BUTURE JR500 Manuale utente

Tipo
Manuale utente
USER MANUAL
BUTURE JR500 Stick Vacuum Cleaner
[Read this user manual carefully before rst use. Keep this manual for
further guidance in case]
Any question about JR series vacuum cleaner and
BUTURE service, please feel free to contact
JR シリーズ掃除機や BUTURE サービスについてご不明な点
がございましたら、お気軽にお問い合わせください。
English
Deutsch
Français
Italiano
Español
日本語
05-22
23-41
42-61
62-79
80-98
99-116
LANGUAGE
5EN
INTRODUCTION
WARNING
Personal Safety
Electrical Safety
Thank you for purchasing the BUTURE JR500 stick vacuum cleaner.
Please read the user manual carefully before using the product and take
safety protection measures to avoid malfunctions caused by accidental
operation. If the product is given to another person, please make sure to
also include this user manual.
The product provides a free 2-year warranty by default. To extend the
warranty to 3 years, please activated the warranty card in time!
If you have any questions, please contact [email protected].
01. Store it indoors in a dry place and out of the reach of children.
02. This product is suitable for children 10 years old and above. Users with
reduced physical functions, sensory or intellectual abilities, or lack
of experience and knowledge are advised to use the product safely
supervision or guidance and to be aware of the hazards involved.
03. Please pay attention to safety when children or pets near the vacuum
cleaner.
04. Children should not clean or use the product without supervision.
05. Use only manufacturer’s recommended attachments as described in
this manual; misuse or use of any accessory or attachment other than
those recommended may present a risk of personal injury.
06. Take extra care when cleaning stairs.
07. Keep the appliance and accessories away from the hot surface.
08. Do not block the appliances’ openings or hinder airow, keep openings
free of any objects including dust, lint, clothing, ngers (and all parts of
the body).
01. Only use batteries and chargers supplied by the manufacturer.
02. Never modify the charger in any way.
03. Do not pull the cord to disconnect it from a socket, grasp the plug and
6EN
Battery Safety
01. This appliance includes Li-ion batteries, do not incinerate batteries or
expose them to high temperatures, as they may explode.
02. Liquid ejected from the battery may cause irritation or burns.
03. In an emergency contact professional help immediately.
04. Leaks from the battery cells can occur under extreme conditions. Do
not touch any liquid that leaks from the battery. If the liquid gets on
the skin, wash immediately with soap and water. If the liquid gets into
the eyes, ush them immediately with clean water for a minimum of 10
minutes and seek medical attention. Wear gloves to handle the battery
and dispose of it immediately in accordance with local regulations.
05. When the battery pack is not in use, keep it away from paper clips,
coins, keys, nails, screws, or other small metal objects that could make
a connection from one terminal to another.
06. When you dispose of the appliance remove the battery and dispose of
the battery safely in accordance with local regulations.
pull to disconnect it.
04. Keep the charger cord away from hot surfaces and sharp edges.
05. The supply cord cannot be replaced. If the cord is damaged the charger
should be discarded and replaced.
06. Do not handle the charger or the appliance with wet hands.
07. Do not store, or charge the appliance outdoors.
08. The charger must be removed from the socket before removing the
battery, cleaning, or maintaining the appliance.
7EN
CONTENT OF PACKAGE
Please check and confirm the accessories and parts according to the
following sheet before using. If any parts are missing or damaged, please
contact customer service in time.
