Panasonic WHMDC12H6E5 Istruzioni per l'uso

Nederlands Italiano Español English

Operating Instructions

(Mono bloc) Air-to-Water Heatpump

2-27

Thank you for purchasing Panasonic

product.

Before operating the system, please read these

operating instructions thoroughly and keep them for

future reference.

Installation Instructions attached.

Instrucciones de funcionamiento

Bomba de calor de aire a agua (Mono bloc)

28-53

Gracias por comprar un producto Panasonic.

Antes de utilizar la unidad, sírvase leer atentamente

estas instrucciones de funcionamiento y conservarlas

para futuras consultas.

Instrucciones de instalación adjuntas.

Istruzioni operative

Pompa di calore Aria-acqua (Mono bloc)

54-79

Grazie per aver acquistato un prodotto

Panasonic.

Prima di utilizzare l’unità, leggere attentamente le

istruzioni e conservare questo opuscolo per potervi fare

riferimento in futuro.

Istruzioni per l’installazione allegate.

Gebruiksaanwijzing

(Mono bloc) Air-to-Water Warmtepomp

80-105

Hartelijk dank voor het aanschaffen van een

Panasonic-product.

Lees voor u het apparaat gebruikt deze

gebruikshandleiding grondig en bewaar deze voor

toekomstig gebruik.

De instructies voor installatie zijn bijgevoegd.

ACXF55-14602

Operating Instructions

(Mono bloc)

Air-to-Water Heatpump

Model No.

WH-MDC05H3E5

WH-MDC07H3E5

WH-MDC09H3E5

Model No.

WH-MDC12H6E5

WH-MDC16H6E5

WH-MXC09H3E5

WH-MXC12H6E5

WH-MXC09H3E8

WH-MXC12H9E8

WH-MXC16H9E8

2

Table of contents

Safety precautions .........................................................4-6

Remote Controller buttons and display .........................7-9

Initialization .......................................................................9

Quick Menu ....................................................................10

Menus ........................................................................10-23

For user

1 Function setup ...................................................10-11

1.1 Weekly timer

1.2 Holiday timer

1.3 Quiet timer

1.4 Room heater

1.5 Tank heater

1.6 Sterilization

2 System check ....................................................11-12

2.1 Energy monitor

2.2 Water temperatures

2.3 Error history

2.4 Compressor

2.5 Heater

3 Personal setup ...................................................12-13

3.1 Touch sound

3.2 LCD contrast

3.3 Backlight

3.4 Backlight intensity

3.5 Clock format

3.6 Date & Time

3.7 Language

3.8 Unlock password

4 Service contact .......................................................13

4.1 Contact 1 / Contact 2

For installer

5 Installer setup > System setup ...........................14-18

5.1 Optional PCB connectivity

5.2 Zone & Sensor

5.3 Heater capacity

5.4 Anti freezing

5.5 Tank connection

5.6 Buffer tank connection

5.7 Tank heater

5.8 Base pan heater

5.9 Alternative outdoor sensor

5.10 Bivalent connection

5.11 External SW

5.12 Solar connection

5.13 External error signal

5.14 Demand control

5.15 SG ready

5.16 External compressor SW

5.17 Circulation liquid

5.18 Heat-Cool SW

5.19 Force heater

6 Installer setup > Operation setup .......................18-22

6.1 Heat

6.2 Cool

6.3 Auto

6.4 Tank

7 Installer setup > Service setup ...........................22-23

7.1 Pump maximum speed

7.2 Pump down

7.3 Dry concrete

7.4 Service contact

Cleaning instructions ......................................................24

Troubleshooting .........................................................25-26

Information ......................................................................27

3

English

Air-to-Water

Heatpump

(mono-bloc unit)

Power Supply

Solar Panel

Radiator

Shower

Fan Coil

Unit

Floor

Heating

Water Tank Unit

Remote Controller

The illustrations in this manual are for explanation purposes only and may differ from the actual unit.

They are subject to change without notice for future improvement.

System overview

Before use, make sure the system has been installed correctly by an

authorised dealer according to the given instructions.

• Panasonic (Mono bloc) Air-to-Water Heatpump is designed to operate with Panasonic Water Tank Unit. Unless used

together with the Panasonic Water Tank Unit, Panasonic does not guarantee any normal operation nor the reliability of

the system.

• These operating instructions describe how to operate the system using the mono bloc unit.

