Vemer Mithos GSM RF Bianco Manuale utente

Marca: Vemer

Modello: Mithos GSM RF Bianco

Tipo: Manuale utente

Questo manuale è adatto anche per

Cronotermostato

Digitale

Mithos GSM RF

Manuale d’Uso

User Manual

DIGITAL CHRONOTHERMOSTAT

English

- 1 -

Mithos GSM RF Chronothermostat User Manual

■ Assembly Page 4

■ Dimensions Page 5

■ Connection diagram Page 5

■ Safety warnings Page 6

■ Technical characteristics Page 6

■ Control elements / display indications Page 7

■ Initial start-up / Reset Page 10

■ Clock setting Page 13

■ Programs setting Page 15

■ Temperatures setting Page 17

■ Manual operation Page 18

■ Summer / winter operation Page 19

■ Mithos GSM RF turning off from keyboard Page 20

■ Timings Page 20

■ Advanced programming Page 22

■ Advanced functions Page 31

■ Regulation type Page 34

■ GSM interface Page 36

■ Managing the chronothermostat Page 39

■ Managing the alarms Page 45

■ Backup battery Page 51

■ Reference standards Page 51

■ Winter programs Page 52

■ Summer programs Page 53

Index

English

- 2 -

Mithos GSM RF Chronothermostat User Manual

Mithos GSM RF digital chronothermostat

• Power supply: 230 V AC

(with rechargeable backup battery

NiMh type AA)

• Comfort and control of consumptions

are ensured both in winter and in

summer (heating/air conditioning)

• Integrated GSM module for the remote

control of the chronothermostat

through your mobile

• Interchangeable silver cover available

as accessory (code VE323200)

• Installation can be wall or box 503

coverage (3 modules)

• Display of the operation status, time,

day and internal and

external temperature

• Weekly programming with three temperature

values controllable during the day

English

- 3 -

Mithos GSM RF Chronothermostat User Manual

Mithos GSM RF digital chronothermostat

Solution 1: Mithos GSM RF controls system via relay

...

boiler / conditioner

Mithos GSM RF

boiler / conditioner

actuators for other

loads

actuators for other

loads

Solution 2: Mithos GSM RF controls system via radiofrequency

Solution 3: Mithos GSM RF controls via relay system and other loads (up to 7)

via radiofrequency

Solution 4: Mithos GSM RF control system via radiofrequency and other loads

(up to 7) via radiofrequency

English

- 4 -

Mithos GSM RF Chronothermostat User Manual

ASSEMBLY

• It is advisable to place the chronothermostat

in an area that mirrors, as much as possible,

the conditions of average temperature of

the entire environment. Avoid installing too

close to doors, windows, heat sources, direct

sunlight radiation and positions with excess

or total lack of air inlet.

It is moreover advised to install the

environment chronothermostat at about

150 cm from the ﬂoor and in an area in wich

the GSM signal is good.

Assembly can be wall or box 503 coverage

English

- 5 -

Mithos GSM RF Chronothermostat User Manual

DIMENSIONS

CONNECTION DIAGRAM

Ingresso per

X.Temp o DIG

COM

230 V~ 1

230 V ~

Input for

X.temp or DIG

COM

132

English

- 6 -

Mithos GSM RF Chronothermostat User Manual

■ During installation and operation of the product, it is necessary to comply

with the following instructions:

1) The device must be installed by a skilled person, in strict compliance with the

connection diagrams.

2) Do not power on or connect the device if any part of it is damaged.

3) After installation, inaccessibility to the connection terminals without

appropriate tools must be guaranteed.

4) The device must be installed and activated in compliance with current electric

systems standards.

5) Before accessing the connection terminals, verify that the leads are not live.

6) The use of a GSM device can cause interference with the functioning of

electronic devices non-screened from radiofrequency signals (electromedical

devices, pacemakers, hearing aids etc.)

TECHNICAL CHARACTERISTICS

• Power supply: 230 V AC (-15% ÷ +10%) 50/60Hz

• Charge reserve: about 10 hours thanks to the backup battery

• Backup battery:NiMH rechargeable type AA, capacity 2000 mAh or higher

 Use rechargeable NiMH battery only

SAFETY WARNINGS

■ Mithos GSM RF is an electronic wall-mounting chronothermostat with GSM

module to be controlled remotely by sending an SMS or by using a suitable APP and

radiofrequency module to control the heating (or air-conditioning) system by sending a

radiofrequency signal to a remote actuator of Vemer range. The radiofrequency module

is used to associate the Mithos GSM RF up to 7 auxiliary actuators, which can be turned

on/off remotely with a simple SMS message. Mithos RF GSM executes actions of 1B

type and suitable for environments with a pollution degree 2 and overvoltage category III

(EN 60730-1).

