Pioneer SDA-11DAB Manuale utente

Marca: Pioneer

Modello: SDA-11DAB

Categoria: Cellulari

Tipo: Manuale utente

DAB+ Digital Radio Adaptor with Bluetooth

SDA-11DAB Operation Manual

Declaration of Conformity with regard to the Radio

Equipment Directive 2014/53/EU

Manufacturer:

Pioneer Corporation

28-8, Honkomagome 2-chome, Bunkyo-ku,

Tokyo 113-0021, Japan

[*] SDA-11DAB

English:

Hereby, Pioneer declares that the radio equipment type [*] is in compliance

with Directive 2014/53/EU. The full text of the EU declaration of

conformity is available

at the following internet address: http://www.pioneer-car.eu/compliance

Suomi:

Pioneer vakuuttaa, että radiolaitetyyppi [*] on direktiivin 2014/53/EU

mukainen.

EU-vaatimustenmukaisuusvakuutuksen täysimittainen teksti on saatavilla

seuraavassa internetosoitteessa: http://www.pioneer-car.eu/compliance

Nederlands:

Hierbij verklaar ik, Pioneer, dat het type radioapparatuur [*] conform is met

Richtlijn 2014/53/EU. De volledige tekst van de EU-conformiteitsverklaring

kan worden geraadpleegd op het volgende internetadres:

http://www.pioneer-car.eu/compliance

Français:

Le soussigné, Pioneer, déclare que l’équipement radioélectrique du type [*]

est conforme à la directive 2014/53/UE. Le texte complet de la déclaration

UE de conformité est disponible à l’adresse internet suivante:

http://www.pioneer-car.eu/compliance

Svenska:

Härmed försäkrar Pioneer att denna typ av radioutrustning [*]

överensstämmer med direktiv 2014/53/EU. Den fullständiga texten till EU-

försäkran om överensstämmelse finns på följande webbadress:

http://www.pioneer-car.eu/compliance

Dansk:

Hermed erklærer Pioneer, at radioudstyrstypen [*] er I overensstemmelse

med direktiv 2014/53/EU. EU-overensstemmelseserklæringens fulde tekst

kan finds på følgende internetadresse: http://www.pioneer-

car.eu/compliance

EU Representative’s & Importer:

Pioneer Europe NV

Haven 1087, Keetberglaan 1, 9120

Melsele, Belgium

http://www.pioneer-car.eu

Deutsch:

Hiermit erklärt Pioneer, dass der Funkanlagentyp [*] der Richtlinie

2014/53/EU entspricht. Der vollständige Text der EU-

Konformitätserklärung ist unter der folgenden Internetadresse verfügbar:

http://www.pioneer-car.eu/compliance

Ελληνικά:

Με την παρούσα ο/η Pioneer, δηλώνει ότι ο ραδιοεξοπλισμός [*] πληροί την

οδηγία 2014/53/ΕΕ. Το πλήρες κείμενο της δήλωσης συμμόρφωσης ΕΕ

διατίθεται στην ακόλουθη ιστοσελίδα στο διαδίκτυο: http://www.pioneer-

car.eu/compliance

Italiano:

Il fabbricante, Pioneer, dichiara che il tipo di apparecchiatura radio [*] è

conforme alla direttiva 2014/53/UE. Il testo completo della dichiarazione di

conformità UE è

disponibile al seguente indirizzo Internet: http://www.pioneer-

car.eu/compliance

Español:

Por la presente, Pioneer declara que el tipo de equipo radioeléctrico [*] es

conforme con la Directiva 2014/53/UE. El texto completo de la declaración

UE de conformidad

está disponible en la dirección Internet siguiente: http://www.pioneer-

car.eu/compliance

Português:

O(a) abaixo assinado(a) Pioneer declara que o presente tipo de equipamento

de rádio [*] está em conformidade com a Diretiva 2014/53/UE. O texto

integral da declaração de conformidade está disponível no seguinte endereço

de Internet: http://www.

pioneer-car.eu/compliance

Čeština:

Tímto Pioneer prohlašuje, že typ rádiového zařízení [*] je v souladu se

směrnicí 2014/53/EU. Úplné znění EU prohlášení o shodě je k dispozici na

této internetové adrese: http://www.pioneer-car.eu/compliance

Eesti:

Käesolevaga deklareerib Pioneer, et käesolev raadioseadme tüüp [*] vastab

direktiivi 2014/53/EL nõuetele. ELi vastavusdeklaratsiooni täielik tekst on

kättesaadav järgmisel internetiaadressil: http://www.pioneer-

car.eu/compliance

Magyar:

Pioneer igazolja, hogy a [*] típusú rádióberendezés megfelel a 2014/53/EU

irányelvnek.

