Samsung BD-P1000 Manuale utente

AK68-01229L

Blu-ray Disc Player

User’s Manual

BLU-RAY èêéàÉêõÇÄíÖãú

àÌÒÚÛÍˆËﬂ ‰Îﬂ ÔÓÎ¸ÁÓ‚‡ÚÂÎﬂ

229L_P1000_XER_RUS-2 12/22/06 3:41 PM Page 1

Correct Disposal of This Product

(Waste Electrical &Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)

This marking shown on the product or its literature,indicates that it should not be disposed with other

household wastes at the end of its working life. To prevent possible harm to the environment or human

health from uncontrolled waste disposal,please separate this from other types of wastes and recycle it

responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product,or their local

government office,for details of where and how they can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase

contract.This product should not be mixed with other commercial wastes for disposal.

English

PyccÍËÈ

229L_P1000_XER_ENG_IB_1~38 12/22/06 4:03 PM Page 1

Getting Started

2- English

Warning

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE THE COVER(OR BACK).

NO USER-SERVICEABLE PARTS ARE INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates “dangerous voltage”

inside the product that presents a risk of

electric shock or personal injury.

This symbol indicates important instructions

accompanying the product.

Do not install this equipment in a confined space such

as a bookcase or similar unit.

WARNING : To prevent damage which may result in

fire or electric shock hazard, do not

expose this appliance to rain or moisture.

CAUTION : BLU-RAY DISC PLAYER USES AN

INVISIBLE LASER BEAM WHICH CAN

CAUSE HAZARDOUS RADIATION

EXPOSURE IF DIRECTED. BE SURE TO

OPERATE BLU-RAY DISC PLAYER

CORRECTLY AS INSTRUCTED.

CAUTION

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS OR ADJUSTMENTS OR

PERFORMANCE OF PROCEDURES OTHER THAN

THOSE SPECIFIED HEREIN MAY RESULT IN

HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR

YOURSELF. REFER SERVICING TO QUALIFIED

PERSONNEL.

This product satisfies CE regulations when shielded

cables and connectors are used to connect the unit to

other equipment. To prevent electromagnetic

interference with electric appliances, such as radios

and televisions, use shielded cables and connectors

for connections.

IMPORTANT NOTE

The mains lead on this equipment is supplied with a

moulded plug incorporating a fuse. The value of the

fuse is indicated on the pin face of the plug.

If it requires replacing, a fuse approved to BS1362 of

the same rating must be used.

Never use the plug with the fuse cover omitted if the

cover is detachable. If a replacement fuse cover is

required, it must be of the same colour as the pin face

of the plug. Replacement covers are available from

your dealer.

If the fitted plug is not suitable for the power points in

your house or the cable is not long enough to reach a

power point, you should obtain a suitable safety

approved extension lead or consult your dealer for

assistance.

However, if there is no alternative to cutting off the

plug, remove the fuse and then safely dispose of the

plug. Do not connect the plug to a mains jack, as

there is a risk of shock hazard from the bared flexible

cord.

To disconnect the apparatus from the mains, the plug

must be pulled out from the mains socket, therefore

the mains plug shall be readily operable.

The product unit accompanying this user manual is

licenced under certain intellectual property rights of

certain third parties. This licence is limited to private

non-commercial use by end-user consumers for

licenced contents.

No rights are granted for commercial use.

The licence does not cover any product unit other

than this product unit and the licence does not extend

to any unlicenced product unit or process conforming

to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold

in combination with this product unit. The licence only

covers the use of this product unit to encode and/or

decode audio files conforming to the ISO/IEC 11172-3

or ISO/IEC 13818-3. No rights are granted under this

licence for product features or functions that do not

conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.

229L_P1000_XER_ENG_IB_1~38 12/22/06 4:03 PM Page 2

Getting Started

English - 3

English

Important Safety Instructions

Read these operating instructions carefully before using

the unit. Follow all the safety instructions listed below.

Keep these operating instructions handy for future

reference.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings, Install in

accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as

radiators, heat registers, or other apparatus

(including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or

grounding- type plug. A polarized plug has two

blades with one wider than the other. A grounding

type plug has two blades and a third grounding

prong. The wide blade or the third prong are

provided for your safety. If the provided plug does

not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10) Protect the power cord from being walked on or

pinched particularly at plugs, convenience

receptacles, and the point where they exit from the

apparatus.

11) Only use attachments/accessories specified by

the manufacturer.

12) Use only with cart, stand, tripod, bracket, or table

specified by the manufacturer, or sold with the

apparatus.

13) Unplug this apparatus. When a cart is used,

use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

14) Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus the apparatus has

been exposed to rain or moisture, does not operate

normally, or has been dropped.

Precautions

Handling Cautions

• Before connecting other components to this Blu-ray

disc player, be sure to turn them all off.

• Do not move the Blu-ray disc player while a disc is

being played, or the disc may be scratched or broken,

the Blu-ray disc player internal parts may be

damaged.

• Do not put a flower vase filled with water or any small

metal objects on the Blu-ray disc player.

• Be careful not to put your hand into the disc tray.

• Do not place anything other than the disc in the disc

tray.

• Exterior interference such as lightning and static

electricity can affect normal operation of this Blu-ray

disc player. If this occurs, turn the Blu-ray disc player

off and on again with the POWER button, or

disconnect and then reconnect the AC power cord to

the AC power outlet. The Blu-ray disc player will

operate normally.

• Be sure to remove the disc and turn off the Blu-ray

disc player after use.

• Disconnect the AC power cord from the AC outlet

when you don’t intend to use the Blu-ray disc player

for long periods of time.

• Clean the disc by wiping in a straight line from the

inside to the outside of the disc.

Maintenance of Cabinet

For safety reasons, be sure to disconnect the AC power

cord from the AC outlet.

