Sony KP-41PX1 Manuale del proprietario

R

Instruction Manual

KP-41PX1

GB

Bedienungsanleitung

DE

δηγίες ρήσης

FR

Mode d’emploi

GR

Manuale d’Istruzioni

IT

Gebruiksaanwijzing

NL

Kullanwm Kwlavuzu

TR

Projection TV

4-206-027-

11

(1)

01COVER.fm Page 1 Monday, June 4, 2001 4:22 PM

3

GB

Thank you for choosing this Sony projection TV.

Before operating the projection TV, please read this manual thoroughly and retain

it for future reference.

Reading and Understanding this Instruction Manual:

•

Use

Getting Started

if you wish to install the projection TV set and to get familiar

with the basic functions.

•

Use

Advanced Operati

if you wish to know more about the additional features

of the projection TV set.

•

Symbols used in the manual:

• I

nforms you of possible hazards.

• Important information.

• Information on a feature.

•

1,2...

Sequence of instructions.

• Shaded buttons on the remote control show the buttons you have to press

to follow the sequence of instructions.

• Informs you of the result of the instructions.

• The process continues on the next page to get final result.

MENU

K

Instruction Manual

Projection TV

01GB.fm Page 3 Monday, June 4, 2001 3:47 PM

4

Safety Information

Additional Safety Information

•After transporting the projection TV directly from a cold to a warm location, or if the room temperature has changed suddenly,

pictures may be blurred or show poor colour over portions of the picture. This is because moisture has condensed on the mirrors

or lenses inside the projection TV. Let the moisture evaporate before using the projection TV.

•To obtain a clear picture, do not expose the screen to direct illumination or direct sunlight. If possible, use spot lighting directed

down from the ceiling.

•Displaying a still picture for long periods of time, for instance, when operating a video game or personal computer and viewing a

programme in 16:9 mode, may damage the picture tube. To avoid this, keep the picture contrast level low.

•Avoid touching the screen, and take care not to scratch the surface with hard objects.

Do not open the cabinet and the rear

cover of the TV. Refer to qualiﬁed

service personnel only.

To prevent ﬁre or shock hazard,

do not expose the TV to rain or

moisture.

For your own safety, do not touch

any part of the TV, power lead or

aerial lead during lightning storms.

Do not cover the

ventilation openings of the TV For

ventilation, leave a space of at least

10cm all around the set.

Never place the TV in hot, humid or

excessively dusty places. Do not

install the TV where it may be

exposed to mechanical vibrations.

To prevent ﬁre, keep inﬂammable

objects or naked lights (eg candles)

away from the TV.

Clean the TV with a soft, lightly

dampened cloth. Do not use

benzine, thinner or any other

chemicals to clean the TV. Do not

scratch the TV screen. As a safety

precaution, unplug the TV before

cleaning it.

Pull out the power lead by the

plug. Do not pull on the power

lead itself.

Take care not to place heavy

objects on the power lead as this

could result in damage.

We recommend you wind any

excess lead around the holders

provided on the rear of the TV.

Place the TV on a secure stable

stand. Do not allow children to

climb on to it. Do not place the TV

on its side or face up.

Do not cover the ventilation

openings of the TV with items

such as curtains or newspapers

etc.

Never push objects of any kind into

the set as this could result in a ﬁre or

electric shock. Never spill liquid of

any kind on the set. If any liquid or

solid object does fall through, do not

operate the TV. Have it checked

immediately by qualiﬁed personnel.

For environmental and safety

reasons, it is recommended that the

TV set is not left in standby mode

when not in use. Disconnect from

the mains.

This set is to operate on a 220-240V

AC supply only. Take care not to

connect too many appliances to the

same power socket as this could

result in ﬁre or electric shock.

Unplug the power lead before

moving the TV. Avoid uneven

surfaces, quick steps or excessive

force. If the set has been dropped or

damaged, have it checked

immediately by qualiﬁed service

personnel.

Safety Information

01GB.fm Page 4 Monday, June 4, 2001 3:47 PM

5

GB

Table of Content

Table of Contents

Keys to read this Instruction Manual ............................................................................................3

For your Safety..................................................................................................................................4

Getting Started

Overview

Checking the Accessories Supplied...................................................................................6

Overview of TV Buttons......................................................................................................6

Overview of Remote Control Buttons...............................................................................7

Installation

Inserting Batteries into the Remote Control.....................................................................8

Connecting the Aerial and VCR.........................................................................................8

Switching on the projection TV..........................................................................................8

First Time Operation

S

electing Language...............................................................................................................9

Automatically Tuning the TV using the Remote Control ............................................10

Changing the Programme Order of the TV channel.....................................................11

Adjusting colour Registration (Convergence) ...............................................................12

On Screen display Menus Guide .....................................................................................13

Advanced Operation

Advanced Presetting

Automatically Tuning the TV ..........................................................................................14

Manually Tuning the TV...................................................................................................15

Using the “Further Programme Preset” function..........................................................16

Locking Programmes.........................................................................................................17

