Motorola TX500 Manuale utente

Motorola Mobility, Inc. and the Stylized M Logo are trademarks or registered

trademarks of Motorola Mobility, Inc. Trademark Holdings, LLC. All other

product or service names are the property of their respective owners.

The Bluetooth trademark and logos are owned by the Bluetooth SIG, Inc.

and any use of such marks by Motorola Mobility, Inc. is under license.

68014301075

motorola.com

MOTOROLA TX500

English

1

Figure 1

1

2

3

4

ONOFF

2

Figure 2

Figure 3

sun visor

3

English

4

Congratulations

The MOTOROLA TX500 car speakerphone delivers hands-free conversation

in a sleek design. The speakerphone is perfect for receiving and making calls

wirelessly via Bluetooth

®

from your phone.

• Drive safely with wireless control of phone calls

• Simultaneously connect with two phones

• Hear voice prompts for calls, battery level, and other functions

The voice prompts are only in English.

Your speakerphone

See ﬁgure 1 on page 1.

Take a moment to familiarize yourself with your new hands-free speakerphone.

Mute button

Volume up

Volume down

Call button/Status light

1 Speaker

2 Microphone

3 Power switch

4 Micro-USB charging connector

English

5

Congratulations

The MOTOROLA TX500 car speakerphone delivers hands-free conversation

in a sleek design. The speakerphone is perfect for receiving and making calls

wirelessly via Bluetooth

®

from your phone.

• Drive safely with wireless control of phone calls

• Simultaneously connect with two phones

• Hear voice prompts for calls, battery level, and other functions

The voice prompts are only in English.

Your speakerphone

See ﬁgure 1 on page 1.

Take a moment to familiarize yourself with your new hands-free speakerphone.

Mute button

Volume up

Volume down

Call button/Status light

1 Speaker

2 Microphone

3 Power switch

4 Micro-USB charging connector

A few essentials to know

Turn it on & off

See ﬁgure 1 on page 1.

Install it

See ﬁgure 2 on page 2.

Change settings

Turn voice prompts on & off

With the speakerphone turned on and not on a call, press and hold either

Volume button and the Call button until you hear “voice instructions on” or

“voice instructions off”.

Note: The voice prompts are only in English.

Reset

Caution: This action erases all pairing information stored in your speakerphone.

With your speakerphone turned on, press and hold

, and

buttons until the mute and status lights begin ﬂashing.

1 Press and hold

, , and buttons until the lights turn off.

2 Slide Power switch to OFF then ON to restart your speakerphone.

English

6

Check battery level

Press both Volume buttons while not on a call.

Status light Voice prompts

Red “battery is low”

purple “battery is medium”

blue “battery is high”

To save battery power, turn off the speakerphone when not using it for an

extended time.

Charge it

See ﬁgure 3 on page 2.

You can use your speakerphone while unplugged or plugged into the charger.

Battery Charge Status

Red, Purple = charging

Blue= fully charged

Note: Your battery is designed to last the life of your product. It should only

be removed by a recycling facility. Any attempt to remove or replace your

battery will damage your speakerphone.

English

7

Pair & connect

Note: The voice prompts are only in English.

Pair & connect with your phone

1 Turn off any Bluetooth devices previously paired with your speakerphone.

2 Turn on the Bluetooth feature on your phone.

3 Turn on your speakerphone

The status light becomes steady blue to indicate the speakerphone is in

discoverable mode and you hear “ready to pair”.

4 Follow the voice prompts to connect your phone to your speakerphone.

Note: If prompted for the passkey, enter 0000.

When your speakerphone successfully pairs with your phone, the status

light ﬂashes in blue and purple and you hear “phone 1 connected”.

For daily use, make sure your speakerphone is turned on, and your phone’s

Bluetooth feature is on. Your speakerphone and phone will connect

automatically.

English

8

Pair & connect a second phone

1 Turn off the ﬁrst phone and any other Bluetooth devices previously paired

with your speakerphone.

2 Turn your speakerphone off.

3 Turn on the Bluetooth feature on your phone.

4 Turn on your speakerphone.

The status light becomes steady in blue and you hear “ready to pair”.

5 Follow the voice prompts to connect your phone to your speakerphone.

Note: If prompted for the passkey, enter 0000.

When your speakerphone successfully pairs with your phone, the status

light ﬂashes in blue and purple and you hear “phone 2 connected”.

To connect both phones, turn them on and then turn your speakerphone off

and on. When you hear “phone 1 connected”, and “phone 2 connected”,

your speakerphone is ready to go.

Test your connection

Slide the speakerphone onto your visor and make a call from your phone. You

will hear ringing on the speakerphone.

English

9

Calls

Note: Some features are phone/network dependent.

Function Action

Answer call Press

.

Ignore call Press and hold

or until you

hear a tone.

End a call Press

. If a call is on hold, it is

resumed.

Redial last call Press and hold

until you hear a tone

and follow prompts.

Mute or un-mute a call Press

and you hear “mute on” or

“mute off”. The mute light is solid red

while muted.

Answer second incoming call Press

. Current call is placed on hold.

Reject second incoming call Press

or .

Make a voice dial call Press

and follow prompts.

English

10

Status light

Status light Status

3 blue ﬂashes Powering on

Steady blue In pairing/connect mode

Rapid blue/purple ﬂashes Connected to your phone

Quick blue ﬂash Receiving a call on phone 1, or making a call

on either phone

Quick purple ﬂash Receiving a call on phone 2

Slow blue pulse On a call

Slow blue ﬂash In standby (not on a call—connected to one

phone)

Slow purple ﬂash In standby (not on a call—connected to two

phones)

Slow red ﬂash Idle (not connected to a phone)

Steady red (status light) Trying to connect to your phone

Steady red (mute light) Muted

Slow red pulse In a low battery state

Note: The status light stops ﬂashing to conserve power after 20 minutes on a

call or of inactivity, but the speakerphone remains on.

English

11

Problems?

My speakerphone will not enter pairing mode

Make sure that any devices previously paired with the speakerphone are

turned off. If the status light is not steady in blue, ﬁrst turn off the other

device, then turn the speakerphone off and on. The status light becomes

steady in blue and you hear “ready to pair”.

My phone doesn’t ﬁnd my speakerphone when searching

Make sure the status light on your speakerphone is steady in blue when your

phone is searching for devices. If not, reset the speakerphone to factory

condition. The speakerphone resets and you hear “ready to pair” and see

the status light steady in blue.

My speakerphone worked before but now it’s not working

Make sure your phone is on and the Bluetooth feature is turned on in

your phone. If the Bluetooth feature was turned off or was turned on only

temporarily, you may need to restart the Bluetooth feature and pair your

phone and speakerphone again.

If you have any additional questions, please call your hotline number

(0870-9010-555) or visit us at www.hellomoto.com.

English

12

European Union Directives Conformance Statement

Hereby, Motorola Mobility Inc., declares that this product is in

compliance with the essential requirements and other relevant

provisions of Directive 1999/5/EC.

You can view your product’s Declaration of Conformity (DoC) to Directive

1999/5/EC (the R&TTE Directive) at www.motorola.com/rtte.

Caring for the Environment by Recycling

When you see this symbol on a Motorola product, do not dispose of

the product with household waste.

Recycling Mobile Phones and Accessories

Do not dispose of mobile phones or electrical accessories, such as

chargers or headsets, with your household waste. In some countries or

regions, collection systems are set up to handle electrical and electronic

waste items. Contact your regional authorities for more details. If collection

systems aren’t available, return unwanted mobile phones or electrical

accessories to any Motorola Approved Service Centre in your region.

FCC Notice to Users

FCC Notice The following statement applies to all products that have

received FCC approval. Applicable products bear the FCC logo, and/or an

FCC ID in the format FCC-ID:xxxxxx on the product label.

Motorola has not approved any changes or modiﬁcations to this device by

the user. Any changes or modiﬁcations could void the user’s authority to

operate the equipment. See 47 CFR Sec. 15.21.

This device complies with part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation. See 47 CFR Sec.

15.19(3).

English

13

European Union Directives Conformance Statement

Hereby, Motorola Mobility Inc., declares that this product is in

compliance with the essential requirements and other relevant

provisions of Directive 1999/5/EC.

You can view your product’s Declaration of Conformity (DoC) to Directive

1999/5/EC (the R&TTE Directive) at www.motorola.com/rtte.

Caring for the Environment by Recycling

When you see this symbol on a Motorola product, do not dispose of

the product with household waste.

Recycling Mobile Phones and Accessories

Do not dispose of mobile phones or electrical accessories, such as

chargers or headsets, with your household waste. In some countries or

regions, collection systems are set up to handle electrical and electronic

waste items. Contact your regional authorities for more details. If collection

systems aren’t available, return unwanted mobile phones or electrical

accessories to any Motorola Approved Service Centre in your region.

FCC Notice to Users

FCC Notice The following statement applies to all products that have

received FCC approval. Applicable products bear the FCC logo, and/or an

FCC ID in the format FCC-ID:xxxxxx on the product label.

Motorola has not approved any changes or modiﬁcations to this device by

the user. Any changes or modiﬁcations could void the user’s authority to

operate the equipment. See 47 CFR Sec. 15.21.

This device complies with part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation. See 47 CFR Sec.

15.19(3).

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment to an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Approved Accessories

Use of accessories not approved by Motorola, including but not limited to

batteries, antennas, and convertible covers, may cause your mobile device

to exceed RF energy exposure guidelines and may void your mobile device’s

warranty.

Motorola recommends that you always use Motorola-branded chargers.

Motorola devices are designed to work with Motorola chargers.

For approved Motorola accessories, visit our Web site at: www.motorola.com

Use & safety for battery-powered accessories

Your battery is designed to last the life of the product. It should only be

removed by a recycling facility. ANY ATTEMPT TO REMOVE OR REPLACE

YOUR BATTERY WILL DAMAGE THE PRODUCT.

• Battery life may temporarily shorten in low-temperature conditions (-10°C

for storage/use below 0°C for recharge) or permanently reduce in high

temperature conditions (above 60°C for storage/use or above 45°C for

recharge).

English

14

• Do not let your mobile device get wet.

• Do not store your accessory in a parked car or direct sunlight.

WARNING: MAY EXPLODE IF DISPOSED OF IN FIRE.

Driving Precautions

Check and obey the laws and regulations on the use of mobile devices in the

area where you drive. The use of wireless devices and their accessories in

your area may be prohibited or restricted. The use of wireless phones while

driving may cause distraction. Discontinue a call if you can’t concentrate on

driving. When using your mobile device while driving, please:

• Give full attention to driving and to the road.

• Use your hands-free solution to perform hands-free calls.

• Pull off the road and park before making or answering a call if driving

conditions so require.

Caution about high volume usage

Warning: Exposure to loud noise from any source for extended periods of

time may temporarily or permanently affect your hearing. The louder the

volume sound level, the less time is required before your hearing could be

affected. Hearing damage from loud noise is sometimes undetectable at ﬁrst

and can have a cumulative effect. To protect your hearing:

• Start your volume control at a low setting and use as low a volume as

possible.

• Limit the amount of time you use headsets or headphones at high volume.

• Where possible, use your headset in a quiet environment with low

background noise.

• Avoid turning up the volume to block out noisy surrounding.

• Turn the volume down if you can’t hear people speaking near you.

If you experience hearing discomfort, including the sensation of pressure or

fullness in your ears, ringing in your ears, or mufﬂed speech, you should stop

listening to the device through your headset or headphones and have your

hearing checked by your doctor.

Français

15

Félicitations

Votre solution mains-libres de voiture MOTOROLA TX500 allie fonctionnalités

mains-libres et esthétique. Ce haut-parleur est idéal pour passer et recevoir

des appels via Bluetooth® depuis votre téléphone.

• Gestion des appels en mains-libres

• Possibilité de connexion simultanée à deux téléphones

• Instructions vocales pour les appels, le niveau de charge de la batterie et

bien d’autres fonctions encore.

Les instructions vocales sont uniquement disponibles en anglais.

Votre haut-parleur

Voir ﬁgure 1, page 1.

Prenez le temps de vous familiariser avec votre nouveau haut-parleur

mains-libres.

Touche coupure micro

Touche d’augmentation du volume

Touche de réduction du volume

Touche d’appel/Témoin d’état

1 Haut-parleur

2 Microphone

3 Bouton marche/arrêt

4 Port de charge micro-USB

Français

16

Informations indispensables

Mise sous/hors tension de votre haut-parleur

Voir ﬁgure 1, page 1.

Installation

Voir ﬁgure 2, page 2.

Modiﬁcation des paramètres

Activation/désactivation des instructions vocales

Hors appel, allumez votre haut-parleur et maintenez l’une des deux touches

de volume et la touche d’appel enfoncées, jusqu’à ce que vous entendiez

« voice instructions on » ou « voice instruction off ».

Remarque : les instructions vocales sont uniquement disponibles en anglais.

Réinitialisation

Attention : cette opération entraîne la suppression de toutes les informations

de couplage enregistrées sur votre haut-parleur.

Allumez votre haut-parleur, maintenez les touches

, et

enfoncées jusqu’à ce que les témoins de coupure micro et d’état

commencent à clignoter..

1 Maintenez les touches

, et enfoncées jusqu’à ce que les

témoins s’éteignent.

2 Faites glisser le bouton marche/arrêt sur OFF, puis sur ON pour redémarrer

votre haut-parleur.

Français

17

Informations indispensables

Mise sous/hors tension de votre haut-parleur

Voir ﬁgure 1, page 1.

Installation

Voir ﬁgure 2, page 2.

Modiﬁcation des paramètres

Activation/désactivation des instructions vocales

Hors appel, allumez votre haut-parleur et maintenez l’une des deux touches

de volume et la touche d’appel enfoncées, jusqu’à ce que vous entendiez

« voice instructions on » ou « voice instruction off ».

Remarque : les instructions vocales sont uniquement disponibles en anglais.

Réinitialisation

Attention : cette opération entraîne la suppression de toutes les informations

de couplage enregistrées sur votre haut-parleur.

Allumez votre haut-parleur, maintenez les touches

, et

enfoncées jusqu’à ce que les témoins de coupure micro et d’état

commencent à clignoter..

1 Maintenez les touches

, et enfoncées jusqu’à ce que les

témoins s’éteignent.

2 Faites glisser le bouton marche/arrêt sur OFF, puis sur ON pour redémarrer

votre haut-parleur.

Vériﬁcation du niveau de charge de la batterie

Hors appel, appuyez sur les deux touches de volume.

Témoin d’état Instructions vocales

Rouge « battery is low »

Violet « battery is medium »

Bleu « battery is high »

Pour économiser la batterie, éteignez le haut-parleur lorsque vous ne

l’utilisez pas pendant une période prolongée.

Charge

Voir ﬁgure 3, page 2.

Vous pouvez utiliser votre haut-parleur, qu’il soit branché ou non au

chargeur.

État de charge de la batterie

Rouge, violet = charge en cours

Bleu = charge terminée

Remarque : la batterie de votre appareil a été conçue pour couvrir la durée

de vie de celui-ci. Seul un centre de recyclage est autorisé à extraire la

batterie. Toute tentative d’extraction ou de remplacement de la batterie

endommagera le produit.

La pagina sta caricando ...

Motorola TX500 Manuale utente

Motorola TX500 Manuale utente

in altre lingue

Documenti correlati

Altri documenti