Az EU-megfelelőségi nyilatkozat teljes szövege elérhető a következő

internetes címen: http://www.pioneer-car.eu/compliance

Latviešu valoda:

Ar šo Pioneer deklarē, ka radioiekārta [*] atbilst Direktīvai 2014/53/ES.

Pilns ES atbilstības deklarācijas teksts ir pieejams šādā interneta vietnē:

http://www.pioneer-car.eu/compliance

Lietuvių kalba:

Aš, Pioneer, patvirtinu, kad radijo įrenginių tipas [*] atitinka Direktyvą

2014/53/ES.

Visas ES atitikties deklaracijos tekstas prieinamas šiuo interneto adresu:

http://www.pioneer-car.eu/compliance

Malti:

B’dan, Pioneer, niddikjara li dan it-tip ta’ tagħmir tar-radju [*] huwa

konformi mad-Direttiva 2014/53/UE. It-test kollu tad-dikjarazzjoni ta’

konformità tal-UE huwa

disponibbli f’dan l-indirizz tal-Internet li ġej: http://www.pioneer-

car.eu/compliance

Slovenčina:

Pioneer týmto vyhlasuje, že rádiové zariadenie typu [*] je v súlade so

smernicou 2014/53/EÚ. Úplné EÚ vyhlásenie o zhode je k dispozícii na

tejto internetovej adrese: http://www.pioneer-car.eu/compliance

Slovenščina:

Pioneer potrjuje, da je tip radijske opreme [*] skladen z Direktivo

2014/53/EU.

Celotno besedilo izjave EU o skladnosti je na voljo na naslednjem spletnem

naslovu: http://www.pioneer-car.eu/compliance

Română:

Prin prezenta, Pioneer declară că tipul de echipamente radio [*] este în

conformitate cu Directiva 2014/53/UE. Textul integral al declarației UE de

conformitate este

disponibil la următoarea adresă internet: http://www.pioneer-

car.eu/compliance

български:

С настоящото Pioneer декларира, че този тип радиосъоръжение [*] е в

съответствие с Директива 2014/53/ЕС. Цялостният текст на ЕС

декларацията за съответствие може да се намери на следния интернет

адрес: http://www.pioneer-car.eu/compliance

Polski:

Pioneer niniejszym oświadcza, że typ urządzenia radiowego [*] jest zgodny

z dyrektywą 2014/53/UE. Pełny tekst deklaracji zgodności UE jest dostępny

pod

następującym adresem internetowym: http://www.pioneer-

car.eu/compliance

Norsk:

Herved Pioneer erklærer at radioutstyr type [*] er i samsvar med direktiv

2014/53/EU.

Den fullstendige teksten i EU-samsvarserklæringen er tilgjengelig på

følgende internettadresse: http://www. pioneer-car.eu/compliance

Íslenska:

Hér með Pioneer lýsir yfir að tegund þráðlausan búnað [*] er í samræmi við

tilskipun 2014/53/ESB. The fullur texti af ESB-samræmisyfirlýsingu er í

boði á eftirfarandi veffangi: http://www.pioneer-car.eu/compliance

Hrvatski:

Pioneer ovime izjavljuje da je radijska oprema tipa [*] u skladu s

Direktivom 2014/53/EU. Cjeloviti tekst EU izjave o sukladnosti dostupan je

na sljedećoj internetskoj adresi: http://www.pioneer-car.eu/compliance

Türk:

Burada. Pioneer radyo ekipmani turunun [*] 2014/53/EU direktiflerine

uyumlu oldugunu beyan eder. Avrupa uyumluluk beyaninin tam metni

belirtilen

internet sitesinde mevcuttur: http://www.pioneer-car.eu/compliance

English:

[Bluetooth specifications]

Output power: +4 dBm Maximum (Power class 2)

Frequency band(s): 2 400 MHz to 2 483.5 MHz

Français:

[Spécifications Bluetooth]

Puissance de sortie : +4 dBm maximum (Classe de

puissance 2)

Bande(s) de frequences : 2 400 MHz a 2 483,5 MHz

Italiano:

[Specifiche Bluetooth]

Potenza continua: +4 dBm massimo (classe di potenza 2)

