LG MS07AWR Manuale del proprietario

OWNER’S MANUAL

AIR CONDITIONER

Please read this manual carefully before operating

your set and retain it for future reference.

www.lg.com

TYPE : WALL MOUNTED

P/NO : MFL67482001

ENGLISH ITALIANO ESPAÑOL FRANCAIS DEUTSCH

ΕΛΛΗΝΙΚΆ

PORTUGUESE

NEDERLANDS

POLSKI

MAGYAR

2

TIPS FOR SAVING ENERGY

ENGLISH

TIPS FOR SAVING ENERGY

Here are some tips that will help you minimize the power consumption when you use the air

conditioner. You can use your air conditioner more efficiently by referring to the instructions

below:

• Do not cool excessively indoors. This may be harmful for your health and may consume more

electricity.

• Block sunlight with blinds or curtains while you are operating the air conditioner.

• Keep doors or windows closed tightly while you are operating the air conditioner.

• Adjust the direction of the air flow vertically or horizontally to circulate indoor air.

• Speed up the fan to cool or warm indoor air quickly, in a short period of time.

• Open windows regularly for ventilation as the indoor air quality may deteriorate if the air con-

ditioner is used for many hours.

• Clean the air filter once every 2 weeks. Dust and impurities collected in the air filter may block

the air flow or weaken the cooling / dehumidifying functions.

For your records

Staple your receipt to this page in case you need it to prove the date of purchase or for warranty

purposes. Write the model number and the serial number here:

Model number :

Serial number :

You can find them on a label on the side of each unit.

Dealer’s name :

Date of purchase :

SAFETY PRECAUTIONS

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

Always comply with the following precautions to avoid dangerous situations and ensure peak

performance of your product

WARNING

It can result in serious injury or death when the directions are ignored

CAUTION

It can result in minor injury or product damage when the directions are ignored

WARNING

• Installation or repairs made by unqualified persons can result in hazards to you and others.

• Installation work must be performed in accordance with the National Electric Code by quali-

fied and authorized personnel only.

• The information contained in the manual is intended for use by a qualified service technician

familiar with safety procedures and equipped with the proper tools and test instruments.

• Failure to carefully read and follow all instructions in this manual can result in equipment mal-

function, property damage, personal injury and/or death.

Installation

• Do not use a defective or underrated circuit breaker. Use the correctly rated breaker and fuse.

There is risk of fire or electric shock.

• For electrical work, contact the dealer, seller, a qualified electrician, or an Authorized Service

Center. Do not disassemble or repair the product by yourself. There is risk of fire or electric

shock.

• Always ground the product as per the wiring diagram. Do not connect the ground wire to gas

or water pipes lightening rod or telephone ground wire. There is risk of fire or electric shock.

• Install the panel and the cover of control box securely. There is risk of fire or electric shock

due to dust , water etc.

• Use the correctly rated breaker or fuse. There is risk of fire or electric shock.

• Do not modify or extend the power cable. If the power cable or cord has scrathes or skin

peeled off or deteriorated then it must be replaced. There is risk of fire or electric shock.

• For installation, removal or reinstall , always contact the dealer or an Authorized Service Cen-

ter. There is risk of fire, electric shock, explosion, or injury.

• Do not install the product on a defective installation stand. Be sure that the installation area

does not deteriorate with age. It may cause product to fall.

• Never install the outdoor unit on a moving base or a place from where it can fall down.

The falling outdoor unit can cause damage or injury or even death of a person.

• In outdoor unit the step-up capacitor supplies high voltage electricity to the electrical compo-

nents. Be sure to discharge the capacitor completely before conducting the repair work.

An charged capacitor can cause electrical shock.

• When installing the unit, use the installation kit provided with the product. Otherwise the unit

may fall and cause severe injury.

• Indoor/outdoor wiring connections must be secured tightly and the cable should be routed

properly so that there is no force pulling the cable from the connection terminals. Improper or

loose connections can cause heat generation or fire.

!

3

ENGLISH

4

SAFETY PRECAUTIONS

ENGLISH

• Safely dispose off the packing materials. Like screws, nails, batteries, broken things etc after

installation or svc and then tear away and throw away the plastic packaging bags. Children

may play with them and cause injury.

• Be sure to check the refrigerant to be used. Please read the label on the product. Incorrect re-

frigerant used can prevent the normal operation of the unit.

Operation

• When the product is soaked (flooded or submerged) in water , contact an Authorized Service Center

for repair before using it again. There is risk of fire or eletric shock.

• Be sure to use only those parts which are listed in the svc parts list. Never attempt to modify the

equipment. The use of inappropriate parts can cause an electrical shock, excessive heat generation

or fire.

• Do not touch , operate, or repair the product with wet hands. Hold the plug by hand when taking

out. There is risk of electric shock or fire.

• Do not place a heater or other heating appliances near the power cable. There is risk of fire and elec-

tric shock.

• Do not allow water to run into electric parts. Install the unit away from water sources. There is risk

of fire, failure of the product, or electric shock.

• Do not store or use or even allow flammable gas or combustibles near the product. There is risk of

fire.

• Do not use the product in a tightly closed space for a long time. Perform ventilation regularly. Oxy-

gen deficiency could occur and hence harm your health.

• Do not open the front grille of the product during operation. (Do not touch the electrostatic filter, if

the unit is so equipped.) There is risk of physical injury, electric shock, or product failure.

• If strange sound, smell or smoke comes from product.Immediately turn the breaker off or discon-

nect the power supply cable. There is risk of electric shock or fire.

• Ventilate the product room from time to time when operating it together with a stove, or heating el-

ement etc. Oxygen deficiency can occur and hence harm your health.

• When the product is not to be used for a long time, disconnect the power supply plug or turn off

the breaker. There is risk of product damage or failure, or unintended operation.

• Take care to ensure that nobody especially kids could step on or fall onto the outdoor unit. This

could result in personal injury and product damage.

• Take care to ensure that power cable could not be pulled out or damaged during operation. There is

risk of fire or electric shock.

• Do not place ANYTHING on the power cable. There is risk of fire or electric shock.

• When flammable gas leaks, turn off the gas and open a window for ventilation befor turning on the

product. Do not use the telephone or turn switches on or off. There is risk of explosion or fire.

• Make sure to ventilate sufficiently when this air conditioner and a heating appliance such as a heater

are used simultaneously. Failure to do so may result in fire, serious injury, or product failure.

CAUTION

Installation

• Two or more people must lift and transport the product. Avoid personal injury.

• Do not install the product where it will be exposed to sea wind (salt spray) directly. It may cause cor-

rosion on the product.

• Install the drain hose to ensure that the condensed water is drained away properly. A bad connec-

tion may cause water leakage.

• Keep level even when installing the product. To avoid vibration or noise.

!

SAFETY PRECAUTIONS

• Do not install the product where the noise or hot air from the outdoor unit could damage or disturb

the neighborhoods. It may cause a problem for your neighbors and hence dispute.

• Always check for gas (refrigerant) leakage after installation or repair of product. Low refrigerant lev-

els may cause failure of product.

Operation

• Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a con-

sumer air conditioner, not a precision refrigeration system. There is risk of damage or loss of prop-

erty.

• Do not block the inlet or outlet of air flow. It may cause product failure.

• Use a soft cloth to clean. Do not use harsh detergents, solvents or splashing water etc. There is risk

of fire, electric shock, or damage to the plastic parts of the product.

• Do not touch the metal parts of the product when removing the air filter. There is risk of personal in-

jury.

• Do not step on or put anyting on the product. (outdoor units) There is risk of personal injury and fail-

ure of product.

• Always insert the filter securely after cleaning. Clean the filter every two weeks or more often if

necessary. A dirty filter reduces the efficiency.

• Do not insert hands or other objects through the air inlet or outlet while the product is operating.

There are sharp and moving parts that could cause personal injury.

• Be cautious when unpacking and installing the product. Sharp edges could cause injury.

• If the refrigerant gas leaks during the repair, do not touch the leakaing refrigerant gas. The refriger-

nat gas can cause frostbite (cold burn).

