Yamaha RM-CR Manuale utente

Tipo
Manuale utente
SIGNAL PROCESSOR
PROCESSEUR DE SIGNAUX AUDIO
СИГНАЛЬНЫЙ ПРОЦЕССОР
信号处理器会议终端
RM-CR
Installationshandbuch
IT
PT
ES
FR
DE
Manuel d’installation
Manual de instalación
Manual de instalação
Manuale di installazione
Installation Manual
EN
RU Руководство по установке
ZH
KO
설치설명서
安装说明书
JA
EnglishDeutschFrançaisEspañolPortuguêsItalianoРусский
한국어
2RM-CR Installation Manual
1. IMPORTANT NOTICE:
DO NOT MODIFY THIS UNIT!
This product, when installed as indicated
in the instructions contained in this
manual, meets FCC requirements.
Modifications not expressly approved by
Yamaha may void your authority, granted
by the FCC, to use the product.
2. IMPORTANT: When connecting this
product to accessories and/or another
product use only high quality shielded
cables. Cable/s supplied with this product
MUST be used. Follow all installation
instructions. Failure to follow instructions
could void your FCC authorization to use
this product in the USA.
3. NOTE: This equipment has been tested
and found to comply with the limits for a
Class A digital device, pursuant to Part 15
of the FCC rules. These limits are
designed to provide reasonable protection
against harmful interference when the
equipment is operated in a commercial
environment. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instruction manual,
may cause harmful interference to radio
communications. Operation of this
equipment in a residential area is likely to
cause harmful interference in which case
the user will be required to correct the
interference at his own expense.
FCC INFORMATION (U.S.A.)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received including interference that may
cause undesired operation.
COMPLIANCE INFORMATION STATEMENT
(Supplierʼs declaration of conformity procedure)
Responsible Party: Yamaha Unified Communications, Inc.
Address: 144 North Rd, Suite 3250 Sudbury, MA 01776
Telephone: 800-326-1088
Type of Equipment: Signal Processor
Model Name: RM-CR
(class A)
(SDoc)
English
3
RM-CR Installation Manual
PRECAUTIONS.............................................................................................................4
NOTICE .........................................................................................................................6
INFORMATION..............................................................................................................7
INTRODUCTION ...........................................................................................................9
Included items..................................................................................................................................... 9
Separately sold items.......................................................................................................................... 9
Manual structure ................................................................................................................................. 9
CONTROLS AND CONNECTORS .............................................................................10
Front Panel.........................................................................................................................................10
Rear panel .........................................................................................................................................12
Side panel..........................................................................................................................................13
Bottom panel......................................................................................................................................14
INSTALLATION IN A RACK........................................................................................15
INSTALLATION ON A DESK ......................................................................................17
MAIN SPECIFICATIONS.............................................................................................19
Dimensional diagram ........................................................................................................................ 22
(bottom_en_01)
CONTENTS
The model number, serial number, power requirements, etc., may be found on or near the name
plate, which is at the bottom of the unit. You should note this serial number in the space provided
below and retain this manual as a permanent record of your purchase to aid identification in the event
of theft.
Model No.
Serial No.
4RM-CR Installation Manual
PLEASE READ CAREFULLY BEFORE PROCEEDING
Please keep this manual in a safe place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious
injury or even death from electrical shock, short-circuiting, damages, fire or other
hazards. These precautions include, but are not limited to, the following:
Fire warning
Do not place any burning items or open flames near the product, since they may cause a fire.
Hearing loss
Before turning the power of all devices on or off, make sure that all volume levels are set to the
minimum. Failing to do so may result in hearing loss, electric shock, or device damage.
When turning on the AC power in your audio system, always turn on the power amplifier LAST,
to avoid hearing loss and speaker damage. When turning the power off, the power amplifier
should be turned off FIRST for the same reason.
Wireless unit
Do not use this product near medical devices or inside medical facilities. Radio waves from
this product may affect electro-medical devices.
Do not use this product within 15 cm (6 in) of persons with a heart pacemaker implant or a
defibrillator implant. Radio waves from this product may affect electro-medical devices, such
as a heart pacemaker implant or defibrillator implant.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical
injury to you or others. These precautions include, but are not limited to, the
following:
If you notice any abnormality
If any of the following problems occur, immediately turn off the PoE injector or the PoE network
switch and disconnect the cable.
- The LAN cable damaged.
- Unusual smells or smoke are emitted.
- Some object, or water has been dropped into the product.
- There is a sudden loss of sound during use of the product.
- Cracks or other visible damage appear on the product.
