Yamaha YDPS52B Manuale utente

Marca: Yamaha

Modello: YDPS52B

Categoria: Apparecchiature musicali supplementari

Tipo: Manuale utente

Questo manuale è adatto anche per

YDP-S52

Owner’s Manual

Mode d’emploi

Manual de instrucciones

Before using the instrument, be sure to read “PRECAUTIONS” on pages 5-7.

For information on assembling the instrument, refer to the instructions at the end of this

manual.

Avant d’utiliser l’instrument, lisez attentivement la section « PRÉCAUTIONS D’USAGE »

aux pages 5 et 7.

Pour plus d’informations sur l’assemblage de l’instrument, reportez-vous aux instructions

figurant à la fin de ce manuel.

Antes de utilizar el instrumento, lea las “PRECAUCIONES”, en las páginas 5-7.

Para obtener más información sobre el montaje del instrumento, consulte las

instrucciones que encontrará al final de este manual.

EnglishFrançaisEspañol

YDP

S52

Digital Piano / Piano Numérique / Piano Digital

YDP-S52 Owner’s Manual

SPECIAL MESSAGE SECTION

This product utilizes batteries or an external power supply

(adapter). DO NOT connect this product to any power supply

or adapter other than one described in the manual, on the

name plate, or specifically recommended by Yamaha.

WARNING:

Do not place this product in a position where

anyone could walk on, trip over, or roll anything over power or

connecting cords of any kind. The use of an extension cord is

not recommended! If you must use an extension cord, the

minimum wire size for a 25' cord (or less) is 18 AWG. NOTE:

The smaller the AWG number, the larger the current handling

capacity. For longer extension cords, consult a local

electrician.

This product should be used only with the components

supplied or; a cart, rack, or stand that is recommended by

Yamaha. If a cart, etc., is used, please observe all safety

markings and instructions that accompany the accessory

product.

SPECIFICATIONS SUBJECT TO CHANGE:

The information contained in this manual is believed to be

correct at the time of printing. However, Yamaha reserves the

right to change or modify any of the specifications without

notice or obligation to update existing units.

This product, either alone or in combination with an amplifier

and headphones or speaker/s, may be capable of producing

sound levels that could cause permanent hearing loss. DO

NOT operate for long periods of time at a high volume level or

at a level that is uncomfortable. If you experience any hearing

loss or ringing in the ears, you should consult an audiologist.

IMPORTANT: The louder the sound, the shorter the time period

before damage occurs.

Some Yamaha products may have benches and/or accessory

mounting fixtures that are either supplied with the product or

as optional accessories. Some of these items are designed to

be dealer assembled or installed. Please make sure that

benches are stable and any optional fixtures (where

applicable) are well secured BEFORE using.

Benches supplied by Yamaha are designed for seating only.

No other uses are recommended.

NOTICE:

Service charges incurred due to a lack of knowledge relating

to how a function or effect works (when the unit is operating as

designed) are not covered by the manufacturer’s warranty,

and are therefore the owners responsibility. Please study this

manual carefully and consult your dealer before requesting

service.

ENVIRONMENTAL ISSUES:

Yamaha strives to produce products that are both user safe

and environmentally friendly. We sincerely believe that our

products and the production methods used to produce them,

meet these goals. In keeping with both the letter and the spirit

of the law, we want you to be aware of the following:

Battery Notice:

This product MAY contain a small non-rechargeable battery

which (if applicable) is soldered in place. The average life

span of this type of battery is approximately five years. When

replacement becomes necessary, contact a qualified service

representative to perform the replacement.

This product may also use “household” type batteries. Some

of these may be rechargeable. Make sure that the battery

being charged is a rechargeable type and that the charger is

intended for the battery being charged.

When installing batteries, never mix old batteries with new ones,

and never mix different types of batteries. Batteries MUST be

installed correctly. Mismatches or incorrect installation may

result in overheating and battery case rupture.

Warning:

Do not attempt to disassemble, or incinerate any battery. Keep

all batteries away from children. Dispose of used batteries

promptly and as regulated by the laws in your area. Note:

Check with any retailer of household type batteries in your

area for battery disposal information.

Disposal Notice:

Should this product become damaged beyond repair, or for

some reason its useful life is considered to be at an end,

please observe all local, state, and federal regulations that

relate to the disposal of products that contain lead, batteries,

plastics, etc. If your dealer is unable to assist you, please

contact Yamaha directly.

NAME PLATE LOCATION:

The name plate is located on the bottom of the product. The

model number, serial number, power requirements, etc., are

located on this plate. You should record the model number,

serial number, and the date of purchase in the spaces

provided below and retain this manual as a permanent record

of your purchase.

Model

Serial No.

Purchase Date

PLEASE KEEP THIS MANUAL

92-BP (bottom)

For YDP-S52

YDP-S52 Owner’s Manual

1. IMPORTANT NOTICE: DO NOT MODIFY THIS

UNIT!

This product, when installed as indicated in the instruc-

tions contained in this manual, meets FCC requirements.

Modifications not expressly approved by Yamaha may

void your authority, granted by the FCC, to use the prod-

uct.

2. IMPORTANT: When connecting this product to accesso-

ries and/or another product use only high quality shielded

cables. Cable/s supplied with this product MUST be used.

