ASROCK H110M-G/M.2 Manuale utente

Version 1.0

Published April 2017

Copyright Notice:

No part of this documentation may be reproduced, transcribed, transmitted, or

translated in any language, in any form or by any means, except duplication of

documentation by the purchaser for backup purpose, without written consent of

ASRock Inc.

Products and corporate names appearing in this documentation may or may not be

registered trademarks or copyrights of their respective companies, and are used only

for identication or explanation and to the owners’ benet, without intent to infringe.

Disclaimer:

Specications and information contained in this documentation are furnished for

informational use only and subject to change without notice, and should not be

constructed as a commitment by ASRock. ASRock assumes no responsibility for any

errors or omissions that may appear in this documentation.

With respect to the contents of this documentation, ASRock does not provide

warranty of any kind, either expressed or implied, including but not limited to the

implied warranties or conditions of merchantability or tness for a particular purpose.

In no event shall ASRock, its directors, ocers, employees, or agents be liable for any

indirect, special, incidental, or consequential damages (including damages for loss

of prots, loss of business, loss of data, interruption of business and the like), even if

ASRock has been advised of the possibility of such damages arising from any defect or

error in the documentation or product.

is device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause

undesired operation.

CALIFORNIA, USA ONLY

e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance

controlled in Perchlorate Best Management Practices (BMP) regulations passed by the Cali-

fornia Legislature. When you discard the Lithium battery in California, USA, please follow

the related regulations in advance.

“Perchlorate Material-special handling may apply, see

www.dtsc.ca.gov/hazardouswaste/perchlorate”

ASRock Website: http://www.asrock.com

AUSTRALIA ONLY

Our goods come with guarantees that cannot be excluded under the Australian Consumer

Law. You are entitled to a replacement or refund for a major failure and compensation for

any other reasonably foreseeable loss or damage caused by our goods. You are also entitled to

have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure

does not amount to a major failure. If you require assistance please call ASRock Tel : +886-2-

28965588 ext.123 (Standard International call charges apply)

e terms HDMI™ and HDMI High-Denition Multimedia Interface, and the HDMI

logo are trademarks or registered trademarks of HDMI Licensing LLC in the United

States and other countries.

1

English

H110M-G/M.2

Motherboard Layout

ATXPWR1

COM1

1

H110M-G/M.2

RoHS

2

CPU_FAN1

5

1

PCIE1

TPMS1

1

PCIE2

Front USB 3.0

12

13

14

15

16

17

18

CMOS

Battery

DDR4_B1 (64 bit, 288-pin module)

DDR4_A1 (64 bit, 288-pin module)

4

3

SATA3 _2

SATA3 _3

USB3 _3 _4

11

SATA3 _0

SATA3 _1

10

1

HD_AUDIO1

M2_1

CT3CT4CT2

Top:

RJ-45

USB 3.0

T: USB3

B: USB4

HDMI1

Top:

LINE IN

Center:

FRONT

Bottom:

MIC IN

PCI Express 3.0

7

8

6

9

CHA_FAN2

VGA1

USB 3.0

T: USB1

B: USB2

Ct1

1

LPT1

USB_5_6

1

BIOS

ROM

19

20

PCIE3

1

SPEAKER1

CI1

1

USB_7_ 8

1

CHA_FAN1

CLRMOS1

ATX 12V1

USB 2.0

T: USB1

B: USB2

PS2

Keyboard

/Mouse

DVI1

Intel

H110

HDLED RESET

PLED PWRBTN

PANEL1

1

2

English

No. Description

1 ATX 12V Power Connector (ATX12V1)

2 CPU Fan Connector (CPU_FAN1)

3 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1)

4 ATX Power Connector (ATXPWR1)

5 USB 3.0 Header (USB3_3_4)

6 USB 2.0 Header (USB_7_8)

7 SATA3 Connector (SATA3_2)

8 SATA3 Connector (SATA3_3)

9 SATA3 Connector (SATA3_1)

10 SATA3 Connector (SATA3_0)

11 Chassis Fan Connector (CHA_FAN2)

12 System Panel Header (PANEL1)

13 Chassis Speaker Header (SPEAKER1)

14 Chassis Intrusion Header (CI1)

15 TPM Header (TPMS1)

16 USB 2.0 Header (USB_5_6)

17 Print Port Header (LPT1)

18 COM Port Header (COM1)

19 Front Panel Audio Header (HD_AUDIO1)

20 Chassis Fan Connector (CHA_FAN1)

3

English

H110M-G/M.2

I/O Panel

No. Description No. Description

1 USB 2.0 Ports (USB_12) 7 USB 3.0 Ports (USB3_1_2)

2 LAN RJ-45 Port* 8 HDMI Port

3 Line In (Light Blue)** 9 D-Sub Port

4 Front Speaker (Lime)** 10 DVI-D Port

5 Microphone (Pink)** 11 PS/2 Keyboard/Mouse Port

6 USB 3.0 Ports (USB34)

* ere are two LEDs on the LAN port. Please refer to the table below for the LAN port LED indications.

Activity / Link LED Speed LED

Status Description Status Description

O No Link O 10Mbps connection

Blinking Data Activity Orange 100Mbps connection

On Link Green 1Gbps connection

ACT/LINK LED

SPEED LED

LAN Port

11 569

10

4

3

1 2

78

4

English

** To congure 7.1 CH HD Audio, it is required to use an HD front panel audio module and enable the multi-channel

audio feature through the audio driver.

Please set Speaker Conguration to “7.1 Speaker”in the Realtek HD Audio Manager.

Function of the Audio Ports in 7.1-channel Conguration:

Port Function

Light Blue (Rear panel) Rear Speaker Out

Lime (Rear panel) Front Speaker Out

Pink (Rear panel) Central /Subwoofer Speaker Out

Lime (Front panel) Side Speaker Out

Chapter 1 Introduction

ank you for purchasing ASRock H110M-G/M.2 motherboard, a reliable

motherboard produced under ASRock’s consistently stringent quality control.

It delivers excellent performance with robust design conforming to ASRock’s

commitment to quality and endurance.

1.1 Package Contents

•

ASRock H110M-G/M.2 Motherboard (Micro ATX Form Factor)

•

ASRock H110M-G/M.2 Quick Installation Guide

•

ASRock H110M-G/M.2 Support CD

•

2 x Serial ATA (SATA) Data Cables (Optional)

•

1 x Screw for M.2 Socket (Optional)

•

1 x I/O Panel Shield

5

English

H110M-G/M.2

Chapter 1 Introduction

ank you for purchasing ASRock H110M-G/M.2 motherboard, a reliable

motherboard produced under ASRock’s consistently stringent quality control.

It delivers excellent performance with robust design conforming to ASRock’s

commitment to quality and endurance.

1.1 Package Contents

•

ASRock H110M-G/M.2 Motherboard (Micro ATX Form Factor)

•

ASRock H110M-G/M.2 Quick Installation Guide

•

ASRock H110M-G/M.2 Support CD

•

2 x Serial ATA (SATA) Data Cables (Optional)

•

1 x Screw for M.2 Socket (Optional)

•

1 x I/O Panel Shield

Because the motherboard specications and the BIOS soware might be updated, the

content of this manual will be subject to change without notice. In case any modications

of this manual occur, the updated version will be available on ASRock’s website without

further notice. If you require technical support related to this motherboard, please visit

our website for specic information about the model you are using. You may nd the latest

VGA cards and CPU support list on ASRock’s website as well. ASRock website http://www.

asrock.com.

6

English

1.2 Specications

Platform

•

Micro ATX Form Factor

•

Solid Capacitor design

CPU

•

Supports 7

th

and 6

th

Generation Intel® Core

TM

i7/i5/i3/

Pentium®/Celeron® Processors (Socket 1151)

•

Supports CPU up to 91W

•

Digi Power design

•

5 Power Phase design

•

Supports Intel® Turbo Boost 2.0 Technology

Chipset

•

Intel® H110

Memory

•

Dual Channel DDR4 Memory Technology

•

2 x DDR4 DIMM Slots Supports DDR4 2400/2133 non-ECC,

un-buered memory*

* 7

th

Gen Intel® CPU supports DDR4 up to 2400; 6

th

Gen Intel®

CPU supports DDR4 up to 2133.

•

Supports ECC UDIMM memory modules (operate in non-

ECC mode)

•

Max. capacity of system memory: 32GB

•

Supports Intel® Extreme Memory Prole (XMP) 2.0

•

15μ Gold Contact in DIMM Slots

Expansion

Slot

•

1 x PCI Express 3.0 x16 Slot (PCIE1: x16 mode)*

* Supports NVMe SSD as boot disks

•

2 x PCI Express 2.0 x1 Slots

Graphics

•

Intel® HD Graphics Built-in Visuals and the VGA outputs can

be supported only with processors which are GPU integrated.

•

Supports Intel® HD Graphics Built-in Visuals : Intel® Quick

Sync Video with AVC, MVC (S3D) and MPEG-2 Full

HW Encode1, Intel® InTru

TM

3D, Intel® Clear Video HD

Technology, Intel® Insider

TM

, Intel® HD Graphics

•

Gen9 LP, DX11.3, DX12

7

English

H110M-G/M.2

•

HWAEncode/Decode: VP8, HEVC 8b, VP9, HEVC 10b (For

7

th

Gen Intel® CPU)

•

HWA Encode/Decode: VP8 , HEVC 8b; GPU/SWEncode/

Decode: VP9, HEVC 10b (For 6

th

Gen Intel® CPU)

•

Max. shared memory 1024MB

* e size of maximum shared memory may vary from dierent

operating systems.

•

ree graphics output options: D-Sub, DVI-D and HDMI

* Supports up to 2 displays simultaneously

•

Supports HDMI with max. resolution up to 4K x 2K

(4096x2160) @ 24Hz / (3840x2160) @ 30Hz

•

Supports DVI-D with max. resolution up to 1920x1200 @

60Hz

•

Supports D-Sub with max. resolution up to 1920x1200 @

60Hz

•

Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and

HBR (High Bit Rate Audio) with HDMI Port (Compliant

HDMI monitor is required)

•

Supports Accelerated Media Codecs: HEVC, VP8, VP9

•

Supports HDCP with DVI-D and HDMI Ports

•

Supports Full HD 1080p Blu-ray (BD) playback with DVI-D

and HDMI Ports

Audio

•

7.1 CH HD Audio (Realtek ALC887 Audio Codec)

* To congure 7.1 CH HD Audio, it is required to use an HD front

panel audio module and enable the multi-channel audio feature

through the audio driver.

•

Supports Surge Protection

•

ELNA Audio Caps

LAN

•

Gigabit LAN 10/100/1000 Mb/s

•

Giga PHY Intel® I219V

•

Supports Wake-On-LAN

•

Supports Lightning/ESD Protection (ASRock Full Spike Pro-

tection)

•

Supports Energy Ecient Ethernet 802.3az

•

Supports PXE

8

English

Rear Panel I/O

•

1 x PS/2 Mouse/Keyboard Port

•

1 x D-Sub Port

•

1 x DVI-D Port

•

1 x HDMI Port

•

4 x USB 2.0 Ports (Supports ESD Protection)

•

2 x USB 3.0 Ports (Supports ESD Protection)

•

1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED

LED)

•

HD Audio Jacks: Line in / Front Speaker / Microphone

Storage

•

4 x SATA3 6.0 Gb/s Connectors, support NCQ, AHCI and Hot

Plug

* If M2_1 is occupied by a SATA-type M.2 device, SATA3_3 will

be disabled.

•

1 x M.2 Socket, supports M Key type 2230/2242/2260/2280 M.2

SATA3 6.0 Gb/s module and M.2 PCI Express module up to

Gen2 x4 (20 Gb/s)*

* Supports NVMe SSD as boot disks

* Supports ASRock U.2 Kit

Connector

•

1 x Print Port Header

•

1 x COM Port Header

•

1 x TPM Header

•

1 x Chassis Intrusion Header

•

1 x CPU Fan Connector (4-pin)

* e CPU Fan Connector supports the CPU fan of maximum 1A

(12W) fan power.

•

2 x Chassis Fan Connectors (4-pin)

•

1 x 24 pin ATX Power Connector

•

1 x 4 pin 12V Power Connector

•

1 x Front Panel Audio Connector

•

2 x USB 2.0 Headers (Support 4 USB 2.0 ports) (Supports ESD

Protection)

•

1 x USB 3.0 Header (Supports 2 USB 3.0 ports) (Supports ESD

Protection)

* USB3_3_4 is shared with USB_7_8.

9

English

H110M-G/M.2

BIOS

Feature

•

AMI UEFI Legal BIOS with multilingual GUI support

•

ACPI 5.0 Compliant wake up events

•

SMBIOS 2.7 Support

•

CPU, DRAM, PCH 1.0V Voltage Multi-adjustment

Hardware

Monitor

•

CPU/Chassis temperature sensing

•

CPU/Chassis Fan Tachometer

•

CPU/Chassis Quiet Fan

•

CPU/Chassis Fan multi-speed control

•

CASE OPEN detection

•

Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore, DRAM,

PCH 1.0V

OS

•

Microso® Windows® 10 64-bit (For 7

th

Gen Intel® CPU)

•

Microso® Windows® 10 64-bit / 8.1 64-bit / 7 32-bit / 7 64-bit

(For 6

th

Gen Intel® CPU)

* To install Windows® 7 OS, a modied installation disk with

xHCI drivers packed into the ISO le is required. Please refer to

page 141 for more detailed instructions.

* For the updated Windows® 10 driver, please visit ASRock’s web-

site for details: http://www.asrock.com

Certications

•

FCC, CE, WHQL, RCM, BSMI

* For detailed product information, please visit our website:

http://www.asrock.com

10

English

is is a Micro ATX form factor motherboard. Before you install the motherboard,

study the conguration of your chassis to ensure that the motherboard ts into it.

Pre-installation Precautions

Take note of the following precautions before you install motherboard components or

change any motherboard settings.

•

Make sure to unplug the power cord before installing or removing the motherboard

components. Failure to do so may cause physical injuries and damages to motherboard

components.

•

In order to avoid damage from static electricity to the motherboard’s components,

NEVER place your motherboard directly on a carpet. Also remember to use a grounded

wrist strap or touch a safety grounded object before you handle the components.

•

Hold components by the edges and do not touch the ICs.

•

Whenever you uninstall any components, place them on a grounded anti-static pad or in

the bag that comes with the components.

•

When placing screws to secure the motherboard to the chassis, please do not over-tighten

the screws! Doing so may damage the motherboard.

Chapter 2 Installation

11

English

H110M-G/M.2

2.1 Installing the CPU

1. Before you insert the 1151-Pin CPU into the socket, please check if the PnP cap is on the

socket, if the CPU surface is unclean, or if there are any bent pins in the socket. Do not force

to insert the CPU into the socket if above situation is found. Otherwise, the CPU will be

seriously damaged.

2. Unplug all power cables before installing the CPU.

1

2

A

B

12

English

4

5

3

13

English

H110M-G/M.2

Please save and replace the cover if the processor is removed. e cover must be placed if you

wish to return the motherboard for aer service.

14

English

2.2 Installing the CPU Fan and Heatsink

1 2

CPU_

FAN

15

English

H110M-G/M.2

2.3 Installing Memory Modules (DIMM)

is motherboard provides two 288-pin DDR4 (Double Data Rate 4) DIMM slots,

and supports Dual Channel Memory Technology.

e DIMM only ts in one correct orientation. It will cause permanent damage to the

motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.

1. For dual channel conguration, you always need to install identical (the same brand,

speed, size and chip-type) DDR4 DIMM pairs.

2. It is unable to activate Dual Channel Memory Technology with only one memory

module installed.

3. It is not allowed to install a DDR, DDR2 or DDR3 memory module into a DDR4 slot;

otherwise, this motherboard and DIMM may be damaged.

16

English

1

2

3

17

English

H110M-G/M.2

2.4 Expansion Slots (PCI Express Slots)

ere are 3 PCI Express slots on the motherboard.

PCIe slots:

PCIE1 (PCIe 3.0 x16 slot) is used for PCI Express x16 lane width graphics cards.

PCIE2 (PCIe 2.0 x1 slot) is used for PCI Express x1 lane width cards.

PCIE3 (PCIe 2.0 x1 slot) is used for PCI Express x1 lane width cards.

Before installing an expansion card, please make sure that the power supply is switched

o or the power cord is unplugged. Please read the documentation of the expansion card

and make necessary hardware settings for the card before you start the installation.

18

English

2.5 Onboard Headers and Connectors

System Panel Header

(9-pin PANEL1)

(see p.1, No. 12)

Connect the power switch,

reset switch and system

status indicator on the

chassis to this header

according to the pin

assignments below. Note

the positive and negative

pins before connecting the

cables.

PWRBTN (Power Switch):

Connect to the power switch on the chassis front panel. You may congure the way to

turn o your system using the power switch.

RESET (Reset Switch):

Connect to the reset switch on the chassis front panel. Press the reset switch to restart the

computer if the computer freezes and fails to perform a normal restart.

PLED (System Power LED):

Connect to the power status indicator on the chassis front panel. e LED is on when the

system is operating. e LED keeps blinking when the system is in S1/S3 sleep state. e

LED is o when the system is in S4 sleep state or powered o (S5).

HDLED (Hard Drive Activity LED):

Connect to the hard drive activity LED on the chassis front panel. e LED is on when

the hard drive is reading or writing data.

e front panel design may dier by chassis. A front panel module mainly consists

of power switch, reset switch, power LED, hard drive activity LED, speaker and etc.

When connecting your chassis front panel module to this header, make sure the wire

assignments and the pin assignments are matched correctly.

Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over

these headers and connectors. Placing jumper caps over the headers and connectors will

cause permanent damage to the motherboard.

GND

RESET#

PWRBTN#

PLED-

PLED+

GND

HDLED-

HDLED+

1

GND

La pagina sta caricando ...

ASROCK H110M-G/M.2 Manuale utente

ASROCK H110M-G/M.2 Manuale utente

in altre lingue

Documenti correlati

Altri documenti