Yamaha SWR2310 Manuale del proprietario

Marca: Yamaha

Modello: SWR2310

Categoria: Networking

Tipo: Manuale del proprietario

L2 SWITCH

Owner’s Manual

Bedienungsanleitung

Mode d’emploi

Manual de instrucciones

Manual de instruções

Manuale di istruzioni

Руководство пользователя

칺푷컲졓컪

SWR2310-28GT

SWR2310-18GT

SWR2310-10G

EnglishDeutschFrançaisEspañolPortuguêsItalianoItaliano묻펂 Русский

2 SWR2310-28GT SWR2310-18GT SWR2310-10G

Explanation of Graphical Symbols

Explication des symboles

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated

“dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

L’éclair avec une flèche à l’intérieur d’un triangle équilatéral est destiné à attirer l’attention de l’utilisateur sur la présence d’une

« tension dangereuse» non isolée à l’intérieur de l’appareil, pouvant être suffisamment élevée pour constituer un risque d’électrocution.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the product.

Le point d’exclamation à l’intérieur d’un triangle équilatéral est destiné à attirer l’attention de l’utilisateur sur la présence d’instructions

importantes sur l’emploi ou la maintenance (réparation) de l’appareil dans la documentation fournie.

IMPORTANT SAFETY

INSTRUCTIONS

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in accordance with

the manufacturer’s instructions.

8 Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers) that

produce heat.

9 Do not defeat the safety purpose of the polarized or grounding-

type plug. A polarized plug has two blades with one wider than the

other. A grounding type plug has two blades and a third grounding

prong. The wide blade or the third prong are provided for your

safety. If the provided plug does not fit into your outlet, consult an

electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point where

they exit from the apparatus.

11 Only use attachments/accessories specified by the manufacturer.

12 Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with

the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to

avoid injury from tip-over.

13 Unplug this apparatus during lightning storms or

when unused for long periods of time.

14 Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way, such

as power-supply cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally, or has

been dropped.

PRÉCAUTIONS CONCER-

NANT LA SÉCURITÉ

1 Lire ces instructions.

2 Conserver ces instructions.

3 Tenir compte de tous les avertissements.

4 Suivre toutes les instructions.

5 Ne pas utiliser ce produit à proximité d’eau.

6 Nettoyer uniquement avec un chiffon propre et sec.

7 Ne pas bloquer les orifices de ventilation. Installer l’appareil

conformément aux instructions du fabricant.

8 Ne pas installer l’appareil à proximité d’une source de chaleur

comme un radiateur, une bouche de chaleur, un poêle ou tout autre

appareil (y compris un amplificateur) produisant de la chaleur.

9 Ne pas modifier le système de sécurité de la fiche polarisée ou de

la fiche de terre. Une fiche polarisée dispose de deux broches dont

une est plus large que l’autre. Une fiche de terre dispose de deux

broches et d’une troisième pour le raccordement à la terre. Cette

broche plus large ou cette troisième broche est destinée à assurer

la sécurité de l’utilisateur. Si la fiche équipant l’appareil n’est pas

compatible avec les prises de courant disponibles, faire remplacer

les prises par un électricien.

10 Acheminer les cordons d’alimentation de sorte qu’ils ne soient pas

piétinés ni coincés, en faisant tout spécialement attention aux

fiches, prises de courant et au point de sortie de l’appareil.

11 Utiliser exclusivement les fixations et accessoires spécifiés par le

fabricant.

12 Utiliser exclusivement le chariot, le stand, le

trépied, le support ou la table recommandés par

le fabricant ou vendus avec cet appareil. Si

l’appareil est posé sur un chariot, déplacer le

chariot avec précaution pour éviter tout risque

de chute et de blessure.

13 Débrancher l’appareil en cas d’orage ou lorsqu’il

doit rester hors service pendant une période prolongée.