Skipping Programme positions........................................................................................18

Labelling a channel ............................................................................................................19

Advanced TV Operation

Adjusting the Picture.........................................................................................................20

Changing the screen mode ...............................................................................................21

Adjusting the Sound ..........................................................................................................22

Using the Sleep Timer........................................................................................................24

Teletext

Viewing Teletext.................................................................................................................25

Optional Connections

Connecting Optional Equipment.....................................................................................26

Using Optional Equipment...............................................................................................27

Smartlink .............................................................................................................................28

Remote Control of other Sony Equipment .....................................................................28

Selecting the output source for the Euro AV connectors .............................................29

Using the “AV Label Preset” function ............................................................................30

Additional Information

Optimum Viewing Area....................................................................................................31

Specifications ......................................................................................................................32

Troubleshooting .................................................................................................................33

01GB.fm Page 5 Monday, June 4, 2001 3:47 PM

6

One Remote Control

(RM-892)

Checking the Accessories Supplied

Getting Started - Push up

Two batteries (R6 type)

Push up the flap on the

front of the projection TV

to reveal the front panel.

Headphone

jack

S Video

Input

jack

Auto

Convergence

button

Auto

Start up

button

Audio

Input

jacks

Selecting

input

source

Volume

control

buttons

Programme

up or down

buttons

(selects TV

channels)

Standby

indicator

On/Off

Switch

Video

Input

jack

Getting Started - Overview

Checking the Accessories Supplied

Overview of Projection TV Buttons

S

RM

892

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

VIDEO TV

01GB.fm Page 6 Monday, June 4, 2001 3:47 PM

7

GB

S

RM

892

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

K

VIDEO TV

VTR 1 2 3 4 DVD

CH

This button does not work on this set.

Muting the Sound

Press to mute TV sound.

Press again to restore the sound.

VCR on/off

Press to switch your VCR on or off.

Selecting TV mode

Press to switch off Teletext or video input.

Selecting Teletext

Press to switch on Teletext.

These buttons do not work on this set.

Selecting channels

Press to select channels.

For double-digit programme numbers, e.g.

23, press -/-- first, then the buttons 2 and 3.

If you enter an incorrect first digit, this

should be corrected by entering another digit

(0-9) and then selecting -/-- button again to

enter the programme number of your choice.

Selecting Sound mode

Press repeatedly to change the sound mode.

Selecting Picture mode

Press repeatedly to change the picture mode.

Adjusting TV Volume

Press to adjust the volume of the TV.

Checking the Accessories Supplied

Getting Started - Overview

Overview of Remote Control Buttons

Displaying the time

Press to switch the time on or off

(available only when teletext is

broadcast).

VCR operation

For more details, please refer to the

section "Remote Control of other

Sony Equipment".

Besides TV functions, all coloured buttons as well as green

symbols are also used for Teletext operation. For more details,

please refer to the "Teletext" section of this instruction manual.

To Temporarily Switch Off projection

TV

Press to temporarily switch off TV (the

standby indicator

on the set lights up in

red). Press again to switch on TV from

standby mode.

To save energy we recommend switching off

completely when TV is not in use.

After 15-30 minutes without a signal

and without any button being pressed,

the set switches automatically into

standby mode.

Displaying On Screen Information

Press to display all on-screen indications.

Press again to cancel.

Selecting Input source

Press repeatedly until the desired input

symbol of the source appears on the screen.

Back to the channel last watched

Press to watch the last channel selected

(watched for at least 5 seconds).

Selecting Screen format

Press repeteadly to change the format of

the screen (for more details, please refer to

the section “Changing the Screen format”).

This button only works in Teletext mode.

Function

associated to this button does not

work with this set.

Joystick for menu selection

4

Scroll Up

$

Scroll Down

Z

Previous menu or selection

z

Next menu or selection

OK

Confirms your selection

Selecting channels

Press to select the next or previous channel.

Displaying the menu system

Press to display the menu on the screen.

Press again to remove the menu display

from the screen.

01GB.fm Page 7 Monday, June 4, 2001 3:47 PM

8

Getting Started - Installation

Make sure you insert the batteries using the correct polarities.

Always remember to dispose of used batteries in an environmental friendly way.

Inserting Batteries into the Remote Control

Getting Started - Installation

Connecting the Aerial and VCR

Switching on the projection TV

Connect the projection

TV plug to the

mains socket (220-

240V AC, 50Hz).

Push in the

On/Off

switch on the front of the

projection TV.

The Scart lead is optional.

If you use this optional connection it can improve picture and sound quality when using a VCR.

If you do not use a SCART lead, after automatically tuning the projection TV refer to the “Manually Tuning the TV” section

of this instruction manual, to the tune in the set to the ouput of you VCR. Also refer to your VCR instruction manual to

find out how to find the output channel of your VCR.

or

OUT IN

VCR

01GB.fm Page 8 Monday, June 4, 2001 3:47 PM

9

GB

Getting Started - First Time Operation

Use this function to change the language of the menu screens.

The first time that you switch on your projection TV, the Language menu appears automatically.