Code Model Description

VE757000 Mithos GSM RF Nero

Wall-mounting chronothermostat GSM RF 230 V AC

VE756900 Mithos GSM RF Bianco

Wall-mounting chronothermostat GSM RF 230 V AC

VE323200 FR.Mithos Silver cover

English

- 7 -

Mithos GSM RF Chronothermostat User Manual

• Auxiliary input conﬁgurable to connect alternately:

- a non-voltage contact (DIG)

- X.Temp external temperature probe

• Output:

- 1 bistable relay with change-over contact 8A / 250V AC

- 1 radiofrequency channel to control the heating / air-conditioning system (to be used

as an alternative to the relay)

- 7 channels on radiofrequency to control the same number of remote actuators

• 5 temperature settings:

- T3, T2, T1 for automatic regulation

- T0 antifreeze temperature settable in advanced programming

- T temperature in manual operation

• Temperature regulation:

- ON/OFF with differential settable between 0.1°C and 1°C

- PROPORTIONAL with settable proportional band and regulation period setting

• Weekly programming

• Daily resolution: 1h

• Delay activation settable between 15, 30 and 45 minutes (independent for every hour)

• Measured temperature scale:

– 0°C ÷ +50°C (internal probe)

– -40°C ÷ +60°C (external probe)

• Measured and displayed temperature resolution: 0.1°C

• Temperature regulation range: 2.0°C ÷ +50°C

• Measurement update: every 20 seconds

• Measurement precision: ± 0.5°C

• Winter or summer or manual operation

• Optional display in °F

• Automatic change CET / DST

• Password protected keypad lock for installation in public places

• GSM quad band module (900 - 950 - 1800 - 1900 MHz)

• Transmission frequency: 433.92 MHz (for RF signals)

• Possibility to store up 5 numbers with which to control the device

• Wall mounting (or on 503 type box)

• Terminal block:

- Output: 3 poles 1.5mm

for bistable relay

- Input: 2 poles 1.5mm

for external probe or digital input

2 poles 1.5mm

for connection of the power supply

• Operating temperature: 0 °C ÷ +50 °C

• Operating humidity: 20% ÷ 90% non condensing

• Storage temperature -10°C ÷ +65°C

• Degree of protection: XXD

English

- 8 -

Mithos GSM RF Chronothermostat User Manual

➔

■ Control elements

1) “ ” Key: manual operation

2) “ ” Key: increases the selected ﬁeld

or displays the daily maximum

temperature

3) “ ” Key: decreases the selected ﬁeld

or displays the daily minimum

temperature

4) “ ” Key: conﬁrms the set data

5) “ ” Key: activation and deactivation of the chronothermostat

6) “ ” Key: selects temperature T3

7) “ ” Key: selects temperature T2

8) “ ” Key: selects temperature T1

9) “ ” Key: allows to set a timing or an activation delay

10) “ ” Key: programs setting or advanced programming

11) “ ” Key: clock setting

12) “ ” Key: winter operation (preset) or summer operation (the key is reachable

only with a point)

13) “ ” Key: deletes date and time but not the set programs (to do this see

"Restoring default parameters" page 33)

(the key is reachable only with a point).

CONTROL ELEMENTS / DISPLAY INDICATIONS

The preset temperature values (expressed in °C) are the following:

funct. winter funct. summer

T1 5.0 OFF

T2 15.0 23.0

T3 18.0 25.0

TMANUAL 20.0 24.0

Regulation of temperature levels is subjected to the following condition: T1 ≤ T2 ≤T3.

In summer mode, T1 cannot be set and corresponds to the air conditioning OFF.

English

- 9 -

Mithos GSM RF Chronothermostat User Manual

■ display indications

14) “Day”

Field

15) “External temperature”

Field

16) “Environment temperature”

Field

17) “Set program”

Field

18) “Manual operation activation”

Field

19) “Timings”

Field

20) “Air conditioning activation”

Field

21) “Heating activation”

Field

22) “Clock”

Field

23) “Ring or incoming sms”

Field

24) “Gsm module status”

Field

25) “Unit of measurement”

Field

26) “Off”

Field

14 24 19

20 18

English

- 10 -

Mithos GSM RF Chronothermostat User Manual

INITIAL START-UP / RESET

Mithos GSM RF is a chronothermostat thought to be controlled remotely via SMS or

APP. To make this possible, it is necessary to have a SIM card of a telephone operator

to ensure a good coverage of GSM signal receiving.

1. Connecting the Mithos GSM RF to the GSM network

Mithos GSM RF is able to determine which operator ensures the best GSM coverage in

the area of installation.

Testing the GSM signal intensity

1. Turn on the Mithos GSM RF and make sure that no SIM card is inserted in the

housing

2. Press the “R” key and right after the “ ” key

3. The display shows “FLD” and then a screen like this:

Identifying operator Operator name

01 – 43 – 48 TIM

10 – 06 VODAFONE

88 – 44 WIND

99 – 33 3

4. Press the “ ” and “ ” keys to

scroll and check the intensity of the

signals of all detected operators.

5. To exit, press the “R” key

It is advisable to choose a SIM card of the

operator with the highest signal intensity.

Requirements of the SIM card

– It must be enabled to telephone trafﬁc (voice, not SIM data)

– it must have the PIN code request disabled (if necessary use a mobile phone to

disable the request)

– it must have the voice mail disabled

Identificativo

operatore

Intensità del segnale

Progressivo

operatore rilevato

Progressive

detected operator

Identifying

operator

Signal intensity

English

- 11 -

Mithos GSM RF Chronothermostat User Manual

Insert the SIM card into the housing in the

underside of the Mithos GSM RF, with the rounded

edge facing inwards and to the right, the housing is

of push-push type (push to insert the SIM card and

press to remove it).

The status of the connection to the GSM network is

symbolized by the icon on the display:

– lit ﬁ xed: connected to the GSM network

– lit blinking: SIM card not inserted, GSM network

coverage lack / GSM network search

2. Connecting the Mithos GSM RF to the heating system

Mithos GSM RF can control the heating / air conditioning system in two ways:

- via relay

- via radiofrequency (RF) signal to be sent to a remote actuato

Connection to the system via relay

Connect the relay output respecting the diagram on page 5.

Caution: before making connections, be sure to disconnect the power supply

Connection to the system via radiofrequency (RF)

The connection to the system via radiofrequency assumes to have a remote actuator

of Vemer range to be associated with Mithos RF GSM.

The activation of heating / air conditioning occurs via the remote actuator controlled

by the Mithos GSM RF by means of a radiofrequency signal.

• To choose how to control the system, see page 27

3. Connecting the Mithos GSM RF to other actuators

Mithos GSM RF enables allows you to control via radiofrequency up to 7 independent

actuators.

This, coupled with the fact that the Mithos GSM RF can be controlled remotely via

GSM, implies that it is possible to control remotely up to 7 independent devices.

To do this you need to conﬁ gure the connection between Mithos GSM RF and

actuators.

• To choose how to control the system, see page 27

English

- 12 -

Mithos GSM RF Chronothermostat User Manual

4. Auxiliary input connection

The chronothermostat allows you to connect a remote external temperature probe

for the displaying (and possibly also regulation) of the temperature measured where

the probe is placed or a not in live contact in case you want to connect an auxiliary

external device (for example a gas detector, an anti-theft system, a block boiler

detection system, ...).

In this last case, a possible change of the input status can be signaled by sending

an SMS to a speciﬁed number (for more info, see “GSM INTERFACE” on page 36).

• To conﬁgure the auxiliary external input, see page 26

English

- 13 -

Mithos GSM RF Chronothermostat User Manual

CLOCK SETTING

• Press the “ ” key; on ﬁeld (16)

seconds will run ﬂashing, while ﬁeld (22)

will display digits for minutes and hours.

Press the “ ” key to reset seconds

and increase the minutes ﬁeld by 1 or

“ ” to reset the seconds ﬁeld.

Press the “ ” key to conﬁrm.

(In case the setting of the clock takes

place after a reset, the ﬁrst parameter to

set will be the “ minutes" ﬁeld).

At this point, the minutes digit will start ﬂashing.

Use the “ ” and “ ” keys to increase or decrease the ﬁeld and press “ ” to

conﬁrm.

Repeat the procedure to set the hours.

Once the value for the hours is set, ﬁeld (22) will display a ﬂashing value of the year,

ﬁeld (15) the value of the month and ﬁeld (16) the value of the day.

English

- 14 -

Mithos GSM RF Chronothermostat User Manual

Press the “ ” and “ ” keys to modify the values and “ ” to conﬁrm.

Once the day is set, press the “ ” key to exit the menu.

Upon exiting such procedure the clock indication will not ﬂash any more; ﬁeld (16) will

display the environment temperature again, while, if the external probe is connected,

ﬁeld (15) will display the external temperature.

English

- 15 -

Mithos GSM RF Chronothermostat User Manual

PROGRAMS SETTING

• Pressing the “ PRG ” key on ﬁeld (14)

the indication regarding Monday will

be displayed, ﬁeld (16) will display the

selected program ﬂashing (in the example:

P1), ﬁeld (15) will display “ Pro ”, ﬁeld

(17) will display the graphic trend of the

corresponding program and will activate

symbol (20) or (21) depending on the set

operation (summer or winter).

If the selected program is correct, press the

“ ” key to continue to the next day.

• If the selected program is not correct for

that day, you can create another one using

the “ ” and “ ” keys which modify

value “ Px ” contained in ﬁeld (16); as the

program changes, so does the content of

ﬁeld (17) regarding the selected program.

The default programs are listed at the end

of this manual.

Once the correct program is selected, press

the “ ” key to move on to the next day.

•

If no program satisﬁes the user's needs,

choose any program and press the

“ PRG ”

key again; this will bring the

segment of the corresponding ﬁeld

(17)

to ﬂash.

English

- 16 -

Mithos GSM RF Chronothermostat User Manual

With the

and

keys, it is possible

to modify the temperature selected for

that hour and, at the same time, move on

to the next one. Using the

“ ” and

“ ”

keys,

it is possible to move from

one hour to the next without modifying

the set temperature.

Pressing the

“ ”

key,

it is possible

to set the activation delay for that

speciﬁc hour. Each pressure of the

“ ”

key

increases the delay by 15

minutes.

Pressing the

“ ”

key conﬁrms

the modiﬁed program and returns to

the situation with

“ Px ”

ﬂashing on

ﬁeld

(16)

Pressing the

“ ”

key conﬁrms the

program for that day and moves on to

the next day until Sunday appears, after

which operation goes back to normal

mode.

English

- 17 -

Mithos GSM RF Chronothermostat User Manual

TEMPERATURES SETTING

•

In any of the operation modes, pressing

the

and

keys will bring ﬁeld

(22)

to display the writing corresponding to the

temperature that is being modiﬁed; on

ﬁeld

(16)

the value of the aforementioned

temperature will ﬂash.

With the

“ ” and “ ”

keys,

it is

possible to modify the value and with the

“ ”

key

it is possible to conﬁrm the

change and return to normal operation.

The setting limits for the set are reported in

the technical characteristics.

English

- 18 -

Mithos GSM RF Chronothermostat User Manual

MANUAL OPERATION

•

During automatic operation, when pressing the

“ ”

key, the system will act as a

normal thermostat with operating temperature Tm.

Field

(22)

will show the current time.

Field

(14)

will show the current date.

Field

(15)

will display the writing

“ SEt ”

The symbol

(18)

will appear.

Field

(17)

will disappear. On ﬁeld

(16)

the

set manual temperature value will ﬂash.

With the

“ ” and “ ”

keys, it is

possible to change the value from 2.0°C

to 50°C.

Pressing the

“ ”

key

or after 45

seconds from the last operation, ﬁeld

(16)

will display the value of the environment

temperature, while ﬁeld

(15)

will display

the external temperature value (if probe is

connected).

At any time, it is possible to verify the

set temperature pressing the

“ ”

key

or the

“ ”

key; pressing one of the 2

keys again will allow modiﬁcation of the

temperature setting. To move from the

manual program to the automatic one,

simply press the

“ ”

key again for at

least 3 seconds.

La pagina sta caricando ...

Vemer Mithos GSM RF Bianco Manuale utente

Marca: Vemer

Modello: Mithos GSM RF Bianco

Tipo: Manuale utente

Questo manuale è adatto anche per

Scarica il pdf

rapporto

in altre lingue

English: Vemer Mithos GSM RF Bianco User manual

Vemer Mithos GSM RF Bianco Manuale utente

Questo manuale è adatto anche per

Vemer Mithos GSM RF Bianco Manuale utente

in altre lingue

Documenti correlati

Altri documenti