Canon Vixia HF-G70 Manuale utente

PUB.DIE-0569-000A

4K Camcorder

Instruction Manual

2

Trademark Acknowledgements

• SD, SDHC and SDXC Logos are trademarks of SD-3C, LLC.

• Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.

• macOS is a trademark of Apple Inc., registered in the U.S. and other countries.

• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing

Administrator, Inc. in the United States and other countries.

• USB Type-C™ and USB-C™ are trademarks of USB Implementers Forum.

• Other names and products not mentioned above may be trademarks or registered trademarks of their respective companies.

• This device incorporates exFAT technology licensed from Microsoft.

• “Full HD 1080” refers to Canon camcorders compliant with high-definition video composed of 1,080 vertical pixels

(scanning lines).

• This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding MPEG-4

compliant video and/or decoding MPEG-4 compliant video that was encoded only (1) for a personal and non-

commercial purpose or (2) by a video provider licensed under the AT&T patents to provide MPEG-4 compliant video. No license is

granted or implied for any other use for MPEG-4 standard.

• THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER

USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC

VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS

OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY

OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM

3

Highlights of the Camcorder

The Canon VIXIA HF G70 4K Camcorder is a high-performance camcorder whose compact size

makes it ideal in a variety of situations. The following are just some of the many functions featured in

the camcorder.

4K Recording

CMOS sensor and DIGIC DV 6 image

processor

The camcorder is equipped with a

1/2.3-inch CMOS sensor that captures video

at an effective pixel count of approximately

8.29 megapixels (3840x2160). The video is

then processed by the DIGIC DV 6 image

processor. In addition to recording 4K video,

the camcorder employs oversampling to

record Full HD video.

Wide zoom lens and 8-bladed aperture

The zoom lens is equipped with 20x optical

zoom and has a focal length at full wide angle

of 29.3 mm* (35 mm equivalent), making the

camcorder versatile in a variety of shooting

situations. The 8-bladed aperture delivers a

pleasing out-of-focus blur (“bokeh”) to your

recordings.

* When the resolution is 3840x2160 and the

image stabilization is a setting other than

Dynamic IS. The focal length is 30.6 mm

when using Dynamic IS.

4K recording at 29.97P and HD

recording at 59.94P

The camcorder can record clips in MP4

format at 3840x2160 with a frame rate of

29.97P or 1920x1080 with a frame rate of

59.94P, giving you the freedom to choose the

video configuration that is most suitable for

your project.

Convenience and Functionality

Recording for extended periods

With its two SD card slots, the camcorder

allows you to use dual recording (A 29) to

record the same clip on two SD cards, or relay

recording to automatically switch to the other

SD card when the one being used becomes

full. Dual recording is a convenient way to

create a backup of your recordings while relay

recording effectively extends the available

recording time.

Emphasis on versatility

This camcorder has features to make it usable

as a main camera but is also small enough to

be very portable. The advanced image

stabilization (A60), which stabilizes the

image along 5 axes, will let you shoot in a

variety of situations in the field. The LCD touch

panel and viewfinder can be angled in a variety

of positions, allowing for shooting in tight

places, for example.

Manual controls at your fingertips

The focus/zoom ring helps you achieve the

focus you are looking for. You can easily

change the ring's functionality so that you can

operate the zoom. You can also assign certain

frequently used functions to a customizable

button and adjust those functions with the

accompanying dial (A79). Additionally, the

camcorder also features 5 assignable buttons

on the camcorder and one onscreen

assignable touch button to which you can

assign a variety of functions to access them

with ease (A80).

Face detection & tracking (A 58)

After detecting a subject's face, the camcorder

can focus on it and even track it. Furthermore,

the camcorder can be in manual focus but

switch to autofocus when a face is detected,

ensuring that important subjects are in focus.

4Creativity and Artistic Expression

Special recording modes (A35, 73)

When you make recordings, you can change

the recording frame rate to achieve a fast or

slow motion effect. Alternatively, you can use

pre-recording to record 3 seconds before you

decide to start recording, helping you capture

those hard-to-catch opportunities.

Looks (A48)

You can adjust various aspects of the picture,

such as the color depth, sharpness and

brightness, to create a desired “look”.

Custom picture settings (A82)

Select one of the preset color settings or set

the combination of gamma curve, color space

and color matrix that you wish to use. Then,

you can adjust a number of other image-

related parameters in detail.

Other Features

• Menu settings file that can be saved in the

camcorder or on an SD card to restore all the

menu settings or replicate them on another

HF G70 camcorder (A90).

• Battery packs compatible with Intelligent

System give you an estimate (in minutes) of

the remaining recording time.