• Do not use benzene, thinner, or other solvents for

cleaning.

• Wipe the cabinet with a soft cloth.

Restrictions on Playback

•

This player may not respond to all operating commands

because some BD, DVD or CD discs allow specific or

limited operation and feature during playback.

Please note that this is not a defect in the player.

• Samsung cannot assure that this player will play every

disc bearing the BD, DVD and CD logos because disc

formats may evolve, and problems and errors can

occur during the creation of BD, DVD and CD

software and/or the manufacture of discs.

This player also operates differently than a standard

DVD player or other AV equipment. Please contact

SAMSUNG customer care center if you have

questions or encounter difficulty in playing BD, DVD or

CD discs in this player. Also, refer to the rest of this

Manual for additional information on playback

restrictions.

229L_P1000_XER_ENG_IB_1~38 12/22/06 4:03 PM Page 3

3 4 5 6 7 8 9 10 11 12 13 14 15

PLAY MOVIE LANGUAGES SCENE SELECTIONS PREVIEWS

Getting Started

4- English

General Features

Player Features

Digital Photo Viewer (JPEG)

You can enjoy digital photos on your TV.

MP3 Playback

This unit can play mp3 files from CD-R/-RW, DVD-R/-

RW/-RAM, Memory Cards.

HDMI (High Definition Multimedia

Interface)

HDMI reduces picture noise by allowing a pure digital

video/audio signal path from the player to your TV.

Memory card capability

Compatible with 10 types of popular memory cards:

Compact Flash, Micro Drive, Memory Stick, Memory

Stick PRO, Memory Stick Duo, Memory Stick Pro

Duo, Secure Digital, Multi Media, Mini SD, RS MMC.

HD Video

Graphic

Planes

Blu-ray Disc Features

Blu-ray Discs can store 25 GB (single layer) or 50 GB

(dual layer) on a single sided disc - about 5 to 10

times the capacity of a DVD.

Blu-ray Discs also support the highest quality HD

video available in the industry (up to 1920 x 1080 at

40 Mbit/sec) - Large capacity means no compromise

on video quality. Furthermore, a Blu-ray Disc has the

same familiar size and look as DVD.

* The following Blu-ray Disc features are disc

dependant and will vary.

Appearance and navigation of features will also vary

from disc to disc.

Not all discs will have the features described below.

Video highlights

The BD-ROM format for movie distribution supports

three highly advanced video codecs, including

MPEG2.

HD video resolutions are also available:

- 1920 x 1080 HD

- 1280 x 720 HD

For High-Definition Playback

To view high-definition contents in BD discs, an

HDTV is required. Some discs may require HDMI

OUT for viewing of high-definition contents. Ability to

view high-definition contents in BD discs may be

limited depending on the resolution of your TV.

Graphic planes

Two individual, full HD resolution (1920x1080) graphic

planes (layers) are available, on top of the HD video

layer. One plane is assigned to video-related, frame

accurate graphics (like subtitles), and the other plane

is assigned

to interactive graphic elements, such as buttons or

menus.

For both planes, various wipes, fades and scroll

effects may be available.

Menu graphics

Support 256 color full resolution graphics and

animation, thereby greatly surpassing the capabilities

of DVD-Video. Options can be accessed and

removed during video playback.

229L_P1000_XER_ENG_IB_1~38 12/22/06 4:03 PM Page 4

PLAY MOVIE LANGUAGES SCENE SELECTIONS PREVIEWS

Getting Started

English - 5

English

Before Reading the

User’s Manual

Make sure to check the following terms before reading the

user manual.

Icons that will be used in manual

1) Be sure to be familiar with Safety Instructions before

using this product. (See pages 2~3)

2) If a problem occurs, check the Troubleshooting.

(See pages 46~47)

reproduced or copied without the prior written permission of

Samsung Electronics Co.,Ltd.

Copyright

About the use of this user’s manual

Icon Term Definition

BD-ROM

This involves a function available

on the BD-ROM.

This involves a function available

DVD-VIDEO

on DVD-Video or DVD-R/DVD-RW

discs that have been recorded

and finalized in Video Mode.

DVD-

This involves a function available on

RAM

DVD-RAM.(VR mode, Standard Version 2.0 only)

DVD-

This involves a function available on

RW

DVD-RW.(VR mode, or V mode and finalized only)

DVD-

This involves a function available on

R

DVD

-R.(V mode and finalized only)

Audio CD

This involves a function available

on a data CD (CD-R or CD-RW).

This involves a function available

JPEG on CD-R/-RW, DVD-R/-RW/

-RAM discs or memory card.

This involves a function available

MP3

on CD-R/-RW, DVD-R/-RW/

-RAM discs or memory card.

Memory This involves a function available

Card on the Memory Card.

This involves a case where a

Caution function does not operate or

settings may be cancelled.

Note

This involves tips or instructions on the

page that help each function operate.

One-Touch

A function that can be operated

button by using only one button.

Menu sounds

When you highlight or select a menu option, sounds

can be heard such as button clicks or a voice-over

explaining the highlighted menu choice.

Multi-page/PopUp Menus

With DVD-Video, playback is interrupted each time a

new menu screen is accessed. Due to Blu-ray Disc's

ability to

preload

data from the disc without

interrupting playback, a menu can consist of several

pages.

You can browse through the menu pages or select

different menu paths, while the audio and video

remain playing in the background.

Interactivity

Certain Blu-ray Discs may contain Animated menus

and Trivia games.

User Browsable Slideshows

With Blu-ray Discs, you can browse through various

still pictures while the audio remains playing.

Subtitles

Depending on what is contained on the Blu-ray Disc,

you may be able to select different font styles, sizes

and colors for the subtitles, Subtitles may also be

animated, scrolled or faded in and out.

229L_P1000_XER_ENG_IB_1~38 12/22/06 4:03 PM Page 5

Getting Started

6- English

Contents

Getting Started

Warning ....................................................................2

Precautions...............................................................3

Important Safety Instructions.................................3

Handling Cautions..................................................3

Maintenance of Cabinet.........................................3

General Features......................................................4

Before Reading the User’s Manual.......................5

Disc Type and Characteristics...............................8

Disc Storage & Management...............................11

Description..............................................................12

Front Panel ..........................................................12

Rear Panel ..........................................................13

Front Panel Display .............................................13

Tour of the Remote Control.................................14

Unpacking...............................................................15

Connections

Quick Overview........................................................17

TV Output Selection Feature .................................18

Choosing a Connection..........................................18

Playback

Before Playing..........................................................24

Playing a Disc...........................................................25

Using the Search & Skip Functions.....................26

Slow Motion Play/Step Motion Play......................26

Using the Scene Search Function........................27

Using the Display Function....................................28

Using the Disc Menu & Popup/Title Menu ..........28

Repeat Play...............................................................29

Selecting the Audio Language..............................30

Selecting the Subtitle Language...........................30

Changing the Camera Angle..................................31

Using the Bookmark Function ..............................31

Playing an Audio CD/ MP3.....................................33

Viewing a Picture.....................................................35

Using a Mixed disc (JPEG+MP3) ..........................38

229L_P1000_XER_ENG_IB_1~38 12/22/06 4:03 PM Page 6

Getting Started

English - 7

English

System Setup

On-Screen Menu Navigation..................................39

Setting up the Language Options.........................40

Setting up the Audio Options................................40

Setting up the Speaker Options............................41

Setting up the Video display/output Options......42

Setting up the Parental Lock.................................44

Reference

Troubleshooting.......................................................46

Specifications ..........................................................48

229L_P1000_XER_ENG_IB_1~38 12/22/06 4:03 PM Page 7

Getting Started

8- English

Disc Type and

Characteristics

BD-ROM

AUDIO + VIDEO

Single sided

(25GB/50GB)

Single sided(12 cm)

240

DVD-VIDEO AUDIO + VIDEO

Double sided(12 cm)

480

Single sided(8 cm)

80

Double sided(8 cm)

160

AUDIO-CD AUDIO

Single sided(12 cm)

74

Single sided(8 cm)

20

Single-sided 480

DVD-RAM

12 cm (4.7GB)

(EX : Extended Play)

AUDIO + VIDEO

Double-sided 960

12 cm (9.4GB)

(EX : Extended Play)

DVD-RW

AUDIO + VIDEO

12 cm (4.7GB)

480

(EX : Extended Play)

DVD-R

AUDIO + VIDEO

12 cm (4.7GB)

480

(EX : Extended Play)

CD-R/-RW

JPEG

DVD-RAM/

MP3

--

-RW/-R

Max. Playing

minute

Disc ShapeRecorded contentDisc LogoDisc Types

Disc types that can be played

Logos of Discs that can be played

Dolby Digital

DTS

Digital Audio

Stereo

MP3

Java

PAL broadcast system

in U.K, France,

Germany, etc.

Blu-ray Disc

Do not use the following discs!

• HD DVD discs cannot be played on this product.

• BD-R/-RE discs cannot be played on this product.

•

This product is not for playback of DVD+R and DVD+RW discs.

• LD, CD-G, CD-I, CD-ROM, DVD-ROM and illegally

recorded discs should not be used in this product.

[Note]

Disc types that can be played : BD-ROM, DVD-Video,

DVD-RAM/-RW/-R, CD, CD-RW/-R.

DVD-RW/-R discs that have been recorded in Video Mode

(V mode) on other components can play only when finalized.

•

Some commercial discs and DVD discs purchased outside

your region may not be playable with this product. When

these discs are played, either “No disc.” or “Please check

the regional code of the disc.” will be displayed.

• If a DVD-R/-RW/-RAM disc has not been recorded

properly in DVD video format, it will not be playable.

Region code

Both the Blu-ray disc player and the discs are coded by

region. These regional codes must match in order to play the

disc. If the codes do not match, the disc will not play.

The Region Number for this Blu-ray disc player is described

on the rear panel of the Blu-ray disc player.

Discs that cannot be played

• HD DVD discs • BD-R/-RE discs

• DVD-Video with a region number other than “5” or “ALL”

• 12 cm 2.6 GB and 5.2 GB DVD-RAM

• 3.9 GB DVD-R Disc for Authoring.

• DVD-RAM/-RW(VR mode) not recorded following the

Video Recording Standard

• DVD-ROM/PD/MV-Disc, etc

• CVD/CD-ROM/CDV/CD-G/CD-I

Blu-ray Disc Compatibility

Blu-ray Disc is a new and evolving format. Accordingly, disc

compatibility issues with new and existing format discs are possible.

Not all discs are compatible and not every disc will playback.

For additional information, also refer to the Compliance and

Compatibility Notice section of this Manual. If you encounter

compatibility problems, please contact SAMSUNG customer care center.

Samsung Blu-ray disc player (BD-P1000) supports only

BD-ROM Profile 1 version 1.0 specification.

In case of playing discs which has later version, you may

need to update player's firmware.

Please refer to http://www.samsung.com or contact

SAMSUNG customer care center.

Disc Type

Blu-ray

DVD-Video

Region

code

Region C

(VR mode,

Standard

Version 2.0

only)

(VR mode, or

V mode and

finalized only)

(V mode

and finalized

only)

■

This Blu-ray disc player supports discs that are

compatible with DVD-RAM Standard Version 2.0.

■

Playback may not work for some types of discs, or when

specific operations, such as angle change and aspect ratio

adjustment, are being performed. Information about the discs

is written in detail on the box. Please refer to this if necessary.

■

Do not allow the disc to become dirty or scratched.

Finger prints, dirt, dust, scratches or deposits of

cigarette smoke on the recording surface may make

it impossible to use the disc for playback.

NOTE

229L_P1000_XER_ENG_IB_1~38 12/22/06 4:03 PM Page 8

Getting Started

English - 9

English

Disc Type

•

Because AACS (Advanced Access Content System)

is approved as content protection system for BD

format, similar to use of CSS (Content Scramble

System) for DVD format, certain restrictions are

imposed on playback, analog signal output, etc., of

AACS protected contents. The operation of this

product and restrictions on this product may vary

depending on your time of purchase as those

restrictions may be adopted and/or changed by

AACS after the production of this product.

Furthermore, BD-ROM Mark and BD+ are

additionally used as content protection system for BD

format, which imposes certain restrictions including

playback restrictions for BD-ROM Mark and/or BD+

protected contents. To obtain additional information

on AACS, BD-ROM Mark, BD+, or this product,

please contact SAMSUNG customer care center.

•

Many BD/DVD discs are encoded with copy

protection. Because of this, you should only connect

your Blu-ray disc player directly to your TV, not to a

VCR. Connecting to a VCR results in a distorted

picture from copy-protected BD/DVD discs.

• This product incorporates copyright protection

technology that is protected by methods claims of

certain U.S. patents and other intellectual

property rights owned by Macrovision Corporation

and other rights owners. Use of this copyright

protection technology must be authorized by

Macrovision Corporation and is intended for

home and other limited viewing uses only, unless

otherwise authorized by Macrovision Corporation.

Reverse engineering or disassembly is prohibited.

•

Under the U.S. Copyright laws and Copyright laws of

other countries, unauthorized recording, use, display,

distribution, or revision of television programs,

videotapes, BDs, DVDs, CDs and other materials

may subject you to civil and/or criminal liability.

• PROGRESSIVE SCAN OUTPUTS (525p/625p)

“CONSUMERS SHOULD NOTE THAT NOT ALL

HIGH DEFINITION TELEVISION SETS ARE

FULLY COMPATIBLE WITH THIS PRODUCT

AND MAY CAUSE ARTIFACTS TO BE

DISPLAYED IN THE PICTURE, IN CASE OF 525

OR 625 PROGRESSIVE SCAN PICTURE

PROBLEMS, IT IS RECOMMENDED THAT THE

USER SWITCH THE CONNECTION TO THE

‘STANDARD DEFINITION’ OUTPUT. IF THERE

ARE QUESTIONS REGARDING YOUR TV SET

COMPATIBILITY WITH THIS MODEL 525p AND

625p DVD PLAYER, PLEASE CONTACT

SAMSUNG'S CUSTOMER SERVICE CENTER.”

COPY PROTECTION

BD-ROM

Blu-ray Disc Read Only Memory. A BD-ROM disc

contains pre-recorded data. Although a BD-ROM may

contain any form of data, most BD-ROM discs will

contain movies in High Definition format, for playback

on Blu-ray disc players. This unit can play back

pre-recorded commercial BD-ROM discs with movies.

DVD-Video

• A digital versatile disc (DVD) can contain up to

135-minutes of images, 8 audio languages and 32

subtitle languages. It is equipped with MPEG2 picture

compression and Dolby Digital surround, allowing you

to enjoy vivid and clear theatre quality images in the

comfort of your own home.

• When switching from the first layer to the second layer

of a dual-layered DVD Video disc, there may be

momentary distortion in the image and sound.

This is not a malfunction of the unit.

• Once a DVD-RW/-R recorded in Video Mode is

finalized, it becomes DVD-Video. Pre-recorded

(pre-stamped) commercial DVDs with movies are also

referred to as DVD-Videos. This unit can play back

pre-recorded commercial DVD discs (DVD-Video

discs) with movies.

• An audio disc on which 44.1kHz PCM Audio is

recorded.

• This unit can play back CD-DA format audio CD-R

and CD-RW discs.

• The unit may not be able to play some CD-R or

CD-RW discs due to the condition of the recording.

Audio CD

• Use a 700MB(80 minutes) CD-R/-RW disc.

If possible, do not use a 800MB(90 minutes) or above

disc, as the disc may not play back.

• If the CD-R/-RW disc was not recorded as a closed

session, you may experience a delay in the early

playback time, all recorded files may not play.

• Some CD-R/-RW discs may not be playable with this

unit, depending on the device which was used to burn

them. For contents recorded on CD-R/-RW media

from CDs for your personal use, playability may vary

depending on contents and discs.

CD-R/-RW

229L_P1000_XER_ENG_IB_1~38 12/22/06 4:03 PM Page 9

Getting Started

10 - English

• Playback can be performed with DVD-RW discs in

both the Video and VR Modes.

• Once a DVD-RW recorded in Video Mode is finalized,

it becomes DVD-Video. Ability to play back may

depend on recording conditions.

• You cannot play a DVD-RAM in most DVD

components due to compatibility issues.

• Only DVD-RAM standard Version 2.0. discs can be

played in this unit.

• For cartridge type DVD-RAM discs, remove the

cartridge and use the disc only.

DVD-RW Disc Playback

DVD-RAM Disc Playback

• CD-R/-RW, DVD-RAM/-RW/-R recorded with UDF,

ISO9660 or JOLIET format can be played back.

• Only JPEG files with the ".jpg", ".JPG", ".jpeg" or

"JPEG" extension can be displayed.

• Progressive JPEG is supported.

• Once a DVD-R recorded in Video Mode is finalized,

it becomes DVD-Video.

• Playback may be impossible in some cases due to the

condition of recording.

• This unit can play back DVD-R discs recorded and

finalized with a Samsung DVD video recorder. It may

not be able to play some DVD-R discs depending on

the disc and the condition of the recording.

DVD-R Disc Playback

• This is a format that is used for recording data on a

DVD-RW or DVD-R disc. The disc can be played by

this Blu-ray disc player once it has been finalized.

• If a disc that has been recorded in Video Mode by a

different maker’s recorder but has not been finalized,

it cannot be played by this Blu-ray disc player.

Compliance and Compatibility Notice

NOT ALL discs are compatible

•

Subject to the restrictions described below and those

noted throughout this Manual, including the Disc Type

and Characteristics section of this Manual, disc types that

can be played are: pre-recorded commercial BD-ROM,

DVD-Video, and Audio CD discs; DVD-RAM, and

DVD-RW / DVD-R discs; and CD-RW / CD-R discs.

•

Discs other than the above cannot and/or is not intended

to be played by this player. And some of the above discs

may not play due to one or more reasons provided below.

• HD DVD discs cannot be played on this product.

• BD-R/-RE discs cannot be played on this product.

•

Samsung cannot assure that this player will play every

disc bearing the BD-ROM, DVD-Video, DVD-RAM,

DVD-RW / DVD-R and CD-RW / CD-R logos, and this

player may not respond to all operating commands or

operate all features of every disc. These and other disc

compatibility and player operation issues with new and

existing format discs are possible because:

- BD format is a new and evolving format and this player may

not operate all features of BD discs because some features

may be optional, additional features may have been added to

the BD format after the production of this player, and certain

available features may be subject to delayed availability;

- not all new and existing disc format versions are supported by

this player;

- new and existing disc formats may be revised, changed,

updated, improved and/or supplemented;

- some discs are produced in a manner that allows specific or

limited operation and feature during playback;

- some features may be optional, additional features may have

been added after the production of this player or certain

available features may be subject to delayed availability;

- some discs bearing the BD-ROM, DVD-Video, DVD-RAM,

DVD-RW / DVD-R and CD-RW / CD-R logos may still be non-

standardized discs;

- some discs may not be played depending on their physical

state or recording conditions;

- problems and error can occur during the creation of BD, DVD

and CD software and/or the manufacture of discs;

- this player operates differently than a standard DVD player or

other AV equipment; and/or

-

for reasons noted throughout this Manual and for other reason(s)

discovered and posted by SAMSUNG customer care center.

Using JPEG disc

Disc Format

• CD-R/-RW, DVD-RAM/-RW/-R recorded with UDF,

ISO9660 or JOLIET format can be played back.

• Only MP3 files with the “.mp3” or “.MP3” extension

can be played.

• Playable bit-rate range is from 56 Kbps to 320 Kbps.

•

Playable sample-rate is only 32 KHz, 44.1 KHz and

48 KHz.

• The unit can handle a maximum of 1500 files and

folders under a parent folder.

For MP3 files recorded with a VBR(Variable Bit

Rates), the sound may cut in and out.

Using MP3 disc

DVD-RW/-R (V)

• This is a format that is used for recording data on a

DVD-RAM/-RW disc.

DVD-RAM/-RW (VR)

229L_P1000_XER_ENG_IB_1~38 12/22/06 4:03 PM Page 10

Getting Started

English - 11

English

Cautions on handling discs

• Do not write on the printed side with a

ball-point pen or pencil.

• Do not use record cleaning sprays or

antistatic.

Also, do not use volatile chemicals, such

as benzene or thinner.

• Do not apply labels or stickers to discs. (Do not use

discs fixed with exposed tape adhesive or leftover

peeled-off stickers.)

• Do not use scratch-proof protectors or covers.

• Do not use discs printed with label printers available

on the market.

• Do not load warped or cracked discs.

Disc Storage

Be careful not to harm the disc because the data on

these discs is highly vulnerable to the environment.

• Do not keep under direct sunlight.

• Keep in a cool ventilated area.

• Store vertically.

• Keep in a clean protection jacket.

• If you move your Blu-ray disc player suddenly from a

cold place to a warm place, condensation may

generate on the operating parts and lens and cause

abnormal disc playback. If this occurs, do not connect

the plug to the power outlet and wait for two hours.

Then insert the disc and try to play back again.

Disc Handling

• Use discs with regular shapes.

If an irregular disc (a disc with

a special shape) is used, this

Blu-ray disc player may be

damaged.

Holding discs

• Avoid touching the surface of a disc

where recording is performed.

Blu-ray Discs

• If the product is not used for a period of time, remove the

Blu-ray Disc from the product and store it in its case.

• Be careful not to leave fingerprints or scratches on the

surface of the Blu-ray Disc.

DVD-RAM, DVD-RW and DVD-R

• Clean with an optional DVD-RAM/PD disc cleaner

(LF-K200DCA1 where available). Do not use cleaners or

cloths for CDs to clean DVD-RAM/-RW/-R discs.

DVD-Video, Audio-CD

• Wipe off dirt or contamination on the disc with a soft cloth.

•

If you encounter disc compatibility or player operation

problems, please contact SAMSUNG customer care

center. You may also contact SAMSUNG customer care

center for possible updates on this player.

•

For additional information on playback restrictions and disc

compatibility, refer to the Precautions, Before Reading the

User’s Manual, Disc Types and Characteristics, and Before

Playing sections of this Manual.

Disc Storage &

Management

229L_P1000_XER_ENG_IB_1~38 12/22/06 4:03 PM Page 11

Getting Started

12 - English

1. POWER BUTTON

Turns the Blu-ray disc player on and off.

2. STANDBY INDICATOR

When the unit is first plugged in,

this indicator lights.

3. DISC TRAY

Opens to accept a disc.

4. OPEN/CLOSE BUTTON

Opens and closes the disc tray.

5. DISPLAY

Displays the playing status, time, etc.

6. SEARCH/SKIP BUTTONS

Goes to the next title/chapter/track or goes

back to the previous title/chapter/track.

7. PLAY/PAUSE BUTTON

Plays a disc or pauses playback.

8. STOP BUTTON

Stops disc playback.

9. TV OUT SELECT BUTTON

Choose video output from HDMI or

COMPONENT or VIDEO/S-VIDEO.

10. VIDEO OUT INDICATORS

- HDMI INDICATOR : Lights when HDMI

OUT mode is selected.

- COMP INDICATOR : Lights when

COMPONENT OUT mode is selected.

- VIDEO INDICATOR : Lights when VIDEO or

S-VIDEO OUT mode is selected.

11. Remote Control Sensor

12. MEMORY CARD SLOT

Insert a memory card here.

Front Panel

Description

229L_P1000_XER_ENG_IB_1~38 12/22/06 4:03 PM Page 12

Getting Started

English - 13

English

Rear Panel

1. 5.1CH ANALOG AUDIO OUT

Connect to a 5.1CH analog input on an

A/V amplifier

2. AUDIO OUT

Connects to the audio input of external

equipment using audio cables.

3. VIDEO OUT

Connects the input of external equipment using a

video cable.

4. S-VIDEO OUT

Connects the input of external equipment using

an S-Video cable.

5. COMPONENT VIDEO OUT

Connects to equipment having Component

video input.

6. HDMI OUT

Use the HDMI cable, connect this HDMI output

terminal to the HDMI input terminal on your TV

for the best quality picture.

7. DIGITAL AUDIO OUT(COAXIAL)

Connects to an amplifier having a digital coaxial

audio input jack.

8. DIGITAL AUDIO OUT(OPTICAL)

Connects to an amplifier having a digital optical

audio input jack.

Fan

The fan always revolves when the power is on.

Ensure a minimum of 10cm of clear space on all

sides of the fan when installing the product.

Front Panel Display

1. Title/PlayList/Track indicator

2. Playing time/clock/current status indicator

3. Playback indicator

4. Pause indicator

5. Video output resolution indicator

6. Disc type indicators.

7. Memory card indicator.

229L_P1000_XER_ENG_IB_1~38 12/22/06 4:03 PM Page 13

OPEN/CLOSE

TV

STANDBY/ON

INPUT SEL. SCENE SEARCH

PLAYSTOP

TV MUTE

VOL

MENU

DISC MENU

AUDIO

MARKER

POPUP MENU

TITLE MENU

REPEAT

CANCEL

REPEAT

INFO

SUBTITLE

ZOOM

RETURN

OK

PROG

STANDBY/ON

Getting Started

Tour of the Remote Control

11. INFO Button

This will display current setting or disc status.

12. COLOR Button : RED(A), GREEN (B), YELLOW(C),

BLUE(D)

Allows access to common functions of the Blu-ray disc

player.

13. AUDIO Button

Use this to access various audio functions on a disc

(BD/DVD).

14. MARKER Button

Use this to bookmark a position while playing a disc.

15. SUBTITLE Button

Press this to switch the BD/DVD’s subtitle language.

16. OPEN/CLOSE Button

To open and close the disc tray.

17. TV STANDBY/ON Button

18. INPUT SEL. Button

Select among input terminals of TV.

19. REVERSE/FORWARD STEP Buttons

Each time this button is pressed, a new frame will

appear.

20. PLAY/PAUSE Button

Press to play/pause a disc.

21. PROG Button

Use this to select a TV program.

22. TV MUTE Button

Mutes the speakers of your TV.

23. RETURN Button

24. POPUP MENU/TITLE MENU Button

Use this to enter the popup menu/title menu.

25. CANCEL Button

26. REPEAT A-B Button

Allows you to repeat playback of the A-B section.

27. ZOOM Button

Enlarge JPEG Picture.

28. REPEAT Button

Allows you to repeat a title, chapter, track or disc.

1. STANDBY/ON Button

2. NUMBER Buttons

3. SCENE SEARCH Button

Easily search for desired scenes during playback with

search categories such as Actor and Character.

4. REVERSE/FORWARD SKIP Buttons

Press to skip backwards or forwards.

5. REVERSE/FORWARD SEARCH Buttons

Press to search a disc backwards or forwards.

6. STOP Button

Press to stop a disc.

7. VOL Button

TV volume adjustment

8. MENU Button

Brings up the Blu-ray disc player’s setup menu.

9. OK/DIRECTION Buttons (…†œ √ Buttons)

10. DISC MENU Button

Use this to enter the disc menu.

17

16

18

4

20

21

22

23

26

27

28

25

24

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

19

14 - English

229L_P1000_XER_ENG_IB_1~38 12/22/06 4:03 PM Page 14

Getting Started

English - 15

English

Unpacking

Accessories

Check for the supplied accessories below.

Preparing the Remote Control

Install Batteries in the Remote Control

• Open the battery cover on the back of the remote control.

• Insert two AAA batteries. Make sure that the polarities

(+ and -) are aligned correctly.

• Close the battery cover.

If the remote does not operate properly:

• Check the polarity + - of the batteries (Dry-Cell)

• Check if the batteries are drained.

•

Check if remote sensor is blocked by obstacles.

• Check if there is any fluorescent lighting nearby.

Dispose of batteries according to local environmental

regulations. Do not put them in the household trash.

Component Cable

HDMI Cable

Composite (Video),

Audio L/R Cable

Batteries for Remote

Control (AAA Size)

Remote Control

Instruction Manual

Quick Guide

Setting the Remote Control

You can control certain functions of another

manufacturer’s TV with this remote control.

Control function buttons include: TV STANDBY/ON,

PROG , VOL + -, TV MUTE, INPUT SEL. button.

To determine whether your television is

compatible, follow the instructions below.

1. Switch your television on.

2. Point the remote control towards the television.

3.

Press and hold the TV STANDBY/ON button and

enter the two-figure code corresponding to the

brand of your television, by pressing the

appropriate number buttons.

Result: If your television is compatible with the remote

control, it will switch off.

It is now programmed to operate with the

remote control.

■

If several codes are indicated for your

television brand, try each one in turn until

you find one that works.

■

If you replace the remote control's batteries,

you must set the brand code again.

NOTE

Then you can control the television using the following

buttons after pressing the TV button.

Button Function

TV STANDBY/ON Used to switch the television on and off.

INPUT SEL. Used to select an external source.

VOL (+

-

) Used to adjust the volume of the television.

PROG ( ) Used to select the desired channel.

TV MUTE Used to toggle the sound on and off.

■

The functions listed above will not necessarily

work on all televisions. If you encounter

problems, operate the television directly.

NOTE

229L_P1000_XER_ENG_IB_1~38 12/22/06 4:03 PM Page 15

SAMSUNG

AIWA

ANAM

BANG & OLUFSEN

BLAUPUNKT

BRANDT

BRIONVEGA

CGE

CONTINENTAL EDISON

DAEWOO

EMERSON

FERGUSON

FINLUX

FORMENTI

FUJITSU

GRADIENTE

GRUNDIG

HITACHI

IMPERIAL

JVC

LG

LOEWE

LOEWE OPTA

MAGNAVOX

METZ

MITSUBISHI

MIVAR

NEC

NEWSAN

NOBLEX

NOKIA

NORDMENDE

PANASONIC

PHILIPS

PHONOLA

PIONEER

RADIOLA

RADIOMARELLI

RCA

REX

SABA

SALORA

SANYO

SCHNEIDER

SELECO

SHARP

SIEMENS

SINGER

SINUDYNE

SONY

TELEAVA

TELEFUNKEN

THOMSON

THOMSON ASIA

TOSHIBA

WEGA

YOKO

ZENITH

TV STANDBY/ON+01, +02, +03, +04, +05, +06, +07, +08, +09

TV STANDBY/ON+82

TV STANDBY/ON+10, +11, +12, +13, +14, +15, +16, +17, +18

TV STANDBY/ON+57

TV STANDBY/ON+71

TV STANDBY/ON+73

TV STANDBY/ON+57

TV STANDBY/ON+52

TV STANDBY/ON+75

TV STANDBY/ON+19, +20, +23, +24, +25, +26, +27, +28, +29, +30, +31, +32, +33, +34

TV STANDBY/ON+64

TV STANDBY/ON+73

TV STANDBY/ON+06, +49, +57

TV STANDBY/ON+57

TV STANDBY/ON+84

TV STANDBY/ON+70

TV STANDBY/ON+49, +52, +71

TV STANDBY/ON+60, +72, +73, +75

TV STANDBY/ON+52

TV STANDBY/ON+61, +79

TV STANDBY/ON+06, +19, +20, +21, +22, +78

TV STANDBY/ON+06, +69

TV STANDBY/ON+06, +57

TV STANDBY/ON+40

TV STANDBY/ON+57

TV STANDBY/ON+06, +48, +62, +65

TV STANDBY/ON+52, +77

TV STANDBY/ON+83

TV STANDBY/ON+68

TV STANDBY/ON+66

TV STANDBY/ON+74

TV STANDBY/ON+72, +73, +75

TV STANDBY/ON+53, +54, +74, +75

TV STANDBY/ON+06, +55, +56, +57

TV STANDBY/ON+06, +56, +57

TV STANDBY/ON+58, +59, +73, +74

TV STANDBY/ON+06, +56

TV STANDBY/ON+57

TV STANDBY/ON+45, +46

TV STANDBY/ON+74

TV STANDBY/ON+57, +72, +73, +74, +75

TV STANDBY/ON+74

TV STANDBY/ON+41, +42, +43, +44, +48

TV STANDBY/ON+06

TV STANDBY/ON+74

TV STANDBY/ON+36, +37, +38, +39, +48

TV STANDBY/ON+71

TV STANDBY/ON+57

TV STANDBY/ON+35, +48

TV STANDBY/ON+73

TV STANDBY/ON+67, +73, +75, +76

TV STANDBY/ON+72, +73, +75

TV STANDBY/ON+80, +81

TV STANDBY/ON+47, +48, +49, +50, +51, +52

TV STANDBY/ON+57

TV STANDBY/ON+06

TV STANDBY/ON+63

Getting Started

16 - English

Brand

Code

Controllable TV Codes

229L_P1000_XER_ENG_IB_1~38 12/22/06 4:03 PM Page 16

English - 17

Connections

English

Connections

This section involves various methods of

connecting the Blu-ray disc player to other

external components.

Quick Overview

A Quick Overview presented in this guide will give you

enough information to start using the Blu-ray disc player.

Connecting to a TV(Video)

Connecting to a TV (S-Video)

Connecting to an Audio System

(2 Channel Amplifier)

†

Connecting to a TV (Component)

†

Connecting to a TV with DVI Jack

†

Connecting to a TV with HDMI Jack

†

Connecting to an Audio System

(5.1 Channel Amplifier)

†

Connecting to an Audio System

(Dolby Digital, MPEG2 or DTS Amplifier)

†

Connecting to an Audio System

(HDMI supported Amplifier)

Quick Overview . . . . . . . . . . . . . . . . . . . . . . . . . .17

TV Output Selection Feature . . . . . . . . . . . . . . . .18

Choosing a Connection . . . . . . . . . . . . . . . . . . . .18

Before Connecting the Blu-ray disc player

■

Always turn off the Blu-ray disc player, TV and

other components before you connect or

disconnect any cables.

■

Refer to the user’s manual of additional

components (such as a TV) you are connecting

for more information on those particular

components.

229L_P1000_XER_ENG_IB_1~38 12/22/06 4:03 PM Page 17

18 - English

Connections

Choosing a Connection

The following shows examples of connections commonly used to

connect the Blu-ray disc player with a TV and other components.

You may choose from VIDEO, S-VIDEO, COMPONENT

and HDMI mode for video output.

Use the TV OUT SELECT button on the front panel of the

unit to select the video output while the disc is stopped.

- Video Output mode changes as follows when the

TV OUT SELECT button is pressed: HDMI

➞ VIDEO ➞

COMP ➞ HDMI order.

- To select HDMI output, press the TV OUT SELECT

button until the HDMI indicator lights.

- To select COMPONENT output, press the TV OUT

SELECT button until the COMP indicator lights.

- To select VIDEO or S-VIDEO output, press the TV OUT

SELECT button until the VIDEO indicator lights.

Connecting to a TV(Video)

1.

Using video/audio cables, connect the VIDEO

(yellow)/AUDIO (red and white) OUT terminals on the rear

of the Blu-ray disc player to the VIDEO (yellow) /AUDIO

(red and white) IN terminals of your TV.

2. Turn on the Blu-ray disc player and TV.

3.

Press the TV OUT SELECT button on the front panel

of the unit until the VIDEO indicator lights. Make sure

the unit is in Stop mode.

4. Press the input selector on your TV remote control

until the Video signal from the Blu-ray disc player

appears on the TV screen.

• If you have set the remote control to properly operate

with your TV (pages 15~16), press the INPUT SEL.

button on the remote control and select VIDEO as the

external source of the TV.

■

Noise may be generated if the audio cable

placed too close to the power cable.

■

If you want to connect to an Amplifier,

please refer to the Amplifier connection

page. (See pages 21 to 22)

■

The number and position of terminals may

vary depending on your TV set. Please refer

to the user's manual of your TV.

■

If there is one audio input terminal on the TV,

connect it to the [AUDIO OUT][left] (white)

terminal of the Blu-ray disc player.

■

If you set the TV Out Select to HDMI, the

Video/S-Video and Component Out

terminals will not output any signal.

■

Blu-ray Disc Playback is not available with

this connection.

NOTE

■

If HDMI mode is selected for TVs providing

display information (EDID), the TV resolution

will be automatically changed to the best

quality supported by the TV.

■

If HDMI mode is selected for TVs that do not

provide display information (EDID),

resolution will be adjusted to 720p.

■

If COMP (Component) mode is selected,

resolution will be adjusted to 576p/480p.

■

If VIDEO mode is selected, resolution will be

adjusted to 576i/480i .

■

Only resolutions supported by the TV are

available.

■

Select the resolution from <Setup> ➞

<Display Setup>. (See page 43.)

■

In case of NTSC(60 Frame/Field Contents)

disc playback, video output format is

NTSC(60Hz Frame/Field rate) format.

NOTE

TV Output Selection

Feature

229L_P1000_XER_ENG_IB_1~38 12/22/06 4:03 PM Page 18

English - 19

Connections

English

Connecting to a TV (S-Video)

- Connecting to your TV using an S-Video cable.

- You will enjoy high quality images. S-Video separates

the picture element into black and white(Y) and

color(C) signals to present clearer images than regular

video input mode.

(Audio signals are delivered through the audio output.)

1. Using an S-Video cable (not included), connect the

S-VIDEO OUT terminal on the rear of the Blu-ray

disc player to the S-VIDEO IN terminal of your TV.

2. Using the audio cables, connect the AUDIO (red and

white) OUT terminals on the rear of the Blu-ray disc

player to the AUDIO (red and white) IN terminals of

your TV. Turn on the Blu-ray disc player and TV.

3. Press the TV OUT SELECT button on the front panel

of the unit until the VIDEO indicator lights. Make sure

the unit is in Stop mode.

4. Press the input selector on your TV remote control

until the S-Video signal from the Blu-ray disc player

appears on your TV screen.

• If you have set the remote control to properly operate

with your TV (pages 15~16), press the INPUT SEL.

button on the remote control and select S-VIDEO as

the external source of the TV.

■

The component terminals on your TV may be

marked “R-Y, B-Y, Y” or “Cr, Cb, Y” instead of

“PR, PB, Y” depending on the manufacturer.

The number and position of terminals may vary

depending on the TV set. Please refer to the

user's manual of your TV.

■

Blu-ray Disc Playback is available with this

connection in 720p or 1080i resolution.

NOTE

■

Blu-ray Disc Playback is not available with this

connection.

NOTE

RED

WHITE

RED

WHITE

Audio Cable

S-Video Cable

(not included)

Connecting to a TV (Component)

- Connecting to your TV using Component video cables.

- You will enjoy high quality and accurate color

reproduction images. Component video separates the

picture element into black and white(Y), blue(PB),

red(PR) signals to present clear and clean images.

(Audio signals are delivered through the audio output.)

1. Using component video cables, connect the

COMPONENT VIDEO OUT terminals on the rear of

the Blu-ray disc player to the COMPONENT IN

terminals of your TV.

2. Using the audio cables, connect the AUDIO (red and

white) OUT terminals on the rear of the Blu-ray disc

player to the AUDIO (red and white) IN terminals of

your TV. Turn on the Blu-ray disc player and TV.

3. Press the TV OUT SELECT button on the front panel

of the unit until the COMP indicator lights. Make sure

the unit is in Stop mode.

4. Press the input selector on your TV remote control

until the Component signal from the Blu-ray disc

player appears on the TV screen.

• If you have set the remote control to properly operate

with your TV (pages 15~16), press the INPUT SEL.

button on the remote control and select COMPONENT

as the external source of the TV.

RED

WHITE

RED

WHITE

RED

BLUE

GREEN

RED

BLUE

GREEN

Audio Cable

Component cable

229L_P1000_XER_ENG_IB_1~38 12/22/06 4:03 PM Page 19

La pagina sta caricando ...

Samsung BD-P1000 Manuale utente

Samsung BD-P1000 Manuale utente

in altre lingue

Documenti correlati

Altri documenti