14 Confier toute réparation à un personnel qualifié. Faire réparer

l’appareil s’il a subi tout dommage, par exemple si la fiche ou le

cordon d’alimentation est endommagé, si du liquide a coulé ou des

objets sont tombés à l’intérieur de l’appareil, si l’appareil a été

exposé à la pluie ou à de l’humidité, si l’appareil ne fonctionne pas

normalement ou est tombé.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

ATTENTION :

POUR RÉDUIRE LES RISQUES D'ÉLECTROCUTION, NE PAS RETIRER

LE CAPOT (OU LE DOS). NE CONTIENT PAS DE PIÈCES NÉCESSITANT

L'INTERVENTION DE L'UTILISATEUR. POUR TOUTE INTERVENTION,

FAIRE APPEL À DES PROFESSIONNELS QUALIFIÉS.

ATTENTION

RISQUE DE CHOC

ELECTRIQUE-NE PAS OUVRIR

The above warning is located on the top of the unit. L’avertissement ci-dessus est situé sur le dessus de l’unité.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

AVERTISSEMENT

POUR RÉDUIRE LES RISQUES D’INCENDIE OU DE DÉCHARGE

ÉLECTRIQUE, N’EXPOSEZ PAS CET APPAREIL À LA PLUIE OU À

L’HUMIDITÉ.

English

SWR2310-28GT SWR2310-18GT SWR2310-10G 3

1. IMPORTANT NOTICE:

DO NOT MODIFY THIS UNIT!

This product, when installed as indicated

in the instructions contained in this

manual, meets FCC requirements.

Modifications not expressly approved by

Yamaha may void your authority, granted

by the FCC, to use the product.

2. IMPORTANT: When connecting this

product to accessories and/ or another

product use only high quality shielded

cables. Cable/s supplied with this product

MUST be used. Follow all installation

instructions. Failure to follow instructions

could void your FCC authorization to use

this product in the USA.

3. NOTE: This equipment has been tested

and found to comply with the limits for a

Class A digital device, pursuant to Part 15

of the FCC rules. These limits are

designed to provide reasonable protection

against harmful interference when the

equipment is operated in a commercial

environment. This equipment generates,

uses and can radiate radio frequency

energy and, if not installed and used in

accordance with the instruction manual,

may cause harmful interference to radio

communications. Operation of this

equipment in a residential area is likely to

cause harmful interference in which case

the user will be required to correct the

interference at his own expense.

FCC INFORMATION (U.S.A.)

Responsible Party: Yamaha Corporation of America

Address: 6600 Orangethorpe Ave. Buena Park CA90620

Telephone: 714-522-9011

Type of Equipment: L2 SWITCH

Model Name: SWR2310-28GT, SWR2310-18GT, SWR2310-10G

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received including interference that may cause

undesired operation.

See user manual instructions if interference to radio reception is suspected.

COMPLIANCE INFORMATION STATEMENT

(Supplierʼs declaration of conformity procedure)

(class A)

(FCC SDoC)

4 SWR2310-28GT SWR2310-18GT SWR2310-10G

PRECAUTIONS

PLEASE READ CAREFULLY

BEFORE PROCEEDING

Please keep this manual in a safe

place for future reference.

This product is an intelligent L2 switch with

optimal functionality for Dante.

Do not use for any purposes other than the one

intended. Those who are unfamiliar with

handling or those who can not handle according

to this manual such as children, should be

supervised by responsible persons to ensure

safety.

WARNING

Always follow the basic precautions

listed below to avoid the possibility of

serious injury or even death from

electrical shock, short-circuiting,

damages, fire or other hazards. These

precautions include, but are not limited

to, the following:

If you notice any abnormality

• If any of the following problems occur,

immediately turn off the power switch and

disconnect the electric plug from the

outlet.

- The power cord or plug becomes frayed

or damaged.

- Unusual smells or smoke are emitted.

- Some object, or water has been

dropped into the product.

- There is a sudden loss of sound during

use of the product.

- Cracks or other visible damage appear

on the product.

Then have the product inspected or

repaired by qualified Yamaha service

personnel.

Power supply/power cord

• Do not place the power cord near heat

sources such as heaters or radiators, and

do not excessively bend or otherwise

damage the cord, place heavy objects on

it, or place it in a position where anyone

could walk on, trip over, or roll anything

over it.