Then have the product inspected or repaired by qualified Yamaha service personnel.
PRECAUTIONS
Yamaha cannot be held responsible for damage caused by improper use or modifications to the
product, or data that is lost or destroyed.
English
5
RM-CR Installation Manual
Location and connection
When connecting this product with a PoE injector or the PoE network switch, use a CAT5e or
higher LAN cable, which supports the maximum power supply voltage (57 V) of the IEEE
802.3at standard. If you connect a cable that does not comply with specifications, or connect
a flat type or slim type cable, fire or malfunctions might occur.
Do not damage the LAN cable. Failure to observe this precaution could result in fire, electric
shock, or damage to the product.
- Do not place heavy objects on the cable.
- Do not process the cable in any way.
- Do not use staples to fix the cable in place.
- Do not apply excessive force to the cable.
- Be sure to keep the cable away from anything hot.
Do not place the product in an unstable position or a location with excessive vibration, where
it might accidentally fall over and cause injury.
Keep this product out of reach of children. This product is not suitable for use in locations
where children are likely to be present.
Do not block the vents. This product has ventilation holes at the rear/sides to prevent the
internal temperature from becoming too high. In particular, do not place the product on its
side or upside down. Inadequate ventilation can result in overheating, possibly causing
damage to the product(s), or even fire.
When installing the product:
- Do not cover it with any cloth.
- Do not install it on a carpet or rug.
- Make sure the top surface faces up; do not install on its sides or upside down.
- Do not use the product in a confined, poorly-ventilated location.
Inadequate ventilation can result in overheating, possibly causing damage to the product(s),
or even fire.
If the product is mounted in an EIA standard rack, carefully read the section “Please read
before mounting the unit into a rack” on page 15. Inadequate ventilation can result in
overheating, possibly causing damage to the product(s), malfunction, or even fire.
Do not place the product in a location where it may come into contact with corrosive gases or
salt air. Doing so may result in malfunction.
Before moving the product, remove all connected cables.
Do not route cables where someone might trip over them, such as in a location where people
pass. Tripping on a cable may cause a person or this product to fall down, resulting in
personal injury or damage to the product.
Do not use the separately sold RM-MTL mounting accessory to attach the unit to a ceiling or
wall that is higher than 2 meters. If the unit falls, injury or damage might occur.
Always consult qualified Yamaha service personnel if the product installation requires
construction work. Improper installation might cause accidents, injuries, damage or
malfunction of this product.
Do not open
This product contains no user-serviceable parts. Do not attempt to disassemble the internal
parts or modify them in any way.
6RM-CR Installation Manual
Water warning
Do not expose the product to rain, use it near water or in damp or wet conditions, or place on
it any containers (such as vases, bottles or glasses) containing liquids which might spill into
any openings.
Never insert or remove a cable with wet hands.
Handling caution
Do not insert your fingers or hands in any gaps or openings on the product (vents, etc.).
Do not rest your weight on the product or place heavy objects on it.
Backup battery
Do not replace the backup battery by yourself. Doing so may cause an explosion and/or
damage to the product(s).
Handling and maintenance
Do not connect this product to public Wi-Fi and/or Internet directly. Only connect this product
to the Internet through a router with strong password-protections. Consult your router
manufacturer for information on security best practices.
Do not use the product in the vicinity of a TV, radio, or other electric products. Otherwise, the
product, TV, or radio may generate noise.
Do not expose the product to excessive dust or vibration, or extreme cold or heat, in order to
prevent the possibility of panel disfiguration, unstable operation, or damage to the internal
components.
Do not install in locations where temperature changes are severe. Otherwise, condensation
may form on the inside or the surface of the product, causing it to break.
If there is reason to believe that condensation might have occurred, leave the product for
several hours without turning on the power until the condensation has completely dried out, in
order to prevent possible damage.
Do not place vinyl, plastic or rubber objects on the product, since this might cause alteration
or discoloration of the panel.
When cleaning the product, use a dry and soft cloth. Do not use paint thinners, solvents,
cleaning fluids, or chemical-impregnated wiping cloths, since this might cause alteration or
discoloration.
The rubber feet included in this package can be attached to the product to prevent slippage
when it is to be used on a slippery surface.
NOTICE
English
7
RM-CR Installation Manual
About functions/data bundled with the product
This is a class A product. Operation of this product in a residential environment could cause
radio interference.
Refer to the website below for the licensing terms of the open source software used in this product.
U.S.A. and Canada
https://uc.yamaha.com/support/
Other Countries
https://download.yamaha.com/
This product uses Dante Broadway.
