Pioneer GEX-P5750TV Istruzioni per l'uso

Tipo
Istruzioni per l'uso
Operation Manual
Hide-away TV tuner
GEX-P5750TV
English \-Español
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate
your model properly. After you have finished reading the instructions, keep this man-
ual in a safe place for future reference.
Precautions
IMPORTANT SAFEGUARDS 3
To ensure safe driving 3
To avoid battery exhaustion 4
Before You Start
About this unit 5
Video system of a connected component 5
About this manual 5
Resetting the microprocessor 5
Switching the operation mode 6
Use and care of the remote control 6
Installing the battery 6
Using the remote control 7
Whats What
Remote control 8
Other remote controls 8
When using a Pioneer car DVD
players remote control 8
When using a Pioneer car DVD
players remote control 9
TV tuner (SRC mode)
Whats What 10
Head unit (e.g., AVH-P5750DVD) 10
Operating with different head units 10
Function compatibility charts 11
Head unit group 1 11
Head unit group 2 11
Head unit group 3 11
Head unit group 4 11
Watching the television 12
Storing and recalling broadcast stations 13
Introduction of advanced TV tuner
operation 14
Storing the strongest broadcast stations
sequentially 14
TV tuner (STAND ALONE mode)
Watching the television 15
Storing the strongest broadcast stations
sequentially 15
Recalling broadcast stations 15
Confirming current channel and other
settings 16
Additional Information
Specifications 17
Contents
En
2
IMPORTANT SAFEGUARDS
Please read all of these instructions regarding
your display and retain them for future refer-
ence.
1 Read this manual fully and carefully be-
fore operating your display.
2 Keep this manual handy as a reference for
operating procedures and safety informa-
tion.
3 Pay close attention to all warnings in this
manual and follow the instructions care-
fully.
4 Do not allow other persons to use this sys-
tem until they have read and understood
the operating instructions.
5 Do not install the display where it may (i)
obstruct the drivers vision, (ii) impair the
performance of any of the vehicles oper-
ating systems or safety features, includ-
ing air bags, hazard lamp buttons or (iii)
impair the drivers ability to safely oper-
ate the vehicle.
6 As with any accessory in your vehicles in-
terior, the display should not divert your
attention from the safe operation of your
vehicle. If you experience difficulty in op-
erating the system or reading the display,
please park safely before making adjust-
ments.
7 Please remember to wear your seat belt at
all times while operating your vehicle. If
you are ever in an accident, your injuries
can be considerably more severe if your
seat belt is not properly buckled.
8 Never use headphones while driving.
9 To promote safety, certain functions are
disabled unless the parking brake is on,
and the vehicle is not in motion.
10 Never set the volume of your display so
high that you cannot hear outside traffic
and emergency vehicles.
WARNING
! Do not attempt to install or service your
display by yourself. Installation or servi-
cing of the display by persons without
training and experience in electronic
equipment and automotive accessories
may be dangerous and could expose you
to the risk of electric shock or other
hazards.
To ensure safe driving
WARNING
! LIGHT GREEN LEAD AT POWER CON-
NECTOR IS DESIGNED TO DETECT
PARKED STATUS AND MUST BE CON-
NECTED TO THE POWER SUPPLY SIDE
OF THE PARKING BRAKE SWITCH. IM-
PROPER CONNECTION OR USE OF
THIS LEAD MAY VIOLATE APPLICABLE
LAW AND MAY RESULT IN SERIOUS IN-
JURY OR DAMAGE.
! To avoid the risk of accident and the potential
violation of applicable laws, the front TV fea-
ture should never be used while the vehicle is
being driven. Also, rear displays should not be
in a location where it is a visible distraction to
the driver.
! In some countries or states the viewing of
images on a display inside a vehicle even by
persons other than the driver may be illegal.
Where such regulations apply, they must be
obeyed and this units TV features should not
be used.
