ASROCK E3V5 Performance Gaming Manuale utente

Version 1.1

Published February 2016

Copyright Notice:

No part of this documentation may be reproduced, transcribed, transmitted, or

translated in any language, in any form or by any means, except duplication of

documentation by the purchaser for backup purpose, without written consent of

ASRock Inc.

Products and corporate names appearing in this documentation may or may not

be registered trademarks or copyrights of their respective companies, and are used

only for identication or explanation and to the owners’ benet, without intent to

infringe.

Disclaimer:

Specications and information contained in this documentation are furnished for

informational use only and subject to change without notice, and should not be

constructed as a commitment by ASRock. ASRock assumes no responsibility for

any errors or omissions that may appear in this documentation.

With respect to the contents of this documentation, ASRock does not provide

warranty of any kind, either expressed or implied, including but not limited to

the implied warranties or conditions of merchantability or tness for a particular

purpose.

In no event shall ASRock, its directors, ocers, employees, or agents be liable for

any indirect, special, incidental, or consequential damages (including damages for

loss of prots, loss of business, loss of data, interruption of business and the like),

even if ASRock has been advised of the possibility of such damages arising from any

defect or error in the documentation or product.

is device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

CALIFORNIA, USA ONLY

e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance

controlled in Perchlorate Best Management Practices (BMP) regulations passed by the

California Legislature. When you discard the Lithium battery in California, USA, please

follow the related regulations in advance.

“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/

perchlorate”

ASRock Website: http://www.asrock.com

AUSTRALIA ONLY

Our goods come with guarantees that cannot be excluded under the Australian Consumer

Law. You are entitled to a replacement or refund for a major failure and compensation for

any other reasonably foreseeable loss or damage caused by our goods. You are also entitled

to have the goods repaired or replaced if the goods fail to be of acceptable quality and the

failure does not amount to a major failure. If you require assistance please call ASRock Tel

: +886-2-28965588 ext.123 (Standard International call charges apply)

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535;

7,003,467 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, &

DTS and the Symbol together is a registered trademark & DTS Connect, DTS Interactive,

DTS Neo:PC are trademarks of DTS, Inc. Product includes soware.

Who knew that at age 19, I would be a World Champion PC gamer. When I was 13, I actually

played competitive billiards in professional tournaments and won four or ve games o guys

who played at the highest level. I actually thought of making a career of it, but at that young

age situations change rapidly. Because I’ve been blessed with great hand-eye coordination and

a grasp of mathematics (an important element in video gaming) I gravitated to that activity.

GOING PRO

I started professional gaming in 1999 when I entered the CPL (Cyberathlete Professional

League) tournament in Dallas and won $4,000 for coming in third place. Emerging as one

of the top players in the United States, a company interested in sponsoring me ew me to

Sweden to compete against the top 12 players in the world. I won 18 straight games, lost

none, and took rst place, becoming the number one ranked Quake III player in the world

in the process. Two months later I followed that success by traveling to Dallas and defending

my title as the world’s best Quake III player, winning the $40,000 grand prize. From there

I entered competitions all over the world, including Singapore, Korea, Germany, Australia,

Holland and Brazil in addition to Los Angeles, New York and St. Louis.

WINNING STREAK

I was excited to showcase my true gaming skills when defending my title as CPL

Champion of the year at the CPL Winter 2001 because I would be competing in a totally

dierent rst person shooter (fps) game, Alien vs. Predator II. I won that competition and

walked away with a new car. e next year I won the same title playing Unreal Tournament

2003, becoming the only three-time CPL champion of the year. And I did it playing a

different game each year, something no one else has ever done and a feat of which I am

extremely proud.

At QuakeCon 2002, I faced o against my rival ZeRo4 in one of the most highly

anticipated matches of the year, winning in a 14 to (-1) killer victory. Competing at Quakecon

2004, I became the World’s 1st Doom3 Champion by defeating Daler in a series of very

challenging matches and earning $25,000 for the victory.