Follow all installation instructions. Failure to follow instruc-

tions could void your FCC authorization to use this prod-

uct in the USA.

3. NOTE: This product has been tested and found to com-

ply with the requirements listed in FCC Regulations, Part

15 for Class “B” digital devices. Compliance with these

requirements provides a reasonable level of assurance

that your use of this product in a residential environment

will not result in harmful interference with other electronic

devices. This equipment generates/uses radio frequen-

cies and, if not installed and used according to the instruc-

tions found in the users manual, may cause interference

harmful to the operation of other electronic devices. Com-

pliance with FCC regulations does not guarantee that

interference will not occur in all installations. If this product

is found to be the source of interference, which can be

determined by turning the unit “OFF” and “ON”, please try

to eliminate the problem by using one of the following

measures:

Relocate either this product or the device that is being

affected by the interference.

Utilize power outlets that are on different branch (circuit

breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient

the antenna. If the antenna lead-in is 300 ohm ribbon

lead, change the lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory

results, please contact the local retailer authorized to dis-

tribute this type of product. If you can not locate the

appropriate retailer, please contact Yamaha Corporation

of America, Electronic Service Division, 6600 Orangetho-

rpe Ave, Buena Park, CA90620

The above statements apply ONLY to those products dis-

tributed by Yamaha Corporation of America or its subsid-

iaries.

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)

FCC INFORMATION (U.S.A.)

* This applies only to products distributed by

YAMAHA CORPORATION OF AMERICA.

COMPLIANCE INFORMATION STATEMENT

(DECLARATION OF CONFORMITY

PROCEDURE)

Responsible Party : Yamaha Corporation of America

Address : 6600 Orangethorpe Ave.,

Buena Park, Calif. 90620

Telephone : 714-522-9011

Type of Equipment : Digital Piano

Model Name : YDP-S52

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received

including interference that may cause undesired opera-

tion.

See user manual instructions if interference to radio recep-

tion is suspected.

(FCC DoC)

For YDP-S52

For AC adaptor and YDP-S52

YDP-S52 Owner’s Manual

The above warning is located on the bottom of the unit.

Explanation of Graphical Symbols

The lightning flash with arrowhead symbol

within an equilateral triangle is intended to

alert the user to the presence of uninsulated

“dangerous voltage” within the product’s

enclosure that may be of sufficient

magnitude to constitute a risk of electric

shock to persons.

The exclamation point within an

equilateral triangle is intended to alert the

user to the presence of important operating

and maintenance (servicing) instructions in

the literature accompanying the product.

IMPORTANT SAFETY INSTRUCTIONS

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8 Do not install near any heat sources such as

radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

9 Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding

type plug has two blades and a third grounding

prong. The wide blade or the third prong are

provided for your safety. If the provided plug does

not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10 Protect the power cord from being walked on or

pinched particularly at plugs, convenience

receptacles, and the point where they exit from the

apparatus.

11 Only use attachments/accessories specified by

the manufacturer.

12 Use only with the cart,

stand, tripod, bracket, or

table specified by the

manufacturer, or sold with

the apparatus. When a cart

is used, use caution when

moving the cart/apparatus

combination to avoid injury

from tip-over.

13 Unplug this apparatus during lightning storms or

when unused for long periods of time.

14 Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has

been damaged in any way, such as power-supply

cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

(UL60065_03)

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR

MOISTURE.

This device complies with Part 15 of the FCC Rules. Oper-

ation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2)

this device must accept any interference received, includ-

ing interference that may cause undesired operation.

(fcc_sengen-C)

CAN ICES-3 (B)/NMB-3(B)

• This applies only to products distributed by Yamaha Canada

Music Ltd.

• Ceci ne s’applique qu’aux produits distribués par Yamaha

Canada Musique Ltée.

(can_b_01)

For AC adaptor

YDP-S52 Owner’s Manual

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

Please keep this manual in a safe and handy place for future reference.

WARNING

• This AC adaptor is designed for use with only Yamaha electronic instruments. Do

not use for any other purpose.

• Indoor use only. Do not use in any wet environments.

CAUTION

• When setting up, make sure that the AC outlet is easily accessible. If some

trouble or malfunction occurs, immediately turn off the power switch of the

instrument and disconnect the AC adaptor from the outlet. When the AC adaptor

is connected to the AC outlet, keep in mind that electricity is flowing at the

minimum level, even if the power switch is turned off. When you are not using

the instrument for a long time, make sure to unplug the power cord from the wall

AC outlet.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical

shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the

following:

• Do not place the power cord near heat sources such as heaters or radiators. Also,

do not excessively bend or otherwise damage the cord, or place heavy objects on

it.

• Only use the voltage specified as correct for the instrument. The required voltage

is printed on the name plate of the instrument.

• Use the specified adaptor (page 33) only. Using the wrong adaptor can result in

damage to the instrument or overheating.

• Check the electric plug periodically and remove any dirt or dust which may have

accumulated on it.

• This instrument contains no user-serviceable parts. Do not open the instrument

or attempt to disassemble or modify the internal components in any way. If it

should appear to be malfunctioning, discontinue use immediately and have it

inspected by qualified Yamaha service personnel.

• Do not expose the instrument to rain, use it near water or in damp or wet

conditions, or place on it any containers (such as vases, bottles or glasses)

containing liquids which might spill into any openings. If any liquid such as

water seeps into the instrument, turn off the power immediately and unplug the

power cord from the AC outlet. Then have the instrument inspected by qualified

Yamaha service personnel.

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit. A burning item may fall

over and cause a fire.

• When one of the following problems occur, immediately turn off the power switch

and disconnect the electric plug from the outlet. Then have the device inspected

by Yamaha service personnel.

- The power cord or plug becomes frayed or damaged.

- It emits unusual smells or smoke.

- Some object has been dropped into the instrument.

- There is a sudden loss of sound during use of the instrument.

For AC adaptor

For YDP-S52

Power supply/AC adaptor

Do not open

Water warning

Fire warning

If you notice any abnormality

DMI-5 1/2

YDP-S52 Owner’s Manual

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage

to the instrument or other property. These precautions include, but are not limited to, the following:

• Do not connect the instrument to an electrical outlet using a multiple-connector.

Doing so can result in lower sound quality, or possibly cause overheating in the

outlet.

• When removing the electric plug from the instrument or an outlet, always hold

the plug itself and not the cord. Pulling by the cord can damage it.

• Remove the electric plug from the outlet when the instrument is not to be used for

extended periods of time, or during electrical storms.

• Read carefully the attached documentation explaining the assembly process.

Failure to assemble the instrument in the proper sequence might result in

damage to the instrument or even injury.

• Be sure to attach the anti-fall brackets to the instrument, to ensure stability.

Failure to do so might result in damage to the instrument or even injury.

• Do not place the instrument in an unstable position where it might accidentally

fall over.

• When transporting or moving the instrument, always use two or more people.

Attempting to lift the instrument by yourself may damage your back, result in

other injury, or cause damage to the instrument itself.

• Before moving the instrument, remove all connected cables, to prevent damage

to the cables or injury to anyone who might trip over them.

• When setting up the product, make sure that the AC outlet you are using is easily

accessible. If some trouble or malfunction occurs, immediately turn off the power

switch and disconnect the plug from the outlet. Even when the power switch is

turned off, electricity is still flowing to the product at the minimum level. When

you are not using the product for a long time, make sure to unplug the power

cord from the wall AC outlet.

• Use only the stand specified for the instrument. When attaching it, use the

provided screws only. Failure to do so could cause damage to the internal

components or result in the instrument falling over.

• Before connecting the instrument to other electronic components, turn off the

power for all components. Before turning the power on or off for all components,

set all volume levels to minimum.

• Be sure to set the volumes of all components at their minimum levels and

gradually raise the volume controls while playing the instrument to set the

desired listening level.

• Do not insert a finger or hand in any gaps on the key cover or instrument. Also

take care that the key cover does not pinch your finger.

• Never insert or drop paper, metallic, or other objects into the gaps on the key

cover, panel or keyboard. This could cause physical injury to you or others,

damage to the instrument or other property, or operational failure.

• Do not rest your weight on, or place heavy objects on the instrument, and do not

use excessive force on the buttons, switches or connectors.

• Do not use the instrument/device or headphones for a long period of time at a

high or uncomfortable volume level, since this can cause permanent hearing

loss. If you experience any hearing loss or ringing in the ears, consult a

physician.

Always turn the power off when the instrument is not in use.

Even when the [ ] (Standby/On) switch is in standby status (power lamp is off), electricity is still flowing to the instrument at the minimum level.

When you are not using the instrument for a long time, make sure you unplug the power cord from the wall AC outlet.

Power supply/AC adaptor

Assembly

Location

Connections

Handling caution

Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.

DMI-5 2/2

YDP-S52 Owner’s Manual

NOTICE

To avoid the possibility of malfunction/ damage to the product,

damage to data, or damage to other property, follow the notices

below.

 Handling

• Do not use the instrument in the vicinity of a TV, radio,

stereo equipment, mobile phone, or other electric devices.

Otherwise, the instrument, TV, or radio may generate noise.

When you use the instrument along with an application on

your iPad, iPhone or iPod touch, we recommend that you set

“Airplane Mode” to “ON” on that device in order to avoid

noise caused by communication.

• Do not expose the instrument to excessive dust or

vibrations, or extreme cold or heat (such as in direct

sunlight, near a heater, or in a car during the day) to prevent

the possibility of panel disfiguration, damage to the internal

components or unstable operation. (Verified operating

temperature range: 5° – 40°C, or 41° – 104°F.)

• Do not place vinyl, plastic or rubber objects on the

instrument, since this might discolor the panel or keyboard.

 Maintenance

• When cleaning the instrument, use a soft and dry/slightly

damp cloth. Do not use paint thinners, solvents, alcohol,

cleaning fluids, or chemical-impregnated wiping cloths.

• During extreme changes in temperature or humidity,

condensation may occur and water may collect on the

surface of the instrument. If water is left, the wooden parts

may absorb the water and be damaged. Make sure to wipe

any water off immediately with a soft cloth.