However, if you need to change the language menu afterwards, select the menu Language in the (PRESET) menu and

proceed in the same way as described below.

Selecting Language

1

Press the

on/off

button on your projection TV set to switch on your

TV. The first time you press the on/off button on your TV set, the

language menu displays automatically on the TV screen.

2

Push the joystick on the remote control

$

or

4

to select the language,

then press

OK

to confirm your selection.

If you select “French” language, the “Auto Tuning” process

will start searching TV channels on “L” TV system (for France)

and later B/G.

The Auto Tuning menu appears on the projection TV screen in the selected

language.

Getting Started - First Time Operation

S

RM

892

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

VIDEO TV

Do you want to start

automatic tuning?

Yes

No

Confirm: OK

LANGUAGE

English

Deutsch

Français

Português

Nederlands

Norsk

Česki

Magyar

Eλλnvιkά

Select Language:

Confirm: OK

Español

Suomi

Suenska

Dansk

Italiano

LANGUAGE

English

Deutsch

Français

Português

Nederlands

Norsk

Česki

Magyar

Eλλnvιkά

Select Language:

Confirm: OK

Español

Suomi

Suenska

Dansk

Italiano

LANGUAGE

English

Deutsch

Français

Português

Nederlands

Norsk

Česki

Magyar

Eλλnvιkά

Select Language:

Confirm: OK

Español

Suomi

Suenska

Dansk

Italiano

01GB.fm Page 9 Monday, June 4, 2001 3:47 PM

10

1

Press the

OK

button on the remote control to select

YES

. A new menu

appears automatically on the screen asking you to check that the

antenna is connected.

2

Confirm that the antenna is connected and then press the

OK

button.

The automatic tuning starts and the message "AUTO

PROGRAMME" flashes on the screen.

This procedure could take some minutes. Please, be patient and

do not press any button, otherwise the automatic tuning will

not be completed.

When the automatic tuning is finished, the Programme Sorting menu

appears on the screen.

Notes:

• To stop the automatic tuning, press the MENU button.

• If you stop the automatic tuning by pressing the MENU

button, the Programme Sorting menu does not appear

automatically on the screen.

Getting Started - First Time Operation

You need to tune the set to receive channels (TV Broadcast). By following the instructions below, this projection TV

automatically searches and stores all available channels for you.

After having selected the language, a new menu appears automatically on the projection TV screen asking you to

automatically tune the TV. However, if you need to change or repeat the tuning afterwards (e.g. when you move house), select

the menu Auto Programme in the (PRESET) menu and proceed in the same way as described below or, please refer to the

section "Automatically Tuning the TV" of this instruction manual.

Automatically Tuning the TV using the Remote Control

Getting Started - First Time Operation

Do you want to start

automatic tuning?

Yes

No

Confirm: OK

PRO

G

1

AUT

O

PROG SYS CHAN LABEL

PROGRAMME SORTING

B/G

0

1

2

3

4

5

6

7

8

9

BBC-W

MV-CH

TVE-1

TVE-2

ANT-3

TELE 5

C PLUS

- - - - -

CNN -

C 28

C 40

C 41

C 31

C 34

C 27

C 47

C 44

C 23

C 35

Select PROG: + OK

Exit: MENU

PROG

1

AUTO PROGRAMME

SYS

B/G

CH

C 26

LABEL

- - - - -

Please confirm that

antenna is connected

Confirm: OK

S

RM

892

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

VIDEO TV

01GB.fm Page 10 Monday, June 4, 2001 3:47 PM

11

GB

Getting Started - First Time Operation

After all available channels (TV Broadcast) are captioned and stored, a new menu appears automatically on the screen to

change the order in which the channels appear on the screen.

However, if you wish to rearrange the order of the channels afterwards, select the menu Programme Sorting in the

(PRESET) menu and proceed in the same way as described in the b) section of this chapter.

a) If you do not wish to change the channel order:

Changing the Programme Order of the TV channels

1

Press the MENU button on the remote control to exit and return to the

normal TV screen.

When the automatic tuning is finished, the Programme Sorting menu

appears on the screen.

b) If you wish to change the channel order:

1 Push the joystick on the remote control to $ or 4 to select the

programme number with the channel (TV Broadcast) you wish to

rearrange, then press OK.

2 Push the joystick to $ or 4 to select the new programme number

position for your selected channel (TV Broadcast), then press OK.

The selected channel now moves to its new programme position

and the other channels move accordingly.

3 Repeat steps 1 and 2 if you wish to change the order of the other

channels.

4 Press the MENU button to exit and return to the normal TV screen.

Your projection TV is now ready for use.