Part Name Quantity
Main Body 1
Battery Pack 1
Charger 1
Telescopic Aluminum Alloy Tube 1
Electric Brush Head 1
Hard And Soft Bristle Integrated Brush (Installed) 1
Crevice Nozzle 1
Soft Bristle Brush 1
Filter Cleaning Brush Tool 1
Hepa Filter 2
Air Filter (Installed) 1
Screws (Used to install wall mount stand) 4
Wall Mount Stand 1
User Manual 1
8EN
KNOW YOUR PRODUCT
Charger
Telescopic Tube
Dust Cup
Handle Unit
Battery Release Button
Battery
Length Adjustment Button
Floor Brush Release Button
Electric Brush Head
Hard And Soft Bristle Integrated
Brush (Installed)
ON/OFF Button
Suction Adjustment Button
LED Indicators
Dust Cup Cover Release
Button
Dust Cup Release Button
Tube Release Button
Crevice Nozzle Soft Bristle Brush
Small Cleaning
Brush
Wall Mount
Stand
9EN
Number Name Introduction
ON/OFF Button Turn on/off the vacuum cleaner
Suction Adjustment Button To change suction power
LED Indicators
The color of the indicator light represents the
suction level: Lowest level (white) - Mid level
(light blue) - Highest level (blue)
The number of indicator lights represents the
battery power
Dust Cup Release Button To separate the dust cup from the main body
Dust Cup /
Dust Cup Cover Release
Button To release dust cup cover
Tube Release Button To separate the telescopic tube from the main
body
Telescopic Tube Could be adjusted the length according to
different needs
Floor Brush Release Button To separate the oor brush from the telescopic
tube
Electric Brush Head /
Handle Unit /
Battery Release Button To separate the battery from the handle
Battery /
Length Adjustment Button Press down to adjust the length of telescopic
tube
Crevice Nozzle Remove dust in hard-to-reach area, such as
window gaps, bottom of beds, sofa crevice,
drawers, etc.
Soft Bristle Brush Clean the surfaces of soft materials, such as
sofas, beds, curtains, fabrics, etc.
Small Cleaning Brush Sweep away the dust on brushes and dust cup
Wall Mount Stand Installed on the wall for easy storage of the
vacuum cleaner
Hard And Soft Bristle
Integrated Brush
(Installed)
Used on hard or soft surfaces, such as wood
oors, cement oors, carpets, and sofas
Charger Battery charging adapter
10EN
CHARGING
Turn off the power before charging.
Only charge with the original charger to avoid damage to the vacuum
cleaner. Please conrm the vacuum is fully charged before using.
To ensure the normal operation of the product, charge the battery for more
than 5 hours before rst use.
The battery is installed on the vacuum cleaner. Plug the power adapter to
charge.
The battery could be charged separately without installing it in the
vacuum cleaner. Plug the power adapter to charge.
1. Two charging ways:
2. While charging, the three LED Indicators keep ashing until
the battery is fully charged.
3. When the battery is fully charged, the three LED Indicators
will turn off after about 15 seconds.
Attention:
When the ON/OFF Button is pressed, the vacuum cleaner does not run
and just one of the three LED indicators is ashing, the battery needs to
be charged.
11 EN
ASSEMBLING
1. Install the Dust Cup
2. Install the Battery
3. Connect the Telescopic Tube
Align the buckle and press down. A click can be heard when installed in
place.
Insert the battery pack into the notch under the handle of the vacuum
cleaner. A click can be heard when installed in place.
Insert the telescopic tube into the main body and make sure it is secure.
Press the release button, the telescopic tube can be removed.
Ka da
Ka da
Ka da
Ka da
12EN
4. Connect Clean Heads
To clean sofas and beds, the clean head can be assembled directly with
the main body without the telescopic tube.
To clean floors, stairs and high places, it’s suggested to connect with
telescopic tube.
K
a
d
a
K
a
d
a
Ka da
Ka da
Warning:
The electric oor brush contains moving parts! To avoid personal injury,
do not touch the rolling brush when the vacuum cleaner is running.
Touching the rotating brush may cause cuts, injuries, or other injuries.
Turn off the vacuum cleaner during maintenance. Pay attention to the
safety of children nearby when using.
Ka d
a
13 EN
USING
1. Choose a brush head according to your needs.
2. Aim the clean head at the object to be cleaned. Before
turning it on, check whether there are sharp objects stuck on
the roller brush to avoid scratching the oor.
Do not let the rubbish exceed the "MAX" capacity of the dust cup.
Keep the suction nozzle unobstructed and avoid blockage.
Otherwise, the motor will overheat or be damaged, causing danger.
14EN
3. Press the ON/OFF button to activate the vacuum cleaner at
the lowest mode.
4. Press the suction adjustment button to change the suction
mode according to clean needs.
ON/OFF
Press the speed control button to adjust to medium speed, the LED
indicator lights light blue.
Press the speed control button to high speed, the LED indicator lights blue.
Press the speed control button to come back to the low speed, the LED
indicator lights white.
Lowest level (white)
x1 Mid level (light blue)
x2 Highest level (blue)
15 EN
5. Adjust the length of the tube according to different needs.
6. After cleaning, press the ON/OFF button to turn off the
vacuum cleaner.
