0459 944 027 060802
Valid from program version 1.01
TA24 AC/DC
Origot
Instruction manual Èíñòðóêöèÿ ïî ýêñïëóàòàöèè
-- 2 --
Rights reserved to alter specifications without notice.
Îñòàâëÿåì çà ñîáîé ïðàâî èçìåíÿòü ñïåöèôèêàöèþ áåç ïðåäóïðåæäåíèÿ.
Ðóññêèé 3...............................................
ENGLISH 17..............................................
Ðóññêèé
TOCr
-- 3 --
1 ÂÂÅÄÅÍÈÅ 4.......................................................
1.1 Ïóëüò óïðàâëåíèÿ 4........................................................
2 ÑÂÀÐÊÀ TIG 5......................................................
2.1 Óñòàâêè 5..................................................................
2.2 Îáúÿñíåíèå ñèìâîëîâ è ôóíêöèé 6.........................................
2.3 Ñêðûòûå ôóíêöèè TIG 11....................................................
3 ÑÂÀÐÊÀ MMA 11.....................................................
3.1 Óñòàâêè 11..................................................................
3.2 Îáúÿñíåíèå ñèìâîëîâ è ôóíêöèé 12.........................................
3.3 Ñêðûòûå ôóíêöèè MMA 12..................................................
4 ÇÀÏÎÌÈÍÀÞÙÅÅ ÓÑÒÐÎÉÑÒÂÎ ÏÀÐÀÌÅÒÐÎÂ ÑÂÀÐÊÈ 13..........
5 ÊÎÄÛ ÍÅÈÑÏÐÀÂÍÎÑÒÅÉ 13........................................
5.1 Ïåðå÷åíü êîäîâ íåèñïðàâíîñòåé 14..........................................
5.2 Îïèñàíèå êîäîâ îøèáîê 14..................................................
6 ÇÀÊÀÇ ÇÀÏÀÑÍÛÕ ×ÀÑÒÅÉ 16.......................................
ÍÎÌÅÐ ÇÀÊÀÇÀ 30.....................................................
bi14d1ra -- 4 --
1 ÂÂÅÄÅÍÈÅ
Äàííîå ðóêîâîäñòâî îïèñûâàåò ïóëüò óïðàâëåíèÿ TA24 AC/DC .
Îáùèå ñâåäåíèÿ ïî ýêñïëóàòàöèè ïðèâåäåíû â èíñòðóêöèè ê èñòî÷íèêó
ïèòàíèÿ.
Ïðè ïîäà÷å ñåòåâîãî ïèòàíèÿ íà óñòðîéñòâî íà÷èíàåòñÿ
ñàìîïðîâåðêà ñâåòîäèîäíûõ èíäèêàòîðîâ è äèñïëåÿ, ïðè
ýòîì íà äèñïëåå îòîáðàæàåòñÿ âåðñèÿ ïðîãðàììû, â äàííîì
ïðèìåðå ðàññìàòðèâàåòñÿ ïðîãðàììíàÿ âåðñèÿ 0,18A
1.1 Ïóëüò óïðàâëåíèÿ
Ðó÷êà äëÿ çàäàíèÿ ïàðàìåòðîâ (òîêà, íàïðÿæåíèÿ, ïðîöåíòîâ, âðåìåíè
èëè ÷àñòîòû)
Äèñïëåé
Âûáîð ñïîñîáà ñâàðêè TIG èëè MMA
Âûáîð TIG-ñâàðêè íà ïåðåìåííîì òîêå (AC) , TIG / MMA-ñâàðêè íà
ïîñòîÿííîì òîêå (DC) èëèTIG-ñâàðêèèìïóëüñíûìòîêîì
Âûáîð âûñîêî÷àñòîòíîãî âîçáóæäåíèÿ äóãè (HF) èëè âîçáóæäåíèÿ
äóãè êîíòàêòíûì ñïîñîáîì (LiftArc)t
Âûáîð 2-òàêòíîãî èëè 4-òàêòíîãî ðåæèìà
RU
bi14d1ra -- 5 --
Íàñòðîéêà ñ ïàíåëè , ñìåíà ïðîãðàììû ñ ïîìîùüþ êóðêîâîãî
ïåðåêëþ÷àòåëÿ ñâàðî÷íîé ãîðåëêè èëè ïîäêëþ÷åíèå áëîêà
äèñòàíöèîííîãî óïðàâëåíèÿ
Âûáîð ïàðàìåòðà, îòîáðàæàåìîãî íà äèñïëåå âî âðåìÿ ñâàðêè: òîêà (A)
èëè íàïðÿæåíèÿ (V)
Îáîçíà÷åíèå ïàðàìåòðà, îòîáðàæàåìîãî íà äèñïëåå (òîê, íàïðÿæåíèå,
ïðîöåíòû, âðåìÿ èëè ÷àñòîòà).
Âûáîð íàñòðàèâàåìîãî ïàðàìåòðà
Èíäèêàöèÿ âûáðàííîãî íàñòðàèâàåìîãî ïàðàìåòðà, ñì. ñòð. 7
Êíîïêè äëÿ ââåäåíèÿ ïàðàìåòðîâ ñâàðêè â çàïîìèíàþùåå óñòðîéñòâî.
Ñì. ñòðàíèöó 13.
2ÑÂÀÐÊÀTIG
2.1 Óñòàâêè
Ñâàðêà TIG áåç èìïóëüñîâ íà ïåðåì. èëè ïîñò. òîêå (AC/DC) è ñ
èìïóëüñàìè ïîñò. òîêà (DC)
Ôóíêöèÿ Äèàïàçîí óñòàâîê Ñòóïåíÿìè ïî: Çíà÷åíèå ïî
óìîë÷àíèþ
HF / LiftArc t
2)
HF èëè LiftArct - LiftArct
2/4 òàêòà
2)
2 òàêòà èëè 4 òàêòà - 2òàêòà
Âðåìÿ ïðåäâàðèòåëüíîé
ïîäà÷è ãàçà
1)
0-5ñ 0,1 ñ 0,5 ñ
Âðåìÿ íàðàñòàíèÿ 0-10ñ 0,1 ñ 0,0 ñ
Âðåìÿ ñïàäà 0-10ñ 0,1 ñ 1,0 ñ
Âðåìÿ ïîäà÷è ãàçà
ïîñëå ïðåêðàùåíèÿ
äóãè
0-25ñ 0,1 ñ 2,0 ñ
Òîê 4 -300 A 1A 60 A
Àêòèâíàÿ ïàíåëü OFF (”Îòêë.”) èëè ON
(”Âêë.”)
- ON (”Âêë.”)