• Only use the voltage specified as correct

for the product. The required voltage is

printed on the name plate of the product.

• Use only the supplied power cord/plug.

If you intend to use the product in an area

other than in the one you purchased, the

included power cord may not be

compatible. Please check with your

Yamaha dealer.

• Check the electric plug periodically and

remove any dirt or dust which may have

accumulated on it.

• Make sure to fully insert the electric plug

to prevent electric shocks or fire.

• When setting up the product, make sure

that the AC outlet you are using is easily

accessible.

If some trouble or malfunction occurs,

immediately disconnect the plug from the

outlet. As long as the power cord is not

unplugged from the wall AC outlet, the

product will not be disconnected from the

power source.

• Remove the electric plug from the outlet

when the product is not to be used for

extended periods of time.

• Do not touch the product or the electric

plug during an electrical storm.

• Be sure to connect to an appropriate

outlet with a protective grounding

connection. Improper grounding can

result in electrical shock, fire, or damage.

PA11- 1/4

English

SWR2310-28GT SWR2310-18GT SWR2310-10G 5

Do not open

• This product contains no user-serviceable

parts. Do not attempt to disassemble the

internal parts or modify them in any way.

Water warning/Fire warning

• Do not expose the product to rain, use it

near water or in damp or wet conditions,

or place on it any containers (such as

vases, bottles or glasses) containing

liquids which might spill into any

openings.

• Never insert or remove an electric plug

with wet hands.

• Do not place any burning items or open

flames near the product, since they may

cause a fire.

CAUTION

Always follow the basic precautions

listed below to avoid the possibility of

physical injury to you or others. These

precautions include, but are not limited

to, the following:

Power supply/power cord

• When removing the electric plug from the

product or an outlet, always hold the plug

itself and not the cord. Pulling by the cord

can damage it.

Location and connection

• Do not place the product in an unstable

position or a location with excessive

vibration, where it might accidentally fall

over and cause injury.

• Keep the device and small parts out of

reach of children, to keep them from

putting their fingers into openings on the

product and accidentally being injured.

This product is not suitable for use in

locations where children are likely to be

present.

•

Do not block the vents. This product has

ventilation holes at the top (SWR2310-10G

only)/sides to prevent the internal

temperature from becoming too high. In

particular, do not place the product on its

side or upside down. Inadequate ventilation

can result in overheating, possibly causing

damage to the product(s), or even fire.

• When installing the product:

- Do not cover it with any cloth.

- Do not install it on a carpet or rug.

- Make sure the top or side surface faces

up; do not install on its front, rear, or

upside down.

- Do not use the product in a confined,

poorly-ventilated location.

Inadequate ventilation can result in

overheating, possibly causing damage to

the product(s), or even fire.

• When using the separately sold WK-SWR

wall mount accessory, do not install the

SWR2310-18GT, SWR2310-10G on a wall

or ceiling that is more than 2 meters high.

The product might fall, causing

malfunction or injury.

• If the product is mounted in an EIA

standard rack, carefully read the section

“Please read before mounting the unit into

a rack” on page 20. Inadequate

ventilation can result in overheating,

possibly causing damage to the

product(s), malfunction, or even fire.

• Do not place the product in a location

where it may come into contact with

corrosive gases or salt air. Doing so may

result in malfunction.

• Before moving the product, remove all

connected cables.

• Always consult qualified Yamaha service

personnel if the product installation

requires construction work, and make

sure to observe the following precautions.

- Choose mounting hardware and an

installation location that can support the

weight of the product.

- Avoid locations that are exposed to

constant vibration.

- Use the required tools to install the

product.

- Inspect the product periodically.

PA11- 2/4

6 SWR2310-28GT SWR2310-18GT SWR2310-10G

Maintenance

• Remove the power plug from the AC

outlet when cleaning the product.

Handling caution

• Do not insert your fingers or hands in any

gaps or openings on the product (vents,

ports, panel, etc.).

• Do not rest your weight on the product or

place heavy objects on it.

