Electrolux VAC140PLV Manuale utente

EVD14900

VACS140

EN

FR

DE

IT

Vacuum Drawer

Tiroir pour sous-vide

Vakuum-Lade

Cassetto per sottovuoto

Instructions

Mode d’emploi

Bedienungsanleitung

Istruzioni per l’uso

2

16

30

44

2 www.electrolux.com

CONTENTS

WE’RE THINKING OF YOU

Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings

with it decades of professional experience and innovation. Ingenious and stylish, it has

been designed with you in mind. So whenever you use it, you can be safe in the knowledge

that you’ll get great results every time. Welcome to Electrolux.

Visit our website to:

Receive advice, download our brochures, solve any anomaly and nd information

on technical support: www.electrolux.com

Register your product and receive a better service:

www.electrolux.com/productregistration

Purchase accessories, consumables and original spare parts for your appliance:

www.electrolux.com/shop

CUSTOMER SERVICE AND MAINTENANCE

We recommend always using original spare parts.

Always have the following information at hand when you contact customer services. You

can nd the following information on the rating plate: Model, appliance number (PNC),

serial number.

Warning/Attention - Important safety information.

Information and general recommendations.

Environmental information.

Subject to change without notice.

1. SAFETY INFORMATION ..................................................................................... 3

2. SAFETY INSTRUCTIONS ................................................................................... 4

3. PRODUCT DESCRIPTION ................................................................................. 6

4. CONTROL PANEL .............................................................................................. 6

5. BEFORE USING FOR THE FIRST TIME ............................................................ 7

6. DAILY USE .......................................................................................................... 7

7. CLEANING AND MAINTENANCE ..................................................................... 12

8. TROUBLESHOOTING ....................................................................................... 13

9. ENVIRONMENTAL CONSIDERATIONS .......................................................... 14

3ENGLISH

1. SAFETY INFORMATION

Carefully read the instructions before installing and

using the appliance. The manufacturer is not liable

for improper installation and use of the appliance that

may cause injuries and damage. Always keep the

instructions available for future reference.

1.1 Safety of children and vulnerable adults

• This appliance can be used by children aged 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge only if they are given supervision or

trained on how to use the appliance in a safe way and

understand the hazards involved.

• Children should not play with the appliance.

• Keep packaging materials away from children.

• Keep children and pets away from the appliance during

operation.

• Cleaning and maintenance should not be done by

children without supervision.

• Children under the age of 3 years must be ket away

unless constantly supervised.

1.2 Warnings on general safety

• Only qualied personnel can install the appliance and

replace the cables.

• Disconnect the appliance from the power supply before

carrying out any maintenance operation.

• Do not use steam cleaners to clean the appliance.

• Do not use abrasive detergents or metal scrapers to

clean the appliance.

• If the power cord is damaged it must be replaced by

the manufacturer, by an authorised technician or by a

qualied person to prevent hazardous situations.

4 www.electrolux.com

2. SAFETY INSTRUCTIONS

2.1 Installation

CAUTION!

The appliance must be installed

by qualied personnel only

• Remove the packaging material.

• Do not install or use the appliance if

damaged.

• Comply with the instructions supplied

with the appliance.

• Always pay attention when moving the

appliance. Always wear safety gloves.

• Do not turn the appliance upside down

or tilt it! This may cause oil to leak from

the pump and damage the equipment.

• Respect the minimum distance from

other appliances.

• Make sure the appliance is installed

and secured to a xed structure.

• The sides of the appliance must be

adjacent to other equipment or units

having the same height.

2.2 Electrical connection

CAUTION!

Risk of re and electric shock.

• All the electrical connections must be

made by a qualied electrician.

• The appliance must be earthed.

• Make sure that all the electrical data

shown on the data plate correspond

to those of the system. Otherwise,

contact an electrician.

• Always use an electrical outlet with a

correctly installed protective contact.

• Do not use multi-plug adapters or

extension cables.

• Make sure not to damage the mains

plug and the mains cable. If the power

cable must be replaced, this should be

carried out by our Assistance Centre.