Press the button behind the tube and pull out the tube at the same time
to extend the tube.
Press the button and pull the tube back to shorten the tube.
CLEANEING
1. Empty the Dust Cup
To maintain good suction power, please empty the dust cup and clean the
lter after each use.
Do not use the vacuum cleaner without a lter installed.
After stopping the vacuum, place the vacuum cleaner above the trash
can and press the release button on the dust cup to open the dust cup lid,
dump out the trash.
16EN
2. Clean up HEPA Filters and Metal Filters
When there is hair ber winding on the metal lter, and there is obvious dust
on the surface of the HEPA lter, please clean it up in time.
If the HEPA lter is full of dust, the dust will enter the motor,
and the motor will be blocked, heated, losing the suction
power.
Push the dust cup release button to remove the dust cup.
Take off the HEPA filter first, then remove the metal filter in a clockwise
direction.
Clean the HEPA lter, gently tap or brush off the dust with the small cleaning
brush.
Wash the HEPA lter and the metal lter with warm water.
Dry the lters in a ventilated area for 24 hours.
Check the lter frequently
Disassembly of dust cup
After cleaning up, close the dust cup lid. A click will be heard when it is
completely closed.
Tips: Please clean the lter in time, the use of a clean lter can make the
vacuum cleaner maintain the best suction effect. Or contact the after-sales
service by e-mail to purchase a new lter.
Tips:
Do not wash with dirty water.
Do not leave the metal lter and HEPA lter in a damp place.
Do not speed up the drying of the lter by exposing it to the sun or using a
hairdryer, as this may damage the lter and shorten its service life.
② ③
17 EN
Warning:
HEPA lters and lters must be used after drying.
Using the wet lter may cause product damage or other personal injury
and property damage.
1min
24h
Place the clean and thoroughly dried HEPA lter and the metal lter back
into the dust cup.
Screw the metal lter counter-clockwise into the dust cup.
Installation of dust cup
② ③
Note:
The function of the air lter element is to allow the device to dissipate heat
and dredge the air more effectively during operation, without frequent
cleaning. If necessary, press the air lter release button to remove the air
lter.
18EN
3. Clean up Electric Brush Head
Tips: After using for a period of time, the ground brush may be wrapped
with threads, hair, fibers, and other debris, which will directly affect the
cleaning effect. Please clean up in time.
Make sure the vacuum cleaner is turned off. Press the brush release
button to remove the floor brush and flip the brush to reveal the roller
brush.
Flicking the roller brush release button to the “unlock” position. Remove
the small cover on the right sight of the oor brush.
Remove the roller brush and remove the debris wrapping on the roller
brush. Use the small cleaning brush to sweep away the trash on the roller.
Ka d
a
19 EN
After cleaning, install the roller brush into the oor brush.
First put the left side of the roller brush into the left connector.
Then press the right side of the roller brush into place.
Finally, install the small cover. When installed in place, you can hear a click.
4. Clean up the Blocked Extension Tube
Press the tube release button to detach the tube from the electric oor
brush.
Remove blocked adhered to the two inlets inside of the tube, such as
debris and pet hair.
Note :
There are wires installed inside the extension tube to power the electric
oor brush. Do not use sharp tools to clean the extension tube.
20EN
MAINTENANCE
TROUBLESHOOTING
01. The lter can be cleaned with warm water. After cleaning, it must be
thoroughly dried before use. Do not immerse the main unit in water or
any liquid.
02. Clean the vacuum cleaner casing only with a soft, slightly damp cloth.
03. Do not allow any liquid substances to enter the vacuum cleaner.
04. Do not use any corrosive chemicals or abrasives.
05. It is recommended to change the HEPA lter every 2 months (depending
on use) to ensure optimum performance. Do not use the HEPA lter or
metal lter when it is damaged or worn out.
If there is any problem during use, please check the following troubleshooting
table.
If the problem can't be solved, please contact the after-sales email:
Warning:
Turn off the vacuum cleaner before maintenance. Otherwise it may
cause electric shock or other personal injury.
Blockage Protection:
When the vacuum cleaner is blocked, it will automatically
stop working, then the three indicator lights will light up 5
times at the same time.
Please clean the dust cup, filter, telescopic tube and floor
brush thoroughly and promptly.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121

BUTURE JR500 Manuale utente

Tipo
Manuale utente