Since then Fatal1ty has traveled the globe to compete against the best in the world, winning

prizes and acclaim, including the 2005 CPL World Tour Championship in New York City for

a $150,000 rst place triumph. In August 2007, Johnathan was awarded the rst ever Lifetime

Achievement Award in the four year history of the eSports-Award for “showing exceptional

sportsmanship, taking part in shaping eSports into what it is today and for being the prime

representative of this young sport. He has become the gurehead for eSports worldwide”.

Fatal1ty Story

LIVIN’ LARGE

Since my rst big tournament wins, I have been a “Professional Cyberathlete”, traveling the

world and livin’ large with lots of International media coverage on outlets such as MTV,

ESPN and a 60 Minutes segment on CBS to name only a few. It's unreal - it's crazy. I’m living

a dream by playing video games for a living. I’ve always been athletic and took sports like

hockey and football very seriously, working out and training hard. is discipline helps me

become a better gamer and my drive to be the best has opened the doors necessary to become

a professional.

A DREAM

Now, another dream is being realized – building the ultimate gaming computer, made

up of the best parts under my own brand. Quality hardware makes a huge difference in

competitions…a couple more frames per second and everything gets really nice. It’s all about

getting the computer processing faster and allowing more uid movement around the maps.

My vision for Fatal1ty hardware is to allow gamers to focus on the game without worrying

about their equipment, something I’ve preached since I began competing. I don’t want to

worry about my equipment. I want to be there – over and done with - so I can focus on

the game. I want it to be the fastest and most stable computer equipment on the face of the

planet, so quality is what Fatal1ty Brand products represent.

Johnathan “Fatal1ty” Wendel

e Fatal1ty name, Fatal1ty logos and the Fatal1ty likeness are registered trademarks of Fatal1ty, Inc., and are used

owners.

PB

1

English

Fatal1ty E3V5 Performance Gaming/OC Series

Motherboard Layout

DDR4_A2 (64 bit, 288-pin module)

DDR4_A1 (64 bit, 288-pin module)

DDR4_B2 (64 bit, 288-pin module)

DDR4_B1 (64 bit, 288-pin module)

ATX 12V1

USB 2.0

T: USB1

B: USB2

ATXPWR1

LAN

PCIE2

Top:

RJ-45

USB 3.0

T: USB3

B: USB4

Top:

Central/Bass

Center:

REAR SPK

Top:

LINE IN

Center:

FRONT

Bottom:

Optical

SPDIF

Bottom:

MIC IN

PCIE4

HDLED RESET

PLED PWRBTN

PANEL1

1

USB3_4

1

SPK_PLED1

COM1

1

HD_AUDIO1

E3V5 Performance Gaming/OC

PCIE1

RoHS

5

6

11

10

14

21

22

SATA3 _1

1

3

2

20

Purity

Sound 3

TM

BIOS

ROM

PS2

Keybo ard

/Mous e

CMOS

Battery

CLRMOS1

1

PCIE3

4

USB3_7_8

1

13

CPU_FAN2

CPU_FAN1

CHA_FAN1

CHA_FAN4

USB1_2

1

17

1

TPMS1

PCIE5

CHA_FAN2

CHA_FAN3

PCIE_PWR1

SATA3_5

SATA3_3

SATA3_4

SATA3_2

SATA3 _0

7

8

9

12

15

16

18

19

23

Intel

C232

USB 3.0

T: USB1

B: USB2

2

3

English

No. Description

1 ATX 12V Power Connector (ATX12V1)

2 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1)

3 2 x 288-pin DDR4 DIMM Slots (DDR4_A2, DDR4_B2)