• Shock protection devices must be

fastened in such a way that they

cannot be removed without tools.

• Connect the mains plug to the mains

socket only once installation has been

completed.

• Do not connect the mains plug if the

mains socket is loose.

• Do not pull the mains cable to

disconnect the appliance. Pull only the

mains plug.

• Use only suitable isolation devices:

circuit breakers, fuses (screw type

fuses must be removed from the fuse

holder), earth fault current releases

and relays.

• The electric system must be equipped

with an isolation device that allows

you to disconnect the appliance from

the mains at every pole. The isolation

device must have a contact opening

width of a minimum 3 mm.

• This appliance complies with the EEC

directives.

5ENGLISH

2.3 Use

CAUTION!

Risk of injury, burns, electric

shock or explosion.

• Do not touch the sealing bar after use.

Residual heat can cause burns.

• Use this appliance only in a household

environment.

• Do not modify the specications of this

appliance.

• Do not leave the appliance unattended

during operation.

• Turn the appliance o after use.

• Do not use the appliance with wet

hands or when it could come into

contact with water.

• Do not apply pressure on the drawer.

• Do not use the appliance as a work

surface or as a support surface.

• Avoid the presence of sparks or open

ames near the appliance when you

open the drawer.

Do not place or keep ammable liquids,

materials or objects on the appliance, or

inside or close to it.

CAUTION!

You may damage the appliance.

• Pay attention when you remove or

insert the accessories.

• Do not force the cover open during the

work cycle.

• Do not force the cover open during the

work cycle in the case of a power cut.

• Do not place any weight on the cover.

• Prevent any object from falling on

the cover! This can compromise the

integrity, causing cracks or damage.

2.4 Cleaning and maintenance

CAUTION!

There is a risk of injury, re or

damage.

• Before carrying out any maintenance

operation, turn the appliance o and

disconnect the plug from the mains

socket.

• Check that the appliance is cold.

2.5 Disposing of the appliance

CAUTION!

Risk of injury and choking.

• Disconnect the plug from the power

supply.

• Remove the mains cable and dispose

of it.

2.6 Technical Assistance

• Contact the authorised Assistance

Centre to repair the appliance.

• Only use original spare parts.

6 www.electrolux.com

3. PRODUCT DESCRIPTION

1

Cover

2

Sealing cushion

3

Control panel

4

Sealing bar

5

Front panel

6

Tank

7

Suction nozzle

8

Filler plate

9

Fitting for external vacuum

10

Pouches for freezing, cooking and

storage

25 pouches 20x30 cm

25 pouches 25x35 cm

11

Oil lter

12

Cap

4. CONTROL PANEL

1

MARINADE/INFUSION button

2

SEALING time indicator

3

SEALING time button

4

VACUUM level indicator

5

VACUUM level button

6

START/STOP button

7

ON/OFF button

1

2

3

4

5

6

7

1

3

4

5

67

2

8

9

10

11

12

7ENGLISH

5. BEFORE USING FOR THE FIRST TIME

CAUTION!

Refer to the chapters on safety.

CAUTION!

Pour the oil in the machine before

installation.

CAUTION!

Comply with the instructions

supplied with the appliance.

CAUTION!

The plastic cap

12

removed

during installation must be kept

for future assistance.

5.1 Cleaning for the rst time

• Refer to the "CLEANING AND

MAINTENANCE" chapter.

• Wipe all parts with a damp cloth before

the rst use.

5.2 First use

Turn the appliance on while holding

down the button.

Proceed with the

RECONDITIONING CYCLE

before use as described below:

• Hold down the button until all the

buttons ash.

• Close the cover with light pressure.

• Press the button. The and

buttons ash while the program runs.

• At the end of the cycle (15 minutes)

the button will stop ashing and the

appliance will be ready for use.

6. DAILY USE

This product is ideal for:

• Vacuum food packaging for

“SousVide” low temperature cooking.

• Vacuum packaging for food

preservation.

• Food marinade/infusion.

8 www.electrolux.com

Button Description Function

ON/OFF button Turning the appliance on/o.