Banda di frequenza: da 2 400 MHz a 2 483,5 MHz

Español:

[Especificaciones de Bluetooth]

Potencia de salida: +4 dBm maximo (clase de potencia 2)

Banda(s) de frecuencia: de 2 400 MHz a 2 483,5 MHz

Deutsch:

[Bluetooth-Spezifikationen]

Ausgangsleistung: maximal +4 dBm (Leistungsklasse 2)

Frequenzband/-bander: 2 400 MHz bis 2 483,5 MHz

Nederlands:

[Bluetooth-specificaties]

Uitgangsvermogen: +4 dBm maximaal (vermogensklasse 2)

Frequentieband(en): 2 400 MHz tot 2 483,5 MHz

English:

[FM transmitter specifications]

Output power: 50 nW e.r.p. (-43 dBm e.r.p.) maximum

Frequency band(s): 87,6 MHz to 107,9 MHz

Français:

[Spécifications transmetteur FM]

Puissance de sortie : 50 nW e.r.p. (-43 dBm e.r.p.) maximum

Bande(s) de frequences : 87,6 MHz to 107,9 MHz

Italiano:

[Specifiche Trasmettitore fm]

Potenza continua: 50 nW e.r.p. (-43 dBm e.r.p.) massimo

Banda di frequenza: 87,6 MHz to 107,9 MHz

Español:

[Especificaciones de transmisor FM]

Potencia de salida: 50 nW e.r.p. (-43 dBm e.r.p.) maximo

Banda(s) de frecuencia: 87,6 MHz to 107,9 MHz

Deutsch:

[FM-Sender -Spezifikationen]

Ausgangsleistung: maximal 50 nW e.r.p. (-43 dBm e.r.p.)

Frequenzband/-bander: 87,6 MHz to 107,9 MHz

Nederlands:

[FM-zender -specificaties]

Uitgangsvermogen: 50 nW e.r.p. (-43 dBm e.r.p.) maximaal

Frequentieband(en): 87,6 MHz to 107,9 MHz

Dansk

[FM-sender specifikationer]Udgangseffekt: 50 nW e.r.p. (-43 dBm e.r.p.)

maksimum Frekvensbånd (er): 87,6 MHz til 107,9 MHz

English

This guide is intended to guide you through the basic functions of this unit.

For details, please refer to the operation manual stored on the website.

http://www.pioneer-car.eu

Before You Start

Thank you for purchasing this PIONEER product.

To ensure proper use, please read through this guide before using this

product. It is especially important that you read and observe WARNINGS

and CAUTIONS in this guide. Please keep the guide in a safe and

accessible place for future reference.

If you want to dispose this product, do not mix it with general household

waste. There is a separate collection system for used electronic products in

accordance with legislation that requires proper treatment, recovery and

recycling.

Private households in the member states of the EU, in Switzerland and

Norway may return their used electronic products free of charge to

designated collection facilities or to a retailer (if you purchase a similar new

one).

For countries not mentioned above, please contact your local authorities for

the correct method of disposal. By doing so you will ensure that your

disposed product undergoes the necessary treatment, recovery and recycling

and thus prevent potential negative effects on the environment and human

health.

WARNING

 Do not attempt to service this product by yourself. Servicing of

this product by persons without training and experience in

electronic equipment and automotive accessories may be

dangerous and could expose you to the risk of electric shock,

injury or other hazards.

 Do not attempt to operate the unit while driving. Make sure to pull off

the road and park your vehicle in a safe location before attempting to

use the controls on the device.

CAUTION

 Do not allow this unit to come into contact with moisture and/or

liquids. Electrical shock could result. Also, damage to this unit,

smoke, and overheating could result from contact with liquids.

 Always keep the volume low enough to hear outside sounds.

 This product is evaluated in moderate and tropical climate condition

under the Audio, video and similar electronic apparatus - Safety

requirements, EN62368-1

The SDA-11DAB is designed to be used with the provided dual USB

power adaptor only.

If you experience problems

Should this unit fail to work properly, please contact your dealer or

nearest authorised PIONEER Service Station

Safety Instructions

1. Do not use this product near water.

2. Clean with dry cloth.

3. Do not block any ventilation openings.

4. Do not use near heat objects.

5. Use only accessories provided by manufacturer.

6. Do not allow this product to become exposed to water, steam, sand

or other environmental hazards.

7. Do not leave this product where excessive heat could cause damage.

8. Make sure that nothing affects the operation of the air bags or

vehicle operating systems, safety feature or hazard lamps.