• Do not tilt the unit when removing or uninstalling it. The condensed water inside can spill.

• Do not mix air or gas other than the specified refrigerant used in the system. If air enters the refrig-

erant system, an excessively high pressure results, causing equipment damage or injury.

• If the refrigerant gas leaks during the installation, ventilate the area immediately. Otherwise it can be

harmfull for your health.

• Dismantling the unit, treatment of the refrigerant oil and eventual parts should be done in accor-

dance with local and national standards.

• Replace the all batteries in the remote control with new ones of the same type. Do not mix old and

new batteries or different types of batteries. There is risk of fire or product failure.

• Do not recharge or disassemble the batteries. Do not dispose off batteries in a fire. They may burn

or explode.

• If the liquid from the batteries gets onto your skin or clothes, wash it well with clean water. Do not

use the remote if the batteries have leaked. The chemicals in batteries could cause burns or other

health hazards.

• If you swallow the battery fluid from a leak, wash out the inside of your mouth thoroughly and then

consult a doctor. Failure to do so may result in serious health complications.

• Do not let the air conditioner run for a long time when the humidity is very high and a door or a win-

dow is left open. Moisture may condense and wet or damage furniture.

• Do not expose your skin or kids or plants to the cool or hot air draft. This could harm to your health.

• Do not drink the water drained from the product. It is not sanitary and could cause serious health is-

sues.

• Use a firm stool or ladder when cleaning, maintaining or repairing the product at an height. Be care-

ful and avoid personal injury.

5

ENGLISH

TABLE OF CONTENTS

2

TIPS FOR SAVING ENERGY

3 IMPORTANT SAFETY

INSTRUCTIONS

7 BEFORE USE

7 Components

8 Using the remote control

10 - Inserting batteries

10 - Installing the remote control holder

11 BASIC FUNCTIONS

11 Cooling your room

11 Heating your room

11 Removing humidity

12 Airing your room

12 Adjusting the fan speed

12 Adjusting the air ﬂow direction

12 Setting the timer

12 - Setting the current time

13 - Turning on the air conditioner

automatically at a set time

13 - Turning off the air conditioner

automatically at a set time

13 - Canceling the timer setting

13 - Setting sleep mode

14 ADVANCED FUNCTIONS

14 Changing room temperature quickly

14 Indoor air puriﬁcation

14 - Auto Clean operation

15 Plasma Puriﬁcation operation

15 Auto operation

16 Energy saving cooling mode

16 Display screen brightness

16 Operating the air conditioner without the

remote control

17 Restarting the air conditioner

automatically

18 MAINTENANCE

19 Cleaning the air ﬁlter

19 Cleaning the anti-allergy ﬁlter and triple

ﬁlter

19 Cleaning the plasma ﬁlter

20 TROUBLESHOOTING

20 Self-diagnosis function

20 Before requesting service

TABLE OF CONTENTS

6

ENGLISH

BEFORE USE

Components

Anti-allergy ﬁlter

Operation lamp

Signal Receiver

ON/OFF button

Air intake

Plasma ﬁlter

(option)

Air ﬁlter

Front grille

Vertical louver

Air outlet

Horizontal vane

Triple ﬁlter

Front grille

Air ﬁlter

Air inlet

On/ Off button

Signal receiver

Operation lamp

Air outlet

Air deﬂector

(Vertical louver & Horizontal vane)

NOTE

!

The number of operation lamps and their locations may vary, depending on the model of the

air conditioner.

7

BEFORE USE

ENGLISH

Indoor unit

* The feature can be changed according a type of model.

Using the remote control

You can operate the air conditioner more conveniently with the remote control. You will find the

buttons for the additional functions under the cover of the remote control.

Wireless remote control

Display

screen

Control

panel

* Some functions may not be supported, depending on the

model.