This unit detects whether your vehicles park-
ing brake is engaged or not, and prevents you
from watching TV on the front display while
driving. When you attempt to watch a TV, the
screen turns to black and nothing is dis-
played.
Precautions
En
3
English
Section
01
To watch TV on the front display, park your ve-
hicle in a safe place and apply the parking
brake.
To avoid battery exhaustion
Be sure to run the vehicle engine while using
this unit. Using this unit without running the
engine can result in battery drainage.
WARNING
Do not use with vehicles that do not feature an
ACC position.
Precautions
En
4
Section
01
About this unit
CAUTION
! Do not allow this unit to come into contact
with liquids. Electrical shock could result.
Also, this unit damage, smoke, and overheat
could result from contact with liquids.
! Keep this manual handy as a reference for op-
erating procedures and precautions.
! Always keep the volume low enough so that
you can hear sounds from outside the vehicle.
! Protect this unit from moisture.
! If the battery is disconnected or discharged,
the preset memory will be erased and must be
reprogrammed.
! If this unit does not operate properly, contact
your dealer or nearest authorized Pioneer Ser-
vice Station.
This unit is a TV tuner for reception of TV
broadcasts. Combining it with a separately
sold display with AV-BUS lets you enjoy TV en-
tertainment (refer to this units installation
manual for details concerning the AV-BUS).
This unit features a REAR OUT, letting you
watch TV on a rear display (sold separately).
Video system of a
connected component
This unit is NTSC/PAL-M system compatible.
When connecting an external component to
this units REAR OUT, be sure the component
is compatible with the same video systems. If
it is not, images will not be correctly repro-
duced.
WARNING:
! Be sure to stop driving and park your vehicle
in a safe place before watching the TV.
! Watching the TV while driving is dangerous
and could result in an accident.
! This units REAR OUT is for connection of a
display to enable passengers in the rear seats
to watch the TV.
NEVER install the rear display in a location
that enables the driver to watch the TV while
driving.
About this manual
This unit features a number of sophisticated
functions ensuring superior reception and op-
eration. All the functions have been designed
for the easiest possible use, but many are not
self-explanatory. This operation manual will
help you benefit fully from this units potential
and to maximize your listening enjoyment.
We recommend that you familiarize yourself
with the functions and their operation by read-
ing through the manual before you begin
using this unit. It is especially important that
you read and observe WARNINGs and CAU-
TIONs in this manual.
Resetting the microprocessor
Pressing RESET lets you reset the micropro-
cessor to its initial settings.
The microprocessor must be reset under the
following conditions:
! Prior to using this unit for the first time
after installation
! If the unit fails to operate properly
! When strange or incorrect messages ap-
pear on the display
! When setting the position of the operation
mode switch on this unit
Before You Start
En
5
English
Section
02
% Press RESET with a pen tip or other
pointed instrument.
RESET button
Note
If you reset the microprocessor, memorized
broadcast stations and other information is
erased, and this unit returns to its initial
settings.
Switching the operation mode
This unit features three operation modes:
SRC : OSD OFF mode, SRC : OSD ON mode
and STAND ALONE mode. Switch the mode
according to the combined components.
SRC : OSD OFF mode
! Using with a Pioneer head unit featuring
an IP-BUS input.
! Not using this units OSD (On Screen Dis-
play) indications in the display.
SRC : OSD ON mode
! Using with a Pioneer head unit featuring
an IP-BUS input.
! Using this units OSD (On Screen Display)
indications in the display.
STAND ALONE mode
! Using with a display featuring RCA video
input.
% Use a thin standard tip screwdriver to
switch the operation mode switch.
! After switching, reset the micro-
processor.
Use and care of the remote
control
Installing the battery
Slide the tray out on the back of the remote
control and insert the battery with the plus (+)
and minus () poles pointing in the proper di-
rection.
WARNING
Keep the battery out of the reach of children.
Should the battery be swallowed, immediately
consult a doctor.