Getting Started - First Time Operation

PROG SYS CHAN LABEL

PROGRAMME SORTING

B/G

0

1

2

3

4

5

6

7

8

9

BBC-W

MV-CH

TVE-1

TVE-2

ANT-3

TELE 5

C PLUS

- - - - -

CNN -

C 28

C 40

C 41

C 31

C 34

C 27

C 47

C 44

C 23

C 35

Select PROG: + OK

Exit: MENU

PROG SYS CHAN LABEL

PROGRAMME SORTING

B/G

0

1

2

3

4

5

6

7

8

9

BBC-W

MV-CH

TVE-1

TVE-2

ANT-3

TELE 5

C PLUS

- - - - -

CNN -

C 28

C 40

C 41

C 31

C 34

C 27

C 47

C 44

C 23

C 35

Select PROG: + OK

Exit: MENU

B/G

0

1

2

3

4

5

6

7

8

9

MV-CH

TVE-1

TVE-2

ANT-3

TELE 5

C PLUS

- - - - -

CNN -

BBC-W

C 40

C 41

C 31

C 34

C 27

C 47

C 44

C 23

C 35

C 28

PROGRAMME SORTING

Select Position:

Confirm: OK

SYS CHAN LABELPROG

S

RM

892

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

VIDEO TV

01GB.fm Page 11 Monday, June 4, 2001 3:47 PM

12

Getting Started - First Time Operation

Due to the earth’s magnetism, the picture might become undefined and you could see different colours on the outlines of the

images. In that case, proceed as follows:

Adjusting Colour Registration (Convergence)

Auto converge the Red, Green, and Blue

Lines

1

Push up the flap on the front of the projection TV to reveal the front

control panel.

2 Press button on the projection TV.

The Auto Convergence function works for about 30 seconds. When the white

cross disappears from the screen, your projection TV is ready for use.

Notes:

The Auto Convergence function does not work:

• when no signal is input.

• when the input signal is weak.

• when the screen is exposed to spotlights or direct sunlight.

• when you watch the teletext broadcast.

If you wish a more accurate

convergence adjustment

1

Press the MENU button on the remote control to display the menu on

the screen.

2 Push the joystick to $ to select the symbol , then push to z to enter

to the PRESET menu.

3 Push the joystick to $ or 4 or 4 to select Convergence, then push to z.

4 Push the joystick to $ or 4 to select “the line” (vertical and horizontal

lines in red and blue) you want to adjust.

: red vertical line (left/right adjustment)

: red horizonta line (up/down adjustment)

: blue vertical line (left/right adjustment)

: blue horizontal line (up/down adjustment)

Then press the OK button.

5 Push the joystick repeatedly to $ , 4 , Z or z to converge the selected

line with the green line in the centre, then press OK to confirm.

6 Repeat steps 4 and 5 to adjust the other lines, until all the lines have

overlapped to form a white cross.

7 Press the MENU button to exit and return to the normal TV screen.

Your projection TV is ready for use.

PICTURE CONTROL

Personal

4:3

Picture Mode

Contrast

Reset

Format

Auto Programme

Manual Programme Preset

Further Programme Preset

AV Label Preset

Programme Sorting

Parental Lock

Language

Convergence

PRESET

S

RM

892

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

VIDEO TV

Getting Started - First Time Operation

01GB.fm Page 12 Monday, June 4, 2001 3:47 PM

13

GB

Getting Started - First Time Operation

Adjusting Colour Registration (Convergence)

PICTURE CONTROL

Personal

4:3

Picture Mode

Contrast

Reset

Format

SOUND CONTROL

Personal

Off

Mono

0

Mono

Main

Sound Mode

Balance

Reset

Dolby Virtual

Dual Sound

Volume Offset

Volume

Dual Sound

Speaker

VIDEO CONNECTION

[TV - - - - - - -]

[AV1 - - - - - - -]

TV Screen

Output

TV

AV1

TIMER

1:00

Sleep Timer

Auto Programme

Manual Programme Preset

Further Programme Preset

AV Label Preset

Programme Sorting

Parental Lock

Language

Convergence

PRESET

Auto Programme

Manual Programme Preset

Further Programme Preset

AV Label Preset

Programme Sorting

Parental Lock

Language

Convergence

PRESET

Do you want to start

automatic tuning?

Yes

No

Confirm: OK

Auto Programme

Manual Programme Preset

Further Programme Preset

AV Label Preset

Programme Sorting

Parental Lock

Language

Convergence

PRESET

B/G

0

1

2

3

4

5

6

7

8

9

PROG SYS CHAN

MV-CH

TVE-1

TVE-2

ANT-3

TELE 5

C PLUS

- - - - -

CNN -

BBC-W

LABEL

C 40

C 41

C 31

C 34

C 27

C 47

C 44

C 23

C 35

C 28

MANUAL PROGRAMME PRESET

Auto Programme

Manual Programme Preset

Further Programme Preset

AV Label Preset

Programme Sorting

Parental Lock

Language

Convergence

PRESET

Off

AV1

Off

AV2

Off

On

0

1

2

3

4

5

6

7

8

9

PROG AFT DECODER

FURTHER PROGRAMME PRESET

Auto Programme

Manual Programme Preset

Further Programme Preset

AV Label Preset

Programme Sorting

Parental Lock

Language

Convergence

PRESET

PROG SYS CHAN LABEL

PROGRAMME SORTING

B/G

0

1

2

3

4

5

6

7

8

9

BBC-W

MV-CH

TVE-1

TVE-2

ANT-3

TELE 5

C PLUS

- - - - -

CNN -

C 28

C 40

C 41

C 31

C 34

C 27

C 47

C 44

C 23

C 35

Auto Programme

Manual Programme Preset

Further Programme Preset

AV Label Preset

Programme Sorting

Parental Lock

Language

Convergence

PRESET

AV LABEL PRESET

AV1

RGB

AV2

YC2

AV3

INPUT LABEL

- - - - -

Auto Programme

Manual Programme Preset

Further Programme Preset

AV Label Preset

Programme Sorting

Parental Lock

Language

Convergence

PRESET

B/G

0

1

2

3

4

5

6

7

8

9

PROG

MV-CH

TVE-1

TVE-2

ANT-3

TELE 5

C PLUS

- - - - -

CNN -

- - - - -

C 40

C 41

C 31

C 34

C 27

C 47

C 44

C 23

C 35

C 28

SYS CHAN LABEL

PARENTAL LOCK

Auto Programme

Manual Programme Preset

Further Programme Preset

AV Label Preset

Programme Sorting

Parental Lock

Language

Convergence

PRESET

LANGUAGE

English

Deutsch

Français

Italiano

Nederlands

Polski

Česki

Magyar

Eλλnvιkά

Auto Programme

Manual Programme Preset

Further Programme Preset

AV Label Preset

Programme Sorting

Parental Lock

Language

Convergence

PRESET

(For different adjustments, please refer to

the section "Adjusting the Picture")

(For different adjustments, please refer to

the section "Adjusting the Sound")

(For more details, please refer to the

section "Selecting the output source for the

Euro AV connectors")

(For more details, please refer to the

section "Using the Sleep Timer")

(For more details, please refer to the

section "Automatically Tuning the TV

using the Remote Control")

(For more details, please refer to the

section "Manually Tuning the TV")

(For more details, please refer to the

section "Using the Further Programme

Preset function")

(For more details, please refer to the

section "Using the AV Label Preset

function")

(For more details, please refer to the

section "Changing the Programme

Order of the TV channels")

(For more details, please refer to the

section "Locking Programmes")

(For more details, please refer to the

section "Selecting Language")

(For more details, please refer to the

section "Adjusting Colour Registration

Convergence)"

Press the MENU button on the remote control to display the menu on the screen.

MENU

Getting Started - First Time Operation

PICTURE CONTROL

Personal

4:3

Picture Mode

Contrast

Reset

Format

SOUND CONTROL

Personal

Off

Mono

0

Mono

Main

Sound Mode

Balance

Reset

Dolby Virtual

Dual Sound

Volume Offset

Volume

Dual Sound

Speaker

VIDEO CONNECTION

[TV - - - - - - -]

[AV1 - - - - - - -]

TV Screen

Output

TV

AV1

TIMER

Off

Sleep Timer

01GB.fm Page 13 Monday, June 4, 2001 3:47 PM

14

Advanced Operation - Advanced Presetting

Besides the explanation in the section “Automatically Tuning the TV using the Remote Control“, by following the

instructions below, this projection TV also searches and stores automatically all available channels using just one button of

the projection TV set and one button of the remote control.

Automatically Tuning the TV

1 Push up the flap on the front of the projection TV to reveal the front

control panel.

2 Press and hold in the button on the TV set for some seconds, until

a menu appears automatically on the screen asking you to check that

antenna is connected.

3 Confirm that the antenna is connected and then press the OK button

on the remote control.

The automatic tuning starts and the message "AUTO

PROGRAMME" flashes on the screen.

This procedure could take some minutes. Please, be patient and

do not press any button, otherwise the automatic tuning will not

be completed.

When the automatic tuning procedure is complete, the Programme

Sorting menu appears on the screen:

• If you do not wish to change the channel order, press the MENU

button on the remote control to exit and return to the normal TV

screen.

• If you wish to change the channel order, proceed in the same way as

described in the chapter "Changing the Programme Order of the TV

channels", section b).

Note: To stop the automatic tuning, press the MENU button on the

remote control.

Advanced Operation - Advanced Presetting

S

RM

892

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

VIDEO TV

Please confirm that

antenna is connected

Confirm: OK

Please confirm that

antenna is connected

Confirm: OK

PROG

1

AUTO PROGRAMME

SYS

B/G

CH

C 26

LABEL

- - - - -

01GB.fm Page 14 Monday, June 4, 2001 3:47 PM

15

GB

1 Press the MENU button on the remote control to display the

menu on the screen.

2 Push the joystick to $ to select the symbol, then push to z to

enter to the PRESET menu.

3

Push the joystick to $ or 4 to select Manual Programme Preset,

then push to z .

4

Push the joystick to $ or 4 to select on which programme number

you want to preset a channel, then push to z.

5

Push the joystick to $ or 4 to select the TV Broadcast system (B/G

for western european countries, D/K for eastern european

countries, L for France or I for United Kingdom) or a video input

source (AV1, AV2...), then push to z.

6 Push the joystick to $ or 4 to select the channel tuning, "C" for

terrestrial channels or "S" for cable channels, then push to z.

7

Press the number buttons to enter the channel number of the TV

Broadcast or push the joystick to 4 or $ to search for the next

available channel.

If you do not wish to store this channel, push the joystick to 4 or $

to continue searching for the desired channel.

8 If this is the desired channel you wish to store, press the OK button.

9 Repeat steps 4 to 8 if you wish to store more channels.

10 Press the MENU button to exit and return to the normal TV screen.

Your projection TV is now ready for use.

Advanced Operation - Advanced Presetting

Use this function to preset channels or a video input source one by one to the programme order of your choice.

Manually Tuning the TV

Advanced Operation - Advanced Presetting

PICTURE CONTROL

Personal

4:3

Picture Mode

Contrast

Reset

Format

Auto Programme

Manual Programme Preset

Further Programme Preset

AV Label Preset

Programme Sorting

Parental Lock

Language

Convergence

PRESET

Auto Programme

Manual Programme Preset

Further Programme Preset

AV Label Preset

Programme Sorting

Parental Lock

Language

Convergence

PRESET

B/G

0

1

2

3

4

5

6

7

8

9

PROG SYS CHAN

MV-CH

TVE-1

TVE-2

ANT-3

TELE 5

C PLUS

- - - - -

CNN -

BBC-W

LABEL

C 40

C 41

C 31

C 34

C 27

C 47

C 44

C 23

C 35

C 28

MANUAL PROGRAMME PRESET

B/G

0

1

2

3

4

5

6

7

8

9

PROG SYS CHAN

MV-CH

TVE-1

TVE-2

ANT-3

TELE 5

C PLUS

- - - - -

CNN -

BBC-W

LABEL

C 40

C 41

C 31

C 34

C 27

C 47

C 44

C 23

C 35

C 28

MANUAL PROGRAMME PRESET

B/G

0

1

2

3

4

5

6

7

8

9

PROG SYS CHAN

MV-CH

TVE-1

TVE-2

ANT-3

TELE 5

C PLUS

- - - - -

CNN -

BBC-W

LABEL

C 40

C 41

C 31

C 34

C 27

C 47

C 44

C 23

C 35

C 28

MANUAL PROGRAMME PRESET

B/G

0

1

2

3

4

5

6

7

8

9

PROG SYS CHAN

MV-CH

TVE-1

TVE-2

ANT-3

TELE 5

C PLUS

- - - - -

CNN -

BBC-W

LABEL

C 40

C 41

C 31

C 34

C 27

C 47

C 44

C 23

C 35

C 28

MANUAL PROGRAMME PRESET

S

RM

892

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

VIDEO TV

01GB.fm Page 15 Monday, June 4, 2001 3:47 PM

16

1 Press the MENU button on the remote control to display the menu on

the screen.

2 Push the joystick to $ to select the symbol, then push to z to enter

to the PRESET menu.

3 Push the joystick to $ or 4 to select Further Programme Preset, then

push to z .

4 Push the joystick to $ or 4 to select the relevant programme number,

then push to z repeatedly to select:

a) AFT or

b) DECODER.

The selected item changes colour.

5 a) AFT

Push the joystick to $ or 4 to fine tune the channel frequency over a

range of -15 to +15, then press the OK button.

Repeat steps 4 and 5a) if you wish to fine tune other channels.

b) DECODER

Push the joystick to $ or 4 to select AV3 and press the OK.

The picture from the decoder connected to the Euro AV :3 on

the back of the projection TV will appear on this programme

number.

Repeat steps 4 and 5b) to preset the AV3 output for other

programme positions.

6 Press the MENU button to exit and return to the normal TV screen.

Your projection TV is now ready for use.

Advanced Operation - Advanced Presetting

With this feature you can:

a) Even normally the automatic fine tuning (AFT) is operating, however you can manually fine-tune the TV to obtain a

better picture reception if the picture is distorted or

b) preset the AV3 output for the programme positions of channels with scrambled signals (eg from a pay TV decoder). In

this way a connected VCR records the unscrambled signal.

Using the "Further Programme Preset" function

Advanced Operation - Advanced Presetting

PICTURE CONTROL

Personal

4:3

Picture Mode

Contrast

Reset

Format

Auto Programme

Manual Programme Preset

Further Programme Preset

AV Label Preset

Programme Sorting

Parental Lock

Language

Convergence

PRESET

S

RM

892

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

VIDEO TV

Auto Programme

Manual Programme Preset

Further Programme Preset

AV Label Preset

Programme Sorting

Parental Lock

Language

Convergence

PRESET

Off

AV1

Off

AV2

Off

On

0

1

2

3

4

5

6

7

8

9

PROG AFT DECODER

FURTHER PROGRAMME PRESET

Off

2

On

0

1

2

3

4

5

6

7

8

9

PROG AFT DECODER

FURTHER PROGRAMME PRESET

AV3

Off

On

0

1

2

3

4

5

6

7

8

9

PROG AFT DECODER

FURTHER PROGRAMME PRESET

01GB.fm Page 16 Monday, June 4, 2001 3:47 PM

17

GB

1 Press the MENU button on the remote control to display the menu on

the screen.

2 Push the joystick to $ to select the symbol, then push to z to enter

to the PRESET menu.

3 Push the joystick to $ or 4 to select Parental Lock, then push to z .

4 Push the joystick to $ or 4 to select the programme number with the

channel you wish to block, then press the OK button.

The symbol appears before the programme position to indicate

this programme is now blocked.

To unblock the programme, press the OK button again. The

symbol disappears.

5 Repeat step 4 if you wish to block other channels.

6 Press the MENU button to exit and return to the normal TV screen.

When you select a blocked programme the screen appears in black, with

symbol.

Advanced Operation - Advanced Presetting

This feature enables you to prevent undesirable broadcasts appearing on the screen. We suggest you use this function to

prevent children from watching programmes you consider unsuitable.

Locking Programmes

Advanced Operation - Advanced Presetting

PICTURE CONTROL

Personal

4:3

Picture Mode

Contrast

Reset

Format

Auto Programme

Manual Programme Preset

Further Programme Preset

AV Label Preset

Programme Sorting

Parental Lock

Language

Convergence

PRESET

Auto Programme

Manual Programme Preset

Further Programme Preset

AV Label Preset

Programme Sorting

Parental Lock

Language

Convergence

PRESET

B/G

0

1

2

3

4

5

6

7

8

9

PROG

MV-CH

TVE-1

TVE-2

ANT-3

TELE 5

C PLUS

- - - - -

CNN -

- - - - -

C 40

C 41

C 31

C 34

C 27

C 47

C 44

C 23

C 35

C 28

SYS CHAN LABEL

PARENTAL LOCK

S

RM

892

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

VIDEO TV

01GB.fm Page 17 Monday, June 4, 2001 3:47 PM

18

1 Press the MENU button on the remote control to display the menu on

the screen.

2 Push the joystick to $ to select the symbol, then push to z to enter

to the PRESET menu.

3 Push the joystick to $ or 4 to select Manual Programme Preset, then

push to z .

4 Push the joystick to $ or 4 to select the programme position you want

to skip, then push to z to enter to the SYS column.

5 Push the joystick to $ to select “- - -”, then press the OK button to

store.

6 Repeat steps 4 and 5 to skip other unused programme positions.

7 Press the MENU button to exit and return to the normal TV screen.

When changing channels (TV Broadcasts) with the PROGR +/- buttons,

the skipped programme positions do not appear. You can, however, still select

them using the number buttons.

Advanced Operation - Advanced Presetting

You can programme this projection TV to skip any unwanted programme numbers when they are selected with the PROGR

+/- buttons. To cancel this function afterwards, proceed in the same way as described below by selecting the appropriate

TV system (B/G, D/K, L or I) instead of "- - -" in step 5.

Skipping Programme positions

Advanced Operation - Advanced Presetting

PICTURE CONTROL

Personal

4:3

Picture Mode

Contrast

Reset

Format

Auto Programme

Manual Programme Preset

Further Programme Preset

AV Label Preset

Programme Sorting

Parental Lock

Language

Convergence

PRESET

S

RM

892

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

VIDEO TV

Auto Programme

Manual Programme Preset

Further Programme Preset

AV Label Preset

Programme Sorting

Parental Lock

Language

Convergence

PRESET

B/G

0

1

2

3

4

5

6

7

8

9

PROG SYS CHAN

MV-CH

TVE-1

TVE-2

ANT-3

TELE 5

C PLUS

- - - - -

CNN -

BBC-W

LABEL

C 40

C 41

C 31

C 34

C 27

C 47

C 44

C 23

C 35

C 28

MANUAL PROGRAMME PRESET

B/G

- - -

0

1

2

3

4

5

6

7

8

9

PROG SYS CHAN

MV-CH

TVE-1

TVE-2

ANT-3

TELE 5

C PLUS

- - - - -

CNN -

BBC-W

LABEL

C 40

C 41

C 31

C 34

C 27

C 47

C 44

C 23

C 35

C 28

MANUAL PROGRAMME PRESET

01GB.fm Page 18 Monday, June 4, 2001 3:47 PM

19

GB

1 Press the MENU button on the remote control to display the menu on

the screen.

2 Push the joystick to $ to select the symbol, then push to z to enter

to the PRESET menu.

3 Push the joystick to $ or 4 to select Manual Programme Preset, then

push to z.

4 Push the joystick to $ or 4 to select the programme number with the

channel you wish to name.

5 Push the joystick to z repeatedly until the first element of the LABEL

column is highlighted.

6 Push the joystick to $ or 4 to select a letter or number (select “-” for

a blank), then push to z to confirm this character. Select the other four

characters in the same way.

7 After selecting all the characters, press the OK button.

8

Repeat steps 4 to 7 if you wish to label other channels.

9 Press the MENU button to exit and return to the normal TV screen.

When you select a named channel, the name appears for a few seconds on the

screen.

Advanced Operation - Advanced Presetting

Names for channels (TV Broadcasts) are usually taken automatically from Teletext if available. You can however name a

channel or an input video source using up to five characters (letters or numbers). Using this function, you can easily

identify which channel (TV Broadcasts) or video source you are watching.

Labelling a channel

Advanced Operation - Advanced Presetting

PICTURE CONTROL

Personal

4:3

Picture Mode

Contrast

Reset

Format

Auto Programme

Manual Programme Preset

Further Programme Preset

AV Label Preset

Programme Sorting

Parental Lock

Language

Convergence

PRESET

S

RM

892

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

VIDEO TV

Auto Programme

Manual Programme Preset

Further Programme Preset

AV Label Preset

Programme Sorting

Parental Lock

Language

Convergence

PRESET

PROG SYS CHAN LABEL

MANUAL PROGRAMME PRESET

B/G

0

1

2

3

4

5

6

7

8

9

- - - - -

C 40

C 41

C 31

C 34

C 27

C 47

C 44

C 23

C 35

C 28

PROG SYS CHAN LABEL

MANUAL PROGRAMME PRESET

B/G

0

1

2

3

4

5

6

7

8

9

- - - - -

A- - - -

- - - - -

C 40

C 41

C 31

C 34

C 27

C 47

C 44

C 23

C 35

C 28

PROG SYS CHAN LABEL

MANUAL PROGRAMME PRESET

B/G

0

1

2

3

4

5

6

7

8

9

- - - - -

C 40

C 41

C 31

C 34

C 27

C 47

C 44

C 23

C 35

C 28

01GB.fm Page 19 Monday, June 4, 2001 3:47 PM

20

1 Press the MENU button on the remote control to display the menu

on the screen.

2 Push the joystick z to enter the PICTURE CONTROL menu.

3 Push the joystick to $ or 4 to select the item you wish to change,

then push to z.

Refer to the table below to chose the item and for the effect of

each control:

Picture Mode z Picture Mode z Personal (for individual settings)

z Movie (for films)

z Live (for live broadcast programmes)

$ Brightness* Z Darker z Brighter

$ Colour* Z Less z More

$ Sharpness* Z Softer z Sharper

$ Hue** Z Greenish z Reddish

Contrast Z Less z More

Reset Resets picture to the factory preset levels.

Format (for detalis refer to the section "Changing the Screen

Mode")

* Can only be altered if Personal Picture Mode is selected.

** Only avalaible for NTSC colour signal (e.g: USA video tapes).

4 Push the joystick to Z or z to alter the selected item, then

press the OK button to store the new adjustment.

5 Repeat steps 3 and 4 to alter the other items.

6 Press the MENU button to exit and return to the normal TV screen.

Changing the Picture Mode Quickly

You can quickly change the Picture Mode without entering the

Picture Control menu screen.

1 Press the button on the remote control to directly access the

Picture Mode.

2 Push the joystick to $ or 4 to select your desired picture mode

(Personal, Movie or Live), then press the OK button to remove the

display from the screen.

K

Advanced Operation - Advanced TV Operation

Although the picture is adjusted at the factory, you can modify it to suit your own taste.

Adjusting the Picture

Advanced Operation - Advanced TV Operation

S

RM

892

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

VIDEO TV

PICTURE CONTROL

Personal

4:3

Picture Mode

Contrast

Reset

Format

PICTURE CONTROL

Personal

4:3

Picture Mode

Contrast

Reset

Format

PICTURE MODE

Personal

Picture Mode

Brightness

Colour

Sharpness

Hue

Personal

Movie

Live

01GB.fm Page 20 Monday, June 4, 2001 3:47 PM

21

GB

1 Press the MENU button on the remote control to display the menu

on the screen.

2 Push the joystick to z button to enter the PICTURE CONTROL

menu.

3 Push the joystick to $ to select Format.

4 Push the joystick to z repeatedly to select:

• 4:3: conventional 4:3 picture.

• 16:9: for 16:9 broadcasts.

Press rhe OK button.

5 Press the MENU button to exit and return to the normal TV screen.

Changing the Picture Mode Quickly

You can quickly change the Picture Mode without entering the

Picture Control menu screen.

1 Press the button on the remote control repeatedly to select your

desired format screen mode (4:3 or 16:9).

Advanced Operation - Advanced TV Operation

Using this Screen Mode feature you can change the aspect ratio of the screen.

Changing the screen mode

Advanced Operation - Advanced TV Operation

S

RM

892

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

VIDEO TV

PICTURE CONTROL

Personal

4:3

Picture Mode

Contrast

Reset

Format

PICTURE CONTROL

Personal

4:3

Picture Mode

Contrast

Reset

Format

16:9

4:3

01GB.fm Page 21 Monday, June 4, 2001 3:47 PM

La pagina sta caricando ...

Sony KP-41PX1 Manuale del proprietario

Sony KP-41PX1 Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti