Sanyo DVD-DX517 Manuale utente

Categoria
Lettori DVD
Tipo
Manuale utente
INSTRUCTION MANUAL
DVD Player
DVD-DX517
Contents
Features............................................................................................2
For your Attention...............................................................................3
Package Contents..............................................................................4
Panel.................................................................................................5
Remote Control...............................................................................6-7
Remote Control Function..................................................................8-9
Connections................................................................................10-11
System Setup.............................................................................12-17
Basic Playback............................................................................18-19
Troubleshooting...............................................................................20
Specifications..................................................................................21
-1-
Features
Thanks for your purchase of our product. Please read through this
manual before making connections and operating this product. Retain
this manual for future reference.
DVD player is a domestic video player of new generation which
produces high quality pictures and Hi-Fi audio effect. Its performance is
much better than that of any previous home video equipment. As the best
signal source , will give you the uppermost enjoyment!it
Built-in Dolby AC-3, MPEG, PCM etc. digital audio decoder.
Hi-Fi, 96kHz/24bit audio digital processor.
Software intelligent upgrade.
High-resolution component video output, support the future video equipment.
Coaxial digital audio output.
With USB port
Compatible with DVD, SVCD, VCD, DVCD, CD, DVD+R/RW, DVD-R/RW, MP3,
High integrated servo system, decoding on single-chip technology, high
reliability and stability, and super error- correction.
Picture CD, etc.
-2-
TO REDUCE THE RISK OF ELECTRIC
SHOCK OR FIRE, DO NOT OPEN THE
COVER. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
IMPORTANT NOTES
For Your Attention
The lightning flash is intended to alert the user to the presence of
dangerous voltage within the product's enclosure, and touching the internal
components may result in a risk of electric shock to persons.
-3-
Please read through this manual before making connections and operating this
product. Retain this manual for future reference.
Don't open the cabinet of this unit. No user-serviceable parts inside. Refer
servicing to qualified personnel only.
Switch off the unit when you don't use it. Switch off the unit and disconnect it
from the AC power supply when it is not being used for a long time. (Plug, as the
disconnected device entirely with power source, should keep in easy-to-
operation in daily life.)
Don't install the unit in a place exposed to heating sources or direct sunshine.
Don't install the unit in a place exposed to moisture or rain.
The apparatus shall not be exposed to dripping or splashing and any object
filled with liquids, such as vases shall not be placed on it.
Install the unit on a horizontal, flat and firm surface with good ventilation. Never
block the vents which will cause malfunction resulting from overheating.
Use a soft and clean cloth to clean the outside of the unit . Never clean it with
chemicals or detergent.
This book is only a guide for user's operation, not a criterion for configuration.
Do not install this apparatus in a confined space,such as a book case or built-in
cabinet.Minimum distance (about 100mm) around the apparatus for sufficient
ventilation.
To be completely disconnected the power input,the mains plug of apparatus
shall be disconnected from the mains.
WARNING: The batteries shall not be exposed to excessive heat such as
sunshine, fire or the like.
CAUTION: Danger of explosion if battery is incorrectly replaced.Replace only
with the same or equivalent type.
The exclamation mark is intended to alert the user to the presence of
important operating instructions.
Package Contents
Package Contents
A/V cable
Remote control
User manual
Use
r
m
a
n
u
a
l
Symbol Contents
Audio + Video
DVD
Disc types
Audio + Video
Audio
Audio
MP3
Video-CD
VCD
CD-DA
JPEG Photo CD
Picture CD
COMPACT
DIGITAL VIDEO
VIDEO CD
Playable Disc and Media Types:
-4-
ÉùµÀ
È·ÈÏ
ѡʱ
ÇúÇú
¿ì ÍË ¿ì½ø
Çú
DVD REGION CODES:
DVD discs and players are covered by a worldwide agreement which limits
playback of DVD discs to specific regions as determined by the software
manufacturer. Most DVDs come marked with a region coding. A disc specified as
playable in one region may not play on a player designed for a different region. A
disc specified as universal or with no region coding (Code 0)may be played in any
region.
The regions are:
Region 1: Canada, USA
Region 2: Europe, Japan, Mid. East, South Africa
Region 3: South-East Asia
Region 4: Australia, Caribbean, Central & South America, New Zealand
Region 5: Africa, Former Soviet Union, India,North Korea, Pakistan
Region 6: China
THIS PLAYER PLAYS REGION 4 DISCS.AND UNIVERSAL (0)
L
R
Panel
-5-
Front Panel
Rear Panel
1. Disc Tray Door
2. Display Screen
3. Remote Control Sensor
4. USB Port
5. Standby/ON Button( )
6. Open/Close Button( )
7. Play/Pause Button( )
8. Stop Button( )
33
44
55
66
77 88
33
44
77
1. Mixed L/R Audio Output
2. Coaxial Digital Audio Output
3. S-VIDEO Output
4. 5.1CH Audio Output
5. AC Power cord
6. Component Video Output
7. Composite Video Output
6655
Remote control
Insert two AAA/1.5V batteries into the remote control. Point the remote control at
the remote sensor on the front panel. The remote control works within a distance of
about 7 metres from the sensor and within an angle of about 30 degrees from the
left and right side.
Note:
Remove the batteries when you do not intend to use the remote control for a long
time.
Do not mix new and used batteries, or different types of batteries.
Weak batteries can leak and severely damage the remote control.
Be environmentally friendly and dispose of batteries according to your
government regulations.
Remote Control Operation
Battery Installation
1
Remove the battery compartment cover
on the back of the remote control.
2
Load the batteries into the battery
compartment making sure that the
batteries have been inserted with the
correct polarities matching the symbols +,
- as indicated inside the battery
compartment.
3
Replace the cover.
-6-
ÉùµÀ
È·ÈÏ
ѡʱ
ÇúÇú
¿ì ÍË ¿ì½ø
Çú
Remote control
-7-
1. STANDBY/ON
2. DIGIT KEYS
3. FAST REWIND( )
/FAST FORWARD( )
4. PLAY( )
5. STOP( )
6. TITLE
7. DIRECTION KEYS
()
8. AUDIO/LANG
9. ANGLE
10. SUBTITLE
11. N/P
12. ZOOM
13. STEP
14. SLOW
15. OSD
(on-screen display)
16. OPEN/CLOSE( )
17. REPEAT
18. A-B REPEAT
19. VOLUME+/-
20. GOTO
21. PREVIOUS( )
/NEXT( )
22. PAUSE( )
23. SETUP
24. ENTER
25. MENU
26. A-MODE
27. V-MODE
28. MUTE
29. L/R/ST
30. USB
31. PROGRAM
2
1
3
4
5
6
8
12
10
14
11
15
16
17
18
19
20
21
22
26
23
27
24
28
30
25
29
31
7
9
13
-8-
GOTO
Press to enter an item in the menu or to confirm and execute a selection.
The direction keys can be used to move the highlight in the menu.
Press to open /close the disc tray.
OPEN/CLOSE
SETUP
Press to enter/exit the setup menu.
The digit keys can be used to input numbers or make selection of a track or a
chapter, etc.
During playback, press to enter the GOTO menu. In the menu, use the
direction key [UP]/[DOWN] to select a setting item and press [ENTER] to enter
the editing state, then with the digit keys input a specific track, disc time, track
time, chapter, title, chapter time or title time to go to directly. Press it again to
exit the GOTO menu.
Press this button to enter/exit the program menu with which you can playback
the contents of a disc in your desired order.
In the program menu, use the direction keys and digit keys to make a program
list, then move the highlight on START and press [ENTER] to start program
playback.
During program playback, press [PROG] to enter the program menu. Now,
STOP is highlighted. Press [ENTER] to cancel the current program playback.
PROG
N/P
Press repeatedly to select a TV type, NTSC, PAL or MULTI.
È·ÈÏ
ENTERENTER
STANDBY/ON
Press to switch on the unit. Press it again to put the unit in standby mode.
Press for fast forward playback. The available speeds are 2X, 4X, 8X, 16X and
32X.
Remote control Function
Press to temporarily pause a playback. Press it again to resume the playback.
Press to start a playback or resume the normal playback from the fast forward,
fast reverse, frame-by-frame, slow-motion playback, etc.
Press to return to the previous chapter/track.
Press to skip to the next chapter/track.
Fast reverse playback. The available speeds are 2X, 4X, 8X, 16X and 32X.
STEP
Press it once to pre-stop a playback. Press [ ] to resume the playback from
the pre-stopped status. Press it twice to stop a playback and the disc will be
reset to the starting point.
Press repeatedly to advance the video frame by frame. Press [ ] to resume the
normal playback. (Note: Applies to DVD, .)VCD discs, etc
-9-
Press repeatedly to switch the repeat modes.
(Note: For VCD2.0, SVCD, etc, this function is invalid when the PBC function is
activated.)
You can repeat a specific section of a disc with this button.
Press this button to mark down the starting point (A) and press it again to mark
down the ending point (B). Then, the unit will playback this section over and over
again. Press it for the third time to cancel A-B repeat and resume to the normal
playback.
Note: Points A and B must be in the same title/ track.
SLOW
REPEAT
A-B
MUTE
Press this button to switch off the sound temporarily. Press it again to switch it on.
VOLUME+/-
Press [VOLUME+] to turn up the volume; press [VOLUME-] to turn down the
volume.
Press repeatedly for slow-motion playback in different speeds. The available
speeds are 1/2, 1/4, 1/8, 1/16 of the normal speed. Press [ ] to resume the normal
playback. (Note: Applies to DVD, VCD discs, etc.)
Press to enter the title menu of a DVD disc.
TITLE
Remote control Function
Press to return to the root menu.
When playing disc encoded with PBC function, press to display the PBC menu.
Press it again to disable the PBC function. (Note: DVD, VCD1.1, CD-DA and MP3
disc have no PBC function.)
MENU
Press repeatedly to switch the subtitles or switch off the subtitle function.
(Note: This function only works with those discs encoded with subtitles.)
SUBTITLE
OSD
Press repeatedly to switch or hide the relative information of the playing disc.
Press repeatedly to select the available audio languages provided by the disc (for
DVD).
AUDIO/LANG
Press repeatedly to switch the available audio channels (LEFT MONO, RIGHT
MONO, MIX-MONO and STEREO) provided by the disc (for VCD).
L/R/ST
Press to switch the viewing angles.
(Note: This function only works with the discs encoded with multiple camera
angles.)
ANGLE
V-MODE
Press repeatedly to switch the video output modes.
A-MODE
Press to switch the audio output mode between 5.1 CHANNELS OUTPUT and
STEREO OUTPUT.
ZOOM
Press this button to zoom in/out the scene. The available zoom ratios are 1/2X,
1/3X, 1/4X, 2X, 3X and 4X. In zoomed-in mode, the direction keys can be used to
move the zooming center.(Note: Applies to DVD, VCD, etc).
Press repeatedly to switch to the connected USB drive or to return to the DVD
mode.
USB
Connections
VIDEO SYSTEM CONNECTION
Component Video
The following video outputs are available for this unit.
S-Video
Use an S-Video cable to connect the S-Video output of this unit to the S-video input of a
TV/monitor.
Use a 3-core AV cable to connect the component outputs of this unit to the corresponding
inputs of a TV/monitor.
Composite Video
Use the cable with yellow plug of an AV cable to connect the composite video output of this
unit to the video input of a TV/monitor.
-10-
Notes:
Dont make all the connections above at one time, otherwise the produced pictures will be
affected.
Only when the video settings conform to the actual video system connections does the
player produce the corresponding video output. (Please refer to the Video Setup in System
Setup chapter).
Of the video outputs above, component is the best, S-VIDEO is good and the composite
video is standard. Use the best available video connection.
DVD Player Video Output
TV/Monitor Video Input
Component Video Input
Connections
VIDEO SYSTEM CONNECTION
Component Video
The following video outputs are available for this unit.
S-Video
Use an S-Video cable to connect the S-Video output of this unit to the S-video input of a
TV/monitor.
Use a 3-core AV cable to connect the component outputs of this unit to the corresponding
inputs of a TV/monitor.
Composite Video
Use the cable with yellow plug of an AV cable to connect the composite video output of this
unit to the video input of a TV/monitor.
-10-
Notes:
Dont make all the connections above at one time, otherwise the produced pictures will be
affected.
Only when the video settings conform to the actual video system connections does the
player produce the corresponding video output. (Please refer to the Video Setup in System
Setup chapter).
Of the video outputs above, component is the best, S-VIDEO is good and the composite
video is standard. Use the best available video connection.
DVD Player Video Output
TV/Monitor Video Input
Component Video Input
Connections
VIDEO SYSTEM CONNECTION
Component Video
The following video outputs are available for this unit.
S-Video
Use an S-Video cable to connect the S-Video output of this unit to the S-video input of a
TV/monitor.
Use a 3-core AV cable to connect the component outputs of this unit to the corresponding
inputs of a TV/monitor.
Composite Video
Use the cable with yellow plug of an AV cable to connect the composite video output of this
unit to the video input of a TV/monitor.
-10-
Notes:
Dont make all the connections above at one time, otherwise the produced pictures will be
affected.
Only when the video settings conform to the actual video system connections does the
player produce the corresponding video output. (Please refer to the Video Setup in System
Setup chapter).
Of the video outputs above, component is the best, S-VIDEO is good and the composite
video is standard. Use the best available video connection.
DVD Player Video Output
TV/Monitor Video Input
Component Video Input
Y
Connections
VIDEO SYSTEM CONNECTION
Component Video
The following video outputs are available for this unit.
S-Video
Use an S-Video cable to connect the S-Video output of this unit to the S-video input of a
TV/monitor.
Use a 3-core AV cable to connect the component outputs of this unit to the corresponding
inputs of a TV/monitor.
Composite Video
Use the cable with yellow plug of an AV cable to connect the composite video output of this
unit to the video input of a TV/monitor.
-10-
Notes:
Dont make all the connections above at one time, otherwise the produced pictures will be
affected.
Only when the video settings conform to the actual video system connections does the
player produce the corresponding video output. (Please refer to the Video Setup in System
Setup chapter).
Of the video outputs above, component is the best, S-VIDEO is good and the composite
video is standard. Use the best available video connection.
DVD Player Video Output
TV/Monitor Video Input
Component Video Input
Y
Connections
VIDEO SYSTEM CONNECTION
Component Video
The following video outputs are available for this unit.
S-Video
Use an S-Video cable to connect the S-Video output of this unit to the S-video input of a
TV/monitor.
Use a 3-core AV cable to connect the component outputs of this unit to the corresponding
inputs of a TV/monitor.
Composite Video
Use the cable with yellow plug of an AV cable to connect the composite video output of this
unit to the video input of a TV/monitor.
-10-
Notes:
Dont make all the connections above at one time, otherwise the produced pictures will be
affected.
Only when the video settings conform to the actual video system connections does the
player produce the corresponding video output. (Please refer to the Video Setup in System
Setup chapter).
Of the video outputs above, component is the best, S-VIDEO is good and the composite
video is standard. Use the best available video connection.
DVD Player Video Output
TV/Monitor Video Input
Component Video Input
Y
Connections
VIDEO SYSTEM CONNECTION
Component Video
The following video outputs are available for this unit.
S-Video
Use an S-Video cable to connect the S-Video output of this unit to the S-video input of a
TV/monitor.
Use a 3-core AV cable to connect the component outputs of this unit to the corresponding
inputs of a TV/monitor.
Composite Video
Use the cable with yellow plug of an AV cable to connect the composite video output of this
unit to the video input of a TV/monitor.
-10-
Notes:
Dont make all the connections above at one time, otherwise the produced pictures will be
affected.
Only when the video settings conform to the actual video system connections does the
player produce the corresponding video output. (Please refer to the Video Setup in System
Setup chapter).
Of the video outputs above, component is the best, S-VIDEO is good and the composite
video is standard. Use the best available video connection.
DVD Player Video Output
TV/Monitor Video Input
Component Video Input
Y
Connections
VIDEO SYSTEM CONNECTION
Component Video
The following video outputs are available for this unit.
S-Video
Use an S-Video cable to connect the S-Video output of this unit to the S-video input of a
TV/monitor.
Use a 3-core AV cable to connect the component outputs of this unit to the corresponding
inputs of a TV/monitor.
Composite Video
Use the cable with yellow plug of an AV cable to connect the composite video output of this
unit to the video input of a TV/monitor.
-10-
Notes:
Dont make all the connections above at one time, otherwise the produced pictures will be
affected.
Only when the video settings conform to the actual video system connections does the
player produce the corresponding video output. (Please refer to the Video Setup in System
Setup chapter).
Of the video outputs above, component is the best, S-VIDEO is good and the composite
video is standard. Use the best available video connection.
DVD Player Video Output
TV/Monitor Video Input
Component Video Input
Y
Y Pb/Cb Pr/Cr
Component Video Output
Connections
VIDEO SYSTEM CONNECTION
Component Video
The following video outputs are available for this unit.
S-Video
Use an S-Video cable to connect the S-Video output of this unit to the S-video input of a
TV/monitor.
Use a 3-core AV cable to connect the component outputs of this unit to the corresponding
inputs of a TV/monitor.
Composite Video
Use the cable with yellow plug of an AV cable to connect the composite video output of this
unit to the video input of a TV/monitor.
-10-
Notes:
Dont make all the connections above at one time, otherwise the produced pictures will be
affected.
Only when the video settings conform to the actual video system connections does the
player produce the corresponding video output. (Please refer to the Video Setup in System
Setup chapter).
Of the video outputs above, component is the best, S-VIDEO is good and the composite
video is standard. Use the best available video connection.
DVD Player Video Output
TV/Monitor Video Input
Component Video Input
Y
Y Pb/Cb Pr/Cr
Component Video Output
VIDEO
S-VIDEO
Connections
VIDEO SYSTEM CONNECTION
Component Video
The following video outputs are available for this unit.
S-Video
Use an S-Video cable to connect the S-Video output of this unit to the S-video input of a
TV/monitor.
Use a 3-core AV cable to connect the component outputs of this unit to the corresponding
inputs of a TV/monitor.
Composite Video
Use the cable with yellow plug of an AV cable to connect the composite video output of this
unit to the video input of a TV/monitor.
-10-
Notes:
Dont make all the connections above at one time, otherwise the produced pictures will be
affected.
Only when the video settings conform to the actual video system connections does the
player produce the corresponding video output. (Please refer to the Video Setup in System
Setup chapter).
Of the video outputs above, component is the best, S-VIDEO is good and the composite
video is standard. Use the best available video connection.
DVD Player Video Output
TV/Monitor Video Input
Component Video Input
Y
Y Pb/Cb Pr/Cr
Component Video Output
VIDEO
S-VIDEO
Connections
VIDEO SYSTEM CONNECTION
Component Video
The following video outputs are available for this unit.
S-Video
Use an S-Video cable to connect the S-Video output of this unit to the S-video input of a
TV/monitor.
Use a 3-core AV cable to connect the component outputs of this unit to the corresponding
inputs of a TV/monitor.
Composite Video
Use the cable with yellow plug of an AV cable to connect the composite video output of this
unit to the video input of a TV/monitor.
-10-
Notes:
Dont make all the connections above at one time, otherwise the produced pictures will be
affected.
Only when the video settings conform to the actual video system connections does the
player produce the corresponding video output. (Please refer to the Video Setup in System
Setup chapter).
Of the video outputs above, component is the best, S-VIDEO is good and the composite
video is standard. Use the best available video connection.
DVD Player Video Output
TV/Monitor Video Input
Component Video Input
Y
Y Pb/Cb Pr/Cr
Component Video Output
VIDEO
S-VIDEO
VIDEO
S-VIDEO
Composite Video
and S-Video Input
Composite Video
and S-Video Output
Pb/Cb
Pr/Cr
Stereo Audio
5.1 CH Audio
Use 3 pairs of audio cables to connect the 5.1 CH audio outputs of this unit to the 5.1 channel
inputs of external audio amplifiers or other players.
Coaxial Audio
Use a coaxial cable to connect the coaxial output of this unit to the coaxial input of a power
amplifier.
There are two types of audio output systems. They are analog audio output system and
digital audio output system.
Analog audio output system includes 2-channel stereo output and Dolby AC-3 5.1 channel
output. Digital audio output system includes coaxial output.
The audio settings should conform to the actual audio system connections. Please refer to
the Audio Setup in System Setup.
Use a pair of audio cable (white for left, red for right) to connect the stereo audio outputs of
this unit to the stereo inputs of a TV or a power amplifier.
Connections
-11-
Note:
AUDIO SYSTEM CONNECTION
R
L
Stereo Audio
5.1 CH Audio
Use 3 pairs of audio cables to connect the 5.1 CH audio outputs of this unit to the 5.1 channel
inputs of external audio amplifiers or other players.
Coaxial Audio
Use a coaxial cable to connect the coaxial output of this unit to the coaxial input of a power
amplifier.
There are two types of audio output systems. They are analog audio output system and
digital audio output system.
Analog audio output system includes 2-channel stereo output and Dolby AC-3 5.1 channel
output. Digital audio output system includes coaxial output.
The audio settings should conform to the actual audio system connections. Please refer to
the Audio Setup in System Setup.
Use a pair of audio cable (white for left, red for right) to connect the stereo audio outputs of
this unit to the stereo inputs of a TV or a power amplifier.
Connections
-11-
Note:
AUDIO SYSTEM CONNECTION
R
L
Stereo Audio
5.1 CH Audio
Use 3 pairs of audio cables to connect the 5.1 CH audio outputs of this unit to the 5.1 channel
inputs of external audio amplifiers or other players.
Coaxial Audio
Use a coaxial cable to connect the coaxial output of this unit to the coaxial input of a power
amplifier.
There are two types of audio output systems. They are analog audio output system and
digital audio output system.
Analog audio output system includes 2-channel stereo output and Dolby AC-3 5.1 channel
output. Digital audio output system includes coaxial output.
The audio settings should conform to the actual audio system connections. Please refer to
the Audio Setup in System Setup.
Use a pair of audio cable (white for left, red for right) to connect the stereo audio outputs of
this unit to the stereo inputs of a TV or a power amplifier.
Connections
-11-
Note:
AUDIO SYSTEM CONNECTION
R
L
L
R
Stereo Audio
5.1 CH Audio
Use 3 pairs of audio cables to connect the 5.1 CH audio outputs of this unit to the 5.1 channel
inputs of external audio amplifiers or other players.
Coaxial Audio
Use a coaxial cable to connect the coaxial output of this unit to the coaxial input of a power
amplifier.
There are two types of audio output systems. They are analog audio output system and
digital audio output system.
Analog audio output system includes 2-channel stereo output and Dolby AC-3 5.1 channel
output. Digital audio output system includes coaxial output.
The audio settings should conform to the actual audio system connections. Please refer to
the Audio Setup in System Setup.
Use a pair of audio cable (white for left, red for right) to connect the stereo audio outputs of
this unit to the stereo inputs of a TV or a power amplifier.
Connections
-11-
Note:
AUDIO SYSTEM CONNECTION
R
L
L
R
COAXIAL
COAXIAL
TV/Monitor/Amplifier Audio Input
DVD Audio Output
Stereo Audio
5.1 CH Audio
Use 3 pairs of audio cables to connect the 5.1 CH audio outputs of this unit to the 5.1 channel
inputs of external audio amplifiers or other players.
Coaxial Audio
Use a coaxial cable to connect the coaxial output of this unit to the coaxial input of a power
amplifier.
There are two types of audio output systems. They are analog audio output system and
digital audio output system.
Analog audio output system includes 2-channel stereo output and Dolby AC-3 5.1 channel
output. Digital audio output system includes coaxial output.
The audio settings should conform to the actual audio system connections. Please refer to
the Audio Setup in System Setup.
Use a pair of audio cable (white for left, red for right) to connect the stereo audio outputs of
this unit to the stereo inputs of a TV or a power amplifier.
Connections
-11-
Note:
AUDIO SYSTEM CONNECTION
R
L
L
R
COAXIAL
COAXIAL
TV/Monitor/Amplifier Audio Input
DVD Audio Output
Stereo Audio
5.1 CH Audio
Use 3 pairs of audio cables to connect the 5.1 CH audio outputs of this unit to the 5.1 channel
inputs of external audio amplifiers or other players.
Coaxial Audio
Use a coaxial cable to connect the coaxial output of this unit to the coaxial input of a power
amplifier.
There are two types of audio output systems. They are analog audio output system and
digital audio output system.
Analog audio output system includes 2-channel stereo output and Dolby AC-3 5.1 channel
output. Digital audio output system includes coaxial output.
The audio settings should conform to the actual audio system connections. Please refer to
the Audio Setup in System Setup.
Use a pair of audio cable (white for left, red for right) to connect the stereo audio outputs of
this unit to the stereo inputs of a TV or a power amplifier.
Connections
-11-
Note:
AUDIO SYSTEM CONNECTION
R
L
L
R
COAXIAL
COAXIAL
TV/Monitor/Amplifier Audio Input
DVD Audio Output
Stereo Audio
5.1 CH Audio
Use 3 pairs of audio cables to connect the 5.1 CH audio outputs of this unit to the 5.1 channel
inputs of external audio amplifiers or other players.
Coaxial Audio
Use a coaxial cable to connect the coaxial output of this unit to the coaxial input of a power
amplifier.
There are two types of audio output systems. They are analog audio output system and
digital audio output system.
Analog audio output system includes 2-channel stereo output and Dolby AC-3 5.1 channel
output. Digital audio output system includes coaxial output.
The audio settings should conform to the actual audio system connections. Please refer to
the Audio Setup in System Setup.
Use a pair of audio cable (white for left, red for right) to connect the stereo audio outputs of
this unit to the stereo inputs of a TV or a power amplifier.
Connections
-11-
Note:
AUDIO SYSTEM CONNECTION
R
L
L
R
COAXIAL
COAXIAL
TV/Monitor/Amplifier Audio Input
DVD Audio Output
Stereo Audio
5.1 CH Audio
Use 3 pairs of audio cables to connect the 5.1 CH audio outputs of this unit to the 5.1 channel
inputs of external audio amplifiers or other players.
Coaxial Audio
Use a coaxial cable to connect the coaxial output of this unit to the coaxial input of a power
amplifier.
There are two types of audio output systems. They are analog audio output system and
digital audio output system.
Analog audio output system includes 2-channel stereo output and Dolby AC-3 5.1 channel
output. Digital audio output system includes coaxial output.
The audio settings should conform to the actual audio system connections. Please refer to
the Audio Setup in System Setup.
Use a pair of audio cable (white for left, red for right) to connect the stereo audio outputs of
this unit to the stereo inputs of a TV or a power amplifier.
Connections
-11-
Note:
AUDIO SYSTEM CONNECTION
R
L
L
R
COAXIAL
COAXIAL
TV/Monitor/Amplifier Audio Input
DVD Audio Output
Stereo Audio
5.1 CH Audio
Use 3 pairs of audio cables to connect the 5.1 CH audio outputs of this unit to the 5.1 channel
inputs of external audio amplifiers or other players.
Coaxial Audio
Use a coaxial cable to connect the coaxial output of this unit to the coaxial input of a power
amplifier.
There are two types of audio output systems. They are analog audio output system and
digital audio output system.
Analog audio output system includes 2-channel stereo output and Dolby AC-3 5.1 channel
output. Digital audio output system includes coaxial output.
The audio settings should conform to the actual audio system connections. Please refer to
the Audio Setup in System Setup.
Use a pair of audio cable (white for left, red for right) to connect the stereo audio outputs of
this unit to the stereo inputs of a TV or a power amplifier.
Connections
-11-
Note:
AUDIO SYSTEM CONNECTION
R
L
L
R
COAXIAL
COAXIAL
TV/Monitor/Amplifier Audio Input
DVD Audio Output
Stereo Audio
5.1 CH Audio
Use 3 pairs of audio cables to connect the 5.1 CH audio outputs of this unit to the 5.1 channel
inputs of external audio amplifiers or other players.
Coaxial Audio
Use a coaxial cable to connect the coaxial output of this unit to the coaxial input of a power
amplifier.
There are two types of audio output systems. They are analog audio output system and
digital audio output system.
Analog audio output system includes 2-channel stereo output and Dolby AC-3 5.1 channel
output. Digital audio output system includes coaxial output.
The audio settings should conform to the actual audio system connections. Please refer to
the Audio Setup in System Setup.
Use a pair of audio cable (white for left, red for right) to connect the stereo audio outputs of
this unit to the stereo inputs of a TV or a power amplifier.
Connections
-11-
Note:
AUDIO SYSTEM CONNECTION
R
L
L
R
COAXIAL
COAXIAL
TV/Monitor/Amplifier Audio Input
DVD Audio Output
FR
SR
CEN
FL
SL
SW
5.1 CH AUDIO OUT5.1 CH AUDIO OUT
2CH Audio Output
2CH Audio Input
5.1 CH Audio Output
5.1 CH Audio Input
Digital Audio Output
Digital Audio Input
AC POWER CONNECTION
After checking all the connections have been made correctly,plug the AC power lead of this
unit into the wall socket.
NOTE:
Unplug the AC power lead from the wall socket if the unit will not be in use for a prolonged
period of time.
1. Press [SETUP] on the remote control to show the setup menu.
2. Press [ ]/[ ] to select an item. The submenu of the selected item will be displayed below
instantly.
3. Press [ ]/[ ] to select an item you desire to set in the submenu, then press [ENTER] /
[ ]to enter. Use [ ]/[ ] to select an option, then press [ENTER] to confirm it, or press [ ] to
cancel.
4. Then you can press [ ]/[ ] to continue to set other items in the submenu.
5. Press [ ] to go back to the superior menu of the current one.
6. Press [SETUP] again to exit the setup menu. Alternately, move the high light to ,
then press [ENTER] to exit the setup menu.
Menu Operation
System Setup
1 GENERAL SETUP PAGE
1.1 TV DISPLAY
If the unit is connected to a conventional TV set, you are supposed to select 4:3 PANSCAN
or 4:3 LETTERBOX.
4:3 PANSCAN: The wide-screen image will be displayed on the screen in its native aspect
ratio with some part on the left and right cut off.
4:3 LETTERBOX:
1.2 ANGLE MARK
Set this item to ON. When a disc encoded with multiple camera angles is playing, the angle
mark will display on the screen. Then you can view the video of different camera angles by
pressing [ANGLE] on the remote control.
Set this item to OFF to disable this function.
NOTE: This function only works with those discs encoded with multiple camera angles.
1.3 OSD LANGUAGE (On-Screen Display Language )
Set the on-screen display language in this item.
1.4 CLOSED CAPTIONS
Set this item to ON. When a disc encoded with closed captions, the closed captions will be
shown on the screen. Set this item to OFF to hide it.
You can also press [SUBTITLE] on the remote control to show or hide the closed captions.
NOTE: This function only works with those discs encoded with closed captions.
1.5 SCREEN SAVER
ON: If the image remains motionless on the screen, for example the disc is paused, stopped
etc, for several minutes, a screen saver will appear on the screen. You can press any key or
button except [STANDBY/ON] to wake it up.
OFF: Disable the screen saver function.
The 4:3 image will be displayed in full screen in its native aspect ratio.
The wide-screen image will be displayed in its native aspect ratio with
black bands on the upper and lower sections of the screen.
16: 9: If the unit is connected to a wide-screen TV set, you are supposed to select this option.
The wide-screen image will be displayed in full screen in its native aspect ratio while the 4:3
image will be stretched out horizontally to fit in the screen.
-12-
System Setup
1.6 LAST MEMORY
2 AUDIO SETUP PAGE
2.1 ANALOG AUDIO SETUP
2.1.1 DOWNMIX
LT/RT: The 5.1-channel audio is mixed into left channel and right channel and is output via
the FL and FR speaker respectively.
STEREO: The 5.1-channel audio is mixed into stereo signal and is output via the FL and FR
speaker.
3D SURROUND: This mode creates a virtual surround effect from stereo or multi-channel
audio contents.
5.1CH: Turn off the DOWNMIX mode. If the unit is connected to 5.1-channel amplifier, this
item should be selected.
NOTE: This function only applies to the Dolby AC -3 encoded 5.1-channel discs.
2.2. DIGITAL AUDIO SETUP
2.2.1 DIGITAL OUTPUT
SPDIF OFF: There will be no digital audio signal output. (Coaxial off)
SPDIF RAW: The digital audio signal output will be in its raw format.
SPDIF PCM: The digital audio signal output will be in PCM format.
SPDIF PCM
ON: During a playback or in the paused/stopped status each time you open the disc tray or
turn off the player, the unit will memorize the last playback time. Next time when you insert
the same disc and close the disc tray to load the disc, the unit will play from the memorized
point.
OFF: Disable the last memory function.
2.1.2 FRONT, CENTER, REAR SPEAKER and SUBWOOFER
Only when the DOWNMIX mode is turned off (DOWNMIX is set to 5.1CH) are the CENTER
SPEAKER and REAR SPEAKER activated. The FRONT SPEAKER can be set to LARGE or
SMALL. The CENTER SPEAKER, REAR SPEAKER can be set to LARGE, SMALL or OFF
and the SUBWOOFER can be set to ON or OFF.
NOTE:
If the speaker is set to LARGE, the output level will be higher than that of SMALL.
If the speaker is set to SMALL, the output level will be lower than that of LARGE.
If a speaker is set to OFF, no audio is outputted from it.
2.1.3 DIALOG
When DOWNMIX is set to LT/RT or STEREO, this item is available.
Adjust the value of this item to control the dialog volume.
NOTE: When playing 5.1CH disc, this item can be used to adjust the volume of the speakers.
2.1.4 D.R.C. (Dynamic Range Control)
You can set this item to AUTO, ON or OFF.
2.2.2 LPCM OUTPUT
When DIGITAL OUTPUT is set to , this item is available.
Select a sample rating for the digital audio output. There are two
options, 48KHz and 96KHz.
NOTE: Some amplifiers don't support 96KHz sampling which will affect the coaxial output.
-13-
System Setup
2.3 DOLBY DIGITAL SETUP
2.3.1 DUAL MONO
STEREO: The player outputs the left-channel audio and right-channel audio via the FL and
FR speaker respectively.
Use the direction key [ ]/[ to select a speaker, center speaker, subwoofer, left surround
speaker or right surround speaker. Then use the direction key [ ]/[ ] to set the distance
difference.
L-MONO: The player outputs the left-channel audio only via both the FL and FR speaker.
R- MONO: The player outputs the right-channel audio only via both the FL and FR speaker.
MIX- MONO: The player outputs the average signal of the left-channel and right-channel
audio via the FL speaker and the FR speaker
NOTE: This function only applies to the Dolby AC -3 encoded 2-channel discs.
2. 3.2 DYNAMIC
When you watch films with large dynamic scope in low volume, for example at night, you can
adjust the dynamic value up to avoid losing sound details resulting from the low volume.
2.4 CHANNEL DELAY
This item is used to set the delay time for the center, rear speakers and the subwoofer. The
delay is to compensate for the audio propagation time difference caused by the distance
difference of the speakers to the listener.
]
-14-
2.5 EQUALIZER
2.5.1 SOUND MODE
Select a sound mode in this item.
2.5.2 BASS BOOST
Set it to ON to boost the bass sound.
2.5.3 SUPER BASS
Set it to ON to get the super bass sound effect.
2.5.4 TREBLE BOOST
Set it to ON to boost the treble sound.
NOTE:
The unit does not support delays for when the distance
between the center or surround speakers and the listener are
longer than that between the front speakers and the listener.
In case the channel delay settings cannot match your speaker
configuration, please set all distance difference to 0cm.
0cm
Sub
woofer
2.6 3D PROCESSING
3D processing provides a virtual surround sound experience using just two speakers.
2.6.1 PRO LOGIC II
Pro Logic II: This unit allows you to configure Dolby Pro Logic II to expand 2-channel source
audio into full -channel surround sound.
NOTE: Pro Logic II functionality is effective only when DOWNMIX is set to 5.1CH and
is set to SPDIF RAW.
2.6.1.1 PRO LOGIC II
This item is used to turn on or off the Pro Logic II processing.
ON: Pro Logic II processing is always on.
OFF: Pro Logic II processing is disabled
AUTO: Pro Logic II processing is on only when Dolby Pro Logic II encoded content is
detected.
NOTE: When the Pro Logic II processing is turned off, all the following items (MODE,
PANORAMA, DIMENSION and CENTER WIDTH) are unavailable.
2.6.1.2 MODE
This item is used to set the processing mode of Pro Logic II.
MUSIC: The surround experience is tailored for multi-channel music playback.
MOVIE: Emphasis is given to the center channel as two-channel audio is decoded and
played back into your 5.1 system.
PRO LOGIC: This activates decoding and processing of the original Dolby Pro Logic
processing with mono-surround channel. We recommend using the Dolby Pro Logic Movie
mode in lie of this 4-channel surround format.
AUTO: Automatically selects processing mode based on the input format.
2.6.1.3 PANORAMA
This item is used to turn on/off panorama mode and is available only when MODE is set to
MUSIC.
When panorama mode is turned on, the front stereo audio is partially fed into the surround
channels for an enveloping effect.
2.6.1.4 DIMENSION
This item is available only when MODE is set to MUSIC.
This item allows gradual adjustment of the sound field either towards the front or towards the
rear. This is useful in setting a more even balance from all speakers with some rooms.
2.6.1.5 CENTER WIDTH
This item is available only when MODE is set to MUSIC.
This item can be used to control the width of the center channel sound effect by blending the
center speaker to the left and right speakers. As the level number increases, the center
channel sound moves toward the left and right speakers.
2.6.2 REVERB MODE
You can select a reverb mode in this item.
5.1
DIGITAL OUTPUT
-15-
System Setup
2.7 HDCD(High Definition Compatible digital)
HDCD (High Definition Compatible digital) is a patented encode/decode process for
delivering the full richness and details of the sound from HDCD-encoded CDs.
2.7.1 FILTER
You can select the digital filter at 2x, 1x or off.
3 VIDEO SETUP PAGE
3.1 VIDEO OUTPUT
S-VIDEO: Set video output to S-Video if the S-Video connection is made.
YCbCr: Set video output in analog component video format if the component video outputs
are used.
YPbPr: Set video output as progressive YUV signals if the component video outputs are used.
NOTE: If the video setting differs from the physical video connection, the TV set may have no
picture. You can press [V-MODE] on the remote control repeatedly to switch to an
appropriate video output mode.
3.2 COLOR SETTING
3.2.1 SHARPNESS
There are three options (HIGH, MEDIUM and LOW) for you to choose in this item.
3.2.2 BRIGHTNESS, CONTRAST, HUE and SATURATION
Enter these items respectively, use direction key [ ]/[ ] to adjust the value, then press
[ENTER] to confirm it.
3.2.3 GAMMA
There are four options (HIGH, MEDIUM, LOW and NONE) for you to choose in this item.
3.2.4 LUMA DELAY
There are two options (0T and 1T) for you to choose in this item.
4 PREFERENCE PAGE
If there's no disc in the disc tray, the disc tray is open or the disc in the disc tray is stopped,
this item is available.
4.1 TV TYPE
This product supports both NTSC (National Television System Committee) and PAL (Phase
Alternating Line) television broadcasting standards.
PAL: If the connected TV is PAL system , select this mode. The video signal of a NTSC disc
will be output in PAL format.
MULTI: If the connected TV is multi system, select this mode. The output format of video
signal will be in accordance with the video signal of the disc.
NTSC: If the connected TV is NTSC system , select this mode. The video signal of a PAL disc
will be output in NTSC format.
NOTE: If a wrong selection is made, the viewing image will be very poor. In such case, you
are supposed to change the option in this item to fix the error.
4.2 PBC (Play Back Control)
ON: Activate the PBC function.
OFF: Disable the PBC function.
You can also press [MENU] to activate/disable the PBC function.
NOTE: This function only works with those discs encoded with PBC function such as VCD 2.0,
SVCD, etc.
DVD, VCD1.1, CD-DA and MP3 disc have no PBC menu.
-16-
System Setup
4.3 AUDIO, SUBTITLE and DISC MENU
Select a preferred audio language, subtitle language and disc menu language in these items.
You can also make selection of the audio language by using the [AUDIO] and the subtitle
language by the [SUBTITLE] on the remote control.
NOTE: If the selected language is not available for the currently playing disc, the disc's
default audio, subtitle, disc menu language setting works.
4.4 PARENTAL
This item allows the user to set a maximum rating of the movies that can be viewed. Movies
rated higher than the set level can not be viewed without inputting the correct keywords.
What's more, to key in the correct password is needed to reset the level. The default
password is 136900.
NOTE: This function only works with those discs with parental function.
4.5 DEFAULT
Restore all the default settings except the settings in PARENTAL item and PASSWORD
SETUP PAGE.
5 PASSWORD SETUP PAGE
5.1 PASSWORD MODE
5.2 PASSWORD
You can reset the password in this item.
NOTE: The default password (136900) is always active even if the password has been reset.
So if you forget your reset password, use it.
You can switch on/off the password function in this item.
NOTE: You must key in the correct password and press [ENTER] to confirm before you
change the option in this item. The default password is 136900.
System Setup
-17-
-18-
Basic Playback
MP3 DISC PLAYBACK
Insert an nto the player, then a content menu will display on the screen.
MENU OPERATION:
Use the direction key [ ]/[ ] to select a folder or a file, then press [ENTER] to enter the
selected folder or play the selected file. You can also use the digit keys to make selection of a
folder to enter or a file to play.
In the content menu, press [ ] to return to the upper menu; press [ ]/[ ] to turn over to the
previous/next the menu page.
NOTE: During playback, [ ], [ ], [ ], [ ], [ ](press to stop the playback), [REPEAT], [A-B],
[VOLUME+/-], [MUTE], etc. are valid. Please refer to the remote control function introduction
for details.
MP3 disc i
[PROG]: Press repeatedly to switch between FOLDER mode and FILELIST mode.
Insert a USB drive in the USB port, then press [USB] to enter the connected USB drive and
you can playback the readable files in it. Press [USB] again to switch back to DVD mode.
In case the player breaks down when you insert a USB drive into the player, turn off the
player, disconnect the power cord from the AC outlet and unplug the USB drive from the
player. Then, power on the player again. The player will resume the normal status.
The connected USB drive is probably not a certified one. The player cannot play any
uncertified USB drive .
For playback operation, please refer to in this chapter.
NOTE:
MP3 DISC PLAYBACK
USB DRIVE PLAYBACK
Load a Disc
Press [OPEN/CLOSE] to open the disc tray.Insert a disc with the label-side up,then press
[OPEN/CLOSE] again to close the disc tray.
If a single-sided disc is inserted upside-down,the disc tray will open automatically,if not,the
unit will display “NO DISC”.
USB MEMORY DEVICE OPERATION
IMPORTANT INFORMATIONS
- Copyright protection files cannot be played back.
- Copyright protection files on the USB memory
device are skipped automatically when played
back.
- Recommended use:
Flash memory type USB memory player
- Not recommended:
Hard disc memory type USB player
- Some Flash memory player will not play
successfully with this uint.
Basic Playback
PICTURE CD PLAYBACK
Place a in the disc tray, then the unit will load the disc automatically(the
maximum size of the picture should be less than 8900*8900 pixels).
Press [ ] to enter the thumbnail mode to preview the pictures.
In the thumbnail mode, use the direction keys to select a picture, then press [ENTER] to
start the playback from the selected picture.
In the thumbnail mode, use the direction keys and [ENTER] to make selection of Slide
Show, Menu, Prev or Next at the bottom of the screen.
Slide Show: Start slide show playback.
Menu: Enter the instruction menu for remote key function. In the menu, press [ENTER] to
turn over to the next menu page and again to exit the instruction menu.
Prev/Next: Turn over to the previous/next page.
Remote key function introduction:
[PROG]: Switch the transition effects(wipe top,wipe bottom,wipe left,wipe right,etc.)
[ ]: Enter the thumbnail mode to preview the pictures.
[ZOOM]: During playback, press [ZOOM], then press [ ]/[ ] to zoom in/out the picture.
When the picture is zoomed in, the direction keys can be used to move the picture. Press
[ZOOM] again to exit the zooming mode.
[ ]/[ ]: Press to skip to the previous/next picture during playback.
[ ]: Press to pause a playback. Press again or press [ ] to resume the playback.
[ ]: Press to start a playback or resume to the normal playback.
[ ]/[ ]: Press to rotate the picture counterclockwise/ clockwise during the playback.
[ ]/[ ]: Press to create a vertical/horizontal mirror image.
picture CD
-19-
MP3/CD OPERATION
IMPORTANT INFORMATIONS
- Copyright protection files cannot be
played back.
- Copyright protection files on a disc are
skipped automatically when played back.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23

Sanyo DVD-DX517 Manuale utente

Categoria
Lettori DVD
Tipo
Manuale utente

in altre lingue