Canon XA60 Manuale utente

PUB.DIE-0566-000A

4K Camcorder

Instruction Manual

2

Trademark Acknowledgements

• SD, SDHC and SDXC Logos are trademarks of SD-3C, LLC.

• Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.

• macOS is a trademark of Apple Inc., registered in the U.S. and other countries.

• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing

Administrator, Inc. in the United States and other countries.

• USB Type-C™ and USB-C™ are trademarks of USB Implementers Forum.

• Other names and products not mentioned above may be trademarks or registered trademarks of their respective companies.

• This device incorporates exFAT technology licensed from Microsoft.

• “Full HD 1080” refers to Canon camcorders compliant with high-definition video composed of 1,080 vertical pixels

(scanning lines).

• This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding MPEG-4

compliant video and/or decoding MPEG-4 compliant video that was encoded only (1) for a personal and non-

commercial purpose or (2) by a video provider licensed under the AT&T patents to provide MPEG-4 compliant video. No license is

granted or implied for any other use for MPEG-4 standard.

• THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER

USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC

VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS

OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY

OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM

3

Highlights of the Camcorder

The Canon XA65 / XA60 4K Camcorder is a high-performance camcorder whose compact size

makes it ideal in a variety of situations. The following are just some of the many functions featured in

the camcorder.

4K Recording

CMOS sensor and DIGIC DV 6 image

processor

The camcorder is equipped with a

1/2.3-inch CMOS sensor that captures video

at an effective pixel count of approximately

8.29 megapixels (3840x2160). The video is

then processed by the DIGIC DV 6 image

processor. In addition to recording 4K video,

the camcorder employs oversampling to

record Full HD video.

XF-AVC and MP4 formats

You can choose the video format according to

your workflow needs. You can record in XF-

AVC format or MP4 format. Both formats use

the MPEG-4 AVC/H.264 codec, but XF-AVC

clips are recorded as Material eXchange

Format (MXF files), compatible with all major

non-linear (NLE) editing software.

Wide zoom lens and 8-bladed aperture

The zoom lens is equipped with 20x optical

zoom and has a focal length at full wide angle

of 29.3 mm* (35 mm equivalent), making the

camcorder versatile in a variety of shooting

situations. The 8-bladed aperture delivers a

pleasing out-of-focus blur (“bokeh”) to your

recordings.

* When the resolution is 3840x2160 and the

image stabilization is a setting other than

Dynamic IS. The focal length is 30.6 mm

when using Dynamic IS.

4K recording at 29.97P and HD

recording at 59.94P

The camcorder can record clips in MP4 or XF-

AVC format at 3840x2160 with a frame rate of

29.97P or 1920x1080 with a frame rate of

59.94P, giving you the freedom to choose the

video configuration that is most suitable for

your project. Furthermore, audio is recorded as

either 4-channel linear PCM or 2-channel AAC.

Convenience and Functionality

Recording for extended periods

With its two SD card slots, the camcorder

allows you to use dual recording (A 32) to

record the same clip on two SD cards, or relay

recording to automatically switch to the other

SD card when the one being used becomes

full. Dual recording is a convenient way to

create a backup of your recordings while relay

recording effectively extends the available

recording time.

Emphasis on versatility

This camcorder has features to make it usable

as a main camera but is also small enough to

be very portable. The advanced image

stabilization (A66), which stabilizes the

image along 5 axes, will let you shoot in a

variety of situations in the field. The handle unit

is removable so you can attach it to enjoy

additional audio options and infrared

functionality, or remove it when you need

improved portability. The LCD touch panel and

viewfinder can be angled in a variety of

positions, allowing for shooting in tight places,

for example.

Manual controls at your fingertips

The focus/zoom ring helps you achieve the

focus you are looking for. You can easily

change the ring's functionality so that you can

operate the zoom. You can also assign certain

frequently used functions to a customizable

button and adjust those functions with the

accompanying dial (A87). Additionally, the

camcorder also features 5 assignable buttons

on the camcorder and one onscreen

assignable touch button to which you can

assign a variety of functions to access them

with ease (A88).