• As for the operation of other products such as water tank, radiator, external thermo controller, and underfloor units, refer

to the operating instructions of each product.

• System could be locked to operate in HEAT mode and disable COOL mode.

• Some functions described in this manual may not be applicable to your system.

• Consult your nearest authorised dealer for further information.

*1 The system is locked to operate without COOL mode. It can be unlocked only by authorised installers or our authorised

service partners.

*2 Only displayed when COOL mode is unlocked (This means when COOL mode is available).

Operating conditions

HEATING

*

1

COOLING

For H (series) WH-MDC series WH-MXC series

Water outlet temperature (°C)

(Min. / Max.)

20 / 55

20 / 55 (Below Ambient -15°C) *

3

20 / 60 (Above Ambient -10°C) *

3

5 / 20

Outdoor ambient temperature (°C)

(Min. / Max.)

-20 / 35 -20 / 35 16 / 43

When the outdoor temperature is out of the range in the table, the heating capacity will drop significantly and the mono bloc

unit may stop operating for its protection.

The unit will restart automatically after the outdoor temperature returns to the specified range.

*3 Between outdoor ambient -10°C and -15°C, the water outlet temperature gradually decreases from 60°C to 55°C.

4

To prevent personal injury, injury to

others or property damage, please

comply with the following:

Incorrect operation due to failure to

follow instructions below may cause

harm or damage, the seriousness of

which is classified as below:

WARNING

This sign warns of

death or serious

injury.

CAUTION

This sign warns of

injury or damage

to property.

The instructions to be followed are

classified by the following symbols:

This symbol denotes

an action that is

PROHIBITED.

These symbols denote

actions COMPULSORY.

WARNING

Mono bloc unit

This appliance may be used by

children aged from 8 years and

above and persons with reduced

physical, sensory or mental

capabilities or lack of experience

and knowledge if they have been

given supervision or instruction

concerning use of the appliance

in a safe way and understand

the hazards involved. Children

shall not play with the appliance.

Cleaning and user maintenance

shall not be made by children

without supervision.

Please consult an authorised

dealer or specialist to clean the

internal parts, repair, install,

remove, disassemble and

reinstall the unit. Improper

installation and handling will

cause leakage, electric shock or

fire.

Confirm with an authorised

dealer or specialist on usage of

any specified refrigerant type.

Using refrigerant type other than

the specified may cause product

damage, burst and injury etc.

Do not install the unit in

a potentially explosive or

flammable atmosphere. Failure

to do so could result in fire.

Do not insert your fingers

or other objects into the

mono bloc unit; the rotating

parts may cause injury.

Safety precautions

5

English

Do not touch the mono bloc unit

during lightning, it may cause an

electric shock.

Do not sit or step on the

unit, you may fall down

accidentally.

Power supply

Do not use a

modified cord, joint

cord, extension

cord or unspecified

cord to prevent

overheating and fire.

To prevent overheating, fire or

electric shock:

• Do not share the same power

outlet with other equipment.

• Do not operate with wet hands.

• Do not bend or twist power

supply cord.

If the supply cord is damaged,

it must be replaced by the

manufacturer, service agent or

similarly qualified persons in

order to avoid a hazard.

This unit is equipped with

Residue Current Circuit Breaker

(RCCB). Ask an authorised

dealer to check RCCB operation

regularly, especially after

installation, inspection, and

maintenance. RCCB malfunction

may result in electric shock and/

or fire.

It is strongly recommended that

Install Residual Current Device

(RCD) on-site to prevent electric

shock and/or fire.

Before obtaining access to

terminals, all supply circuits must

be disconnected.

Stop using the product if any

abnormality/failure occurs and

disconnect the power supply.

(Risk of smoke/fire/electric

shock)

Examples of abnormality/failure

• RCCB trips frequently.

• Burning smell is observed.

• Abnormal noise or vibration of

the unit is observed.

• Hot water leaks from the unit.

Contact your local dealer

immediately for maintenance/

repair.

Wear gloves during inspection

and maintenance.

This equipment must be earthed

to prevent electrical shock or fire.

Prevent electric shock by

disconnecting the power supply

- Before cleaning or servicing.

- When extended non-use.

This appliance is for multiple

uses. To avoid electric shock,

burn and/or fatal injury, make

sure to disconnect all power

supplies before accessing any

terminal in the unit.

Safety precautions

6

CAUTION

Mono bloc unit

Do not wash the unit with water,

benzine, thinner or scouring

powder to avoid damage or

corrosion on the unit.

Do not install the unit close

to any combustibles or in a

bathroom. Otherwise, it may

cause electric shock and/or fire.

Do not touch the water discharge

pipe of the unit during operation.

Do not place any material on the

unit or under it.

Do not touch the sharp

aluminium fin; sharp parts

may cause injury.

Do not use the system during

sterilization in order to prevent

scalding with hot water, or

overheating of shower.

Prevent water leakage by

ensuring that the drainage pipe

is connected properly.

After a long period of use, make

sure the installation rack is not

deteriorated. The deteriorated

rack may cause the unit to fall

down.

Ask an authorised dealer

to determine the level of

sterilization function field settings

according to the local laws and

regulations.

Remote Controller

Do not wet the Remote

Controller. Failure to do so may

result in electric shock and/or

fire.

Do not press the buttons on the

Remote Controller using hard

and sharp objects. Failure to do

so may cause damage to the

unit.

Do not wash the Remote

Controller using water, benzine,

thinner or scouring powder.

Do not inspect or maintain the

Remote Controller by yourself.

Consult an authorised dealer in

order to prevent personal injury

caused by incorrect operation.

Safety precautions

7

English

Remote Controller buttons and display

Buttons / Indicator

1

Quick Menu button

(For more details, refer to the separate

Quick Menu Guide.)

2

Back button

Returns to the previous screen

3 LCD Display

4

Main Menu button

For function setup

5

ON/OFF button

Starts/Stops operation

6

Operation indicator

Illuminates during operation, blinks during

alarm.

Press centre

No glove

No pen

2

1

4

5

6

3

Cross key buttons

Selects an item.

Enter button

Fixes the selected content.

Up

Down

Left Right

Safety precautions / Remote Controller buttons and display

8

Remote Controller buttons and display

Display

1 Mode selection

AUTO

• Depending on the preset outdoor

temperature, the system selects

HEAT or *

1

COOL operation mode.

Auto Heat Auto Cool

*

1,

*

2

COOL • The fan coil unit is either turned

ON or OFF.

• The mono bloc unit provides

cooling to the system.

AUTO

+ TANK

• Depending on the preset outdoor

temperature, the system selects

HEAT + TANK or *

1

COOL + TANK

operation mode.

Auto Heat Auto Cool

*

1,

*

2

COOL

+ TANK

• The mono bloc unit provides

cooling to the system.

• The system controls the booster

heater in the water tank.

HEAT

• The panel/floor HEAT operation is

either turned ON or OFF.

• The mono bloc unit provides heat

to the system.

TANK • The water tank is either turned

ON or OFF.

• The mono bloc unit provides heat

to the water tank.

HEAT

+ TANK

• The mono bloc unit provides heat

to the water tank and the system.

• This mode can be selected only

when the water tank is installed.

* The direction icons point to the currently

active mode.

• Room operation / Tank operation.

• Deice operation.

2

Operation icons

The status of operation is displayed.

Icon will not display (under operation OFF screen) whenever operation is OFF except weekly timer.

Holiday operation status Weekly Timer operation status Quiet operation status

Zone: Room Thermostat

→Internal sensor status

Powerful operation status

Demand Control or

SG ready or SHP status

Room Heater status Tank Heater status Solar status

Bivalent status

(Boiler)

2 43

1

5

6

7

*1

The system is locked to operate without COOL mode. It can be unlocked only by authorised installers or our authorised service partners.

*2 Only displayed when COOL mode is unlocked (This means when COOL mode is available).

9

English

Initialization

Before starting to install the various menu settings, please initiate the Remote Controller by selecting the language of

operation and installing the date and time correctly.

It is recommended that the installer conducts the following initialization of the Remote Controller.

Selecting the language

LCD blinking

Press and wait while the display is

initializing.

1

Scroll with

and to select the language.

2

Press to confirm the selection.

Setting the clock

1

Select with

or how to display the time,

either 24h or am/pm format (for example, 15:00

or 3 pm).

2

Press to confirm the selection.

3

Use

and to select year, month, day,

hour and minutes. (Press to confirm the

selection each time.)

4

Once the time is set, time and day will appear

on the display even if the Remote Controller is

turned OFF.

