Yamaha RX-V740RDS Manuale del proprietario

Marca: Yamaha

Modello: RX-V740RDS

Categoria: Ricevitori AV

Tipo: Manuale del proprietario

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.

YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA

YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY

YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE

YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND

YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN

YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

Printed in Malaysia WA69370

RX-V740RDS

OWNER’S MANUAL

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

BRUKSANVISNING

MANUALE DI ISTRUZIONI

MANUAL DE INSTRUCCIONES

GEBRUIKSAANWIJZING

RX-V740RDS

AV Receiver

Ampli-tuner audio-vidéo

TECHNISCHE GEGEVENS

AUDIO GEDEELTE

• Minimum RMS uitgangsvermogen voor hoofd, midden, achter,

midden achter

20 Hz t/m 20 kHz, 0,06% THV, 8 Ω ..................................... 90 W

1 kHz, 0,7% THV, 8 Ω ........................................................ 110 W

• DIN Standaard uitgangsvermogen

[Model voor Europa]

1 kHz, 0,7% THV, 4 Ω ........................................................ 140 W

• IEC uitgangsvermogen

[Modellen voor het V.K., Europa en Singapore]

1 kHz, 0,06% THV, 8 Ω ...................................................... 105 W

• Maximum uitgangsvermogen (EIAJ)

[Modellen voor China, Korea en algemene modellen]

1 kHz, 10% THV, 8 Ω ......................................................... 130 W

• Dynamisch uitgangsvermogen (IHF) 8/6/4/2 Ω

[Modellen voor de VS en Canada] ................. 130/160/190/235 W

[Overige modellen] ......................................... 120/145/185/230 W

• Dempingsfactor

20 Hz t/m 20 kHz, 8 Ω ................................................ 100 of meer

• Frequentierespons

CD naar Hoofd L/R .............................. 10 Hz t/m 100 kHz, –3 dB

• Totale Harmonische Vervorming

20 Hz t/m 20 kHz, 45 W, 8 Ω, Hoofd L/R ............................ 0,06%

• Signaal-ruis verhouding (IHF-A Netwerk)

PHONO MM naar OUT (REC) (kortgesloten 5 mV)

[Modellen voor de VS, Canada, China, Korea en algemene

modellen] ........................................................................... 86 dB

[Overige modellen] ............................................................ 81 dB

CD (kortgesloten 250 mV) naar Hoofd L/R, Effect uit ...... 100 dB

• Residuele ruis (IHF-A Netwerk)

Hoofd L/R ......................................................... 150 µV of minder

• Kanaalscheiding (1 kHz/10 kHz)

CD (5,1 kΩ getermineerd) naar Hoofd L/R .............. 60 dB/45 dB

• Toonregeling (Hoofd L/R)

BASS versterking/verzwakking .............................. ±10 dB/50 Hz

TREBLE versterking/verzwakking ....................... ±10 dB/20 kHz

• Uitgangsvermogen hoofdtelefoon ............................. 150 mV/100 Ω

• Ingangsgevoeligheid

CD, etc .................................................................... 150 mV/47 kΩ

6CH INPUT ............................................................ 150 mV/47 kΩ

• Uitgangsniveau

OUT (REC) ........................................................... 150 mV/1,2 kΩ

OUTPUT MAIN/CENTER/REAR CENTER/

REAR (SURROUND) ............................................ 2,4 V/1,2 kΩ

OUTPUT SUBWOOFER ............................................. 4 V/1,2 kΩ

ZONE 2 [modellen voor de VS, Canada en Australië]

............................................................................ 150 mV/1,5 kΩ

VIDEO GEDEELTE

• Videosignaal-type ....................................................... NTSC of PAL

• Signaal-ruis verhouding .......................................................... 50 dB

• Frequentierespons (MONITOR OUT)

Composiet, S-Video ............................... 5 Hz t/m 10 MHz, –3 dB

Component ............................................. 5 Hz t/m 30 MHz, –3 dB

FM GEDEELTE

• Afstembereik

[Modellen voor de VS en Canada] ................ 87,5 t/m 107,9 MHz

[Overige modellen] .................................... 87,50 t/m 108,00 MHz

• 50 dB Rustgevoeligheid (IHF, 100% mod.)

Mono/Stereo ........................ 2,0 µV (17,3 dBf) /25 µV (39,2 dBf)

• Bruikbare gevoeligheid (IHF, mono) .................... 1,0 µV (11,2 dBf)

• Signaal-ruis verhouding (IHF)

Mono/Stereo .............................................................. 76 dB/70 dB

• Harmonische vervorming (1 kHz)

Mono/Stereo ................................................................. 0,2%/0,3%

• Stereoscheiding (1 kHz) .......................................................... 42 dB

• Frequentierespons ............................. 20 Hz t/m 15 kHz +0,5, –2 dB

AM GEDEELTE

• Afstembereik ........................................ 530/531 t/m 1710/1611 kHz

• Bruikbare gevoeligheid .................................................... 300 µV/m

ALGEMEEN

• Stroomvoorziening

[Modellen voor de VS en Canada] ...... 120 V wisselstroom/60 Hz

[Model voor Australië] ........................ 240 V wisselstroom/50 Hz

[Modellen voor het V.K., Europa en Singapore]

.......................................................... 230 V wisselstroom/50 Hz

[Model voor Korea] ............................. 220 V wisselstroom/60 Hz

[Modellen voor China en algemene modellen]

............................... 110/120/220/240 V wisselstroom, 50/60 Hz

• Stroomverbruik

[Modellen voor de VS en Canada] ......................... 320 W/420 VA

[Overige modellen] .............................................................. 320 W

Standby-stand ........................................................ ongeveer 0,9 W

• Netstroom-aansluitingen

[Modellen voor de VS, Canada, Europa en Singapore]

......................................................... 2 (maximum totaal 100 W)

[Modellen voor China en algemene modellen]

........................................................... 2 (maximum totaal 50 W)

[Modellen voor het V.K. en Australië] .......... 1 (maximum 100 W)

• Afmetingen (b x h x d) ..................................... 435 x 171 x 390 mm

• Gewicht.................................................................................. 13,0 kg

* Technische gegevens kunnen zonder voorafgaande kennisgeving

gewijzigd worden.

0100RX-V740_cv-GB.p65 03.2.10, 9:45 AM1

1 To assure the finest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

2 Install this sound system in a well ventilated, cool,

dry, clean place — away from direct sunlight, heat

sources, vibration, dust, moisture, and/or cold.

Allow ventilation space of at least 30 cm on the top,

20 cm on the left and right, and 20 cm on the back

of this unit.

3 Locate this unit away from other electrical

appliances, motors, or transformers to avoid

humming sounds.

