Aeg-Electrolux SZ91804-4I Manuale utente

Marca: Aeg-Electrolux

Modello: SZ91804-4I

Tipo: Manuale utente

SANTO Z 9 18 04-4i

User manual Fridge

Istruzioni per l’uso Frigorifero

Thank you for choosing one of our high-quality products.

To ensure optimal and regular performance of your appliance please read this

instruction manual carefully. It will enable you to navigate all processes perfectly

and most efficiently. To refer to this manual any time you need to, we recommend

you to keep it in a safe place. And please pass it to any future owner of the

appliance.

We wish you much joy with your new appliance.

CONTENTS

SAFETY INFORMATION 2

Children and vulnerable people safety 3

General safety 3

Daily Use 4

Care and cleaning 4

Installation 4

Service 5

CONTROL PANEL 5

Switching on the fridge 5

Switching off the fridge 5

Temperature setting buttons 6

Temperature indicator 6

Temperature regulation 6

TURBO COOLMATIC function 6

FIRST USE 7

Cleaning the interior 7

DAILY USE 7

Movable shelves 7

Positioning the door shelves 7

Positioning the door half shelf 7

Carbon Air Filter 8

LONGFRESH Compartment 8

Humidity control 9

Longfresh drawers 9

Storage time in the longfresh 0°C

compartment for fresh food 10

HELPFUL HINTS AND TIPS 11

Hints for energy saving 11

Hints for fresh food refrigeration 11

Hints for refrigeration 12

CARE AND CLEANING 12

Periodic cleaning 12

Replacing the carbon filter 13

Defrosting of the refrigerator 13

Periods of non-operation 13

WHAT TO DO IF… 14

Replacing the lamp 15

Closing the door 15

TECHNICAL DATA 16

INSTALLATION 16

Positioning 16

Electrical connection 16

Ventilation requirements 17

Installation of the carbon air filter 17

Installing the appliance 18

ENVIRONMENTAL CONCERNS 22

Subject to change without notice

SAFETY INFORMATION

In the interest of your safety and to ensure the correct use, before installing and first using

the appliance, read this user manual carefully, including its hints and warnings. To avoid

unnecessary mistakes and accidents, it is important to ensure that all people using the ap-

pliance are thoroughly familiar with its operation and safety features. Save these instruc-

tions and make sure that they remain with the appliance if it is moved or sold, so that ev-

eryone using it through its life will be properly informed on appliance use and safety.

2 Contents

For the safety of life and property keep the precautions of these user's instructions as the

manufacturer is not responsible for damages caused by omission.

Children and vulnerable people safety

• This appliance is not intended for use by persons (including children) with reduced physi-

cal, sensory or mental capabilities, or lack of experience and knowledge, unless they have

been given supervision or instruction concerning use of the appliance by a person re-

sponsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

• Keep all packaging well away from children. There is risk of suffocation.

• If you are discarding the appliance pull the plug out of the socket, cut the connection

cable (as close to the appliance as you can) and remove the door to prevent playing chil-

dren to suffer electric shock or to close themselves into it.

• If this appliance featuring magnetic door seals is to replace an older appliance having a

spring lock (latch) on the door or lid, be sure to make that spring lock unusable before

you discard the old appliance. This will prevent it from becoming a death trap for a child.

General safety

CAUTION!

Keep ventilation openings clear of obstruction.

• The appliance is intended for keeping foodstuff and/or beverages in a normal household

as explained in this instruction booklet.

• Do not use a mechanical device or any artificial means to speed up the thawing process.

• Do not use other electrical appliances (such as ice cream makers) inside of refrigerating

appliances, unless they are approved for this purpose by the manufacturer.

• Do not damage the refrigerant circuit.

• The refrigerant isobutane (R600a) is contained within the refrigerant circuit of the appli-

ance, a natural gas with a high level of environmental compatibility, which is neverthe-

less flammable.

During transportation and installation of the appliance, be certain that none of the com-

ponents of the refrigerant circuit become damaged.

If the refrigerant circuit should become damaged:

– avoid open flames and sources of ignition

– thoroughly ventilate the room in which the appliance is situated

• It is dangerous to alter the specifications or modify this product in any way. Any damage

to the cord may cause a short-circuit, fire and/or electric shock.

WARNING!

Any electrical component (power cord, plug, compressor) must be replaced by a certified

service agent or qualified service personnel.

1. Power cord must not be lengthened.

2. Make sure that the power plug is not squashed or damaged by the back of the appli-

ance. A squashed or damaged power plug may overheat and cause a fire.

3. Make sure that you can come to the mains plug of the appliance.

4. Do not pull the mains cable.

Safety information

5. If the power plug socket is loose, do not insert the power plug. There is a risk of elec-

tric shock or fire.

You must not operate the appliance without the lamp cover

of interior lighting.

• This appliance is heavy. Care should be taken when moving it.

• Do not remove nor touch items from the freezer compartment if your hands are damp/

wet, as this could cause skin abrasions or frost/freezer burns.

• Avoid prolonged exposure of the appliance to direct sunlight.

•

Bulb lamps

used in this appliance are special purpose lamps selected for household ap-

pliances use only. They are not suitable for household room illumination.

Daily Use

• Do not put hot pot on the plastic parts in the appliance.

• Do not store flammable gas and liquid in the appliance, because they may explode.

•

Do not place food products directly against the air outlet on the rear wall.

• Frozen food must not be re-frozen once it has been thawed out.

• Store pre-packed frozen food in accordance with the frozen food manufacturer's in-

structions.

• Appliance's manufacturers storage recommendations should be strictly adhered to. Refer

to relevant instructions.

• Do not place carbonated or fizzy drinks in the freezer compartment as it creates pressure

on the container, which may cause it to explode, resulting in damage to the appliance.

• Ice lollies can cause frost burns if consumed straight from the appliance.

Care and cleaning

• Before maintenance, switch off the appliance and disconnect the mains plug from the

mains socket.

• Do not clean the appliance with metal objects.

• Do not use sharp objects to remove frost from the appliance. Use a plastic scraper.

• Regularly examine the drain in the refrigerator for defrosted water. If necessary, clean

the drain. If the drain is blocked, water will collect in the bottom of the appliance.

Installation

For electrical connection carefully follow the instructions given in specific paragraphs.

• Unpack the appliance and check if there are damages on it. Do not connect the appli-

ance if it is damaged. Report possible damages immediately to the place you bought it.

In that case retain packing.

• It is advisable to wait at least four hours before connecting the appliance to allow the oil

to flow back in the compressor.

• Adequate air circulation should be around the appliance, lacking this leads to overheat-

ing. To achieve sufficient ventilation follow the instructions relevant to installation.

• Wherever possible the back of the product should be against a wall to avoid touching or

catching warm parts (compressor, condenser) to prevent possible burn.

• The appliance must not be located close to radiators or cookers.

1) If the lamp cover is foreseen.

2) If the lamp is foreseen.

3) If the appliance is Frost Free.

4 Safety information

• Make sure that the mains plug is accessible after the installation of the appliance.

•

Connect to potable water supply only.

Service

• Any electrical work required to do the servicing of the appliance should be carried out by

a qualified electrician or competent person.

• This product must be serviced by an authorized Service Centre, and only genuine spare

parts must be used.

Environment Protection

This appliance does not contain gasses which could damage the ozone layer, in either its

refrigerant circuit or insulation materials. The appliance shall not be discarded together

with the urban refuse and rubbish. The insulation foam contains flammable gases: the ap-

pliance shall be disposed according to the applicable regulations to obtain from your local

authorities. Avoid damaging the cooling unit, especially at the rear near the heat exchang-

er. The materials used on this appliance marked by the symbol

are recyclable.

CONTROL PANEL

1 2 3 4 5 6 7

1 Fridge Pilot light

2 Fridge ON/OFF switch

3 Fridge temperature regulator, + button

4 Fridge temperature indicator

5 Fridge temperature regulator, - button

6 TURBO COOLMATIC indicator

7 TURBO COOLMATIC button

Switching on the fridge

1. Insert the plug into the mains socket.

2. Press ON/OFF switch .

3. The Pilot Light will light up.

Switching off the fridge

1. Keep ON/OFF switch pressed for more than 5 seconds.

2. A countdown on the temperature indicator, from -3 -2 -1 will be shown. When “1” ap-

pears the fridge is turned off. The temperature indicator switches off. The Pilot light

switches off.

4) If a water connection is foreseen.

Control panel 5

Temperature setting buttons

The temperature is adjusted using the temperature setting buttons. These buttons are con-

nected to the temperature indicator.

• The temperature indicator is switched over from the indicator of the ACTUAL tempera-

ture (Temperature indicator is illuminated) to the indicator of the DESIRED temperature

(Temperature indicator flashes) by pressing one of the Temperature setting buttons.

• Each time one of the two buttons is pressed again the DESIRED temperature is adjusted

by 1°C. The DESIRED temperature must be reached within 24 hours.

If neither button is pressed, the temperature indicator automatically switches back after a

short period (approx. 5 sec.) to the indicator of the ACTUAL temperature.

DESIRED temperature means:

The temperature that has been selected for inside the fridge. The DESIRED temperature is

indicated by flashing numbers.

ACTUAL temperature means:

The temperature indicator shows the current temperature inside the fridge. The ACTUAL

temperature is indicated with illuminated numbers.

Temperature indicator

The temperature indicator shows several information:

• During normal operation, the temperature currently present in the fridge (ACTUAL tem-

perature) is displayed.

• When the temperature is being adjusted a flashing display indicates the fridge tempera-

ture currently set (DESIRED temperature).

When changing the temperature setting wait about 24 hours until the temperature display

has stabilised.

Temperature regulation

To operate the appliance, proceed as follows:

1. Set the required temperature by pressing the corresponding temperature regulator. The

temperature indicator will immediately show the changed setting (DESIRED tempera-

ture) and the temperature indicator flashes.

2. Each time the temperature regulator is pressed the DESIRED temperature is adjusted by

1 °C. The DESIRED temperature must be reached within 24 hours.

3. Once the required temperature has been set, after a short period (approx. 5 sec.) the

temperature indicator will show again the current ACTUAL temperature inside the cor-

responding compartment. The temperature indicator will change from flashing to con-

tinuous illumination.

For a correct storage of the food the following temperature should be set:

• +5 °C in the fridge

When the setting is changed, the compressor does not start immediately if automatic de-

frosting is currently taking place. As the storage temperature within the fridge is reached

quickly you can store food immediately after switching on.

TURBO COOLMATIC function

The TURBO COOLMATIC function is suited for quick cooling of large quantities of goods in

the refrigerator.

6 Control panel

To activate the function, do these steps:

1. Press the TURBO COOLMATIC button.

2. The TURBO COOLMATIC indicator switches on.

The TURBO COOLMATIC function now provides for intensive cooling. A DESIRED tempera-

ture of +3°C is automatically selected.

The TURBO COOLMATIC function is ended automatically after a period of 6 hours.

You can deactivate the function at any time:

1. Press the TURBO COOLMATIC button.

2. The TURBO COOLMATIC indicator switches off.

FIRST USE

Cleaning the interior

Before using the appliance for the first time, wash the interior and all internal accessories

with lukewarm water and some neutral soap so as to remove the typical smell of a brand-

new product, then dry thoroughly.

Do not use detergents or abrasive powders, as these will damage the finish.

DAILY USE

Movable shelves

The walls of the refrigerator are equipped with a

series of runners so that the shelves can be posi-

tioned as desired.

For better use of space, the front half-shelves can

lie over the rear ones.

Positioning the door shelves

To permit storage of food packages of various sizes, the door shelves can be placed at dif-

ferent heights.

Positioning the door half shelf

The door half shelf can be placed at different heights.

To make these adjustments proceed as follow:

First use 7

1. lift the shelf with the door half shelf up-

wards and out of the holders in the door

2. remove the retaining bracket out of the

guide under the shelf

3. Reverse the above operation to insert the

half shelf at a different height.

Carbon Air Filter

Your appliance is equipped with a carbon filter

CLEAN AIR CONTROL behind a flap in the rear wall

of the fridge compartment.

The filter purifies the air from unwanted odours in

the fridge and LONGFRESH compartment meaning

that the storage quality will be further improved.

During the operation, always keep the air ventila-

tion flap closed.

LONGFRESH Compartment

In the LONGFRESH 0°C compartment the temperature is controlled automatically. It stays

constantly at about 0°C, no adjustment is necessary.

The constant storage temperature of about 0°C and the relative humidity of between 45

and 90 % provide optimal conditions for the various kinds of food.

You can therefore store a variety of fresh food in the LONGFRESH 0°C compartment, where

it will last up to 3 times longer with better quality compared to normal refrigerator com-

partments. This allows you to stock more fresh food. Taste, degree of freshness, quality and

nutritional values (vitamins and minerals) are well preserved. Loss of weight in vegetables

and fruit diminishes. Food yields a higher degree of nutritional value.

The LONGFRESH 0°C compartment is also suitable for defrosting food.

In this case the thawed food can be stored up to two days .

8 Daily use

Humidity control

Both drawers can be used according to the de-

sired storage conditions independently of each

other with lower or higher humidity.

Regulation for each drawer is separate and is con-

trolled using the slide valve at the front of the

drawer.

• „Dry“: low air humidity - up to 50 % relative

humidity

This humidity level is reached when both sliders are set into this position

and the ven-

tilation openings are wide open.

• Humid“: high relative humidity - up to 90%

This humidity level is reached when both sliders are set in this position

and the

ventilation openings are closed. Humidity is kept and can not escape.

Longfresh drawers

The humidity is not adjustable.

The wire shelves inside the drawers permit that air

can circulate freely and consequently a better

conservation of foods.

The compartment has stops to prevent the draw-

ers from falling out when fully extended.

To remove the drawers (e.g. for cleaning purpo-

ses), pull them out as far as the stops, lift and re-

move.

You can remove all drawers to store large quanti-

ties of foods.

Daily use 9

Storage time in the longfresh 0°C compartment for fresh food

Type of food Air humidity adjustment Storage time

Onion

"dry”

up to 5 months

Butter

“dry”

up to 1 month

Large pork cuts

“dry”

up to 10 days

Beef, venison, small pork cuts,

poultry

“dry”

up to 7 days

Tomato sauce

“dry”

up to 4 days

Fish, shellfish, cooked meat

products

“dry”

up to 3 days

Cooked seafood

“dry”

up to 2 days

Salad, vegetables Carrots,

herbs, Brussels sprouts, celery

“humid”

up to 1 month

Artichokes, cauliflower, chico-

ry, iceberg lettuce, endive,

lamb’s lettuce, lettuce, leeks,

radicchio

“humid”

up to 21 days

Broccoli, Chinese leaves, kale,

cabbage, radishes, Savoy cab-

bage

“humid”

up to 14 days

Peas, kohlrabi

“humid”

up to 10 days

Spring onions, radishes, aspar-

agus, spinach

“humid”

up to 7 days

Fruit

Pears, dates (fresh), strawber-

ries, peaches

“humid”

up to 1 month

Plums

rhubarb, gooseberries

“humid”

up to 21 days

Apples (not sensitive to cold),

quinces

“humid”

up to 20 days

Apricots, cherries

“humid”

up to 14 days

Damsons, grapes

“humid”

up to 10 days

Blackberries, currants

“humid”

up to 8 days

Figs (fresh)

“humid”

up to 7 days

Blueberries, raspberries

“humid”

up to 5 days

1) The riper the fruit, the shorter the storage time

10 Daily use

Cakes containing cream and other kinds of pastry products can be stored in the longfresh

0°C compartment for 2 or 3 days.

Not to be placed in the longfresh 0°C compartment:

• cold sensitive fruit which have to be stored at cellar or room temperature like pineapple,

bananas, grapefruit, melons, mango, papaya, oranges, lemons, kiwi fruit.

• The types of food not mentioned above should be stored in the refrigerator compart-

ment (e.g. all sorts of cheese, cold cuts, etc.)

The level of air humidity in the drawers depends on the content of humidity in the stored

food, vegetable and fruit and on the frequency of door opening

The longfresh 0°C compartment is also suitable for slow thawing of food. In this case the

thawed food can be stored in the longfresh 0°C compartment for up to two days.

Tips:

• Pay attention to the freshness of the food, especially on the expiry date. Quality and

freshness influence the storage time.

• The whole storage cycle time will depend on the preservation conditions made prior to

the final storage in the fridge.

• Food, fruit or vegetables should always be packed or wrapped up before storage.

• Animal food always store packed and dry.

• Food rich in proteins will go bad quicker. This means seafood will spoil before fish which

in turn will spoil before meat. While storing food in a 0°C compartment storage time for

that kind of food can be increased by up to three times as well without loss on quality.

• All food stored in a 0°C compartment should be taken out of the drawers roughly 15-30

min before consumption, particularly fruit and vegetables to be consumed without any

additional cooking process. Allowing fruit and vegetables to return to room temperature

will improve the texture and flavour.

HELPFUL HINTS AND TIPS

Hints for energy saving

• Do not open the door frequently or leave it open longer than absolutely necessary.

• If the ambient temperature is high and the Temperature Regulator is set to low tempera-

ture and the appliance is fully loaded, the compressor may run continuously, causing

frost or ice on the evaporator. If this happens, set the Temperature Regulator toward

warmer settings to allow automatic defrosting and so a saving in electricity consump-

tion.

Hints for fresh food refrigeration

To obtain the best performance:

• do not store warm food or evaporating liquids in the refrigerator

• do cover or wrap the food, particularly if it has a strong flavour

Helpful hints and tips

• position food so that air can circulate freely around it

Hints for refrigeration

Useful hints:

Meat (all types) : wrap in polythene bags and place on the glass shelf above the vegetable

drawer.

For safety, store in this way only one or two days at the most.

Cooked foods, cold dishes, etc..: these should be covered and may be placed on any shelf.

Fruit and vegetables: these should be thoroughly cleaned and placed in the special draw-

er(s) provided.

Butter and cheese: these should be placed in special airtight containers or wrapped in alu-

minium foil or polythene bags to exclude as much air as possible.

Milk bottles: these should have a cap and should be stored in the bottle rack on the door.

Bananas, potatoes, onions and garlic, if not packed, must not be kept in the refrigerator.

CARE AND CLEANING

CAUTION!

Unplug the appliance before carrying out any maintenance operation.

This appliance contains hydrocarbons in its cooling unit; maintenance and recharging must

therefore only be carried out by authorized technicians.

Periodic cleaning

The equipment has to be cleaned regularly:

• clean the inside and accessories with lukewarm water and some neutral soap.

• regularly check the door seals and wipe clean to ensure they are clean and free from

debris.

• rinse and dry thoroughly.

Do not pull, move or damage any pipes and/or cables inside the cabinet.

Never use detergents, abrasive powders, highly perfumed cleaning products or wax polishes

to clean the interior as this will damage the surface and leave a strong odour.

Clean the condenser (black grill) and the compressor at the back of the appliance with a

brush or a vacuum cleaner. This operation will improve the performance of the appliance

and save electricity consumption.

The lowest shelf, dividing the cooler compartment from the LONGFRESH 0°C compartment

can be removed only for cleaning. To remove pull out the shelf straight.

The cover plates above the drawers in the compartment can be taken out for cleaning.

To make sure fully functionality of the LONGFRESH 0°C compartment the lowest shelf and

cover plates must be put back in their original position after cleaning.

Take care of not to damage the cooling system.

12 Care and cleaning

Many proprietary kitchen surface cleaners contain chemicals that can attack/damage the

plastics used in this appliance. For this reason it is recommended that the outer casing of

this appliance is only cleaned with warm water with a little washing-up liquid added.

After cleaning, reconnect the equipment to the mains supply.

Replacing the carbon filter

The carbon filter helps to reduce the odours inside the fridge limiting the risk of unwanted

aroma in sensitive food

To get the best performance the carbon filter should be changed once every year.

New active air filters can be purchased from your local dealer.

• The air filter is placed behind the flap and

can be reached by pulling the flap outward

(1)

• pull out of the slot the exhausted air filter.

• insert the new air filter in the slot (2)

• close the flap.

The air filter is a consumable accessory and as such is not covered by the guarantee.

During the operation, always keep the air ventilation flap closed.

The air filter should be handled carefully to prevent its surface from being scratched.

Defrosting of the refrigerator

Defrosting of the fridge compartment is automatic.

The water that forms flows into a recipient on the compressor and evaporates. This recipi-

ent cannot be removed.

Periods of non-operation

When the appliance is not in use for long periods, take the following precautions:

•

disconnect the appliance from electricity supply

• remove all food

•

defrost

and clean the appliance and all accessories

• leave the door/doors ajar to prevent unpleasant smells.

If the cabinet will be kept on, ask somebody to check it once in a while to prevent the food

inside from spoiling in case of a power failure.

5) If foreseen.

Care and cleaning 13

WHAT TO DO IF…

WARNING!

Before troubleshooting, disconnect the mains plug from the mains socket.

Only a qualified electrician or competent person must do the troubleshooting that is not in

this manual.

There are some sounds during normal use (compressor, refrigerant circulation).

Problem Possible cause Solution

The appliance is noisy

The appliance is not supported

properly

Check if the appliance stands sta-

ble (all the four feet should be on

the floor)

The appliance does not

operate. The lamp does

not operate.

The appliance is switched off. Switch on the appliance.

The mains plug is not connected

to the mains socket correctly.

Connect the mains plug to the

mains socket correctly.

The appliance has no power.

There is no voltage in the mains

socket.

Connect a different electrical ap-

pliance to the mains socket.

Contact a qualified electrician.

The lamp does not work.

The lamp is in stand-by. Close and open the door.

The lamp is defective. Refer to "Replacing the lamp".

The Pilot light flashes.

The appliance is not working

properly.

Contact a qualified electrician.

The compressor operates

continually.

The temperature is not set cor-

rectly.

Set a higher temperature.

The door is not closed correctly. Refer to "Closing the door".

The door has been opened too

frequently.

Do not keep the door open longer

than necessary.

The product temperature is too

high.

Let the product temperature de-

crease to room temperature be-

fore storage.

The room temperature is too

high.

Decrease the room temperature.

The compressor does not

start immediately after

pressing theTURBO

COOLMATIC button, or

after changing the tem-

perature.

The compressor starts after a

period of time.

This is correct.

14 What to do if…

Problem Possible cause Solution

Water flows on the rear

plate of the refrigerator.

During the automatic defrosting

process, frost defrosts on the

rear plate.

This is correct.

Water flows into the re-

frigerator.

The water outlet is clogged. Clean the water outlet.

Products prevent that water

flows into the water collector.

Make sure that products do not

touch the rear plate.

Temperature cannot be

set .

TURBO COOLMATIC function

switched on.

Switch off TURBO COOLMATIC

manually, or wait to set the tem-

perature until the function has

reset automatically. Refer to

"TURBO COOLMATIC function"..

The temperature in the

appliance is too low/high.

The temperature regulator is not

set correctly.

Set a higher/lower temperature.

The door is not closed correctly. Refer to "Closing the door".

The product temperature is too

high.

Let the product temperature de-

crease to room temperature be-

fore storage.

Many products are stored at the

same time.

Store less products at the same

time.

The temperature in the

refrigerator is too high.

There is no cold air circulation in

the appliance.

Make sure that there is cold air

circulation in the appliance.

Replacing the lamp

1. Switch off the appliance.

2. Press on the rear hook and at the same

time slide the cover in the direction of the

arrow.

3. Replace the lamp with one of the same

power and specifically designed for

household appliances. (the maximum

power is shown on the lamp cover).

4. Install the lamp cover by sliding it into its

original position.

5. Switch on the appliance.

6. Open the door. Make sure that the light

comes on.

Closing the door

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to "Installation".

3. If necessary, replace the defective door gaskets. Contact the Service Center.

What to do if… 15

TECHNICAL DATA

Dimension of the recess

Height 1780 mm

Width 560 mm

Depth 550 mm

The technical information are situated in the rating plate on the internal left side of the

appliance and in the energy label.

INSTALLATION

WARNING!

Read the "Safety Information" carefully for your safety and correct operation of the appli-

ance before installing the appliance.

Positioning

WARNING!

If you are discarding an old appliance that has a lock or catch on the door, you must ensure

that it is made unusable to prevent young children being trapped inside.

The appliance shall have the plug accessible after installation.

Install this appliance at a location where the ambient temperature corresponds to the cli-

mate class indicated on the rating plate of the appliance:

Climate class Ambient temperature

SN +10°C to + 32°C

N +16°C to + 32°C

ST +16°C to + 38°C

T +16°C to + 43°C

Electrical connection

Before plugging in, ensure that the voltage and frequency shown on the rating plate corre-

spond to your domestic power supply.

The appliance must be earthed. The power supply cable plug is provided with a contact for

this purpose. If the domestic power supply socket is not earthed, connect the appliance to a

separate earth in compliance with current regulations, consulting a qualified electrician.

The manufacturer declines all responsibility if the above safety precautions are not ob-

served.

This appliance complies with the E.E.C. Directives.

16 Technical data

Ventilation requirements

The airflow behind the appliance must be suffi-

cient.

Installation of the carbon air filter

The carbon air filter is an active carbon filter which absorbs bad odours and permits to

maintain the best flavour and aroma for all foodstuffs without risk of odour cross contami-

nation.

On delivery the carbon filter is in a plastic bag to

maintain it’s duration and characteristics. The fil-

ter should be placed behind the flap before the

appliance is turned on.

1. Open the flap cover (1)

2. Remove the filter from the plastic bag

3. Insert the filter in the slot found in the back

of the flap cover (2)

4. Close the flap cover

During operation, always keep the air ventilation

flap closed.

The filter should be handled carefully so frag-

ments do not loosen from the surface.

Door reversibility

The door of the appliance opens to the right. If you want to open the door to the left, fol-

low these steps before you install the appliance:

50 mm

min.

200 cm

min.

200 cm

Installation 17

1. Loosen and remove the upper pin.

2. Remove the door.

3. Remove the spacer.

4. With a key, loosen the lower pin.

On the opposite side:

1. Tighten the lower pin.

2. Install the spacer.

3. Install the door.

4. Tighten the upper pin.

Installing the appliance

CAUTION!

Make sure that the mains cable can move freely.

Do the following steps:

Apply the adhesive sealing strip to the

appliance as shown in figure.

18 Installation

Drill the appliance using a Ø 2.5 mm drill

(10 mm max. penetration).

Fix the square fitting to the appliance .

Install the appliance in the niche.

Push the appliance in the direction of

the arrow (1) until the upper gap cover

stops against the kitchen furniture.

Push the appliance in the direction of

the arrow (2) against the cupboard on

the opposite side of the hinge.

Adjust the appliance in the niche.

Make sure that the distance between

the appliance and the cupboard front-

edge is 44 mm.

The lower hinge cover (in the accessories

bag) makes sure that the distance be-

tween the appliance and the kitchen

furniture is correct.

Make sure that the clearance between

the appliance and the cupboard is 4

mm.

Open the door. Put the lower hinge cov-

er in position.

D740

Ø 2,5

13mm

44mm

4mm

Installation 19

Attach the appliance to the niche with 4

screws.

6. Remove the correct part from the hinge

cover (E). Make sure to remove the part

DX, in the case of right hinge, SX in op-

posite case.

7. Attach the covers (C, D) to the lugs and

the hinge holes.

Install the vent grille (B).

Attach the hinge covers (E) to the hinge.

20 Installation

La pagina sta caricando ...

Aeg-Electrolux SZ91804-4I Manuale utente

Marca: Aeg-Electrolux

Modello: SZ91804-4I

Tipo: Manuale utente

Scarica il pdf

rapporto

in altre lingue

English: Aeg-Electrolux SZ91804-4I User manual

Documenti correlati

Altri documenti

AEG S93000KZM0 Manuale utente