4Face detection & tracking (A 64)

After detecting a subject's face, the camcorder

can focus on it and even track it. Furthermore,

the camcorder can be in manual focus but

switch to autofocus when a face is detected,

ensuring that important subjects are in focus.

Infrared recording

Record in darkness using infrared recording

(A82). With the built-in infrared light on the

handle unit, you can record nocturnal animals

in their natural environment or other such

scenes.

Creativity and Artistic Expression

Special recording modes (A40, 80)

When you make recordings, you can change

the recording frame rate to achieve a fast or

slow motion effect. Alternatively, you can use

pre-recording to record 3 seconds before you

decide to start recording, helping you capture

those hard-to-catch opportunities.

Looks (A54)

You can adjust various aspects of the picture,

such as the color depth, sharpness and

brightness, to create a desired “look”.

Custom picture settings (A90)

Select one of the preset color settings or set

the combination of gamma curve, color space

and color matrix that you wish to use. Then,

you can adjust a number of other image-

related parameters in detail.

Enhanced audio features (A 71)

The attachable handle unit offers expanded

audio options. It features two INPUT terminals

for external microphones (balanced input),

manual control over the audio recording level,

and control for supplying phantom power to an

external microphone

Other Features

• Menu settings file that can be saved in the

camcorder or on an SD card to restore all the

menu settings or replicate them on another

XA65 / XA60 camcorder (A98).

• Battery packs compatible with Intelligent

System give you an estimate (in minutes) of

the remaining recording time.

• Compatibility with the optional GP-E2 GPS

Receiver to geotag your recordings (A85).

• Compatibility with the optional RC-V100

Remote Controller (A83) when you need a

professional level of remote control.