CAUTION
! Use only one CR2025 (3 V) lithium battery.
! Remove the battery if the remote control is not
used for a month or longer.
! Do not recharge, disassemble, heat or dispose
of the battery in fire.
Before You Start
En
6
Section
02
! Do not handle the battery with metallic tools.
! Do not store the battery with metallic materi-
als.
! In the event of battery leakage, wipe the re-
mote control completely clean and install a
new battery.
! When disposing of used batteries, please
comply with governmental regulations or en-
vironmental public institutions rules that
apply in your country/area.
Using the remote control
Point the remote control in the direction of the
front panel to operate.
Important
! Do not store the remote control in high tem-
peratures or direct sunlight.
! The remote control may not function properly
in direct sunlight.
! Do not let the remote control fall onto the
floor, where it may become jammed under the
brake or accelerator pedal.
Before You Start
En
7
English
Section
02
Remote control
This units supplied remote control is mainly
for use by rear seat passengers. When using,
point at the remote control sensor.
1 CH CALL button
SRC : OSD ON mode
When the TV is selected as a source, or,
when the rear TV is on and the TV is not se-
lected as a source:
Channel information is displayed on the
front and rear display.
SRC : OSD OFF mode
When the TV is selected as a source, or,
when the rear TV is on and the TV is not se-
lected as a source:
Channel information is displayed on the
rear display.
STAND ALONE mode
Press to display the current channel and
other settings (Confirming current channel
and other settings on page 16).
2 BAND button
SRC : OSD ON mode
Not used. Alternatively, use BAND on the
head unit.
SRC : OSD OFF mode
Not used. Alternatively, use BAND on the
head unit.
STAND ALONE mode
Press to select among two TV bands and to
cancel the control mode of functions.
3 MENU button
Not used.
4 a/b/c/d buttons
SRC : OSD ON mode
Press to do manual seek tuning and preset
tuning. Also used for controlling functions.
SRC : OSD OFF mode
Press to do manual seek tuning and preset
tuning. Also used for controlling functions.
STAND ALONE mode
Press to do manual seek tuning and preset
tuning.
5 POWER button
SRC : OSD ON mode
Press to turn the rear display on or off when
the TV is not selected as a source.
SRC : OSD OFF mode
Press to turn the rear display on or off when
the TV is not selected as a source.
STAND ALONE mode
Press to turn this unit on or off.
Other remote controls
You can also perform operations with the re-
mote controls shown below.
When using a Pioneer car DVD
players remote control
When using a remote control supplied with
SDV-P7, AVX-P7300DVD, XDV-P9, XDV-P9
II
.
1 r button
Press and hold to BSSM on or off.
2
5
3
1
4
Whats What
En
8
Section
03
2 Remote control operation mode switch
When operating a TV, be sure to set the re-
mote control operation mode switch to TV
position.
When using a Pioneer car DVD
players remote control
When using a remote control supplied with
AVH-P7650DVD, AVH-P7550DVD, AVH-
P6650DVD, AVH-P6550DVD, AVH-P5750DVD,
AVX-P7650DVD.
1 16 buttons
Press to do direct channel select.
2 Joystick
Move to do manual seek tuning and preset
tuning. When using this unit as
STAND ALONE mode, click to display the
area group setting screen. Also used for
controlling functions.
3 Remote control operation mode switch
When operating a TV, be sure to set the re-
mote control operation mode switch to TV
position.
Whats What
En
9
English
Section
03
Only when using this unit with SRC mode,
you can perform the following operations
by head unit.
Whats What
Head unit (e.g., AVH-P5750DVD)
Operate this unit (for TV reception) with the
connected head unit. Instructions in this man-
ual use AVH-P5750DVD as an example of
head unit.
1 VOLUME
Press to increase or decrease the volume.
2 Signal receptor
Receives signals from a remote control.
3 SOURCE button
This unit is turned on by selecting a source.
Press to cycle through all the available
sources.