•

Do not look into the optical emitter when a

separately sold SFP module

(SFP-SWRG-SX, SFP-SWRG-LX) and/or

SFP+ module (SFP-SWRT-SR,

SFP-SWRT-LR) is installed. The separately

sold SFP/SFP+ modules are class 1 laser

devices. They may emit laser beams

invisible to the eye. If the laser beam

enters your eye, your eyesight might be

damaged.

Backup battery

• Do not replace the backup battery by

yourself. Doing so may cause an

explosion and/or damage to the

product(s).

When the backup battery needs to be

replaced, contact your Yamaha dealer

and have qualified Yamaha service

personnel replace the backup battery.

Yamaha cannot be held responsible for

damage caused by improper use or

modifications to the product, or data

that is lost or destroyed.

PA11- 3/4

English

SWR2310-28GT SWR2310-18GT SWR2310-10G 7

NOTICE

To avoid the possibility of malfunction/ damage

to the product, damage to data, or damage to

other property, follow the notices below.

Handling and maintenance

• Do not touch the interior of a port with your

fingers or any metallic object. Doing so

might cause malfunctions.

• Do not use the product in a location

exposed to direct sunlight (such as in a car

during the day), in a location of extreme

heat such as near a stove, in a location of

extreme cold, or in a location of excessive

dust or vibration. Failure to observe this

precaution could cause the product’s

panel to deform, its interior components to

malfunction, or its operation to become

unstable.

• Do not place vinyl, plastic or rubber

objects on the product, since this might

cause alteration or discoloration of the

panel.

• When cleaning the product, use a dry and

soft cloth. Do not use paint thinners,

solvents, cleaning fluids, or chemical-

impregnated wiping cloths, since this might

cause alteration or discoloration.

• Condensation can occur in the product due

to rapid, drastic changes in ambient

temperature—when the product is moved

from one location to another, or air

conditioning is turned on or off, for example.

Using the product while condensation is

present can cause damage. If there is

reason to believe that condensation might

have occurred, leave the product for several

hours without turning on the power until the

condensation has completely dried out.

• Drain all static electricity from your

clothing and body before handling this

product. Static electricity can damage this

product. Touch an exposed metal part of

the host device or other grounded object

beforehand.

• Do not install the product in a location

where magnetic fields are strong.

Otherwise, it might cause the product to

malfunction.

• Do not connect any noise generating

devices on the same power line as the

product. Failure to observe this precaution

could result in a malfunction or damage to

the product.

• Do not locate any connected LAN cables

close to the power cord. Otherwise, high

voltage might be induced, resulting in

malfunction.

• A 1000BASE-T connection will require an

Enhanced Category 5 (CAT5e) or better

LAN cable.

• Do not install any SFP module other than

the separately sold SFP-SWRG-SX or

SFP-SWRG-LX in an SFP port. Operation

cannot be guaranteed if any SFP module

other than the above is installed.

• Do not install any SFP+ module other than

the separately sold SFP-SWRT-SR or

SFP-SWRT-LR, any SFP module other

than the SFP-SWRG-LX or

SFP-SWRG-SX, or any direct attach cable

other than the DAC-SWRT-3M or

DAC-SWRT-1M in an SFP+ port.

Operation cannot be guaranteed if any

module or cable other than the above is

installed.

• Attach the dust cover to SFP/SFP+ ports

that are not in use. Failing to do so could

allow foreign objects to enter, causing

malfunctions. Keep the dust cover in a

safe place so that it is not lost.

• The rubber feet included in this package

can be attached to the product to prevent

slippage when it is to be used on a

slippery surface.

• Do not connect this product to public Wi-Fi

and/or Internet directly. Only connect this

product to the Internet through a router

with strong password-protections. Consult

your router manufacturer for information

on security best practices.

8 SWR2310-28GT SWR2310-18GT SWR2310-10G

Saving data

• This unit has a built-in backup battery that

maintains time information for the data.

When the backup battery runs down, the

time information will be initialized, causing

incorrect time information to be recorded in

the log. If this occurs, contact your dealer

or a Yamaha customer service center to

have the backup battery replaced. The life

span of the backup battery is

approximately 10 years, but this may vary

depending on the conditions of use. Set

the clock after replacing the battery.

Functions/data bundled with the

product

• This is a class A product. Operation of this

product in a residential environment could

cause radio interference.

About disposal

• This product contains recyclable

components. When disposing of this

product, please contact the appropriate

local authorities.

About this manual

• The illustrations and screens as shown in

this manual are for instructional purposes

only.

• Windows is a registered trademark of

Microsoft

Corporation in the United

States and other countries.

• The company names and product names

in this manual are the trademarks or

registered trademarks of their respective

companies.

• Software may be revised and updated

without prior notice.

Open source software used in this

product

• Please refer to the Yamaha Pro Audio

website for the licensing terms.

http://www.yamaha.com/proaudio/

Warning: Fiber Optic Port Safety

This product is intended to be installed in an UL

certified Optical Transceiver Module, rated 3.3V,

Laser Class 1, if need further assistance,

please contact Yamaha Corporation for further

information.

° Icons

Information that applies to the SWR2310-28GT, SWR2310-18GT, or SWR2310-10G is

indicated by the following icons.

Indicates information that applies only to the SWR2310-28GT.

Indicates information that applies only to the SWR2310-18GT.

Indicates information that applies only to the SWR2310-10GT.

Memo

An icon is not shown for information that is common to all models.

Conventions in this document

Company names and product names in this document are abbreviated as follows.

• Yamaha SWR2310-28GT, SWR2310-18GT, or SWR2310-10G L2 switch: this product

• 10BASE-T/100BASE-TX/1000BASE-T cable: LAN cable

• SFP-SWRT-SR or SFP-SWRT-LR: SFP+ module

• SFP-SWRG-SX or SFP-SWRG-LX: SFP module

• DAC-SWRT-3M or DAC-SWRT-1M: direct attach cable

SWR2310-28GT

SWR2310-18GT

SWR2310-10G

English

SWR2310-28GT SWR2310-18GT SWR2310-10G 9

Contents

PRECAUTIONS ......................................................................................................... 4

NOTICE ..................................................................................................................... 7

Introduction.............................................................................................................10

Included items..........................................................................................................10

Features...................................................................................................................10

Separately sold items ..............................................................................................11

Related software and documents ............................................................................11

Controls and Connectors.......................................................................................12

Front Panel ..............................................................................................................12

Bottom panel / rear panel / side panel / top panel ...................................................14

Port indicators..........................................................................................................19

Attaching the legs.................................................................................................. 20

Installation in a rack............................................................................................... 20

Installation on a wall or ceiling............................................................................. 24

Settings................................................................................................................... 27

Make settings using the Web GUI .......................................................................... 27

Making settings from the command line using the CONSOLE port........................ 28

Connections ........................................................................................................... 30

Initialization ............................................................................................................ 34

Appendix................................................................................................................. 36

Hardware specifications.......................................................................................... 36

Dimensional diagram.............................................................................................. 38

RJ-45/DB-9 console cable pin configuration........................................................... 39

Software license agreement ................................................................................... 40

Index........................................................................................................................ 42

Introduction

10 SWR2310-28GT SWR2310-18GT SWR2310-10G

Introduction

Thank you for purchasing the Yamaha SWR2310-28GT, SWR2310-18GT, or SWR2310-10G

intelligent L2 switch.

This product is an intelligent L2 switch with optimal functionality for Dante. This owner’s

manual is intended for installers and facility designers, and explains installation methods and

settings. Please be sure to read this manual before you start using the product to take full

advantage of its features. Please retain this manual in a safe location for future reference.

Verify that the following included items are present.

• Owner’s manual (this document)

•Power cord

• Power cord clamp (used only for the included dedicated power cord)

• Legs (rubber feet) (4 pcs.)

• 19-inch rack mount hardware and screws (hardware: 2 pcs., screws: 8 pcs.)

These are required when installing this product in a 19-inch rack (1U size). For details on

installation, refer to “Installing in a 19-inch rack” / (page 23)

in “Installation.”

• This product makes it easy to specify the recommended settings for stable operation of a

Dante network (such as QoS, EEE, and IGMP Snooping).

• Multiple switches connected as a stack can be operated as a single virtual switch. The

SWR2310-28GT is equipped with stack functionality.

• This product can ease your daily network maintenance and operation responsibilities.

You can use Yamaha LAN Monitor (application) to ascertain the network structure that is

connected to this product and to monitor and manage the devices.

This product also supports performance management and damage management. All models

regularly monitor the memory and CPU usage and the bandwidth usage of each port. The

monitored data can be viewed in the Web GUI or backed-up to an SD card (sold separately).

The live/dead status of a network-connected terminal connected below this product can also

be monitored using only this product.

• This product can operate in cooperation with an authentication server to authenticate

terminals within the network.

This allows invalid terminals to be eliminated from the network.

Included items

Features

SWR2310-28GT

SWR2310-18GT

SWR2310-28GT

SWR2310-18GT

English

Introduction

SWR2310-28GT SWR2310-18GT SWR2310-10G

• RK-SWR rack mount accessory:

This is required when installing the SWR2310-10G in a 19-inch rack.

• WK-SWR wall mount accessory:

This is required when installing the SWR2310-10G or SWR2310-18GT on a wall or ceiling

2 m or less in height.

• SFP-SWRG-SX or SFP-SWRG-LX SPF module:

This is required when transmitting via 1000BASE-SX or 1000BASE-LX.

• SFP-SWRT-SR or SFP-SWRT-LR SFP+ module:

This is required when transmitting via 10GBASE-SR or 10GBASE-LR.

• DAC-SWRT-3M or DAC-SWRT-1M direct attach cable:

These are direct attach cables that provide SFP+ modules and copper cable in a single

unit. By directly connecting between SFP+ ports, these allow a 10 gigabit Ethernet system

to be constructed inexpensively, although with limited distance.

• Yamaha LAN Monitor/Yamaha LAN Monitor user guide

This is a PC application used to monitor this unit’s information and the entire network

including all Dante devices on the Dante network, and the user guide for this application.

• Yamaha network device USB serial driver / Yamaha network device USB serial driver

installation guide

This is a Windows driver that allows communication when the mini-USB CONSOLE port is

connected via a USB cable to a computer, and the installation guide for this driver.

• Command reference

This explains the commands used when using the command line to make settings from a

computer.

• Technical reference

This describes details of this product’s functions.

This software and these documents can be downloaded from the following website.

http://www.yamahaproaudio.com/

Separately sold items

Related software and documents

Controls and Connectors

12 SWR2310-28GT SWR2310-18GT SWR2310-10G

Controls and Connectors

1 POWER indicator

Lights when power is provided to the unit.

Caution

When an abnormal temperature is detected inside this product, the POWER indicator is

lit orange. Reconsider the environment in which this unit is installed, and correctly install

this unit so that its internal temperature is appropriate. You can also check this from

Yamaha LAN Monitor or the Web GUI.

Front Panel

POWER indicator Status

Unlit Power off

Flashing (green) Power on, starting up

Lit (green) Power on, normal

Lit (orange) Power on, error occurred

SWR2310-28GT

2 4 6 8 10 12 14 16

1 3 5 7 9 11 13 15

1 23 45 6 7 8

2 4 6 8 10 12 14 16

1357 9111315

1 23 45 6 7

SWR2310-18GT

SWR2310-10G

2468

1357

1 23 45 6 9

English

Controls and Connectors

SWR2310-28GT SWR2310-18GT SWR2310-10G

mini-USB CONSOLE port

This is a mini-USB port for making settings. Use a USB cable to connect it to the USB port

of a computer. Use a USB cable equipped with a USB Type A connector and a USB mini-

B (5-pin) connector.

Memo

Use a cable that supports data transfer. Charge-only cables cannot be used.

3 RJ-45 CONSOLE port

This is an RJ-45 port for making settings. Use an RJ-45/DB-9 console cable to connect it

to the RS-232C connector (COM port) of the computer.

4 microSD indicator

Indicates the connection and usage status of the microSD card.

Caution

Do not remove the microSD card if this indicator is flashing green.

5 microSD slot

A microSD card can be inserted in this slot.

6 LAN ports

These ports support T10BASE-T, 100BASE-TX, and 1000BASE-T.

7 SFP+ ports /

These ports support T10GBASE-SR, 10GBASE-LR, 1000BASE-SX, and 1000BASE-LX.

Install an SFP+ module or SFP module sold separately by Yamaha. For the SWR2310-

28GT or SWR2310-18GT, install a direct attach cable (DAC-SWRT-3M or DAC-SWRT-1M).

For details on installing an SFP+ or SFP module, refer to “Installing an SFP module”

(page 30) in “Connections.” For details on installing a direct attach cable, refer to “Installing

a direct attach cable” / (page 32). These ports can also

be used for stack connection. For details on stack connection, refer to "Making stack

connections” (page 33).

8 Stack ID indicator

This is a 7-segment display that indicates the stack ID when stack connection is used.

9 SFP ports

These ports support 1000BASE-SX and 1000BASE-LX. Install an SFP module sold

separately by Yamaha.

For details on installing an SFP module, refer to “Installing an SFP module” (page 30) in

“Connections.”

microSD indicator Status

Unlit A microSD card is not inserted in the slot.

Flashing green The microSD card is being accessed.

Lit green A microSD card is inserted.

SWR2310-28GT

SWR2310-18GT

SWR2310-28GT

SWR2310-18GT

SWR2310-28GT

SWR2310-10G

Controls and Connectors

14 SWR2310-28GT SWR2310-18GT SWR2310-10G

° Bottom panel

Bottom panel / rear panel / side panel / top panel

SWR2310-28GT

SWR2310-18GT

0 B

English

Controls and Connectors

SWR2310-28GT SWR2310-18GT SWR2310-10G

Leg attachment guides

These indicate the locations at which the included legs are to be attached when the unit is

installed in a level location. For details on installation, refer to “Attaching the legs”

(page 20) in “Installation.”

A Rack mount accessory attachment holes

Use these holes to attach the RK-SWR rack mount accessory. For details on installation,

refer to “Installing in a 19-inch rack” (page 21) in “Installation.”

B Wall mount accessory attachment holes /

Use these holes to attach the WK-SWR wall mount accessory.

For details on installation, refer to “Installation on a wall or ceiling” /

(page 24).

Notice

Magnet sheets are not supported, and should not be used.

SWR2310-10G

0 A

SWR2310-10G

SWR2310-18GT

SWR2310-10G

SWR2310-18GT

SWR2310-10G

Controls and Connectors

16 SWR2310-28GT SWR2310-18GT SWR2310-10G

° Rear panel

C Power cord clamp attachment holes

The included power cord clamp (C-shaped) can be attached here. For details on

installation, refer to “Turning the power on” (page 33) in “Connections.”

D Power supply inlet (three-pin connector, C14 type)

Insert the included power supply cord here.

SWR2310-28GT

Serial number

SWR2310-18GT

Serial number

SWR2310-10G

Serial number

English

Controls and Connectors

SWR2310-28GT SWR2310-18GT SWR2310-10G

° Side panel

° Top panel

SWR2310-28GT

E G

SWR2310-18GT

E G

SWR2310-10G

SWR2310-28GT

Serial number

MAC address

Controls and Connectors

18 SWR2310-28GT SWR2310-18GT SWR2310-10G

E Rack mount accessory attachment holes /

These are used when installing this product in a 19-inch rack (1U). For details on

installation, refer to “Installing in a 19-inch rack” /

(page 23) in “Installation.”

F Product label

This lists the model name, serial number, and MAC address etc. of this unit.

G Cooling vents

The holes in this product are cooling vents for intake of external air.

Warning

Do not block the cooling vents or place objects near them.

Doing so could cause fire or malfunctions.

SWR2310-18GT

Serial number

MAC address

SWR2310-10G

Serial number

MAC address

SWR2310-28GT

SWR2310-18GT

SWR2310-28GT

SWR2310-18GT

English

Controls and Connectors

SWR2310-28GT SWR2310-18GT SWR2310-10G

These are indicators for the LAN ports and SFP/SFP+ ports, and indicate the state of each

port in each mode.

The indicators show the link status and connection speed of the LAN port or SFP/SFP+

port.

LAN ports

SFP/SFP+ ports

Port indicators

Left indicator Link status Right indicator Connection speed

Unlit

The link is lost.

(unavailable)

Unlit

Not connected.

Alternatively, connected

by 10BASE-T.

Lit (green)

A link is established.

(available)

Lit (orange)

Connected by

100BASE-TX.

Flashing (green) Data is flowing. Lit (green)

Connected by

1000BASE-T.

Left indicator Link status Right indicator Connection speed

Unlit

The link is lost.

(unavailable)

Unlit Not connected.

Lit (green)

A link is established.

(available)

Lit (green)

Connected by

1000BASE-SX/LX or

10GBASE-SR/LR.

If using the DAC-SWRT-

3M or DAC-SWRT-1M,

connected at 10 Gbps.

Flashing (green) Data is flowing.

Left

Indicator

LAN ports (upper row)

LAN ports (lower row) SFP/SFP+ ports (lower row)

SFP/SFP+ ports (upper row)

Left

Indicator

Left

Indicator

Left

Indicator

Right

Indicator

Right

Indicator

Right

Indicator

Right

Indicator

Attaching the legs

20 SWR2310-28GT SWR2310-18GT SWR2310-10G

Attaching the legs

As shown in the illustration, attach the included legs in the positions of the leg attachment

guides, and place the unit on a level location such as a desk.

Installation in a rack

Please read before mounting the unit into a rack

• This unit is warrantied to operate in an ambient temperature range of 0–50 °C. If you

install this unit along with other devices into an EIA-standard or JIS-standard rack,

the temperature inside the rack may rise due to heat released from the other

devices, resulting in poor performance of the unit. To prevent the temperature inside

the unit from rising, mount the unit in the rack in accordance with the requirements

below.

• If you plan to rack-mount the unit along with a device that tends to generate heat,

such as an amplifier (excluding an XMV series), be sure to leave a gap of 1U or

more from such devices. Also, be sure to maintain sufficient ventilation in this space

by installing a ventilation panel or leaving it open.

• Open the rear panel of the rack, and place the rack at least 10cm (about four

inches) away from the walls and ceiling to ensure sufficient ventilation. If you cannot

open the rear panel of the rack, install a commercially-available forced ventilation

device, such as a fan kit. If you install a fan kit, closing the rear panel may work

better for heat dissipation purposes. For more information, refer to the owner’s

manual for the rack and/or fan kit.

Caution

If you plan to relocate the rack, be sure to first remove this unit from the rack.

If you move the unit while it is still installed in the rack, vibration or physical shock might deform

or damage the rack mount accessory or rack mount hardware, causing injury. There is also a

possibility that this unit might malfunction.

2 4 6 8 10 12 14 16

1357911 1315

Leg

Leg attachment guides

La pagina sta caricando ...

Yamaha SWR2310 Manuale del proprietario

Marca: Yamaha

Modello: SWR2310

Categoria: Networking

Tipo: Manuale del proprietario

Scarica il pdf

rapporto

in altre lingue

English: Yamaha SWR2310 Owner's manual
français: Yamaha SWR2310 Le manuel du propriétaire
español: Yamaha SWR2310 El manual del propietario
Deutsch: Yamaha SWR2310 Bedienungsanleitung
Nederlands: Yamaha SWR2310 de handleiding
português: Yamaha SWR2310 Manual do proprietário
dansk: Yamaha SWR2310 Brugervejledning
čeština: Yamaha SWR2310 Návod k obsluze
polski: Yamaha SWR2310 Instrukcja obsługi
română: Yamaha SWR2310 Manualul proprietarului

Yamaha SWR2310 Manuale del proprietario

Yamaha SWR2310 Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti