<KX-DT346>
Document Version 2009-03
Thank you for purchasing a Digital Proprietary Telephone (DPT).
Please read this manual carefully before using this product and
save this manual for future use. For more details, please refer to the
manuals of the PBX.
Accessories (included)
*1
*1
For extra orders for the accessories, call toll-free: 1-800-332-5368.
*2
This telephone comes with the wall mounting adaptor already attached.
To remove the adaptor, refer to step 1 on page 17.
Handset: 1 Handset Cord: 1 Wall Mounting
Adaptor
*2
: 1
Screws for wall: 2 Telephone Line
Cord: 1
Quick Reference Guide
Model No.
KX-DT333/KX-DT343/KX-DT346
Digital Proprietary Telephone
2 Document Version 2009-03
This unit supports the following optional devices and features:
Q: Available
*1
The availability of the Bluetooth Module depends on the software version
of the connected PBX. Consult your dealer for more details.
*2
For information on connecting, refer to the each included manual.
*3
When connecting DPTs via Digital XDP, this optional device cannot be
used.
Trademark:
The Bluetooth
®
word mark and logos are owned by the Bluetooth SIG, Inc.
and any use of such marks by Panasonic Corporation is under license.
KX-DT333 KX-DT343 KX-DT346
Features
Display 3-Line 3-Line 6-Line
Flexible Buttons 24 24 24
LCD Backlight QQ
Options
KX-NT303 Add-on 12 Key Module QQ
KX-NT307 (PSLP1528) Bluetooth
®
Module
*1
*2
*3
QQ
KX-DT301 USB Module
*3
QQ
KX-DT390 DSS Console (with 60
keys)
*2
QQQ
Location of Controls
Document Version 2009-03 3
Location of Controls
A LCD (Liquid Crystal
Display)
B PAUSE: Used to insert a
pause when storing a
telephone number. This
button is also used for
programming this unit.
C
FWD/DND (Call Forwarding/
Do Not Disturb):
Used to set
Call Forwarding or Do Not
Disturb on your extension.
D CONF (Conference): Used
to establish a multiple party
conversation.
E INTERCOM: Used to make
or receive intercom calls.
F AUTO ANS (Auto Answer)/
MUTE: Used to receive an
incoming call in hands-free
mode or mute the
microphone/handset during a
conversation.
G AUTO DIAL/STORE: Used
for System/Personal Speed
Dialing or storing program
changes.
R
U
Q
LMN
G
H
I
K
A
E
F
B
D
J
S
V
O
P
<KX-DT346>
T
C
Location of Controls
4 Document Version 2009-03
H TRANSFER: Used to
transfer a call to another
party.
I REDIAL: Used to redial the
last dialed number.
J MESSAGE: Used to leave a
message waiting indication
or call back the party who left
the message waiting
indication.
K Headset Jack
L FLASH/RECALL: Used to
disconnect the current call
and make another call
without hanging up.
M HOLD: Used to place a call
on hold.
N SP-PHONE
(Speakerphone): Used for
performing hands-free
operations.
O ENTER: Used to assign the
selected item.
P Microphone: Used for
hands-free conversations.
Q Navigator Key: Used to
adjust the volume and the
display contrast or select
desired items.
R CANCEL: Used to cancel
the selected item.
S Flexible Buttons: Used to
seize a CO line or perform a
feature that has been
assigned to the key.
T LCD Panel: Can be adjusted
to the desired angle.
U Soft Buttons (S1-S4): S1-
S4 (located from left to right)
are used to select the item
displayed on the bottom line
of the display.
V Message/Ringer Lamp:
When you receive an
intercom call, the lamp
flashes green, and on an
outside call, the lamp flashes
red. When someone has left
you a message, the lamp
stays on red.
Settings
Document Version 2009-03 5
Settings
*1
If you hear your own voice through the handset or headset, decrease the
volume.
*2
For KX-DT343/KX-DT346 only.
Speaker volume
While in a hands-free
conversation
Press Up to increase
or Down to decrease
the volume.
Handset/Headset
volume
*1
While using the handset or
headset
Ringer volume
While on-hook or receiving a call
LCD Contrast While on-hook
Ring Tone
LCD Backlight
*2
While on-hook
PAUSE PAUSE
OR
Press 2 times.
OR
(CO)
OR
PAUSE
STORE
INTERCOM
AUTO DIAL
PAUSE
Automatic
Always ON
Always OFF
PAUSE
PAUSE
OR
STORE
AUTO DIAL
OR
STORE
AUTO DIAL
Features List
6 Document Version 2009-03
Features Lis t
Icon Meanings
= Flexible button = Off-hook = On-hook
= Feature number = Talk = Confirmation Tone
Making Calls
Calling
To an extension To an outside party
Redial
Quick Dialing
One-touch Dialing
To store
To dial
Personal Speed Dialing
To store
To dial
(
CO
)
C. Tone
extension no.
(
CO
)
outside phone no.
REDIAL
quick dialing no.
(CO)
desired no.
*
(max. 32 digits)
* Enter CO line access number
before outside phone number.
STORE
AUTO DIAL
PAUSE PAUSE
assigned as a
One-touch Dialing button
(One-touch Dialing)
personal speed
dialing no. (2 digits)
desired phone no.*
(max. 32 digits)
* Enter CO line access number
before outside phone number.
C. Tone
STORE
AUTO DIAL
personal speed
dialing no. (2 digits)
Features List
Document Version 2009-03 7
During a Conversation
Useful Features
System Speed Dialing
To dial
Doorphone Call
Call Hold
To hold To retrieve a call at the holding extension
To retrieve an outside call from another extension
Call Transfer
Multiple Party Conversation
To add other parties during a conversation (i.e., conference)
To leave a conference
STORE
AUTO DIAL
system speed
dialing no. (3 digits)
doorphone no. (2 digits)
C. Tone
C. Tone
HOLD
(CO)
/
INTERCOM
(CO)
C. Tone
outside
phone no.
To an extension
To an outside
party
extension no.
(CO)
TRANSFER
desired
phone no.
Talk to the
new party.
Talk with
multiple parties.
C. Tone C. Tone
CONF CONF
C. Tone
CONF
Features List
8 Document Version 2009-03
Setting the Telephone According to Your Needs
Before Leaving Your Desk
Do Not Disturb
Timed Reminder
To set
To cancel To stop or answer the ring back
Call Forwarding
Both Calls
Outside Calls
Intercom Calls
Set
Cancel
C. Tone
AM
PM
24 H
12 H
hour/minute
(4 digits)
hour/minute
(4 digits)
Once
Daily
C. Tone
C. Tone
/
INTERCOM
Busy
Cancel
No answer
Busy/
No answer
CO line
access no.
All calls
extension no.
outside
phone no.
Both Calls
Outside Calls
Intercom Calls
C. Tone
OR
Features List
Document Version 2009-03 9
Making Use of the Voice Mail Service
Listening to a message
From your own extension
* If you have no password, you can skip the
last step.
Note:
VPS = Voice Processing System
From someone else’s extension
* If you have no password, you can skip the
last step.
Leaving a message
Mailbox Password*
VPS extension no.
End Call
KX-TVA series
KX-TVS series
Listen to Message
Deliver Message
Mailbox Management
Automated Attendant
Message Notification
Other Features
End Call
Listen to Message
Deliver Message
Check Mailbox Distribution
Automated Attendant
Mailbox Management
Other Features
mailbox no.
VPS extension no.
Mailbox Password*
mailbox no.
From your own extension
From someone else’s extension
* If you have no password, you can skip the last step.
Enter the desired mailbox number
Leave
a message
To send the message immediately
To set the delivery time
Follow the guidance
(KX-TVA series)
(KX-TVS series)
VPS extension no.
Mailbox Password*
Mailbox Password*
Features List
10 Document Version 2009-03
• Consult your dealer for more details regarding feature numbers.
• It is possible to assign flexible buttons as feature buttons.
• Control panel/button names and descriptions can be found in "Location
of Controls" on page 3.
Accessing Features Using the Display
Using the LCD Display
It is possible to access the following directories, logs, and menus by
pressing left or right on the Navigator Key while this unit is idle:
Entering Characters
You can enter alphabetic characters and digits using the dialing
buttons. Pressing a dialing button repeatedly displays different
characters, as shown in the following tables. While entering
characters, you can move the cursor with the left and right
Navigator keys and delete characters with the TRANSFER button.
To toggle between Table 1 and Table 2, press the Soft button (S1)
at any time while entering characters. For a list of available
characters, refer to the next page.
During playback
Repeat Voice Guidance
Exit
Incoming Call Log
Outgoing Call Log
Personal Speed Dialing Directory
System Speed Dialing Directory
Extension Number Directory
Feature Access
Accessing Features Using the Display
Document Version 2009-03 11
Accessing Features Using the Display
Table 1 (Standard mode)
Table 2 (Option mode)
!
A
D
G
J
M
P
T
W
(space)
$
?1"
BCabc2
EFdef3
HIghi4
KLjkl5
NOmn 6o
QRSpqrs7
UVt 8uv
XYZwxyz
9
.
,
:
;
0
%& () #
/+—=<>
£
’
Times
Buttons
@
Times
Buttons
!
A
D
G
J
M
P
T
W
$
?ä"
BCabcÀ
EFdefÐ
HIghiÌ
KLjkl5
NOmn Ño
QRSpqrs
UVtuv
XYZwxyz
ý 9
.
0
%& () #£
ö1ü
/+—=<>
10 11 12 13 14 15
ÁÂÃÄÅÆÇ2
ÈÉÊË3
ÍÎÏ4
ÒÓÔÕÖØŒ6
ß7
ÙÚÛÜ8
,
:
;
’
(space)
Š
Z
@
Operation Board Angle Adjustment
12 Document Version 2009-03
Operation Board Angle Adjus tment
The angle of the operation board can be set to one
of eight angles (level 1 = 0°, level 8 = 45°).
CAUTION:
Hold the operation board until the operation board is secured at the
desired angle. Make sure you do not pinch your fingers when
raising or lowering the operation board.
To raise:
Gently lift the operation board one level at a
time.
To lower:
Raise the operation board to level 8. Next,
with one hand on the base of the unit, lift the
operation board again to release the latch,
then slowly push the operation board down
to level 1. If the operation board cannot be
lowered to level 1, repeat this step.
Locking the Handset Hook
Pull down the handset hook until it locks to prevent
the handset from falling off the handset cradle
when the unit is mounted to a wall or set at a high
angle. To temporarily place the handset down
during a conversation, hook it over the top edge of
the unit as shown.
1
2
3
4
5
6
7
8
Connection
Document Version 2009-03 13
Connection
• Consult your dealer for more details about XDP and Digital XDP.
CAUTION:
When connecting a headset
• Ensure that the headset cord is wound around the hook to prevent
damage to the connector.
When connecting cords
• Ensure the cords are inserted in the grooves, and are clamped to
prevent damage to the connectors.
<Back view>
Headset
Recommended:
KX-TCA86, KX-TCA91,
KX-TCA92
Do not use a KX-T7090 headset.
Clamp
Connect to a PBX.
Connect to:
a digital proprietary telephone
— Digital XDP connection
a single line telephone
— XDP or parallel connection
The telephone line cord
(included)
Installing KX-DT301/KX-NT303
14 Document Version 2009-03
Installing KX-DT301/KX-NT303
1.
Open the cover.
2. Attach the KX-NT303 to your
unit with the screws (included
with KX-NT303).
3. Plug the flat cable into the
connector (A), then bend the
cable slightly as shown (B).
4. Close the cover.
CAUTION:
• To prevent damage to the telephone, be sure to unplug the
extension line before you set up or remove the KX-DT301 (USB
Module) or the KX-NT303 (Add-on 12 Key Module).
• Connect the KX-NT303 first when installing both the KX-DT301
and the KX-NT303.
KX-NT303
The Add-on 12 Key Module allows 12
additional flexible buttons to be added to this
unit. These buttons are used to seize a CO
line, make a call using One-touch Dialing, or
perform a feature that has been assigned to
the key.
<with a KX-DT346>
Installing KX-DT301/KX-NT303
Document Version 2009-03 15
1.
Open the cover.
2. Plug the flat cable into the
connector as shown.
3. Close the cover. 4. Connect the USB cable to
the USB port.
• Ensure that the USB cable goes
through the cable guide.
• Please use a USB cable shorter
than 3 m (9 ft 10 in).
KX-DT301
The USB Module can be connected between the DPT and the
personal computer through USB interface to implement personal
CTI (Computer Telephony Integration).
Connect to a PC
Installing KX-DT301/KX-NT303
16 Document Version 2009-03
5. Insert the protrusions on the
KX-DT301 into the 2 holes in
the unit.
6. Attach the KX-DT301 to your
unit with the screws (included
with KX-DT301).
7. Install the USB driver. Refer
to Installation Manual on the
CD-ROM included with KX-
DT301.
Wall Mounting
Document Version 2009-03 17
Wall Mounting
• For information on locking the handset hook, refer to page 12.
1.
Remove the wall mounting
adaptor from the unit as shown.
2. Set the operation board to level
1, then connect and secure the
telephone line cords.
• The cords can also be run from
the top of the unit (page 13).
3. Attach the wall mounting
adaptor as shown.
• Make sure the cords are not
pinched by the wall mounting
adaptor. When running the cords
from the top of the unit, look
through the opening in the wall
mounting adaptor
(A) to
confirm that the cords are not
being pinched.
4.
Drive the 2 screws (included) into
the wall either 83 mm (3-1/4 in) or
100 mm (3-15/16 in) apart, and
mount the unit on the wall.
• You can find a wall mounting
template on page 23.
• Make sure that the wall that the
unit will be attached to is strong
enough to support the unit
(approx. 1.65 kg [3.64 lb]).
• Make sure the cords are
securely fastened to the wall.
• When this unit is no longer in
use, make sure to detach it from
the wall.
Slide the wall
mounting adaptor
up to this point.
83 mm
(3-1/4 in)
100 mm
(3-15/16 in)
Washer
Drive the screw
to this point.
Important Information
18 Document Version 2009-03
Importan t Information
When using KX-DT300 series DPTs, keep the following
conditions in mind.
• If you are having problems making calls, unplug the extension line and
connect a known working telephone. If the known working telephone
operates properly, have the defective telephone repaired by an
authorized Panasonic factory service center. If the known working
telephone does not operate properly, check the PBX and the internal
extension wiring.
• Wipe the unit with a soft cloth. Do not clean the unit with abrasive
powders or with chemical agents such as benzene or thinner.
• Use only the correct Panasonic handset.
• Do not disassemble this unit. Dangerous electrical shock could result.
The unit must only be disassembled and repaired by qualified service
technicians.
• If damage to the unit exposes any internal parts, immediately disconnect
the cable or cord.
• Never attempt to insert wires, pins, etc. into the vents or other holes of
this unit.
Take special care to follow the safety suggestions listed below.
Installation
Environment
1) Do not use this unit near water, for example, near a bathtub, washbowl
or sink. Damp basements should also be avoided.
2) Keep the unit away from heating appliances and devices that generate
electrical noise, such as fluorescent lamps, motors, and televisions.
These noise sources can interfere with the performance of the unit. It
also should not be placed in rooms where the temperature is less than
5 °C (41 °F) or greater than 40 °C (104 °F).
Allow 10 cm (3-15/16 in) clearance around the unit for proper
ventilation.
Placement
1) Do not place heavy objects on top of this unit.
2) Care should be taken so that objects do not fall onto, and liquids are
not spilled into, the unit. Do not subject this unit to excessive smoke,
dust, moisture, mechanical vibration, shock, or direct sunlight.
3) Place the unit on a flat surface.
Important Information
Document Version 2009-03 19
WARNING:
TO PREVENT POSSIBLE FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE.
THIS HANDSET EARPIECE IS MAGNETIZED AND MAY RETAIN SMALL
FERROUS OBJECTS.
THE USE OF EXCESSIVE SOUND VOLUME THROUGH EARPHONES,
HEADPHONES, OR HEADSETS MAY CAUSE HEARING LOSS.
DISCONNECT THE TELEPHONE LINE CORD FROM THIS PRODUCT IF
THIS PRODUCT EMITS SMOKE, AN ABNORMAL SMELL OR MAKES
UNUSUAL NOISE. THESE CONDITIONS CAN CAUSE FIRE OR
ELECTRIC SHOCK. CONFIRM THAT SMOKE HAS STOPPED AND
CONTACT AN AUTHORIZED SERVICE CENTER.
IMPORTANT NOTICE:
• Under power failure conditions, the DPT may not operate. Please ensure
that a separate telephone, not dependent on local power, is available for
use in remote sites in case of emergency.
When you ship the product:
Carefully pack and send it prepaid, adequately insured and preferably in the
original carton. Attach a postage-paid letter, detailing the symptom to the
outside of the carton.
DO NOT send the product to the Executive or Regional Sales offices. They
are NOT equipped to make repairs.
Product service:
Panasonic factory service centers for this product are listed in the service
center directory.
Consult your authorized Panasonic dealer for detailed instructions.
Important Information
20 Document Version 2009-03
Important Safety Instructions
When using this unit, basic safety precautions, including those below,
should always be followed to reduce the risk of fire, electric shock and injury
to persons.
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on this unit.
3. Unplug this unit from the main unit before cleaning. Do not use liquid or
aerosol cleaners. Clean with a soft cloth.
4. Do not use the unit near water, for example, near a bathtub, kitchen
sink, or laundry tub, in a wet basement, or near a swimming pool.
5. Place this unit on a flat surface. Serious damage and/or injury may
result if the unit falls.
6. The unit should never be placed near or over a radiator or other heat
source.
7. Do not allow anything to rest on the extension cord. Do not locate this
unit where the cord may be stepped on or tripped on.
8. To reduce the risk of fire or electric shock, do not overload wall outlets
and extension cords.
9. Do not insert objects of any kind into this unit through openings, as they
may touch dangerous voltage points or short out parts that could result
in a risk of fire or electric shock. Never spill liquid of any kind on the unit.
10.To reduce the risk of electric shock, do not disassemble this unit. Only
qualified personnel should service this unit. Opening or removing
covers may expose you to dangerous voltages or other risks. Incorrect
reassembly can cause electric shock.
11.Unplug this unit from the main unit and have the unit serviced by
qualified service personnel in the following cases:
A. When the power supply cord or plug is damaged or frayed.
B. If liquid has been spilled on the unit.
C. If the unit has been exposed to rain or water.
D. If the unit does not operate according to this manual. Adjust only the
controls that are explained in this manual. Improper adjustment of
other controls may result in damage and may require service by a
qualified technician to restore the product to normal operation.
E. If the unit has been dropped, or damaged.
F. If the unit’s performance deteriorates.
12.Avoid using a wired telephone during an electrical storm. There is a
remote risk of electric shock from lightning.
13.Do not use a telephone in the vicinity of a gas leak to report the leak.
SAVE THESE INSTRUCTIONS
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
in altre lingue
- English: Panasonic KX-DT346UA User manual
Documenti correlati
Altri documenti
-
Marmitek 14" COLOR OBSERVATION SYSTEM Manuale utente
-
Mitel OfficeSuite 5330 Manuale utente
-
Vertical 7224D Manuale utente
-
-
Sanyo CAS-A9000 Manuale utente
-
Alcatel-Lucent IP Touch 4038 Manuale del proprietario
-
Ericsson Dialog 4187 Plus Manuale utente
-
-
VTech ErisTerminal VSP861 Manuale utente