Sony XR-CA400 Manuale utente

 2001 Sony Corporation

FM/MW/LW

Cassette Car Stereo

3-226-701-12 (1)

XR-CA400

XR-CA410

Operating Instructions

Bedienungsanleitung

Mode d’emploi

Istruzioni per l’uso

Gebruiksaanwijzing

GB

DE

IT

FR

NL

Wichtig!

Bitte nehmen Sie sich etwas Zeit, um den Geräte-Pass

vollständig auszufüllen. Wo sich dieser befindet,

entnehmen Sie bitte dem in der hinteren Umshlagseite

dieser Bedienungsanleitung.

Si dichiara che l’apparecchio è stato fabbricato in conformità all’art. 2, Comma 1 del

D.M. 28.08.1995 n. 548.

For installation and connections, see the supplied installation/connections

manual.

Zur Installation und zum Anschluß siehe die mitgelieferte Installations-/

Anschlußanleitung.

En ce qui concerne l’installation et les connexions, consulter le manuel

d’installation/connexions fourni.

Per l’installazione e i collegamenti, fare riferimento al manuale di istruzioni di

installazione/collegamenti in dotazione.

Zie voor het monteren en aansluiten van het apparaat de bijgeleverde handleiding

“Installatie en aansluitingen”.

FM/MW/LW Cassette Car Stereo

22

Welcome !

Thank you for purchasing this Sony Cassette

Player. This unit lets you enjoy a variety of

features using the following controller

accessory:

Optional accessory

Rotary commander RM-X4S

In addition to the cassette playback and radio

operations, you can expand your system by

connecting an optional CD/MD unit*

1

.

When you operate this unit or a connected

optional CD unit with the CD TEXT function,

the CD TEXT information will appear in the

display when you play a CD TEXT disc*

2

.

*

1

You can connect a CD changer, an MD changer,

a CD player, or an MD player.

*

2

A CD TEXT disc is an audio CD that includes

information such as the disc name, artist name,

and track names.

This information is recorded on the disc.

Precautions

• If your car was parked in direct sunlight

resulting in a considerable rise in

temperature inside the car, allow the unit to

cool off before operating it.

• If no power is being supplied to the unit,

check the connections first. If everything is in

order, check the fuse.

• If no sound comes from the speakers of a

two-speaker system, set the fader control to

the centre position.

• When a tape is played back for a long period,

the cassette may become warm because of

the built-in power amplifier. However, this is

not a sign of malfunction.

If you have any questions or problems

concerning your unit that are not covered in

this manual, please consult your nearest Sony

dealer.

To maintain high quality sound

If you have drink holders near your audio

equipment, be careful not to splash juice or

other soft drinks onto the car audio. Sugary

residues on this unit or cassette tapes may

contaminate the playback heads, reduce the

sound quality, or prevent sound reproduction

altogether.

Cassette cleaning kits cannot remove sugar

from the tape heads.

33

Notes on Cassettes

Cassette care

• Do not touch the tape surface of a cassette, as

any dirt or dust will contaminate the heads.

• Keep cassettes away from equipment with

built-in magnets such as speakers and

amplifiers, as erasure or distortion on the

recorded tape could occur.

• Do not expose cassettes to direct sunlight,

extremely cold temperatures, or moisture.

• Slack in the tape may cause the tape to be

caught in the machine. Before you insert the

tape, use a pencil or similar object to turn the

reel and take up any slack.

• Distorted cassettes and loose labels can cause

problems when inserting or ejecting tapes.

Remove or replace loose labels.

• The sound may become distorted while

playing the cassette. The cassette player head

should be cleaned after each 50 hours of use.

Slack

Cassettes longer than 90 minutes

The use of cassettes longer than 90 minutes is

not recommended except for long continuous

play. The tape used for these cassettes is very

thin and tends to stretch easily. Frequent

playing and stopping of these tapes may cause

them to become entangled in the cassette deck

mechanism.

44

Table of Contents

With Optional EquipmentThis Unit Only

Location of controls ................................................. 5

Getting Started

Resetting the unit ................................................ 6

Detaching the front panel .................................. 6

Setting the clock .................................................. 7

Cassette Player

Listening to a tape ............................................... 7

Playing a tape in various functions .................. 8

Radio

Memorizing stations automatically

— Best Tuning Memory (BTM) .................... 9

Memorizing only the desired stations ............. 9

Receiving the memorized stations.................... 9

RDS

Overview of the RDS function ........................ 10

Displaying the station name ............................ 10

Retuning the same programme automatically

— Alternative Frequencies (AF) ................. 11

Listening to traffic announcements ................ 12

Presetting the RDS stations with the AF and

TA data .......................................................... 13

Locating a station by programme type .......... 14

Setting the clock automatically ....................... 15

Other Functions

Labelling the rotary commander .................... 15

Using the rotary commander .......................... 16

Adjusting the sound characteristics ............... 17

Attenuating the sound ..................................... 17

Changing the sound and display settings ..... 18

Boosting the bass sound

— D-bass ....................................................... 18

Selecting the sound position

— “My Best sound Position” ..................... 19

CD/MD Unit

Playing a CD or MD ......................................... 19

Playing tracks repeatedly

— Repeat Play .............................................. 21

Playing tracks in random order

— Shuffle Play .............................................. 21

Additional Information

Maintenance....................................................... 21

Removing the unit ............................................ 22

Specifications ..................................................... 23

Troubleshooting guide ..................................... 24

55

Location of controls

Refer to the pages listed for details.

1 Volume +/– button 7, 13, 17

2 MODE (o) button

During tape playback:

Playback direction change 7, 8

During radio reception:

BAND select 9

During CD/MD playback:

CD/MD unit select 19

3 SRC (SOURCE) (TUNER/TAPE/CD/MD)

button 7, 9, 19

4 SEL (select) button 7, 15, 17, 18, 19, 20

5 Display window

6 MBP (My Best sound Position)

button 19

7 D (D-BASS) button 18

8 Z (eject) button 7

9 RELEASE (front panel release) button

6, 22

q; ATT (attenuate) button 17

qa SENS/BTM button 9, 10, 13

qs RESET button (located on the front side

of the unit behind the front panel) 6

qd AF button 11, 13

qf Number buttons 8, 9, 12, 15, 18, 20, 21

During radio reception:

Preset number select 9, 12

During tape playback:

(3) REP 8

(5) BL SKIP 8

(6) ATA 8

During CD/MD playback:

(1) DISC – 20

(2) DISC + 20

(3) REP 21

(4) SHUF 21

qg TA button 12, 13

qh PTY/MTL (programme type/Metal)

button 8, 14

qj DSPL (display mode change) button

7, 10, 19, 20

qk OFF button* 6, 7

ql SEEK/AMS +/– button

8, 9, 10, 11, 14, 20

Seek 9

Automatic Music Sensor 8, 20

Manual search 10, 20

* Warning when installing in a car

without ACC (accessory) position on

the ignition key switch

Be sure to press (OFF) on the unit for two

seconds to turn off the clock display after

turning off the engine.

When you press (OFF) momentarily, the

clock display does not turn off and this

causes battery wear.

XR-CA400/CA410

RELEASE

SENS

AF123456TA

PTY

SEEK

AMS

DSPL

BTM

MTL

AT T

SEL

MODE

SRC

OFF

D

D-BASS

MBP

DISC REP SHUF BL SKIP ATA

SOURCE

66

Attaching the front panel

Attach part A of the front panel to part B of

the unit as illustrated and push the left side

into position until it clicks.

Notes

• Be sure not to attach the front panel upside

down.

• Do not press the front panel too hard against the

unit when attaching it.

• Do not press too hard or put excessive pressure

on the display window of the front panel.

• Do not expose the front panel to direct sunlight

or heat sources such as hot air ducts, and do not

leave it in a humid place. Never leave it on the

dashboard of a car parked in direct sunlight or

where there may be a considerable rise in

temperature.

Caution alarm

If you turn the car ignition off without

removing the front panel, the caution alarm

will beep for a few seconds.

If you connect an optional power amplifier and

do not use the built-in amplifier, the beep

sound will be deactivated.

Getting Started

Resetting the unit

Before operating the unit for the first time or

after replacing the car battery, you must reset

the unit.

Remove the front panel and press the RESET

button with a pointed object, such as a

ballpoint pen.

Note

Pressing the RESET button will erase the clock

setting and some memorized functions.

Detaching the front panel

You can detach the front panel of this unit to

protect the unit from being stolen.

1 Press (OFF).

2 Press (RELEASE), then slide the front

panel a little to the left, and pull it off

towards you.

Notes

• Be sure not to drop the panel when detaching it

from the unit.

• If you detach the panel while the unit is still

turned on, the power will turn off automatically

to prevent the speakers from being damaged.

• When carrying the front panel with you, use the

supplied front panel case.

RESET button

(OFF)

(RELEASE)

A

B

77

Cassette Player

Listening to a tape

Insert a cassette.

Playback starts automatically.

If a cassette is already inserted, to start

playback, press (SRC) repeatedly until

“TAPE” appears.

The side facing up is played.

The side facing down is played.

Tip

To change the tape‘s playback direction, press

(MODE) (o).

To Press

Stop playback (OFF)

Eject the cassette Z

continue to next page t

Setting the clock

The clock uses a 24-hour digital indication.

Example: To set the clock to 10:08

1 Press (DSPL) for two seconds.

The hour indication flashes.

1 Press either side of the volume button

to set the hour.

2 Press (SEL).

The minute indication flashes.

3 Press either side of the volume button

to set the minute.

2 Press (DSPL).

The clock starts.

After the clock setting is complete, the

display returns to normal playback mode.

to go forward

to go back

to go forward

to go back

88

Fast-winding the tape

During playback, press and hold either

side of (SEEK/AMS).

To start playback during fast-forwarding or

rewinding, press (MODE) (o).

Locating a specific track

— Automatic Music Sensor (AMS)

During playback, press either side of

(SEEK/AMS) momentarily for each track

you want to skip.

You can skip up to nine tracks at one time.

Note

The AMS function may not work when:

— the blanks between tracks are shorter than

four seconds

— there is noise between tracks

— there are long sections of low volume or quiet

sections.

To locate preceding tracks

To locate succeeding tracks

SEEK

AMS

Rewind

Fast-forward

SEEK

AMS

AF123456TA

PTY

MTL

DISC REP SHUF BL SKIP ATA

Playing a tape in various

functions

You can play the tape in various functions:

•REP (Repeat Play) repeats the current track.

•BL SKIP (Blank Skip) skips blanks longer

than eight seconds.

•ATA (Automatic Tuner Activation) turns on

the tuner automatically when fast-winding

the tape.

•MTL (Metal) lets you play a metal or CrO2

tape.

During tape playback, press the desired

function button repeatedly until “ON” in

the display appears.

Function buttons

(3): REP

(5): BL SKIP

(6): ATA

(PTY): MTL

Example: ATA function

ATA function starts.

To return to normal playback function, select

“OFF.”

99

Radio

Memorizing stations

automatically

— Best Tuning Memory (BTM)

The unit selects the stations with the strongest

signals and memorizes them in the order of

their frequencies. You can store up to 6 stations

on each band (FM1, FM2, FM3, MW, and LW).

Caution

When tuning in stations while driving, use

Best Tuning Memory to prevent accidents.

1 Press (SRC) repeatedly to select the

tuner.

Each time you press (SRC), the source

changes as follows:

B TUNER B CD*

1

TAPE*

2

b MD*

1

b

*

1

If the corresponding optional equipment is

not connected, this item will not appear .

*

2

If a tape is not inserted, this item will not

appear.

2 Press (MODE) repeatedly to select the

band.

Each time you press (MODE), the band

changes as follows:

B FM1 B FM2 B FM3 B MW B LW

3 Press (SENS) (BTM) for two seconds.

The unit stores stations in the order of their

frequencies on the number buttons.

A beep sounds when the setting is stored.

Notes

• The unit does not store stations with weak

signals. If only a few stations can be received,

some number buttons will retain their former

setting.

• When a number is indicated in the display, the

unit starts storing stations from the one currently

displayed.

Memorizing only the

desired stations

You can preset up to 18 FM stations (6 each for

FM1, 2, and 3), up to 6 MW stations, and up to

6 LW stations in the order of your choice.

1 Press (SRC) repeatedly to select the

tuner.

2 Press (MODE) repeatedly to select the

band.

3 Press either side of (SEEK/AMS) to tune

in the station that you want to store on

the number button.

4 Press the desired number button ((1) to

(6)) until “MEM” appears.

The number button indication appears in

the display.

Note

If you try to store another station on the same

number button, the previously stored station will

be erased.

Receiving the memorized

stations

1 Press (SRC) repeatedly to select the

tuner.

2 Press (MODE) repeatedly to select the

band.

3 Press the number button ((1) to (6)) on

which the desired station is stored.

continue to next page t

10

RDS

Overview of the RDS

function

Radio Data System (RDS) is a broadcasting

service that allows FM stations to send

additional digital information along with the

regular radio programme signal. Your car

stereo offers you a variety of services. Here are

just a few: retuning the same programme

automatically, listening to traffic

announcements, and locating a station by

programme type.

Notes

• Depending on the country or region, not all of

the RDS functions are available.

• RDS may not work properly if the signal strength

is weak or if the station you are tuned to is not

transmitting RDS data.

Displaying the station

name

The name of the current station lights up in the

display.

Select an FM station (page 9).

When you tune in an FM station that

transmits RDS data, the station name

appears in the display.

Note

The “*” indication means that an RDS station is

being received.

Changing the display item

Each time you press (DSPL), the item changes

as follows:

Station Name* (Frequency) y Clock

* When you tune in an FM station that transmits

RDS data, the station name appears.

Note

“NO NAME” appears if the received station does

not transmit RDS data.

If you cannot tune in a preset

station

— Automatic tuning/ Local Seek Mode

Automatic tuning:

Press either side of (SEEK/AMS) to search

for the station.

Scanning stops when the unit receives a

station. Press either side of (SEEK/AMS)

repeatedly until the desired station is

received.

Local Seek Mode:

If the automatic tuning stops too

frequently, press (SENS) repeatedly until

“LOCAL-ON” appears.

“LCL” indicator is displayed.

Only the stations with relatively strong

signals will be tuned in.

Tip

If you know the frequency of the station you want

to listen to, press either side of (SEEK/AMS) until

the desired frequency appears (manual tuning).

If FM stereo reception is poor

— Monaural Mode

During radio reception, press (SENS)

repeatedly until “MONO-ON” appears.

“MONO” indicator is displayed.

The sound improves, but becomes

monaural (“ST” disappears).

To return to normal mode, select “MONO-

OFF.”

11

Changing the display item

Each time you press (AF), the item changes as

follows:

AF-ON y AF-OFF

Notes

• When “NO AF” and the station name flash

alternately, it means that the unit cannot find an

alternative station in the network.

• If the station name starts flashing after selecting

a station with the AF function on, this indicates

that no alternative frequency is available. Press

either side of (SEEK/AMS) while the station name

is flashing (within eight seconds). The unit starts

searching for another frequency with the same PI

(Programme Identification) data (“PI SEEK”

appears and no sound is heard). If the unit

cannot find another frequency, “NO PI” appears,

and the unit returns to the previously selected

frequency.

Listening to a regional programme

The “REG-ON” (regional on) function lets you

stay tuned to a regional programme without

being switched to another regional station

(Note that you must turn the AF function on).

The unit is factory preset to “REG-ON,” but if

you want to turn off the function, do the

following.

During radio reception, press (AF) for

two seconds until “REG-OFF” appears.

Note that selecting “REG-OFF” might cause

the unit to switch to another regional

station within the same network.

To return to regional on, select “REG-ON.”

Note

This function does not work in the United

Kingdom and in some other areas.

Changing the display item

Each time you press (AF) for two seconds, the

item changes as follows:

REG-ON y REG-OFF

continue to next page t

Retuning the same

programme automatically

— Alternative Frequencies (AF)

The Alternative Frequencies (AF) function

automatically selects and retunes the station

with the strongest signal in a network. By

using this function, you can continuously

listen to the same programme during a long-

distance drive without having to retune the

station manually.

1 Select an FM station (page 9).

2 Press (AF) repeatedly until “AF-ON”

appears.

The unit starts searching for an alternative

station with a stronger signal in the same

network.

Note

When there is no alternative station in the area

and you do not need to search for an alternative

station, turn the AF function off by pressing (AF)

repeatedly until “AF-OFF” appears.

102.5MHz

96.0MHz

Frequencies change automatically.

Station

98.5MHz

12

Listening to traffic

announcements

The Traffic Announcement (TA) and Traffic

Programme (TP) data let you automatically

tune in an FM station that is broadcasting

traffic announcements even if you are listening

to other programme sources.

Press (TA) repeatedly until “TA-ON”

appears.

The unit starts searching for traffic

information stations. “TP” appears in the

display when the unit finds a station

broadcasting traffic announcements.

When the traffic announcement starts,

“TA” flashes. The flashing stops when the

traffic announcement is over.

Tip

If the traffic announcement starts while you are

listening to another programme source, the unit

automatically switches to the announcement and

goes back to the original source when the

announcement is over.

Notes

•

“NO TP” flashes for five seconds if the received

station does not broadcast traffic announcements.

Then, the unit starts searching for a station that

broadcasts it.

• When “EON” appears with “TP” in the display,

the current station makes use of broadcast traffic

announcements by other stations in the same

network.

To cancel the current traffic

announcement

Press (TA).

To cancel all traffic announcements, turn off

the function by pressing (TA) until

“TA-OFF” appears.

Local link function

(United Kingdom only)

The Local Link function lets you select other

local stations in the area, even if they are not

stored on your number buttons.

1 Press a number button that has a local

station stored on it.

2 Within five seconds, press the number

button of the local station again.

3 Repeat this procedure until the desired

local station is received.

13

Presetting the volume of traffic

announcements

You can preset the volume level of the traffic

announcements beforehand so you won’t

miss the announcement. When a traffic

announcement starts, the volume will be

automatically adjusted to the preset level.

1 Press the volume button to adjust the

desired volume level.

2 Press (TA) for two seconds.

“TA” appears and the setting is stored.

Receiving emergency

announcements

If an emergency announcement comes in while

you are listening to the radio, the programme

will automatically switch to it. If you are

listening to a source other than the radio, the

emergency announcements will be heard if

you set AF or TA to on. The unit will then

automatically switch to these announcements

no matter which source you are listening to at

the time.

Presetting the RDS

stations with the AF and

TA data

When you preset RDS stations, the unit stores

each station’s data as well as its frequency, so

you don’t have to turn on the AF or TA

function every time you tune in the preset

station. You can select a different setting (AF,

TA, or both) for individual preset stations, or

the same setting for all preset stations.

Presetting the same setting for all

preset stations

1 Select an FM band (page 9).

2 Press (AF) and/or (TA) to select “AF-ON”

and/or “TA-ON.”

Note that selecting “AF-OFF” or “TA-OFF”

stores not only RDS stations, but also non-

RDS stations.

3 Press (SENS) (BTM) until “BTM” flashes.

Presetting different settings for

each preset station

1 Select an FM band, and tune in the

desired station.

2 Press (AF) and/or (TA) to select “AF-ON”

and/or “TA-ON.”

3 Press the desired number button until

“MEM” appears.

Repeat from step 1 to preset other stations.

Tip

If you want to change the preset AF and/or TA

setting after you tune in the preset station, you

can do so by turning the AF or TA function on or

off.

14

1 Press (PTY) during FM reception.

The current programme type name appears

if the station is transmitting the PTY data.

“- - - - -” appears if the received station is

not an RDS station, or if the RDS data has

not been received.

If the TA function is ON, the unit starts

searching for the next station.

2 Press (PTY) repeatedly until the desired

programme type appears.

The programme types appear in the order

shown in the above table. Note that you

cannot select “NONE” (Not specified) for

searching.

3 Press either side of (SEEK/AMS).

The unit starts searching for a station

broadcasting the selected programme type.

When the unit finds the programme, the

programme type appears again for five

seconds.

“NO” and the programme type appear

alternately for five seconds if the unit

cannot find the programme type. It then

returns to the previously selected station.

Locating a station by

programme type

You can locate the station you want by

selecting one of the programme types shown

below.

Programme types Display

News NEWS

Current Affairs AFFAIRS

Information INFO

Sports SPORT

Education EDUCATE

Drama DRAMA

Culture CULTURE

Science SCIENCE

Varied VARIED

Popular Music POP M

Rock Music ROCK M

Easy Listening EASY M

Light Classical LIGHT M

Classical CLASSICS

Other Music Type OTHER M

Weather WEATHER

Finance FINANCE

Children’s Programmes CHILDREN

Social Affairs SOCIAL A

Religion RELIGION

Phone In PHONE IN

Travel TRAVEL

Leisure LEISURE

Jazz Music JAZZ

Country Music COUNTRY

National Music NATION M

Oldies Music OLDIES

Folk Music FOLK M

Documentary DOCUMENT

Not specified NONE

Note

You cannot use this function in some countries

where no PTY (Programme Type selection) data is

available.

15

Other Functions

You can also control this unit with the rotary

commander (optional).

Labelling the rotary

commander

Depending on how you mount the rotary

commander, attach the appropriate label as

shown in the illustration below.

SEL

DSPL

MODE

SEL

DSPL

MODE

Setting the clock

automatically

The CT (Clock Time) data from the RDS

transmission sets the clock automatically.

Selecting “CT-ON”

During radio reception, press (SEL) and

(2) simultaneously.

The clock is set.

In one second the normal display

automatically appears.

To select “CT-OFF”, press (SEL) and (2)

simultaneously again.

Notes

• The CT function may not work even though an

RDS station is being received.

• There might be a difference between the time

set by the CT function and the actual time.

16

OFF

Rotate the VOL control to

adjust the volume.

Press (ATT) to

attenuate the

sound.

Press (OFF) to turn

off the unit.

Other operations

Note

When installing in a car without ACC (accessory)

position on the ignition key switch, press (OFF) for

two seconds to turn off the clock display after

turning off the engine.

By rotating the control

(the SEEK/AMS control)

Rotate the control and release it to:

•Locate the beginnings of tracks on the

tape. Rotate and hold the control, and

release it to fast-wind the tape. To start

playback while fast-winding the tape,

press (MODE).

•Locate a specific track on a disc. Rotate

and hold the control until you locate the

specific point in a track, then release it to

start playback.

•Tune in stations automatically. Rotate and

hold the control to find a specific station.

By pushing in and rotating the

control (the PRESET/DISC control)

Push in and rotate the control to:

•Receive the stations memorised on the

number buttons.

•Change the disc.

Using the rotary

commander

The rotary commander works by pressing

buttons and/or rotating controls.

You can also control the optional CD or MD

units with the rotary commander.

By pressing buttons

(the SOURCE and MODE buttons)

Each time you press (SOURCE), the

source changes as follows:

TUNER t CD*

1

t MD*

1

t TAPE*

2

Pressing (MODE) changes the operation

in the following ways;

• Tuner : FM1 t FM2 t FM3 t MW

t LW

• Tape*

2

: playback direction

• CD unit*

1

: CD1 t CD2 t …

• MD unit*

1

: MD1 t MD2 t …

*

1

If the corresponding optional equipment is

not connected, the item will not appear.

*

2

If a tape is not inserted, this item will not

appear.

(SOURCE)

(MODE)

17

Adjusting the sound

characteristics

You can adjust the bass, treble, balance, and

fader.

You can store the bass and treble levels

independently for each source.

1 Select the item you want to adjust by

pressing (SEL) repeatedly.

Each time you press (SEL), the item

changes as follows:

BAS (bass) t TRE (treble) t

BAL (left-right) t FAD (front-rear)

2 Adjust the selected item by pressing

either side of the volume button.

Adjust within three seconds after selecting

the item.

Attenuating the sound

Press (ATT).

After “ATT-ON” momentarily flashes, the

“ATT” indication appears in the display.

To restore the previous volume level, press

(ATT) again.

“ATT-OFF” flashes momentarily.

Tip

When the interface cable of a car telephone is

connected to the ATT lead, the unit decreases the

volume automatically when a telephone call comes

in (Telephone ATT function).

Press (DSPL) to change

the displayed items.

Press (SEL) to

adjust and select.

To decrease

To increase

Changing the operative direction

The operative direction of controls is factory-

set as shown below.

If you need to mount the rotary commander on

the right hand side of the steering column, you

can reverse the operative direction.

Press (SEL) for two seconds while

pushing the VOL control.

18

0dB

D.BASS-3

D.BASS-2

D.BASS-1

D.BASS-3

D.BASS-2

D.BASS-1

Boosting the bass sound

— D-bass

You can enjoy a clear and powerful bass

sound. The D-bass function boosts the low

frequency signal and high frequency signal

with a sharper curve than conventional bass

boost.

You can hear the bass line more clearly even

while the vocal volume remains the same. You

can emphasize and adjust the bass sound

easily with the D-BASS button.

Adjusting the bass curve

Press (D) repeatedly to select the

desired bass curve.

As the D-BASS number increases so does

the effect.

D.BASS-1 t D.BASS-2 t D.BASS-3 t

D.BASS-OFF

Note

The bass sound may distort at same volume. If the

bass sound distorts, select less effective bass curve.

Level

Frequency (Hz)

Changing the sound and

display settings

The following items can be set:

•CT (Clock Time) (page 15).

•A.SCRL (Auto Scroll)* (page 20).

•M.DSPL (Motion Display)

– the demonstration mode which appears

when the tape is ejected and no source is

selected (e.g., tuner is turned off).

•BEEP – to turn the beep sound on or off.

Selecting the desired item

Press (SEL) and the desired preset

number button simultaneously.

(SEL) + (2): CT

(SEL) + (3): A.SCRL*

(SEL) + (4): M.DSPL

(SEL) + (6): BEEP

* When no CD or MD is playing, this item will

not appear.

After the mode setting completed, the display

returns to normal play mode.

Note

The displayed item will differ depending on the

source.

To cancel the item, press (SEL) and the preset

number button simultaneously again.

19

GB

With Optional Equipment

CD/MD Unit

This unit can control external CD/MD units.

If you connect an optional CD unit with the

CD TEXT function, the CD TEXT information

will appear in the display when you play a CD

TEXT disc.

Playing a CD or MD

1 Press (SRC) repeatedly to select CD or

MD.

2 Press (MODE) until the desired unit

appears.

CD/MD playback starts.

When a CD/MD unit is connected, all the

tracks play from the beginning.

Changing the display item

Each time you press (DSPL) during CD, CD

TEXT, or MD playback, the item changes as

follows:

V

Elapsed playback time

V

Disc name*

1

/Artist name*

2

V

Track name*

3

V

Clock

*

1

If you have not labelled the disc or if there is no

disc name prerecorded on the MD, “NO NAME”

appears in the display.

*

2

If you play a CD TEXT disc, the artist name

appears in the display after the disc name. (Only

for CD TEXT discs with the artist name.)

*

3

If the track name of a CD TEXT disc or MD is not

prerecorded, “NO NAME” appears in the

display.

continue to next page t

Selecting the sound

position — “My Best sound Position”

When you drive without passengers, you can

enjoy comfortable sound environment by

“My Best sound Position.”

“My Best sound Position” has two presets,

which adjust the sound level of balance and

fader. You can select one very easily with MBP

button.

Press (MBP) repeatedly until the desired

listening position.

Mode of “My Best sound Position” will be

shown in the display in order of the table.

After one second, the display goes back to

the normal playback mode.

If you want to adjust the sound level of

balance and fader more precisely, you can

do it in (SEL) button (See “Adjusting the

sound characteristics” on page 17).

Notes

• When the BAL (balance) or FAD (fader) in

“Adjusting the sound characteristics” (page17) is

adjusted, the MBP setting returns to OFF.

• When MBP is set to OFF, the BAL and FAD setting

is activated.

Display

window

MBP-A

MBP-B

MBP-OFF

Right

– 4dB

0

Left

0

– 4dB

0

Front

0

Rear

– 4dB

0

Balance Level

Fader Level

20

Locating a specific track

— Automatic Music Sensor (AMS)

During playback, press either side of

(SEEK/AMS) momentarily for each track

you want to skip.

Locating a specific point in a track

— Manual Search

During playback, press and hold either

side of (SEEK/AMS). Release when you

have found the desired point.

Switching to other discs

During playback, press (1) (DISC –) or

(2) (DISC +) button.

The desired disc in the current unit begins

playback.

(1) (DISC –): For preceding discs

(2) (DISC +): For succeeding discs

To locate succeeding tracks

To locate preceding tracks

To search forward

To search backward

Disc number

Track number

SEEK

AMS

SEEK

AMS

Automatically scrolling a disc name

— Auto Scroll

If the disc name, artist name, or track name on

a CD TEXT disc or MD exceeds 8 characters

and the Auto Scroll function is on, information

automatically scrolls across the display as

follows:

• The disc name appears when the disc has

changed (if the disc name is selected).

• The track name appears when the track has

changed (if the track name is selected).

If you press (DSPL) to change the display

item, the disc or track name of the CD TEXT or

MD disc is scrolled automatically whether you

set the function on or off.

Selecting “A.SCRL-ON”

During playback, press (SEL) and (3)

simultaneously.

In two seconds the normal display

automatically appears.

To select “A.SCRL-OFF”, press (SEL) and (3)

simultaneously again.

Note

For some discs with very many characters, the

following cases may happen:

— Some of the characters are not displayed.

— Auto Scroll does not work.

La pagina sta caricando ...

Sony XR-CA400 Manuale utente

Sony XR-CA400 Manuale utente

in altre lingue

Documenti correlati

Altri documenti