BEFORE USE

8

ENGLISH

Control

panel

Display

screen

Description

a

F

Plasma button*:Plasmaster filter purifies

the air by removing mites, micro dust and

pet fur. Plasmaster Ionizer sterilize the aerial

bacteria and other harmful substances.

l

=

Sleep mode auto button*: Sets the

sleep mode auto operation.

e

y

Temperature adjustment buttons: Ad-

justs the room temperature when cool-

ing and heating.

d

- On/Off button: Turns the power on/off.

g

7

v

Indoor fan speed button: Adjusts the

fan speed.

f

AC

DBE

Operation mode selection button*: Se-

lects the operation mode.

Cooling operation (A) / Auto operation

(C) / Dehumidifying operation (D) /

Heating operation (B) / Air circulation

(E)

h

N

Jet cooling/heating button*: Warms up

or cools down the indoor temperature

within a short period of time.

ij

: ;

Air flow direction button: Adjusts the air

flow direction vertically or horizontally.

k

S

Temperature display button: Displays

the room temperature. Press key and

hold it for longer than 5 second.

Display change °C/°F

mn

z

Timer button: Sets the current time and

the Start/end time.

c

b

u

JG

Navigation and functions button*:

Adjusts the time and sets the special

functions.

J: Auto clean / G: Operates energy

saving cooling / LIGHT: Adjusts the

brightness of the indoor unit display

p

-

Set/clear button: Sets or cancels func-

tions.

r

-

Reset button: Resets the air condi-

tioner settings.

BEFORE USE

9

ENGLISH

Wireless remote control

Display

screen

Control

panel

* Some functions may not be supported, depending on the

model.

Control

panel

Display

screen

Description

/

E

AIR CIRCULATION BUTTON

Used to circulate the room air without cooling

or heating.

l

=

Sleep mode auto button*: Sets the

sleep mode auto operation.

e

y

Temperature adjustment buttons: Ad-

justs the room temperature when cool-

ing and heating.

d

- On/Off button: Turns the power on/off.

g

7

v

Indoor fan speed button: Adjusts the

fan speed.

f

AC

DB

Operation mode selection button*: Se-

lects the operation mode.

Cooling operation (A) / Auto operation

or auto changeover (C) / Dehumidify-

ing operation (D) / Heating operation

(B)

h

N

Jet cooling/heating button*: Warms up

or cools down the indoor temperature

within a short period of time.

i

:

Air flow direction button*: Adjusts the air

flow direction vertically.

k

S

Temperature display button: Displays the

room temperature. Also changes unit

from °C to °F if pressed for 5 seconds.

mn

z

Timer button: Sets the current time and

the start / end time.

c

b

|

JG

Navigation and functions button*: Ad-

justs the time and sets the special

functions.

J: Auto clean / G: Operates energy

saving cooling / LIGHT : Adjusts the

brightness of the indoor unit display

p

-

Set/clear button: Sets or cancels func-

tions.

r

-

Reset button: Resets the air condi-

tioner settings.

10

BEFORE USE

ENGLISH

Inserting batteries

Insert batteries before using the remote

control. The battery type used is AAA (1.5 V).

1 Remove the battery cover.

2 Insert the new batteries and make sure

that the + and - terminals of the batteries

are installed correctly.

3 Reattach the battery cover.

Installing the remote control holder

Install the holder where there is no direct sun-

light to protect the remote control.

1 Choose a safe and easily-accessible place.

2 Fix the holder by fastening the 2 screws

firmly with a screwdriver.

3 Slide the remote control into the holder.

Point the remote control towards the signal

receiver at the bottom of the air conditioner to

operate it.

NOTE

!

If the display screen of the remote control

starts to fade, replace the batteries.

NOTE

!

• The remote control may operate other

electronic devices if pointed towards

them. Make sure to point the remote

control towards the signal receiver of

the air conditioner.

• For proper operation, use a soft cloth to

clean the signal transmitter and receiver.

Operating method

BASIC FUNCTIONS

11

ENGLISH

BASIC FUNCTIONS

Cooling your room

(Cooling operation)

1 Press d to turn on the power.

2 Press f repeatedly to select the cooling

operation.

- A is displayed on the display screen.

3 Press u or v to set the desired tempera-

ture.

- The temperature range is 18°C - 30°C.

Heating your room

(Heating operation)

1 Press d to turn on the power.

2 Press f repeatedly to select the heating

operation.

- B is displayed on the display screen.

3 Press u or v to set the desired tempera-

ture.

- The temperature range is 16°C - 30°C

Removing humidity

(Dehumidifying operation)

This mode removes excess moisture from an

environment with high humidity or in the rainy

season, in order to prevent mold from setting

in. This mode adjusts the room temperature

and the fan speed automatically to maintain

the optimal level of humidity.

1 Press d to turn on the power.

2 Press f repeatedly to select the dehu-

midifying operation.

-

D is displayed on the display screen.

NOTE

!

• In this mode you cannot adjust the room

temperature, as it is adjusted automati-

cally. Also, the room temperature is not

displayed on the display screen.

NOTE

!

Cooling-only models do not support this

function.

12

BASIC FUNCTIONS

ENGLISH

Airing your room

(Air Circulation operation)

This mode only circulates the indoor air

without changing the room temperature.

1 Press d to turn on the power.

2 Press f repeatedly to select the air circu-

lation operation.

Or press / to select the air circulation op-

eration.

- E is displayed on the display screen.

3 Press gto adjust the fan speed.

Adjusting the fan speed

1 Press grepeatedly to adjust the fan

speed.

- Select

5

if you want natural air.

The fan speed adjusts automatically.

Adjusting the air ﬂow direc-

tion

1 To adjust the direction of the air flow verti-

cally, press i repeatedly and select the

desired direction.

- Select : to adjust the direction of the air

flow automatically.

2 To adjust the direction of the air flow hori-

zontally, press j repeatedly and select

the desired direction.

- Select I to adjust the direction of the

air flow automatically.

Setting the timer

You can use the timer function to save energy

and to use the air conditioner more efficiently.

Setting the current time

1 Press p and hold it for longer than 3 sec-

onds.

- The AM/PM icon flickers at the bottom of

the display screen.

NOTE

!

• Adjusting the air flow direction horizon-

tally may not be supported, depending

on the model.

• Adjusting the air deflector arbitrarily may

cause product failure.

• If you restart the air conditioner, it starts

to operate with the previously set direc-

tion of air flow, so the air deflector may

not match the icon displayed on the re-

mote control. When this occurs, press

i or j to adjust the direction of the

air flow again.

BASIC FUNCTIONS

13

ENGLISH

2 Press

o

or

q

to select the minutes.

3 Press p to finish.

Turning on the air conditioner auto-

matically at a set time

1 Press m.

- The icon below flickers at the bottom of

the display screen.

2 Press

o

or

q

to select the minutes.

3 Press pto finish.

Turning off the air conditioner auto-

matically at a set time

1 Press n.

- The icon below flickers at the bottom of

the display screen.

2 Press

o

or

q

to select the minutes.

3 Press pto finish.

Canceling the timer setting

1 Press m.

2 Press m or n to select the timer setting

to cancel.

3 Press p.

- To cancel all timer settings, press

p.

Setting sleep mode

Use the sleep mode to turn off the air condi-

tioner automatically when you go to sleep.

1 Press dto turn on the power.

2 Press l

3 Press

o

or

q

to select the hour

(up to 7 hours).

4 Press pto finish.

-

T is displayed on the display screen in

sleep mode.

NOTE

!

In the Cooling and Dehumidifying modes,

the temperature increases by 1°C after 30

minutes and by a further 1°C after another

30 minutes for a more comfortable sleep.

The temperature increases with up to 2°C

from the preset temperature.

14

ADVANCED FUNCTIONS

ENGLISH

ADVANCED FUNCTIONS

The air conditioner offers some additional ad-

vanced functions.

Changing room temperature

quickly

(Jet Cool/Heat operation)

This mode allows you to cool indoor air quickly

in summer or warm it quickly in winter.

1 Press dto turn on the power.

2 Press h.

- In jet cooling mode, strong air blows out

at a temperature of 18°C for 30 minutes.

- In jet heating mode, strong air blows out

at a temperature of 30°C for 30 minutes.