START/STOP button To start/stop the packaging cycle.

VACUUM button Set one of the 4

vacuum levels

available.

The preset value is

MAX.

only sealing

MIN.

MED.

MAX.

Button

SEALING

Set the sealing

time according to

the thickness of the

pouch

1)

.

The appliance

is preset to 2.5

s, which is the

ideal time for the

pouches provided.

disabled

1.5 s

2.5 s

4.0 s

MARINADE/

INFUSION button

To activate the marinating/infusion

function.

1)

The thicker the pouch, the longer the set time.

• Open the drawer completely.

• Turn the appliance on while holding

down the button.

• If necessary, modify the vacuum level

and the sealing time.

• Lift the cover and place the pouch

containing the food to be packed inside

the tank, leaving at least 2 cm beyond

the sealing bar.

• It is important not to soil the pouch in

the sealing area so as to guarantee

a perfect seal. For this reason it is

advisable to fold the inner side of the

pouch outwards by 4-5 cm. Once the

food is inserted, fold the pouch again

in its initial condition.

• For small products, use the supplied

ller plate, as it helps position the

pouch in the correct position with

respect to the sealing bar.

• Close the cover with light pressure

and press the button which begins

to ash. The packaging cycle will then

start.

• The button stops ashing at the end of

this cycle.

• Open the cover and remove the pouch.

Do not touch the sealing bar after

use. Residual heat can cause

burns.

• Turn the appliance o while holding

down the button.

If the appliance is not used

for 60 minutes it switches o

automatically.

9ENGLISH

Liquid food

If the button is pressed during

operation, the cycle stops and the pouch

is immediately sealed. This procedure

must be used for packing liquid products,

which may boil during the vacuum cycle.

Note: Periodically, the appliance

automatically performs a

reconditioning cycle (see Chap.

6.5) during which the and

buttons ash.

Allow the cycle to run without

intervening on the appliance until

the 2 buttons will stop ashing.

Depending on the food to be packed, it is advisable to set the vacuum level as shown

in the table:

Vacuum level

Use

Package and divide into portions without creating

vacuum.

1)

Package and divide into portions of particularly delicate

food (salad, tomatoes, etc.) with the minimum vacuum

level (MIN).

- Package and divide delicate food into portions.

(cooked vegetables, fruit, tender meat, pasta) and liquid

food (soup, cream, sauce).

- Marinate in the pouch.

- Vacuum cook (SousVide) delicate food (e.g. sh) with

the medium vacuum level (MED).

- Package and divide solid food into portions

(raw vegetables, hard cheese, cold cuts).

- Vacuum cook (SousVide) solid food (e.g. meat,

potatoes, carrots, etc.) with the maximum vacuum level

(MAX).

- Airtight sealing of glass jars (see chap. 6.5).

1)

This function still produces light vacuum inside the pouch.

10 www.electrolux.com

6.1 Using the pouches

The pouches provided are ideal for

freezing, storage and cooking vacuum

packed food at low temperatures.

Pouches order code: 902979705

50 pouches for freezing, vacuum cooking

and storage

(25 pieces, dimensions: 20x30 cm + 25

pieces, dimensions: 25x35 cm)

Pouches order code: 9029793941

50 pouches for vacuum cooking and

storage

(25 pieces, dimensions: 20x30 cm + 25

pieces, dimensions: 25x35 cm)

It is recommended to use original

pouches.

www.electrolux.com/shop

6.2 Vacuum food packaging

for “SousVide” low temperature

cooking

With this method, the food sealed in the

vacuum pouch is then cooked slowly at

low temperature.

The benets provided are many:

• the avour and texture of the remains

unaltered.

• both avour and aromas are

preserved, as the cooking process

does not disperse them.

• the reduced loss of liquid makes the

food softer and less dry.

• nutrients like minerals and vitamins are

preserved.

• You don't need to add oils or fats for

cooking.

6.3 Vacuum packaging for food

preservation

Vacuum packing extends food

preservation.

If you wish to vacuum pack freshly

cooked food, it must rst be chilled,

possibly using a blast chiller.

6.4 Marinades/infusion

• Turn the appliance on while holding

down the button.

• Place the food with the marinade in a

generic pan/dish.

• Lift the cover and place the pan in the

tank.

• Press the button, which will start

to ash.

• Close the cover with light pressure.

• Press the button to start the

marinade cycle. This button will start

to ash.

• This button will stop ashing once the

marinating cycle is completed.

• The cover can then be opened and the

pan removed.

The marinating and infusion cycle has a

preset time of 8 minutes.

Increase the infusion and repeat the

cycle.

This infusion can be deactivated at any

time by pressing the button.

You can marinate food directly in

the pouch.

In this case, set the relevant

vacuum level.

11ENGLISH

6.5 Additional functions

“Airtight sealing of glass jars”

This is the function for the airtight sealing

of glass jars to be used for jar-cooking or

for increasing the shelf-life of the product

(jars not provided with this appliance).

• Set the maximum vacuum level

and disable the sealing .

• Close the jar with slight pressure

and put it in the tank, close the cover

exerting slight pressure, and press the

button which will start to ash. The

packaging cycle will then start.

• The button stops ashing at the end of

this cycle.

“External vacuum”

It is to be used to eliminate the air inside

special air-tight containers (not supplied

with this appliance).

9

• For the external vacuum, tighten the

tting

9

provided, inside the tank.

• Connect the container pipe to the

tting

9

.

• Set the maximum vacuum level

and disable the sealing .

• With the appliance cover open press

the button to start the packaging

cycle. This button will start to ash.

• The button stops ashing at the end of

this cycle.

“Reconditioning cycle”

This function is used in the following

situations:

• Before using the appliance for the rst

time.

• After extensive downtime.

• After having sealed products with high

humidity content (e.g. soups).

• When you notice a decrease in

appliance performance (e.g. more time

to vacuum or it does not vacuum at

all).

This program lasts about 15 minutes and

guarantees the complete cleaning of the

pump, removing any liquid emulsion that

might be found in the oil.

Do not seal any product while this

program is running.

Proceed as follows:

• Hold down the button until all the

buttons ash.

• Close the cover with light pressure.

• Press the button. The and

buttons ash while the program runs.

• At the end of the cycle (15 minutes)

the button will stop ashing and the

appliance will be ready for use.

12 www.electrolux.com

7. CLEANING AND MAINTENANCE

CAUTION!

Refer to the chapters on safety.

• Clean the appliance after each use

with a damp and soft cloth.

1

4

6

• Clean the Plexiglas cover

1

inside

and out using only neutral detergents

(water and soap).

• Do not use abrasive products, alcohol-

based detergents, abrasive sponges,

solvents or metal objects.

• Follow the safety instructions indicated

on the packaging when using products

to clean the steel tank

6

.

• Clean the tank

6

, especially in the

case of residue liquid, it is advisable to

remove the sealing bar

4

upwards.

• Clean the sealing bar

4

with a dry cloth.

Remove any residue that deposits on

the bar.

• Clean the metal surfaces using normal

detergents suitable for stainless steel.

13ENGLISH

8. TROUBLESHOOTING

CAUTION!

Refer to the chapters on safety.

8.1 What to do if…

Problem Possible cause Solution

The pouch is not

sealed correctly.

The sealing time is not correct. Change the sealing time.

The cover gasket is dirty or

worn.

Clean or replace the cover

gasket (contact the Technical

Assistance Service for a

replacement).

The pouch is not placed

correctly on the sealing bar.

Position the pouch correctly.

The sealing bar is worn (the

Teon coating is burnt).

Replace the sealing bar (contact

the Technical Assistance

Service for a replacement).

The blade placed under the

Teon of the sealing bar is

broken.

Replace the blade (contact the

Technical Assistance Service for

a replacement).

Final vacuum is

poor.

The set vacuum level is not

correct.

Change the vacuum level.

The cover gasket is dirty or

worn.

Clean or replace the cover

gasket (contact the Technical

Assistance Service for a

replacement).

The cover is not closed

correctly.

Close the cover correctly.

Make sure that objects or dirt

are not found between the cover

and tank.

The cover does

not open.

No power supply. Wait until the power supply is

restored.

The cover is

cracked or

broken.

Damaged cover. Replace the cover (contact the

Technical Assistance Service for

a replacement).

The and

buttons ash.

“Reconditioning cycle”

in progress.

Wait for the end of the

“reconditioning cycle” (15

minutes).

The machine

turns o and the

pump activates

automatically

after the cover is

closed.

The oil reconditioning program

has been automatically

activated (see note cap. 6).

Wait for the end of the

“reconditioning cycle” (15

minutes).

14 www.electrolux.com

The vacuum

cycle starts,

activiating the

vacuum pump,

but then stops

within a few

seconds without

evacuating the

thank or sealing

the bag.

The cover has not been closed. Apply light pressure to the top

of the cover to create an airtight

seal.

The cover gasket is dirty or

worn.

Clean the gasket.

Replace the gasket.

Alarm messages

Alarm Possible cause Solution

The button will

ash continuously.

The electrical board

is faulty.

Contact the Technical

Assistance Service.

The button will

ash continuously.

The vacuum is not produced. Clean or replace the cover

gasket.

(contact the Technical

Assistance Service to replace it).

Make sure the cover closes

correctly.

Press the button to reset the

alarm.

The and

buttons ash

continuously.

The pump oil

must be replaced.

Contact the Technical

Assistance Service.

The button

ashes

continuously.

The packaging cycle is

terminated in advance

because a wet product is

being packaged.

Press the button to reset the

alarm.

9. ENVIRONMENTAL CONSIDERATIONS

Recycle materials that carry this symbol

.

Dispose of the packaging in special

containers for recycling. Help protect

the environment and human health and

recycle waste deriving from electric and

electronic devices.

Do not dispose of appliances that carry

this symbol together with domestic

waste.

Return the product to your local recycling

facility or contact your municipal oce.

8.2 Assistance Data

If it is not possible to nd a solution to

the problem, contact the authorised

Assistance Centre.

The information required for the

Assistance Centre is found on the data

plate on the left side of the appliance. Do

not remove the data plate.

15ENGLISH

16 www.electrolux.com

TABLE DES MATIÈRES

PENSÉS POUR VOUS

Merci d'avoir acheté un appareil Electrolux. Vous avez choisi un produit ayant des

décennies d'expérience professionnelle et d'innovation. Ingénieux et élégant, il a été

projeté en pensant à vous. Donc si, à tout moment vous souhaitez l'utiliser, vous pouvez

être certains d'obtenir toujours les meilleurs résultats. Bienvenus chez Electrolux.

Visitez notre site Internet pour:

Recevoir des conseils, télécharger nos brochures, éliminer d'éventuelles

anomalies, obtenir des informations sur l'assistance : www.electrolux.com

Enregistrer vos produit et recevoir un meilleur service :

www.electrolux.com/productregistration

Acheter des accessoires, matériels de consommation et pièces de rechange

originales pour votre appareil : www.electrolux.com/shop

SERVICE CLIENTS ET ENTRETIEN

Nous vous conseillons d’utiliser des pièces de rechange d’origine.

Lorsqu'on contacte l'Assistance, s'assurer de disposer des données suivantes. Les

informations se trouvent sur la plaque d'identication : Modèle, numéro de l’appareil (PNC),

numéro de série.

Mise en garde/Attention - Informations de sécurité Importantes.

Informations et suggestions générales.

Informations sur l'environnement.

Sous réserve de modications.

