ATEN CS1742 Guida Rapida

Marca: ATEN

Modello: CS1742

Tipo: Guida Rapida

Package Contents

1 2-Port USB Dual-View KVMP™ Switch

2 KVM Cables (Audio/Video)

2 KVM Cables (USB/Video)

1 Firmware Upgrade Cable

1 User Instructions

Hardware Installation

other trademarks are the property of their respective owners.

This product is RoHS compliant.

Part No. PAPE-1223-S01G Printing Date: 12/2014

2/4-Port USB Dual-View KVMP™ Switch

Quick Start Guide

CS1742 / CS1744

Hardware Review

Front View

1. Port Selection Switches

2. Port LEDs

3. USB Port

Rear View

1. Power Jack

2. Firmware Upgrade Section

3. Console Port Section

4. CPU Port Section

5. USB Port

Hardware Installation

1. Plug your Console devices (USB keyboard, USB mouse, monitors,

microphone and speakers), into the switch’s Console Ports.

2. Use the Port A KVM in Green cable (the one with the USB connector)

to connect any available CPU A port to the ﬁ rst VGA port and the USB

port of the computer you are installing.

3. Use the Port B KVM cable in Orange (the one with the microphone and

speaker connectors) to connect the CPU B port to the second VGA port

and the audio jacks of the computer you are installing.

Note: Be sure that the Port B cable is in the same CPU port as the Port

A cable — both in Port 1; both in Port 2, etc.

4. Connect your USB peripherals to the USB ports located on the front

and rear panels.

5. If you choose to use external power, plug the power adapter cable

into the switch’s Power Jack, then plug the power adapter into an AC

power source.

Note: The power adapter should be DC5V 2.6A with the inside positive

and the outside negative:

6. Turn on the power to the computers.

Operation

The CS1742 / CS1744 hotkey function makes it convenient to operate

your KVM installation from the keyboard.

Note: If using the Scroll Lock key conﬂ icts with other programs running

on the computer, the Ctrl key can be used

1. Invoking hotkey mode:

Press [Scroll Lock] or [Ctrl] twice

2. Detailed Hotkey operation

Hotkeys Action

[Scoll Lock]

[Enter] Switches KVM focus + Audio + Peripheral to the

next Port

[n] [Enter] Switches KVM focus + Audio + Peripheral to

Port n

[n] [K] [Enter] Switches KVM focus to Port n

[n] [U] [Enter] Switches Peripheral to Port n

[n] [S] [Enter] Switches Audio to Port n

[n] [K] [U]

[Enter] Switches KVM focus + Peripheral to Port n

[n] [K] [S] [Enter] Switches KVM focus + Audio to Port n

[n] [U] [S] [Enter] Switches Audio + Peripheral to Port n

[n] [K] [U] [S]

[Enter]

Switches KVM focus + Audio + Peripheral to

Port n

[K] [Enter] Switches KVM focus to the next Port

[U] [Enter] Switches Peripheral to the next Port

[S] [Enter] Switches Audio to the next Port

[A] [Enter] Begins Auto Scan function at 5 second intervals

(default)

[A] [n] [Enter] Begins Auto Scan function at n second intervals

[n] represents any number 1 to 4, except auto scan function where

signiﬁ es 1 to 99 seconds

[K] represents the KVM focus

[U] represents the USB Peripheral device

[S] represents the speakers and microphone

[A] represents Auto Scan function

For a complete list of Hotkey functions, refer to the User Manual

Manual Switching

For manual port selection:

• Press a port selection pushbutton for less than two seconds to bring

the KVM, USB hub, and audio focus to the computer attached to its

corresponding port.

• Press a port selection pushbutton for longer than two seconds to bring

only the KVM focus to the computer attached to its corresponding port.

• Press pushbuttons 1 and 2 simultaneously for 2 seconds to start Auto

Scan Mode.

CS1742/CS1744 2/4-Port Dual-View KVM Switch Quick Start Guide www.aten.com

Description de l’appareil

Vue avant

1. Commutateurs de sélection des ports

2. Voyants de ports

3. Port USB

Vue arrière

1. Pris jack d’alimentation électrique

2. Section Mise à niveau du microprogramme

3. Section port de la console

4. Section port du processeur

5. Port USB

Installation du matériel

1. Connectez les composants de console (clavier USB, souris USB, écrans,

microphone et haut-parleurs) au ports Console du commutateur.

2. Utilisez le câble KVM Port A dans le vert (celui qui comporte un

connecteur USB) pour connecter un port UC A disponible au premier

port VGA et le port USB de l'ordinateur que vous installez.

3. Utilisez le câble KVM Port B dans l'orange (celui qui comporte les

connecteurs du microphone et des haut-parleurs) pour connecter le

port UC B au second port VGA et les jacks audio de l'ordinateur que

vous installez.

Remarque : Veillez à connecter le câble Port B au port UC du câble

Port A (les deux aux port 1, les deux au port 2, etc.).

4. Connectez les périphériques USB aux ports USB situés sur les panneaux

avant et arrière.

5. Si vous choisissez d’utiliser une alimentation externe, branchez le

câble de l’adaptateur d'alimentation électrique au connecteur jack

d'alimentation électrique, puis connectez l’adaptateur électrique à une

source d’alimentation CA.

Remarque : L'adaptateur électrique doit avoir la spéciﬁ cation DC5V

2,6 A avec borne intérieure positive et borne extérieure

négative :

6. Mettez sous tension les ordinateurs.

Opération

Le mode Raccourci clavier (Hotkey) CS1742 / CS1744 permet d'installer

aisément le commutateur KVM depuis le clavier.

Remarque : Si la touche Arr. déf. entre en conﬂ it avec d'autres

programmes actifs, utilisez la touche Ctrl.

1. Activation du mode Raccourcis clavier :

Appuyez deux fois sur la touche [Arr. déf] ou [Ctrl]

2. Fonction des raccourcis clavier :

Raccourcis clavier Action

[Arr. déf.]

[Entrée] Centre l’activité du KVM + son + périphérique

sur le port suivant

[n] [Entrée] Centre l’activité du KVM + son + périphérique

sur le port n

[n] [K] [Entrée] Centre l’activité du KVM sur le port n

[n] [U] [Entrée] Bascule le périphérique vers le port n

[n] [S] [Entrée] Bascule le son vers le port n

[n] [K] [U]

[Entrée]

Centre l’activité du KVM + périphérique sur le

port n

[n] [K] [S]

[Entrée] Centre l’activité du KVM + son sur le port n

[n] [U] [S]

[Entrée] Bascule le son + périphérique vers le port n

[n] [K] [U] [S]

[Entrée]

Centre l’activité du KVM + son + périphérique

sur le port n

[K] [Entrée] Centre l’activité du KVM sur le port suivant

[U] [Entrée] Bascule le périphérique vers le port suivant

[S] [Entrée] Bascule le son vers le port suivant

[A] [Entrée] Démarre la fonction Recherche automatique à

des intervalles de 5 secondes (par défaut)

[A] [n] [Entrée] Démarre la fonction Recherche automatique à

des intervalles de n secondes

[n] correspond à un nombre compris entre 1 et 4, sauf pour la recherche

automatique où il correspond à un délai en secondes compris entre 1 et

99.

[K] représente la sélection du KVM

[U] représente le périphérique USB

[S] représente les haut-parleurs et le microphone

[A] représente la fonction Recherche automatique

Reportez-vous au manuel d'utilisation qui contient la liste complète des

fonctions des raccourcis clavier.

Commutation manuelle

Pour la sélection de port manuelle :

• Appuyez une fois sur un bouton de sélection de port pour transférer

le contrôle KVM, audio et USB à l'ordinateur connecté au port

correspondant.

• Appuyez sur un bouton de sélection de port et maintenez-le enfoncé

pendant plus de 2 secondes pour transférer uniquement le contrôle

KVM à l’ordinateur connecté au port correspondant.

• Appuyez simultanément sur les boutons de sélection de port 1 et 2 et

maintenez-les enfoncés pendant 2 secondes pour activer le mode de

commutation automatique.

CS1742/CS1744 Guide de mise en route rapide du commutateur KVM 2/4-Port Dual-View www.aten.com

Hardwareübersicht

Vorderseitige Ansicht

1. Anschlusswahlschalter

2. Anschluss-LEDs

3. USB-Port

Rückseitige Ansicht

1. Stromeingangsbuchse

2. Abschnitt zur Firmwareaktualisierung

3. Konsolportabschnitt

4. CPU-Portauswahl

5. USB-Port

Hardware installieren

1. Schließen Sie Ihre Konsolgeräte (USB-Tastatur, USB-Maus, Monitor,

Mikrofon und Lautsprecher) an die Konsolports des Switch an.

2. Verbinden Sie einen beliebigen freien CPU-A-Port mit dem ersten VGA-

Port und dem USB-Port des Computers, der installiert werden soll.

Verwenden Sie dazu das Port A KVM-Kabel in Grun (das mit dem USB-

Stecker).

3. Verbinden Sie einen beliebigen freien CPU-B-Port mit dem zweiten

VGA-Port und den Audio-Buchsen des Computers, der installiert

werden soll. Verwenden Sie dazu das Port B KVM-Kabel in der orange

(das mit den Mikrofon- und Lautsprecher-Steckern).

Hinweis: Achten Sie darauf, dass Sie das Port B-Kabel mit demselben

CPU-Port wie das Port A-Kabel verbinden (also beide an Port

1, beide an Port 2 usw.).

4. Verbinden Sie Ihre USB-Peripheriegeräte mit den USB-Ports auf der

Vorder- und Rückseite.

5. Wenn Sie eine externe Stromversorgung verwenden möchten, schließen

Sie das Kabel des Netzteils an die Stromeingangsbuchse des Switch

an und verbinden das Netzteil anschließend mit einer stromführenden

Steckdose.

Hinweis: Das Netzteil muss für 5V 2,6A Gleichstrom ausgelegt sein

und den positiven Pol in der Mitte aufweisen (Masse außen):

6. Schalten Sie Ihre Computer ein.

Bedienung

Dank der Hotkey-Funktionen können Sie den CS1742 / CS1744 bequem

über die Tastatur steuern.

Hinweis: Wenn die Taste Rollen mit anderen Programmen in Konﬂ ikt

gerät, können Sie anstelle die Taste Strg verwenden.

1. Hotkey-Modus aktivieren:

Drücken Sie zweimal die Taste [Rollen] oder [Strg].

2. Hotkey-Funktionen im Detail:

Hotkeys Aktion

[Rollen]

[Enter] Schaltet KVM-Fokus + Audio + Peripheriegerät

auf den nächsten Port

[n] [Enter] Schaltet KVM-Fokus + Audio + Peripheriegerät

auf den Port n

[n] [K] [Enter] Schaltet den KVM-Fokus auf Port n

[n] [U] [Enter] Schaltet das Peripheriegerät auf Port n

[n] [S] [Enter] Schaltet die Audiogeräte auf Port n

[n] [K] [U]

[Enter]

Schaltet den KVM-Fokus + Peripheriegerät auf

Port n

[n] [K] [S] [Enter] Schaltet den KVM-Fokus + Audio auf Port n

[n] [U] [S] [Enter] Schaltet das Audiogerät + Peripheriegerät auf

Port n

[n] [K] [U] [S]

[Enter]

Schaltet KVM-Fokus + Audio + Peripheriegerät

auf den Port n

[K] [Enter] Schaltet den KVM-Fokus auf den nächsten Port

[U] [Enter] Schaltet das Peripheriegerät auf den nächsten

Port

[S] [Enter] Schaltet das Audiogerät auf den nächsten Port

[A] [Enter] Startet die automatische Suchfunktion mit einer

Intervalldauer von 5 Sekunden (Standard)

[A] [n] [Enter] Startet die automatische Suchfunktion mit einer

Intervalldauer von n Sekunden

[n] steht für eine Zahl zwischen 1 und 4, außer bei der Autoscan-Funktion,

wo sie für eine Zeit zwischen 1 und 99 Sekunden steht

[K] steht für den KVM-Fokus

[U] steht für das USB-Gerät

[S] steht für Lautsprecher und Mikrofon

[A] steht für die automatische Suchfunktion

Ein vollständige Liste der Hotkey-Funktionen ﬁ nden Sie im

Benutzerhandbuch.

Manuelle Portumschaltung

Manuelle Portauswahl:

• Drücken Sie eine Portauswahltaste einmal, um die KVM-, Ton- und USB-

Signale auf den Computer dieses Ports umzuleiten.

• Halten Sie einen Port-Auswahlschalter länger als 2 Sekunden gedrückt,

um nur die KVMSteuerung auf den Computer des betreffendes Ports

umzuleiten.

• Um die automatische Portumschaltung zu starten, halten Sie gleichzeitig

die Tasten 1 und 2 mindestens 2 Sekunden lang gedrückt.

CS1742/CS1744 2/4-Port Dual-View-KVM-Switch Kurzanleitung www.aten.com

Presentación del hardware

Vista frontal

1. Conmutadores de selección de puertos

2. Indicadores LED de los puertos

3. Puerto USB

Vista posterior

1. Entrada de alimentación

2. Sección para actualizaciones del ﬁ rmware

3. Sección de puertos de consola

4. Sección de puertos CPU

5. Puerto USB

Instalar el hardware

1. Conecte sus dispositivos de consola (teclado USB, ratón USB, monitores,

micrófono y altavoces) a los puertos de consola del concentrador.

2. Utilice el cable KVM Port A en verde (el que tiene el conector USB) para

conectar cualquiera de los puertos CPU A libre al primer puerto VGA y

puerto USB del ordenador que quiera instalar.

3. Utilice el cable KVM Port B en naranja (el que tiene los conectores para

micrófono y altavoces) para conectar cualquiera de los puertos CPU B

libre al segundo puerto VGA y a los puertos de audio del ordenador

que quiera instalar.

Nota: Conecte el cable Port B al mismo puerto de CPU que el cable

Port A (es decir, los dos al puerto 1, los dos al puerto 2, etc.).

4. Conecte los periféricos USB a los puertos USB ubicados en los paneles

anterior y posterior.

5. Si desea utilizar una alimentación externa, conecte la fuente de

alimentación a la entrada de alimentación del concentrador y luego la

fuente a una toma eléctrica.

Nota: El adaptador de alimentación debe ser de 5V c.c., 2,6A con el

polo positivo en el interior y el negativo en el exterior:

6. Encienda los ordenadores.

Operación

La función de teclas de acceso directo permite controlar al CS1742 /

CS1744 y toda la instalación KVM a través del teclado.

Nota: Si la tecla BloqDespl es utilizada por otros programas instalados y

ea conﬂ ictos, puede emplear la tecla Ctrl en su lugar.

1. Para activar el modo de las teclas de acceso directo:

Pulse dos veces la tecla [BloqDespl] o [Ctrl].

2.. Funciones de las teclas de acceso directo en detalle:

Teclas de acceso directo Acción

[BloqDespl]

[Intro] Cambia el foco KVM + Audio + Periférico al

puerto siguiente

[n] [Intro] Cambia el foco KVM + Audio + Periférico al

puerto n

[n] [K] [Intro] Cambia el foco KVM al puerto n

[n] [U] [Intro] Cambia el periférico al puerto n

[n] [S] [Intro] Cambia el audio al puerto n

[n] [K] [U] [Intro] Cambia el foco KVM + Periférico al puerto n

[n] [K] [S] [Intro] Cambia el foco KVM + Audio al puerto n

[n] [U] [S] [Intro] Cambia el Audio + Periférico al puerto n

[n] [K] [U] [S]

[Intro]

Cambia el foco KVM + Audio + Periférico al

puerto n

[K] [Intro] Cambia el foco KVM al puerto siguiente

[U] [Intro] Cambia el periférico al puerto siguiente

[S] [Intro] Cambia el audio al puerto siguiente

[A] [Intro] Inicia la búsqueda automática con un intervalo

de 5 segundos (por defecto)

[A] [n] [Intro] Inicia la búsqueda automática con un intervalo

de n segundos

[n] representa un número cualquiera entre 1 y 4, excepto para la función

de búsqueda automática, donde representa entre 1 a 99 segundos

[K] representa el foco KVM

[U] representa el dispositivo USB

[S] representa los altavoces y al micrófono

[A] representa la función de búsqueda automática

Para una lista completa de todas las teclas de acceso directo, véase el

manual del usuario.

Conmutación manual

Selección manual de puertos:

• Pulse una vez un conmutador de selección de puerto para pasar el

control KVM, la señal USB y la de audio al ordenador conectado al

puerto correspondiente.

• Mantenga pulsado un conmutador de selección de puertos durante

más de 2 segundos para pasar solamente el control KVM al ordenador

conectado al puerto correspondiente.

• Mantenga pulsados los botones de selección de puerto 1 y 2

simultáneamente durante 2 segundos para iniciar el modo de

conmutación automática.

CS1742/CS1744 Conmutador KVM Dual-View de 2/4-Puertos Guía rápida www.aten.com

2 3

4or

AA UUTTOO SSCCAA NN

CONSOLE

3 B

3 A

4 B

4 A

CPU 4 CPU 3

1 B

1 A

2 B

2 A

CPU 2 CPU 1

AAUUTT OO SS CCAA NN

1 2

CONSOLE

1 B

1 A

2 B

2 A

CPU 2 CPU 1

2 3 4

1 2 3 4

CONSOLE

3 B

3 A

4 B

4 A

CPU 4 CPU 3

1 B

1 A

2 B

2 A

CPU 2 CPU 1

AAUU TTOO SSCCAANN

1 2

CS1742 Front View

CS1744 Front View

CS1742 Rear View

CS1744 Rear View

Important Notice

Considering environmental protection, ATEN does not provide a fully

printed user manual for this product. If the information contained in the

Quick Start Guide is not enough for you to conﬁ gure and operate your

product, please visit our website www.aten.com, and download

the full user manual.

Online Registration

http://eservice.aten.com

Technical Phone Support

International:

886-2-86926959

All information, documentation, firmware, software utilities, and

speciﬁ cations contained in this package are subject to change without

prior notification by the manufacturer. Please visit our website http://

www.aten.com/download/?cid=dds for the most up-to-date versions.

EMC Information

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT:

This equipment has been tested and found to comply with the limits for a Class B

digital service, pursuant to Part 15 of the FCC rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. Any

changes or modiﬁ cations made to this equipment may void the user s authority to

operate this equipment. This equipment generates, uses, and can radiate radio frequency

energy. If not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

- Reorient or relocate the receiving antenna;

- Increase the separation between the equipment and receiver;

- Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected;

- Consult the dealer/an experienced radio/television technician for help.

FCC Caution: Any changes or modiﬁ cations not expressly approved by the party

responsible for compliance could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:(1) this device mat not cause harmful interference, and(2) this device

must accept any interference received, including interference that may cause undesired

operation.

The following contains information that relates to China:

North America:

1-888-999-ATEN Ext: 4988

United Kingdom:

44-8-4481-58923

AHardware Review

CS1742/CS1744 Guida rapida dello switch KVM Dual View a 2/4-Porte

CS1742/CS1744 2/4 포트Dual-View KVM 스위치 빠른 사용 가이드

Hardware

Lato anteriore

1. Interruttori di selezione della porta

2. LED delle porte

3. Porta USB

Lato posteriore

1. Presa d’alimentazione

2. Sezione per l’aggiornamento del ﬁ rmware

3. Sezione della porta di collegamento alla console

4. Sezione delle porte di collegamento alle CPU

5. Porta USB

Installazione dell’hardware

1. Inserire la spina dei dispositivi della console (tastiera USB, mouse USB,

monitor, microfono ed altoparlanti) nelle porte per la console dello

switch.

2. Utilizzare il cavo KVM Port A nel verde (quello con il connettore USB)

per collegare una qualsiasi delle porte A per il collegamento della CPU

disponibili alla prima porta VGA ed alla porta USB del computer che si

sta installando.

3. Utilizzare il cavo KVM Port B in ar ancio (quello con i connettori per

microfono ed altoparlante) per collegare la porta B per il collegamento

하드웨어 리뷰

정면도

1. 포트 선택 스위치

2. 포트 LED

3. USB 포트

후면도

1. 파워 잭

2. 펌웨어 업그레이드 부분

3. 콘솔 포트 부분

4. CPU 포트 부분

5. USB 포트

하드웨어 설치

1. 콘솔 디바이스(USB 키보드 및 마우스, 마이크로폰 및 스피커)를

콘솔 포트에 연결한다.

2. 녹색인 포트 A KVM 케이블(USB 커넥터가 있는)을 사용하여CPU A

포트와 설치코자 하는 컴퓨터의 VGA 포트 및 USB 포트에 연결한다.

3.오렌지색인 포트 B KVM 케이블(마이크로폰 및 스피커 커넥터가

della CPU alla seconda porta VGA ed alle prese audio del computer che

si sta installando.

Nota: Accertarsi che il cavo della porta B si trovi sulla stessa porta per il

collegamento della CPU del cavo Port A– entrambi sulla porta 1,

entrambi sulla porta 2, ecc.

4. Collegare le periferiche USB alle porte USB poste sui pannelli anteriore

e posteriore.

5. Se si decide di utilizzare l’alimentazione di rete, inserire il cavo

dell’alimentatore nella presa d’alimentazione dello switch, quindi

inserire l’alimentatore in una presa di corrente.

Nota: L’alimentatore deve essere CC5V 2.6A con l’interno positivo e

l’esterno negativo:

6. Accendere i computer.

Funzionamento

La funzione Tasti di scelta rapida del CS1742/CS1744 consente di

controllare l’installazione KVM dalla tastiera in maniera rapida e semplice.

Nota: Se l’impiego del tasto Bloc Scorr entra in conﬂ itto con altri

programmi in uso sul computer, è possibile utilizzare il tasto Ctrl.

1. Modalità di richiesta tasto di scelta rapida:

Premere [Bloc Scorr] o [Ctrl] due volte

2. Funzionamento dettagliato dei tasti chiave:

있는)을 CPU B 포트와 설치코자 하는 컴퓨터의 두 번째 VGA 포트,

오디오 잭에 연결한다.

주의: 포트 B 케이블이 CPU 포트와 포트 케이블이 같은지 확인

한다. — 둘 다 포트1 혹은 둘 다 포트 2.

4. USB 주변기기를 앞면과 뒷면에 있는 USB포트에 연결한다.

5. 만약 외부 전원을 사용코자 하면, 파워 아답터을 연결한다.

주의: 파워 아답터는 DC5V 2.6A의 적정 아답터를 사용한다.

6. 컴퓨터의 전원을 켠다.

사용설명

CS1742 / CS1744 핫키 기능은 키보드를 사용하여 KVM 스위치를

사용하는데 편리함을 제공한다.

주의: 만약 Scroll Lock키가 다른 프로그램과 충돌 되면 Ctrl 키를

사용하면 됨.

1. 핫키 모드 들어가기:

[Scroll Lock] 또는 [Ctrl]키를 두 번 연속해서 누른다.

2. 자세한 핫키 사용방법

Tasti chiave Azione

[Bloc Scroll]

[Invio] Sposta KVM + Audio + periferica alla porta

[n] [Invio] Sposta KVM + Audio + periferica alla porta n

[n] [K] [Invio] Sposta KVM alla porta n

[n] [U] [Invio] Sposta la periferica alla porta n

[n] [S] [Invio] Sposta l’audio alla porta n

[n] [K] [U] [Invio] Sposta KVM + periferica alla porta n

[n] [K] [S] [Invio] Sposta KVM + audio alla porta n

[n] [U] [S] [Invio] Sposta audio + periferica alla porta n

[n] [K] [U] [S]

[Invio] Sposta KVM + Audio + periferica alla porta n

[K] [Invio] Sposta KVM alla porta successiva

[U] [Invio] Sposta la periferica alla porta successiva

[S] [Invio] Sposta l’audio alla porta successiva

[A] [Invio] Dà inizio alla funzione di scansione automatica

ad intervalli di 5 secondi (predeﬁ niti)

[A] [n] [Invio] Dà inizio alla funzione di scansione automatica

ad intervalli di n secondi

핫 키 동작상태

[Scoll

Lock]

[Scoll

Lock]

[Enter] 컴퓨터,오디오, USB 허브가 현재 사용중인 포

트에서 다음 포트로 모두 변환 된다.

[n] [Enter] 컴퓨터,오디오, USB 허브가 모두 포트[n]으로

변환된다.

[n] [K] [Enter] 컴퓨터 포트만 포트[n]으로 변환 된다.

[n] [U] [Enter] USB 허브만 포트[n]으로 변환 된다.

[n] [S] [Enter] 오디오 포트만 포트[n]으로 변환 된다.

[n] [K] [U]

[Enter] 컴퓨터와 USB 허브만 포트[n]으로 변환 된다.

[n] [K] [S]

[Enter]

컴퓨터와 오디오 포트만 포트[n]으로 변환 된

다.

[n] [U] [S]

[Enter] 오디오와 USB 허브만 포트[n]으로 변환 된다.

[n] [K] [U] [S]

[Enter]

컴퓨터,오디오, USB허브 모두가 포트[n]으로

변환 된다.

[K] [Enter] 컴퓨터만 다음 포트로 변환 된다.

[U] [Enter] USB 허브만 다음 포트로 변환 된다.

[S] [Enter] 오디오만 다음 포트로 변환 된다.

[A] [Enter] Auto Scan 기능이 실행된다. (5초 간격으로 설

정되어 있음)

[A] [n] [Enter] Auto Scan 기능이[n]초 간격으로 실행 된다.

[n] rappresenta un numero qualsiasi fra 1 e 4, eccetto che nella funzione

Scansione automatica dove indica un numero da 1 a 99 secondi.

[K] rappresenta il KVM

[U] rappresenta il dispositivo USB

[S] rappresenta gli altoparlanti ed il microfono

[A] rappresenta la funzione di Scansione automatica

Per un elenco completo dei tasti chiave, fare riferimento al manuale

dell’utente.

Commutazione manual

Selezione manuale della porta:

• Premere il pulsante di selezione della porta una volta per spostare il

KVM, l’audio e l’USB sul computer connesso alla porta corrispondente.

• Premere e tenere premuto il pulsante di selezione della porta per più

di due sec per spostare solo il KVM sul computer connesso alla porta

corrispondente.

• Premere e tenere premuti i pulsanti 1 e 2 di selezione della porta

contemporaneamente per 2 secondi per attivare la Modalità Scansione

automatica.

•

[n] 포트는 1-4까지, Auto Scan은 1-99사의의 숫자를 의미함.

[K] KVM스위치의 포트를 의미함.

[U] USB 허브를 의미함.

[S] 스피커와 마이크로폰을 의미함.

[A] Auto Scan 기능을 의미함.

더 자세한 핫키 리스트와 핫키 사용 방법은 사용자 매뉴얼을 참조

바랍니다.

수동 스위칭

수동 포트 선택

• 포트 선택 버튼을 1번 누르면 KVM, 오디오, USB 사용권한을

일치하는 포트에 연결된 컴퓨터로 가 져옵니다.

• 포트 선택 버튼을 2초 이상 누르면 KVM 사용 권한만을 일치하는

포트에 연결된 컴퓨터로 가져옵니다.

• 포트 선택 버튼 1,2번을 동시에 2초 동안 누르고 있으면 오토 스캔

모드를 시작합니다.

Important Notice

Considering environmental protection, ATEN

does not provide a fully printed user manual

for this product. If the information contained

in the Quick Start Guide is not enough for

you to configure and operate your product,

please visit our website www.aten.com, and

download the full user manual.

Online Registration

http://eservice.aten.com

Technical Phone Support

International:

886-2-86926959

North America:

1-888-999-ATEN Ext: 4988

United Kingdom:

44-8-4481-58923

The following contains information that relates

to China:

www.aten.com

www.aten.com Phone: 02-467-6789

Package Contents

1 2-Port USB Dual-View

KVMP™ Switch

2 KVM Cables (Audio/

Video)

2 KVM Cables (USB/Video)

1 Firmware Upgrade Cable

1 User Instructions

Hardware Installation

2 3

4or

AAUUTTOO SS CC AA NN

CONSOLE

3 B

3 A

4 B

4 A

CPU 4 CPU 3

1 B

1 A

2 B

2 A

CPU 2 CPU 1

AAUUTT OO SS CCAA NN

1 2

CONSOLE

1 B

1 A

2 B

2 A

CPU 2 CPU 1

2 3 4

1 2 3 4

CONSOLE

3 B

3 A

4 B

4 A

CPU 4 CPU 3

1 B

1 A

2 B

2 A

CPU 2 CPU 1

AAUU TTOO SSCCAANN

1 2

CONSOLE

1 B

1 A

2 B

2 A

CPU 2 CPU 1

2 3 4

1 2 3 4

CONSOLE

3 B

3 A

4 B

4 A

CPU 4 CPU 3

1 B

1 A

2 B

2 A

CPU 2 CPU 1

AAUU TTOO SSCCAANN

1 2

CS1742 Front View CS1744 Front View

CS1742 Rear View CS1744 Rear View

AHardware Review

ATEN CS1742 Guida Rapida

Marca: ATEN

Modello: CS1742

Tipo: Guida Rapida

Scarica il pdf

rapporto

in altre lingue

français: ATEN CS1742 Guide de démarrage rapide
español: ATEN CS1742 Guía de inicio rápido
Deutsch: ATEN CS1742 Schnellstartanleitung

ATEN CS1742 Guida Rapida

ATEN CS1742 Guida Rapida

in altre lingue

Documenti correlati