4 BAND button
Press to select among two TV bands and to
cancel the control mode of functions.
5 A.MENU button
Press to display MENU.
6 a/b/c/d buttons
Press to do manual seek tuning. Also used
for controlling functions.
Operating with different
head units
Head unit group 1
The following head units featuring touch
panel key operation.
AVH-P7650DVD, AVH-P7550DVD, AVH-
P6650DVD, AVH-P6550DVD, AVH-P5750DVD
5
4
3
6
1
2
TV tuner (SRC mode)
En
10
Section
04
Head unit group 2
When using the following head units, opera-
tion is different from AVH-P5750DVD.
The following head units featuring FUNCTION
button operation or SOFT KEY operation.
KEH-P7035, FH-P9200MP, FH-P6200, FH-
P5000MP, FH-P4200MP, DVH-P5650MP, DVH-
P5050MP, DEH-P9650MP, DEH-P7650MP, DEH-
P7550MP, DEH-P6750MP, DEH-P6550, DEH-
P5750MP, DEH-P5650MP, DEH-P5550MP, DEH-
P4750MP, DEH-P4650MP, DEH-P4550, DEH-
P3550MP, DEH-P2650MP, DEH-P2550
Head unit group 3
When using the following head units, opera-
tion is different from AVH-P5750DVD.
The following head units featuring
MULTI-CONTROL operation.
DEH-P8650MP, DEH-P7750MP, DEH-P1Y
Head unit group 4
When using the following head units, opera-
tion is different from AVH-P5750DVD.
The following head units featuring remote con-
trol operation.
AVX-P7650DVD
Function compatibility charts
Head unit group 1
Controls
Select TV as a source Press SOURCE.
Select a band Touch BAND.
Preset tuning Touch a or b.
Manual tuning (step
by step)
Tou ch c or d.
Seek tuning Keep touching c or d.
Select a function
Tou ch A.MENU and then
touch FUNCTION.
Head unit group 2
Controls
Select TV as a source Press SOURCE.
Select a band Press BAND.
Preset tuning Press a or b.
Manual tuning (step
by step)
Press c or d.
Seek tuning Press and hold c or d.
Preset memory Press and hold 16.
Direct recall Press 16.
BSSM
Press FUNCTION (FUNC)
(A.MENU).
a/b
Preset channel list
Press FUNCTION (FUNC)
(A.MENU).
a/b/c/d
Head unit group 3
Controls
Select TV as a source Press SOURCE.
Select a band Press BAND.
Preset tuning
Push MULTI-CONTROL up
or down.
Manual tuning (step
by step)
Push MULTI-CONTROL left
or right.
Seek tuning
Push and hold MULTI-CON-
TROL left or right.
Select a function Use MULTI-CONTROL.
Head unit group 4
Controls
Select TV as a source Press SOURCE.
Select a band Press BAND.
Preset tuning
Move the joystick up or
down.
TV tuner (SRC mode)
En
11
English
Section
04
Controls
Manual tuning (step
by step)
Move the joystick left or
right.
Seek tuning
Hold the joystick left or right
for about one second and re-
lease.
Select a function Use the joystick.
Watching the television
1
3
4
2
5
1 Source icon
Shows which source has been selected.
2 Band indicator
Shows which band the TV tuner is tuned to.
3 Preset number indicator
Shows which preset has been selected.
4 Channel indicator
Shows which channel the TV tuner is tuned.
5 Preset list display
Shows the preset list.
1 Touch the screen to display the touch
panel keys.
2 Touch BAND to select a band.
Touch BAND repeatedly until the desired band
is displayed, TV1 or TV2.
3 To select a preset channel, touch a pre-
set channel on the list.
The preset channel you selected is tuned in.
# When the list of channels is not displayed,
touch LIST.
TV tuner (SRC mode)
En
12
Section
04
4 To perform manual tuning, briefly
touch c or d.
The channels move up or down step by step.