3 Temperature of each zone

4 Time and day

5 Water Tank temperature

6 Outdoor temperature

7 Sensor type/Set temperature type icons

Water Temperature

→Compensation curve

Water Temperature

→Direct

Pool only

Room Thermostat

→External

Room Thermostat

→Internal

Remote Controller buttons and display / Initialization

10

Menus

For user

Select menus and determine settings according to the system

available in the household. All initial settings must be done by an

authorised dealer or a specialist. It is recommended that all alterations

of the initial settings are also done by an authorised dealer or a

specialist.

• After initial installation, you may manually adjust the settings.

• The initial setting remains active until the user changes it.

• The Remote Controller can be used for multiple installations.

• Ensure the operation indicator is OFF before setting.

• The system may not work properly if set wrongly.

Please consult an authorised dealer.

To display <Main Menu>:

To select menu:

To confirm the selected content:

After the initial settings have been completed, you can select a quick menu from the following options and edit the setting.

1

Press

to display the quick menu.

Force DHW Powerful Quiet Force Heater

Weekly Timer Force Defrost Error Reset R/C Lock

2

Use to select menu.

3

Press to turn on/off the select menu.

Quick Menu

Menu Default Setting Setting Options / Display

1 Function setup

1.1

Weekly timer

Once the weekly timer is set

up, User can edit from Quick

Menu.

To set up to 6 patterns of

operation on a weekly basis.

• Disabled if Heat-Cool SW is

pressed or if Force Heater

is on.

Timer setup

Select day of the week and

set the patterns needed

(Time / Operation ON/OFF / Mode)

Timer copy

Select day of the week

11

English

Menu Default Setting Setting Options / Display

1.2

Holiday timer

To save energy, a holiday

period may be set to either turn

OFF the system or lower the

temperature during the period.

OFF

ON

Holiday start and end.

Date and time

OFF or lowered temperature

• Weekly timer setting may be temporarily disabled during Holiday timer setting

but it will be restored once the Holiday timer is completed.

1.3

Quiet timer

To operate quietly during the

preset period.

6 patterns may be set.

Level 0 means the mode is off.

Time to start Quiet :

Date and time

Level of quietness:

0 ~ 3

1.4

Room heater

To set the room heater ON

or OFF.

OFF

1.5

Tank heater

To set the tank heater ON or

OFF.

OFF

• Available only if connected to the tank.

1.6

Sterilization

To set the auto sterilization ON

or OFF.

OFF

• Available only if connected to the tank.

• Do not use the system during sterilization in order to prevent scalding with hot water, or overheating of shower.

• Ask an authorised dealer to determine the level of sterilization function field settings according to the local laws and

regulations.

2 System check

2.1

Energy monitor

Present or historical chart

of energy consumption,

generation or COP.

Present

Select and retrieve

Historical chart

Select and retrieve

• COP= Coefficient of Performance.

• For historical chart, the period is selected from 1 day/1 week/1year.

• Energy consumption (kWh) of heating, *

1

cooling, tank and total may be retrieved.

• The total power consumption is an estimated value based on AC 230 V and may

differ from value measured by precise equipment.

2.2

Water temperatures

Shows all water temperatures

in each area.

Actual water temperature of 8 items:

Inlet / Outlet / Zone 1 / Zone 2 / Tank / Buffer

tank / Solar / Pool

Select and retrieve

Menus

For user

Quick Menu / Menus

*1

The system is locked to operate without COOL mode. It can be unlocked only by authorised installers or our authorised service partners.

*2 Only displayed when COOL mode is unlocked (This means when COOL mode is available).

12

Menus

For user

Menu Default Setting Setting Options / Display

2.3

Error history

• Refer to Troubleshooting for

error codes.

• The most recent error code is

displayed at the top.

Select and retrieve

2.4

Compressor

Shows the compressor

performance.

Select and retrieve

2.5

Heater

Total hours of ON time for

Room heater/Tank heater.

Select and retrieve

3 Personal setup

3.1

Touch sound

Turns the operation sound

ON/OFF.

ON

3.2

LCD contrast

Sets the screen contrast.

3

3.3

Backlight

Sets the duration of screen

backlight.

1 min

3.4

Backlight intensity

Sets screen backlight

brightness.

4

3.5

Clock format

Sets the type of clock display.

24h

13

English

Menu Default Setting Setting Options / Display

3.6

Date & Time

Sets the present date and

time.

Year / Month / Day / Hour / Min

3.7

Language

Sets the display language for

the top screen.

