoces.Asegúrese de que haya un área suficientemente grande para montar de manera plana el altavoz.Asegúrese
de que el lugar de montaje sea suficientemente profundo para que quepa el altavoz, si se monta en una puerta, accione todas las funciones (ventanas,
cerradura, etc.) en toda su gama de funcionamiento para asegurarse de que no haya obstrucciones.
2. Consulte la tabla de especificaciones para determinar cuales son los diámetros correctos para el agujero a cortar para su modelo de altavoz. La plantilla
proporcionada también le da la medida correcta del recorte.Se puede hallar las plantillas para el corte y el montaje en www.rockfordfosgate.com/rftech.
3. Marque las localidades para los tornillos de montaje. Perfore los agujeros usando una broca de 1/8 pulg.
4. Tienda los cables del altavoz a través del recorte y conecte a los terminales del altavoz.Asegúrese de usar la polaridad correcta al conectar los cables.
El terminal positivo del altavoz está identificado con un símbolo “+”.
5. Coloque el anillo de acabado arriba del altavoz y móntelo en su sitio usando cuatro (4) tornillos.
6. Apriete los tornillos hasta que el altavoz esté ajustado en su sitio para evitar vibraciones. No apriete demasiado los tornillos.
10
+L\[ZJO
Einbauüberlegungen
Befolgen Sie vor dem Einbau diese einfachen Regeln:
1. 1. Lesen Sie die Anleitung sorgfältig, bevor Sie versuchen diese Lautsprecher einzubauen.
2. Entfernen Sie vor dem Einbau aus Sicherheitsgründen das negative Kabel von der Batterie.
3. Um die Montage zu erleichtern, empfehlen wir alle Kabel vor der Befestigung Ihrer Lautsprecher zu verlegen.
4. Verwenden Sie nur Qualitätsstecker, um einen zuverlässigen Einbau zu gewährleisten und Signal- und Stromverlust zu minimieren.
5. Denken Sie nach, bevor Sie bohren! Achten Sie darauf, nicht in den Benzintank, die Benzin-, Brems- oder hydraulischen Leitungen,Vakuumleitungen
oder Elektrokabel zu schneiden oder zu bohren,wenn Sie am Fahrzeug arbeiten.Achten Sie beim Einbau in einem Boot darauf, nicht durch den
Bootsrumpf zu schneiden oder zu bohren.
6. Verlegen Sie Kabel nie unter dem Fahrzeug. Die Kabel im Fahrzeug oder Bootsrumpf zu verlegen, bietet den besten Schutz.
7. Vermeiden Sie es, Kabel über scharfe Kanten zu verlegen.Verwenden Sie Gummi- oder Plastikringe, um Kabel zu schützen, die durch Metall verlegt
werden (besonders die Feuerwand).
Befestigung
1. Entscheiden,wo die Lautsprecher befestigt werden sollen. Gewährleisten, dass der Platz ausreicht, um den Lautsprecher gleichmäßig zu befestigen.
Gewährleisten, dass die Befestigungsstelle ausreichende Tiefe für den Lautsprecher hat; beim Einbau in einer Türe alle Funktionen (Fenster, Schloss
usw.) in ihrem ganzen Bereich ausprobieren um zu gewährleisten, dass keine Blockierung eintritt.
2. Die Tabelle in den Technischen Daten gibt den richtigen Lochdurchmesser für Ihr Lautsprechermodell zum Ausschneiden an. Die beiliegende Schablone
zeigt ebenfalls die richtige Ausschneidegröße an.Schneide- und Befestigungsschablonen finden Sie unter www.rockfordfosgate.com/rftech.
3. Die Stellen für die Befestigungsschrauben markieren. Die Löcher mit einer 1/8-Zoll (3,2 mm) Bohrerspitze bohren.
4. Die Lautsprecherkabel durch das Loch führen und an den Lautsprecherausgängen anschließen. Beim Anschließen der Kabel die ordnungsgemäße
Polarität beachten. Der positive Anschluss des Lautsprechers ist mit einem „+“ markiert.
5. Den Zierring über den Lautsprecher legen und mit 4 (vier) Schrauben an seinem Platz befestigen.
6. Die Schrauben anziehen, bis der Lautsprecher eng an seinem Platz anliegt, um Klappern zu verhindern. Die Schrauben nicht zu fest anziehen..
11
0[HSPHUV
Considerazioni sull’installazione
Prima di iniziare qualsiasi operazione d’installazione, vi consigliamo di seguire queste semplici regole:
1. Assicuratevi di aver letto tutte le istruzioni con cura e di averle capite prima di effettuare qualsiasi tentativo d’installazione neiconfronti dell’unità.
2. Per motivi di sicurezza, scollegate il cavo negativo dalla batteria prima di dare l’avvìo all’installazione.
3. Per facilitare il montaggio, vi suggeriamo di far scorrere tutti i fili prima di montare la vostra unità nella sua ubicazione.
4. Usate connettori di alta qualità per garantire un’installazione che dà affidamento e per ridurre al minimo la perdita di segnali o di potenza.
5. State attenti prima di trapanare! Cercate di non trapanare e di non incidere i serbatoi della benzina; le condutture del carburante, dei freni, del sistema
idraulico e a depressione; nonché i fili elettrici quando state lavorando su qualsiasi veicolo.
6. Non fate mai scorrere i fili sotto il veicolo.Avrete la protezione migliore faccendo scorrere i fili all’interno del veicolo.
7. Evitate di far scorrere i fili sopra o attraverso delle estremità affilate. Usate guarnizioni di tenuta in gomma o in plastica per proteggere qualsiasi filo che
passi attraverso del metallo, soprattutto il parafiamma.
Montaggio
1. Decidete dove montare gli altoparlanti.Assicuratevi che sia un’area abbastanza grande per poter montare l’altoparlante a livello e abbastanza profonda
per poterlo collocare comodamente. Se lo montate all’interno di uno sportello, controllate tutte le funzioni (finestre, serrature, ecc.), una alla volta, per
assicurarvi che non ci siano ostruzioni.
2. Fate riferimento alla tabella delle specifiche per stabilire il diametro corretto del foro che dovrete praticare per il modello del vostro altoparlante.Si
possono trovare le sagome per il taglio e il montaggio presso www.rockfordfosgate.com/rftech.
3. Marcare le posizioni per le viti di montaggio. Praticare i fori con una punta da trapano di 1/8 di pollice (3,2 mm).
4. Passare i cavi del diffusore tramite l’apertura e collegarli ai terminali.Verificare che la polarità sia corretta quando si collegano i cavi. Il terminale positivo
del diffusore è identificato dal “+”.
5. Adattare l’anello di finitura sul diffusore e montare in posizione servendosi delle quattro (4) viti.
6. Per evitare rumore dovuto a vibrazioni serrare le viti finché il diffusore non sia saldamente in posizione. Non serrare le viti in modo eccessivo..
12
Rockford Corporation offers a limited warranty on Rockford Fosgate products on the following terms:
Length of Warranty
Speakers, Signal Processors, PRIME and PUNCH Amplifiers – 1 Year
POWER Amplifiers – 2 Years
Any Factory Refurbished Product – 90 days (receipt required)
What is Covered
This warranty applies only to Rockford Fosgate products sold to consumers by Authorized Rockford Fosgate Dealers in the United States of America or its
possessions. Product purchased by consumers from an Authorized Rockford Fosgate Dealer in another country are covered only by that country’s Distribu-
tor and not by Rockford Corporation.
Who is Covered
This warranty covers only the original purchaser of Rockford product purchased from an Authorized Rockford Fosgate Dealer in the United States. In order
to receive service, the purchaser must provide Rockford with a copy of the receipt stating the customer name, dealer name, product purchased and date of
purchase.
Products found to be defective during the warranty period will be repaired or replaced (with a product deemed to be equivalent) at Rockford’s discretion.
What is Not Covered
1. Damage caused by accident, abuse, improper operations,water, theft, shipping.
2. Any cost or expense related to the removal or reinstallation of product.
3. Service performed by anyone other than Rockford or an Authorized Rockford Fosgate Service Center.
4. Any product which has had the serial number defaced, altered, or removed.
5. Subsequent damage to other components.
6. Any product purchased outside the U.S.
7. Any product not purchased from an Authorized Rockford Fosgate Dealer.
Limit on Implied Warranties
Any implied warranties including warranties of fitness for use and merchantability are limited in duration to the period of the express warranty set forth
above. Some states do not allow limitations on the length of an implied warranty, so this limitation may not apply. No person is authorized to assume for
Rockford Fosgate any other liability in connection with the sale of the product.
How to Obtain Service
Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford Cus-
tomer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of
product to Rockford.
EU Warranty
This product meets the current EU warranty requirements, see your Authorized dealer for details.
>HYYHU[`
Installation assistance availible at:
www.rockfordfosgate.com/rftech
ROCKFORDFOSGATE.COM
3OUTH2OCKFORD$RIVEs4EMPE!RIZONA5NITED3TATES
$IRECTs4OLL&REE
Prin
ted
in
Ch
in
a
1
21112 B
C
F12
30
-
5
7
8
99-
03
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13

Rockford Fosgate Prime R14X2 Manuale del proprietario

Categoria
Altoparlanti della soundbar
Tipo
Manuale del proprietario