4 CPU Fan Connector (CPU_FAN1)

5 ATX Power Connector (ATXPWR1)

6 Chassis Fan Connector (CHA_FAN4)

7 USB 3.0 Header (USB3_7_8)

8 SATA3 Connectors (SATA3_0_1)

9 CPU Fan Connector (CPU_FAN2)

10 SATA3 Connectors (SATA3_3_5)

11 SATA3 Connectors (SATA3_2_4)

12 Chassis Fan Connector (CHA_FAN2)

13 Chassis Fan Connector (CHA_FAN1)

14 System Panel Header (PANEL1)

15 Clear CMOS Jumper (CLRMOS1)

16 Power LED and Speaker Header (SPK_PLED1)

17 USB 2.0 Header (USB1_2)

18 USB 2.0 Header (USB3_4)

19 Chassis Fan Connector (CHA_FAN3)

20 TPM Header (TPMS1)

21 COM Port Header (COM1)

22 Front Panel Audio Header (HD_AUDIO1)

23 PCIe Power Connector (PCIE_PWR1)

2

3

English

Fatal1ty E3V5 Performance Gaming/OC Series

1.4 I/O Panel

No. Description No. Description

1 Fatal1ty Mouse Port (USB1) 7 Front Speaker (Lime)**

2 USB 2.0 Port (USB2) 8 Microphone (Pink)

3 LAN RJ-45 Port* 9 Optical SPDIF Out Port

4 Central / Bass (Orange) 10 USB 3.0 Ports (USB3_34)

5 Rear Speaker (Black) 11 USB 3.0 Ports (USB3_12)

6 Line In (Light Blue) 12 PS/2 Mouse/Keyboard Port

CAUTION:

For operating system installation, be sure to plug your USB ash drive into the USB 2.0

Ports (USB12).

8

9

10

2

3 5

11

4

7

6

12

1

4

5

English

* ere are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.

Activity / Link LED Speed LED

Status Description Status Description

O No Link O 10Mbps connection

Blinking Data Activity Orange 100Mbps connection

On Link Green 1Gbps connection

** If you use a 2-channel speaker, please connect the speaker’s plug into “Front Speaker Jack”. See the table below

for connection details in accordance with the type of speaker you use.

Audio Output

Channels

Front Speaker

(No. 7)

Rear Speaker

(No. 5)

Central / Bass

(No. 4)

Line In

(No. 6)

2 V -- -- --

4 V V -- --

6 V V V --

8 V V V V

To enable Multi-Streaming, you need to connect a front panel audio cable to the front

panel audio header. Aer restarting your computer, you will nd the “Mixer” tool on your

system. Please select “Mixer ToolBox” , click “Enable playback multi-streaming”, and

click “ok”. Choose “2CH”, “4CH”, “6CH”, or “8CH” and then you are allowed to select

“Realtek HDA Primary output” to use the Rear Speaker, Central/Bass, and Front Speaker,

or select “Realtek HDA Audio 2nd output” to use the front panel audio.

ACT/LINK LED

SPEED LED

LAN Port

4

5

English

Fatal1ty E3V5 Performance Gaming/OC Series

Chapter 1 Introduction

ank you for purchasing ASRock Fatal1ty E3V5 Performance Gaming/OC Series

motherboard, a reliable motherboard produced under ASRock’s consistently

stringent quality control. It delivers excellent performance with robust design

conforming to ASRock’s commitment to quality and endurance.

1.1 Package Contents

• ASRock Fatal1ty E3V5 Performance Gaming/OC Series Motherboard (ATX Form

Factor)

• ASRock Fatal1ty E3V5 Performance Gaming/OC Series Quick Installation Guide

• ASRock Fatal1ty E3V5 Performance Gaming/OC Series Support CD

• 2 x Serial ATA (SATA) Data Cables (Optional)

• 1 x I/O Panel Shield

Because the motherboard specications and the BIOS soware might be updated, the

content of this documentation will be subject to change without notice. In case any modi-

cations of this documentation occur, the updated version will be available on ASRock’s

website without further notice. If you require technical support related to this mother-

board, please visit our website for specic information about the model you are using. You

may nd the latest VGA cards and CPU support list on ASRock’s website as well. ASRock

website http://www.asrock.com.

