ESAB Caddy Arc 150i Manuale utente
- Categoria
- Sistema di saldatura
- Tipo
- Manuale utente
Questo manuale è adatto anche per
Valid for serial no. 620--xxx--xxxx0459 263 127 060523
Arc 150i
Caddyt A34
Instruction manual Èíñòðóêöèÿ ïî ýêñïëóàòàöèè
Ðóññêèé 1.........................................................
ENGLISH 14....................................................
Ðóññêèé
TOCr
-- 1 --
1 ÒÅÕÍÈÊÀ ÁÅÇÎÏÀÑÍÎÑÒÈ 2........................................
2 ÂÂÅÄÅÍÈÅ 4.......................................................
2.1 Îáîðóäîâàíèå 4...........................................................
3 ÒÅÕÍÈ×ÅÑÊÈÅ ÕÀÐÀÊÒÅÐÈÑÒÈÊÈ 4................................
4ÓÑÒÀÍÎÂÊÀ 5.......................................................
4.1 Ðàçìåùåíèå 5.............................................................
4.2 Ïàñïîðò íàÿ òàáëè÷êà 5.....................................................
4.3 Ñåòü ýëåêòðîïèòàíèÿ 5.....................................................
5 ÏÎÐßÄÎÊ ÐÀÁÎÒÛ 6...............................................
5.1 Ñîåäèíåíèÿ è óñòðîéñòâà óïðàâëåíèÿ 6.....................................
5.2 Ïðèñîåäèíåíèå ñâàðî÷íîãî è îáðàòíîãî êàáåëåé 6..........................
5.3 Ïàíåëü óïðàâëåíèÿ A34 6...................................................
5.4 Ïàðàìåòðû 8..............................................................
5.5 Çàùèòà îò ïåðåãðåâà 8.....................................................
5.6 Ñâàðêà ìåòîäîì ÌMA 8....................................................
5.7 Ñâàðêà ìåòîäîì TIG 9.....................................................
5.8 Áëîê äèñòàíöèîííîãî óïðàâëåíèÿ 10.........................................
6 ÒÅÕÍÈ×ÅÑÊÎÅ ÎÁÑËÓÆÈÂÀÍÈÅ 10.................................
6.1 Ïðîâåðêà è ÷èñòêà 10.......................................................
6.2 Î÷èñòêà ïðîòèâîïûëåâîãî ôèëüòðà 11.......................................
7 ÂÛßÂËÅÍÈÅ ÍÅÈÑÏÐÀÂÍÎÑÒÅÉ 11.................................
7.1 Êîä îøèáêè 12..............................................................
8 ÇÀÊÀÇ ÇÀÏÀÑÍÛÕ ×ÀÑÒÅÉ 13.......................................
ÑÕÅÌÀ 26..............................................................
ÍÎÌÅÐ ÇÀÊÀÇÀ 28.....................................................
ÑÏÈÑÎÊ ÇÀÏÀÑÍÛÕ ×ÀÑÒÅÉ 29........................................
ÄÎÏÎËÍÈÒÅËÜÍÛÅ ÏÐÈÍÀÄËÅÆÍÎÑÒÈ 30...........................
bh26d1r -- 2 --
1 ÒÅÕÍÈÊÀ ÁÅÇÎÏÀÑÍÎÑÒÈ
Ïîëüçîâàòåëè ñâàðî÷íîãî îáîðóäîâàíèÿ ESAB îòâå÷àþò çà âûïîëíåíèå ïðàâèë òåõíèê è
áåçîïàñíîñòè ëèöàìè, ðàáîòàþùèìè íà îáîðóäîâàíèè è ðÿäîì ñ íèì. Ïðàâèëà òåõíèêè
áåçîïàñíîñòè äîëæíû îòâå÷àòü òðåáîâàíèÿì ê áåçîïàñíîé ýêñïëóàòàöèè ñâàðî÷íîãî
îáîðóäîâàíèÿ ýòîãî òèïà. Ïîìèìî ñòàíäàðòíûõ ïðàâèë òåõíèêè áåçîïàñíîñòè è îõðàíû
òðóäà íà ðàá î÷åì ìåñòå ðåêîìåíäóåòñÿ ñëåäóþùåå.
Âñå ðàáîòû äîëæíû âûïîëíÿòüñÿ ïîäãîòîâëåííûìè ëèöàìè, çíàêîìûìè ñ ýêñïëóàòàöèåé
ñâàðî÷íîãî îáîðóäîâàíèÿ. Íåïðàâèëüíàÿ ýêñïëóàòàöèÿ îáîðóäîâàíèÿ ìîæåò âûçâàòü
îïàñíûì ñèòóàöèè, ïðèâîäÿùèå ê òðàâìèðîâàíèþ ïåðñîíàëà è ïîâðåæäåíèþ
îáîðóäîâàíèÿ.
1. Bñå ëèöà, èñïîëüçóþùèå ñâàðî÷íîå îáîðóäîâàíèå, äîëæíû çíàòü:
S èíñòðóêöèè ïî ýêñïëóàòàöèè
S ðàñïîëîæåíèå îðãàíîâ àâàðèéíîãî îñòàíîâà
S íàçíà÷åíèå îáîðóäîâàíèÿ
S ïðàâèëà òåõíèêè áåçîïàñíîñòè
S òåõíîëîãèþ ñâàðêè
2. Îïåðàòîð îáåñïå÷èâàåò:
S óäà ëåíèå ïîñòîðîííèõ ëèö èç ðàá î÷åé çîíû îáîðóäîâàíèÿ ïðè åãî çàïóñêå
S çàùèòó âñåõ ëèö îò â îçäåéñòâèÿ ñâàðî÷íîé äóãè
3. Ðàáî÷åå ìåñòî äîëæíî:
S îòâå÷àòü óñëîâèÿì ýêñïëóàòàöèè
S íå èìåòü ñêâîçíÿêîâ
4. Ñðåäñòâà çàùèòû ïåðñîíàëà
S Âî âñåõ ñëó÷àÿõ ðåêîìåíäóåòñÿ èñïîëüçîâàòü èíäèâèäóàëüíûå ñðåäñòâà çàùèòû,
íàïðèìåð, çàùèòíûå î÷êè, îãíåñòîéêóþ ñïåöîäåæäó è çàùèòíûå ðóêàâèöû.
S Ïðè ñâàðêå çàïðåùàåòñÿ íîñèòü ñâîáîäíóþ îäåæäó, óêðàøåíèÿ è ò.ä., íàïðèìåð,
øàðôû, áðàñëåòû, êîëüöà, êîòîðûå ìîãóò ïîïàñòü â ñâàðî÷íîå îáîðóäîâàíèå èëè
âûçâàò ü îæîãè.
5. Îáùèå ìåðû ïðåäîñòîðîæíîñòè
S Ïðîâåðüòå íàäåæíîñòü ïîäêëþ÷åíèÿ îáðàòíîãî êàáåëÿ.
S Ðàáîòû íà îáîðóäîâàíèè ñ âûñîêèì íàïðÿæåíèåì äîëæíû ïðîèçâîäèòüñÿ
òîëüêî êâàëèôèöèðîâàííûì ýëåêòðèêîì.
S Â ïðåäåëàõ äîñòóïà äîëæíû íàõîäèòüñÿ ñîîòâåòñòâóþùèå ñðåäñòâà
ïîæàðîòóøåíèÿ, èìåþùèå ÿñíóþ ìàðêèðîâêó.