Do not expose this unit to sudden temperature

changes from cold to hot, and do not locate this unit

in a environment with high humidity (i.e. a room with

a humidifier) to prevent condensation inside this unit,

which may cause an electrical shock, fire, damage to

this unit, and/or personal injury.

5 Avoid installing this unit where foreign object may

fall onto this unit and/or this unit may be exposed

to liquid dripping or splashing. On the top of this

unit, do not place:

– Other components, as they may cause damage

and/or discoloration on the surface of this unit.

–

Burning objects (i.e. candles), as they may cause

fire, damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall

and liquid may cause electrical shock to the

user and/or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth,

curtain, etc. in order not to obstruct heat radiation.

If the temperature inside this unit rises, it may

cause fire, damage to this unit, and/or personal

injury.

7 Do not plug in this unit to a wall outlet until all

connections are complete.

8 Do not operate this unit upside-down. It may

overheat, possibly causing damage.

9 Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cord from the wall

outlet, grasp the plug; do not pull the cord.

11 Do not clean this unit with chemical solvents; this

might damage the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used.

Using this unit with a higher voltage than specified

is dangerous and may cause fire, damage to this

unit, and/or personal injury. YAMAHA will not be

held responsible for any damage resulting from use

of this unit with a voltage other than specified.

To prevent damage by lightning, disconnect the power

cord from the wall outlet during an electrical storm.

14 Do not attempt to modify or fix this unit. Contact

qualified YAMAHA service personnel when any

service is needed. The cabinet should never be

opened for any reasons.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

15 When not planning to use this unit for long periods

of time (i.e. vacation), disconnect the AC power

plug from the wall outlet.

16 Be sure to read the “TROUBLESHOOTING” section

on common operating errors before concluding that

this unit is faulty.

17 Before moving this unit, press STANDBY/ON to set

this unit in standby mode, and disconnect the AC

power plug from the wall outlet.

VOLTAGE SELECTOR (China and General models only)

The VOLTAGE SELECTOR on the rear panel of this

unit must be set for your local main voltage

BEFORE plugging into the AC main supply.

Voltages are 110/120/220/240 V AC, 50/60 Hz.

This unit is not disconnected from the AC power

source as long as it is connected to the wall outlet,

even if this unit itself is turned off. This state is called

standby mode. In this state, this unit is designed to

consume a very small quantity of power.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN

OR MOISTURE.

■ For U.K. customers

If the socket outlets in the home are not suitable for the

plug supplied with this appliance, it should be cut off and

an appropriate 3 pin plug fitted. For details, refer to the

instructions described below.

Note

• The plug severed from the mains lead must be destroyed, as a

plug with bared flexible cord is hazardous if engaged in a live

socket outlet.

■ Special Instructions for U.K. Model

IMPORTANT

THE WIRES IN MAINS LEAD ARE COLOURED

IN ACCORDANCE WITH THE FOLLOWING

CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this

apparatus may not correspond with the coloured

markings identifying the terminals in your plug,

proceed as follows:

The wire which is coloured BLUE must be connected

to the terminal which is marked with the letter N or

coloured BLACK. The wire which is coloured

BROWN must be connected to the terminal which is

marked with the letter L or coloured RED.

Making sure that neither core is connected to the earth

terminal of the three pin plug.

CAUTION

0101RX-V740_Cau_E-GB.p65 03.2.12, 4:21 PM2

English

INTRODUCTION

PREPARATION

BASIC

OPERATION

ADVANCED

OPERATION

ADDITIONAL

INFORMATION

CONTENTS

INTRODUCTION

CONTENTS ............................................................ 1

FEATURES ............................................................. 2

GETTING STARTED ............................................ 3

Supplied accessories .................................................. 3

Installing batteries in the remote control ................... 3

CONTROLS AND FUNCTIONS ......................... 4

Front panel................................................................. 4

Remote control .......................................................... 6

Front panel display .................................................... 8

ADVANCED OPERATION

SET MENU ........................................................... 41

Set menu list ............................................................ 41

Adjusting the items on the set menu ....................... 41

SOUND 1 SPEAKER SET

(speaker mode settings) ....................................... 42

SOUND 2 SP DISTANCE (speaker distance) ........ 44

SOUND 3 LFE LEVEL .......................................... 44

SOUND 4 D. RANGE (dynamic range) ................. 44

SOUND 5 CENTER GEQ

(center graphic equalizer) .................................... 45

SOUND 6 HP TONE CTRL

(headphone tone control) .................................... 45

INPUT 1 I/O ASSIGN (input/output assignment) .. 45

INPUT 2 INPUT MODE (initial input mode) ........ 46

INPUT 3 INPUT RENAME .................................... 46

OPTION 1 DISPLAY SET ...................................... 46

OPTION 2 MEM. GUARD (memory guard) ......... 47

OPTION 3 AUDIO MUTE ..................................... 47

OPTION 4 ZONE SET ........................................... 47

REMOTE CONTROL FEATURES ................... 48

Control area ............................................................. 48

Setting the manufacturer code ................................. 49

Changing the source name in the display window .. 50

Clearing renamed source names, and setup

manufacturer codes ............................................. 51

Controlling other components ................................. 52

SETTING THE SPEAKER LEVELS ................ 53

Adjusting the volume during playback ................... 53

Using the test tone ................................................... 53

PREPARATION

CONNECTIONS .................................................... 9

Before connecting components ................................. 9

Connecting video components ................................ 10

Connecting audio components ................................ 12

Connecting the antennas.......................................... 13

Connecting an external amplifier ............................ 14

Connecting an external decoder .............................. 14

Connecting the speakers .......................................... 15

Connecting the power supply cords ........................ 18

Turning on the power .............................................. 18

ON-SCREEN DISPLAY (OSD) .......................... 19

BASIC SYSTEM SETTINGS ............................. 20

Using the basic menu .............................................. 20

Setting the unit to match your speaker system ........ 22

Setting speaker output levels (SP LEVEL) ............. 22

BASIC OPERATION

PLAYBACK .......................................................... 23

Input modes and indications .................................... 25

Selecting a sound field program .............................. 26

DIGITAL SOUND FIELD PROCESSING (DSP)

............................................................................ 29

Understanding sound fields ..................................... 29

Hi-Fi DSP programs ................................................ 29

CINEMA-DSP ...................................................... 30

Sound design of CINEMA-DSP ............................. 30

CINEMA-DSP Programs ........................................ 30

Sound field effects ................................................... 32

TUNING ................................................................ 33

Presetting stations .................................................... 34

Selecting a preset station ......................................... 36

RECEIVING RDS STATIONS ........................... 37

Description of RDS data ......................................... 37

Changing the RDS mode ......................................... 37

PTY SEEK function ................................................ 38

EON function .......................................................... 38

SLEEP TIMER ..................................................... 39

RECORDING ....................................................... 40

ADDITIONAL INFORMATION

SOUND FIELD PROGRAM PARAMETER

EDITING .......................................................... 54

What is a sound field? ............................................. 54

Sound field program parameters ............................. 54

Changing parameter settings ................................... 55

Digital Sound Field Parameter Descriptions ........... 56

TROUBLESHOOTING ....................................... 60

GLOSSARY .......................................................... 64

SPECIFICATIONS .............................................. 66

0102RX-V740_01-08_EN-GB.P65 03.2.12, 4:22 PM1

Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic”, and the double-D symbol are

trademarks of Dolby Laboratories.

FEATURES

Other features

◆ 96 kHz/24-bit D/A converter

◆ Set menu for optimizing this unit for your Audio/

Video system

◆ Test tone generator for easier speaker balance

adjustment

◆ 6-channel external decoder input

◆ On screen display function helpful in controlling this

unit

◆ Component video input/output capability

◆ S-video signal input/output capability

◆ Optical and coaxial digital audio signal jacks

◆ Video Conversion (Composite Video ⇔ S Video)

◆ Sleep timer

◆ Remote control with preset manufacturer codes

◆ Zone B capability

“DTS”, “DTS-ES Extended Surround” and “Neo:6” are

trademarks of Digital Theater System, Inc.

Built-in 6-channel power amplifier

◆ Minimum RMS output power

(0.06% THD, 20 Hz – 20 kHz, 8Ω)

Main: 90 W + 90 W

Center: 90 W

Rear: 90 W + 90 W

Rear center: 90 W

Multi-mode digital sound field processing

◆ Dolby Pro Logic/Dolby Pro Logic II decoder

◆ Dolby Digital/Dolby Digital EX decoder

◆ DTS/DTS-ES Matrix 6.1, Discrete 6.1, DTS Neo:6

Decoder

◆ CINEMA DSP: Combination of YAMAHA DSP

technology and Dolby Pro Logic, Dolby Digital or

DTS

◆ Virtual CINEMA DSP

◆ SILENT CINEMA DSP

Sophisticated AM/FM Tuner

◆ 40-Station random access preset tuning

◆ Automatic preset tuning

◆ Preset station shifting capability (Preset editing)

■ About this manual

• y indicates a tip for your operation.

• Some operations can be performed by using either the buttons on the main unit or on the remote control. In cases

when the button names differ between the main unit and the remote control, the button name on the remote control is

given in parentheses.

• This manual is printed prior to production. Design and specifications are subject to change in part for the reason of

the improvement in operativity ability, and others. In this case, the product has priority.

0102RX-V740_01-08_EN-GB.P65 03.2.12, 4:22 PM2

English

INTRODUCTION

Installing batteries in the remote

control

Insert the batteries in the correct direction by aligning the

+ and – marks on the batteries with the polarity markings

(+ and –) inside the battery compartment.

1 Press the part marked with a and slide off

the battery compartment cover.

2 Insert the four batteries supplied (AAA, R03,

UM-4) according to the polarity markings on

the inside of the battery compartment.

3 Slide the cover back on so that it snaps into

place.

■ Notes on batteries

• Change all of the batteries if you notice a decrease in

the operating range of the remote control, that the

indicator does not flash, or the light becoming dim.

• Do not use old batteries together with new ones.

• Do not use different types of batteries (such as alkaline

and manganese batteries) together. Read the packaging

carefully as these different types of batteries may have

the same shape and color.

• If the batteries have leaked, dispose of them

immediately. Avoid touching the leaked material or

letting it come into contact with clothing, etc. Clean the

battery compartment thoroughly before installing new

batteries.

If the remote control is without batteries for more than

2 minutes, or if exhausted batteries remain in the

remote control, the contents of the memory may be

cleared. When the memory is cleared, insert new

batteries, set up the manufacturer code and program

any acquired functions that may have been cleared.

AM loop antenna

(Europe, U.K., Australia and

Singapore models)

Indoor FM antenna

(U.S.A., Canada, China,

Korea and General models)

Batteries (4)

(AAA, R03, UM-4)

Remote control

GETTING STARTED

Supplied accessories

After unpacking, check that the following parts are contained.

75-ohm/300-ohm antenna

adapter (U.K. model)

DISC SKIP

TRANSMIT

NAME

CLEAR

CODE SET

SYSTEM

POWER

STANDBY

6CH INPUT

SLEEP

PHONO

AUX

TV/CBL VCR 1 VCR2/DVR DVD

TUNER

CD-R

SELECT

POWER

AMP

REC

AUDIO

VOL

TV INPUT

SET MENU

A/B/C/D/E

LEVEL

TITLE

TV VOL

TV MUTE

SELECT

MUTE

TEST

ON SCREEN

STEREO

EFFECT

DISPLAYRETURN

PRESET PRESET

HALL JAZZ CLUB

ROCK

CONCERT

ENTER-

TAINMENT

MUSIC

VIDEO

THEATER

MOVIE

THEATER 1

MOVIE

THEATER 2

/DTS

SUR.

1234

5678

9101112

NIGHT

6.1/5.1

CHP/INDEX

POWER

0102RX-V740_01-08_EN-GB.P65 03.2.12, 4:22 PM3

CONTROLS AND FUNCTIONS

Front panel

1 STANDBY/ON

Turns the unit on, or sets it in standby mode. When you

turn the unit on, you will hear a click and there will be a 4

to 5-second delay before it can reproduce sound.

Standby mode

In this mode, the unit uses a small amount of power in

order to receive infrared-signals from the remote

control.

2 INPUT MODE

Sets the priority for the types of input signals (AUTO,

DTS, ANALOG) received when one component is

connected to two or more input jacks. You cannot set

priority for an audio source if you have selected 6CH

INPUT as the input source.

3 INPUT

Selects the input source you want to listen to or watch.

4 6CH INPUT

Selects the audio source connected to the 6CH INPUT

jacks. This selection takes priority over sources selected

with INPUT (or the input selector buttons on the remote

control).

5 Remote control sensor

Receives signals from the remote control.

6 Front panel display

Shows information about the operational status of the

unit.

7 TUNING MODE (AUTO/MAN’L MONO)

Switches the tuning mode between automatic and manual.

8 PRESET/TUNING (EDIT)

Switches the function of PRESET/TUNING l / h

between selecting a preset station number and tuning (the

colon (:) turns on or off).

This button is also used to exchange the assignment of

two preset stations with each other.

9 FM/AM

Switches the reception band between FM and AM.

0 MEMORY (MAN’L/AUTO FM)

Stores the current station in memory.

q VOLUME

Controls the output level of all audio channels.

This does not affect the OUT (REC) level.