• As with an acoustic piano, pedals may become tarnished

across the ages. When this occurs, polish the pedal with a

compound designed for piano pedals. Before using the

compound, make sure to read the instructions for proper

usage.

 Saving data

• Some of the data of this instrument (page 28) are retained

when the power is turned off. However, the saved data may

be lost due to some failure, an operation mistake, etc. Save

your important data onto an external device such as a

computer (page 28).

Information

 About copyrights

• Copying of the commercially available musical data

including but not limited to MIDI data and/or audio data is

strictly prohibited except for your personal use.

• This product incorporates and bundles contents in which

Yamaha owns copyrights or with respect to which Yamaha

has license to use others' copyrights. Due to copyright laws

and other relevant laws, you are NOT allowed to distribute

media in which these contents are saved or recorded and

remain virtually the same or very similar to those in the

product.

* The contents described above include a computer

program, Accompaniment Style data, MIDI data, WAVE

data, voice recording data, a score, score data, etc.

* You are allowed to distribute medium in which your

performance or music production using these contents is

recorded, and the permission of Yamaha Corporation is

not required in such cases.

 About functions/data bundled with the

instrument

• Some of the preset songs have been edited for length or

arrangement, and may not be exactly the same as the

original.

 About this manual

• The illustrations as shown in this manual are for

instructional purposes only, and may appear somewhat

different from those on your instrument.

• iPhone, iPad and iPod touch are trademarks of Apple Inc.,

registered in the U.S. and other countries.

• The company names and product names in this manual are

the trademarks or registered trademarks of their respective

companies.

 Tuning

• Unlike an acoustic piano, this instrument does not need to

be tuned by an expert (although the pitch can be user-

adjusted to match other instruments). This is because the

pitch of digital instruments is always maintained perfectly.

The model number, serial number, power requirements, etc., may be

found on or near the name plate, which is at the bottom of the unit.

You should note this serial number in the space provided below and

retain this manual as a permanent record of your purchase to aid iden-

tification in the event of theft.

Model No.

Serial No.

(bottom_en_01)

The name plate is located on the bottom of the unit.

YDP-S52 Owner’s Manual

Table of Contents

PRECAUTIONS .................................... 5

About the Manuals ................................ 9

Included Accessories ............................. 9

Panel Controls and Terminals.............10

Basic Operations

Setting Up.............................................11

Key Cover and Music Rest ......................................11

Turning the Power On.............................................12

Auto Power Off Function........................................13

Using Headphones ...................................................13

Playing the Piano..................................14

Setting the Volume...................................................14

Intelligent Acoustic Control (IAC)........................14

Using the Pedals........................................................15

Using the Damper Resonance ................................15

Setting the Operation Confirmation Sounds........16

Changing the Touch Sensitivity .............................16

Using the Metronome..............................................17

Advanced Operations

Playing Various Musical Instrument

Sounds (Voices)....................................18

Selecting a Voice.......................................................18

Listening to the Demo Songs ..................................19

Adding Variations to the Sound (Reverb) ............20

Transposing the Pitch in Semitones ......................21

Fine-tuning the Pitch ...............................................21

Layering Two Voices (Dual mode) ........................22

Playing Duo...............................................................23

Song Playback and Practice .................24

Listening to 50 Preset Songs....................................24

Practicing a One-Hand Part....................................25

Playing from the Top of the Bar Including a Rest or

Blank...........................................................................25

Recording Your Performance .............26

Recording Your Performance ................................ 26

Changing the Initial Settings of the Recorded Song

....................................................................................27

Deleting Recorded Data ..........................................27

Backing up Data and Initializing the

Settings................................................. 28

Data Maintained When Power is Turned Off...... 28

Saving the User Song data to a computer.............28

Transferring SMF Files Between a Computer and

this Instrument.........................................................28

Initializing the Settings............................................ 28

Appendix

Troubleshooting ..................................29

Keyboard Stand Assembly...................30

Specifications .......................................33

Index.....................................................34

YDP-S52 Owner’s Manual

Thank you for choosing the Yamaha digital piano.

In order to make the most of the performance potential and features of the instrument,

please read the manuals thoroughly, and keep them in a handy place for later reference.

About the Manuals

This instrument has the following manuals.

 Included Manuals

Owner’s Manual (this book)

Explains how to use the instrument.

Quick Operation Guide (separate

sheet)

Shows in chart form the functions assigned to the

buttons and the keyboard for quick

understanding.

 Online Manuals (PDF)

iPhone/iPad Connection Manual

Explains how to connect the instrument to a smart

device, such as iPhone, iPad.

Computer-related Operations

Includes instructions on connecting this

instrument to a computer, and operations related

to transferring song data.

MIDI Reference

Contains the MIDI Data Format and MIDI

Implementation chart, as well as descriptions on

MIDI functions such as MIDI channel and Local

Control settings.

MIDI Basics (only in English, French

and German)

Contains basic explanations about MIDI.

To obtain these manuals, access the Yamaha

Downloads website, select your country, enter

“YDP-S52” in the Model Name box, then click

[SEARCH].

Included Accessories

•Owner’s Manual (this book)

• Quick Operation Guide (separate sheet)

• “50 Greats for the Piano” (music book)

• Online Member Product Registration

•Warranty

•AC adaptor

•Power cord

*1 You will need the PRODUCT ID on the sheet in order

to fill out the User Registration form.

*2 May not be included depending on your particular

area. Please check with your Yamaha dealer.

Yamaha Downloads

http://download.yamaha.com/

Smart device application

– Digital Piano Controller

With the specially developed Digital Piano

Controller app running on your iPhone, iPad,

or iPod touch, you can remotely control your

digital piano for even more convenience and

flexibility. By presenting various parameters

on-screen, this app allows you to make

settings in a visual, more intuitive manner. For

more details on Digital Piano Controller, refer

to the following Yamaha web site.

http://yamaha.com/kbdapps/

For instructions on connecting the

instrument to a smart-device, refer to the

“iPhone/iPad Connection Manual.”

YDP-S52 Owner’s Manual

Panel Controls and Terminals

[ ] (Standby/On) switch......................... page 12

For turning the power on or setting to standby.

[MASTER VOLUME] knob ..................... page 14

For adjusting the volume of the entire sound.

[DEMO/SONG] button..................... pages 19, 24

For playing the Demo Songs and the Preset Songs.

[PIANO/VOICE] button............. pages 18, 20, 22

For selecting a single Voice, two Voices for layering or

a Reverb Type.

[METRONOME] button .......................... page 17

For starting or stopping the metronome.

[+R], [–L] buttons ....................... pages 18, 21, 25

• In general, these are for selecting the next or

previous Voice.

• During Song playback, these are for selecting the

next or previous Song, and (while holding down

[PLAY]) turning on/off the right-hand and left-

hand Parts individually.

• During Metronome playback, these are for

increasing or decreasing the Tempo.

[REC] button............................................ page 26

For recording your keyboard performance.

[PLAY] button.......................................... page 26

For playing back the recorded performance.

[FUNCTION] ................................... pages 16, 21

Simultaneously holding both the [DEMO/SONG]

and the [PIANO/VOICE] buttons and pressing a

specified key allows you to change various settings,

including MIDI, Transpose parameters, etc.

[PHONES] jacks....................................... page 13

For connecting a set of standard stereo headphones.

[USB TO HOST] terminal

For connecting to a computer or a smart device such

as iPhone or iPad. Refer to the online manual

“Computer-related Operations” for connection to a

computer. For instructions on using MIDI, refer to

the online manual “MIDI Reference” (page 9).

NOTICE

Use an AB type USB cable of less than 3 meters.

USB 3.0 cables cannot be used.

[TO PEDAL] jack ..................................... page 31

For connecting the pedal cord.

DC IN jack................................................ page 12

For connecting the AC adaptor.

Pedals ....................................................... page 15

For controlling expression and sustain, just as on an

acoustic piano.

TO PEDAL

16V

PHONES

Rear

(Keyboard side)

Bottom

(Keyboard side)

Bottom

Shows the DC IN and

[TO PEDAL] jacks as

seen when viewed from

the rear of the instrument.

YDP-S52 Owner’s Manual

Basic Operations

Setting Up

CAUTION

Hold the key cover with both hands when opening or closing it. Do not release it until it is fully opened or closed. Be careful to

avoid catching fingers (yours or others, especially children’s) between the key cover and main unit.

Opening the key cover

1. Hold the edge of the key cover top with both hands, then open the key cover slowly.

2. Fold down the front part of the key cover.

3. Unfold the music rest.

Closing the key cover

1. Fold the music rest.

2. Unfold the front part of the key cover.

3. Hold the key cover with both hands and close it slowly.

Key Cover and Music Rest

CAUTION

Be careful to avoid catching your fingers

when opening or closing the cover.

CAUTION

Be careful to avoid catching your fingers

when opening or closing the cover.

NOTICE

Before closing the key cover, be sure to fold

the music rest and unfold the front part of the

key cover.

Setting Up

YDP-S52 Owner’s Manual

1. Connect the plugs of the AC adaptor in the order shown in

the illustration.

WARNING

Use the specified adaptor (page 33) only. The use of other adaptors may result in irreparable

damage to both the adaptor and the instrument.

CAUTION

Remove the AC plug from the AC outlet when the instrument is not to be used for extended

periods of time, or during electrical storms.

NOTE

Follow this procedure in reverse order when disconnecting the AC adaptor.

2. Press the [ ] (Standby/On) switch to turn the power on.

Power indicator

If you close the key cover without turning the power to standby, the power

indicator remains lit, indicating that the power is still on.

When you’re ready to turn the power to standby, press the [ ](Standby/On)

switch again for a second. The power indicator turns off.

CAUTION

Even when the [ ] (Standby/On) switch is in the standby status, electricity is still flowing to the

instrument at a minimum level. When not using the instrument for an extended period of time, be

sure to unplug the power cord from the wall AC outlet.

Turning the Power On

Power cord

AC outlet

AC adaptor

DC IN jack (page 10)

The shape of the plug and outlet

differ depending on locale.

AC plug

DC plug

Power indicator

[ ] (Standby/On) switch

Setting Up

YDP-S52 Owner’s Manual

To prevent unnecessary power consumption, this instrument features an Auto

Power Off function that automatically turns the power off if the instrument is

not operated for approximately 30 minutes. If you do not want to use the Auto

Power Off function, disable the function as described below. The setting

(disabled or enabled) is retained even if the power is turned off.

Disabling the Auto Power Off function

When the instrument is turned off

While holding down the A-1 key (the lowest key), press the

[ ] (Standby/On) to turn the instrument on. The [REC]

indicator flashes three times, indicating the Auto Power

Off function has been disabled.

When the instrument is turned on

While holding down the [DEMO/SONG] and the

[PIANO/VOICE] simultaneously, press the A♯5 key.

Enabling the Auto Power Off function

While holding down the [DEMO/SONG] and the

[PIANO/VOICE] simultaneously, press the A5 key.

Since this instrument is equipped with two [PHONES] jacks, you can connect

two sets of standard stereo headphones. If you are using only one set of

headphones, insert a plug into either jack, which automatically shuts off the

speakers.

CAUTION

Do not use headphones at a high volume for an extended period of time; doing so may cause

hearing loss.

Reproducing a natural sense of distance (Stereophonic Optimizer)

The Stereophonic Optimizer gives you the feeling of playing an actual acoustic

piano — even though you’re listening through headphones. Normally, the

sound comes out from headphones sounds very close to your ears. However,

this Stereophonic Optimizer effect recreates a natural distance or the sense of

physical space between your ears and the instrument, just as when playing an

acoustic piano.

While holding down the [PIANO/VOICE],

press the A♯0 key to turn the function on.

Press the A0 key while holding down the

[PIANO/VOICE] to turn the function off.

Auto Power Off Function

Default setting:

Enable

Lowest key

Highest keyA♯5

Highest keyA5

Using Headphones

PHONES

Standard stereo phone plug

Bottom surface

A0: Off

Lowest key

A♯0: On

Default setting:

YDP-S52 Owner’s Manual

Playing the Piano

When you start playing, use the [MASTER VOLUME] knob to adjust the volume of the entire keyboard

sound.

CAUTION

Do not use this instrument at a high volume level for a long period of time, or your hearing may be damaged.

With this function, the sound quality of this instrument is automatically adjusted

and controlled according to the overall volume. Even when the volume is low,

this lets you hear both low sounds and high sounds clearly.

To tu rn on IAC:

While holding down [PIANO/VOICE],

press the F♯0 key.

To turn off IAC:

While holding down [PIANO/VOICE],

press the F0 key.

To adjust IAC Depth:

While holding down [PIANO/VOICE],

press one of the A-1 – D♯0 keys.

The higher the value, the more clearly that low and high sounds are heard at

lower volume levels.

Setting the Volume

Intelligent Acoustic Control (IAC)

Level decreases. Level increases.

Default setting:

F♯0Lowest key

F0Lowest key

C0: depth 0

(Default setting)

Lowest key

A-1: depth -3 D♯0: depth +3

Setting range:

A-1 (-3) – D♯0 (+3)

Default setting:

C0 (0)

Playing the Piano

YDP-S52 Owner’s Manual

Damper Pedal (Right)

Pressing this pedal will sustain notes longer.

Releasing this pedal immediately stops (damps)

any sustained notes. This pedal also features a

“half-pedal” function that creates partial sustain

effects, depending on how far down you press the

pedal.

Sostenuto Pedal (Center)

Pressing this pedal while holding the notes will

sustain the pressed notes (as if the Damper Pedal

had been pressed), but all subsequently played

notes will not be sustained. This makes it possible

to sustain a chord or single low note, for example,

while the other notes are played “staccato.”

Soft Pedal (Left)

Pressing this pedal will reduce the volume and slightly change the timbre of the

notes. The notes played before this pedal is pressed are not affected. When you

select the Jazz Organ Voice, pressing the left pedal switches between fast/slow

rotation of the rotary speaker (page 18).

The Damper Resonance effect simulates the sustain sound of the damper pedal on a grand piano, as if you

were pressing the damper pedal and playing the keyboard. This effect is applied to the entire sound of the

instrument.

To turn on the Damper Resonance:

While holding [PIANO/VOICE], press the G♯ 2 key.

To turn off the Damper Resonance:

While holding [PIANO/VOICE], press the G2 key.

Using the Pedals

When you press the damper

pedal here, this note and the

notes you play before you release

the pedal sustain longer.

When you press the sostenuto

pedal here while holding the

note, the note will sustain as

long as you hold the pedal.

NOTE

If the damper pedal doesn’t

work, make sure that the pedal

cord is properly plugged into

the main unit (page 31).

Half-pedal function

This function allows you to vary

the sustain length depending

on how far the pedal is

pressed. The farther down you

press the pedal, the more the

sound sustains. For example, if

you press the damper pedal

and all notes you are playing

sound a bit murky and loud

with too much sustain, you can

release the pedal half way or

higher to decrease the sustain

(murkiness).

NOTE

While the sostenuto pedal is

held, the organ and strings

Voices sound continuously

without decay after the notes

have been released.

Using the Damper Resonance

Default setting:

Lowest key G2

(Off)

G♯2

(On)

Playing the Piano

YDP-S52 Owner’s Manual

Because of the simple, piano-like design of this instrument, there are a minimum of panel controls, and most

settings are made using the keys of the keyboard. When you turn a function on or off, or change a setting, the

instrument produces a sound to confirm the change. There are three types of sounds used: an ascending

sound for on, a descending sound for off, and clicks for other settings. In the Metronome setting (page 17), a

numeric value is read out when a tempo is specified by a three-digit value using the keyboard.

For the list of functions assigned to the buttons and keys, see “Quick Operation Guide” (separate sheet).

Turning the Operation Confirmation Sounds on

Press the A♯-1 key while holding down the [DEMO/SONG] and the [PIANO/

VOICE] simultaneously.

Turning the Operation Confirmation Sounds off

Press the A-1 key while holding down the [DEMO/SONG] and the [PIANO/

VOICE] simultaneously.

You can specify the Touch Sensitivity (how the sound responds to the way you

play the keys).

While holding down [PIANO/VOICE], press one of the A6 – C7 keys.

Setting the Operation Confirmation Sounds

Default setting:

Lowest key A-1

(Off)

(On)

A♯-1

Changing the Touch Sensitivity

NOTE

This setting is disabled with

some Voices, such as an

organ sound.

Default setting:

B6 (Medium)

Key

Touch

Sensitivity

Description

A6 Fixed

The volume level does not change at all regardless of whether you

play the keyboard soft or hard.

A♯6Soft

The volume level does not change much when you play the

keyboard soft or hard.

B6 Medium This is the standard piano touch response.

C7 Hard

The volume level changes very widely from pianissimo to fortissimo

to facilitate dynamic and dramatic expression. You have to hit the

keys hard to produce a loud sound.

A6 Highest key (C7)

A♯6

Playing the Piano

YDP-S52 Owner’s Manual

The metronome feature is convenient for practicing with an accurate tempo.

1. Press [METRONOME] to start the Metronome.

2. Press [METRONOME] to stop the Metronome.

Selecting a Beat

While holding down [METRONOME], press one of the C3 – F3 keys.

Adjusting the Tempo

The Metronome tempo can be set from 5 to 280 beats per minute.

•To increase or decrease the value by 1:

While the metronome is playing, press [+R] to increase or [–L] to decrease.

Alternatively, press and hold down [METRONOME], and press the C♯5 key to

increase or B4 key to decrease.

•To increase or decrease the value by 10:

While holding down [METRONOME], press the D5 key to increase or the A♯4 key

to decrease.

•To specify a three-digit value:

While holding down [METRONOME], press the relevant C4 – A4 keys one by one

in order. For example to specify “95,” press the C4 (0), A4 (9) and F4 (5) keys in

order.

•Resetting the value to the default (120)

While holding down [METRONOME], press the [+R] and [–L] simultaneously, or

press the C5 key.

Adjusting the Volume

While holding down [METRONOME], press one of the keys between C1 and G2

to set the volume of the metronome. Pressing a higher key results in higher

volume, while pressing a lower key results in lower volume.

Using the Metronome

22447

13 3056 56

14 16 19

15 17 18 2013

024579

8631

C♯3

Highest key

D♯3

D3 E3 F3

A♯4

C♯5

A4 D5B4Lowest key C1 G2

Adjusting

the Volume

Selecting

a Beat

Adjusting

the Tempo

(Default

setting)

(Default

setting)

(Default

setting)

Default setting:

0 (C3)

Key Beat

C3 0

C♯32

D3 3

D♯34

E3 5

F3 6

Setting range:

C1 (1) – G2 (20)

Default setting:

D2 (15)

NOTE

A numeric value is read out

when a relevant key is

pressed.

YDP-S52 Owner’s Manual

Advanced Operations

Playing Various Musical Instrument Sounds (Voices)

To select “Grand Piano 1”:

Simply press [PIANO/VOICE].

To select another Voice:

After pressing [PIANO/VOICE], press [+R] or [–L] to select the next or previous

Voice.

To select a specific Voice:

While holding down [PIANO/VOICE], press one of the C1 – A1 keys. For details

on which Voice is assigned to each key, see the list below.

Voice List

Selecting a Voice

NOTE

To hear the characteristics of

the Voices, play back the

Demo Songs (page 19).

Key Voice Name Voice description

C1 Grand Piano 1

This sound was sampled from a full concert grand piano. It uses

different samples depending on the strength of your playing and

produces smoother tonal changes. Suitable not only for classical

compositions but also for piano pieces of any style.

C♯1 Grand Piano 2 Warm and soft piano sound. Good for playing ballads.

D1 Grand Piano 3

Bright piano sound. Clear tone helps the sound to “cut through”

when playing in an ensemble.

D♯1 E.Piano 1

An electronic piano sound created by FM synthesis. Good for

standard popular music.

E1 E.Piano 2

The sound of an electric piano using hammer-struck metallic

“tines.” Soft tone when played lightly, and an aggressive tone

when played hard.

F1 Harpsichord

The definitive instrument for baroque music. Since harpsichord

uses plucked strings, there is no touch response. There is,

however, a characteristic additional sound when the keys are

released.

F♯1 Vibraphone

Vibraphone played with relatively soft mallets. The tone becomes

more metallic the harder you play.

G1 Pipe Organ

This is a typical pipe organ sound (8 feet + 4 feet + 2 feet). Good

for sacred music from the Baroque period.

G♯1 Jazz Organ

The sound of a “tonewheel” type electric organ. Often heard in

jazz and rock music. The rotary speed of the rotary speaker

effect can be switched by using the left pedal.

A1 Strings

Stereo-sampled, large-scale strings ensemble with realistic

reverb. Try combining this Voice with piano in the Dual mode.

C♯1D♯1F♯1G♯1

C1 D1 E1 F1 G1 A1Lowest key

Playing Various Musical Instrument Sounds (Voices)

YDP-S52 Owner’s Manual

Special individual Demo Songs are provided for all of the instrument Voices.

1. Press [DEMO/SONG] to start playback.

The [PLAY] lamp flashes, and the Demo Song for the current Voice starts.

Starting with the selected song, the playback of the Demo Songs will continue.

After the last demo song, the sequence then returns to the first Demo Song and

repeats until you stop it.

To change the Demo Song during playback:

Press the [+R] or [–L] to change to the next or previous Demo Song.

To change to a specific Demo Song, press and hold down the [DEMO/SONG], then

press one of the C1 – A1 keys.

2. Press [DEMO/SONG] or [PLAY] to stop playback.

The [PLAY] lamp turns off.

Demo Song List

The Demo Songs excluding original Songs are short rearranged excerpts from the original

Listening to the Demo Songs

NOTE

If you want to change the

playback tempo, see page 17.

Key Voice Name Title Composer

C1 Grand Piano 1 Blumenlied G. Lange

C♯1 Grand Piano 2

Von fremden Landern und Menchen,

Kinderszenen op. 15-1

R. Schumann

D1 Grand Piano 3 Original Original

D♯1 E.Piano 1 Original Original

E1 E.Piano 2 Original Original

F1 Harpsichord

Concerto a cembalo obbligato, 2 violini, viola e

continuo No. 7, BWV. 1058

J. S. Bach

F♯1 Vibraphone Original Original

G1 Pipe Organ Herr Christ, der ein’ge Gottes-Sohn, BWV. 601 J. S. Bach

G♯1 Jazz Organ Original Original

A1 Strings Original Original

Lowest key C1 A1

Playing Various Musical Instrument Sounds (Voices)

YDP-S52 Owner’s Manual

This instrument features several Reverb Types that add extra depth and expression to the sound to create a

realistic acoustic ambience. The appropriate Reverb Type and Depth are called up automatically when you

select each of the Voices and Songs. This is why the Reverb Type need not be selected; however, you can

change it if desired.

To select a Reverb Type:

While holding down [PIANO/VOICE], press one of the C2 – E2 keys.

Reverb Type List

To adjust Reverb Depth:

While holding down [PIANO/VOICE], press one of the C3 – G♯4 keys. The

Depth value increases as you press higher keys.

While holding down [PIANO/VOICE], press the A4 key to set the Reverb Depth

to the most suitable value for the current Voice.

Adding Variations to the Sound (Reverb)

Reverb in Dual Mode

An optimum reverb type for the

combination of Voices is

assigned automatically.

Lowest key

C3: depth 0

G♯4: depth 20

The depth value increases as you

press higher keys.

C♯ 2D♯2

C2 D2 E2

Selecting a

Reverb Type

Adjusting

Reverb Depth

Highest key

Key Reverb Type Description

C2 Recital Hall

Simulates the clear reverb sound you would hear in a medium-

sized concert hall for piano recitals.

C♯2 Concert Hall

Simulates the gorgeous reverb sound you would hear in a large

concert hall for orchestral performances.

D2 Chamber

Suitable for playing chamber music; simulates the intimate

reverb sound you would hear in a spacious room, such as for

classical music recitals.

D♯2Club

Simulates the vivid reverb sound you would hear in a live music

venue or a jazz club.

E2 Off No effect is applied.

Reverb Depth range:

0 (no effect) – 20 (maximum

depth)

La pagina sta caricando ...

Yamaha YDPS52B Manuale utente

Marca: Yamaha

Modello: YDPS52B

Categoria: Apparecchiature musicali supplementari

Tipo: Manuale utente

Questo manuale è adatto anche per

YDP-S52

Scarica il pdf

rapporto

in altre lingue

English: Yamaha YDPS52B User manual
français: Yamaha YDPS52B Manuel utilisateur
español: Yamaha YDPS52B Manual de usuario
Deutsch: Yamaha YDPS52B Benutzerhandbuch
русский: Yamaha YDPS52B Руководство пользователя
Nederlands: Yamaha YDPS52B Handleiding
português: Yamaha YDPS52B Manual do usuário
dansk: Yamaha YDPS52B Brugermanual
čeština: Yamaha YDPS52B Uživatelský manuál
polski: Yamaha YDPS52B Instrukcja obsługi
svenska: Yamaha YDPS52B Användarmanual
Türkçe: Yamaha YDPS52B Kullanım kılavuzu
suomi: Yamaha YDPS52B Ohjekirja
română: Yamaha YDPS52B Manual de utilizare

Documenti correlati

Altri documenti

ONKYO DS-A5 Manuale utente