5

1 Introduction 8

About this Manual 8

Conventions Used in this Manual 8

Supplied Accessories 10

Names of Parts 11

2 Preparations 16

Charging the Battery Pack 16

Using a Power Outlet 17

Preparing the Camcorder 19

Attaching the Microphone Holder

Unit 19

Attaching the Handle Unit 19

Using the Lens Hood 20

Adjusting the LCD Screen 20

Using the Viewfinder 21

Grip Belt and Straps 22

Basic Operation of the Camcorder 23

Turning the Camcorder On and Off 23

Setting the Camera Mode 24

Using the MENU Button and

Joystick 24

First Time Settings 25

Setting the Date and Time 25

Changing the Language 26

Changing the Time Zone 26

Using the Menus 27

Setup Menus 27

FUNC Menu 28

Using SD Cards 30

Compatible SD Cards 30

Inserting and Removing an SD Card 31

Initializing an SD Card 32

Selecting the SD Card for

Recordings 32

Dual Recording and Relay Recording 32

Recovering Clips 33

3 Recording 34

Recording Clips and Photos 34

Basic Recording 34

Reviewing the Latest Clip Recorded 36

Setting the File Name for XF-AVC

Clips 36

Video Configuration: Resolution, Bit Rate

and Frame Rate 38

Selecting the Video Format 38

Selecting the Resolution and Bit

Rate 38

Selecting the Frame Rate 38

Slow & Fast Motion Recording 40

Shooting Modes 42

Special Scene Modes 43

Exposure Adjustment 45

Manual Exposure (n)45

Momentary Automatic Aperture - Push

Auto Iris 46

Automatic Exposure 46

Touch Exposure 47

Exposure Lock (AE Lock) 48

Exposure Compensation 48

ND Filter 49

Using the Zebra Pattern 49

Backlight Correction 50

Automatic Gain Control (AGC) Limit 51

White Balance 52

Using Looks 54

Zooming 55

Using the Focus/Zoom Ring 55

Using the Zoom Rockers 56

Using the Touch Screen’s Zoom

Controls 58

Using an Optional Remote Controller 58

Soft Zoom Control 58

Digital Tele-Converter 59

Focus Adjustment 60

Manual Focus 60

Autofocus 63

Face Detection & Tracking 64

Image Stabilization 66

Dynamic IS or Standard IS 66

Setting the Time Code 67

Selecting the Time Code Mode 67

Selecting Drop Frame or Non-Drop

Frame 69

Overlaying the Time Code/Date/Time on

the Recorded Image 69

Setting the User Bit 70

Recording Audio 71

Selecting the Audio Recording Format for

MP4 Clips 71

Audio Settings and Recorded Audio

Channels 72

Connecting an External Microphone or

External Audio Input Source to the

Camcorder 73

Table of contents

6

Using Line Input or an External

Microphone Connected to an INPUT

Terminal 74

Adjusting the Microphone’s Sensitivity

(INPUT terminals) 74

Microphone Attenuator (INPUT

terminals) 75

Selecting the Built-in Microphone or an

External Microphone Connected to the

MIC Terminal 75

Audio Recording Level 75

Audio Level Adjustment Using the FUNC

Menu 76

Microphone Sensitivity (Built-in

Microphone) 77

Microphone Attenuator (Built-in

Microphone or MIC Terminal) 77

Low-Cut Filter (Built-in Microphone or

MIC Terminal) 77

Using Headphones 78

Color Bars/Audio Reference Signal 79

Recording Color Bars 79

Recording an Audio Reference

Signal 79

Pre-Recording 80

Onscreen Displays 81

Infrared Recording 82

Using the Optional RC-V100 Remote

Controller 83

Web Camera Function 84

Using the GP-E2 GPS Receiver 85

Connecting the GPS Receiver 85

4 Customization 87

CUSTOM Dial and Button 87

Assignable Buttons 88

Custom Picture Settings 90

Selecting Custom Picture Files 90

Preset Custom Picture 90

Editing a Custom Picture File’s

Settings 91

Protecting Custom Picture Files 91

Displaying the Current Custom Picture

File Settings 92

Saving a Custom Picture File 92

Available Custom Picture Settings 93

Saving and Loading Menu Settings 98

Saving Camcorder Settings 98

Loading Camcorder Settings 98

5 Playback 99

Basic Playback 99

Playback Controls 101

Adjusting the Volume 102

Displaying Clip Information 102

Clip and Photo Operations 103

Deleting Clips and Photos 103

Trimming MP4 Clips 104

6 External Connections 105

Video Output Configuration 105

Connecting to an External Monitor 108

Connection Diagram 108

Selecting the Terminal Used For

Output 108

Using the SDI OUT Terminal 109

Using the HDMI OUT Terminal 109

Audio Output 111

Selecting the Audio Channels for

Headphone or Speaker Output 111

Selecting the Audio Channels for HDMI

Output 111

7 Saving Clips 112

Working with Clips on a Computer 112

Saving MP4 Clips 112

Saving XF-AVC Clips 112

Copying Clips and Photos Between

Cards 114

8 Additional Information 115

Menu Options 115

FUNC Menu 115

Setup Menus 116

Appendix: Onscreen Icons and

Displays 125

Troubleshooting 130

List of Messages 134

Safety Instructions and Handling

Precautions 137

Camcorder 138

Battery Pack 139

SD Card 139

Built-in Rechargeable Lithium

Battery 140

Disposal 140

Maintenance/Others 141

Cleaning 141

7

Condensation 141

Viewing the Certification Logo 141

Using the Camcorder Abroad 142

Optional Accessories 143

Specifications 146

Reference Tables 149

Approximate recording times 149

Charging, Recording and Playback

Times 149

Index 152

About this Manual

8

Introduction

About this Manual

Thank you for purchasing the Canon XA65 / XA60. Please read this manual carefully before you use

the camcorder and retain it for future reference. Should your camcorder fail to operate correctly, refer

to

Troub leshoo ting

(A130).

Conventions Used in this Manual

• IMPORTANT: Precautions related to the camcorder’s operation.

• NOTES: Additional topics that complement the basic operating procedures.

•A: Reference page number within this manual.

• : Used as an abbreviation for the model indicated in the icon. The icon refers to text and

illustrations that apply only to the indicated model.

• The following terms are used in this manual:

“SD card” refers to an SD, SDHC or SDXC memory card.

“Screen” refers to the LCD screen and the viewfinder screen.

“Clip” refers to one movie unit from the point you press the START/STOP button to start recording

until you press again to pause the recording.

• The photos included in this manual are simulated pictures taken with a still camera. Unless indicated

otherwise, illustrations and menu icons refer to the .

• Some screenshots in this manual have been simplified to show only relevant icons.

Before Using the Camcorder

• Before making important recordings for the first time, make test recordings using the video

configuration(s) you plan to use to check that the camcorder operates correctly. Should it fail to

operate correctly, refer to

Troubleshooting

(A130).

•Copyright notice: Unauthorized recording of copyrighted materials may infringe on the rights of

copyright owners and be contrary to copyright laws.

•Notes on privacy and publicity rights regarding the use of video: When using the camcorder, exercise

proper caution in order to protect privacy and avoid any violation of publicity rights.

•About the LCD screen and viewfinder: The screen is produced using extremely high-precision

manufacturing techniques, with more than 99.99% of the pixels operating to specification. Very

rarely, pixels may misfire or light up permanently. This has no effect on the recorded image and

does not constitute a malfunction.

•About the access indicator: Observe the following precautions while the ACCESS indicator (A31)

is illuminated or flashing in red. Failing to do so may result in permanent data loss.

- Do not disconnect the power source or turn off the camcorder.

- Do not open the card compartment cover.

- Do not change the camcorder’s operating mode.

- When a USB cable is connected to the camcorder, do not disconnect the USB cable.

1Introduction

About this Manual

9

Brackets [ ] are used to

refer to onscreen buttons

and menu options you will

select and to other

onscreen messages and

displays.

These icons indicate the camcorder’s operating mode and whether a function is available in that

mode.

: Indicates whether the

camcorder is in shooting (CAMERA) or

playback (MEDIA) mode. In this example, the

function is available only in mode. For

details, refer to

Turning the Camcorder On

and Off

(A23).

: Indicates the camera mode. For

details, refer to

Setting the Camera Mode

(A24).

The > arrow is used to abbreviate menu

selections. For details on how to use the

menus, refer to

Using the Menus

(A27).

For a summary of available menu options

and settings, refer to the appendix

Menu

Options

(A115).

Supplied Accessories

10

Supplied Accessories

The following accessories are supplied with the camcorder:

PD-E1 USB Power Adapter Cable Clamp

(comes pre-attached to the

camcorder)

BP-820 Battery Pack

Microphone holder unit

(incl. screws)

Handle unit (incl. screws) Lens hood with lens barrier

Lens cap Quick Guide

Names of Parts

11

Names of Parts

1 Lens barrier switch (A34)

2SD card slot 2 (A30)

3SD card slot 3 (A30)

4u (review recording) button (A36)/

Assignable button 5 (A88)

5Lens hood (A20)

6 Focus/Zoom ring (A55, 60)

7 CUSTOM (customizable) dial (A87)

8 CUSTOM (customizable) button

(A87)

9 INFRARED switch (A 82)

10 SD card compartment cover

11 DISP (onscreen display) button

(A81)/BATT. INFO (battery

information) button (A17)

32

4

119108765

1

Left side view

Names of Parts

12

1 Built-in speaker (A102)

2MIC terminal (A71)

3 HDMI OUT terminal (A108, 109)

4 REMOTE terminal (A83)

For connecting commercially

available remote controllers.

5 SDI OUT terminal (A109)

6×(headphones) terminal (A78)

7USB terminal (A85)

8DC IN terminal (A16)

9 Cable clamp (A17)

10 Grip belt (A22)

26

73

4

5

10

1

8

9

Right side view

Names of Parts

13

1 Instant AF sensor (A63, 141)

2 AF/MF button (A60)/

Assignable button 1 (A88)

3 PRE REC (pre-recording) button

(A80)/

Assignable button 2 (A88)

4LCD touch screen (A20)

5 Focus/Zoom ring switch (A55, 60)

6 Viewfinder (A21)

7 Dioptric adjustment lever (A21)

8 Joystick/SET button (A24)

9Strap mount (A22)

10 Assignable button 3 (A88)

11 Assignable button 4 (A88)

12 Battery attachment unit (A16)

13 START/STOP button (A34)

14 MENU button (A27)

15 Serial number

1

45

6

7

8

9

14

15

13121110

3

2

Front view

Back view

Names of Parts

14

1 Power switch (A23)

2 POWER / CHG (battery charging)

indicator (A16)

3 Built-in stereo microphone

(A71)

4 Accessory shoe

5 Camera mode switch (A24)

6 Grip zoom rocker (A56)

7 ACCESS indicator (A34)

8 Handle unit mount (A19)

9 Lens hood mount index mark

10 Tripod socket

For mounting the camcorder on a

tripod with a mounting screw 6.2 mm

(0.24 in.) or shorter (A138).

11 BATTERY RELEASE switch (A17)

12 Eye cup (A21)

3

4

5

6

7

8

1

2

9

10

11

12

Top view Bottom view

Names of Parts

15

Handle unit

1 Microphone holder unit (A71)

2 Microphone lock screw (A71)

3 Accessory shoe

4 Handle zoom rocker (A56)

5START/STOP lock (C) lever (A35)

6 START/STOP button (A34)

7 Sensitivity selection switches for

INPUT 1 and INPUT 2 (A74)

8 INPUT terminal ON/OFF switch

(A75)

9 Audio level switches for CH1 and

CH2 (A75)

10 Audio level dials for CH1 and CH2

(A75)

11 Microphone cable clamp (A73)

12 INPUT 1 and INPUT 2 terminals

(collectively referred to as "INPUT

terminals") (A74)

13 Infrared light (A82)

14 Tally lamp (A34)

15 Handle unit front screw (A19)

16 Handle unit rear screws (A19)

23 4 5 6 7 8 9 10

161514131211

1

Charging the Battery Pack

16

Preparations

Charging the Battery Pack

The camcorder can be powered with a battery pack or directly using the PD-E1 USB Power Adapter.

1 Connect the USB power adapter to the camcorder

and plug the power cord into a power outlet.

2 Attach the battery pack to the camcorder.

• Press the battery pack softly into the battery attachment

unit and slide it forward until it clicks in place.

3 Charging will start when the camcorder is turned off.

• If the camcorder was on, the green POWER/CHG indicator

will go out when you turn off the camcorder. After a

moment, the POWER/CHG indicator will turn on in red

(battery pack charging). The red POWER/CHG indicator will

go out when the battery pack is fully charged.

• If the indicator flashes, refer to

Troubleshooting

(A132).

DC IN terminal

POWER/CHG (battery charging) indicator

2Preparations

Charging the Battery Pack

17

To remove the battery pack

1 Slide the BATTERY RELEASE switch in the direction of the

arrow and hold it pressed down (햲).

2 Slide the battery pack and then pull it out (햳).

Checking the Remaining Battery Charge

With the camcorder turned off, press the BATT. INFO button to display for about 5 seconds a screen

showing the approximate battery charge level. Note that if the battery charge is too low, the battery

information screen may not appear.

Using a Power Outlet

You can power the camcorder directly from a power outlet

using the USB power adapter.

1 Plug the USB power adapter into a power outlet.

2 Attach the cable clamp to the grip belt and use it to

secure the cable.

• The ferrite core should be placed between the USB plug

and the cable clamp.

3 Connect the USB plug to the DC IN terminal.

• [DC IN] will be displayed when you turn on the

camcorder.

BATTERY

RELEASE

switch

햲

햳

햴

Charging the Battery Pack

18

IMPORTANT

• Do not connect to the USB power adapter any electrical equipment that is not expressly

recommended for use with this camcorder.

• Turn off the camcorder before connecting or disconnecting the USB power adapter. After you turn

off the camcorder, important data is updated on the SD card. Be sure to wait until the green

POWER/CHG indicator goes out.

• When using the USB power adapter, do not fix it permanently to one place as this may cause a

malfunction.

• To prevent equipment breakdowns and excessive heating, do not connect the USB power adapter

to voltage converters for overseas travels or special power sources such as those on aircraft and

ships, DC-AC inverters, etc.

NOTES

• We recommend charging the battery pack in temperatures between 10 °C and 30 °C (50 °F and

86 °F). If either the ambient temperature or the battery pack’s temperature is outside the range of

approx. 0 °C to 40 °C (32 °F to 104 °F), charging will not start.

• The battery pack will be charged only when the camcorder is off.

• If the power supply was disconnected while charging a battery pack, make sure the POWER/CHG

indicator has gone out before restoring the power supply.

• If remaining battery time is an issue, you can power the camcorder using the USB power adapter so

the battery pack will not be consumed.

• While recording, it is recommended to attach a battery pack to the camcorder even when the USB

power adapter is connected. This will prevent the camcorder from turning off in case of a power

outage or an accidental disconnection of the cable.

• Charged battery packs continue to discharge naturally. Therefore, charge them on the day of use, or

the day before, to ensure a full charge.

• The first time you use a battery pack, fully charge it and then use the camcorder until the battery

pack is completely depleted. Doing so will ensure that the remaining recording time will be displayed

accurately.

• The camcorder's power consumption may vary depending on the usage conditions. When

recording, it is recommended to prepare a battery charge level that allows for a longer recording

time than planned (2 to 3 times).

• For handling precautions regarding the battery pack, refer to

Safety Instructions and Handling

Precautions

(A137).

• For charging times and approximate usage times, refer to

Reference Tables

(A149).

Preparing the Camcorder

19

Preparing the Camcorder

This section covers the basic preparations for the camcorder such as attaching the supplied handle

unit and lens hood, and adjusting the viewfinder and LCD screen.

IMPORTANT

• Be careful not to drop the camcorder when attaching, removing or adjusting the various

accessories. Using a table or other stable surface is recommended.

Attaching the Microphone Holder Unit

Use the supplied screws to attach the microphone holder unit to

the handle unit.

Attaching the Handle Unit

1 Turn off the camcorder and make sure the POWER/CHG indicator has gone out (A23).

2 Slide the front of the handle unit into the accessory

shoe, as shown in the illustration. Then, slide the handle

unit forward all the way.

• Make sure the front and rear screws are raised when you

slide the handle unit.

3 Turn the front screw and two rear screws to secure the

handle unit.

NOTES

• The camcorder is functional even if you remove the handle

unit. However, some audio options (A71), the infrared light

(A82) and tally lamp will not be available.

Preparing the Camcorder

20

Using the Lens Hood

While recording, the supplied lens hood with lens barrier is

effective for reducing stray light that can be the cause of lens

flare and ghost images. Additionally, closing the lens barrier

can help prevent fingerprints and dirt accumulation on the

lens.

1 Remove the lens cap.

2 Align the mark on the lens hood with the lens hood

mount index mark on the bottom of the camcorder

(햲), and then turn the lens hood clockwise until it

stops with a click (햳).

• Be careful not to deform the lens hood.

• Make sure that the lens hood is aligned with the thread.

• To remove the lens hood, turn it counterclockwise.

NOTES

About the lens cap:

• Use the supplied lens cap when carrying the camcorder or storing it after use.

• Note that the lens cap and the lens hood with lens barrier cannot be used simultaneously.

Adjusting the LCD Screen

Open the LCD panel 90 degrees.

• You can rotate the panel downward or toward the lens.

NOTES

• You can adjust the brightness and the backlight level of the LCD screen with the > [£

Display Setup] > [LCD Brightness] or [LCD Backlight] setting respectively. Also, you can hold the

DISP button pressed down for more than 2 seconds to open the [LCD Backlight] setup menu.

• Adjusting the brightness does not affect the brightness of recordings.

• Using a brighter LCD backlight setting will shorten the effective usage time of the battery pack.

Subject can monitor the LCD screen

La pagina sta caricando ...

Canon XA60 Manuale utente

Canon XA60 Manuale utente

in altre lingue

Documenti correlati

Altri documenti