(U.K. and Europe models only)

INPUT

AUTO/MANUAL MONO

MAN`L/AUTO FM

TUNING MODE MEMORY

EDIT

PRESET/TUNING

FM/AM

OPTICALRAUDIOLVIDEOS VIDEO

EFFECT

PRESET/TUNING

A/B/C/D/E

PROGRAMSTEREOSPEAKERS

6CH INPUTINPUT MODE

MODE START

RDS MODE/FREQ

PTY SEEK

EON

SILENT

PHONES

TREBLE

VOLUME

BASS

VIDEO AUX

STANDBY

/ON

NEXT SET MENU

1 32 4 8756 q90

epo

t iu

a s fd

MODE START

RDS MODE/FREQ

PTY SEEK

EON

w r y

0102RX-V740_01-08_EN-GB.P65 03.2.12, 4:22 PM4

English

INTRODUCTION

w SILENT (PHONES jack)

Allows you to enjoy DSP effects when listening with

headphones. When you connect headphones to the

headphone jack, no signals are output to the speakers or

the OUTPUT jacks.

e SPEAKERS A/B

Turns the set of main speakers connected to the A and/or

B terminals on or off.

r STEREO/EFFECT

Switches between normal stereo and DSP effect

reproduction. When you select STEREO, the unit mixes

down all Dolby Digital and DTS signals (except the LFE

channel) as well as those 2-channel signals without

effects, to the main left and right speakers.

t PROGRAM l / h

Select the DSP program.

y A/B/C/D/E

Selects preset station groups A to E when the unit is in

tuner mode.

Selects the set menu mode when the unit is not in tuner

mode.

u PRESET/TUNING l / h

Select preset station numbers 1 to 8 when a colon (:) is

displayed in the front panel display.

Select the tuning frequency when a colon (:) is not

displayed when the unit is in tuner mode.

SET MENU –/+

Adjust settings on the set menu when the unit is not in

tuner mode.

i VIDEO AUX jacks

Inputs for audio and video signals from a portable

external source (game console, etc.). Set the input source

to V-AUX to select source signals from these jacks.

o BASS

Adjusts the low-frequency response for the main left and

right channels.

Turn right to increase or left to decrease the low-

frequency response.

p TREBLE

Adjusts the high-frequency response for the main left and

right channels.

Turn right to increase or left to decrease the high-

frequency response.

(U.K. and Europe models only)

a RDS MODE/FREQ

Press this button when the unit is receiving an RDS

station, to cycle the display mode among PS mode,

PTY mode, RT mode, CT mode (if the station offers

those RDS data service) and/or frequency display

mode in turn.

s PTY SEEK MODE

Press this button to set the unit in the PTY SEEK

mode.

d PTY SEEK START

Press this button to begin searching for a station after

the desired program type has been selected in the PTY

SEEK mode.

f EON

Press this button to select a radio program type

(NEWS, INFO, AFFAIRS, SPORT) to tune in

automatically.

CONTROLS AND FUNCTIONS

0102RX-V740_01-08_EN-GB.P65 03.2.12, 4:22 PM5

DISC SKIP

TRANSMIT

NAME

CLEAR

CODE SET

SYSTEM

POWER

STANDBY

6CH INPUT

SLEEP

PHONO

AUX

TV/CBL VCR 1 VCR2/DVR DVD

TUNER

CD-R

SELECT

POWER

AMP

REC

AUDIO

VOL

TV INPUT

SET MENU

A/B/C/D/E

LEVEL

TITLE

TV VOL

TV MUTE

SELECT

MUTE

TEST

ON SCREEN

STEREO

EFFECT

DISPLAYRETURN

PRESET PRESET

HALL JAZZ CLUB

ROCK

CONCERT

ENTER-

TAINMENT

MUSIC

VIDEO

THEATER

MOVIE

THEATER 1

MOVIE

THEATER 2

/DTS

SUR.

1234

5678

9101112

NIGHT

6.1/5.1

CHP/INDEX

POWER

Remote control

1 Infrared window

Outputs infrared control signals. Aim this window at the

component you want to operate.

2 TRANSMIT indicator

Flashes while the remote control is sending signals.

3 STANDBY

Sets the unit in standby mode.

4 SYSTEM POWER

Turns on the power of the unit.

5 Å/ı/Ç

Sets the remote control to operate other components (not

necessarily connected to this unit) without changing this

unit’s input source.

6 Input selector buttons

Select the input source and set the remote control to

operate the selected source component.

7 Display window

Shows the source component you are currently

controlling.

8 LEVEL

Selects the effect speaker channel to adjust.

9 Multi control section

Used to change and implement settings.

0 TEST

Outputs a test tone for use when adjusting the speaker

levels.

q DSP program

Select DSP programs when the remote control is in AMP

mode. Press one of these buttons repeatedly to select a

DSP program within a program group.

w RE-NAME

Used to change the input source name in the display

window.

e CLEAR

Used to clear functions acquired using the rename

features, and to set manufacturer codes.

r CODE SET

Used to set up manufacturer codes (see page 49).

t SLEEP

Sets the sleep timer.

y 6CH INPUT

Selects the audio source connected to the 6CH INPUT

jacks.

This section describes the controls and functions of the

remote control. Make sure that the AMP mode is selected

before use.

CONTROLS AND FUNCTIONS

0102RX-V740_01-08_EN-GB.P65 03.2.12, 4:22 PM6

English

INTRODUCTION

Approximately 6 m (20 feet)

u SELECT k/n

Set the remote to control a component other than the one

selected with the input selector buttons.

i AMP

Switches the function of the same controls between AMP

and the component selected using the input selector

buttons.

o VOL +/–

Increase or decrease the volume level.

p MUTE

Mutes the sound. Press again to restore the audio output

to the previous volume level.

a SET MENU

Selects the set menu mode.

s ON SCREEN

Displays the input or operation status on the on-screen

display.

d STEREO/EFFECT

Switches between normal stereo and DSP effect

reproduction. When you select STEREO the unit mixes

down all Dolby Digital and DTS signals (except the LFE

channel) as well as those 2-channel signals without effect

sounds, to the main left and right speakers.

f 6.1/5.1

Switches the Dolby Digital EX or DTS ES decoder on or

off.

g NIGHT

Sets the unit in night listening mode.

■ Using the remote control

The remote control transmits a directional infrared beam.

Be sure to aim the remote control directly at the remote

control sensor on the main unit during operation.

■ Handling the remote control

• Do not spill water or other liquids on the remote

control.

• Do not drop the remote control.

• Do not leave or store the remote control in the

following types of conditions:

– high humidity or temperature such as near a heater,

stove or bath;

– dusty places; or

– in places subject to extremely low temperatures.

INPUT

AUTO/MANUAL MONO

MAN`L/AUTO FM

TUNING MODE MEMORY

EDIT

PRESET/TUNING FM/AM

OPTICALRAUDIOLVIDEOS VIDEO

EFFECT

PRESET/TUNING

SET MENU

A/B/C/D/E

PROGRAMSTEREOSPEAKERS

6CH INPUTINPUT MODE

SILENT

PHONES

TREBLE

VOLUME

BASS

VIDEO AUX

STANDBY

/ON

CODE SET

30° 30°

CONTROLS AND FUNCTIONS

0102RX-V740_01-08_EN-GB.P65 03.2.12, 4:22 PM7

V-AUXVCR1

VCR2/DVR

D-TV/CBL

DVD

MD/CD-R

TUNER CD PHONO

DISCRETEMATRIX

DIGITAL

PCM

SILENT

DSP

HiFi

NIGHT

VIRTUAL

A B

AUTO

STEREO

SLEEP

VOLUME

MUTE

MEMORYTUNED

L C R

RLLFE RC RR

~~~~~~~~~~~~~~

CTRTPTYPS

HOLDPTYEON

90qw yer uiop

1 Processor indicators

The indicators for the various decoders light up when the

decoders are in use.

2 VIRTUAL indicator

Lights up when using Virtual CINEMA DSP.

3 Headphones indicator

Lights up when headphones are connected to the

headphone jack.

4 Input source indicator

Highlights the current input source with a cursor.

5 Sound field indicator

Displays the sound field management the unit is using

when you listen to a DSP sound field program.

6 AUTO indicator

Shows that this unit is in the automatic tuning mode.

7 MUTE indicator

Flashes while the MUTE function is on.

8 VOLUME level indicator

Indicates the volume level.

9 PCM indicator

Lights up when this unit is reproducing PCM (pulse code

modulation) digital audio signals.

0 SILENT indicator

Lights up when headphones are connected and the digital

sound field processor is on.

q SP A B indicator

Lights up to indicate which set of main speakers is

selected. Both indicators light up when both sets of

speakers are selected.

w NIGHT indicator

Lights up when the unit is set to night listening mode.

e HiFi DSP indicator

Lights up when you select a Hi-Fi DSP sound field

program.

r CINEMA DSP indicator

Lights up when you select a CINEMA DSP sound field

program.

t Multi-information display

Shows the current DSP program name and other

information when you are adjusting or changing settings.

y STEREO indicator

Lights up when the unit is receiving a strong signal from

a FM stereo broadcast while the “AUTO” indicator is lit.

u TUNED indicator

Lights up when this unit is tuned to a radio station.

i MEMORY indicator

Flashes to show a station can be stored in memory.

o SLEEP indicator

Lights up while the sleep timer is on.

p LFE indicator

Lights up when the input signal contains an LFE signal.

a Input channel indicator

The indicators for the appropriate sound channels light up

when a digital signal from a source is played back.

s RDS indicator (U.K. and Europe models only)

The name(s) of the RDS data offered by the currently

received RDS station light(s) up.

EON indicator lights up when an RDS station that offers

the EON data service is being received.

PTY HOLD indicator lights up while searching for

stations in the PTY SEEK mode.

Front panel display

(U.K. and Europe models only)

CONTROLS AND FUNCTIONS

0102RX-V740_01-08_EN-GB.P65 03.2.12, 4:22 PM8

English

PREPARATION

PHONO

MAIN

REAR

(SURROUND)

REAR

CENTER

CENTERR L

CENTER

SUB

WOOFER

6CH INPUT

DIGITAL

OUTPUT

SIGNAL

GND

DIGITAL

INPUT

VIDEOAUDIOAUDIO

MD/CD-R

DVD

D-TV/CBL

OPTICAL

COAXIAL

VCR-1

OUT

MONITOR OUT

OUT

VCR 2

/DVR

DVD

D-TV

/CBL

/CD-R

OUT

(REC)

(PLAY)

SURROUND

MAIN

S VIDEOVIDEO

TUNER

75Ω UNBAL.

ANT

GND

ANT

CENTER

SUB

WOOFER

REAR

CENTER

REAR

(SURROUND

)

MAIN

OUTPUT

DVD

COMPORNENT VIDEO

SPEAKERS

R L

D-TV

/CBL

MONITOR

OUT

CONNECTIONS

Before connecting components

CAUTION

Do not connect this unit or other components to the

mains power until all connections between the

components have been completed.

• Be sure all connections are made correctly, that is to

say L (left) to L, R (right) to R, “+” to “+” and “–” to

“–”. Some components require different connection

methods and have different jack names. Refer to the

operation instructions for each component you wish to

connect to this unit.

• After you have completed all connections, check them

again to make sure they are correct.

• The jack names correspond to the names on the input

selector.

■ Connecting to digital jacks

This unit has digital jacks for direct transmission of

digital signals through either coaxial or fiber optic cables.

You can use the digital jacks to input PCM, Dolby Digital

and DTS bitstreams. Use digital connections if you wish

to enjoy the multi-channel sound track of DVD material,

etc. with DSP effects. All digital input jacks are

acceptable for 96 kHz sampling digital signals.

Note

• The OPTICAL jacks on this unit conform to the EIA standard.

If you use a fiber optic cable that does not conform to this

standard this unit may not function properly.

AC OUTLETS

(page 18)

6CH INPUT jacks

(page 14)

DIGITAL OUTPUT jack

(page 12)

OUTPUT jacks

(page 14)

DIGITAL INPUT jacks

(pages 9 – 12)

Antenna input terminals

(page 13)

Speaker terminals

(page 17)

Video component jacks

(pages 10 – 11)

Audio component jacks

(page 12)

SUBWOOFER OUTPUT

jack (page 17)

This jack is reserved for factory use. Do not

connect any equipment to this jack.

0103RX-V740_09-19_EN-GB.p65 03.2.12, 4:23 PM9

Connecting video components

Refer to the connection examples on the next page.

■ Types of video jacks

1 VIDEO jack

Conventional composite video signal.

2 S VIDEO jack

Transmits color and luminance separately and

achieves high-quality color reproduction.

3 COMPONENT VIDEO jacks

Transmit color difference (P

B, PR) and luminance

separately and provide the best quality picture.

Use the commercially available cable type specified for

connecting each jack.

• Signals received through the S VIDEO input jacks can be

converted to composite signals in this unit and output through

its VIDEO MONITOR OUT as well.

• (With the exception of China and General models) Signals

received through the VIDEO jack on this unit can be output

through the S VIDEO MONITOR OUT jack by setting “V

CONV.” in “OPTION 1 DISPLAY SET” on the set menu to

ON.

• When the unit receives signals through both S VIDEO and

VIDEO jacks, signals input through the S VIDEO jack have

priority.

• You can designate the input for the COMPONENT VIDEO A

and B jacks to suit your components by using “INPUT 1 I/O

ASSIGNMENT” on the set menu.

■ Connecting a video monitor

Connect the video input jack on your video monitor to the

MONITOR OUT VIDEO jack.

Note

• If you connect this unit with a source component using

Component video jacks, you also need to connect your video

monitor using Component video jacks.

■ Connecting a DVD player/digital TV/cable

Connect the optical digital audio signal output jack on

your component to the DIGITAL INPUT jack and

connect the video signal output jack on the component to

the VIDEO jack on this unit.

• Use the AUDIO jacks on this unit for a video component

which does not have optical digital output jack. However,

multi-channel reproduction cannot be obtained with audio

signals input from the AUDIO jacks.

■ Connecting a recording component

Connect the audio signal input jacks on your video

component to the AUDIO OUT jacks on this unit. Then

connect the video signal input jack on the video

component to the VIDEO OUT jack on this unit for

picture recording.

Connect the audio signal output jacks on your component

to the AUDIO IN jacks on this unit. Then connect the

video signal output jack on the component to the VIDEO

IN jack on this unit to play a source from your recording

component.

A second VCR or DVD recorder can be connected using

the VCR 2/DVR jacks.

Note

• Once you have connected a recording component to this unit,

keep its power turned on while using this unit. If the power is

off, this unit may distort the sound from other components.

COMPONENT VIDEO

S VIDEOVIDEO

1 2 3

S VIDEO

VIDEO

COMPONENT

VIDEO

Only when “V CONV.” in “OPTION 1 DISPLAY

SET” is set to ON on the set menu.

Output

(MONITOR OUT)

Signal flow inside this unit

Input

CONNECTIONS

0103RX-V740_09-19_EN-GB.p65 03.2.12, 4:23 PM10

English

PREPARATION

indicates video signal direction

indicates optical cables

indicates right analog cables

indicates left analog cables

indicates audio signal direction

Video monitorVCR

DVD player

TV/digital TV/

cable TV

PHONO

MAIN

CENTER

SUB

WOOFER

6CH INPUT

DIGITAL

OUTPUT

SIGNAL

GND

DIGITAL

INPUT

VIDEOAUDIOAUDIO

MD/CD-R

DVD

D-TV/CBL

OPTICAL

COAXIAL

VCR-1

OUT

MONITOR OUT

OUT

VCR 2

/DVR

DVD

D-TV

/CBL

/CD-R

OUT

(REC)

(PLAY)

SURROUND

MAIN

S VIDEOVIDEO

TUNER

75Ω UNBAL.

ANT

GND

ANT

REA

CENT

REAR

(SURROUND

)

MAIN

OUTPUT

DVD

COMPORNENT VIDEO

D-TV

/CBL

MONITOR

OUT

AUDIO

OUTPUT

AUDIO

INPUT

LR LR

VIDEO

INPUT

VIDEO

OUTPUT

OPTICAL

OUTPUT

AUDIO

OUTPUT

L R

VIDEO

OUTPUT

VIDEO

OUTPUT

OPTICAL

OUTPUT

AUDIO

OUTPUT

VIDEO

INPUT

CONNECTIONS

0103RX-V740_09-19_EN-GB.p65 03.2.12, 4:23 PM11

PHONO

CENTER

SUB

WOOFER

6CH INPUT

DIGITAL

OUTPUT

SIGNAL

GND

DIGITAL

INPUT

VIDEOAUDIOAUDIO

MD/CD-R

DVD

D-TV/CBL

OPTICAL

COAXIAL

VCR-1

OUT

MONITOR OUT

OUT

VCR 2

/DVR

DVD

D-TV

/CBL

/CD-R

OUT

(REC)

(PLAY)

SURROUND

MAIN

S VIDEOVIDEO

TUNER

75Ω UNBAL.

ANT

GND

ANT

DVD

COMPORNENT V

D-TV

/CBL

MONITOR

OUT

OPTICAL

INPUT

OPTICAL

OUTPUT

GND

OUTPUT

COAXIAL

OUTPUT

Connecting audio components

■ Connecting a CD player

Connect the coaxial digital output jack on your CD player

to the DIGITAL INPUT CD jack on this unit.

• Use the AUDIO jacks on this unit for a CD player which does

not have coaxial digital output jack.

■ Connecting a CD recorder or MD

recorder

Connect the optical digital signal input jack on your CD

recorder or MD recorder to the DIGITAL OUTPUT MD/

CD-R jack on this unit for digital recording.

Connect the optical digital output jack on your CD

recorder or MD recorder to the DIGITAL INPUT MD/

CD-R jack on this unit to play a source from your

recording component.

• Use the AUDIO jacks on this unit for a CD recorder or MD

recorder which does not have optical digital input or output

jack.

indicates signal direction

Turntable

CD player

Notes

• Once you have connected a recording component to this unit,

keep its power turned on while using this unit. If the power is

off, this unit may distort the sound from other components.

• The DIGITAL OUTPUT jack and analog OUT (REC) jacks

are independent. The DIGITAL OUTPUT jack only outputs

digital signals, while the OUT (REC) jacks output analog

signals only.

■ Connecting a turntable

Connect the output jacks on your turntable to the PHONO

jacks on this unit.

PHONO jacks are for connecting a turntable with an MM

or high-output MC cartridge. If you have a turntable with

a low-output MC cartridge, use an in-line boosting

transformer or MC-head amplifier when connecting to

these jacks.

• Connect your turntable to the GND terminal to reduce noise in

the signal. Please note that this connection may increase noise

with some record players.

indicates coaxial cables

indicates optical cables

CD recorder or

MD recorder

CONNECTIONS

0103RX-V740_09-19_EN-GB.p65 03.2.12, 4:23 PM12

English

PREPARATION

■ Connecting the AM loop antenna

1 Set up the AM loop antenna, then connect it

to the terminals on this unit.

2 Press and hold the tab to insert the AM loop

antenna lead wires into the AM ANT and

GND terminals.

3 Orient the AM loop antenna for the best

reception.

Notes

• The AM loop antenna should be placed away from this unit.

• The AM loop antenna should always be connected, even if an

outdoor AM antenna is connected to this unit.

A properly installed outdoor antenna provides clearer

reception than an indoor one. If you experience poor

reception quality, an outdoor antenna may improve the

quality. Consult the nearest authorized YAMAHA

dealer or service center about the outdoor antennas.

FREQUENCY STEP switch (China and General

models only)

Because the inter-station frequency

spacing differs in different areas, set the

FREQUENCY STEP switch (located on

the rear panel) according to the frequency

spacing in your area.

North, Central and South America:

100 kHz/10 kHz

Other areas: 50 kHz/9 kHz

Before setting this switch, disconnect the

AC power plug of this unit from the AC

outlet.

100kHz/10kHz

FREQUENCY

STEP

50kHz/9kHz

FM/AM

Ground (GND terminal)

For maximum safety and minimum

interference, connect the antenna GND

terminal to a good earth ground. A good

earth ground is a metal stake driven into

moist earth.

Indoor FM

antenna

(included)

AM loop antenna

(included)

Connecting the antennas

Open the cover of the

included 75-ohm/300-ohm

antenna adapter.

Cut the external sleeve

of the 75-ohm coaxial

cable and prepare it for

connection.

Cut the lead wire and

remove it.

Insert the cable wire into the

slot, and clamp it with pliers.

Snap the cover into

place.

Unit:

mm (inch)

Lead wire

Clamp with

pliers.

Clamp

with

pliers.

Insert the wire

into the slot.

75-ohm/300-ohm antenna adapter (U.K. model only)

11 (7/16)

8 (5/16)

6 (1/14)

TUNER

75Ω UNBAL.

ANT

GND

ANT

Both AM and FM indoor antennas are included with this

unit. In general, these antennas should provide sufficient

signal strength.

Connect each antenna correctly to the designated

terminals.

CONNECTIONS

0103RX-V740_09-19_EN-GB.p65 03.2.12, 4:23 PM13

Connecting an external amplifier

If you want to increase the power output to the speakers,

or want to use another amplifier, connect an external

amplifier to the OUTPUT jacks as follows.

Note

• When RCA pin plugs are connected to the OUTPUT jacks for

output to an external amplifier, the SPEAKERS terminals also

output signals.

1 MAIN jacks

Main channel line output jacks.

Note

• The signals output through these jacks are affected by the

BASS and TREBLE settings.

2 REAR (SURROUND) jacks

Rear channel line output jacks.

3 CENTER jack

Center channel line output jack.

4 REAR CENTER jack

Rear center channel line output jack.

5 SUBWOOFER jack

When using a subwoofer with built-in amplifier, including

the YAMAHA Active Servo Processing Subwoofer

System, connect the input jack of the subwoofer system

to this jack. Low bass signals distributed from the main,

center and/or rear channels are directed to this jack in

accordance with your SPEAKER SET selections. The

unit also directs the LFE (low-frequency effect) signals

generated when Dolby Digital or DTS is decoded to this

jack based on your SPEAKER SET selections.

Notes

• The cut-off frequency of the SUBWOOFER jack is 90 Hz.

• If you do not use a subwoofer, allocate the signals to the main

left and right speakers by changing the settings of “SOUND 1

SPEAKER SET” item “1E BASS” on the set menu.

• Use the control on the subwoofer to adjust its volume level.

You can also adjust the volume level by using this unit’s

remote control (see “SETTING THE SPEAKER LEVELS” on

page 53).

Connecting an external decoder

This unit is equipped with 6 additional input jacks (MAIN

left and right, CENTER, SURROUND left and right and

SUBWOOFER) for discrete multi-channel input from a

component equipped with a multi-channel decoder and 6

channel output jacks such as a DVD/SACD player.

Note

• When you select 6CH INPUT as the input source, the unit

automatically turns off the digital sound field processor, and

you cannot use DSP programs.

CENTER

SUB

WOOFER

REAR

CENTER

REAR

(SURROUND

)MAIN

OUTPUT

12 3

CONNECTIONS

CENTER

SUB

WOOFER

6CH INPUT

MONITOR OUT

OUT

VCR 2

/DVR

SURROUND

MAIN

S VIDEOVIDEO

L R LR

CENTER

SUBWOOFER MAIN

SURROUND

DVD/SACD player

0103RX-V740_09-19_EN-GB.p65 03.2.12, 4:23 PM14

English

PREPARATION

■ Speaker placement

Refer to the following diagram when you place the

speakers.

Main speakers

Place the main left and right speakers an equal distance

from the ideal listening position. The distance between

each speaker and each side of the video monitor should

also be the same.

Center speaker

Align the front face of the center speaker with the front

face of your video monitor. Place the speaker as close to

the monitor as possible (such as directly over or under the

monitor) and centrally between the main speakers.

Rear speakers

Place these speakers behind your listening position,

facing slightly inwards, about 1.8 m (6 feet) above the

floor.

Rear center speaker

Place the rear center speaker in the center between the

rear left and right speakers at the same height from the

floor as the rear speakers.

Subwoofer

The position of the subwoofer is not so critical, because

low bass sounds are not highly directional. However, it is

better to place the subwoofer near the main speakers.

Turn it slightly toward the center of the room to reduce

wall reflections.

Note

• If you do not use any of effect speakers (rear, center and/or

rear center), change the settings of “SOUND 1 SPEAKER

SET” items at the set menu to direct signals to other terminals

you have connected speakers to.

CAUTION

Use magnetically shielded speakers. If these speakers

still create interference with the monitor, place the

speakers away from the monitor.

Connecting the speakers

■ Speakers

This unit has been designed to provide the best sound-

field quality with a 6-speaker system, using main left and

right speakers, rear left and right speakers, a center

speaker, and a rear center speaker. If you use different

brands of speakers (with different tonal qualities) in your

system, the tone of a moving human voice and other types

of sound may not shift smoothly. We recommend that you

use speakers from the same manufacturer or speakers

with the same tonal quality.

The main speakers are used for the main source sound

plus effect sounds. They will probably be the speakers

from your present stereo system. The rear speakers are

used for effect and surround sounds. The center speaker is

for the center sounds (dialog, vocals, etc.). The rear center

speaker supplements the rear (left and right) speakers and

provides for more realistic front-to-back transitions.

The main speakers should be high-performance models

and have enough power-handling capacity to accept the

maximum output of your audio system. The other

speakers do not have to be equal to the main speakers. For

precise sound localization, however, it is ideal to use the

models of equivalent performance with the main

speakers.

Use of a subwoofer expands your sound field

It is also possible to further expand your system with the

addition of a subwoofer. The use of a subwoofer is

effective not only for reinforcing bass frequencies from

any or all channels, but also for reproducing the LFE

(low-frequency effect) channel with high fidelity when

playing back Dolby Digital or DTS signals. The

YAMAHA Active Servo Processing Subwoofer System is

ideal for natural and lively bass reproduction.

Main

speaker (L)

1.8 m (6 feet)

Rear speaker (L)

Rear center

speaker

Rear speaker (R)

Subwoofer

Main speaker (R)

Center speaker

CONNECTIONS

0103RX-V740_09-19_EN-GB.p65 03.2.12, 4:23 PM15

■ Connections

Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) in accordance with the markers on