Pioneer is not liable for any damage, due to installation or use of the

product.

Control Unit and Connectors

Controls

Included in the box

1. Main unit, DAB+ adaptor

2. DAB+ active antenna

3. Micro USB Power Cable

4. 3.5mm Audio Cable

5. Dual USB power adaptor

6. Dash mount stand

7. Windscreen mount stand

8. Installation tool

9. Cleaning wipes

10. Safety strap

Note: All accessories are designed to work specifically with SDA-

11DAB. Please do not use third party accessories as these may not

work and cause negative impact to DAB reception performance.

1. The antenna should be mounted vertically along the A-Pillar as

indicated in the diagram. ATTENTION! Correct antenna

installation is important for good DAB+ reception.

2. Gently lower the car roof liner with the help of the provided

installation tool, insert the magnetic grounding tap and ensure the

magnetic tap contacts to the metal roof of the car. Since it is

magnetic, it should “click” into place. Make sure the magnetic

grounding tap is straight after attaching it to the roof of the car.

3. Ensure the windshield is clean and dry before attaching the

antenna on the glass. Do not stick down the antenna before

you are sure that the glass lets the signal through, and where

you stick it, make sure the antenna film does not overlap

with the heating wires, which will affect the reception

performance.

4. Now remove the adhesive backing from the antenna

amplifier box and stick to the dry windshield glass, gently

applying pressure to remove any air bubbles.

5. Install the antenna cable behind the A-Pillar with the help of

installation tool and connect it to Pioneer SDA-11DAB

6. Do not attach the DAB+ antenna over heating wires, in a

place that obstructs the driver's view, or in a place that can

experience interference from metal.

Note: Ensure that the signal gets through the window. Heat wires

and certain forms of shading or sun filter, may cause the signal to

not pass through.

Antenna cable installed

inside

A-Pillar

Antenna film

Antenna Amplifier Box

Magnetic grounding tap

Antenna cable

Antenna amplifier box

Antenna film

Dashboard Mounting

1. Bond strength is dependent upon the amount of adhesive-to-

surface contact developed. Apply firm application pressure

to develop better adhesive contact & thus improving bond

strength.

2. To obtain optimum adhesion, the dashboard bonding

surfaces must be clean and dry.

3. Application to surfaces at temperatures below 10°C (50°F) is

not recommended because the adhesive becomes too firm to

adhere readily. However once correctly applied low

temperatures holding is generally satisfactory.

Windscreen Mount and Safety Strap

1. To obtain optimum adhesion, make sure the windscreen is

fully clean and dry using the supplied cleaning wipe.

2. To avoid the windscreen mount from falling down, and

damaging your dashboard, you may attach the windscreen

mount to the safety strap (included in the box), for additional

safety.

Frequently Used Operations

Button

Operation

Rotary

Commander

- Rotate for navigating the menus.

- Rotate for the previous/next station.

- Press to confirm operation, play/pause or

answer/end a call.

- Long press to reject a call, or activate BT

pairing mode when in BT source.

- In DAB station list, long press to activate

ABC search.

Return

Button

- Long press to instantly dim the LCD and

button illumination brightness.

- Press to confirm and return to previous

menus or to cancel an active Traffic

Announcement.

- In DAB source, press to show a list of

DAB stations.

Button

- Long press to enter menu settings.

- Press to change audio source.

Preset

Buttons

- Long press to store preset stations.

- Press to recall preset stations.

Next Preset

Row Button

- Press to switch to the next row of presets

(1-3 / 4-6).

Display Indication

DAB signal level.

Bluetooth is activated.

DAB Traffic Announcement (TA) is

activated.

DAB Service Following (SF) is

activated .

87.5MHz

FM transmission frequency.

Handsfree voice is via the car speakers.

Handsfree voice through the built-in

speaker.

Line Out to car stereo

Aux-In to the SDA-11DAB

Operation

SDA-11DAB

1. Mount the SDA-11DAB to the windshield or dashboard.

2. Connect the antenna to the antenna input at the back of SDA-

11DAB

3. Connect the USB power supply cable to the back of SDA-

11DAB and the other end to the dual USB power adaptor.

Plug the dual USB power adaptor to the vehicle 12V cigar-

lighter socket.

4. Turn on the power switch on the top of the unit and the

device will automatically scan for DAB+ channels and store

them in the memory of the device.