S Çàïðåù àåòñÿ ïðîâîäèòü ñìàçêó è òåõíè÷åñêîå îáñëóæèâàíèå îáîðóäîâàíèå âî
âðåìÿ ýêñïëóàòàöèè.
bh26d1r -- 3 --
Ïåðåä íà÷àëîì ìîíòàæà è ýêñïëóàòàöèè âíèìàòåëüíî èçó÷èòå ñîîòâåòñòâóþùèå èíñòðóêöèè.
ÇÀÙÈÒÈÒÅ ÑÅÁß È ÄÐÓÃÈÕ!
ÎÑ ÒÎÐÎÆÍÎ!
ÄÓÃÎÂÀß ÑÂÀÐÊÀ È ÐÅÇÊÀ ÎÏÀÑÍÛ ÊÀÊ ÄËß ÈÑÏÎËÍÈÒÅËß ÐÀÁÎÒ, ÒÀÊ È ÄËß
ÏÎÑÒ ÎÐÎÍÍÈÕ ËÈÖ. ÒÐÅÁÓÉÒÅ ÑÎÁËÞÄÅÍÈÅ
ÂÑÅÕ ÏÐÀÂÈË ÁÅÇÎÏÀÑÍÎÑÒÈ,
ÄÅÉÑÒ
ÂÓÞÙÈÕ ÍÀ ÎÁÚÅÊÒÅ, ÊÎÒÎÐÛÅ ÄÎËÆÍÛ Ó×ÈÒÛÂÀÒÜ ÑÂÅÄÅÍÈß ÎÁ ÎÏÀÑÍÎÑÒßÕ,
ÏÐÅÄÑÒÀ
ÂËÅÍÍÛÅ ÈÇÃÎÒÎÂÈÒÅËÅÌ ÑÂÀÐÎ×ÍÎÃÎ ÎÁÎÐÓÄ ÎÂÀÍÈß.
ÎÏÀÑÍÎÑÒÜ ÑÌÅÐÒÅËÜÍÎÃÎ ÏÎÐÀÆÅÍÈß ÝËÅÊÒÐÈ×ÅÑÊÈÌ ÒÎÊÎÌ.
S Ñâàðî÷íûé àãðåãàò óñòàíàâëèâàåòñÿ è çàçåìëÿåòñÿ â ñîîòâåòñòâèè ñ äåéñòâóþùèìè íîðìàìè è
ïðàâèëàìè.
S Íå äîïóñêàéòå ê îíò àêòà íàõîäÿùèõñ ÿ ïîä íàïðÿæåíèåì äåòàëåé è ýëåêòðîäîâ ñ íåçàùèùåííûìè
÷àñòÿìèòåëà,ìîêðûìèðóêàâèöàìèèìîêðîéîäåæäîé.
S Îáåñïå÷üòå ýëåêòðè÷åñêóþ èçîëÿöèþ îò çåìëè è ñâàðèâàåìûõ äåòàëåé.
S Îáåñïå÷üòå ñîáëþäåíèå áåçîïàñíûõ ðàáî÷èõ ðàññò îÿíèé.
ÄÛÌÛ È ÃÀÇÛ ìîãóò áûòü îïàñíû äëÿ ÷åëîâåêà
S Èñêëþ÷èòå âîçìî æíîñòü âîçäåéñòâèÿ äûìîâ.
S Äëÿ èñêëþ÷åíèÿ âäûõàíèÿ äûìîâ âî âðåìÿ ñâàðêè îðãàíèçóåòñÿ îáùàÿ âåíòèëÿöèÿ ïîìåùåíèÿ, à
òàêæåâûòÿæíàÿâåíòèëÿöèÿèççîíûñâàðêè.
ÈÇËÓ×ÅÍÈÅ ÄÓÃÈ âûçûâàåò ïîðàæ åíèå ãëàç è îæîãè êîæè.
S Çàùèòèòå ãëàçà è êîæó. Äëÿ ýòîãî èñïîëüçóéòå çàùèòíûå ùèòêè, öâåòíûå ëèíçû è çàùèòíóþ
ñïåöîäåæäó.
S Äëÿ çàùèòû ïîñò îðîííèõ ëèö ïðèìåíÿþòñÿ çàùèòíûå ýêðàíû èëè çàíàâåñè.
ÏÎÆÀÐÎÎÏÀÑÍÎÑÒÜ
S Èñêðû (áðûçãè ìåòàëëà) ìîãóò âûçâàòü ïîæàð. Óáåäèòåñü â îòñóòñòâèè ãîðþ÷èõ ìàòåðèàëîâ
ïîáëèçîñòè îò ìåñòà ñâàðêè.
ØÓÌ - ×ðåçìåðíûé øóì ìîæåò ïðèâåñòè ê ïîâðåæäåíèþ îðãàíîâ ñëóõà
S Ïðèìèòå ìåðû äëÿ çàùèòû ñëóõà. Èñïîëüçóéòå çàòû÷êè äëÿ óøåé èëè äðóãèå ñðåäñòâà çàùèòû
ñëóõà.
S Ïðåäóïðåäèòå ïîñòîðîííèõ ëèö îá îïàñíîñ òè.
ÍÅÈÑÏÐÀÂÍÎÑÒÈ -- Ïðè íåèñïðàâíîñòè îáðàòèòåñü ê ñïåöèàëèñòàì ïî ñâàðî÷íîìó
îáîðóäîâàíèþ
Êîìïàíèÿ ESAB ãîòîâà ïðåäîñòàâèòü âàì âñå çàùèòíîå ñíàðÿæåíèå è
ïðèíàäëåæíîñòè, íå îáõîäèìûå äëÿ âûïîëíåíèÿ ñâàðî÷íûõ ð àáîò.
ÂÍÈÌÀÍÈÅ!
Ïåðåä íà÷àëîì ìîíòàæà è ýêñïëóàòàöèè âíèìàòåëüíî
èçó÷èòå ñîîòâåòñòâóþùèå èíñòðóêöèè.
Çàïðåùàåòñÿ èñïîëüçîâàòü èñòî÷íèê ïèòàíèÿ äëÿ îòòàèâàíèÿ ò ðóá.
ÂÍÈÌÀÍÈÅ!
Äàííîå èçäåëèå ïðåäíàçíà÷åíî òîëüêî äëÿ äóãîâîé ñâàðêè.
bh26d1r -- 4 --
2 ÂÂÅÄÅÍÈÅ
Arc 150i ïðåäñòàâëÿåò ñîáîé èñòî÷íèê ñâàðî÷íîãî òîêà äëÿ èñïîëüçîâàíèÿ ñ
ïîêðûòûìè ýëåêòðîäàìè (ñâàðêà ÌÌÀ) è äëÿ ñâàðêè âîëüôðàìîâûì
ýëåêòðîäîì â ñðåäå èíåðòíîãî ãàçà (ñâàðêà TIG).
2.1 Îáîðóäîâàíèå
Arc 150i ïîñòàâëÿåòñÿ ñ 3 ì ñåò åâûì êàáåëåì è ðóêîâîäñòâîì ïî ýêñïëóàò àöèè.
Àêñåññóàð² îò ä ëÿ èçäåëÿ ìîæíî íàéòè íà ñòðíèöå 30.
3 ÒÅÕÍÈ×ÅÑÊÈÅ ÕÀÐÀÊÒÅÐÈÑÒÈÊÈ
Arc 150i
Íàïðÿæåíèå ñåòè ïèòàíèÿ 150 Â, ±10%, 3∼ 50/60 Ãö
Ïåðâè÷íûé òîê
ìàêñ.
38 À
Ïîòðåáëÿåìàÿ ìîùíîñòü õîëîñòîãî õîäà â ðåæèìå
ýíåðãîñáåðåæåíèÿ, 6,5 ìèí ï îñëå ñâ àðêè
50 Âò
Äèàïàçîí óñòàâîê 16-400 A
Ìàêñèìàëüíàÿ äîïóñòèìàÿ íàãðóçêà ïðè
êîýôôèöèåíò íàãðóçêè ðàáî÷åãî öèêëà 35%
êîýôôèöèåíò íàãðóçêè ðàáî÷åãî öèêëà 60 %
êîýôôèöèåíò íàãðóçêè ðàáî÷åãî öèêëà 100 %
150A/36Â
A/33Â
A/30Â
Êîýôôèöèåíò ìîùíîñòè ïðè ìàêñèìàëüíîì òîêå 0,65
Êïä ïðè ìàêñèìàëüíîì òîêå 85%
Íàïðÿæåíèå õîëîñòîãî õîäà 78 -90 Â
Ðàáî÷àÿ òåìïåðàòóðà îò -10 äî +40˚C
Ãàáàðèòû,ÄxØx 625 x 294 x 492 ìì
Íåïðåðûâíî äåéñòâóþùåå ñðåäíåâçâåøåííîå çâóêîâîå
äàâëåíèå
<70äÁ
Ìàññà 7,7 êã
Êëàññ èçîëÿöèè H
Ê ëàññ çàùèòû êîðïóñà IP 23
Êëàññ ïðèìåíåíèÿ
Ðàáî÷èé öèêë
Ðàáî÷èé öèêë ïðåäñòàâëÿåò ñîáîé äîëþ (â %%) äåñÿòèìèíóòíîãî èíòåðâàëà, â òå÷åíèå
êîòîðîé ìîæíî ïðîèçâîäèòü ñâàðêó ïðè îïðåäåëåííîé íàãðóçêå áåç ïåðåãðóçêè.
Êëàññ êîæóõà
Íîðìû IP óêàçûâàþò êëàññ êîæóõà, ò.å., ñòåïåíü çàùèòû îò ïðîíèêíîâåíèÿ òâåðäûõ
îáúåêòîâ è âîäû. Îáîðóäîâàíèå ñ ìàðêèðîâêîé IP 23 ïðåäíàçíà÷åíî äëÿ íàðóæíîé è
âíóòðåííåé óñòàíîâêè.
Ê ëàññ çîíû óñòàíîâêè
Ýòîò ñèìâîë îçíà÷àåò, ÷òî èñòî÷íèê ïèòàíèÿ ïðåäíàçíà÷åí äëÿ èñïîëüçîâàíèÿ â çîíàõ
ñ ïîâûøåííîé îïàñíîñòüþ ïîðàæåíèÿ ýëåêòðî òîê îì.
bh26d1r -- 5 --
4ÓÑÒÀÍÎÂÊÀ
Ââîä â ýêñïëóàòàöèþ äîëæåí ïðîèçâîäèòüñÿ êâàëèôèöèðîâàííûì
ñïåöèàëèñòîì.
ÂÍÈÌÀÍÈÅ!
Íàñòîÿùåå èçäåëèå ïðåäíàçíà÷åíî äëÿ ïðîìûøëåííîãî èñïîëüçîâàíèÿ. Ïðè
èñïîëüçîâàíèè â áûòîâûõ óñëîâèÿõ îíî ìîæåò ñîçäàâàòü ðàäèî÷àñòîòíûå ïîìåõè.
Ïîëüçîâàòåëü îòâå÷àåò çà ïðèíÿòèå ñîîòâåòñòâóþùèõ ìåð ïðåäîñòîðîæíîñòè.
Âíèìàíèå!
Ïðèñîåäèíèòü èñòî÷íèê ïèòàíèÿ ê ýëåêòðè÷åñêîé ñåòè ñ ïîëíûì ñîïðîòèâëåíèåì 0.210 Îì
èëè íèæå. Åñëè ïîëíîå ñîïðîòèâëåíèå ñåòè âûøå, âîçíèêàåò ðèñê ìèãàíèÿ îñâåòèòåëüíûõ
ïðèáîðîâ.
4.1 Ðàçìåùåíèå
Ðàçìåñòèòå èñòî÷íèê ïèòàíèÿ òàêèì îáðàçîì, ÷òîáû åãî âîçäóõ îçàáîðíûå è
âûïóñêíûå îòâåðñòèÿ íå áûëè çàãðàæäåíû.
4.2 Ïàñïîðòíàÿ òàáëè÷êà
Ïàñïîðòíàÿ òàáëè÷êà ðàñïîëîæåíà íà íèæíåé ïàíåëè èñòî÷íèêà ïèòàíèÿ.
4.3 Ñåòü ýëåêòðîïèòàíèÿ
Óáåäèòåñü â òîì, ÷òî èñòî÷íèê ñâàðî÷íîãî òîêà ïîäêëþ÷åí ê ñåòè
ýëåêòðîïèòàíèÿ ñ òðåáóåìûì íàïðÿæåíèåì è çàùèùåí ïðåäîõðàíèòåëÿìè
òðåáóåìîãî íîìèíà ëà. Ïëîùà äü ïîïåðå÷íîãî ñå÷åíèÿ êàáåëÿ äîëæíà
ñîîòâåòñòâîâàòü ñò àíäàðòàì êîíêðåòíîé ñòðàíû. Íåîáõîäèìî îáåñïå÷èòü
çàùèòíîå çàçåìëåíèå â ñîîòâåòñòâèè ñ äåéñòâóþùèìè íîðìàìè.
4.3.1 Ðåêîìåíäóåìûå íîìèíà ëû ïðå äîõðàíèòåëåé è ìèíèìà ëüíàÿ
ïëîùàäü ïîïåðå÷íîãî ñå÷å íèÿ êàáåëåé
Arc 150i
Íàïðÿæåíèå ñåòè ïèòàíèÿ 230 Â ¦10 %, 1 ôàçà
×àñòîòà ñåòè ïèòàíèÿ 50-60 Ãö
Ïëàâêèé ïðåäîõðàíèòåëü (çàìåäëåííîãî
äåéñòâèÿ)
16 À *)
Ñåòåâîé êàáåëü, ïëîùàäü ïîïåðå÷íîãî
ñå÷åíèÿ
3x2,5ìì
2
Ñâàðî÷íûé êàáåëü, ïëîùàäü ïîïåðå÷íîãî
ñå÷åíèÿ
25 ìì
2
*) ÏÐÈÌÅ×ÀÍÈÅ! Ñåòåâîé øòåïñåëü ñåðòèôèöèðîâàí íà ìàêñèìàëüíûé òîê 16A.
Âåðñèÿ äëÿ Ñåâåðíîé Àìåðèêè: Øòåïñåëüíàÿ âèëêà ñèëîâîãî êàáåëÿ èñïûòàíà íà
ìàêñèìàëüíûé òîê 18 À.
Âíèìàíèå!
Âåëè÷èíà ïëîùàäè ïîïåðå÷íîãî ñå÷åíèÿ êàáåëÿ è íîìèíàë ïëàâêîãî ïðåäîõðàíèòåëÿ,
óêàçàííûå âûøå, ñîîòâåòñòâóþò íîðìàòèâíûì äîêóìåíòàì Øâåöèè. Ýêñïëóàòàöèÿ èñòî÷íèêà
ñâàðî÷íîãî òîêà äîëæíà îñóùåñòâëÿòüñÿ â ñîîòâåòñòâèè ñ äåéñòâóþùèìè íàöèîíàëüíûìè
íîðìàòèâíûìè äîêóìåíòàìè.
bh26d1r -- 6 --
5 ÏÎÐßÄÎÊ ÐÀÁÎÒÛ
5.1 Ñîåäèíåíèÿ è óñòðîéñòâà óïðàâëåíèÿ
1 Ãëàâíûé â ûêëþ÷àòåëü ïèòàíèÿ, 0 / 1 4 Ðàçúåì äëÿ ïîäêëþ÷åíèÿ áëîêà
äèñòàíöèîííîãî óïðàâëåíèÿ
2 Ñåòåâîé êàáåëü 5 Ñîåäèíèòåëü êàáåëÿ ñâàðî÷íîãî òîêà
(+)
3 Ñîåäèíèòåëü îáðàòíîãî ê àáåëÿ (-) 6 Ïàíåëü óïðàâëåíèÿ (ñì. 6.2)
3 è 5 èñïîëüçóþòñÿ äëÿ ïîäà÷è ñâàðî÷íîãî òîêà è ïîäêëþ÷åíèÿ îáðàòíîãî êàáåëÿ âî âðåìÿ
ñâàðêè ìåòîäîì ÌÌÀ
5.2 Ïðèñîåäèíåíèå ñâàðî÷íîãî è îáðàòíîãî êàáåëåé
Ñâàðî÷íûé èñòî÷íèê ïèòàíèÿ ñíàáæåí äâóìÿ êëåììàìè, îäíà èç êîòîðûõ
èìååò ïîëîæèòåëüíóþ ïîëÿðíîñòü, äðóãàÿ - îòðèöàòåëüíóþ,
ïðåäíàçíà÷åííûìè ä ëÿ ïîäêëþ÷åíèÿ ñâàðî÷íîãî è îáðàòíîãî êàáåëåé.
Ïðèñîåäèíèòå ñâàðî÷íûé êàáåëü ê òîé êëåììå, ïîëÿðíîñòü êîòîðîé
ñîîòâåòñòâóåò ïîëÿðíîñòè, óêàçàííîé íà óïàêîâêå ñ èñïîëüçóåìûìè
ýëåêòðîäàìè.
Ïðèñîåäèíèòå îáðàòíûé êàáåëü ê äðóãîé êëåììå. Çàêðåïèòå çàæèì
çàçåìëåíèÿ îáðàòíîãî êàáåëÿ íà äåòàëè è óáåäèòåñü, ÷òî ìåæäó äåòàëüþ è
êëåììîé îáðàòíîãî êàáåëÿ íà ñâàðî÷íîì èñòî÷íèêå ïèòàíèÿ åñòü õîðîøèé
êîíòàêò.
5.3 Ïàíåëü óïðàâëåíèÿ A34
Ðåã óëèðîâàíèå ïàðàìåòðîâ ñâàðêè îñóùåñòâëÿåòñÿ ñ ïàíåëè óïðàâëåíèÿ.
bh26d1r -- 7 --
5.3.1 Òåõíè÷åñ êîå îïèñàíèå
Ïîçè
öèÿ
Îáîçíà÷åíèå/Ôóíêöèÿ Çàäàííûå âåëè÷èíû
1 Ðó÷êà äëÿ óñòàíîâêè ïàðàìåòðîâ -
2 Ìîùíîñòü äóãè 0-99
3 Ãî ð ÿ ÷ è é ï ó ñ ê 0-99
4 Ñâàðêà ìåòîäîì TIG -
5 Ñâàðêà ïîêðûòûìè ýëåêòðîäàìè, ìåòîä ÌÌÀ -
6 Êíîïêà èíäèêàöèè ñâàðî÷íîãî òîêà (A)
è/èëè íàïðÿæåíèÿ äóãè (Â)
7 Ðàçúåì äëÿ ïîäêëþ÷åíèÿ áëîêà äèñòàíöèîííîãî
óïðàâëåíèÿ
-
8 Ëàìïà èíäèêàöèè íàïðÿæåíèÿ ñåòè ïèòàíèÿ (çåëåíàÿ) -
9 Ëàìïà èíäèêàöèè ïåðåãðåâà (æåëòàÿ) -
5.3.2 Ôóíêöèîíàëüíûå îáîçíà÷åíèÿ íà ïàíåëè
MMA À/Â Fjärrdon
TIG Ãîðÿ÷èé ïóñ ê Ìîùíîñòü äóãè
5.3.3 Ñêðûòûå ôóíêöèè
Ïåðå÷åíü óñòàâîê äëÿ ïàðàìåòðîâ ñâàðêè, òàêèõ êàê êàïåëüíàÿ ñâàðêà è
ArcPlust, ìîæíî ïîëó÷èòü, íàæàâ Arc Force èHotStart
îäíîâðåìåííî, â òå÷åíèå íå ìåíåå ÷åì 1 ñåêóíäû. Âûáîð ôóíêöèè
îñóùåñòâëÿåòñÿ ñ ïîìîùüþ ðó÷êè íàñòðîéêè, à ñïîñîá ñâàðêè âûáèðàåòñÿ
íàæàòèåì êíîïêè ArcForce èëè HotStart.
Äëÿ ìåòîäà ÌÌÀ ìîæíî íàéòè ñëåäóþùèå íàñòðîéêè ïàðàìåòðîâ ñâàðêè ïîä
áóêâåííûìè îáîçíà÷åíèÿìè:
D = óñòàíîâêà ïåðåïàäîâ ïðè ñâàðê å
F = óñòàíîâêà ðåãóëÿòîðà äóãèt
Âåðíóòüñÿ ìîæíî, íàæàâ ArcForce è HotStart îäíîâðåìåííî,
â òå÷åíèå íå ìåíåå ÷åì 1 ñåêóíäû.
cmha2p11
cmha2p10
bh26d1r -- 8 --
5.4 Ïàðàìåòðû
Ïàðàìåòðû Äèàïàçîí óñòàâîê Ïî øàãàì: Çíà÷åíèå ïî
óìîë÷àíèþ
Ìåòîä ñâàðêè TIG èëè MMA -- TIG
Ìîùíîñòü äóãè 0--10ñ 0,1 ñ 2,0 ñ
Êàïåëüíàÿ ñâàðêà
ArcPlust
Ãî ð ÿ ÷ è é ï ó ñ ê
5.5 Çàùèòà îò ïåðåãðåâà
Èñòî÷íèê ïèòàíèÿ ñíàáæåí ðåëå çàùèòû îò òåïëîâîé ïåðåãðóçêè, êîòîðîå
ñðàáàòûâàåò ïðè íåäîïóñòèìîì âîçðàñòàíèè òåìïåðàòóðû. Ïðè ýòîì
ïðåêðàùàåòñÿ ïîäà÷à ñâàðî÷íîãî òîêà è çàãîðàåòñÿ æåëòàÿ èíäèêàòîðíàÿ
ëàìïà íà ïåðåäíåé ïàíåëè èñòî÷íèêà ïèòàíèÿ. Êîãäà òåìïåðàò óðà ñíèçèòñÿ,
ðåëå çàùèòû îò ïåðåãðóçêè àâòîìàòè÷åñêè âîçâðàùàåòñÿ â èñõîäíîå
ïîëîæåíèå.
5.6 Ñâàðêà ìåòîäîì ÌMA
Óñòðîéñòâî Arc 150i äàåò ïîñòîÿííûé òîê, ÷òî ïîçâîëÿåò ïðîèçâîäèòü ñâàðêó
áîëüøèíñòâà ìåòàëëîâ ñ ëåãèðîâàííîé è íåëåãèðîâàííîé ñòà ëüþ,
íåðæàâåþùåé ñòà ëüþ è ÷óãóíîì. Óñòðîéñòâî Arc 150i ïîçâîëÿåò ï ðîèçâîäèòü
ñâàðêó áîëüøèíñòâîì òèïîâ ïîêðûòûõ ýëåêòðîäîâ, îò ∅ 1,6 äî ∅ 3,25.
Ìåòîä MMA íàçûâàåòñÿ òàêæå ñâàðêîé ïîêðûòûìè ýëåêòðîäàìè. Çàææåííàÿ äóãà
ðàñïëàâëÿåò ýëåêòðîä, è åãî ïîêðûòèå îáðàçóåò çàùèòíûé øëàê.
Åñëè ïðè çàæèãàíèè äóãè êîí÷èê ýëåêòðîäà ïðèæàòü ê ìåòàëëó, îí ñðàçó æå
ðàñïëàâèòñÿ è ïðèëèïíåò ê ìåòàëëó, äåëàÿ íåâîçìîæíîé íåïðåðûâíóþ ñâàðêó.
Ñëåäîâàòåëüíî, çàæèãàíèå äóãè äîëæíî ïðîèçâîäèòüñÿ òàêèì æå îáðàçîì, êàê
çàæèãàíèå ñïè÷êè.
Ïðèêîñíèòåñü ýëåêòðîäîì ê ìåòàëëó, çàòåì ïîäíèìèòå åãî
òàê, ÷òîáû ï îëó÷èëàñü äóãà îïðåäåëåííîé äëèíû (ïðèìåðíî
2 ìì). Åñëè äëè íà äóãè ÷åðåñ÷óð âåëèêà, ñëûøåí
õàðàêòåðíûé òðåñê è èìååò ìåñòî ðàçáðûçãèâàíèå ìåòàëëà,
ïîñëå ÷åãî äóãà îêîí÷àòåëüíî ïîãàñíåò.
Ïðè ðàáîòå íà ñâàðî÷íîì ñò åíäå ïåðåä çàæèãàíèåì äóãè
óáåäèò åñü, ÷òî îòõîäû ìå òàëëà, êóñêè ýëåêòðîäîâ, èëè
äðóãèå ïðåäìåòû íå èçîëèðóþò ñâàðèâàåìóþ äåòàëü.
Ïîñëå çàæèãàíèÿ äóãè ïåðåìåùàéòå ýëåêòðîä ñëåâà
íàïðàâî. Ýëåêòðîä äîëæåí ðàñïîëàãàòüñÿ ïîä óãëîì 60˚ ê
ìåòàëëó îòíîñèòåëüíî íàïðàâëåíèÿ ñâàðêè.
Ïðè íåîáõîäèìîñòè âûïîëíåíèÿ øèðîêîãî øâà èëè î÷åíü
òîëñòîãî øâà (ïîñëåäîâàòåëüíû íàëîæåíèåì íåñêîëüêèõ
øâîâ) ïðîèçâîäÿòñÿ äâèæåíèÿ â ïîïåðå÷íîì íàïðàâëåíèè.
bh26d1r -- 9 --
Ðåãóëÿòîðóñòàâîê-ArcPlust
Arc 150i ïîñòàâëÿåòñÿ ñ ArcPlust, óñòðîéñòâîì óïðàâëåíèÿ íîâîãî òèïà,
êîòîðîå, âî âðåìÿ ñâàðêè ìåòîäîì MMA, ïîçâîëÿåò ïîëó÷èòü áîëåå
èíòåíñèâíóþ, áîëåå êîíöåíòðèðîâàííóþ, è áîëåå ñïîêîéíóþ äóãó. Îíà
áûñòðåå âîññòàíàâëèâàåòñÿ ïîñëå êàïåëüíîãî ê îðîòêîãî çàìûêàíèÿ, ÷òî
óìåíüøàåò ðèñê ïðèëèïàíèÿ ýëåêòðîäà.
Êàïåëüíàÿ ñâàðêà (MMA)
Ìåòîä êàïåëüíîé ñâàðêè ìîæåò áûòü èñïîëüçîâàí ïðè ñâàðêå íåðæàâåþùèìè
ýëåêòðîäàìè.
Ýòà ìåòîäèêà ïðåäïîëàãàåò ïîïåðåìåííîå çàæèãàíèå è ãàøåíèå äóãè, äëÿ
òîãî, ÷òîáû ëó÷øå êîíòðîëèðîâàòü âûäåëåíèå òåïëà. Äëÿ òîãî, ÷òîáû ïîãàñèòü
äóãó, ýëåêòðîä íóæíî íåìíîãî ïðèïîäíÿòü.
Ãîðÿ÷èé ïóñ ê
Ãîðÿ÷èé ïóñê óâåëè÷èâàåò ñâàðî÷íûé òîê íà ðåãóëèðóåìîå âðåìÿ â íà÷àëå
ïðîöåññà ñâàðêè, ñíèæàÿ òåì ñàìûì ðèñê ïëîõîãî ñïëàâëåíèÿ â íà÷à ëå øâà.
Ìîùíîñòü äóãè
Ìîùíîñòü äóãè èìååò âàæíîå çíà÷åíèå äëÿ çàäàíèÿ òîãî, êàê èçìåíÿåòñÿ òîê â
îòâåò íà èçìåíåíèå äëèíû äóãè. ×åì ìåíüøå ìîùíîñòü äóãè, òåì òèøå çâóê è
ìåíüøå ðàçáðûçãèâàíèå.
Òîê
×åì áîëüøå òîê, òåì áîëüøå ðàçìåð çîíû ñâàðêè è ëó÷øå ïðîíèêíîâåíèå â
ñâàðèâàåìóþ äåòàëü.
Çà äàííîå çíà÷åíèå òîêà ìîæíî èçìåíèòü, íåçàâèñèìî îò òîãî, êàêîå ìåíþ
îòîáðàæàåòñÿ. Ýòî çíà÷åíèå îòîáðàæàåòñÿ òîëüêî â ãëàâíîì ìåíþ.
5.7 Ñâàðêà ìåòîäîì TIG
Ïðè ñâàðêå TIG ïðîèñõîäèò ðàñïëàâëåíèå ìåòàëëà ñâàðèâàåìîé äåòàëè ñ
ïîìîùüþ ýëåêòðè÷åñêîé äóãè, âîçáóæäàåìîé íà âîëüôðàìîâîì ýëåêòðîäå,
êîòîðûé ñàì íå ïëàâèòñÿ. Çîíà ñâàðêè è ñàì ýëåêòðîä çàùèùåíû
àòìîñôåðîé èç çàùèòíîãî ãàçà.
Ñâàðêà TIG (àðãîíîäóãîâàÿ ñâàðêà) ïðèìåíÿåòñÿ ïðè âûñîêèõ òðåáîâàíèÿõ ê
êà÷åñòâó ñâàðíîãî øâà è ïðè ñâàðêå òîíêèõ ëèñòîâ.
Arc 150i èìååò îòëè÷íûå ñâàðî÷íûå õàðàêòåðèñòèêè, íåîáõîäèìûå äëÿ ñâàðêè
ìåòîäîì TIG.
Íàèëó÷øèì ìåòîäîì ïîäæèãà äóãè ÿâëÿåòñÿ ïîäæèã “êàñàíèåì”. Â ýòîì
ñëó÷àå äëÿ âîçáóæäåíèÿ äóãè âîëüôðàìîâûì íåïëàâÿùèìñÿ ýëåêòðîäîì
ñëåãêà êàñàþòñÿ ïîâåðõíîñòè ñâàðèâàåìîãî èçäåëèÿ. Âûïðÿìèòåëü
îáîðóäóåòñÿ ñâàðî÷íîé ãîðåëêîé, ïðåäíàçíà÷åííîé äëÿ ñâàðêè TIG ñ ãàçîâûì
êëàïàíîì, áàëëîíîì ñ àðãîíîì, ãàçîâûì ðåäóêòîðîì è, ïðè íåîáõîäèìîñòè,
ïðèñàäî÷íûì ïðó òêîì.
bh26d1r -- 1 0 --
LiftArct
Ôóíêöèÿ Lift Arct (Ïîäúåì äóãè) çàæèãàåò äóãó, êîãäà ýëåêòðîä, íàõîäÿùèéñÿ
â êîíòàêòå ñ äåòàëüþ, îòâîäèòñÿ îò íåå ââåðõ.
Âîçáóæäåíèå äóãè ñ ïîìîùüþ ôóíêöèè Lift Arc. Øàã 1: ýëåêòðîä êàñàåòñÿ äåòàëè. Øàã 2:
íàæàò ïóñêîâîé âûêëþ÷àò åëü, è íà÷èíàåòñÿ ïîäà÷à íåáîëüøîãî òîêà. Øàã 3: ñâàðùèê
îòâîäèò ýëåêòðîä ââåðõ îò äåòà ë è: âîçáóæäàåòñÿ äóãà, è òîê àâòîìàòè ÷åñêè ïîâûøàåòñÿ äî
çàäàííîé âåëè÷èíû.
5.8 Áëîê äèñòàíöèîííîãî óïðàâëåíèÿ
Áëîê äèñòàíöèîííîã î óïðàâëåíèÿ äîëæåí áûòü ïîäêëþ÷åí â ðàçúåìó áëîêà
äèñòàíöèîííîãî óïðàâëåíèÿ, ðàñïîëîæåííîìó íà èñòî÷íèêå òîêà.
Åñëè èñïîëüçîâàíèå áëîêà äèñòàíöèîííîãî óïðàâëåíèÿ íå ïðåäïîëàãàåòñÿ,
ýòà ôóíêöèÿ óäàëÿåòñÿ ñ ïàíåëè.
6 ÒÅÕÍÈ×ÅÑÊÎÅ ÎÁÑËÓÆÈÂÀÍÈÅ
Ðåãóëÿðíîå òåõíè÷åñêîå îáñëóæèâàíèå èìååò âàæíîå çíà÷åíèå äëÿ
îáåñïå÷åíèÿ áåçîïàñíîñòè è íàäåæíîñòè.
Ïðèìå÷àíèå:
à àðàíòìèéíûå îáÿçàòåëüñòâà ïîñòàâùèêà òåðÿþò ñèëó, åñëè ïîêóïàòåëú
ñàìîñòîÿòåëúíî ïûòàåòñÿ ïð îèçâåñòè êàêèå-ëèáî ðàáîòû ïî óñòðàíåíèþ
íåèñïðàâíîñòåé èçäåëèÿ â òå÷åíèå ãàðàíòèéíîãî ñðîêà.
6.1 Ïðîâåðêà è ÷èñòêà
Ïîäêëþ÷åíèå, îáñëóæèâàíèå è ðåìîíò ñâàðî÷íîãî îáîðóäîâàíèå, ñâÿçàííûå
ñî ñíÿòèåì çàùèòíûõ ùèòêîâ, âûïîëíÿþòñÿ ëèöàìè, ïðîøåäøèìè
ñîîòâåòñòâóþùóþ ýëåêòðîòåõíè÷åñêóþ ïîäãîòîâêó è àòòåñòîâàííûìè íà ïðàâî
âûïîëíåíèÿ òà êèõ ðàáîò.
bh26d1r -- 1 1 --
6.2 Î÷èñòêà ïðîòèâîïûëåâîãî ôèëüòðà
S Ñíèìèòå çàùèòíóþ ðåøåòêó âåíòèëÿòîðà: ïîñìîòðèòå ñõåìó.
S Èçâëåêèòå ïðîòèâîïûëåâîé ôèëüòð
S Ïðîäóéòå ôèëüòð íà÷èñòî ñæàòûì âîçäóõîì (ïîíèæåííîå äàâëåíèå).
S Óáåäèòåñü,÷òîôèëüòðññàìîéìåëêîéñåòêîéóñòàíîâëåíáëèæåê
çàùèòíîé ðåøåòêå.
S Óñòàíîâèòå íà ìåñòî çàùèòíóþ ðåøåòêó âåíòèëÿòîðà ñ ïðîòèâîïûëåâûì
ôèëüòðîì.
7 ÂÛßÂËÅÍÈÅ ÍÅÈÑÏÐÀÂÍÎÑÒÅÉ
Ïðåæäå ÷åì âûçûâàòü àòòåñòîâàííîãî ñïåöèàëèñòà ïî îáñëóæèâàíèþ,
ïîïðîáóéòå ñàìîñòîÿòåëüíî âûïîëíèòü ðåêîìåíäóåìûå íèæå ïðîâåðêè.
Òèï íåèñïðàâíîñòè Äåéñòâèÿ:
Îòñóòñòâèå äóãè S Ïðîâåðüòå, âêëþ÷åí ëè âûêëþ÷àòåëü ïèòàíèÿ.
S Ïðîâåðüòå ïðàâèëüíîñòü ïîäñîåäèíåíèÿ êàáåëåé
ïîäà÷è ñâàðî÷íîãî òîêà è îáðàòíûõ êàáåëåé.
S Ïðîâåðüòå, ïðàâèëüíî ëè çàäàíà âåëè÷èíà òîêà.
S Ïðîâåðüòå, íå îòêëþ÷åí ëè ìèíèàòþðíûé âûêëþ÷àòåëü.
×àñòî ñðàá àòûâàþò ðåëå
çàùèòû îò òåïëîâîé
ïåðåãðóçêè.
S Ïðîâåðüòå, íå ñðàáîòàëè ëè ðåëå çàùèòû îò òåïëîâîé
ïåðåãðóçêè (ñðàáàòûâàíèå ðåëå îïðåäåëÿåòñÿ ïî
çàãîðàíèþ æåëòîé ëàìïû íà ëèöåâîé ïàíåëè).
S Ïðîâåðüòå ñåòåâûå ïðåäîõðàíèòåëè.
×àñòî ñðàáàòûâàþò
óñòðîéñòâà çàùèòû îò
òåïëîâîé ïåðåãðóçêè.
S Ïðîâåðüòå, íå çàñîðèëñÿ ëè ïðîòèâîïûëåâîé ôèëüòð.
S Óá åäèòåñü â òîì, ÷òî íå ïðåâûøåíû íîìèíàëüíûå
çíà÷åíèÿ ïàðàìåòðîâ èñòî÷íèêà ïèòàíèÿ (ò. å. ÷òî
óñòðîéñòâî ðàáîòàåò áåç ïåðåãðóçêè).
Íèçêàÿ ýôôåêòèâíîñòü
ñâàðêè.
S Ïðîâåðüòå ïðàâèëüíîñòü ïîäñîåäèíåíèÿ êàáåëåé
ïîäà÷è ñâàðî÷íîãî òîêà è îáðàòíûõ êàáåëåé.
S Ïðîâåðüòå, ïðàâèëüíî ëè çàäàíà âåëè÷èíà òîêà.
S Óá åäèòåñü â òîì, ÷òî èñïîëüçóþòñÿ ýëåêòðîäû
òðåáóåìîãî òèïà.
S Ïðîâåðüòå ñåòåâûå ïðåäîõðàíèòåëè.
bh26d1r -- 1 2 --
7.1 Êîä îøèáêè
Óñòðîéñòâî Arc 150i ïîñòàâëÿåòñÿ, ñíàáæåííûì ôóíêöèåé âûÿâëåíèÿ
íåèñïðàâíîñòåé.  ñëó÷àå âîçíèêíîâåíèÿ íåèñïðàâíîñòè, íà äèñïëåå
îòîáðàæàåòñÿ åå êîä.
Åñëè êàêèå-ëèáî èç ýòèõ êîäîâ íåèñïðàâíîñòåé îòîáðàæàþòñÿ ïîñòîÿííî èëè
ïîÿâëÿþòñÿ ÷àñòî, óñòðîéñòâî ñëåäóå ò îòïðàâèòü íà ðåìîíò â
ñåðòèôèöèðîâàííóþ ðåìîíòíóþ ìàñòåðñêóþ ESAB.
Íåèñï
ðàâíî
ñòü
Îïèñàíèå Âîçâðàò â èñõîäíîå
ïîëîæ åíèå
Äåéñòâèÿ:
E1 Íåèñïðàâíîñòü
âñòðîåííîãî ÎÇÓ
Ïðîèçâåäèòå ïîâòîðíûé
ïóñê óñòðîéñòâà.
Åñëè íåèñïðàâíîñòü
îñòàåòñÿ, îáðàòèòåñü â
ìàñòåðñêóþ ïî
îáñëóæèâàíèþ
E2 Íåèñïðàâíîñòü
âñòðîåííîãî ÎÇÓ
Ïðîèçâåäèòå ïîâòîðíûé
ïóñê óñòðîéñòâà.
Åñëè íåèñïðàâíîñòü
îñòàåòñÿ, îáðàòèòåñü â
ìàñòåðñêóþ ïî
îáñëóæèâàíèþ
E3 Íåèñïðàâíîñòü ÏÏÇÓ Ïðîèçâåäèòå ïîâòîðíûé
ïóñê óñòðîéñòâà.
Åñëè íåèñïðàâíîñòü
îñòàåòñÿ, îáðàòèòåñü â
ìàñòåðñêóþ ïî
îáñëóæèâàíèþ
E4 Íåèñïðàâíîñòü â ÎÇÓ ñ
ðåçåðâíûì áàòàðåéíûì
ïèòàíèåì
Ïðîèçâåäèòå ïîâòîðíûé
ïóñê óñòðîéñòâà.
Åñëè íåèñïðàâíîñòü
îñòàåòñÿ, îáðàòèòåñü â
ìàñòåðñêóþ ïî
îáñëóæèâàíèþ
E5 Îøèáêà äîñòóïà ê
îïåðàòèâíîé ïàìÿòè,
ïåðåìåííàÿ âåëè÷èíà
âûõîäèò çà ïðåäåëû
Ïðîèçâåäèòå ïîâòîðíûé
ïóñê óñòðîéñòâà.
Åñëè íåèñïðàâíîñòü
îñòàåòñÿ, îáðàòèòåñü â
ìàñòåðñêóþ ïî
îáñëóæèâàíèþ
E6 Íèçêîå íàïðÿæåíèå
àêêóìóëÿòîðíîé áàòàðåè
Íàæàòèåì êíîïêè
ïðîèçâåäèòå ïåðåçàãðóçêó
Åñëè íåèñïðàâíîñòü
îñòàåòñÿ, îáðàòèòåñü â
ìàñòåðñêóþ ïî
îáñëóæèâàíèþ
E10 Íåèñïðàâíîñòü + 20 Â
(18,5 - 21,5 Â)
Aâòîìàòè÷åñêàÿ
ïåðåçàãðóçêà ïîñëå
óñòðàíåíèÿ íåèñïðàâíîñòè
E11 Íåèñïðàâíîñòü -15 Â
(-13,0 - -16,0)
Aâòîìàòè÷åñêàÿ
ïåðåçàãðóçêà ïîñëå
óñòðàíåíèÿ íåèñïðàâíîñòè
E13 Âûñîêàÿ òåìïåðàòóðà Aâòîìàòè÷åñêàÿ
ïåðåçàãðóçêà ïîñëå
óñòðàíåíèÿ íåèñïðàâíîñòè
bh26d1r -- 1 3 --
Íåèñï
ðàâíî
ñòü
Äåéñòâèÿ:Âîçâðàò â èñõîäíîå
ïîëîæ åíèå
Îïèñàíèå
E14 Íåèñïðàâíîñòü â ñèñòåìå
ñëåæåíèÿ çà òîêîì
Aâòîìàòè÷åñêàÿ
ïåðåçàãðóçêà ïîñëå
óñòðàíåíèÿ íåèñïðàâíîñòè.
Êðîìå òîãî, ïðîèçâåäèòå
ïåðåçàãðóçêó íàæàòèåì
êíîïêè
E99 Íåóäà÷íîå ñîåäèíåíèå Äëÿ ñîåäèíåíèÿ ïðè
èñïîëüçîâàíèè êàðòû
öèôðîâîãî óïðàâëåíèÿ
èñïîëüçîâàíà
íåîïðåäåëåííàÿ
êîìáèíàöèÿ.
Ïðîèçâåäèòå ïîâòîðíûé
ïóñê óñòðîéñòâà.
Åñëè íåèñïðàâíîñòü
îñòàåòñÿ, îáðàòèòåñü â
ðåìîíòíóþ ìàñòåðñêóþ
8 ÇÀÊÀÇ ÇÀÏÀÑÍÛÕ ×ÀÑÒÅÉ
Ðàáîòû ïî ðåìîíòó è ýëåêòðè÷åñêîìó ìîíòàæó äîëæíû âûïîëíÿòüñÿ
êâàëèôèöèðîâàííûì ñïåöèàëèñòîì ESAB .
Íåîáõîäèìî èñïîëüçîâàòü òîëüêî çàïàñíûå ÷àñòè, âûïóùåííûå ôèðìîé
ESAB.
Çàïàñíûå ÷àñòè ìîæíî çàêàçòú ó áëèæàéøåãî ê Âàì ESAB, (ñì. ïåðå÷åíú íà
ïîñëåäíåé ñòðàíèöå äàííîé áðîøþðû).
ENGLISH
-- 1 4 --
TOCe
1 DIRECTIVE 15........................................................
2SAFETY 15...........................................................
3 INTRODUCTION 17...................................................
3.1 Equipment 17................................................................
4 TECHNICAL DATA 17.................................................
5 INSTALLATION 18....................................................
5.1 Placing 18...................................................................
5.2 Rating plate 18...............................................................
5.3 Mains power supply 18........................................................
6 OPERATION 19.......................................................
6.1 Connections and control devices 19............................................
6.2 Connection of welding and return cable 19.......................................
6.3 Control panel A34 19.........................................................
6.4 Settings 21..................................................................
6.5 Overheating protection 21.....................................................
6.6 MMA welding 21.............................................................
6.7 TIG welding 22...............................................................
6.8 Remote control unit 22........................................................
7 MAINTENANCE 23....................................................
7.1 Cleaning the dust filter 23.....................................................
8 FAULT TRACING 23...................................................
8.1 Fault codes 24...............................................................
9 ORDERING SPARE PARTS 24..........................................
DIAGRAM 26............................................................
ORDERING NUMBER 28.................................................
SPARE PARTS LIST 29...................................................
ACCESSORIES 30.......................................................
-- 1 5 --
bh26d1e
1DIRECTIVE
DECLARATION OF CONFORMITY
ESAB AB, Welding Equipment, SE--695 81 Laxå, Sweden, gives its unreserved guarantee that weld-
ing power source Arc 150i from serial number 620 complies with standard IEC/EN 60974--1, in ac-
cordance with the requirements of directive (73/23/EEC) and addendum (93/68/EEC) and with stan-
dard IEC/EN 60974--10 in accordance with the requirements of directive (89/336/EEC) and adden-
dum (93/68/EEC).
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
Kent Eimbrodt
Global Director Equipment and Automation
ESAB AB
695 81 LAXÅ
SWEDEN Tel: + 46 584 81000 Fax: + 46 584 411924
Laxå 2006--05--22
2SAFETY
Users of ESAB welding equipment have the ultimate responsibility for ensuring that anyone who works on or near the equipment
observes all the relevant safety precautions. Safety precautions must meet the requirements that apply to this type of welding
equipment. The following recommendations should be observed in addition to the standard regulations that apply to the work-
place.
All work must be carried out by trained personnel well--acquainted with the operation of the welding equipment. Incorrect oper-
ation of the equipment may lead to hazardous situations which can result in injury to the operator and damage to the equipment.
1. Anyone who uses the welding equipment must be familiar with:
S its operation
S location of emergency stops
S its function
S relevant safety precautions
S welding
2. The operator must ensure that:
S no unauthorized person is stationed within the working area of the equipment when it is started up.
S no--one is unprotected when the arc is struck
3. The workplace must:
S be suitable for the purpose
S be free from drafts
4. Personal safety equipment
S Always wear recommended personal safety equipment, such as safety glasses, flame--proof clothing, safety gloves.
S Do not wear loose--fitting items, such as scarves, bracelets, rings, etc., which could become trapped or cause burns.
5. General precautions
S Make sure the return cable is connected securely.
S Work on high voltage equipment may only be carried out by a qualified electrician.
S Appropriate fire extinquishing equipment must be clearly marked and close at hand.
GB
-- 1 6 --
bh26d1e
WARNING
READ AND UNDERSTAND THE INSTRUCTION MANUAL BEFORE INSTALLING OR OPERATING.
ARC WELDING AND CUTTING CAN BE INJURIOUS TO YOURSELF AND OTHERS. TAKE PRECAU-
TIONS WHEN WELDING. ASK FOR YOUR EMPLOYER’S SAFETY PRACTICES WHICH SHOULD BE
BASED ON MANUFACTURERS’ HAZARD DATA.
ELECTRIC SHOCK -- Can kill
S Install and earth the welding unit in accordance with applicable standards.
S Do not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing.
S Insulate yourself from earth and the workpiece.
S Ensure your working stance is safe.
FUMES AND GASES -- Can be dangerous to health
S Keep your head out of the fumes.
S Use ventilation, extraction at the arc, or both, to take fumes and gases away from your breathing zone
and the general area.
ARC RAYS -- Can injure eyes and burn skin.
S Protect your eyes and body. Use the correct welding screen and filter lens and wear protective
clothing.
S Protect bystanders with suitable screens or curtains.
FIRE HAZARD
S Sparks (spatter) can cause fire. Make sure therefore that there are no inflammable materials nearby.
NOISE -- Excessive noise can damage hearing
S Protect your ears. Use earmuffs or other hearing protection.
S Warn bystanders of the risk.
MALFUNCTION -- Call for expert assistance in the event of malfunction.
PROTECT YOURSELF AND OTHERS!
ESAB can provide you with all necessary welding p rotectio n and accessories.
WARNING!
Read and understand the instruction manual before installing
or operating.
Do not use the power source for thawing frozen pipes.
WARNING!
This product is solely intended for arc welding.
Do not dispose of electrical equipment together with normal waste!
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic
Equipment and its implementation in accordance with national law, electrical equipment
that has reached the end of its life must be collected separately and returned to an
environmentally compatible recycling facility. As the owner of the equipment, you should
get information on approved collection systems from our local representative.
By applying this European Directive you will improve the environment and human health!
GB
-- 1 7 --
bh26d1e
3 INTRODUCTION
The Arc 150i is a welding current power source intended for use with coated
electrodes (MMA welding) and TIG welding.
3.1 Equipment
The Arc 150i is supplied with 3 m of mains cable and an instruction manual.
ESAB’s accessories for the product can be found on page 30.
4 TECHNICAL DATA
Arc 150i
Mains voltage 230 V, 1 μ 50/60 Hz
Fuse (delayed--action) 16 A
Primary current I
max
36 A
Primary current I
eff
21 A
Voltage/current range (DC) 4 A /20 V -- 150 A /26 V
Maximum permissible load at
25% duty cycle
35% duty cycle
60% duty cycle
100% duty cycle
150 A / 26 V
140 A / 26 V
110A/25V
90 A / 24 V
Power factor at maximum current 0,62
Efficiency at maximum current 77%
Open --circuit voltage 71--78 V
Operating temperature -- 1 0 ˚C-- +40˚ C
Constant A--weighed sound pressure <70db
Dimensions, l x b x h 394 x 267 x 274 mm
Weight 9kg
Enclosure class IP 23C
Application class
Duty cycle
The duty cycle refers to the time as a percentage of a ten--minute period that you can weld at a cer-
tain load without overloading.
Enclosure class
The IP code indicates the enclosure class, i. e. the degree of protection against penetration by solid
objects or water. Equipment marked IP23 is designed for indoor and outdoor use.
Application class
The symbol indicates that the power source is designed for use in areas with increased
electrical hazard.
GB
-- 1 8 --
bh26d1e
5 I NSTALLATION
The installatio n must be executed b y a p rofession al.
WARNING!
This product is intended for industrial use. In a domestic environment this product may cause radio
interference. It is the user’ s responsibility to take adequate precautions.
Note!
Connect the power source to the electricity mains with a network impedance of 0.210 ohm or lower . If the
network impedance is higher , there is a risk of flicker in the illuminators.
5.1 Placing
Place the power source so that its cooling air inlets and outlets are not obstructed.
5.2 Rating plate
The rating plate is located on the underside of the power source.
5.3 Mains power supply
Make sure that the welding power source is connected to the correct supply voltage
and that it is protected by the correct fuse rating. The standards for the country in
question must be complied with as regards the mains cable area. A protective earth
connection must be made in accordance with regulations.
5.3.1 Recommended fuse sizes and minimum cab le areas
Arc 150i
Mains voltage 230 V ¦10 %, 1--phase
Mains frequency 50--60 Hz
Fuse (delayed--action)
100A 20% duty cycle
120A 35% duty cycle
150A 35% duty cycle
10 A
16 A
20 A*)
Mains cable, area 3x2.5mm
2
Welding cable, area 16 mm
2
*) Note! The installed plug is approved for max. 16A.
North American version: The mains cable is approved for maximun 18 A.
Note!
The cable area and fuse rating above comply with Swedish regulations. Use the welding power source
in accordance with the relevant national regulations.
GB
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
ESAB Caddy Arc 150i Manuale utente
- Categoria
- Sistema di saldatura
- Tipo
- Manuale utente
- Questo manuale è adatto anche per
in altre lingue
- English: ESAB Caddy Arc 150i User manual
Documenti correlati
-
ESAB Origo™Arc 150 Manuale utente
-
ESAB Tig 2200i Manuale utente
-
-
ESAB Caddy Arc 151i Manuale utente
-
ESAB Professional 250 Caddy® Manuale utente
-
ESAB TA34 Caddy Manuale utente
-
ESAB TA24 Origo™ Manuale utente
-
ESAB TA24 AC/DC Origo™ Manuale utente
-
-