# You can also perform manual tuning by press-
ing c or d button.
5 To perform seek tuning, keep touching
c or d for about one second and release.
The tuner will scan the channels until a broad-
cast strong enough for good reception is
found.
# You can cancel seek tuning by briefly touching
either c or d.
# If you keep touching c or d you can skip
broadcasting channels. Seek tuning starts as
soon as you release the keys.
# You can also perform seek tuning by pressing
and holding c or d button.
Storing and recalling
broadcast stations
If you touch any of the preset tuning keys
P1P12 you can easily store up to 12 broad-
cast stations for later recall with the touch of a
key.
% When you find a station that you want
to store in memory, keep touching one of
preset tuning keys P1P12 until the preset
number stops flashing.
The number you have touched will flash in the
preset number indicator and then remain lit.
The selected station has been stored in mem-
ory.
The next time you touch the same preset tun-
ing key the station is recalled from memory.
# To switch between P1P6 and P7P12, touch
or .
# When the touch panel keys are not displayed,
you can display them by touching the screen.
# When P1P6 and P7P12 are not displayed,
you can display them by touching LIST.
Notes
! Up to 24 stations, 12 for each of two TV bands,
can be stored in memory.
! You can also use a and b to recall stations
assigned to preset tuning keys P1P12.
TV tuner (SRC mode)
En
13
English
Section
04
Introduction of advanced
TV tuner operation
1
1 Function display
Shows the function name.
1 Press A.MENU button to display MENU.
MENU appears on the display.
2 Touch FUNCTION to display the func-
tion name.
The function name is displayed.
# To return to the previous display, touch BACK.
# To return to the TV picture, touch ESC.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the TV picture.
Storing the strongest
broadcast stations
sequentially
% Touch BSSM on the function menu to
turn BSSM on.
BSSM begins to flash. While BSSM is flashing
the 12 strongest broadcast stations will be
stored in order from the lowest channel up.
When finished, BSSM disappears.
# To cancel the storage process, touch BSSM
again.
# You can also perform this operation by press-
ing and holding CH CALL on the remote control.
Note
Storing broadcast stations with BSSM may re-
place broadcast stations you have saved using
P1P12.
TV tuner (SRC mode)
En
14
Section
04
Watching the television
3
1
2
Only when using this unit with
STAND ALONE mode, you can perform the
following operations by this unit.
Only the remote control can operate the fol-
lowing functions.
1 Channel indicator
Shows which channel the TV tuner is tuned.
2 Preset number indicator
Shows which preset has been selected.
3 Band indicator
Shows which band the TV tuner is tuned to.
1 Press POWER to turn the TV on.
2 Press BAND to select a band.
3 To perform manual tuning, briefly press
c or d.
The channels move up or down step by step.
# You can also perform manual tuning by press-
ing CHANNEL.
4 To perform seek tuning, press and hold
c or d for about one second and release.
The tuner will scan the channels until a broad-
cast strong enough for good reception is
found.
# You can cancel seek tuning by briefly pressing
either c or d.
# If you press and hold c or d you can skip
broadcasting channels. Seek tuning starts as
soon as you release the button.
Storing the strongest
broadcast stations
sequentially
BSSM (best stations sequential memory) lets
you automatically store the 12 strongest
broadcast stations in order from the lowest
channel up.
% Press CH CALL and hold to turn BSSM
on.
BSSM begins to flash. While BSSM is flashing
the 12 strongest broadcast stations will be
stored in order from the lowest channel up.
When finished, BSSM disappears.
# To cancel the storage process, press and hold
CH CALL again.
Recalling broadcast stations
You can easily recall preset channels P1P12
stored by BSSM.
% Press a or b to recall preset channels
P1P12.
TV tuner (STAND ALONE
mode)
En
15
English
Section
05
Confirming current channel
and other settings
You can display the reception information
such as the channel, band and preset channel
list.
! Only the remote control can operate this
function.
% Press CH CALL to display the reception
information.
Each press of CH CALL displays reception in-
formations in the following order:
Current channel information (channel and
band)Preset channel listReception infor-
mations disappear
# Reception informations are displayed for eight
seconds.
TV tuner (STAND ALONE
mode)
En
16
Section
05
Specifications
General
Rated power source ............... 14.4 V DC
(allowable voltage range:
12.0 14.4 V DC)
Grounding system ................... Negative type
Max. current consumption
..................................................... 0.6 A
Dimensions (W × H × D) ... 172 × 30 × 150 mm
Weight .......................................... 0.7 kg
TV tuner
Reception channel .................. VHF 2 13 ch, UHF 14 69
ch
Color system .............................. NTSC/PAL-M compatible
Usable sensitivity ..................... 11 dBµ (75 W, Mono)
Video S/N ..................................... Over 40 dB (59 dBµ RF
input, White Peak 100%)
Video S/N 30 dB usable sensitivity
..................................................... 44 dBµ
Antenna input ........................... 4 ch Diversity 3.5 mm
Mini plug type)
Rear display output
Video .............................................. 1 Vp-p/75W (TV: White 100%
Modulated)
Sound ............................................ 500 mVrms/Less than 1kW
(TV: 100% Modulated)
Infrared remote control
Wavelength ................................. 945 nm
Output ........................................... typ; 12 mw/sr per Infrared
LED
Note
Specifications and the design are subject to pos-
sible modifications without notice due to im-
provements.
Additional Information
En
17
English
Appendix
Gracias por haber comprado este producto Pioneer.
Lea con detenimiento estas instrucciones sobre el funcionamiento del aparato,
para que pueda dar el mejor uso posible a su modelo. Una vez que las haya leído,
guarde este manual en un lugar seguro para consultarlo en el futuro.
Precauciones
INSTRUCCIONES DE SEGURIDAD
IMPORTANTES 19
Para garantizar la conducción segura del
vehículo 19
Para evitar la descarga de la batería 20
Antes de comenzar
Acerca de esta unidad 21
Sistema de vídeo de un componente
conectado 21
Acerca de este manual 21
Reinicialización del microprocesador 22
Cambio del modo de funcionamiento 22
Uso y cuidado del mando a distancia 23
Instalación de la batería 23
Uso del mando a distancia 23
Qué es cada cosa
Mando a distancia 24
Otros mandos a distancia 25
Al usar el mando a distancia de un
reproductor Pioneer de DVD para
automóvil 25
Al usar el mando a distancia de un
reproductor Pioneer de DVD para
automóvil 25
Sintonizador de TV (modo SRC)
Qué es cada cosa 26
Unidad principal (p. ej., AVH-
P5750DVD) 26
Funcionamiento con diferentes unidades
principales 27
Tablas de compatibilidad de funciones 27
Grupo 1 de unidades principales 27
Grupo 2 de unidades principales 27
Grupo 3 de unidades principales 28
Grupo 4 de unidades principales 28
Uso del televisor 28
Almacenamiento y llamada de emisoras 29
Introducción a las funciones avanzadas del
sintonizador de TV 30
Almacenamiento consecutivo de las
emisoras con señales más fuertes 30
Sintonizador de TV (modo STAND
ALONE)
Uso del televisor 31
Almacenamiento consecutivo de las
emisoras con señales más fuertes 31
Llamada de emisoras 31
Confirmación del canal actual y otros
ajustes 32
Información adicional
Especificaciones 33
Contenido
Es
18
INSTRUCCIONES DE
SEGURIDAD IMPORTANTES
Lea todas estas instrucciones sobre el display
y consérvelas para consultarlas en el futuro.
1 Lea todo este manual con suma atención
antes de utilizar el display.
2 Conserve este manual a mano para que
pueda consultar los procedimientos de
operación y la información sobre seguri-
dad cuando sea necesario.
