Yamaha DVDC900 Manuale utente

Marca: Yamaha

Modello: DVDC900

Categoria: Lettori DVD

Tipo: Manuale utente

Questo manuale è adatto anche per

DVD-C900

OWNER’S MANUAL

MODE D’EMPLOI

NATURAL SOUND DVD PLAYER

LECTEUR DVD

NATURAL SOUND DVD PLAYER DVD

C900

POWER

PLAYXCHANGE

OPEN/CLOSE

SKIP/

DVD

VIDEO CD

AUTO

DISPLAY OFF

12345

DISC

1 Read Instructions – All the safety and operating instructions

should be read before the appliance is operated.

2 Retain Instructions – The safety and operating instructions

should be retained for future reference.

3 Heed Warnings – All warnings on the appliance and in the

operating instructions should be adhered to.

4 Follow Instructions – All operating and use instructions should

be followed.

5 Cleaning — Unplug this video product from the wall outlet

before cleaning. Do not use liquid cleaners or aerosol

cleaners. Use a damp cloth for cleaning.

Exception: A product that is meant for uninterrupted service

and that for some specific reason, such as the possibility of

the loss of an authorization code for a CATV converter, is not

intended to be unplugged by the user for cleaning or any

other purpose, may exclude the reference to unplugging the

appliance in the cleaning description otherwise required in

item 5.

6 Attachments — Do not use attachments not recommended by

the video product manufacturer as they may cause hazards.

7 Water and Moisture – Do not use this video product near

water – for example, near a bathtub, washbowl, kitchen sink,

laundry tub, in a wet basement, or near a swimming pool, and

the like.

8 Accessories — Do not place this video product on an unstable

cart, stand, tripod, bracket, or table. The video product may

fall, causing serious injury to a child or adult, and serious

damage to the appliance. Use only with a cart, stand, tripod,

bracket, or table recommended by the manufacturer, or sold

with the video product. Any mounting of the appliance should

follow the manufacturer’s instructions, and should use a

mounting accessory recommended

by the manufacturer.

8A An appliance and cart combination

should be moved with care. Quick

stops, excessive force, and uneven

surfaces may cause the appliance

and cart combination to overturn.

9 Ventilation — Slots and openings in the cabinet are provided

for ventilation and to ensure reliable operation of the video

product and to protect it from overheating, and these

openings must not be blocked or covered. The openings

should never be blocked by placing the video product on a

bed, sofa, rug, or other similar surface. This video product

should never be placed near or over a radiator or heat

installation such as a bookcase or rack unless proper

ventilation is provided or the manufacturer’s instructions have

been adhered to.

10 Power Sources — This video product should be operated only

from the type of power source indicated on the marking label.

If you are not sure of the type of power supply to your home,

consult your appliance dealer or local power company. For

video products intended to operate from battery power, or

other sources, refer to the operating instructions.

11 Grounding or Polarization — This video product is equipped

with a polarized alternating-current line plug (a plug having

one blade wider than the other). This plug will fit into the

power outlet only one way. This is a safety feature. If you are

unable to insert the plug fully into the outlet, try reversing the

plug. If the plug should still fail to fit, contact your electrician to

replace your obsolete outlet. Do not defeat the safety purpose

of the polarized plug.

Alternate Warnings —This video product is equipped with a 3-

wire grounding-type plug, a plug having a third (grounding)

pin. This plug will only fit into a grounding-type power outlet.

This is a safety feature. If you are unable to insert the plug

into the outlet, contact your electrician to replace your

obsolete outlet. Do not defeat the safety purpose of the

grounding-type plug.

12 Power-Cord Protection – Power-supply cords should be

routed so that they are not likely to be walked on or pinched

by items placed upon or against them, paying particular

attention to cords at plugs, convenience receptacles, and the

point where they exit from the appliance.

SAFETY INSTRUCTIONS

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead

symbol, within an equilateral triangle,

is intended to alert you to the

presence of uninsulated “dangerous

voltage” within the product’s

enclosure that may be of sufficient

magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an

equilateral triangle is intended to alert

you to the presence of important

operating and maintenance

(servicing) instructions in the

literature accompanying the

appliance.

•

Explanation of Graphical Symbols

CAUTION

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN

OR MOISTURE.

IMPORTANT

Please record the serial number of your unit

in the space below.

Model:

Serial No.:

The serial number is located on the rear of

the unit.

Retain this Owner’s Manual in a safe place

for future reference.

English

1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the

instructions contained in this manual, meets FCC

requirements. Modifications not expressly approved by

Yamaha may void your authority, granted by the FCC, to

use the product.

2. IMPORTANT : When connecting this product to

accessories and/or another product use only high quality

shielded cables. Cable/s supplied with this product

MUST be used. Follow all installation instructions.

Failure to follow instructions could void your FCC

authorization to use this product in the USA.

3. NOTE : This product has been tested and found to

comply with the requirements listed in FCC Regulations,

Part 15 for Class “B” digital devices. Compliance with

these requirements provides a reasonable level of

assurance that your use of this product in a residential

environment will not result in harmful interference with

other electronic devices.

This equipment generates/uses radio frequencies and, if

not installed and used according to the instructions

found in the users manual, may cause interference

harmful to the operation of other electronic devices.

Compliance with FCC regulations does not guarantee that

interference will not occur in all installations. If this product

is found to be the source of interference, which can be

determined by turning the unit “OFF” and “ON”, please try

to eliminate the problem by using one of the following

measures:

Relocate either this product or the device that is being

affected by the interference.

Utilize power outlets that are on different branch (circuit

breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the

antenna. If the antenna lead-in is 300 ohm ribbon lead,

change the lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory

results, please contact the local retailer authorized to

distribute this type of product. If you can not locate the

appropriate retailer, please contact Yamaha Electronics

Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA

90620.

The above statements apply ONLY to those products

distributed by Yamaha Corporation of America or its

subsidiaries.

FCC INFORMATION (for US customers only)

13 Outdoor Antenna Grounding — If an outside antenna or cable

system is connected to the video product, be sure the

antenna or cable system is grounded so as to provide some

protection against voltage surges and built-up static charges.

Article 810 of the National Electrical Code, ANSI/NFPA No.

70, provides information with regard to proper grounding of

the mast and supporting structure, grounding of the lead-in

wire to an antenna discharge unit, size of grounding

conductors, location of antenna-discharge unit, connection to

grounding electrodes, and requirements for the grounding

electrode. See the figure below.

14 Lightning — For added protection for this video product

receiver during a lightning storm, or when it is left unattended

and unused for long periods of time, unplug it from the wall

outlet and disconnect the antenna or cable system. This will

prevent damage to the video product due to lightning and

power-line surges.

15 Power Lines — An outside antenna system should not be

located in the vicinity of overhead power lines or other electric

light or power circuits, or where it can fall into such power

lines or circuits. When installing an outside antenna system,

extreme care should be taken to keep from touching such

power lines or circuits as contact with them might be fatal.

16 Overloading — Do not overload wall outlets and extension

cords as this can result in a risk of fire or electric shock.

17 Object and Liquid Entry — Never push objects of any kind

into this video product through openings as they may touch

dangerous voltage points or short-out parts that could result

in a fire or electric shock. Never spill liquid of any kind on the

video product.

18 Servicing — Do not attempt to service this video product

yourself as opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all servicing to

qualified service personnel.

19 Damage Requiring Service — Unplug this video product from

the wall outlet and refer servicing to qualified service

personnel under the following conditions:

a. When the power-supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen into the

video product.

c. If the video product has been exposed to rain or water.

d. If the video product does not operate normally by following

the operating instructions. Adjust only those controls that

are covered by the operating instructions as an improper

adjustment of other controls may result in damage and will

often require extensive work by a qualified technician to

restore the video product to its normal operation.

e. If the video product has been dropped or the cabinet has

been damaged.

f. When the video product exhibits a distinct change in

performance — this indicates a need for service.

20 Replacement Parts — When replacement parts are required,

be sure the service technician has used replacement parts

specified by the manufacturer or have the same

characteristics as the original part. Unauthorized substitutions

may result in fire, electric shock or other hazards.

21 Safety Check — Upon completion of any service or repairs to

this video product, ask the service technician to perform

safety checks to determine that the video product is in proper

operating condition.

EXAMPLE OF ANTENNA GROUNDING

MAST

GROUND

CLAMP

ANTENNA

LEAD IN

WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810–20)

GROUNDING CONDUCTORS

(NEC SECTION 810–21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250. PART H)

ELECTRIC

SERVICE

EQUIPMENT

NEC – NATIONAL ELECTRICAL CODE

Thank you for selecting this YAMAHA DVD player

CONTENTS

SAFETY INSTRUCTIONS ......Inside of the front cover

Features ....................................................................1

Caution ......................................................................2

Getting started ..........................................................4

Unpacking ..............................................................................4

Installing batteries in the remote controller ............................5

Notes about the remote controller ..........................................5

Names of parts and their functions ........................6

Connections .............................................................9

Speaker setup ........................................................................9

n Speaker configuration .....................................................9

n Placing speakers .............................................................9

Audio connections ................................................................10

n Connecting to an AV amplifier (or receiver) equipped with

a Dolby Digital, MPEG or DTS decoder, or connecting to

a Dolby Digital, MPEG or DTS decoder ........................10

n Connecting to an AV amplifier (or receiver) equipped

with 6 channel input terminals

<For China and General models only>.........................12

n Connecting to a stereo amplifier that has neither

6 channel audio signal input terminals nor Dolby Digital

decoder ..........................................................................13

Video connections ................................................................14

n Connecting to an amplifier equipped with an RCA type

video signal input terminal (including an S-video input

terminal) .........................................................................14

n Connecting to a TV equipped with component

video input terminals ......................................................15

Basic operation ......................................................16

Basic playback .....................................................................16

Playing back a preferred scene or track ...............................19

n Beginning playback from a preferred chapter (or track)

.......................................................................................19

n Skipping to a preferred chapter (or track) on the disc

(Skip search)..................................................................19

n Beginning playback from a preferred title (for DVDs)

or index number (for Video CDs/CDs)............................20

n Beginning playback from a preferred time point

on the disc......................................................................21

Other ways of playback ........................................................22

n To advance or reverse playback rapidly

(Rapid search)................................................................22

n To still picture (or suspend playback).............................22

n Frame advance [ and only].................................22

n To advance or reverse playback in a preferred speed

(Multi-speed playback) [ and only]......................23

n Operations unique for a Video CD in the Playback

Control mode [ only].................................................25

n Changing the audio output mode (to enjoy using a

multisound disc etc.) [ and only].........................26

Displaying various information ............................27

Switching the time display.....................................................27

On Screen Display ...............................................................29

Advanced operation ...............................................32

Repeat play ..........................................................................32

Repeat play between specified two points (A-B repeat play)

..............................................................................................33

Program play ........................................................................34

Random play ........................................................................37

Changing subtitle language [ only]..................................38

Changing audio sound track language [ only].................39

Using a title menu [ only].................................................40

Using a DVD menu [ only]...............................................41

Viewing from another angle [ only]..................................42

Initial settings (on the SET UP menu) ..................43

Items ....................................................................................43

Common procedure for setting change ................................44

Item description and setting change ....................................45

DVD Settings

TV Type .........................................................................45

Display Mode .................................................................46

Menu Language ............................................................47

Subtitle Language .........................................................48

Audio Language ............................................................49

Rating Level ..................................................................50

VCD Settings

Playback Control ...........................................................52

Display Settings

Guide Display ................................................................53

OSD Language ..............................................................54

Background Screen .......................................................55

Screen Saver .................................................................56

FL Dimmer .....................................................................57

Signal System Conversion [ and only]

<For China and General models only> ........................58

Audio Settings

Digital Output .................................................................59

Dynamic Range Control

<For China and General models only> ........................61

Speaker [ only]

<For China and General models only> ........................62

Appendix .................................................................64

Troubleshooting ...................................................................64

Definition of terms.................................................................66

Language code list ...............................................................67

Region management information .........................................68

Notes about handling discs ..................................................68

Specifications .......................................................................69

DVD

VCD

DVD

VCD

DVD

VCD

DVD

English

●

5-Disc Carousel Auto-Changer (for

Playing DVDs, Video CDs and Compact

Discs)

●

Full Opening Disc Table for Changing

5 Discs at a Time

●

Compatible with Almost of All Utility

Functions of DVD Discs

●

PLAYXCHANGE; Disc Changing

Capability while Playing Another

●

Program Play

●

Random Play

●

Single Track/Full Disc Repeat Play and

A-B Repeat Play for Repeating a Section

between Two Specified Points

●

Multi-Speed Playback Capability

●

On Screen Display Function (Displays

This Unit’s Operation Status and Disc

Information on the TV Monitor)

●

SET UP Menu Which Provides You with

Various Changeable or Adjustable Items

for Using This Unit in the Most Suitable

Condition

●

1 OPTICAL and 1 COAXIAL Digital

Terminals to Output Digital Audio Signals

Encoded with Dolby Digital, DTS, MPEG

or Linear PCM

●

S VIDEO and COMPONENT VIDEO

Outputs for High-Quality Picture

Reproduction

●

Remote Control Capability

China and General models only

●

Built-in Dolby Digital Decoder to Provide

You with High-quality 5.1-channel

Surround Sound of Sources Encoded

with Dolby Digital

Features

About the symbols used in this manual

A section whose title has one of the following symbols is

applicable only to the disc represented by the symbol.

.............DVD

.............Video CD

.............CD

* A section with no symbol is applicable to all discs.

DVD

VCD

Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of Dolby

Laboratories. Confidential Unpublished Works.

1 To ensure the finest performance, please read this manual

carefully. Keep it in a safe place for future reference.

2 The voltage to be used must be the same as that specified

on this unit. Using this unit with a higher voltage than that

which is specified is dangerous and may result in a fire or

other type of accident causing damage. YAMAHA will not

be held responsible for any damage resulting from use of

this unit with a voltage other than that which is specified.

3 Install your unit in a cool, dry, clean place – away from

windows, heat sources, and too much vibration, dust,

moisture or cold. Avoid sources of hum (transformers,

motors). To prevent fire or electrical shock, do not expose

to rain or water.

4 This unit should not be placed on appliances, such as

amplifiers, that produce heat, or placed in a cabinet that

impedes the flow of air. This may result in a failure in this

unit. Install this unit in a well ventilated place. In addition, do

not place objects on this unit.

5 The generated digital signals may interfere with other

equipment such as tuners or receivers. Move the system

farther away from such equipment if interference is

observed.

6 Sudden temperature changes and storage or operation in

an extremely humid environment may cause condensation

inside the cabinet.

Condensation can cause the unit to malfunction.

To eliminate condensation, leave the power on with no disc

in the unit until normal playback becomes possible (about 1

hour).

7 Do not operate the unit upside-down. It may overheat,

possibly causing damage.

8 Never open the cabinet. If a foreign object drops into the

unit, contact your dealer.

9 To prevent lightning damage, unplug the power cord and

remove the antenna cable during electrical storms.

10Do not attempt to clean the unit with chemical solvents; this

might damage the finish. Use a clean, dry cloth.

11Do not use force on switches, knobs or cords. When

moving the set, first turn the unit off. Then gently

disconnect the power plug and the cords connecting to

other equipment. Never pull the cord itself.

12Always set the volume control on the amplifier to minimum

before starting a disc play: increase the volume gradually to

an appropriate level after play has started.

13Be sure to read the “TROUBLESHOOTING” section on

common operating errors before concluding that your unit is

faulty.

This unit can play discs of the following types only.

Video CDs are classified into two types, version 1.1 and 2.0. This unit can play not only discs of version 1.1, but also version

2.0 on which a Playback Control can be made.

Never attempt to play back a disc other than above with this unit because it may cause a damage to this unit and/or other units

connected to this unit.

Examples of disc types which this unit cannot play back:

CD-R, CD-EXTRA, CD-ROM, CD-G, PHOTO CD, DVD-ROM, VSD, CDV, etc.

Note

DVDs and Video CDs can only utilize the features with which they were designed by the software creators. Depending

on the contents of each disc, some operations described in this manual may become inoperative. Be sure to refer to

the instruction for each respective disc.

Type of disc

DVD

Video CD

Mark printed

on the disc

Type of signal

recorded

Sound

Picture (Movie)

Sound

Picture (Movie)

Sound only

Size (Dimension)

12 cm

8 cm (Single type)

12 cm

8 cm (Single type)

12 cm

8 cm (Single type)

Maximum possible

play time

Approx. 4 hours (One side only)

Approx. 8 hours (Both sides)

Approx. 80 minutes (One side only)

Approx. 160 minutes (Both sides)

74 minutes

20 minutes

74 minutes

20 minutes

Caution: Read this before operating your unit.

English

Caution

To prevent a malfunction of this unit:

● Do not use any nonstandard shaped

disc (heart etc.) available on the

market, because it may damage the

unit.

● Do not use a disc with tape, seals, or paste on it, because

damage to the unit may result.

Some nonstandard discs are available on the market though

they look the same as the standard ones. This unit may not

be able to play back such discs in the ways described on this

owner’s manual.

This unit is designed for home use only. Do not use this

unit for business purposes.

Be sure to place this unit on a level surface. If not so, this

unit will fail to work normally at the PLAYXCHANGE operation

and cause damage to the disc(s) and this unit itself.

Caution for moving this unit

● When moving this unit, first remove all discs from the disc

table and close the table by pressing the OPEN/CLOSE

button, and then switch off the power after you confirm

that the front panel display indicates as follows.

Never switch off the power if the front panel display is not

pictured as above, otherwise the unit will break down

during moving because the internal mechanism is not

locked.

● Be sure not to lift or tip the unit with discs remaining in it.

FOR CANADIAN CUSTOMERS

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE

OF PLUG TO WIDE SLOT AND FULLY INSERT.

THIS CLASS B DIGITAL APPARATUS MEETS ALL

REQUIREMENTS OF THE CANADIAN INTERFERENCE-

CAUSING EQUIPMENT REGULATIONS.

WARNING

To reduce the risk of fire or electric shock, do not expose this

unit to rain or moisture.

To avoid electrical shock, do not open the cabinet. Refer

servicing to qualified personnel only.

DANGER

Invisible laser radiation when open and interlock failed or

defeated.

Avoid direct exposure to beam.

CAUTION

DVD/VIDEO CD/CD PLAYER IS A CLASS 1 LASER

PRODUCT. HOWEVER THIS DVD/VIDEO CD/CD

PLAYER USES A VISIBLE LASER BEAM WHICH

COULD CAUSE HAZARDOUS RADIATION EXPOSURE

IF DIRECTED. BE SURE TO OPERATE THE DVD/VIDEO

CD/CD PLAYER CORRECTLY AS INSTRUCTED.

WHEN THIS DVD/VIDEO CD/CD PLAYER IS PLUGGED

TO THE WALL OUTLET, DO NOT PLACE YOUR EYES

CLOSE TO THE OPENING OF THE DISC TRAY AND

OTHER OPENINGS TO LOOK INTO THE INSIDE OF

THIS PLAYER.

USE OF CONTROLS OR ADJUSTMENTS OR

PERFORMANCE OF PROCEDURES OTHER THAN

THOSE SPECIFIED HEREIN MAY RESULT IN

HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR

YOURSELF. REFER SERVICING TO QUALIFIED

PERSONNEL.

Laser component in this product is capable of emitting

radiation exceeding the limit for Class 1.

DISC

(Inside of product)

YAMAHA and the Electronic Industries Association’s

Consumer Electronics Group want you to get the most out of

your equipment by playing it at a safe level. One that lets the

sound come through loud and clear without annoying blaring or

distortion – and, most importantly, without affecting your

sensitive hearing.

Since hearing damage from loud sounds is often

undetectable until it is too late, YAMAHA and the

Electronic Industries Association’s Consumer

Electronics Group recommend you to avoid

prolonged exposure from excessive volume levels.

We Want You Listening For A Lifetime

Unpacking

Carefully take this unit and accessories out of the box. You should find the unit itself and the following accessories.

Remote controller Batteries (size AA, R6, UM-3)

Audio/Video connection cord

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

Getting started

English

Getting started

Installing batteries in the remote

controller

Since the remote controller will be used for many of this unit’s

control operations, you should begin by installing the supplied

batteries.

1. Turn the remote controller over and slide the battery

compartment cover in the direction of the arrow.

2. Insert the batteries (R6, AA, UM-3 type) according to the

polarity markings on the inside of the battery compartment.

3. Close the battery compartment cover.

Notes about the remote controller

Battery replacement

If you find that the remote controller must be used closer to the

main unit, the batteries are weak. Replace both batteries with

new ones.

Notes

●

Use only AA, R6, UM-3 batteries.

●

Be sure the polarities are correct. (See the illustration

inside the battery compartment.)

●

Remove the batteries if the remote controller is not used for

an extended period of time.

●

If batteries leak, dispose of them immediately. Avoid

touching the leaked material and contact with clothing, etc.

Clean the battery compartment thoroughly before installing

new batteries.

Remote controller operation range

Notes

●

The area between the remote controller and the main unit

must be clear of large obstacles.

●

Do not expose the remote control sensor to strong lighting,

in particular, an inverter type fluorescent lamp. Otherwise,

the remote controller may not work properly. If necessary,

position the main unit away from direct lighting.

DISC

30°

Remote control

sensor

Within apprxoimately

6 m (19.7 feet)

Front panel

1 POWER switch (p. 16, 17)

Press this switch to turn on the power. Press this switch again

to turn off the power.

2 Disc table (p. 16)

Up to 5 discs can be loaded on the disc table. Five disc-setting

positions on the disc table are numbered from 1 to 5.

3 PLAYXCHANGE button (p. 18)

Press this button to open and close the disc table while playing

a disc. This function enables you to exchange discs other than

the one being played.

4 OPEN/CLOSE button (p. 16)

Opens and closes the disc table.

5 AUTO DISPLAY OFF Indicator (p. 57)

Lights up when “5 FL Dimmer” on the SET UP menu is set to

“OFF”.

6 Remote control sensor

Receives signals from the remote controller.

7 Display panel

See page 8.

8 DISC (1, 2, 3, 4, 5) buttons and indicators

(p. 16, 18, 34)

Pressing a button selects the corresponding number of disc.

The illumination of an indicator shows that the corresponding

number of tray has a disc which this unit can play back.

9 / (PLAY/PAUSE) button

(p. 16, 21, 22, 32, 34, 36, 37)

Pressing this button starts playback. If this button is pressed

during playback, playback is suspended or a picture is kept

still, and if this button is pressed again, normal playback

resumes.

Remote controller

See the pages in parenthesis for details regarding operation.

NATURAL SOUND DVD PLAYER DVD

C900

POWER

AUTO

DISPLAY OFF

12345

DISC

PLAYXCHANGE

OPEN/CLOSE

SKIP/

DVD

VIDEO CD

12 34

A098765

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

KLM

Names of parts and their functions

English

Names of parts and their functions

0 SKIP/SEARCH buttons (p. 19, 22, 24, 25)

SKIP :

Press this button to locate the beginning of the next

chapter or next track.

SKIP :

Press this button to locate the beginning of the

currently playing chapter or track, or the previous

chapter or track.

SEARCH :

Press and hold this button to advance the playback

rapidly.

SEARCH :

Press and hold this button to reverse the playback

rapidly.

A STOP ( ) button (p. 17, 36, 37)

Stops playback.

B DISC SKIP button (p. 16, 34, 37)

Whenever this button is pressed, the selected disc changes.

C CANCEL button (p. 36)

Used to cancel some specific mode or setting of this unit. See

the pages for operating methods for details.

D Numeric buttons

(p. 17–21, 24, 34, 36, 40, 41, 44, 47, 50)

Used to select a title number, chapter number, track number,

etc.

E TITLE button (p. 40)

Press this button to display the title menu of a DVD disc on

the monitor screen. For a disc which has no title menu,

pressing this button is ineffective. For Video CDs and CDs,

pressing this button is ineffective.

F ANGLE button (p. 42)

Whenever pressed, the viewing angle of the picture changes.

This button is effective only for scenes (on a DVD) which have

some angles of view.

G MENU button (p. 41)

Press this button to display the DVD menu of a DVD disc on

the monitor screen. For a disc which has no DVD menu,

pressing this button is ineffective.

H SET UP button (p. 44)

Press this button to display the SET UP menu on the monitor

screen.

I ON SCREEN button (p. 29)

Press this button to turn on and off the OSD (On Screen

Display) screen on the TV monitor. It gives you information

about the current status of this unit and the selected disc.

J S/F REPEAT button (p. 32)

Whenever you press this button, repeat play mode changes.

The selected mode is shown on the front panel display for

single or full repeat. This button also allows you to turn off the

mode.

A/B REPEAT button (p. 33)

Makes this unit repeatedly play a section between 2 points (A

and B) you designate on the disc.

K DISC MODE button (p. 16, 37)

Changes the disc play mode between the single-disc play

mode and the all-disc play mode. In the single-disc play

mode, only a selected disc is played back. In the all-disc play

mode, all discs on the disc table are played back sequentially.

L TIME button (p. 27, 28, 34, 35)

Switches the time display mode.

M RANDOM button (p. 37)

Press this button to play back titles or tracks on a designated

disc or all discs on the disc table in a random order.

N PROG button (p. 34)

Used for programming titles, tracks or a mixture of them in

your desired order.

O TITLE/INDEX button (p. 20, 21)

Whenever you press this button, search mode changes. The

selected mode is shown on the monitor screen for title (or

index) search or time search. This button also allows you to

turn off the mode.

P RETURN button (p. 17, 25, 44, 62)

Press this button to show the previous menu on the monitor

screen.

Q AUDIO button

For DVDs (p. 39)

Changes the audio sound track language if the selected DVD

has two or more audio sound track languages.

For Video CDs and CDs (p. 26)

Changes the output mode of the audio signal output terminals.

Every time this button is pressed, the output mode changes to

“left channel only”, “right channel only”, “left and right

channels”, and repeated.

R /// (p. 17, 23, 40, 41, 44–62)

Move cursors or change selections on the monitor screen.

S SUBTITLE button (p. 38)

Changes the subtitle language if the selected DVD has two or

more subtitle languages.

T (SUBTITLE) OFF/ON button (p. 38)

Turns on and off the showing of subtitles on the monitor

screen.

U MULTI SPEED button (p. 23)

Makes this unit enter into the multi-speed mode during

playback. When this unit is stopped, pressing this button is

ineffective.

V SELECT button (p. 17, 40, 41, 44–62)

Activates the selected menu item or input value.

W PLAY button (p. 16, 21, 22, 32, 34, 36, 37)

Starts playback.

X STILL/PAUSE button (p. 21, 22)

Suspends playback temporarily or keep a picture still. Press

the PLAY or

/ button to return to the standard speed

playback.

Names of parts and their functions

Front panel display

1 PBC

Lights up when this unit is in the Playback Control mode for

playing a Video CD, version 2.0.

2 DVD

Lights up when the selected disc is a DVD.

3 PGM

Lights up when this unit is in the program play mode.

4 VCD

Lights up when the selected disc is a Video CD.

5 CD

Lights up when the selected disc is a compact disc.

6 RDM

Lights up when this unit is in the random play mode.

Lights up during playback.

Lights up while playback is paused.

9 PCM

Lights up when a source recorded in Linear PCM is played

back.

0 DOLBY DIGITAL

Lights up when a source encoded with Dolby Digital is played

back.

A MPEG

Lights up when a source encoded with MPEG 1 or MPEG 2 is

played back.

B DTS

Lights up when a source encoded with DTS is played back.

C DISC 1

Lights up when this unit is in the single-disc play mode.

DISC 5

Lights up when this unit is in the all-disc play mode.

D REP S

Lights up when this unit is in the single-repeat play mode.

REP F

Lights up when this unit is in the full-repeat play mode.

REP A B

Lights up or flashes when this unit is in the A-B repeat play

mode.

E Tray numbers with discs only light up.

The circle enclosing the currently selected tray number lights

up.

F TITLE

Lights up with the selected title number.

TRACK

Lights up with the selected track number.

G CHP

Lights up with the selected chapter number.

INDEX

Lights up with the selected index number.

H Shows a playing time, for example the elapsed time of a

playing chapter and the remaining time (REMAIN) of a

playing chapter.

DVD VCD CD

PBCPGMRDM

TRACK

TITLE

PCM

INDEX

CHP

DTS

TIME

DISC

REP

MPEG

TOTAL

REMAIN

DOLBY

DIGITAL

234 56 7 89 0 AB C D

EF G H

English

Speaker setup

We recommend you to set up a multi-speaker system to enjoy the 5.1 channel surround sound of sources encoded with Dolby

Digital, MPEG or DTS.

m Speaker configuration

The most recommended speaker configuration is the 6 speaker

configuration: 2 main speakers, 2 effect speakers, a center

speaker and a subwoofer.

The main speakers are used for the main source sound. The

effect speakers are used for the effect and surround sounds,

and the center speaker is for the center sounds (dialog etc.).

The subwoofer is for reinforcing low frequencies on your audio

system and low frequency effect sounds of the subwoofer-

channel.

For China and General models only

This unit is designed to output signals of 5.1 channels

efficiently according to your speaker system if you cannot set

up a full 6 speaker configuration. It depends on the setting of “3

Speaker” on the SET UP menu. Refer to pages 62 to 63 for

details. However, this setting is effective only on audio signals

output from the 6CH DISCRETE terminals.

m Placing speakers

Main speakers: On both sides of the TV and almost the

same height as the TV.

Effect speakers: Behind your listening position, facing

slightly inward. Nearly 1.8 m (approx. 6

feet) up from the floor.

Center speaker: Precisely between the main speakers.

(To avoid interference with TV sets, use a

magnetically shielded speaker.)

Subwoofer: The position of the subwoofer is not so

critical because low bass tones are not

highly directional.

Main L Center Main R

Effect L Effect R

Subwoofer

TV set

Subwoofer

Effect L

Effect R

Main L

Main R

Center

Connections

COAXIAL

OPTICAL

MIXED 2CH

VIDEO

COMPONENT VIDEO

VIDEO OUT

S VIDEO

DIGITAL

VIDEO OUT SELECT

VIDEO/

S VIDEO

COMPONENT

VIDEO OUT

MPEG

DTS

COAXIAL OPTICAL

PCM

DIGITAL

AUDIO OUT

REMOTE

CONTROL

OUT IN

Connections

When you connect this unit to an AV amplifier or receiver

equipped with a Dolby Digital, MPEG or DTS decoder, connect

this unit’s OPTICAL (or COAXIAL) terminal to the amplifier’s

optical (or coaxial) digital signal input terminal.

* If the amplifier and Dolby Digital (or MPEG or DTS) decoder

are separated, connect this unit’s OPTICAL (or COAXIAL)

terminal to the decoder’s optical (or coaxial) digital signal

input terminal.

* When you use the Dolby Digital, MPEG or DTS decoder, be

sure to use “1 Digital Output” on the SET UP menu of this

unit to select the “Disc Original” mode for “Dolby Digital”,

“MPEG” or “DTS”. (Refer to page 59 for details.)

Also, connect this unit’s MIXED 2CH AUDIO OUT terminals to

the amplifier’s analog signal input terminals regardless of

making the digital terminal connection. This is necessary for

playing back a source in 2 channel stereo or with Dolby Pro

Logic decoded.

A digital terminal connection is necessary between this

unit and the amplifier (or decoder) for sending the

playback signals of a source encoded with Dolby Digital,

MPEG or DTS to the amplifier (or decoder). This

connection allows you to enjoy a theater-like surround

sound in your home.

Caution: Plug in this unit and other components after all connections are completed.

All connections must be correct, observing the color coding of terminals between this unit and other components.

Audio connections

m Connecting to an AV amplifier (or receiver) equipped with a Dolby Digital,

MPEG or DTS decoder, or connecting to a Dolby Digital, MPEG or DTS

decoder

Connection cord

(not included)

Main

speaker

(Left)

Center

speaker

Main

speaker

(Right)

Subwoofer

To AC

outlet

Rear (surround) speaker

(Left)

Rear (surround) speaker

(Right)

Optical fiber cable

(not included)

Connection cord

(included)

Refer to pages 14-15 for VIDEO

OUT terminal connections.

Refer to pages 14-15 for VIDEO

OUT terminal connections.

AV amplifier or receiver equipped with

a Dolby Digital, MPEG or DTS decoder

Analog audio

input terminals

This unit (U.S.A. model)

English

Connections

Notes on connecting to this unit’s OPTICAL terminal

●

Before using this terminal, remove the terminal’s cover by

pulling it.

●

Make the connection from this terminal to the optical input

terminal of an amplifier by using a commercially available

optical fiber cable.

* Use an optical fiber cable that conforms to EIAJ

standards. Other cables might not function correctly.

●

Be sure to attach the terminal’s cover when this terminal is

not being used, in order to protect the terminal from dust.

When you connect this unit’s OPTICAL or COAXIAL

terminal to the optical or coaxial digital input

terminal of the amplifier which does not include a

Dolby Digital, MPEG or DTS decoder

Use “1 Digital Output” on the SET UP menu to select the

“PCM” mode for “Dolby Digital” and “MPEG”, and select the

“OFF” mode for “DTS”. (Refer to page 59 for details.)

Digital signal output from this unit

For a DVD disc only, the format of digital signal output from this

unit can be selected by the setting of “1 Digital Output” on the

SET UP menu. (See page 59.)

For your reference:

●

Linear PCM is a signal recording format used in CDs. While

CDs are recorded in 44.1 kHz/16 bit, DVDs are recorded in

48 kHz/16 bit up to 96 kHz/24 bit.

●

If you have a Dolby Pro Logic Surround decoder or your AV

amplifier includes a Dolby Pro Logic Surround decoder, you

will obtain the full benefit of Dolby Pro Logic from the same

DVD movies that provide full 5.1-channel Dolby Digital

sound tracks, as well as from titles with the Dolby Surround

mark.

●

Digital signal for linear PCM (48 kHz 20/24 bit) will be

converted into 48 kHz 16 bit and will be output if a DVD you

play back is formatted with code scramble system

(copyright-protection).

Disc

format

Audio

format

Digital signal output from the

OPTICAL and COAXIAL

terminals of this unit

DVD

Dolby Digital

When “Disc

Original” is

selected on “1

Digital Output”

Dolby Digital

bitstream

(2–5.1ch)

PCM (2 ch)

(48 kHz/16 bit)

Video

MPEG 1

audio

PCM (2 ch)

(44.1 kHz/16 bit)

CD Linear PCM PCM (2 ch)

(44.1 kHz/16 bit)

Linear PCM

(48 kHz

16/20/24 bit)

Linear PCM (2 ch)

(48 kHz 16/20/24 bit)

Linear PCM

(96 kHz)

MPEG

(2 or 1)

audio

MPEG (2 or 1)

audio

bitstream

PCM (2 ch)

(48 kHz/16 bit)

When “PCM” is

selected on “1

Digital Output”

When “Disc

Original” is

selected on “1

Digital Output”

When “PCM” is

selected on “1

Digital Output”

DTS

DTS bitstream

No output

When “Disc

Original” is

selected on “1

Digital Output”

When “OFF” is

selected on “1

Digital Output”

Linear PCM

(2 ch) (48 kHz)

No output

When “48kHz

PCM” is

selected on “1

Digital Output”

When “OFF” is

selected on “1

Digital Output”

Terminal’s cover

Connections

This unit includes a Dolby Digital decoder. This enables the

playback of DVDs encoded with Dolby Digital without the need

for an external Dolby Digital decoder. When this unit is

connected to an AV amplifier with 6 channel input terminals,

you can enjoy theater-like surround sounds in your home when

playing back discs encoded with Dolby Digital.

Notes

•

After connections are completed, change the settings of “3

Speaker” on the SET UP menu according to your speaker

system. (See page 62.)

•

When you play back a disc recorded in 2 channel stereo, the

signals are output from the 6CH DISCRETE MAIN terminals

only.

•

You can also connect the OPTICAL or COAXIAL DIGITAL

AUDIO OUT terminal to the amplifier if the amplifier has the

corresponding digital input terminal(s).

If either of those terminals is connected to the amplifier

which does not include a Dolby Digital, MPEG or DTS

decoder, use “1 Digital Output” on the SET UP menu to

select the “PCM” mode for “Dolby Digital” and “MPEG”, and

select the “OFF” mode for “DTS”. (Refer to page 59 for

details.)

m Connecting to an AV amplifier (or receiver) equipped with 6 channel input

terminals

For China and General models only

MAIN

MIXED 2CH

VIDEO

COMPONENT VIDEO

VIDEO OUT

MODE SELECT

PAL NTSC

S VIDEO

SUB

WOOFER

CENTER

SURROUND

6CH DISCRETE

DIGITAL

VIDEO OUT SELECT

VIDEO/

S VIDEO

COMPONENT

VIDEO OUT

MPEG

DTS

COAXIAL

OPTICAL

PCM

DIGITAL

AUDIO OUT

GND

MONITOR OUT

DVD/LD TV/DBS

IN OUT

VCR

IN OUT

VCR

PHONO

DVD/LD TV/DBS

TAPE

REC

OUT

3 4

DVD/LD

TV/DBS

MAIN

R L

SURROUND

R L

CENTER

SUB

WOOFER

6CH

DISCRETE

INPUT

VIDEO

SIGNAL

TAPE

/MD

This unit (General model)

To AC outlet

AV amplifier or receiver equipped

with 6 channel input terminals

Main speaker

(Left)

Center speaker

Main speaker

(Right)

Subwoofer

Rear (surround) speaker

(Left)

Rear (surround) speaker

(Right)

Refer to pages 14-15 for VIDEO

OUT terminal connections.

English

DVD

MIXED 2CH

VIDEO

COMPONENT VIDEO

VIDEO OUT

S VIDEO

DIGITAL

VIDEO OUT SELECT

VIDEO/

S VIDEO

COMPONENT

VIDEO OUT

MPEG

DTS

COAXIAL OPTICAL

PCM

DIGITAL

AUDIO OUT

REMOTE

CONTROL

OUT IN

Amplifier

Connections

Connecting to a stereo amplifier that has neither 6 channel audio signal

input terminals nor Dolby Digital decoder

Connect this unit’s MIXED 2CH AUDIO OUT terminals to the amplifier’s audio signal input terminal printed as “DVD”, “VIDEO”,

“AUX”, etc.

6 channel audio signals encoded with Dolby Digital are mixed down into 2 channels and output from the MIXED 2CH AUDIO OUT

terminals.

Note

If you have no stereo amplifier available, you can connect this unit’s MIXED 2CH AUDIO OUT terminals to your TV’s audio signal

input terminals (if your TV is equipped with RCA type audio signal input terminals).

Refer to pages 14-15 for VIDEO

OUT terminal connections.

Refer to pages 14-15 for VIDEO

OUT terminal connections.

This unit (U.S.A. model)

For Custom Installer

For U.S.A. model only

REMOTE CONTROL (IN, OUT) terminals

These terminals are used for custom installation system.

When this unit is connected to the components for custom

installation system, you can operate this unit with the

system remote control.

Connect the REMOTE CONTROL IN terminal of this unit to

the output terminal of the central controller for custom

installation system.

By connecting the REMOTE CONTROL OUT terminal of

this unit to the REMOTE CONTROL IN terminal of the other

component, you can also operate it with the system remote

control. In this way, up to 6 components can be connected

in series.

REMOTE

CONTROL

OUT IN

Connection cord

(included)

Connections

Video connections

Connecting to an amplifier equipped with an RCA type video signal input

terminal (including an S-video input terminal)

Connect this unit’s VIDEO 1 (or 2) terminal to the amplifier’s RCA type video signal input terminal (labeled “DVD/LD” etc.).

If your amplifier has an S-video input terminal, you can connect this unit’s S VIDEO terminal to the amplifier’s S-video input terminal

by using a commercially available S-connector cable.

When the connection is made in one of these ways, be sure to set the VIDEO OUT SELECT switch to the “VIDEO/S VIDEO”

side.

This unit has two VIDEO terminals. The other terminal can be connected to another amplifier or TV.

Notes

● If your TV has an RCA type video signal input terminal

(including an S-video input terminal), this unit can be

connected to the TV directly.

● Do not connect this unit to the TV through a video cassette

recorder. Otherwise, the picture may not be played back

normally with some DVDs. This is because the copyright

protection circuit built-in this unit operates.

•

Be sure to change the setting of the VIDEO OUT

SELECT switch only when this unit is turned off or the

power cord of this unit is disconnected from the AC

outlet.

S VIDEO terminal

This unit provides you with a S VIDEO terminal in addition to

standard type VIDEO terminals.

The S VIDEO terminal transmits video signals separated into

luminance (Y) signals and color (C) signals. High quality

pictures are obtained from this terminal. In comparison with

the S VIDEO terminal, standard type VIDEO terminals

transmit “composite” video signals.

MIXED 2CH

VIDEO

COMPONENT VIDEO

S VIDEO

DIGITAL

VIDEO OUT SELECT

VIDEO/

S VIDEO

COMPONENT

VIDEO OUT

MPEG

DTS

COAXIAL OPTICAL

PCM

DIGITAL

AUDIO OUT

VIDEO OUT

VIDEO IN

S-VIDEO IN

S VIDEO

MONITOR

OUT

VIDEO

MONITOR

OUT

VIDEO IN S VIDEO IN

VIDEO OUT SELECT

VIDEO/

S VIDEO

COMPONENT

VIDEO OUT

S-video cable (not included)

TV monitor

Amplifier

TV monitor

Refer to pages 10-13

for AUDIO OUT

terminal connections.

Refer to pages 10-13

for AUDIO OUT

terminal connections.

This unit (U.S.A. model)

Connection cord

(not included)

Connection cord (included)

English

MIXED 2CH

VIDEO

COMPONENT VIDEO

S VIDEO

B PR

DIGITAL

VIDEO OUT SELECT

VIDEO/

S VIDEO

COMPONENT

VIDEO OUT

MPEG

DTS

COAXIAL OPTICAL

PCM

DIGITAL

AUDIO OUT

VIDEO OUT

VIDEO OUT SELECT

VIDEO/

S VIDEO

COMPONENT

VIDEO OUT

Connections

Connecting to a TV equipped with component video input terminals

You can connect this unit’s COMPONENT VIDEO OUT

terminals to your TV or projector, if your TV or projector has

component video signal input terminals.

The COMPONENT VIDEO OUT terminals output three types of

chrominance signals separately. By this connection, you can

enjoy high quality pictures with vivid colors.

If you make this connection, be sure to set the VIDEO OUT

SELECT switch to the “COMPONENT VIDEO OUT”

position.

Note

Do not connect this unit’s COMPONENT VIDEO OUT

terminals to component video input terminals special for HD

(High-Definition) TV.

Video connection

cords (not included)

This unit is designed for use with the NTSC and PAL

television formats. Set this switch to the position for the

format your TV monitor employs.

PAL: Set to this position if your TV monitor employs the

PAL format.

NTSC: Set to this position if your TV monitor employs the

NTSC format.

Notes

•

Be sure to change the setting of this switch only when

this unit is turned off or the power cord of this unit is

disconnected from the AC outlet.

•

If “6 Signal System Conversion” on the SET UP menu is set

to “Disc”, the setting of this switch becomes ineffective when

a DVD or Video CD disc is played back. The format

employed on the disc currently played back is automatically

selected.

MODE SELECT (PAL/NTSC) switch <China and General models only>

COMPONENT VIDEO

VIDEO OUT

MODE SELECT

PAL NTSC

S VIDEO

TV monitor

Refer to pages 10-13

for AUDIO OUT

terminal connections.

This unit (U.S.A. model)

NATURAL SOUND DVD PLAYER DVD

C900

POWER

AUTO

DISPLAY OFF

DVD

VIDEO CD

12345

DISC

PLAYXCHANGE

OPEN/CLOSE

SKIP/

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

The On-Screen Display language of your model has been

factory preset as follows:

U.S.A. and General models: English

China model: Chinese

If you would like to change the On-Screen Display language to

another language, please refer to “OSD Language” on the

SET UP menu on page 54.

Preparations

•

If you play back a DVD or a Video CD, turn the TV on and

make some setting changes on the TV if necessary.

•

Turn on the power of your stereo system if this unit is

connected to the stereo system.

Basic playback

1 Press POWER to turn on the power.

2 Press OPEN/CLOSE to open the disc table.

3 Place discs on the trays, label side upward.

* Up to five discs can be loaded on the trays.

The trays are numbered 1 to 5.

* 8 cm (3”) discs can be played back without an adaptor.

4 Press OPEN/CLOSE to close the disc table.

* The disc on the tray 1 is ready to be played back.

Playback may begin automatically depending on some

DVDs.

* If no disc is loaded on the disc tray 1, select another

disc by following step 6.

5 If necessary, change the disc play mode (to “DISC

1” or “DISC 5”) by pressing DISC MODE on the

remote controller confirming it on the front panel

display.

When “DISC 1” is illuminated: Only a designated disc

is played back.

When “DISC 5” is illuminated: All discs on the disc

table are played back sequentially.

6 If you want to select another disc, press DISC

SKIP on the remote controller once or more, or

press DISC (1, 2, 3, 4 or 5) on the front panel.

7 Press PLAY on the remote controller

or / on the front panel to begin playback.

* Playback begins.

* You can skip this step if the disc is already played

back automatically.

When a screen menu appears on the monitor

screen, go on to step 8.

In case of DVDs with menu or Video CDs with Playback

Control, a screen menu appears on the monitor screen.

Example)

1 Sights

TITLE MENU

3 Foods

Souvenirs

2 Hotels

Basic operation

2, 4

La pagina si sta caricando...

Yamaha DVDC900 Manuale utente

Marca: Yamaha

Modello: DVDC900

Categoria: Lettori DVD

Tipo: Manuale utente

Questo manuale è adatto anche per

DVD-C900

Scarica PDF

rapporto

in altre lingue

English: Yamaha DVDC900 User manual
français: Yamaha DVDC900 Manuel utilisateur
español: Yamaha DVDC900 Manual de usuario
Deutsch: Yamaha DVDC900 Benutzerhandbuch
русский: Yamaha DVDC900 Руководство пользователя
Nederlands: Yamaha DVDC900 Handleiding
português: Yamaha DVDC900 Manual do usuário
dansk: Yamaha DVDC900 Brugermanual
čeština: Yamaha DVDC900 Uživatelský manuál
polski: Yamaha DVDC900 Instrukcja obsługi
svenska: Yamaha DVDC900 Användarmanual
Türkçe: Yamaha DVDC900 Kullanım kılavuzu
suomi: Yamaha DVDC900 Ohjekirja
română: Yamaha DVDC900 Manual de utilizare

Yamaha DVDC900 Manuale utente

Questo manuale è adatto anche per

Yamaha DVDC900 Manuale utente

in altre lingue

Documenti correlati

Altri documenti