• Compatibility with the optional GP-E2 GPS

Receiver to geotag your recordings (A77).

• Compatibility with the optional RC-V100

Remote Controller (A75) when you need a

professional level of remote control.

5

1 Introduction 7

About this Manual 7

Conventions Used in this Manual 7

Supplied Accessories 9

Names of Parts 10

2 Preparations 14

Charging the Battery Pack 14

Using a Power Outlet 15

Preparing the Camcorder 17

Using the Lens Hood 17

Adjusting the LCD Screen 17

Using the Viewfinder 18

Grip Belt and Straps 19

Basic Operation of the Camcorder 20

Turning the Camcorder On and Off 20

Setting the Camera Mode 21

Using the MENU Button and

Joystick 21

First Time Settings 22

Setting the Date and Time 22

Changing the Language 23

Changing the Time Zone 23

Using the Menus 24

Setup Menus 24

FUNC Menu 25

Using SD Cards 27

Compatible SD Cards 27

Inserting and Removing an SD Card 28

Initializing an SD Card 29

Selecting the SD Card for

Recordings 29

Dual Recording and Relay Recording 29

Recovering Clips 30

3 Recording 31

Recording Clips and Photos 31

Basic Recording 31

Reviewing the Latest Clip Recorded 33

Video Configuration: Resolution, Bit Rate

and Frame Rate 34

Selecting the Resolution and Bit

Rate 34

Selecting the Frame Rate 34

Slow & Fast Motion Recording 35

Shooting Modes 36

Special Scene Modes 37

Exposure Adjustment 39

Manual Exposure (n)39

Momentary Automatic Aperture - Push

Auto Iris 40

Automatic Exposure 40

Touch Exposure 41

Exposure Lock (AE Lock) 42

Exposure Compensation 42

ND Filter 43

Using the Zebra Pattern 43

Backlight Correction 44

Automatic Gain Control (AGC) Limit 45

White Balance 46

Using Looks 48

Zooming 49

Using the Focus/Zoom Ring 49

Using the Zoom Rocker 50

Using the Touch Screen’s Zoom

Controls 51

Using an Optional Remote Controller 51

Soft Zoom Control 52

Digital Tele-Converter 52

Focus Adjustment 54

Manual Focus 54

Autofocus 57

Face Detection & Tracking 58

Image Stabilization 60

Dynamic IS or Standard IS 60

Setting the Time Code 61

Selecting the Time Code Mode 61

Selecting Drop Frame or Non-Drop

Frame 63

Overlaying the Time Code/Date/Time on

the Recorded Image 63

Setting the User Bit 64

Recording Audio 65

Audio Scenes 65

Audio Level Adjustment Using the FUNC

Menu 67

Microphone Attenuator (Built-in

Microphone or MIC Terminal) 67

Low-Cut Filter (MIC Terminal) 67

Wind Screen (Built-in Microphone) 68

Microphone Directionality (Built-in

Microphone) 68

Frequency Response (Built-in

Microphone) 69

Audio Limiter 69

Audio Compressor 69

Table of contents

6

Using Headphones 71

Color Bars/Audio Reference Signal 72

Recording Color Bars 72

Recording an Audio Reference

Signal 72

Pre-Recording 73

Onscreen Displays 74

Using the Optional RC-V100 Remote

Controller 75

Web Camera Function 76

Using the GP-E2 GPS Receiver 77

Connecting the GPS Receiver 77

4 Customization 79

CUSTOM Dial and Button 79

Assignable Buttons 80

Custom Picture Settings 82

Selecting Custom Picture Files 82

Preset Custom Picture 82

Editing a Custom Picture File’s

Settings 83

Protecting Custom Picture Files 83

Displaying the Current Custom Picture

File Settings 84

Saving a Custom Picture File 84

Available Custom Picture Settings 85

Saving and Loading Menu Settings 90

Saving Camcorder Settings 90

Loading Camcorder Settings 90

5 Playback 91

Basic Playback 91

Playback Controls 93

Adjusting the Volume 94

Displaying Clip Information 94

Clip and Photo Operations 95

Deleting Clips and Photos 95

Trimming Clips 96

6 External Connections 97

Video Output Configuration 97

Connecting to an External Monitor 99

Connection Diagram 99

Using the HDMI OUT Terminal 99

7 Saving Clips 101

Working with Clips on a Computer 101

Copying Clips and Photos Between

Cards 102

8 Additional Information 103

Menu Options 103

FUNC Menu 103

Setup Menus 104

Appendix: Onscreen Icons and

Displays 112

Troubleshooting 116

List of Messages 120

Safety Instructions and Handling

Precautions 122

Camcorder 123

Battery Pack 124

SD Card 124

Built-in Rechargeable Lithium

Battery 125

Disposal 125

Maintenance/Others 126

Cleaning 126

Condensation 126

Viewing the Certification Logo 126

Using the Camcorder Abroad 127

Optional Accessories 128

Specifications 131

Reference Tables 134

Approximate recording times 134

Charging, Recording and Playback

Times 134

Index 135

About this Manual

7

Introduction

About this Manual

Thank you for purchasing the Canon VIXIA HF G70. Please read this manual carefully before you use

the camcorder and retain it for future reference. Should your camcorder fail to operate correctly, refer

to

Troubleshooting

(A116).