Refer to the Audinate website (English) for details on the open source licenses for the
particular software.
https://www.audinate.com/software-licensing
XLR-type connectors are wired as follows (IEC60268 standard):
pin 1: ground, pin 2: hot (+), and pin 3: cold (-).
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any
use of such marks by Yamaha Corporation is under license.
About this manual
This Installation Manual uses the following signal words for the important information:
The illustrations as shown in this manual are for instructional purposes only.
The company names and product names in this manual are the trademarks or registered
trademarks of their respective companies.
Software may be revised and updated without prior notice.
The contents of this manual apply to the latest specifications as of the publishing date. To
obtain the latest manual, access the Yamaha website then download the manual file.
INFORMATION
WARNING This content indicates “risk of serious injury or death.
CAUTION This content indicates “risk of injury.
NOTICE Indicates content that you must observe in order to prevent the
product from malfunctioning, being damaged, or operating
incorrectly, and to avoid data loss.
IMPORTANT Indicates content that you must know in order to operate and use the
product correctly.
NOTE Indicates information that is related to operation and use. Read this
for your reference.
8RM-CR Installation Manual
About disposal
This product contains recyclable components. When disposing of this product, please
contact the appropriate local authorities.
Information for users on collection and disposal of old equipment:
This symbol on the products, packaging, and/or accompanying documents means
that used electrical and electronic products should not be mixed with general
household waste.
For proper treatment, recovery and recycling of old products, please take them to
applicable collection points, in accordance with your national legislation.
By disposing of these products correctly, you will help to save valuable resources
and prevent any potential negative effects on human health and the environment
which could otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products, please contact
your local municipality, your waste disposal service or the point of sale where you
purchased the items.
For business users in the European Union:
If you wish to discard electrical and electronic equipment, please contact your
dealer or supplier for further information.
Information on Disposal in other Countries outside the European Union:
This symbol is only valid in the European Union. If you wish to discard these items,
please contact your local authorities or dealer and ask for the correct method of
disposal.
English
9
RM-CR Installation Manual
Thank you for purchasing the RM-CR signal processor. This product is a signal processor
that produces high-quality and pleasant audio for remote conferences held in medium-
sized meeting rooms of offices. Be sure to read this manual before using the
product.Please retain this manual in a safe location for future reference.
Included items
Installation manual (this document)
Access panel (with screw)
USB cable (A-B type, 5 meters, for voice communication)
USB cable (A-micro B type, 1 meter, for setup)
Rubber feet (4 pcs.)
Separately sold items
RM-MRK mounting accessory
This is required when installing the product in a 19-inch rack.
For details on attaching the RM-MRK, refer to “INSTALLATION IN A RACK” (page. 15).
RM-MTL mounting accessory
This is required when installing the product on the underside of a desk.
For details on attaching the RM-MTL, refer to “INSTALLATION ON A DESK” (page. 17).
Manual structure
Regarding this product, the following materials are available in addition to this installation
manual.
RM-CR reference manual
This explains connections between this device and external devices, and settings via the
web UI.
Related documents can be downloaded from the following website.
U.S.A. and Canada
https://uc.yamaha.com/support/
Other Countries
https://download.yamaha.com/
INTRODUCTION
10 RM-CR Installation Manual
Front Panel
The explanation here uses an illustration depicting the state in which the product is
shipped.
After you have made settings, use the screw to fasten the included access panel so that
the [RESET] button and the [SETUP] port are inaccessible.
For details on each indicator, refer to “RM-CR Reference Manual.”
1(Power) indicator
This is the power supply indicator. It is lit when power is being correctly supplied to the
rear panel [Dante/PoE] port.
2(Status) indicator
This indicates the status of the unit.
3(Bluetooth) button / indicator
Press to pair with a smartphone via Bluetooth.
By connecting to a smartphone, you can exchange audio with a remote location.
CONTROLS AND CONNECTORS
1 2 3 4
5 6
Access panel
Screw
English
11
RM-CR Installation Manual
4[MIC IN] 1/2 jacks
These are XLR jacks (balanced) for connecting dynamic mics. Do not connect
condenser mics here.
5[RESET] button
Use a fine-pointed object such as an eject pin to press this button.
Long-pressing this button for less than 4 seconds or for 12 seconds or more does not
reset anything.
6[SETUP] port
This port is for connection to a computer so that settings can be made via a web
browser. Use the included USB cable (A-micro B type) for this connection. For details
on settings, refer to “RM-CR Reference Manual.”