1. CONSIGNES FONDAMENTALES DE SÉCURITÉ ........................................... 17

2. INSTRUCTIONS POUR LA SÉCURITÉ ............................................................ 18

3. DESCRIPTION DU PRODUIT ........................................................................... 20

4. TABLEAU DE COMMANDE .............................................................................. 20

5. PRÉPARATION À LA PREMIÈRE UTILISATION ............................................. 21

6. UTILISATION QUOTIDIENNE ........................................................................... 21

7. NETTOYAGE ET ENTRETIEN .......................................................................... 26

8. RÉSOLUTION DES PROBLÈMES.................................................................... 27

9. CONSIDÉRATIONS SUR L'ENVIRONNEMENT .............................................. 28

17FRANÇAIS

1. CONSIGNES FONDAMENTALES DE SÉCURITÉ

Lire attentivement les instructions fournies avant

d'installer et d’utiliser l'appareil. Le fabricant n'est pas

responsable si une installation et une utilisation non

correcte de l'appareil provoquent des lésions et des

dommages. Garder toujours les instructions à portée de

main comme référence future.

1.1 Sécurité des enfants et des personnes

vulnérables

• Cet appareil peut être utilisé par des enfants de plus

de 8 ans et par des adultes ayant des capacités

physiques, sensorielles ou mentales limitées ou ayant

une expérience ou connaissance insusante sur

l'utilisation de l'appareil, seulement s’ils sont surveillés

ou instruits relativement à l'utilisation de l'appareil et

s'ils ont compris les risques impliqués.

• Ne pas permettre aux enfants de jouer avec l'appareil.

• Garder les matériaux d'emballage hors de portée des

enfants.

• Tenir les enfants et les animaux domestiques éloignés

de l'appareil pendant le fonctionnement.

• Le nettoyage et les interventions d'entretien ne doivent

pas être eectués par des enfants sans supervision.

• Tenir les enfants de moins de 3 ans éloignés s’ils ne

sont pas constamment surveillés.

1.2 Mises en garde de sécurité générales

• L'installation de l'appareil et le remplacement des

câbles doivent être eectués uniquement par du

personnel qualié.

• Avant d'eectuer toute intervention d’entretien,

déconnecter l'appareil du réseau électrique.

• Ne pas utiliser de nettoyeur vapeur pour nettoyer

l'appareil.

• Ne pas utiliser de détergents abrasifs ni de raclette en

métal pour nettoyer l'appareil.

• Si le câble d'alimentation est endommagé, il doit être

remplacé par le fabricant, un technicien autorisé ou une

personne qualiée, pour éviter des situations de danger.

18 www.electrolux.com

2. INSTRUCTIONS POUR LA SÉCURITÉ

2.1 Installation

ATTENTION !

L'installation de l'appareillage doit

être eectuée par du personnel

qualié.

• Ôter tous les matériaux d'emballage.

• Ne pas installer ni utiliser l'appareil s’il

est endommagé.

• Se conformer aux instructions fournies

avec l'appareil.

• Faire toujours attention en phase de

déplacement de l'appareil. Toujours

porter des gants de sécurité.

• Ne pas retourner ni incliner l'appareil !

Cela fera sortir l’huile de la pompe, ce

qui pourrait endommager l'appareil.

• Il est nécessaire de respecter

la distance minimum des autres

appareils.

• S'assurer que l'appareil soit installé et

adéquatement ancré à une structure

xe.

• Les côtés de l'appareil doivent rester

adjacents à des appareils ou unités

ayant la même hauteur.

2.2 Raccordement électrique

ATTENTION !

Risque d'incendie et de décharge

électrique.

• Tous les raccordements électriques

doivent être réalisés par un électricien

qualié.

• L'appareil doit disposer d'une mise à

la terre.

• S’assurer que les données électriques

reportées sur la plaque des données

correspondent à celles de l'installation.

Dans le cas contraire, contacter un

électricien.

• Utiliser toujours une prise électrique

avec contact de protection

correctement installée.

• Ne pas utiliser de prises multiples ni de

rallonges.

• S’assurer de ne pas endommager la

prise ni le câble. Si le câble électrique

doit être remplacé, l'intervention

devra être eectuée par notre Centre

d'Assistance.

• Les dispositifs de protection contre

les décharges électriques doivent être

xés de telle à ne pas pouvoir être

désactivés sans outils.

• Insérer la che d'alimentation dans la

prise seulement à la n de l'installation.

• Si la che de courant est desserrée, ne

pas la relier à la prise.

• Ne pas tirer sur le câble d'alimentation

pour débrancher l'appareil. Tirer

seulement la che.

• Se servir uniquement de dispositifs

d'isolation adéquats : interrupteurs

automatiques, fusibles (ceux à

bouchon doivent être ôtés du porte-

fusible), déclencheurs pour courants

de panne à la terre et relais.

• Le circuit électrique doit être doté d'un

dispositif d'isolation permettant de

déconnecter l'appareil de la prise de

courant à tous les pôles. Le dispositif

d'isolation doit avoir une largeur de

l'ouverture de contact non inférieur à 3

mm.

• Cet appareil est conforme aux

directives CEE.

19FRANÇAIS

2.3 Utilisation

ATTENTION !

Risque de lésions, brûlures,

décharges électriques ou

explosions.

• Ne pas toucher la barre de soudure

après l'utilisation. La chaleur résiduelle

peut causer des brûlures.

• Utiliser l'appareil exclusivement dans

un environnement domestique.

• Ne pas apporter de modications aux

spécications de cet appareil.

• Ne jamais laisser l'appareil

sans surveillance pendant le

fonctionnement.

• Éteindre l'appareil après chaque

utilisation.

• Ne pas mettre en marche l'appareil

avec les mains humides ou s’il y a un

contact avec de l'eau.

• Ne pas exercer de pression sur le

tiroir.

• Ne pas utiliser l'appareil comme

surface de travail ou comme plan

d'appui.

• Éviter la présence d'étincelles ou de

ammes ouvertes près de l'appareil

lorsqu’on ouvre le tiroir.

Ne pas poser ni laisser de liquides ou

matériaux inammables, ni d’objets

facilement inammables sur l'appareil, à

l’intérieur ou à proximité.

ATTENTION !

Il y a le risque d'endommager

l'appareil.

• Faire attention lorsqu'on enlève ou

insère les accessoires.

• Ne pas forcer l'ouverture du couvercle

pendant le cycle de travail.

• Ne pas forcer l'ouverture du couvercle

pendant le cycle de travail en

l’absence d'énergie électrique.

• N’appuyer aucun poids sur le

couvercle.

• Éviter de faire tomber un objet sur le

couvercle ! Cela pourrait altérer son

intégrité, en causant des ssures ou

une rupture.

2.4 Nettoyage et entretien

ATTENTION !

Il y a le risque de lésions,

d’incendie ou de dommages à

l'appareil.

• Avant d'eectuer toute intervention

d'entretien, éteindre l'appareil et

extraire la che de la prise.

• Contrôler que l'appareillage soit froid.

2.5 Élimination

ATTENTION !

Risque de lésions ou étouement.

• Détacher la che de l'alimentation

électrique.

• Couper le câble de réseau et l'éliminer.

2.6 Assistance technique

• Pour réparer l'appareil, contacter le

Centre d'Assistance autorisé.

• Utiliser exclusivement des pièces de

rechange originales.

20 www.electrolux.com

3. DESCRIPTION DU PRODUIT

1

Couvercle

2

Coussin d'étanchéité

3

Panneau de commandes

4

Barre de soudure

5

Panneau avant

6

Cuve

7

Buse d'aspiration

8

Plaque de remplissage

9

Raccord pour sous-vide extérieur

10

Sachets pour surgélation, cuisson et

conservation

N. 25 20x30 cm

N. 25 25x35 cm

11

Filtre pour l’huile

12

Bouchon

4. TABLEAU DE COMMANDE

1

Bouton MARINAGE/INFUSION

2

Indicateur temps de SOUDURE

3

Bouton temps de SOUDURE

4

Indicateur niveau de SOUS-VIDE

5

Bouton niveau de SOUS-VIDE

6

Bouton DÉMARRAGE/ARRÊT

7

Bouton ALLUMAGE/ARRÊT

1

2

3

4

5

6

7

1

3

4

5

67

2

8

9

10

11

12

La pagina sta caricando ...

Electrolux VAC140PLV Manuale utente

Electrolux VAC140PLV Manuale utente

in altre lingue

Documenti correlati

Altri documenti