5. Once the auto scan is completed, you can select any available

DAB+ station using the “ROTARY COMMANDER”.

Connecting SDA-11DAB to Vehicle Stereo Using FM-

Transmission:

1. The default setting is 87.6 MHz. Press and hold the “MENU”

button to enter menu settings, use the “ROTARY

COMMANDER” to select “System Settings”, then “Audio

Out”, then select “FM Transmitter”. Press and hold

“ROTARY COMMANDER” to activate the automatic

scanning of a “vacant” FM transmission frequency, should

you wish to change the FM frequency.

2. After auto scanning has completed, and a “vacant” frequency

is found, press the “RETURN” button to confirm and return to

the previous menu, or it will automatically confirm and exit

the setting after 3 seconds. The selected “vacant” frequency

will be shown at the top of the display, e.g. 87.6MHz

3. Tune your vehicle FM radio system to match the selected

“vacant” frequency for transmission of the audio signal from

SDA-11DAB to your car stereo audio system wirelessly via

FM.

Select FM Transmitting Frequency (Manual Mode):

1. Press and hold the “MENU” button to enter menu, use the

“ROTARY COMMANDER” to select “System Settings” and

“Audio Out” and then select “FM Transmitter”, turn

“ROTARY COMMANDER” to select your vacant frequency

(based on your experience with known vacant frequencies in

your area) which you would like to receive by your car stereo.

2. Once it is selected, press the “RETURN” button to confirm

and goes to previous menu or the screen will go back to

DAB+ source automatically after 3 seconds and the selected

frequency will be shown at the top of the display, e.g.

87.6MHz.

Note: “Vacant frequency” means there is no FM radio broadcasting

content or noise when the frequency is selected.

Connecting SDA-11DAB to Vehicle Stereo Using AUX

Cable (Line-Out):

1. Press and hold the “MENU” button to enter menu setting, use

the “ROTARY COMMANDER” to select “System Settings”,

then “Audio Out” and then select “Line Out”. Press

“ROTARY COMMANDER”. To confirm, press “RETURN”

button to return to previous menu. The line out icon “ ”

will be displayed at the top of the display.

2. Connect the supplied 3.5mm Aux cable to the “LINE OUT”

connector of the SDA-11DAB and the other end of the cable into the

AUX-IN input on your vehicle stereo system. Change the vehicle

stereo source to AUX to enjoy audio sound from the SDA-11DAB,

through your vehicle speakers.

Note: In “Line Out” mode, there is no FM transmission to the

vehicle stereo. Audio is transferred via the cable instead.

Tuning DAB+ Stations/Services:

1. Press the “MENU” button until “DAB+ Radio” source is

selected.

2. Use the “ROTARY COMMANDER” to select the desired

DAB+ station

3. Or press and hold “MENU” button to select “Station List” and

use “ROTARY COMMANDER” to select the desired DAB+

station and press the “ROTARY COMMANDER” button to

confirm. Press “RETURN” button to return back to the

previous/main menu.

DAB Alphabetical (ABC) Stations Search:

1. In DAB source, press “RETURN” button to bring up the station

list, or press and hold “MENU” button enter menu and select

“Station List”, In either of these two modes, press and hold

“ROTARY COMMANDER” to show ABC in middle of the

screen,

2. Turn “ROTARY COMMANDER” to select the desired

alphabetic letter, then press “ROTARY COMMANDER” again

to search for a list of DAB stations with that desired alphabetic

letter. (If no station starting with the chosen letter is available,

“Not found” is displayed. Please select another letter or station).

3. Turn “ROTARY COMMANDER” to select a specific station

and press it again to confirm. Press “RETURN” button to exit

menu.

Updating DAB+ Station List:

1. Press and hold the “MENU” button to enter menu and to select

“DAB Settings”, then “List Update” to perform an auto scan of

all available stations.

Note: For normal use, you do not have to perform the

“Updating Stations” every time you use the car DAB+ radio

unless there are newly added DAB+ channels, then you may

need to perform the “Updating Stations” again.

Note: For normal use, you don’t have to perform the “Updating

Stations” every time you use SDA-11DAB, unless there are newly

added DAB+ channels, then you may need to perform the “Updating

Stations” again.

Service Information: DAB+ source:

The Service Information display -The Service Information data will be

displayed with scrolling text which is being broadcasted from the

station. While listening to DAB+, the display will show the followings

if applicable:

1. Channel Name

2. Multiplex Name（DLS）

3. Signal Strength

4. FM Transmitting Frequency

5. Bluetooth Connection Status

6. Audio Out/In Status Indicator

7. Service Following On status

8. Traffic Announcements ON status

9. Hands free audio output selection

10. Time and date

11. Preset station name in short form

Display Time and Date:

1. In DAB source, whenever the Rotary Commander is rotated,

the last line of the LCD display will show the time and date

which is broadcasting from the DAB station. After 3 seconds,

the last line will automatically return to show the short form of

the DAB preset station name.

2. If there is no preset stored, the last line of LCD display will

always show time and date.

Service Following (SF) ON/OFF:

1. Press and hold “MENU” button to enter menu, select “DAB

settings” then “Service Following (SF)”. Use “ROTARY

COMMANDER” to select “On” or “Off” and press it to

confirm. Then press “RETURN” to exit menu.

2. When Service Following is on, the “SF” white icon will

appear at the top of the display. Repeat the same procedure to

turn OFF the service following function and the “SF” icon

will disappear from the LCD screen.

Note: Upon certain situations, you may want to turn off the SF

function to prevent the product from switching between equally

strong transmitters from different areas. In this instance, it is

recommended to turn off the SF function.

Traffic Announcements (TA) ON/OFF:

1. Press and hold the “MENU” button to enter menu setting,

select “DAB Settings” and “Traffic Announcement”, then

choose “On” or “Off”. SDA-11DAB default setting for Traffic

Announcements is ON.

2. When Traffic Announcement is set to “On”, a white icon

“TA” will appear at the top of the display. During traffic

announcement broadcasting, the white “TA” icon will turn red

and turn white when the TA broadcast is finished.

3. To cancel an active Traffic Announcement, simply press the

“RETURN” button, the SDA-11DAB will return to the DAB

station you were listening to.

Note: It is recommended to enable the traffic announcements

function if you want to receive important traffic information. When

TA is ON and while you are listening to music through Bluetooth

streaming from your phone or through Aux-In, the device will

automatically switch to traffic announcements when a TA signal is

detected.

Program Type (PTY):

1. The scanned and stored DAB stations will be grouped into 4

program types:

a. News/Info

b. Popular

c. Classics

d. Others

2. To select program type, press and hold “MENU” button to

enter menu, select “DAB Settings” and “Program Type”

3. Use “ROTARY COMMANDER” to scroll and select the

desired program type and a list of the selected type will be

displayed.

4. Press the “ROTARY COMMANDER” to select and press it

again to confirm. Then press “RETURN” button to exit.

Station Group:

1. To select station group, press and hold “MENU” button to

enter menu, select “DAB Settings” and “Station Group”. A

list of DAB ensemble will be displayed

2. Use “ROTARY COMMANDER” to scroll and select the desired

DAB ensemble and a list of DAB stations will be displayed.

3. Press the “ROTARY COMMANDER” to select and press it

again to confirm. Then press “RETURN” button to exit.

Ever Scroll:

1. Press and hold “MENU” to enter menu setting, use

“ROTARY COMMANDER” to select “DAB Settings” and

“Ever Scroll”

2. If “Ever Scroll” is set to “Off”, the DLS text information will

only scroll once. If it is set to “On”, the DLS text will be

scrolling continuously. SDA-11DAB default setting for Ever

Scroll is ON.

Manage Preset Stations

Store Preset Stations:

You can store your favourite DAB+ stations using the direct preset hard

key buttons (1-6) on the front of the device:

1. In DAB source, use the “ROTARY COMMANDER’ to

select a DAB+ station.

2. Press and hold preset button (1-3 buttons from left to right) to

store your favourite preset DAB+ stations. When the first

preset is stored, the short form DAB station name, e.g. “BBC

R3” will be shown above the preset button.

3. Repeat the same procedure to store your favourite preset.

Press the 4

button “>>” to store more favourite presets, via

the hard key preset buttons.

4. You can recall these favourite stations anytime by pressing

preset 1-6.

You may program and store more up to 30 preset stations by using

the following procedure:

La pagina sta caricando ...

Pioneer SDA-11DAB Manuale utente

Marca: Pioneer

Modello: SDA-11DAB

Categoria: Cellulari

Tipo: Manuale utente

Scarica il pdf

rapporto

in altre lingue

English: Pioneer SDA-11DAB User manual
română: Pioneer SDA-11DAB Manual de utilizare

Documenti correlati

Altri documenti

Ocean Digital DK-70 Istruzioni per l'uso