• For Greek, please refer to the

English version.

ENGLISH / FRANÇAIS /

DEUTSCH / ITALIANO /

ESPAÑOL / DANISH /

SWEDISH / NORWEGIAN /

POLISH / CZECH /

NEDERLANDS / TÜRKÇE /

SUOMI / MAGYAR /

SLOVENŠČINA / HRVATSKI /

LIETUVIŲ

3.8

Unlock password

4 digit password for all the

settings.

0000

4 Service contact

4.1

Contact 1 / Contact 2

Preset contact number for

installer.

Select and retrieve

Menus

14

Menus

For installer

Menu Default Setting Setting Options / Display

5 Installer setup System setup

5.1

Optional PCB connectivity

To connect to the external PCB

required for servicing.

No

• If the external PCB is connected (optional), the system will have following additional functions:

1

Buffer tank connection and control over its function and temperature.

2

Control over 2 zones (including the swimming pool and the function to heat water in it).

3

Solar function (the solar thermal panels connected to either the DHW (Domestic Hot Water) Tank or the Buffer Tank.

4

External compressor switch.

5

External error signal.

6

SG ready control.

7

Demand control.

8

Heat-Cool SW

5.2

Zone & Sensor

To select the sensors and to

select either 1 zone or 2 zone

system.

Zone

• After selecting 1 or 2 zone system, proceed to

the selection of room or swimming pool.

• If the swimming pool is selected, the

temperature must be selected for

T temperature between 2 °C ~10 °C.

Sensor

* For room thermostat, there is a further

selection of external or internal.

5.3

Heater capacity

To reduce the heater power if

unnecessary.*

3 kW / 6 kW / 9 kW

* Options of kW vary

depending on the model.

5.4

Anti freezing

To activate or deactivate the

water freeze prevention when

the system is OFF.

Yes

5.5

Tank connection

To connect tank to the system.

No

5.6

Buffer tank connection

To connect tank to the system

and if selected YES, to set

T temperature.

• The optional PCB

connectivity must be selected

YES to enable the function.

• If the optional PCB

connectivity is not selected,

the function will not appear

on the display.

No

Yes

5 °C Set T for Buffer Tank

15

English

Menu Default Setting Setting Options / Display

5.7

Tank heater

To select external or internal

tank heater and if External is

selected, set a timer for the

heater to come on.

* This option is available if

Tank connection is selected

(YES).

Internal

External

0:20

Tank heater ON time

set.

5.8

Base pan heater

To select whether or not

optional base pan heater is

connected.

* Type A - The base pan heater

activates only during

deice operation.

* Type B -The base pan heater

activates when

outdoor ambient

temperature is 5 °C

or lower.

No

Yes

A

Set base pan heater

type*.

5.9

Alternative outdoor sensor

To select an alternative

outdoor sensor.

No

5.10

Bivalent connection

To select a bivalent connection

to allow an additional heat

source such as a boiler to

heat-up the buffer tank and

domestic hot water tank

when heatpump capacity is

insufficient at low outdoor

temperature. The bivalent

feature can be set-up either in

alternative mode (heatpump

and boiler operate alternately),

or in parallel mode (both

heatpump and boiler operate

simultaneously), or in advance

parallel mode (heatpump

operates and boiler turns on

for buffer-tank and/or domestic

hot water depending on the

control pattern setting options).

No

Yes

-5 °C

Set outdoor temperature

for turn ON Bivalent

connection.

Yes After selecting the outdoor temperature

Control pattern

Alternative / Parallel / Advanced parallel

• Select advanced parallel for bivalent use of

the tanks.

Menus

16

Menu Default Setting Setting Options / Display

Control pattern Advanced parallel

Heat Selection of the tank

• “Heat” implies Buffer Tank and “DHW” implies

Domestic Hot Water Tank.

Control pattern

Advanced parallel Heat Yes

• Buffer Tank is activated only after selecting

“Yes”.

-8 °C

Set the temperature

threshold to start the

bivalent heat source.

0:30

Delay timer to start the

bivalent heat source

(in hour and minutes).

-2 °C

Set the temperature

threshold to stop the

bivalent heat source.

0:30

Delay timer to stop the

bivalent heat source

(in hour and minutes).

Control pattern Advanced parallel DHW Yes

• DHW Tank is activated only after selecting

“Yes”.

0:30

Delay timer to start the

bivalent heat source

(in hour and minutes).

Menus

For installer

17

English

Menu Default Setting Setting Options / Display

5.11

External SW

No

5.12

Solar connection

• The optional PCB

connectivity must be selected

YES to enable the function.

• If the optional PCB

connectivity is not selected,

the function will not appear

on the display.

No

Yes

Buffer tank Selection of the tank

Yes After selecting the tank

10 °C Set

T ON temperature

Yes After selecting the tank T ON temperature

5 °C

Set

T OFF

temperature

Yes After selecting the tank T ON temperature T OFF temperature

5 °C

Set Antifreeze

temperature

Yes After selecting the tank T ON temperature T OFF temperature

After setting the antifreeze temperature

80 °C Set Hi limit

Menus

18

Menu Default Setting Setting Options / Display

5.13

External error signal

No

5.14

Demand control

No

5.15

SG ready

No

Yes

120 %

Capacity (1) & (2) of

Buffer Tank and DHW

Tank (in %)

5.16

External compressor SW

No

5.17

Circulation liquid

To select whether to circulate

water or glycol in the system.

Water

5.18

Heat-Cool SW

No

5.19

Force heater

To turn on Force heater either

manually (by default) or

automatically.

Manual

6 Installer setup Operation setup

To access to the four major

functions or modes.

4 main modes

Heat / *

1,

*

2

Cool / Auto / Tank

Menus

For installer

*1

The system is locked to operate without COOL mode. It can be unlocked only by authorised installers or our authorised service partners.

*2 Only displayed when COOL mode is unlocked (This means when COOL mode is available).

19

English

Menu Default Setting Setting Options / Display

Installer setup Operation setup

6.1

Heat

To set various water &

ambient temperatures for

heating.

Water temp. for heating ON /

Outdoor temp. for heating OFF /

T for heating ON /

Outdoor temp. for heater ON

Water temp. for heating ON

Compensation

curve

Heating ON

temperatures in

compensation curve or

direct input.

Water temp. for heating ON Compensation curve

X axis: -5 °C, 15 °C

Y axis: 55 °C, 35 °C

Input the 4 temperature

points

(2 on horizontal X axis,

2 on vertical Y axis).

• Temperature range: X axis: -15 °C ~ 15 °C, Y axis: See below

• Temperature range for the Y axis input depends on the model:

1. WH-MDC model : 20°C ~ 55°C

2. WH-MXC model : 20°C ~ 60°C

• If 2 zone system is selected, the 4 temperature points must also be input for Zone 2.

• “Zone 1” and “Zone 2” will not appear on the display if only 1 zone system.

Water temp. for heating ON Direct

35 °C

Temperature for heating

ON

• Min. ~ Max. range is conditional as follows:

1. WH-MDC model : 20°C ~ 55°C

2. WH-MXC model : 20°C ~ 60°C

Outdoor temp. for heating OFF

24 °C

Temperature for heating

OFF

Menus

20

Menu Default Setting Setting Options / Display

T for heating ON

5 °C

Set T for heating

ON.

Outdoor temp. for heater ON

0 °C

Temperature for

heater ON

6.2

*

1,

*

2

Cool

To set various water & ambient

temperatures for cooling.

Water temperatures for cooling ON

and

T for cooling ON.

Water temp. for cooling ON

Compensation curve

Cooling ON

temperatures in

compensation curve or

direct input.

Water temp. for cooling ON Compensation curve

X axis: 20 °C, 30 °C

Y axis: 15 °C, 10 °C

Input the 4 temperature

points

(2 on horizontal X axis,

2 on vertical Y axis)

• If 2 zone system is selected, the 4 temperature points must also be input for Zone 2.

• “Zone 1” and “Zone 2” will not appear on the display if only 1 zone system.

Water temp. for cooling ON Direct

10 °C

Set temperature for

Cooling ON

T for cooling ON

5 °C Set

T for cooling ON

Menus

For installer

*1

The system is locked to operate without COOL mode. It can be unlocked only by authorised installers or our authorised service partners.

*2 Only displayed when COOL mode is unlocked (This means when COOL mode is available).

La pagina si sta caricando...

Panasonic WHMDC12H6E5 Istruzioni per l'uso

Questo manuale è adatto anche per

Panasonic WHMDC12H6E5 Istruzioni per l'uso

in altre lingue

Documenti correlati

Altri documenti