6

7

English

1.2 Specications

Platform

• ATX Form Factor

CPU

• Supports the Intel® Xeon® E3-1200 v5 Processor and 6

th

Generation Intel® Core

TM

i3/Pentium®/Celeron® Processors

(Socket 1151)

• Digi Power design

• 10 Power Phase design

• Supports Intel® Turbo Boost 2.0 Technology

• Supports ASRock BCLK Full-range Overclocking

• Supports ASRock Hyper BCLK Engine

Chipset

• Intel® C232

Memory

• Dual Channel DDR4 Memory Technology

• 4 x DDR4 DIMM Slots

• Supports DDR4 2133 non-ECC, un-buered memory

• Supports ECC UDIMM memory modules

• Max. capacity of system memory: 64GB

• Supports Intel® Extreme Memory Prole (XMP) 2.0

• 15μ Gold Contact in DIMM Slots

Expansion

Slot

• 2 x PCI Express 3.0 x16 Slots (PCIE2: x16 mode; PCIE4: x4

mode)*

* Supports NVMe SSD as boot disks

• 3 x PCI Express 3.0 x1 Slots (Flexible PCIe)

• Supports AMD Quad CrossFireX

TM

and CrossFireX

TM

• 15μ Gold Contact in VGA PCIe Slot (PCIE2)

Audio

• 7.1 CH HD Audio with Content Protection (Realtek

ALC1150 Audio Codec)

• Premium Blu-ray Audio support

• Supports Surge Protection (ASRock Full Spike Protection)

• Supports Purity Sound

TM

3

6

7

English

Fatal1ty E3V5 Performance Gaming/OC Series

- Nichicon Fine Gold Series Audio Caps

- 115dB SNR DAC with Dierential Amplier

- TI® NE5532 Premium Headset Amplier (Supports up to

600 Ohm headsets)

- Pure Power-In

- Direct Drive Technology

- PCB Isolate Shielding

• Supports DTS Connect

LAN

• Gigabit LAN 10/100/1000 Mb/s

• Giga PHY Intel® I219V

• Supports Wake-On-LAN

• Supports Lightning/ESD Protection (ASRock Full Spike

Protection)

• Supports Energy Ecient Ethernet 802.3az

• Supports PXE

Rear Panel

I/O

• 1 x PS/2 Mouse/Keyboard Port

• 1 x Optical SPDIF Out Port

• 1 x USB 2.0 Port (Supports ESD Protection (ASRock Full

Spike Protection))

• 1 x Fatal1ty Mouse Port (USB 2.0) (Supports ESD Protection

(ASRock Full Spike Protection))

• 4 x USB 3.0 Ports (Supports ESD Protection (ASRock Full

Spike Protection))

• 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED

LED)

• HD Audio Jacks: Rear Speaker / Central / Bass / Line in /

Front Speaker / Microphone

Storage

• 6 x SATA3 6.0 Gb/s Connectors, support RAID (RAID 0,

RAID 1, RAID 5, RAID 10, Intel Rapid Storage Technology

enterprise), NCQ, AHCI and Hot Plug

8

9

English

Connector

• 1 x COM Port Header

• 1 x TPM Header

• 1 x Power LED and Speaker Header

• 2 x CPU Fan Connectors (4-pin) (Smart Fan Speed Control)

• 4 x Chassis Fan Connectors (4-pin) (Smart Fan Speed Con-

trol)

* CPU_FAN1 and CHA_FAN1 can auto detect if 3-pin or

4-pin fan is in use.

* e CPU Fan Connector supports the CPU fan of maxi-

mum 1A (12W) fan power.

• 1 x 24 pin ATX Power Connector

• 1 x 8 pin 12V Power Connector

• 1 x PCIe Power Connector

• 1 x Front Panel Audio Connector

• 2 x USB 2.0 Headers (Support 4 USB 2.0 ports) (Supports

ESD Protection (ASRock Full Spike Protection))

• 1 x USB 3.0 Header (Supports 2 USB 3.0 ports) (Supports

ESD Protection (ASRock Full Spike Protection))

BIOS

Feature

• AMI UEFI Legal BIOS with multilingual GUI support

• ACPI 5.0 Compliant wake up events

• SMBIOS 2.7 Support

• CPU, GT_CPU, DRAM, VPPM, PCH 1.0V, VCCIO, VC-

CPLL, VCCSA Voltage Multi-adjustment

Hardware

Monitor

• CPU/Chassis temperature sensing

• CPU/Chassis Fan Tachometer

• CPU/Chassis Quiet Fan (Auto adjust chassis fan speed by

CPU temperature)

• CPU/Chassis Fan multi-speed control

• Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore, GT_CPU,

DRAM, VPPM, PCH 1.0V, VCCIO, VCCSA

8

9

English

Fatal1ty E3V5 Performance Gaming/OC Series

Please realize that there is a certain risk involved with overclocking, including adjusting

the setting in the BIOS, applying Untied Overclocking Technology, or using third-party

overclocking tools. Overclocking may aect your system’s stability, or even cause damage to

the components and devices of your system. It should be done at your own risk and expense.

We are not responsible for possible damage caused by overclocking.

* For detailed product information, please visit our website:

http://www.asrock.com

OS

• Microso® Windows® 10 64-bit / 8.1 64-bit / 7 32-bit / 7 64-

bit

* To install Windows® 7 OS, a modied installation disk with

xHCI drivers packed into the ISO le is required. Please refer to

page 146 for more detailed instructions.

* For the updated Windows® 10 driver, please visit ASRock’s

website for details: http://www.asrock.com.

Certica-

tions

• FCC, CE, WHQL

• ErP/EuP ready (ErP/EuP ready power supply is required)

10

11

English

is is an ATX form factor motherboard. Before you install the motherboard, study

the conguration of your chassis to ensure that the motherboard ts into it.

Pre-installation Precautions

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

• Make sure to unplug the power cord before installing or removing the motherboard

components. Failure to do so may cause physical injuries and damages to motherboard

components.

• In order to avoid damage from static electricity to the motherboard’s components,

NEVER place your motherboard directly on a carpet. Also remember to use a grounded

wrist strap or touch a safety grounded object before you handle the components.

• Hold components by the edges and do not touch the ICs.

• Whenever you uninstall any components, place them on a grounded anti-static pad or

in the bag that comes with the components.

• When placing screws to secure the motherboard to the chassis, please do not over-

tighten the screws! Doing so may damage the motherboard.

Chapter 2 Installation

10

11

English

Fatal1ty E3V5 Performance Gaming/OC Series

2.1 Installing the CPU

1. Before you insert the 1151-Pin CPU into the socket, please check if the PnP cap is on the

socket, if the CPU surface is unclean, or if there are any bent pins in the socket. Do not

force to insert the CPU into the socket if above situation is found. Otherwise, the CPU

will be seriously damaged.

2. Unplug all power cables before installing the CPU.

1

2

A

B

12

13

English

4

5

3

12

13

English

Fatal1ty E3V5 Performance Gaming/OC Series

Please save and replace the cover if the processor is removed. e cover must be placed if

you wish to return the motherboard for aer service.

14

15

English

2.2 Installing the CPU Fan and Heatsink

1 2

CPU_

FAN

14

15

English

Fatal1ty E3V5 Performance Gaming/OC Series

2.3 Installing Memory Modules (DIMM)

is motherboard provides four 288-pin DDR4 (Double Data Rate 4) DIMM slots,

and supports Dual Channel Memory Technology.

Dual Channel Memory Conguration

e DIMM only ts in one correct orientation. It will cause permanent damage to the

motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.

Priority DDR4_A1 DDR4_A2 DDR4_B1 DDR4_B2

1 Populated Populated

2 Populated Populated

3 Populated Populated Populated Populated

1. For dual channel conguration, you always need to install identical (the same brand,

speed, size and chip-type) DDR4 DIMM pairs.

2. It is unable to activate Dual Channel Memory Technology with only one or three memory

module installed.

3. It is not allowed to install a DDR, DDR2 or DDR3 memory module into a DDR4 slot;

otherwise, this motherboard and DIMM may be damaged.

16

17

English

1

2

3

La pagina si sta caricando...

ASROCK E3V5 Performance Gaming Manuale utente

ASROCK E3V5 Performance Gaming Manuale utente

in altre lingue

Documenti correlati

Altri documenti