Conventions Used in this Manual

• IMPORTANT: Precautions related to the camcorder’s operation.

• NOTES: Additional topics that complement the basic operating procedures.

•A: Reference page number within this manual.

• The following terms are used in this manual:

“SD card” refers to an SD, SDHC or SDXC memory card.

“Screen” refers to the LCD screen and the viewfinder screen.

“Clip” refers to one movie unit from the point you press the START/STOP button to start recording

until you press again to pause the recording.

• The photos included in this manual are simulated pictures taken with a still camera.

• Some screenshots in this manual have been simplified to show only relevant icons.

Before Using the Camcorder

• Before making important recordings for the first time, make test recordings using the video

configuration(s) you plan to use to check that the camcorder operates correctly. Should it fail to

operate correctly, refer to

Troubleshooting

(A116).

•Copyright notice: Unauthorized recording of copyrighted materials may infringe on the rights of

copyright owners and be contrary to copyright laws.

•Notes on privacy and publicity rights regarding the use of video: When using the camcorder, exercise

proper caution in order to protect privacy and avoid any violation of publicity rights.

•About the LCD screen and viewfinder: The screen is produced using extremely high-precision

manufacturing techniques, with more than 99.99% of the pixels operating to specification. Very

rarely, pixels may misfire or light up permanently. This has no effect on the recorded image and

does not constitute a malfunction.

•About the access indicator: Observe the following precautions while the ACCESS indicator (A28)

is illuminated or flashing in red. Failing to do so may result in permanent data loss.

- Do not disconnect the power source or turn off the camcorder.

- Do not open the card compartment cover.

- Do not change the camcorder’s operating mode.

- When a USB cable is connected to the camcorder, do not disconnect the USB cable.

1Introduction

About this Manual

8

Brackets [ ] are used to

refer to onscreen buttons

and menu options you will

select and to other

onscreen messages and

displays.

These icons indicate the camcorder’s operating mode and whether a function is available in that

mode.

: Indicates whether the

camcorder is in shooting (CAMERA) or

playback (MEDIA) mode. In this example, the

function is available only in mode. For

details, refer to

Turning the Camcorder On

and Off

(A20).

: Indicates the camera mode. For

details, refer to

Setting the Camera Mode

(A21).

The > arrow is used to abbreviate menu

selections. For details on how to use the

menus, refer to

Using the Menus

(A24).

For a summary of available menu options

and settings, refer to the appendix

Menu

Options

(A103).

Supplied Accessories

9

Supplied Accessories

The following accessories are supplied with the camcorder:

PD-E1 USB Power Adapter Cable Clamp

(comes pre-attached to the

camcorder)

BP-820 Battery Pack

Lens hood with lens barrier Lens cap Quick Guide

Names of Parts

10

Names of Parts

1 Lens barrier switch (A31)

2SD card slot 2 (A27)

3SD card slot 3 (A27)

4u (review recording) button (A33)/

Assignable button 5 (A80)

5 Lens hood (A17)

6 Focus/Zoom ring (A49, 54)

7 CUSTOM (customizable) dial (A79)

8 CUSTOM (customizable) button

(A79)

9 SD card compartment cover

10 DISP (onscreen display) button

(A74)/BATT. INFO (battery

information) button (A15)

4

108765

1

32

9

Left side view

Names of Parts

11

1 Built-in speaker (A94)

2MIC terminal (A65)

3 HDMI OUT terminal (A99, 99)

4 REMOTE terminal (A75)

For connecting commercially

available remote controllers.

5×(headphones) terminal (A71)

6USB terminal (A77)

7DC IN terminal (A14)

8 Cable clamp (A15)

9 Grip belt (A19)

25

63

4

97

1

8

Right side view

Names of Parts

12

1 Instant AF sensor (A57, 126)

2 AF/MF button (A54)/

Assignable button 1 (A80)

3 PRE REC (pre-recording) button

(A73)/

Assignable button 2 (A80)

4 LCD touch screen (A17)

5 Focus/Zoom ring switch (A49, 54)

6Viewfinder (A18)

7 Dioptric adjustment lever (A18)

8 Joystick/SET button (A21)

9 Strap mount (A19)

10 Assignable button 3 (A80)

11 Assignable button 4 (A80)

12 Battery attachment unit (A14)

13 START/STOP button (A31)

14 MENU button (A24)

15 Serial number

1

45

6

7

8

9

14

15

13121110

3

2

Front view

Back view

Names of Parts

13

1 Power switch (A20)

2 POWER / CHG (battery charging)

indicator (A14)

3 Built-in stereo microphone

(A65)

4 Accessory shoe

5 Camera mode switch (A21)

6 Grip zoom rocker (A50)

7 ACCESS indicator (A31)

8 Lens hood mount index mark

9 Tripod socket

For mounting the camcorder on a

tripod with a mounting screw 6.2 mm

(0.24 in.) or shorter (A123).

10 BATTERY RELEASE switch (A15)

11 Eye cup (A18)

3

4

5

6

7

1

2

8

9

10

11

Top view Bottom view

Charging the Battery Pack

14

Preparations

Charging the Battery Pack

The camcorder can be powered with a battery pack or directly using the PD-E1 USB Power Adapter.

1 Connect the USB power adapter to the camcorder

and plug the power cord into a power outlet.

2 Attach the battery pack to the camcorder.

• Press the battery pack softly into the battery attachment

unit and slide it forward until it clicks in place.

3 Charging will start when the camcorder is turned off.

• If the camcorder was on, the green POWER/CHG indicator

will go out when you turn off the camcorder. After a

moment, the POWER/CHG indicator will turn on in red

(battery pack charging). The red POWER/CHG indicator will

go out when the battery pack is fully charged.

• If the indicator flashes, refer to

Troubleshooting

(A118).

DC IN terminal

POWER/CHG (battery charging) indicator

2Preparations

Charging the Battery Pack

15

To remove the battery pack

1 Slide the BATTERY RELEASE switch in the direction of the

arrow and hold it pressed down (햲).

2 Slide the battery pack and then pull it out (햳).

Checking the Remaining Battery Charge

With the camcorder turned off, press the BATT. INFO button to display for about 5 seconds a screen

showing the approximate battery charge level. Note that if the battery charge is too low, the battery

information screen may not appear.

Using a Power Outlet

You can power the camcorder directly from a power outlet

using the USB power adapter.

1 Plug the USB power adapter into a power outlet.

2 Attach the cable clamp to the grip belt and use it to

secure the cable.

• The ferrite core should be placed between the USB plug

and the cable clamp.

3 Connect the USB plug to the DC IN terminal.

• [DC IN] will be displayed when you turn on the

camcorder.

BATTERY

RELEASE

switch

햲

햳

햴

Charging the Battery Pack

16

IMPORTANT

• Do not connect to the USB power adapter any electrical equipment that is not expressly

recommended for use with this camcorder.

• Turn off the camcorder before connecting or disconnecting the USB power adapter. After you turn

off the camcorder, important data is updated on the SD card. Be sure to wait until the green

POWER/CHG indicator goes out.

• When using the USB power adapter, do not fix it permanently to one place as this may cause a

malfunction.

• To prevent equipment breakdowns and excessive heating, do not connect the USB power adapter

to voltage converters for overseas travels or special power sources such as those on aircraft and

ships, DC-AC inverters, etc.

NOTES

• We recommend charging the battery pack in temperatures between 10 °C and 30 °C (50 °F and

86 °F). If either the ambient temperature or the battery pack’s temperature is outside the range of

approx. 0 °C to 40 °C (32 °F to 104 °F), charging will not start.

• The battery pack will be charged only when the camcorder is off.

• If the power supply was disconnected while charging a battery pack, make sure the POWER/CHG

indicator has gone out before restoring the power supply.

• If remaining battery time is an issue, you can power the camcorder using the USB power adapter so

the battery pack will not be consumed.

• While recording, it is recommended to attach a battery pack to the camcorder even when the USB

power adapter is connected. This will prevent the camcorder from turning off in case of a power

outage or an accidental disconnection of the cable.

• Charged battery packs continue to discharge naturally. Therefore, charge them on the day of use, or

the day before, to ensure a full charge.

• The first time you use a battery pack, fully charge it and then use the camcorder until the battery

pack is completely depleted. Doing so will ensure that the remaining recording time will be displayed

accurately.

• The camcorder's power consumption may vary depending on the usage conditions. When

recording, it is recommended to prepare a battery charge level that allows for a longer recording

time than planned (2 to 3 times).

• For handling precautions regarding the battery pack, refer to

Safety Instructions and Handling

Precautions

(A122).

• For charging times and approximate usage times, refer to

Reference Tables

(A134).

Preparing the Camcorder

17

Preparing the Camcorder

This section covers the basic preparations for the camcorder such as attaching the lens hood,

adjusting the grip belt and adjusting the viewfinder and LCD screen.

IMPORTANT

• Be careful not to drop the camcorder when attaching, removing or adjusting the various

accessories. Using a table or other stable surface is recommended.

Using the Lens Hood

While recording, the supplied lens hood with lens barrier is

effective for reducing stray light that can be the cause of lens

flare and ghost images. Additionally, closing the lens barrier

can help prevent fingerprints and dirt accumulation on the

lens.

1 Remove the lens cap.

2 Align the mark on the lens hood with the lens hood

mount index mark on the bottom of the camcorder

(햲), and then turn the lens hood clockwise until it

stops with a click (햳).

• Be careful not to deform the lens hood.

• Make sure that the lens hood is aligned with the thread.

• To remove the lens hood, turn it counterclockwise.

NOTES

About the lens cap:

• Use the supplied lens cap when carrying the camcorder or storing it after use.

• Note that the lens cap and the lens hood with lens barrier cannot be used simultaneously.

Adjusting the LCD Screen

Open the LCD panel 90 degrees.

• You can rotate the panel downward or toward the lens.

Subject can monitor the LCD screen

Preparing the Camcorder

18

NOTES

• You can adjust the brightness and the backlight level of the LCD screen with the > [£

Display Setup] > [LCD Brightness] or [LCD Backlight] setting respectively. Also, you can hold the

DISP button pressed down for more than 2 seconds to open the [LCD Backlight] setup menu.

• Adjusting the brightness does not affect the brightness of recordings.

• Using a brighter LCD backlight setting will shorten the effective usage time of the battery pack.

• When the LCD panel is turned 180 degrees toward the subject, you can use the >

[£Display Setup] > [LCD Mirror Image] setting to reverse the screen’s image horizontally,

showing a mirror image of the subject.

• For details about how to take care of the LCD screen, refer to

Handling Precautions

(A123),

Cleaning

(A126).

Using the Viewfinder

If it is difficult to use the LCD screen, you can use the viewfinder, which can be tilted 45 degrees

upward.

1 Use the power switch to turn on the camcorder.

(A20).

2 Close the LCD panel (햲).

3 Pull out the viewfinder and adjust the viewing angle

(햳).

4 Adjust the viewfinder using the dioptric adjustment

lever (햴).

NOTES

• You can adjust the brightness of the viewfinder with the > [£Display Setup] > [VF

Luminance] setting.

• Adjusting the brightness does not affect the brightness of recordings.

• Using a brighter setting will shorten the effective usage time of the battery pack.

• You cannot use the LCD screen and viewfinder simultaneously.

• Make sure you keep the eye cup attached when using the

camcorder.

If you wear glasses, you may find the viewfinder easier to

use if you flip back the outer edge of the eye cup toward the

camcorder body.

• For details about how to take care of the viewfinder, refer to

Handling Precautions

(A123),

Cleaning

(A126).

햲

햴

햳

Dioptric

adjustment

lever

Preparing the Camcorder

19

Grip Belt and Straps

Fasten the grip belt.

• Adjust the grip belt so that you can reach the grip zoom

rocker with your index finger, and the START/STOP button

with your thumb.

Attaching an optional wrist strap

Attach the wrist strap to the strap mount on the grip belt,

adjust the length and fasten.

• You can use both for extra convenience and protection.

Attaching an optional shoulder strap

Pass the ends of the shoulder strap

through the strap mount on the grip belt

and adjust the length of the strap.

Basic Operation of the Camcorder

20

Basic Operation of the Camcorder

Turning the Camcorder On and Off

You can choose to turn the camcorder on in CAMERA ( ) mode for making recordings or MEDIA

( ) mode for playing back recordings. Select the mode using the power switch.

To turn on the camcorder

Set the power switch to CAMERA for mode (A31) or

MEDIA for mode (A91).

• The POWER/CHG indicator will illuminate in green.

To turn off the camcorder

Set the power switch to OFF.

• The POWER/CHG indicator will go out.

NOTES

• You can use the > [BSystem Setup] > [POWER LED] setting to prevent the POWER

indicator from illuminating.

POWER/CHG indicator

mode mode

La pagina sta caricando ...

Canon Vixia HF-G70 Manuale utente

Canon Vixia HF-G70 Manuale utente

in altre lingue

Documenti correlati