Indoor air puriﬁcation

Auto Clean operation

In the cooling and dehumidifying operations,

moisture is generated inside the indoor unit.

Use the auto cleaning function to remove

such moisture.

1 Press dto turn on the power.

2 Press c.

-

J is displayed on the display screen.

- If you turn off the power, the fan oper-

ates for 30 minutes and cleans the inside

of the indoor unit.

NOTE

!

• In Air Circulation, Auto, or Auto

Changeover mode, this function cannot

be used.

• This function may not be supported, de-

pending on the model.

NOTE

!

Some buttons cannot be used while the

auto cleaning function is in operation.

ADVANCED FUNCTIONS

15

ENGLISH

Plasma Puriﬁcation operation

The plasma filter developed by LG removes

microscopic contaminants from the intake air

completely to supply clean and fresh air.

1 Press dto turn on the power.

2 Press a.

-

F is displayed on the display screen.

Auto operation

(Artiﬁcial intelligence)

You can set desired temperature and indoor

fan speed. Setting Temp. Range : 18~30℃

1 Press dto turn on the power.

2 Press frepeatedly to select auto opera-

tion.

NOTE

!

• You can use this function by pressing

a without turning the air conditioner

on.

• Both the plasma lamp and the cooling

lamp light up while plasma purification is

in operation.

• This function may not be supported, de-

pending on the model.

NOTE

!

• In this mode, you can set the air deflec-

tor to rotate automatically.

• This function may not be supported, de-

pending on the model.

16

ADVANCED FUNCTIONS

ENGLISH

Energy saving cooling mode

This mode minimizes power consumption dur-

ing cooling and increases the set temperature

to the optimal level for a more comfortable en-

vironment.

1 Press dto turn the power on.

2 Press frepeatedly to select the cooling

operation.

3 Press b.

-

G is displayed on the display screen.

Display screen brightness

You can adjust the brightness of the indoor

unit display screen.

1 Press

u

or | repeatedly to set the

brightness to the desired level.

Operating the air conditioner

without the remote control

You can use the On/Off button of the indoor

unit to operate the air conditioner when the

remote control is unavailable. However, the

fan speed is set to high.

1 Open the front cover.

- Lift up both sides of the cover slightly.

2 Press the On/Off button.

- For cooling and heating models, the oper-

ation mode changes, depending on the

operation mode of outdoor unit.

NOTE

!

This function may not be supported,

depending on the model.

NOTE

!

This function may not be supported,

depending on the model.

ON/OFF

button

* The feature can be changed according a

type of model.

* The feature can be changed according a

type of model.

ADVANCED FUNCTIONS

17

ENGLISH

Restarting the air conditioner

automatically

When the air conditioner is turned on again

after a power failure, this function restores the

previous settings. This function is a factory de-

fault setting.

1 Open the front cover.

- Lift up both sides of the cover slightly.

2 Press the On/Off button and hold it for 6

seconds.

- The unit will beep twice and the lamp will

blink 6 times.

- To re-enable the function, press the On/

Off button and hold it for 6 seconds. The

unit will beep twice and the blue lamp will

blink 4 times.

ON/OFF

button

Disabling auto restart

NOTE

!

If you press and hold the On/Off button

for 3 – 5 seconds instead of 6 seconds,

the unit will switch to the test operation.

In the test operation, the unit blows out

strong air for cooling for 18 minutes and

then returns to the factory default set-

tings.

* The feature can be changed according a

type of model.

* The feature can be changed according a

type of model.

18

MAINTENANCE

ENGLISH

MAINTENANCE

Clean the product regularly to maintain optimal performance and to prevent possible breakdown.

* This may not be provided, depending on the model.

Item

Cleaning interval

Cleaning method

Air filter 2 weeks See "Cleaning the air filter"

Anti-allergy filter / Triple filter 3 months

See

"Cleaning the anti-allergy filter and triple fil-

ter"

Plasma filter* 3 months See “Cleaning the plasma filter.”

Indoor unit surface Regularly

Use a soft, dry cloth. Do not use bleach or

abrasives.

Outdoor unit Regularly

Use steam to clean the heat exchanger coils

and the panel vents (consult with technician).

Anti-allergy ﬁlter

Plasma ﬁlter(option)

Air ﬁlter

Triple ﬁlter

Air ﬁlter

Anti-allergy ﬁlter

+ Triple ﬁlter

Plasma ﬁlter

CAUTION

• Turn off the power and unplug the power cord before you perform any maintenance; other-

wise it may cause electric shock.

• Never use water that is hotter than 40°C when you clean the filters. It may cause deforma-

tion or discoloration.

• Never use volatile substances when you clean the filters. They may damage the surface of

the product.

!

NOTE

!

• The location and shape of the filters may differ, depending on the model.

• Make sure to clean the heat exchanger coils of the outdoor unit regularly, as dirt collected

in the coils may decrease the operational efficiency or increase energy costs.

* The feature can be changed according a type of model.

MAINTENANCE

19

ENGLISH

Cleaning the air ﬁlter

Clean the air filter once every 2 weeks or

more if necessary.

1 Turn off the power and unplug the power

cord.

2 Open the front grille.

- Lift up both sides of the cover slightly.

3 Hold the knob of the air filter, lift it up

slightly and remove it from the unit.

4 Clean the filter with a vacuum cleaner or

with warm water.

- If dirt is difficult to remove, wash the filter

in lukewarm water with detergent.

5 Dry the filter in the shade.

Cleaning the anti-allergy ﬁlter

and triple ﬁlter

1 Turn off the power and unplug the power

cord.

2 Open the front grille and remove the air fil-

ter (see “Cleaning air filter”).

3 Pull out the anti-allergy filter and the triple

filter.

4 Dry the filter in direct sunlight for 2 hours.

Cleaning the plasma ﬁlter

1 Turn off the power and unplug the power

cord.

2 Open the front grille and remove the air fil-

ter (see “Cleaning the air filter”).

3 Remove the plasma filter in 10 seconds.

4 Use a vacuum cleaner to remove any dirt.

- If dirt is difficult to remove, wash the filter

with lukewarm water.

5 Dry the filter in the shade.

NOTE

!

• The location and shape of the filters may

differ, depending on the model.

• The feature can be changed according a

type of model.

NOTE

!

• The location of the filters may differ, de-

pending on the model.

• The plasma filter may not be included in

some models.

• The feature can be changed according a

type of model.

20

TROUBLESHOOTING

ENGLISH

TROUBLESHOOTING

Self-diagnosis function

This product has a built-in self-diagnosis function. If an error occurs, the lamp of the indoor unit

will blink in 2 second intervals. If this occurs, contact your local dealer or service center.

Before requesting service

Please check the following before you contact the service center. If the problem persists, contact

your local service center.

Problem Possible causes Corrective action

Abnormal operating condi-

tions.

• There is a burning

smell and a strange

sound coming from

the unit.

• Turn off the air conditioner, unplug the

power cord and contact the service cen-

ter.

• Water leaks from

the indoor unit even

when the humidity

level is low.

• The power cord is

damaged or gener-

ating excessive

heat.

•

A switch, a circuit

breaker (safety,

ground) or a fuse is

not operated properly.

The air conditioner does not

work.

• The air conditioner

is unplugged.

• Check whether the power cord is

plugged into the outlet.

• A fuse is blown or

the power supply is

blocked.

• Replace the fuse or check if the circuit

breaker has tripped.

• A power failure has

occurred.

• Turn off the air conditioner when a power

failure occurs.

• When the power is restored, wait 3 min-

utes, and then turn on the air conditioner.

• The voltage is too

high or too low.

• Check if the circuit breaker has tripped.

• The air conditioner

turned off automati-

cally at a preset

time.

• Press the power button again.

• Battery setting is

wrong in the remote

controller.

• Is the battery inserted in Remoted con-

troler? Is the battery inserted with the

correct terminal (+)(-)?

• Even if you check the upper lists, the air-

conditioner does not operate. Please re-

place new batteries.

La pagina sta caricando ...

LG MS07AWR Manuale del proprietario

Questo manuale è adatto anche per

LG MS07AWR Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti