Swann SWIFI-2KOCAM Guida utente

Marca: Swann

Modello: SWIFI-2KOCAM

Tipo: Guida utente

╗ນ჋Ꭲⲛ኶㠇٣ṯ䶶࣒୞

UJGP\JGP"CQPK"GNGEVTQPKE"EQ0."NVF

HQTOCV

⦮ Ẓ

ᵋ ẅ

DATE

⌺۱

CRRTQXGF

᧟ ब

䃧⎨

207

䄸 ᘌ

207

਎ᴪ12 ᒪᴾᰛ

207oo

Ꭰ ፞ ࣒ ᕔ

Ꭰ"""፞

207oo

ڳ ᳖

䇦 Ӂ

ጇ ᾞ

EJGEMGF

FTCYP

জ ๤

䌤䌇

FGUKIPGF

z"1"z"0"z

z"0"zz

3"<"3 42442928

ଡ଼ࢮ㫉䶮Ὑ

KREaG;9FL7LaUycppa

凷凒䯯aᝑ䞅ᩭઽ媓࣎⭩⦮媔

62832G;9F2224

Ꭰ፞媥366,324oo

፧仈 ፧ᗻ

ገᦝ⦮Ẓଢ଼媥SUI4MQECOXGT37N

34:iଲ䱂a6㧘૖ঝa

䜭ࢯ␟a54Ra凷凒䯯a

TqJU

ధ୳

᳿ଢ଼

2K Outdoor Wi-Fi Spotlight Camera

Cámara 2K con reﬂector Wi-Fi para exteriores

2K Caméra de projecteur Wi-Fi extérieure

Telecamera esterno con illuminazione Wi-Fi 2K

2K WLAN-kamera den Außenbereich

EN QUICK START GUIDE ES GUÍA DE INICIO RÁPIDO FR GUIDE DE DÉMARRAGE RAPIDE

IT GUIDA RAPIDA DE SCHNELLSTARTANLEITUNG

SWIFI-2KOCAM

EN © Swann Communications 2022

QSGS2KOCAMVER15L

FCC STATEMENT

This equipment has been tested and found to comply with the limits for Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following

measures: • Reorient or relocate the receiving antenna • Increase the separation between the

equipment and the receiver • Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected • Consult the dealer or an experienced radio/TV technician

for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

FCC RF Radiation Exposure Statement Caution: To maintain compliance with the FCC’s RF exposure

guidelines, place the product at least 20cm from nearby persons.

WARNING: Modifications not approved by the party responsible for compliance could void user’s

authority to operate the equipment.

IC STATEMENT

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject

to the following two conditions: (1) this device may not cause interference, and (2) this device

must accept any interference, including interference that may cause undesired operation of the

device.

The device is compliance with RF field strength limits, users can obtain Canadian information on

RF exposure and compliance.

This Class B digital apparatus complies with Canadian ICES-003. This equipment complies with

IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be

installed and operated with minimum distance 20cm between the radiator & your body.

Déclaration IC

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio

exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil

ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage

radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Le présent appareil est conforme de ce matériel aux conformités ou aux limites d’intensité de

champ RF, les utilisateurs peuvent sur l’exposition aux radiofréquences et la conformité d’acquérir

les informations correspondante.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Déclaration

d’exposition aux radiations : Cet équipement est conforme aux limites d’exposition aux

rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé

et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

UK DECLARATION OF CONFORMITY

Hereby, Swann Communications declares that this product is in compliance with the requirements

for UKCA marking. The Declaration of Conformity can be obtained at uk.swann.com/compliance

RECYCLING

This product should not be disposed with other household wastes throughout the EU. To prevent

possible harm to the environment or human health from uncontrolled waste disposal, recycle it

responsibly to promote the sustainable reuse of material resources. To return your used device,

please use the return and collection systems or contact the retailer where the product was

purchased. They can take this product for environment safe recycling.

2K Outdoor Wi-Fi Spotlight Camera

Cámara 2K con reflector Wi-Fi para exteriores

2K Caméra de projecteur Wi-Fi extérieure

Telecamera esterno con illuminazione Wi-Fi 2K

2K WLAN-kamera den Außenbereich

EN QUICK START GUIDE ES GUÍA DE INICIO RÁPIDO FR GUIDE DE DÉMARRAGE RAPIDE

IT GUIDA RAPIDA DE SCHNELLSTARTANLEITUNG

SWIFI-2KOCAM

CAMERA OVERVIEW

Night detection

sensor

Microphone

LED indicator

Passive infrared

motion sensor

Ethernet

connector

4 interchangeable plug adapters

Power LED

Universal Power over Ethernet (PoE) Adapter

(supplies power to camera using Ethernet cable)

Spotlight Reset (Pair)

button

Speaker

(bottom)

Infrared LEDs

(for night vision)

Ethernet connector

CONNECT THE CAMERA

1 Connect the camera to the port labelled "CAM" on the bottom of the Power over Ethernet (PoE)

adapter using the supplied Ethernet cable.

2 Attach the appropriate plug adapter to the PoE adapter then plug the PoE adapter into a wall

outlet. Make sure the camera is within range of the Wi-Fi network to which you want to connect.

LAN1WAN LAN2 LAN3 LAN4

Ethernet cable

Ethernet cable to router (not supplied)

PoE Adapter

(Optional) The LAN port

provides the option of a wired

connection to your router as

backup (when Wi-Fi network

is unstable). Camera must

first be paired to your Wi-Fi

network via app. Remove

yellow sticker before use.

Select adapter that corresponds to

your country. To attach, place adapter

on the prongs and slide down until it

clicks into place on the PoE adapter.

To remove, press the "PUSH" button

and slide adapter out.

GET THE SWANN SECURITY APP

1 Download the latest version of the Swann Security app from the Apple App Store® or Google

Play™ Store on your iOS or Android device. Simply search for "Swann Security".

2 Open the app and create your Swann Security account by tapping “Not yet registered? Sign Up” on

the screen. Then, activate your Swann Security account by confirming the verification email that is

sent to the registered email address.

SET UP THE CAMERA

Launch the Swann Security app and sign in. Tap the Pair Device button on the screen (or tap the menu

icon in the top left and select “Pair Device”). The app will now guide you through the pairing process

to set up the camera with your Wi-Fi network.

Before you begin, have the camera powered close to your router and get your Wi-Fi network password

ready. Please note that the camera is only compatible with the 2.4GHz network. If your router is using

the 5GHz band, please ensure it is operating in mixed mode.

• The camera can be easily mounted on a flat surface using the included screws (and wall plugs).

• Choose a location with strong, reliable Wi-Fi reception to ensure best video streaming

performance. The easiest way to check is to use your smartphone. Connect your smartphone to

your Wi-Fi network at the spot you have chosen and see if you get 2 bars of Wi-Fi signal or more.

• As a general rule, the nearer the camera is to your router, the better the wireless connection

quality. If you’re finding the Wi-Fi signal to be weak or out of range at the location where you

intend to mount the camera, consider installing a Wi-Fi range extender to boost the Wi-Fi

coverage of your existing network or you can try connecting an Ethernet cable from the "LAN"

port of the PoE adapter directly to your router for a more reliable wired connection.

MOUNT THE CAMERA

Adjusting the viewing angle

Loosen the locking ring to pan, tilt and rotate the camera. Tighten

the locking ring back securely to lock the camera’s position in

place after adjustment.

WARNING: DO NOT APPLY TOO MUCH FORCE WHEN TIGHTENING

THE LOCKING RING, AS THIS MAY DAMAGE THE JOINT.

If mounting to a wooden surface, screw the camera directly

to the surface. If mounting to a masonry surface (bricks,

concrete), insert wall plugs before screwing the camera to

the surface. Tighten enough to secure the camera in place.

Make sure to remove the protective film covering the camera lens

once installation is complete.

󼵡

󼷅󽶴󼶳󽶵󽶲󽶴󽶲





󽶴