Long press Status indicator Reset target
4 seconds to less than 8
seconds Flashes twice per
second Network-related settings
8 seconds to less than
12 seconds Flashes three times
per second All settings
(automatically restarts after initialization)
12 RM-CR Installation Manual
Rear panel
1[AUX IN] L/R jacks
These are RCA jacks (unbalanced) for audio input. Use these jacks if the audio from the
remote location is analog.
2[AUX OUT] L/R jacks
These are RCA jacks (unbalanced) for audio output. Use these jacks if the audio to the
remote location is analog.
3Speaker jacks
These are RCA jacks (unbalanced) for audio output. Use these jacks if the powered
speaker or power amp used in the remote location does not support Dante.
4USB port
Use this port when connecting to a computer to exchange audio with a remote location.
Use the included USB cable (A-B type) for this connection.
5Network ports
These are RJ-45 ports to which you can connect LAN cables (CAT5e or higher) for
remote administration and settings via the company network, etc.
DHCP is specified by default. If you want to use a specific IP address, use the web UI
to specify the IP address before connecting to the company network. For details on
settings, refer to “RM-CR Reference Manual.”
You can also connect to a public network for exchanging audio with a remote location
via the SIP protocol.
Notice : The maximum usable cable length is 100 meters.
:To prevent electromagnetic interference, use STP (Shielded Twisted Pair)
cables.
46123 5 7
English
13
RM-CR Installation Manual
6[Dante/PoE] port
This is an RJ-45 port to which you can connect an LAN cable (CAT5e or higher) via an
IEEE802.3at compliant a PoE injector or the PoE network switch to a Dante unit such as
the RM-CG.
Notice : Do not connect any device here other than a Dante-compatible device or a
device (including a computer) that supports gigabit Ethernet.
:The maximum usable cable length is 100 meters.
:To prevent electromagnetic interference, use an STP (Shielded Twisted Pair)
cable.
7Exhaust vent
This product is equipped with a cooling fan. Hot air is exhausted from this vent, so take
care that the vent is not blocked by any obstruction.
Side panel
This explanation uses an illustration of the left side as seen from the front.
1Intake vent
Cooling air is taken in through this vent, so take care that the vent is not blocked by any
obstruction. You should also clean this vent periodically. If dust accumulates on this
vent, the temperature inside the unit might rise, causing the unit does not operate
normally.
2Mounting accessory attachment holes
Use these when attaching the RM-MRK or RM-MTL mounting accessory.
For details on attaching the RM-MRK, refer to “INSTALLATION IN A RACK” (page. 15).
For details on attaching the RM-MTL, refer to “INSTALLATION ON A DESK” (page. 17).
1 2
14 RM-CR Installation Manual
Bottom panel
1Rubber foot attachment guides
These are the locations at which to attach the included rubber feet. Attach the included
rubber feet as shown in the illustration.
2Product label
This shows the model name, serial number, and MAC address of this unit.
1
2
1
Rubber feet
Rubber feet attachment guide
English
15
RM-CR Installation Manual
Use the separately sold RM-MRK mounting accessory to install the unit.
Please read before mounting the unit into a rack
This product is warranted to operate in a temperature range of 0–40°C. If this product is
mounted in a rack together with other devices, there might be cases in which heat from the
various devices causes the temperature inside the rack to rise, so that the product is
unable to perform satisfactorily. To prevent the temperature inside the unit from rising,
mount the unit in the rack in accordance with the requirements below.
If this product is mounted together with devices that are prone to produce heat, such as
power amps, leave at least 1U of space between it and other devices. Also, be sure to
maintain sufficient ventilation in this space by installing a ventilation panel or leaving it
open.
Leave the rear panel of the rack open, and ensure that the rack is at least 10 cm away
from the wall or ceiling to allow sufficient air circulation. If you cannot open the rear panel
of the rack, install a commercially-available forced ventilation device, such as a fan kit. If
you install a fan kit, closing the rear panel may work better for heat dissipation purposes.
For more information, refer to the owner’s manual for the rack and/or fan kit.
INSTALLATION IN A RACK
Caution: If you plan to relocate the rack, be sure to first remove this unit
from the rack.
If this product is moved while mounted in a rack, vibration etc. might cause
the mounting accessory to deform or break, possibly causing injury. There is
also a possibility that this unit might malfunction.
16 RM-CR Installation Manual
[Installation]
The example shown here is for when the long metal fixture is attached to the left side as
seen from the front. The procedure can also be used when attaching the long metal fixture
to the opposite side.
Notice: If the included rubber feet have already been attached to the unit, remove them.
1. When attaching each metal fixture, place the spacer sheet included between this
unit and the metal fixture.
Using the attachment screws (4 pcs.) included with the mounting accessory, fasten a
metal fixture to each side of this unit.
2. Attach the metal fixtures to the 19-inch rack.
Attach the metal fixtures to the 19-inch rack using the four included attachment screws
of rack. Be sure to tighten the screws so that they will not get loosened.
Warning: Use only the specified screws included with the mounting
accessory.
If the unit falls, injury or damage might occur. This could also cause electric
shock or malfunctions.
Screws
Screws
Spacer sheet
Mounting accessory
Spacer sheet
19-inch rack
Screws
Screws
English
17
RM-CR Installation Manual
Use the separately sold RM-MTL mounting accessory to install the unit.
Obtain four screws with a diameter of approximately 5 mm (M5 equivalent) that are
appropriate for the material and thickness of the desktop.
Carry out the installation through step 4.
1. Using four commercially available screws approximately 5 mm in diameter, fasten
the metal fixture to the underside of the desktop.
In the illustration above, the upper part is toward the front.
INSTALLATION ON A DESK
Warning: Do not attach this product to anything other than the underside of a
desktop.
If the unit falls, injury or damage might occur.
Caution: Installation must be performed by a qualified installer. During
installation, pay attention to the following points.
Choose hardware and a location that is well able to support the weight of this unit
Avoid locations that are subject to sustained vibration
You must use the specified installation accessory
Perform periodic maintenance checks
Warning: You must use screws that are appropriate for the material of the
desktop.
If the unit falls, injury or damage might occur.
18 RM-CR Installation Manual
2. Provisionally install the two included screws into the front holes of the mounting
accessory attachment holes of this product.
When doing so, leave a gap of approximately 2 mm between the side of the unit and
the head of the screw, so that the screws can engage the metal fixture.
3. Slide the unit so that the screws you provisionally installed in step 2 engage the
slots of the metal fixture attached under the desk.
4. Tighten the four screws in the attachment holes of the mounting accessory.
Screws
Metal fixture
Screws
English
19
RM-CR Installation Manual
General specifications
MAIN SPECIFICATIONS
Dimensions W215 mm × D264 mm × H44 mm
Weight 1.6 kg
Power supply PoE+ (IEEE802.3at, LLDP), DC 48 V
Maximum power
consumption 15.0 W
Temperature Operating 0 °C – 40 °C
Storage −20 °C – 60 °C
Humidity Operating 30% – 90% (non-condensing)
Storage 20% – 90% (non-condensing)
Indicators
• Power
• Status
•Bluetooth
Network Port Indicator (×3)
Included items
Installation manual (this document), access panel (with screw),
USB cable (A-B type), USB cable (A-micro B type),
rubber feet (4 pcs.)
Separately sold items Mounting accessory: RM-MTL
Mounting accessory: RM-MRK
20 RM-CR Installation Manual
Audio specifications
Frequency response 20 Hz – 20 kHz
Sampling rate 48 kHz
Bit depth 24-bit
Latency 8 [ms] (Dante In to USB Out, including signal
processing)
Audio interface
Dante 16 in × 16 out
USB USB2.0 type-B, Audio Class 1.0
Input: 2ch, Output: 2ch @48 kHz
Mic Input XLR balanced, Input 2ch
AUX RCA unbalanced (Line Level),
Input: 2ch, Output: 2ch
Speaker Out RCA unbalanced (Line Level),
Output: 2ch
Bluetooth
Version 4.2
Supported protocols: HFP (1.6), A2DP, AVRCP (1.6)
Supported codecs: CVSD, SBC, mSBC
Wireless output: Class 2
Maximum communication distance:
10 meters (no obstructions)
Wireless frequencies (operating frequencies):
2,402 – 2,480 MHz
Maximum output power (EIRP): 4.0 dBm (2.5 mW)
SIP
Call Handling
Dial, Answer, Hold, Resume, Forwarding,
Do not disturb, Call ID, Voice Mail Notifications
(switch configured)
Call Bridging
Supports Bridging SIP, USB, BT and AUX Calls.
Join, Split, Hold, Resume, 5+1 Lines: Up to 2 SIP
calls, 1 USB call, 1 Bluetooth call, 1 AUX, plus the
user
Codecs G.711, G.722HD, G.729ab, G.726
DTMF Support RTP event, SIP in-band, SIP info package
Security SRTP Support (RFC 1889), IETF SIP support (RFC
3261 and companion RFCs)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208

Yamaha RM-CR Manuale utente

Tipo
Manuale utente