Vemer Tuo Wi-Fi Batteria Nero Manuale utente

Cronotermostato

Digitale

TUO WI-FI BATTERIA

Manuale d’Uso

User Manual

DIGITAL CHRONOTHERMOSTAT

PDF

English

- 41 -

Tuo Wi-Fi Batteria Chronothermostat User Manual

Index

Q Safety warnings Page 42

Q Important usage notes Page 43

Q Dimensions Page 44

Q Connection diagram Page 44

Q Device description Page 45

Q Device installation and conﬁguration Page 46

Q App description Page 51

Q Operating mode Page 56

Q Conﬁguration menu description Page 58

Q CLOCK menu - Date and time settings Page 59

Q PROG menu - Programs setting Page 61

Q SET menu - Temperatures T1, T2, T3 setting Page 63

Q TIMER menu - Timing setting Page 64

Q ADV menu - Advanced parameters setting Page 65

- operating mode Page 65

- type of regulation Page 66

- parameters for regulation type Page 66

- antifreeze temperature Page 67

- adjustment of the measured temperature Page 67

- modem Wi-Fi (NET) Page 68

- Wi-Fi menu Page 69

- minimum/maximum settable temperature Page 70

- activation / deactivation of the keypad lock Page 70

- operating hour meter Page 71

- battery charge level Page 71

Q Other functions of the device Page 72

- display of minimum/maximum daily temperature Page 72

- keypad unlock Page 72

Q Device reset Page 73

Q Regulation types Page 74

Q How to do in case of replacement of the Access Point Page 75

Q How to transfer control of the device from one account (user) to another Page 75

Q Technical characteristics Page 76

Q Disposal of Batteries Page 77

Q Reference standards Page 77

Q Winter programs Page 78

Q Summer programs Page 79

English

- 42 -

Tuo Wi-Fi Batteria Chronothermostat User Manual

This device is an electronic wall-mounting Wi-Fi chronothermostat powered by

batteries, designed to act on the control circuit of the burner or of the circulation pump

(heating mode) or on the control circuit of the air conditioner (air conditioning mode) in

order to guarantee maintenance of the desired temperature.

Thanks to the Vemer Cloud service, you can access your device from anywhere in the

world through the internet connection. Just connect the device to the home router

and install the “Clima Wi-Fi”app, which can be downloaded from the iOS and Android

stores, on your smartphone.

However, the device can also be used without connection to the Vemer Cloud, as a

common weekly chronothermostat with batteries.

The choice whether to use the device with Wi-Fi connection or not, takes place during

the initial conﬁguration; this choice can however be changed by the user at any time.

Code Model Description

VE788600 Tuo Wi-Fi Batteria Bianco Wi-Fi chronothermostat with batteries colour white

VE788700 Tuo Wi-Fi Batteria Nero Wi-Fi chronothermostat with batteries colour black

QDuring installation and operation of the device, it is necessary to comply with

the following instructions:

1) The device must be installed by a skilled person, in strict compliance with the

connection diagrams.

2) Do not power on or connect the device if any part of it is damaged.

3) After installation, inaccessibility to the connection terminals without

appropriate tools must be guaranteed.

4) The device must be installed and activated in compliance with current electric

systems standards.

5) Before accessing the connection terminals, verify that the leads are not live.

6) The device performs actions of 1B type and is suitable for environments

with pollution degree 2 and overvoltage category III (EN 60730-1).

SAFETY WARNINGS

Cloud VemerTuo Wi-Fi Batteria Access Point App

English

- 43 -

Tuo Wi-Fi Batteria Chronothermostat User Manual

In order to extend the battery life, the keypad is active only when the backlighting is on.

To activate the keypad, you need to press the key SET. The keypad remains active

as long as the backlighting is turned on.

This operation is not shown in the procedures described here below in this user

manual, but the user must take it into account every time he intends to use the

device keypad.

The “energy saving" function is useful for extending the life of the batteries because

it allows you to set the frequency with which the device connects to the Vemer Cloud to

download any programming updates.

The basic setting (factory conﬁguration) requires the device to log in to the Cloud:

• in the winter period (from October 1st to April 30th) once every 15 minutes

in the time slot from 6:00 to 24:00 and once every hour in the time slot

from 24:00 to 6:00

• in the summer period (from May 1st to September 30th) once every 8 hours

This setting should ensure the ideal compromise between battery life and parameters

update frequency, but can be customized by the user using the app "Clima Wi-Fi"

(see page 55).

It is important to keep in mind that any programming update can be received

only by the device only at the next programmed connection to the Cloud.

If the user is close to the device, he can still force a connection by pressing

the key for at least 3 seconds until the symbol starts ﬂashing.

IMPORTANT USAGE NOTES

3s

English

- 44 -

Tuo Wi-Fi Batteria Chronothermostat User Manual

DIMENSIONS

CONNECTION DIAGRAM

1&12 &

130

85

28

English

- 45 -

Tuo Wi-Fi Batteria Chronothermostat User Manual

Clock

Day of the week

Off operation

Active load (conditioning mode)

Active load (heating mode)

Measured temperature

Running daily program divided into 24 histograms, one for each hour of the day.

Each hour is associated with one of the 3 temperatures:

Temperature T1 Temperature T2 Temperature T3

Active timed operation

Connection to the Vemer Cloud in progress

Connection to the active Wi-Fi network

Conﬁguration menu:

ADV advanced parameters of the device

TIMER timings

SET automatic operating temperatures T1, T2, T3

PROG automatic operating programs

CLOCK date and time

Local active operation. In this status the device is disconnected from the

Cloud Vemer and any change in operation must be made using the keys on the

chronothermostat. Local operation can be disabled only by the app (see page 54)

Active keypad lock

Connection error information

DEVICE DESCRIPTION

English

- 46 -

Tuo Wi-Fi Batteria Chronothermostat User Manual

DEVICE INSTALLATION AND CONFIGURATION

The device can be installed on the wall or to cover the 3-module ﬂush-mounting box

(type 503).

We recommend positioning at a height of 1.5 meters from the ﬂoor, in an area that

respects as much as possible the average temperature conditions of the entire

environment. Make sure that the distance between the Access Point and the device is

such as to guarantee stable communication.

Avoid installation near doors or windows, in niches, behind doors and curtains or

in positions with excess or total lack of ventilation, to avoid that the reading of the

temperature measured by the probe is in some way offset.

Device installation

Preliminary operations

If you intend to use the device by remote control, before proceeding with the

installation and conﬁguration make sure you have a Vemer account available.

To create a Vemer account,

proceed as follows:

1. Install and start the "Clima Wi-Fi" app

on your smartphone (or tablet)

2. Choose “Register” and ﬁll in the “e-mail”

and “password” ﬁelds

Note: for security reasons it is

recommended to choose a password

different from the one used to access

your e-mail box

3. Check your e-mail box: conﬁrm the

activation of the account by clicking on

the link contained in the e-mail sent

by the system

4. Log in by entering the e-mail address

and password chosen in the registration

process

English

- 47 -

Tuo Wi-Fi Batteria Chronothermostat User Manual

Installing the device.

To install the device proceed as follows:

1. press the retaining hook on the underside to disconnect the display from the base

2. unscrew the terminal block cover (A)

3. pass the wires for connection to the boiler (or air conditioner) through the hole in

the base and fix the latter to the wall (or to cover the 3-module recessed box) using

the supplied screws (B) and connect the relay to the boiler or air conditioner control

circuit

4. close the cover of the terminal block and tighten the sealing screw (C)

5. insert the batteries observing the correct polarity and taking care not to bend the

contact strips (D)

6. reposition the display on the base, first coupling the teeth on the upper side (E)

7. turn the display until it hooks onto the retaining hook on the underside, applying

slight pressure on the hook until you hear a "click" (F)

8. the display turns on: proceed with the device configuration

A

C

B

D

E F

click

English

- 48 -

Tuo Wi-Fi Batteria Chronothermostat User Manual

Device conﬁguration with remote control (for Android)

To configure the device after the first power up or after a factory reset using an Android

smartphone, proceed as follows:

1. While the screen shown is displayed in the figure

on the side, press the keys and to choose

NET ON and press the key to confirm

(a lack of choice within 30 seconds is equivalent

to choosing NET ON).

2. Make sure the device displays “ Conf nEt”.

If not, press the keys and simultaneously for a long time

until the display shows “ Conf nEt” and the icon starts ﬂashing

(wait for it to become steady before proceeding with the next point).

3. Start the app, choose “New Thermostat”, select the TUO BATTERIA model

among those available and press "Next".

4. Select the network “iwm...” to connect to the network generated by the device.

Wait for the device display to show the icon to indicate the successful connection

between the app and the device.

5. Now choose the Wi-Fi network to connect the device to and enter the password,

be careful to digit faithfully all characters (uppercase, lowercase, spaces, digits)

that compose them. Conﬁrm to continue.

Important: before proceeding make sure that the icon on the device display is

still on. Otherwise, access the Wi-Fi settings of the smartphone to manually

reconnect to the "iwm ..." network

6. The device restarts: wait for the icon on the device to become steady and the

icon to start flashing.

7. Enter a name that identiﬁes the Tuo Wi-Fi Batteria, and choose an icon to help to

identify the device from those proposed and conﬁrm.

8. The conﬁguration procedure is ﬁnished. Now:

the app displays the list of devices associated with your account among which also

the newly associated device must appear.. 

The Tuo Wi-Fi Batteria displays the main screen. Check that the icon is steady

and the time shown at the top left is correct.

NOTE: If the conﬁguration is not successful, the message "Err" followed by a number

may appear on the device display. Repeat the conﬁguration procedure be careful to

digit faithfully all characters (uppercase, lowercase, spaces, digits).

English

- 49 -

Tuo Wi-Fi Batteria Chronothermostat User Manual

Device conﬁguration with remote control (for iOS)

To configure the device after the first power up or after a factory reset using an iPhone

proceed as follows:

1. While the screen shown is displayed in the figure

on the side, press the keys and to choose

NET ON and press the key to confirm

(a lack of choice within 30 seconds is equivalent

to choosing NET ON).

2. Make sure the device displays “ Conf nEt”.

If not, press the keys and simultaneously for a long time until the display

shows

“ Conf nEt” and the icon starts ﬂashing (wait for it to become

steady before proceeding with the next point).

3. Start the app, choose “New Thermostat”, select the TUO BATTERIA model among

those available and press "Next".

4. Connect to the “iwm...” network generated by the device by following the

instructions on the App. Check that the device display shows the icon and wait

for the icon to appear on the iPhone display to indicate successful connection

between the app and the device.

5. Now enter the complete name of the Wi-Fi network where connect the device and

enter the password, be careful to digit faithfully all characters (uppercase,

lowercase, spaces, digits) that compose them. Conﬁrm to continue.

Important: before proceeding make sure that the icon on the device display

is still on. Otherwise, access the Wi-Fi settings of the smartphone to manually

reconnect to the "iwm ..." network

6. The device restarts: wait for the icon on the device to become steady and the

icon to start flashing.

7. Enter a name that identiﬁes the Tuo Wi-Fi Batteria, and choose an icon to help to

identify the device from those proposed and conﬁrm.

8. The conﬁguration procedure is ﬁnished. Now: 

the app displays the list of devices associated with your account among which also

the newly associated device must appear.. 

The Tuo Wi-Fi Batteria displays the main screen. Check that the icon is steady

and the time shown at the top left is correct.

NOTE: If the conﬁguration is not successful, the message "Err" followed by a number

may appear on the device display. Repeat the conﬁguration procedure be careful to

digit faithfully all characters (uppercase, lowercase, spaces, digits).



English

- 50 -

Tuo Wi-Fi Batteria Chronothermostat User Manual

Device conﬁguration without remote control

To use the device as a normal weekly chronothermostat with batteries (without Wi-Fi

connection), proceed as follows:

1. When the screen shown in the figure on the side

is displayed, press the keys and to choose

NET OFF and press the key to confirm (a lack of

choice within 30 seconds is equivalent to choosing

NET ON)

2. Set date and time. To set the date and time:

Set the seconds

(reset only) Set the minutes Set the time

Set the year Set the month Set the day

To exit the date and time setting:

• press the key for a long time to return to the home screen

• to change the settings of the summer/winter time change, press the key

for a long time (see "Conﬁguration of the summer/winter time change" on page 60)

NOTE: if the device has been conﬁgured without remote control and later

you want to connect it to the home Wi-Fi network, proceed as follows:

1. press the keys and simultaneously for a long time until the display

shows “ Conf nEt”.

2. follow points 3-4-5-6-7-8 of the conﬁguration procedure with remote control

described on page. 48 or 49.

English

- 51 -

Tuo Wi-Fi Batteria Chronothermostat User Manual

APP DESCRIPTION

Thanks to the app you can control your device remotely, easily and intuitively.

identiﬁes a device or created group

allows you to record a new device

allows you to group several devices

Page “Devices list”

Main page

This screen shows the "TUO Wi-Fi Batteria" status:

indicates the measured temperature (25.0°C),

the operating mode (Heating),

the system status:

( ) red = on

( ) gray = off

indicates the set temperature

and running program name:

touch this area to access the program list

indicates operating mode:

touch this area to change the operating mode

(heating/cooling) and mode (automatic/manual/off).

English

- 52 -

Tuo Wi-Fi Batteria Chronothermostat User Manual

To modify an existing program, select the proﬁle program of the day to be modiﬁed.

Created a program for a day, it's possible to copy it to any other day of the week

(“Copy” function). It is also possible to set a delay of switching by tapping on the

desired time. To know what a switching delay is, see page 62.

Modify a program

to create a new program

to select, to modify, to delete or

to rename an existing program

Note: the padlock to the left of the name

WINTER DEFAULT indicates that the program

can not be modiﬁed or canceled

"Programs List" page

From the “Program List” screen, it is possible to:

English

- 53 -

Tuo Wi-Fi Batteria Chronothermostat User Manual

Conﬁguration menu

Touch the symbol on the upper right to access the advanced conﬁguration.

access to the setting screen

set the name of “TUO BATTERIA”

modify the icon that identifies it

set the themperature values

TO, T1, T2 and T3

NOTE: the chronothermostat is compatible with Google Home and Amazon Echo.

By the association with Google or Amazon account is possible to interact with the

device by giving voice commands by speaking to the Voice Assistant via the voice

activated speaker.

“Tuo Wi-Fi Batteria” settings

bo

l

on the upper right t

o a

c

English

- 54 -

Tuo Wi-Fi Batteria Chronothermostat User Manual

Set vacation days in which the regulation is turned

off by selecting them on the calendar.

Set a holiday period

During the holiday period the

operation ﬁled shows VAC

Advanced settings

access the screen for setting the temperature,

blocking local operation, choosing the time

zone and energy saving (battery management)

enter the user email who will receive

the alarm

set temperature thresholds, low battery

warning and delay to activate the alarm

NOTE: LOCAL OPERATION

When the chronothermostat keyboard is operated, the device activates local operation.

In this way the device does not check if there are new settings on the Cloud and

adjusts the temperature according to the settings entered from the keyboard (the

programming and configuration on the Cloud are not changed).

English

- 55 -

Tuo Wi-Fi Batteria Chronothermostat User Manual

Energy saving (battery management)

Energy Saving Save

BATTERY

78 % available 156 remaining days

ENERGY MANAGEMENT

BASE

The data is updated by time bands (less frequent at night) and

by periods of the year (less frequent in the summer)

ON

OFF

PERSONALIZED

It is possible to obtain the MAXIMUM energy saving by turning

o the wi modem. The switching o and on of the modem can

only be done the thermostat menu.

LOW CONSUMPTION

The time between one data update and the next is xed and

occours every 8 hours.

It is possible to obtain the MAXIMUM energy saving by turning

o the wi modem. The switching o and on of the modem can

only be done the thermostat menu.

scheduled

With this function you can set the frequency with

which the device connects to the Cloud

• "BASIC" setting:

- from October 1st to April 30th : every 15

minutes in the time slot from 6:00 to 24:00

and every hour in the time slot from 24:00

to 6:00

- from May 1st to September 30th: every 8 hours

• "CUSTOM" setting:

- to set the time interval between one connection

and the other.

Minimum value 10 minutes, maximum value

6 hours.

• LOW CONSUMPTION" setting:

- to set up a connection every 8 hours.

Local operation is indicated both on the device display by the icon and on the app.

Local operation can be stoped and/or disabled at any time from the app (but not from

the device). If local operation is disabled (useful if you want to have control of the

device only from the app), the icon will appear on the display and when you try to

access the configuration menu using the device keyboard, will not be possible to make

changes.

English

- 56 -

Tuo Wi-Fi Batteria Chronothermostat User Manual

The device can operate according to the following 3 modes:

Automatic mode

It allows you to use the device as a

chronothermostat and the temperature

regulation follows the "proﬁle" of the

set program.

The program proﬁle assigns one of the 3

temperatures T1, T2 or T3 to each hour of the day.

It is possible to assign a different program to each day of the week.

In the example, the device adjusts the temperature based on the value of:

T2 from 00:00 to 6:00 and from 8:00 to 17:00

T3 from 6:00 to 8:00 and from 17:00 to 21:00

T1 from 21:00 to 24:00

The values of T1, T2 and T3 can be set by the user.

Manual mode

It allows you to use the device as

a thermostat and the regulation is according

to the temperature Tm.

Off mode

It is suitable when long periods of absence are expected.

In this mode the device does not perform any regulation

however, if it works in heating mode, it maintains a

minimum temperature (antifreeze temperature) to prevent

possible freezing of the system.

OPERATING MODE

program

profile

English

- 57 -

Tuo Wi-Fi Batteria Chronothermostat User Manual

To switch from automatic to manual operation

Manual

operation

Tm operation

Automatic

operation

To switch from manual to automatic operation

To switch from automatic operation (or manual) to the one switched off and

viceversa

Manual

operation

Automatic

operation

Tm operation

Automatic

operation

Off

operation

English

- 58 -

Tuo Wi-Fi Batteria Chronothermostat User Manual

CONFIGURATION MENU DESCRIPTION

SET

The SET menu allows you to modify of

the values of the 3 temperatures of the

automatic operation (T1, T2, T3).

The TIMER menu allows setting of

one of the 3 timed operations.

The PROG menu allows you to change the

programming of the automatic operating

mode.

The ADV menu allows you to conﬁgure

the general operating parameters

of the device.

The CLOCK menu allows you to set date

and time. It also allows the conﬁguration

of the daylight saving time change.

La pagina si sta caricando...

Vemer Tuo Wi-Fi Batteria Nero Manuale utente

Questo manuale è adatto anche per

Vemer Tuo Wi-Fi Batteria Nero Manuale utente

in altre lingue

Documenti correlati

Altri documenti