3 Preste mucha atención a todas las adver-
tencias que se indican en este manual y
siga las instrucciones con cuidado.
4 No permita que otras personas utilicen
este sistema hasta que hayan leído y com-
prendido las instrucciones sobre el funcio-
namiento del aparato.
5 No instale el display en un lugar que (i)
pueda obstaculizar la visión del conduc-
tor, (ii) pueda alterar el funcionamiento de
los sistemas operativos o los dispositivos
de seguridad del vehículo, en particular
las airbags y los botones de luces de se-
guridad o (iii) pueda afectar la capacidad
del conductor para manejar el vehículo de
manera segura.
6 Al igual que con cualquier accesorio ubi-
cado en el interior del vehículo, el display
no debe desviar su atención del manejo
seguro del vehículo. Si tiene dificultades
para utilizar el sistema o leer el display,
estacione en un lugar seguro antes de
hacer algún ajuste.
7 Recuerde usar siempre el cinturón de se-
guridad cuando conduzca el vehículo. En
caso de accidente, las lesiones pueden ser
mucho más graves si el cinturón de segu-
ridad no está debidamente abrochado.
8 Nunca use auriculares mientras conduce.
9 Para promover la seguridad, ciertas fun-
ciones están desactivadas a menos que se
active el freno de mano y el vehículo no
esté en movimiento.
10 Nunca fije el volumen del display tan alto
que no pueda escuchar el tráfico exterior
y los vehículos de emergencia.
ADVERTENCIA
! No trate de instalar o reparar el display
usted mismo. La instalación o la repara-
ción del display por parte de personas sin
capacitación y experiencia en equipos
electrónicos y accesorios para automóvi-
les puede ser peligrosa y puede exponerlo
al riesgo de sufrir una descarga eléctrica o
a otros peligros.
Para garantizar la conducción
segura del vehículo
ADVERTENCIA
! EL CABLE VERDE CLARO DEL CONEC-
TOR DE ALIMENTACIÓN ESTÁ DISEÑA-
DO PARA DETECTAR SI EL VEHÍCULO
ESTÁ ESTACIONADO Y DEBE CONEC-
TARSE CON EL LADO DE LA FUENTE DE
ALIMENTACIÓN DEL INTERRUPTOR
DEL FRENO DE MANO. LA CONEXIÓN O
EL USO INCORRECTO DE ESTE CABLE
PUEDE INFRINGIR LAS LEYES PERTI-
NENTES Y OCASIONAR LESIONES FÍSI-
CAS O DAÑOS GRAVES.
! Para evitar el riesgo de accidentes y la posible
violación de las leyes pertinentes, la función
de TV delantera nunca debe utilizarse mien-
tras se maneja el vehículo. Además, los dis-
plays traseros no deben estar en un lugar
donde sean una distracción visual para el
conductor.
Precauciones
Es
19
Sección
Español
01
! En algunos países o estados, puede ser ilícita
la visualización de imágenes en un display
dentro de un vehículo, incluso por otras perso-
nas que no sean el conductor. En los casos en
que resulten aplicables, estas normas deben
respetarse y no deben usarse las funciones de
TV de esta unidad.
Esta unidad detecta si el freno de mano del
automóvil está activado o no, y le impide ver
programas de TV en el display delantero mien-
tras conduce. Si intenta ver un programa de
TV, la pantalla de ennegrecerá y no se mostra-
nada en ella.
Para ver un programa de TV en el display de-
lantero, estacione el automóvil en un lugar se-
guro y active el freno de mano.
Para evitar la descarga de
la batería
Utilice esta unidad con el motor del vehículo
encendido. De no hacerlo, se puede descargar
la batería.
ADVERTENCIA
No utilice la unidad con un vehículo que no cuen-
te con la posición ACC.
Precauciones
Es
20
Sección
01
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60

Pioneer GEX-P5750TV Istruzioni per l'uso

Tipo
Istruzioni per l'uso