Èçìåíåíèå äàííûõ
ñïóñêîâîãî ìåõàíèçìà
OFF (”Îòêë.”) èëè ON
(”Âêë.”)
- OFF (”Îòêë.”)
Áëîê äèñòàíöèîííîãî
óïðàâëåíèÿ
OFF (”Îòêë.”) èëè ON
(”Âêë.”)
- OFF (”Îòêë.”)
RU
bi14d1ra -- 6 --
TIG íà ïåðåìåííîì òîêå (AC)
Ôóíêöèÿ Äèàïàçîí óñòàâîê Ñòóïåíÿìè ïî: Çíà÷åíèå ïî
óìîë÷àíèþ
Ðåãóëèðîâêà áàëàíñà 50 - 98 %* 1% 50 %
Ðåãóëèðîâêà ÷àñòîòû 10-152 Ãö Ãö øà ãà ìè ï î 0 , 2
ìñ
65 Ãö
Ïðåäâàðèòåëüíûé
ïîäîãðåâ ýëåêòðîäà
1-100 1 -
* ) çàâèñèìîñòè îò íàñòðîéêè ÷àñòîòû.
TIG áåç èìïóëüñîâ ïîñò. òîêà
Ôóíêöèÿ Äèàïàçîí óñòàâîê Ñòóïåíÿìè ïî: Çíà÷åíèå ïî
óìîë÷àíèþ
Òîê èìïóëüñà 4 -300 A 1A 60 A
Äëèòåëüíîñòü èìïóëüñà
Ìèêðîèìïóëüñû
1)
0,01 -2,5 ñ
0,001 -0,250 ñ
0,01
0,001
1,0 ñ
Òîê ïàóçû 4 -300 A 1A 20 A
Äëèòåëüíîñòü ïàóçû
Ìèêðîèìïóëüñû
1)
0,01 -2,5 ñ
0,001 -0,250 ñ
0,01 ñ
0,001
1,0 ñ
1)
Ýòè ôóíêöèè ÿâëÿþòñÿ ñêðûòûìè ôóíêöèÿìè TIG, ñì. ïóíêò 2.3.
2)
Ýòè ôóíêöèè íå ìîãóò áûòü èçìåíåíû â ïðîöåññå ñâàðêè.
2.2 Îáúÿñíåíèå ñèìâîëîâ è ôóíêöèé
Ñâàðêà ìåò îäîì TIG
Ïðè ñâàðêå TIG ïðîèñõîäèò ðàñïëàâëåíèå ìåòàëëà ñâàðèâàåìîé äåòàëè ñ
ïîìîùüþ ýëåêòðè÷åñêîé äóãè, âîçáóæäàåìîé íà âîëüôðàìîâîì ýëåêòðîäå,
êîòîðûé ñàì íå ïëàâèòñÿ. Çîíà ñâàðêè è ñàì ýëåêòðîä çàùèùåíû àòìîñôåðîé
èç çàùèòíîãî ãàçà.
Ïåðåìåííûé òîê
Ïðåèìóùåñòâà ïåðåìåííîãî òîêà ñîñòîÿò â óìåíüøåííîé îïàñíîñòè
ìàãíèòíîãî äóòüÿ è â õîðîøåé ñïîñîáíîñòè ðàçðóøåíèÿ îêèñëà ïðè ñâàðêå
àëþìèíèÿ.
Ïîñòîÿííûé òîê
×åì áîëüøå òîê, òåì øèðå ñâàðî÷íàÿ âàííà è òåì ëó÷øå ïðîíèêíîâåíèå â
ñâàðèâàåìóþ äåòàëü.
RU
bi14d1ra -- 7 --
Èìïóëüñíûé òîê
Èìïóëüñíûé ðåæèì èñïîëüçóåòñÿ äëÿ óëó÷øåíèÿ óïðàâëåíèÿ ñâàðî÷íîé
âàííîé è ïðîöåññîì çàñòûâàíèÿ. ×àñòîòà èìïóëüñîâ óñòàíàâëèâàåòñÿ
íàñòîëüêî íèçêîé, ÷òîáû â ïðîìåæóòêå ìåæäó èìïóëüñàìè ñâàðî÷íàÿ âàííà
óñïåâàëà çàñòûòü, ïî êðàéíåé ìåðå, ÷àñòè÷íî. Äëÿ òîãî ÷òîáû óñòàíîâèòü
èìïóëüñíûé ðåæèì, íåîáõîäèìî çàäàòü ÷åòûðå ïàðàìåòðà: òîê èìïóëüñà,
äëèòåëüíîñòü èìïóëüñà, òîê ïàóçû è äëèòåëüíîñòü ïàóçû.
Çàäàâàåìûå ïàðàìåòðû
1. Íàðàñòàíèå
2. Ñâàðî÷íûé òîê
3. Äëèòåëüíîñòü èìïóëüñà
4. Òîê ïàóçû
5. Äëèòåëüíîñòü ïàóçû
6. Ñïàä
7. Âðåìÿ ïîäà÷è ãàçà ïîñëå ïðåêðàùåíèÿ äóãè
8. Áàëàíñ
9. ×àñòîòà
10. Ïðåäâàðèòåëüíûé ïîäîãðåâ ýëåêòðîäà
Íàðàñòàíèå
Ôóíêöèÿ íàðàñòàíèÿ îçíà÷àåò, ÷òî ïîñëå âîçáóæäåíèÿ äóãè TIG, òîê ìåäëåííî
ïîâûøàåòñÿ äî çàäàííîé âåëè÷èíû. Ýòî îáåñïå÷èâàåò áîëåå ”ïëàâíûé”
ðàçîãðåâ ýëåêòðîäà è äàåò âîçìîæíîñòü ñâàðùèêó ïðàâèëüíî ðàñïîëîæèòü
ýëåêòðîä äî òîãî, êàê áóäåò äîñòèãíóòî çàäàííîå çíà÷åíèå ñâàðî÷íîãî òîêà.
Òîê èìïóëüñà
Áîëüøåå èç äâóõ çíà÷åíèé òîêà ïðè èìïóëüñíîì ðåæèìå.
Òîê
Äëèòåëüíîñòü ïàóçû
Òîê
èìïóëüñà
Òîê ïàóçû Äëèòåëüíîñòü èìïóëüñà Âðåìÿ
Ñâàðêà ìåòîäîì TIG â èìïóëüñíîì ðåæèìå.
Äëèòåëüíîñòü èìïóëüñà
×àñòü ïåðèîäà èìïóëüñà, â òå÷åíèå êîòîðîé âêëþ÷åí òîê èìïóëüñà.
Òîê ïàóçû
Ìåíüøåå èç äâóõ çíà÷åíèé òîêà ïðè èìïóëüñíîì ðåæèìå.
Äëèòåëüíîñòü ïàóçû
Äëèòåëüíîñòü ïðîòåêàíèÿ òîêà ïàóçû, êîòîðàÿ âìåñòå ñ äëèòåëüíîñòüþ
ïðîòåêàíèÿ òîêà èìïóëüñà ñîñòàâëÿåò ïåðèîä èìïóëüñà.
Ñïàä
Ïðè ñâàðêå TIG èñïîëüçóåòñÿ òàêæå ”ñïàä”, âî âðåìÿ êîòîðîãî òîê ”ìåäëåííî”
ñïàäàåò â òå÷åíèå çàäàííîãî âðåìåíè, ÷òî ïîçâîëÿåò èçáåæàòü îáðàçîâàíèÿ
êðàòåðà è/èëè ðàñòðåñêèâàíèÿ ïî çàâåðøåíèè øâà.
RU
bi14d1ra -- 8 --
Çàêëþ÷èòåëüíàÿ ïîäà÷à ãàçà
Ðåãóëèðîâêà âðåìåíè ïîäà÷è çàùèòíîãî ãàçà ïîñëå ïîãàñàíèÿ äóãè.
Áàëàíñ
Ðåãóëèðîâêà áàëàíñà ìåæäó ïîëîæèòåëüíîé (+) è îòðèöàòåëüíîé (-)
ïîëóâîëíîé ïðè ñâàðêå íà ïåðåìåííîì òîêå (AC). Îáåñïå÷èâàåò îïòèìàëüíîå
ïðîïëàâëåíèå. Áîëåå âûñîêèå çíà÷åíèÿ âûçûâàþò áîëüøåå ïðîïëàâëåíèå.
×àñòîòà
Óâåëè÷åíèå ÷àñòîòû ïåðåìåííîãî òîêà äåëàåò äóãó áîëåå îäíîðîäíîé è
ñòàáèëüíîé, ïðèãîäíîé äëÿ ñâàðêè ìàëûì òîêîì è äëÿ ñâàðêè îñîáåííî
òîíêèõ ëèñòîâ.
Ïðåäâàðèòåëüíûé ïîäîãðåâ ýëåêòðîäà
Â
î
ë
ü
ô
ð
à
ì
î
â
û
é
ý
ë
å
ê
ò
ð
î
ä
Çàäàííîå çíà÷åíèå
Â
î
ëü
ô
ðàì
î
âû
é
ýëå
ê
òð
î
ä
Çàùèòíûé ãàç
O Öâåòíîé êîä Òèï Ar Ar + 30%He
1.6 Çåëåíûé WP - -
1.6 Çåëåíûé WP 30 35
1.6 ×åðíûé WL10 20 20
1.6 ×åðíûé WL10 30 35
2.4 Çåëåíûé WP 45 -
2.4 Çåëåíûé WP 55 60
2.4 ×åðíûé WL10 40 40
2.4 ×åðíûé WL10 45 50
3.2 Çåëåíûé WP 55 -
3.2 Çåëåíûé WP 65 65
3.2 ×åðíûé WL10 60 60
3.2 ×åðíûé WL10 70 70
4.0 Çåëåíûé WP 70 75
4.0 Çåëåíûé WP 80 85
4.0 ×åðíûé WL10 65 65
4.0 ×åðíûé WL10 70 75
WP = ýëåêòðîä èç ÷èñòîãî âîëüôðàìà
WL10 = Âîëüôðàìîâûé ýëåêòðîä ñ ïðèñàäêîé ëàíòàíà
RU
bi14d1ra -- 9 --
HF
Ôóíêöèÿ HF âîçáóæäàåò ýëåêòðè÷åñêóþ äóãó ñ ïîìîùüþ èñêðû ñ
âîëüôðàìîâîãî ýëåêòðîäà íà ñâàðèâàåìóþ äåòàëü, êîãäà ýëåêòðîä
ïðèáëèçèòñÿ ê äåòàëè.
LiftArct
Ôóíêöèÿ Lift Arct (”Ïîäíÿòü äóãó”) âîçáóæäàåò äóãó, êîãäà ýëåêòðîä êàñàåòñÿ
ñâàðèâàåìîé äåòàëè, à çàòåì ïðèïîäíèìàåòñÿ íàä íåé.
Âîçáóæäåíèå äóãè ñ ïîìîùüþ ôóíêöèè LiftArc
t
. Øàã 1: ýëåêòðîä êàñàåò ñÿ äå ò àëè. Øàã 2:
íàæàò êóðêîâûé âûêëþ÷àòåëü, è íà÷èíàåò òå ÷ü íåáîëüøîé òîê. Øàã 3: ñâàðùèê îòâîäèò
ýëåêòðîä îò äåòàëè: âîçáóæäàåòñÿ äóãà, è òîê àâòîìàòè÷åñêè ïîâûøàåòñÿ äî çàäàííîãî
çíà÷åíèÿ.
2-òàêòíûé ðåæèì
Ïðåäâàðèòåëüíàÿ
ïîäà÷à ãàçà
Íàðàñò
à-
íèå
Ñïàä Çàêëþ÷èòåëü
íàÿ ïîäà÷à
ãàçà
Äåéñòâóåò ïðè 2-òàêòíîì óïðàâëåíèè ñâàðî÷íîé ãîðåëêîé.
Ïðè 2-òàêòíîì ðåæèìå óïðàâëåíèÿ ïðè íàæàòèè êóðêîâîãî âûêëþ÷àòåëÿ (1)
ãîðåëêè TIG çàïóñêàåòñÿ ïðåäâàðèòåëüíàÿ ïîäà÷à çàùèòíîãî ãàçà (åñëè ýòà
ôóíêöèÿ âêëþ÷åíà), à çàòåì âîçáóæäàåòñÿ ýëåêòðè÷åñêàÿ äóãà. Òîê âîçðàñòàåò
äî çàäàííîãî çíà÷åíèÿ (â ñîîòâåòñòâèè ñ ôóíêöèåé íàðàñòàíèÿ, åñëè îíà
âêëþ÷åíà). Ïðè îòïóñêàíèè êóðêîâîãî âûêëþ÷àòåëÿ (2) òîê ïðåêðàùàåòñÿ (èëè
íà÷èíàåò ñïàäàòü, åñëè âêëþ÷åíà ôóíêöèÿ ñïàäà), è äóãà ãàñíåò. Íà÷èíàåòñÿ
çàêëþ÷èòåëüíàÿ ïîäà÷à ãàçà, åñëè ýòà ôóíêöèÿ âêëþ÷åíà
RU
bi14d1ra -- 1 0 --
4-òàêòíûé ðåæèì
Ïðåäâàðèòåëüíàÿ
ïîäà÷à ãàçà
Íàðàñò
à-
íèå
Ñïàä Çàêëþ÷èòåëü
íàÿ ïîäà÷à
ãàçà
Äåéñòâóåò ïðè 4-òàêòíîì óïðàâëåíèè ñâàðî÷íîé ãîðåëêîé.
Ïðè 4-òàêòíîì ðåæèìå óïðàâëåíèÿ ïðè íàæàòèè êóðêîâîãî âûêëþ÷àòåëÿ (1)
çàïóñêàåòñÿ ïðåäâàðèòåëüíàÿ ïîäà÷à çàùèòíîãî ãàçà (åñëè ýòà ôóíêöèÿ
âêëþ÷åíà) . Ïî îêîí÷àíèè âðåìåíè ïðåäâàðèòåëüíîé ïîäà÷è çàùèòíîãî ãàçà
òîê ïîâûøàåòñÿ äî íà÷àëüíîãî óðîâíÿ (íåñêîëüêî àìïåð), è âîçáóæäàåòñÿ
ýëåêòðè÷åñêàÿ äóãà. Ïðè îòïóñêàíèè êóðêîâîãî âûêëþ÷àòåëÿ (2) òîê
âîçðàñòàåò äî çàäàííîãî çíà÷åíèÿ (ñ ïîñòåïåííûì íàðàñòàíèåì, åñëè
âêëþ÷åíà ñîîòâåòñòâóþùàÿ ôóíêöèÿ). Ïðè ñëåäóþùåì íàæàòèè êóðêîâîãî
âûêëþ÷àòåëÿ (3) òîê ñïàäàåò äî çàäàííîãî íà÷àëüíîãî çíà÷åíèÿ (ïëàâíî, åñëè
âêëþ÷åíà ñîîòâåòñòâóþùàÿ ôóíêöèÿ). Ïðè ñëåäóþùåì îòïóñêàíèè êóðêîâîãî
âûêëþ÷àòåëÿ (4) äóãà ãàñíåò, è ïðîèñõîäèò çàêëþ÷èòåëüíàÿ ïîäà÷à ãàçà.
Àêòèâíàÿ ïàíåëü
Íàñòðîéêè âûïîëíÿþòñÿ ñ ïàíåëè óïðàâëåíèÿ.
Èçìåíåíèå äàííûõ êóðêîâîãî ïåðåêëþ÷àòåëÿ
Ýòà ôóíêöèÿ ïîçâîëÿåò ïåðåéòè îò îäíîãî íàáîðà ñîõðàíåííûõ ïàðàìåòðîâ
ñâàðêè ê äðóãîìó, ïóòåì äâîéíîãî íàæàòèÿ íà ñïóñêîâîé ìåõàíèçì
ñâàðî÷íîãî ïèñòîëåòà.
Ïðèìåíèìî òîëüêî äëÿ ñâàðêè ìåòîäîì TIG.
Áëîê äèñòàíöèîííîãî óïðàâëåíèÿ
Íàñòðîéêè âûïîëíÿþòñÿ ñ áëîêà äèñòàíöèîííîãî óïðàâëåíèÿ.
Äî âêëþ÷åíèÿ ìàøèíû áëîê äèñòàíöèîííîãî óïðàâëåíèÿ äîëæåí áûòü
ïîäêëþ÷åí ê ðàçúåìó äëÿ áëîêà äèñòàíöèîííîãî óïðàâëåíèÿ, êîòîðûé
èìååòñÿ íà ìàøèíå. Ïîñëå ââîäà â äåéñòâèå áëîêà äèñòàíöèîííîãî
óïðàâëåíèÿ, ïàíåëü óïðàâëåíèÿ ñòàíîâèòñÿ íåàêòèâíîé.
RU
bi14d1ra -- 1 1 --
2.3 Ñêðûòûå ôóíêöèè TIG
Íà ïàíåëè óïðàâëåíèÿ èìåþòñÿ ñêðûòûå ôóíêöèè.
Äëÿ äîñòóïà ê ôóíêöèÿì íàæìèòå íà 5 ñåêóíä. Íà äèñïëåå ïîÿâèòñÿ
áóêâà è ÷èñëåííîå çíà÷åíèå. Âûáåðèòå ôóíêöèþ, íàæèìàÿ êëàâèøó ñî
ñòðåëêîé âïðàâî. Êðóãëàÿ ðó÷êà èñïîëüçóåòñÿ äëÿ èçìåíåíèÿ ÷èñëåííîãî
çíà÷åíèÿ âûáðàííîé ôóíêöèè.
Ôóíêöèÿ Óñòàâêè Çíà÷åíèå ïî
óìîë÷àíèþ
A = ïðåäâàðèòåëüíàÿ ïîäà÷à ãàçà 0 -5 ñ 0,5 ñ
b = ìèêðîèìïóëüñ 0 =OFF(ÎÒÊË);1
=ON(ÂÊË)
0
Äëÿ äîñòóïà ê ñêðûòûì ôóíêöèÿì íàæìèòå íà 5 ñåêóíä.
Ïðåäâàðèòåëüíàÿ ïîäà÷à ãàçà
Çàäàíèå ïðîäîëæèòåëüíîñòè ïðåäâàðèòåëüíîé ïîäà÷è çàùèòíîãî ãàçà äî
ìîìåíòà çàæèãàíèÿ äóãè.
Ìèêðîèìïó ëüñ
Äëÿ âûáîðà ìèêðîèìïóëüñà íåîáõîäèìî, ÷òîáû ìàøèíà íàõîäèëàñü â
ðåæèìå èìïóëüñíîãî òîêà . Ïðîäîëæèòåëüíîñòü èìïóëüñà è ïàóçû â
íîðìàëüíîì ðåæèìå óñòàíàâëèâàåòñÿ â ïðåäåëàõ 0,01 2,50 ñåêóíä. Ïðè
ìèêðîèìïóëüñàõ ýòî âðåìÿ ìîæåò áûòü ñîêðàùåíî äî0,001 ñåêóíä. Ïðè
âêëþ÷åííîì ìèêðîèìïóëüñíîì ðåæèìå, ïðîìåæóòêè âðåìåíè ìåíåå 0,25
ñåêóíä îòîáðàæàþòñÿ íà äèñïëåå áåç äåñÿòè÷íîé çàïÿòîé.
3 ÑÂÀÐÊÀ MMA
3.1 Óñòàâêè
Ôóíêöèÿ Äèàïàçîí óñòàâîê Ñòóïåíÿìè ïî: Çíà÷åíèå ïî
óìîë÷àíèþ
Òîê 16 -300 A 1A 100 A
Ãî ð ÿ ÷ è é ï ó ñ ê
1)
0-99 1 0
Äàâëåíèå äóãè
1)
0-99 1 5
Êàïåëüíàÿ ñâàðêà
1)
0=ÎÒÊË èëè 1=ÂÊË - OFF (”Îòêë.”)
Ðåãóëÿòîð ñâàðêè
ArcPlust
1)
1=ÎÒÊË èëè 0=ÂÊË - ON (”Âêë.”)
Àêòèâíàÿ ïàíåëü OFF (”Îòêë.”) èëè ON
(”Âêë.”)
- ON (”Âêë.”)
Áëîê äèñòàíöèîííîãî
óïðàâëåíèÿ
OFF (”Îòêë.”) èëè ON
(”Âêë.”)
- OFF (”Îòêë.”)
1)
Ýòè ôóíêöèè ÿâëÿþòñÿ ñêðûòûìè, ñì. ïóíêò 3.3.
RU
bi14d1ra -- 1 2 --
3.2 Îáúÿñíåíèå ñèìâîëîâ è ôóíêöèé
Ñâàðêà ìåò îäîì ÌMA
Ìåòîä MMA íàçûâàåòñÿ òàêæå ñâàðêîé ïîêðûòûìè ýëåêòðîäàìè. Çàææåííàÿ
äóãà ðàñïëàâëÿåò ýëåêòðîä, è åãî ïîêðûòèå îáðàçóåò çàùèòíûé øëàê.
Ïðè ñâàðêå MMA ìîæíî âàðèòü ñ îáðàòíîé ïîëÿðíîñòüþ.
Âûáåðèòå ñâàðêó MMA, à çàòåì íàæìèòå .
Àêòèâíàÿ ïàíåëü
Íàñòðîéêè âûïîëíÿþòñÿ ñ ïàíåëè óïðàâëåíèÿ.
Áëîê äèñòàíöèîííîãî óïðàâëåíèÿ
Íàñòðîéêè âûïîëíÿþòñÿ ñ áëîêà äèñòàíöèîííîãî óïðàâëåíèÿ.
Äî âêëþ÷åíèÿ ìàøèíû áëîê äèñòàíöèîííîãî óïðàâëåíèÿ äîëæåí áûòü
ïîäêëþ÷åí ê ðàçúåìó äëÿ áëîêà äèñòàíöèîííîãî óïðàâëåíèÿ, êîòîðûé
èìååòñÿ íà ìàøèíå. Ïîñëå ââîäà â äåéñòâèå áëîêà äèñòàíöèîííîãî
óïðàâëåíèÿ, ïàíåëü óïðàâëåíèÿ ñòàíîâèòñÿ íåàêòèâíîé.
3.3 Ñêðûòûå ôóíêöèè MMA
Íà ïàíåëè óïðàâëåíèÿ èìåþòñÿ ñêðûòûå ôóíêöèè.
Äëÿ äîñòóïà ê ôóíêöèÿì íàæìèòå íà 5 ñåêóíä. Íà äèñïëåå ïîÿâèòñÿ
áóêâà è ÷èñëåííîå çíà÷åíèå. Âûáåðèòå ôóíêöèþ, íàæèìàÿ êëàâèøó ñî
ñòðåëêîé âïðàâî. Êðóãëàÿ ðó÷êà èñïîëüçóåòñÿ äëÿ èçìåíåíèÿ ÷èñëåííîãî
çíà÷åíèÿ âûáðàííîé ôóíêöèè.
Ôóíêöèÿ Óñòàâêè Çíà÷åíèå ïî
óìîë÷àíèþ
C = äàâëåíèå äóãè 0 - 99 5
D = êàïåëüíàÿ ñâàðêà 0 =OFF(ÎÒÊË);1 =
ON (ÂÊË)
0
F =ðåãóëÿòîðArcPlust 1 =OFF(ÎÒÊË);0 =
ON (ÂÊË)
0
H = ãîðÿ÷èé çàïóñê 0 - 99 0
Äëÿ äîñòóïà ê ñêðûòûì ôóíêöèÿì íàæìèòå
íà 5 ñåêóíä.
Äàâëåíèå äóãè
Äàâëåíèå äóãè èìååò áîëüøîå çíà÷åíèå äëÿ îïðåäåëåíèÿ òîãî, êàê èçìåíÿåòñÿ
ñèëà òîêà ïðè èçìåíåíèè äëèíû äóãè. ×åì ìåíüøå äàâëåíèå äóãè, òåì äóãà
ñïîêîéíåå, è òåì ìåíüøå ðàçáðûçãèâàíèå.
RU
bi14d1ra -- 1 3 --
Êàïåëüíàÿ ñâàðêà
Ìåòîä êàïåëüíîé ñâàðêè ìîæåò áûòü èñïîëüçîâàí ïðè ñâàðêå ýëåêòðîäàìè èç
íåðæàâåþùåé ñòàëè. Ïðè ýòîì ðåæèìå ïðîèñõîäèò ïîïåðåìåííîå çàæèãàíèå
è ãàøåíèå äóãè, äëÿ òîãî ÷òîáû ëó÷øå êîíòðîëèðîâàòü âûäåëåíèå òåïëà. Äëÿ
òîãî ÷òîáû ïîãàñèòü äóãó, äîñòàòî÷íî íåìíîãî ïðèïîäíÿòü ýëåêòðîä.
Ñâàðî÷íûé ðåãóëÿòîð - ArcPlust
Ñâàðî÷íûé ðåãóëÿòîð ArcPlust ïðåäñòàâëÿåò ñîáîé îðãàí ðåãóëèðîâàíèÿ
íîâîãî òèïà, êîòîðûé ïîçâîëÿåò ïîëó÷èòü áîëåå èíòåíñèâíóþ, áîëåå
êîíöåíòðèðîâàííóþ è ñïîêîéíóþ äóãó. Îíà áûñòðåå âîññòàíàâëèâàåòñÿ ïîñëå
êàïåëüíîãî êîðîòêîãî çàìûêàíèÿ, ÷òî óìåíüøàåò ðèñê ïðèëèïàíèÿ ýëåêòðîäà.
Äëÿ áîëüøèíñòâà ñâàðî÷íûõ ðàáîò ðåãóëÿòîð ArcPlus ïîçâîëÿåò ïîëó÷èòü
íàèëó÷øèå ðåçóëüòàòût ÂÊË (0).
Ãîðÿ÷èé ïóñê
Ãîðÿ÷èé ïóñê óâåëè÷èâàåò ñâàðî÷íûé òîê â òå÷åíèå çàäàííîãî ïðîìåæóòêà
âðåìåíè â íà÷àëå ïðîöåññà ñâàðêè, ñíèæàÿ òåì ñàìûì âåðîÿòíîñòü ïëîõîãî
ñïëàâëåíèÿ â íà÷àëå ñâàðíîãî øâà.
4 ÇÀÏÎÌÈÍÀÞÙÅÅ ÓÑÒÐÎÉÑÒÂÎ ÏÀÐÀÌÅÒÐÎÂ ÑÂÀÐÊÈ
 çàïîìèíàþùåì óñòðîéñòâå ïàíåëè óïðàâëåíèÿ ìîæíî ñîõðàíèòü äâå
ðàçëè÷íûå ïðîãðàììû ïàðàìåòðîâ ñâàðêè.
Íàæìèòå êíîïêó èëè â òå÷åíèå 5 ñåêóíä, äëÿ òîãî ÷òîáû
ñîõðàíèòü äàííûå â ïàìÿòè. Ìèãàíèå çåëåíîãî èíäèêàòîðà ñâèäåòåëüñòâóåò î
òîì, ÷òî ïàðàìåòðû ñâàðêè ñîõðàíåíû â çàïîìèíàþùåì óñòðîéñòâå.
Äëÿ òîãî, ÷òîáû ïåðåéòè îò îäíîãî êîìïëåêòà ñâàðî÷íûõ äàííûõ ê äðóãîìó,
íàæìèòå êíîïêó èëè .
Çàïîìèíàþùåå óñòðîéñòâî äëÿ ñîõðàíåíèÿ ïàðàìåòðîâ ñâàðêè ñíàáæåíî
ýëåìåíòîì ïèòàíèÿ äëÿ àâòîíîìíîé ïîäïèòêè, êîòîðûé îáåñïå÷èâàåò
ñîõðàííîñòü íàñòðîåê äàæå ïîñëå âûêëþ÷åíèÿ ìàøèíû.
5ÊÎÄÛÍÅÈÑÏÐÀÂÍÎÑÒÅÉ
Êîä íåèñïðàâíîñòè ñèãíàëèçèðóåò î âîçíèêíîâåíèè íåèñïðàâíîñòè â
îáîðóäîâàíèè. Îí îòîáðàæàåòñÿ íà äèñïëåå â âèäå áóêâû E, çà êîòîðîé
ñëåäóåò êîäîâûé íîìåð íåèñïðàâíîñòè.
Îòîáðàæàåìûé íîìåð óñòðîéñòâà ïîçâîëÿåò îïðåäåëèòü, â êàêîì óñòðîéñòâå
ïðîèçîøëà íåèñïðàâíîñòü.
Íîìåð êîäà îøèáêè è íîìåð óñòðîéñòâà îòîáðàæàþòñÿ ïîî÷åðåäíî.
Åñëè îáíàðóæåíî íåñêîëüêî íåèñïðàâíîñòåé, íà ýêðàí áóäåò âûâåäåí òîëüêî
êîä ïîñëåäíåé îáíàðóæåííîé íåèñïðàâíîñòè. Äëÿ òîãî ÷òîáû óäàëèòü ñ
äèñïëåÿ îòîáðàæåíèå êîäà íåèñïðàâíîñòè, íàæìèòå ëþáóþ êíîïêó èëè
ïîâåðíèòå ðó÷êó.
RU
bi14d1ra -- 1 4 --
5.1 Ïåðå÷åíü êîäîâ íåèñïðàâíîñòåé
U0 = áëîê ñâàðî÷íûõ
ïàðàìåòðîâ
U2 = èñòî÷íèê ïèòàíèÿ U5 =áëîê
ïåðåìåííîãî òîà
(AC)
U1 = áëîê îõëàæäåíèÿ U4 =áëîê
äèñòàíöèîííîãî
óïðàâëåíèÿ
Êîä
íåèñïðàâíîñòè
Îïèñàíèå U0 U1 U2 U4 U5
4 Áëîê ïèòàíèÿ 5 Â x x
5 Ñëèøêîì âûñîêîå/íèçêîå ïðîìåæóòî÷íîå
íàïðÿæåíèå ïîñòîÿííîãî òîêà
x
6 Âûñîêàÿ òåìïåðàòóðà x x x
7 Âûñîêàÿ òåìïåðàòóðà x
8 Íàïðÿæåíèå ïèòàíèÿ 24/15 Â x x
12 Îøèáêà ñâÿçè (ïðåäóïðåæäåíèå) x x x x
14 Îøèáêà ñâÿçè (øèíà îòêë.) x x x
15 Ïîòåðÿ ñîîáùåíèé x
19 Îøèáêà â ïàìÿòè x
25 Îòñóòñòâèå êîíòàêòà x
26 Ñáîé â ðàáîòå ïðîãðàììû x
29 Îòñóòñòâèå ïîòîêà îõëàæäàþùåé âîäû x x
41 Îòñóòñòâèå êîíòàêòà ñ áëîêîì îõëàæäåíèÿ x
5.2 Îïèñàíèå êîäîâ îøèáîê
Êîä
íåèñï
ðàâíî
ñòè
Îïèñàíèå
E4
U0
U5
Íèçêîå íàïðÿæåíèå ïèòàíèÿ 5 Â
Íàïðÿæåíèå ïèòàíèÿ ñíèçèëîñü äî íåäîïóñòèìîãî óðîâíÿ.
Ïðîöåññ ñâàðêè îñòàíîâëåí, è ïîâòîðíûé åãî ïóñê çàáëîêèðîâàí.
Äåéñòâèÿ: Âûêëþ÷èòå ïèòàíèå îò ñåòè, ÷òîáû ïåðåâåñòè óñòðîéñòâî â èñõîäíîå
ñîñòîÿíèå. Åñëè íåèñïðàâíîñòü íå óñòðàíèëàñü, âûçîâèòå òåõíèêà ïî
îáñëóæèâàíèþ.
E5
U2
Âûõîä ïðîìåæóòî÷íîãî íàïðÿæåíèÿ ïîñòîÿííîãî òîêà çà ïðåäåëû
äîïóñòèìîãî äèàïàçîíà
Ñëèøêîì âûñîêîå èëè íèçêîå íàïðÿæåíèå â ñåòè ïèòàíèÿ. Ñëèøêîì âûñîêîå
íàïðÿæåíèå ìîæåò áûòü âûçâàíî ðåçêèìè êîëåáàíèÿìè â ñåòè ïèòàíèÿ èëè
ñëàáûì èñòî÷íèêîì ïèòàíèÿ (âûñîêàÿ èíäóêòèâíîñòü èñòî÷íèêà ïèòàíèÿ èëè
ïîòåðÿ ôàçû).
Äåéñòâèÿ: Âûçîâèòå òåõíèêà ïî îáñëóæèâàíèþ.
E6
U1
U2
U5
Âûñîêàÿ òåìïåðàòóðà
Ñðàáîòàëà çàùèòà îò òåïëîâîé ïåðåãðóçêè.
Ñâàðî÷íûé ïðîöåññ îñòàíîâëåí è íå ìîæåò áûòü çàïóùåí ïîâòîðíî äî òåõ ïîð,
ïîêà íå ïîíèçèòñÿ òåìïåðàòóðà.
Äåéñòâèÿ: Óáåäèòåñü â òîì, ÷òî îòâåðñòèÿ äëÿ çàáîðà è âûïóñêà îõëàæäàþùåãî
âîçäóõà íå ïåðåêðûòû è íå çàáèòû ãðÿçüþ. Ïðîâåðüòå èñïîëüçóåìûé ðàáî÷èé
öèêë, ÷òîáû óáåäèòüñÿ â òîì, ÷òî îáîðóäîâàíèå íå ïåðåãðóæàåòñÿ.
RU
bi14d1ra -- 1 5 --
Êîä
íåèñï
ðàâíî
ñòè
Îïèñàíèå
E7
U5
Âûñîêàÿ òåìïåðàòóðà
Ñðàáîòàëà çàùèòà îò òåïëîâîé ïåðåãðóçêè.
Ñâàðî÷íûé ïðîöåññ îñòàíîâëåí è íå ìîæåò áûòü çàïóùåí ïîâòîðíî äî òåõ ïîð,
ïîêà íå ïîíèçèòñÿ òåìïåðàòóðà.
Äåéñòâèÿ: Óáåäèòåñü â òîì, ÷òî îòâåðñòèÿ äëÿ çàáîðà è âûïóñêà îõëàæäàþùåãî
âîçäóõà íå ïåðåêðûòû è íå çàáèòû ãðÿçüþ. Ïðîâåðüòå èñïîëüçóåìûé ðàáî÷èé
öèêë, ÷òîáû óáåäèòüñÿ â òîì, ÷òî îáîðóäîâàíèå íå ïåðåãðóæàåòñÿ.
E8
U1
U5
Íåèñïðàâíîñòü â öåïè ïèòàþùåãî íàïðÿæåíèÿ 24 Â/15 Â
Íåäîïóñòèìî âûñîêîå èëè íåäîïóñòèìî íèçêîå íàïðÿæåíèå ïèòàíèÿ.
Ïðîöåññ ñâàðêè îñòàíîâëåí, è ïîâòîðíûé åãî ïóñê çàáëîêèðîâàí.
Äåéñòâèÿ: Âûêëþ÷èòå ïèòàíèå îò ñåòè, ÷òîáû ïåðåâåñòè óñòðîéñòâî â èñõîäíîå
ñîñòîÿíèå. Åñëè íåèñïðàâíîñòü íå óñòðàíèëàñü, âûçîâèòå òåõíèêà ïî
îáñëóæèâàíèþ.
E12
U0
U1
U4
U5
Îøèáêà ñâÿçè (ïðåäóïðåæäåíèå)
Íåçíà÷èòåëüíàÿ íåèñïðàâíîñòü â øèíå CAN bus.
Äåéñòâèÿ: Óáåäèòåñü â îòñóòñòâèè íåèñïðàâíûõ áëîêîâ, ïîäêëþ÷åííûõ ê øèíå
CAN bus. Ïðîâåðüòå êàáåëè. Åñëè íåèñïðàâíîñòü íå óñòðàíèëàñü, âûçîâèòå òåõíèêà
ïî îáñëóæèâàíèþ.
E14
U0
U1
U5
Îøèáêà ñâÿçè (øèíà îòêë.)
Ñåðüåçíàÿ íåèñïðàâíîñòü â øèíå CAN bus.
Äåéñòâèÿ: Óáåäèòåñü â îòñóòñòâèè íåèñïðàâíûõ áëîêîâ, ïîäêëþ÷åííûõ ê øèíå
CAN bus. Ïðîâåðüòå êàáåëè. Åñëè íåèñïðàâíîñòü íå óñòðàíèëàñü, âûçîâèòå òåõíèêà
ïî îáñëóæèâàíèþ.
E15
U0
Ïðîáëåìû ñî ñâÿçüþ (ïîòåðÿíî ñîîáùåíèå)
Ïåðåãðóçêà øèíû CAN bus ñèñòåìû
Äåéñòâèÿ: Åñëè íåèñïðàâíîñòü íå óñòðàíèëàñü, âûçîâèòå òåõíèêà ïî
îáñëóæèâàíèþ.
E19
U0
Îøèáêà â ïàìÿòè
 ñîäåðæèìîì ñóùåñòâóþùåãî çàïîìèíàþùåãî óñòðîéñòâà èìåþòñÿ îøèáêè.
Ñëåäóåò èñïîëüçîâàòü èñõîäíûå äàííûå.
Äåéñòâèÿ: Âûêëþ÷èòå ïèòàíèå îò ñåòè, ÷òîáû ïåðåâåñòè óñòðîéñòâî â èñõîäíîå
ñîñòîÿíèå. Åñëè íåèñïðàâíîñòü íå óñòðàíèëàñü, âûçîâèòå òåõíèêà ïî
îáñëóæèâàíèþ.
E25
U0
Îòñóòñòâèå êîíòàêòà
Îòñóòñòâèå ñîåäèíåíèÿ ïàíåëè óïðàâëåíèÿ ñ áëîêîì ïåðåìåííîãî òîêà.
Ïðîöåññ ñâàðêè ïðåêðàùàåòñÿ.
Äåéñòâèÿ: Åñëè íåèñïðàâíîñòü íå óñòðàíèëàñü, âûçîâèòå òåõíèêà ïî
îáñëóæèâàíèþ.
E26
U0
Ñáîé â ðàáîòå ïðîãðàììû
×òî-òî ìåøàåò ïðîöåññîðó âûïîëíÿòü åãî íîðìàëüíûå ôóíêöèè â ïðîãðàììå.
Ïîâòîðíûé ïóñê ïðîãðàììû ïðîèçâîäèòñÿ àâòîìàòè÷åñêè. Ñâàðî÷íûé ïðîöåññ
áóäåò îñòàíîâëåí. Ýòîò îòêàç íå ïðåïÿòñòâóåò âûïîëíåíèþ ôóíêöèé.
Äåéñòâèÿ: Åñëè íåèñïðàâíîñòü íå óñòðàíèëàñü, âûçîâèòå òåõíèêà ïî
îáñëóæèâàíèþ.
RU
bi14d1ra -- 1 6 --
Êîä
íåèñï
ðàâíî
ñòè
Îïèñàíèå
E29
U0
U1
Îòñóòñòâèå ïîòîêà îõëàæäàþùåé âîäû
Ñðàáîòàëî ðåëå êîíòðîëÿ ïîòîêà.
Ïðîöåññ ñâàðêè îñòàíîâëåí, è ïîâòîðíûé åãî ïóñê çàáëîêèðîâàí.
Äåéñòâèÿ: Ïðîâåðüòå êîíòóð ïîäà÷è îõëàæäàþùåé âîäû è íàñîñ.
E41
U0
Îòñóòñòâèå êîíòàêòà ñ áëîêîì îõëàæäåíèÿ
Ïîòåðÿí êîíòàêò áëîêà ïàðàìåòðîâ ñâàðêè ñ áëîêîì îõëàæäåíèÿ. Ñâàðî÷íûé
ïðîöåññ îñòàíîâëåí.
Äåéñòâèÿ: Ïðîâåðüòå ýëåêòðè÷åñêóþ ñõåìó. Åñëè íåèñïðàâíîñòü íå óñòðàíÿåòñÿ,
âûçîâèòå ñïåöèàëèñòà ïî îáñëóæèâàíèþ.
6 ÇÀÊÀÇ ÇÀÏÀÑÍÛÕ ×ÀÑÒÅÉ
Çàïàñíûå ÷àñòè ìîæíî çàêàçòú ó áëèæàéøåãî ê Âàì ESAB, (ñì. ïåðå÷åíú íà
ïîñëåäíåé ñòðàíèöå äàííîé áðîøþðû).
RU
ENGLISH
-- 1 7 --
TOCe
1 INTRODUCTION 18...................................................
1.1 Control panel 18.............................................................
2 TIG WELDING 19.....................................................
2.1 Settings 19..................................................................
2.2 Symbol and Function explanations 20...........................................
2.3 Concealed TIG functions 24...................................................
3 MMA WELDING 25....................................................
3.1 Settings 25..................................................................
3.2 Symbol and Function explanations 25...........................................
3.3 Hidden MMA functions 25.....................................................
4 WELDING DATA MEMORY 26..........................................
5 FAULT CODES 27.....................................................
5.1 List of fault codes 27..........................................................
5.2 Fault code descriptions 27.....................................................
6 ORDERING SPARE PARTS 28..........................................
ORDERING NUMBER 30.................................................
-- 1 8 --
bi14d1ea
1 INTRODUCTION
The manual describes use of TA24 AC/DC control panel.
For general information about operation see the user’s instructions for the power
source.
When mains power is supplied the unit runs a self diagnosis of the
LEDs and the display, the program version is displayed and in this
example the program version is 0.18A
1.1 Control panel
Knob for setting data (current, voltage, percentage, seconds, or frequency)
Display
Choice of welding method TIG or MMA
Choice of T IG welding with alternating current , TIG / MMA welding with
direct current or TIG welding with pulsed current
Choice of HF start or LiftArct
Choice of 2--stroke or 4--stroke
Setting from panel , program change with torch trigger switch or
connecting remote control unit
Choice of current indication (A) or voltage indication (V) during welding, in the
display
GB
-- 1 9 --
bi14d1ea
Indication of which parameter is shown in the display (current, voltage,
percentage, seconds or frequency)
Choise of setting parameter
Indication of selected setting parameter, see page 20
Buttons for weld data memory. See page 26
2 TIG WELDING
2.1 Settings
TIG without pulsing AC/DC and TIG with pulsing DC
Function Setting range In steps of: Default value
HF / LiftArc t
2)
HF or LiftArct -- LiftArct
2/4--stroke
2)
2strokeor4stroke -- 2stroke
Gas pre flow time
1)
0--5s 0.1 s 0,5 s
Slope up--time 0--10s 0.1 s 0.0 s
Slope down time 0--10s 0.1 s 1.0 s
Gas post flow time 0--25s 0.1 s 2.0 s
Current 4 --300 A 1A 60 A
Active panel OFF or ON -- ON
Changing trigger data OFF or ON -- OFF
Remote control unit OFF or ON -- OFF
TIG with AC
Function Setting range In steps of: Default value
Balance setting 50 -- 98 %* 1% 50 %
Frequency setting 10 -- 152 Hz Hz with 0.2 ms step 65 Hz
Electrode preheating 1 -- 100 1 --
* )Depending of frequency setting.
TIG with pulsing DC
Function Setting range In steps of: Default value
Pulse current 4 --300 A 1A 60 A
Pulse time
Micro pulse
1)
0.01 --2.5 s
0.001 --0.250 s
0,01
0,001
1.0 s
Background current 4 --300 A 1A 20 A
Background time
Micro pulse
1)
0.01 --2.5 s
0.001 --0.250 s
0.01 s
0,001
1.0 s
1)
These functions are concealed TIG functions, see description point 2.3.
2)
These functions cannot be changed while welding is in progress
GB
-- 2 0 --
bi14d1ea
2.2 Symbol and Function explanations
TIG welding
TIG welding melts the metal of the work piece, using an arc struck from a tungsten elec-
trode, which does not itself melt. The weld pool and the electrode are protected by
shielding gas.
Alternating current
The advantages of alternating current are reduced risk of magnetic arc blow and
good oxide break--up capacity when welding aluminium.
Direct current
A higher current produces a wider weld pool, with better penetration into the work
piece.
Pulsed cu rrent
Pulsing is used for improved control of the weld pool and the solidification process.
The pulse frequency is set so slow that the weld pool has time to solidify at least
partially between each pulse. In order to se t pulsing, four parameters are required:
pulse current, pulse time, background current and background time.
Parameter settings
1. Slope up
2. Welding current
3. Pulse time
4. Background current
5. Background time
6. Slope down
7. Gas post flow time
8. Balance
9. Frequency
10. Electrode preheating
Slope up
The slope up function means that, when the TIG arc strikes, the current rises slowly
to the set value. T h is provides ‘gentler’ heating of the electrode, and gives the welder
a chance to position the electrode properly before positioned weld current is
received.
GB
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
in altre lingue
- English: ESAB TA24 AC/DC Origo™ User manual
Documenti correlati
-
ESAB TA24 Origo™ Manuale utente
-
ESAB TA34 Caddy Manuale utente
-
ESAB TA23 Origo™ Manuale utente
-
ESAB CaddyTig 200 Manuale utente
-
ESAB U6 Aristo Manuale utente
-
-
ESAB TA6 Aristo Manuale utente
-
-
-
ESAB A33 Manuale utente