this unit, the speakers, and the speaker cables. If the connections are faulty, no sound will be heard from the speakers,

and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass.

CAUTION

• Use speakers with the specified impedance shown on the rear panel of this unit.

• Do not let the bare speaker wires touch each other or any metal part of this unit. This could damage this unit

and/or the speakers.

10 mm (3/8”)

Red: positive (+)

Black: negative (–)

Banana plug

(With the exception of U.K. and Europe models)

CONNECTIONS

A speaker cord is actually a pair of insulated cables

running side by side. One cable is colored or shaped

differently, perhaps with a stripe, groove or ridge.

1 Remove approximately 10 mm (3/8”) of

insulation from each of the speaker cables.

2 Twist the exposed wires of the cable

together to prevent short circuits.

3 Unscrew the knob.

4 Insert one bare wire into the hole in the side

of each terminal.

5 Tighten the knob to secure the wire.

(With the exception of U.K. and Europe models)

• You can also use banana plug connectors. First, tighten the

knob and then insert the banana plug connector into the end of

the corresponding terminal.

MAIN

CENTER

REAR CENTER

REAR

A OR B :

A+B :

4ΩMIN.

8ΩMIN.

6ΩMIN.

/SPEAKER

IMPEDANCE SELECTOR

SET BEFORE POWER ON

MAIN

CENTER

REAR CENTER

REAR

A OR B :

A+B :

8ΩMIN.

16ΩMIN.

8ΩMIN.

/SPEAKER

■ IMPEDANCE SELECTOR switch

WARNING

Do not change setting of the IMPEDANCE SELECTOR switch when the unit power is switched on, as doing so may

damage the unit. If this unit fails to turn on when STANDBY/ON (or SYSTEM POWER) is pressed, the

IMPEDANCE SELECTOR switch may not be fully slid to either position. If this is the case, slide the switch all the

way to either position when this unit is in standby mode. Be sure to move this switch only when this unit is in

standby mode.

Select the switch position (left or right) according to the impedance of the speakers in your system.

IMPEDANCE SELECTOR

switch

(General model)

Switch

position

Left

Right

Speaker

Main

Center,

Rear Center,

Rear

Main*

Center,

Rear Center,

Rear

Impedance level

If you use one/two set(s) of main speakers, the impedance of

each speaker must be 4 Ω/8 Ω or higher.

The impedance of each speaker must be 6 Ω or higher.

If you use one/two set(s) of main speakers, the impedance of

each speaker must be 8 Ω/16 Ω or higher.

The impedance of each speaker must be 8 Ω or higher.

* [Canada model only]

When the switch is set to right, you cannot use “A+B”.

0103RX-V740_09-19_EN-GB.p65 03.2.12, 4:23 PM16

English

PREPARATION

PHONO

MAIN

REAR

(SURROUND)

REAR

CENTER

R L

CENTER

SUB

WOOFER

6CH INPUT

DIGITAL

OUTPUT

SIGNAL

GND

DIGITAL

INPUT

VIDEOAUDIOAUDIO

MD/CD-R

DVD

D-TV/CBL

OPTICAL

COAXIAL

VCR-1

OUT

MONITOR OUT

OUT

VCR 2

/DVR

DVD

D-TV

/CBL

/CD-R

OUT

(REC)

(PLAY)

SURROUND

MAIN

S VIDEOVIDEO

TUNER

75Ω UNBAL.

ANT

GND

ANT

CENTER

SUB

WOOFER

REAR

CENTER

REAR

(SURROUND

)

MAIN

OUTPUT

DVD

COMPORNENT VIDEO

MAIN

CENTER

REAR CENTER

REAR

A OR B :

A+B :

4ΩMIN.

8ΩMIN.

6ΩMIN.

/SPEAKER

SPEAKERS

IMPEDANCE SELECTOR

SET BEFORE POWER ON

R L

D-TV

/CBL

MONITOR

OUT

MAIN

CENTER

REAR CENTER

REAR

A OR B :

A+B :

8ΩMIN.

16ΩMIN.

8ΩMIN.

/SPEAKER

4231

Subwoofer

system

Rear center

speaker

Main B speaker

Center

speaker

Right

Rear speaker

SUBWOOFER jack

When using a subwoofer with built-in amplifier, including the YAMAHA Active Servo Processing Subwoofer System,

connect the input jack of the subwoofer system to this jack. This unit will direct low bass signals distributed from the

main, center and/or rear channels to this jack in accordance with your SPEAKER SET selections. The LFE (low-

frequency effect) signals generated when Dolby Digital or DTS is decoded are also directed to this jack in accordance

with your SPEAKER SET selections.

Notes

• The cut-off frequency of the SUBWOOFER jack is 90 Hz.

• If you do not use a subwoofer, allocate the signals to the main left and right speakers by changing the setting of “SOUND 1

SPEAKER SET” item “1E BASS” on the set menu to MAIN.

• Use the control on the subwoofer to adjust its volume level. You can also adjust the volume level by using this unit’s remote control

(see “SETTING THE SPEAKER LEVELS” on page 53).

Right

Left

Main A speaker

Right Left Left

MAIN SPEAKERS terminals

You can connect up to two speaker systems to these

terminals. When using only one speaker system, connect

it to either of the MAIN A or the MAIN B terminals.

REAR SPEAKERS terminals

A rear speaker system can be connected to these

terminals.

CENTER SPEAKER terminals

A center speaker can be connected to these terminals.

REAR CENTER SPEAKER terminals

A rear center speaker can be connected to these terminals.

CONNECTIONS

The diagram shows the speaker layout in the listening

room.

0103RX-V740_09-19_EN-GB.p65 03.2.12, 4:23 PM17

Connecting the power supply

cords

■ Connecting the AC power cord

Plug in this unit to a wall outlet.

■ AC OUTLETS (SWITCHED)

U.S.A., Canada, China, Europe, Singapore and

General models .............................................. 2 OUTLETS

U.K. and Australia model ................................ 1 OUTLET

Use these outlets to connect the power cords from your

components to this unit. The power to the AC OUTLETS

is controlled by this unit’s STANDBY/ON (or SYSTEM

POWER and STANDBY). These outlets will supply

power to any source component connected to this unit

whenever this unit is turned on. The maximum power

(total power consumption of components) that can be

connected to the AC OUTLETS varies depending on the

area which it was purchasing.

China and General models......................................... 50 W

Other models ......................................................... 100 W

■ VOLTAGE SELECTOR

(China and General models only)

The VOLTAGE SELECTOR on the rear panel of this unit

must be set for your local main voltage BEFORE

plugging into the AC main supply. Voltages are 110/120/

220/240 V AC, 50/60 Hz.

VOLTAGE SELECTOR

Turning on the power

When all connections are complete, turn on the power of

this unit.

1 Press STANDBY/ON (SYSTEM POWER on

the remote control) to turn on the power of

this unit.

The level of the main volume, and then the current

DSP program name appear on the front panel

display.

STANDBY

/ON

POWER

SYSTEM

Remote control

Front panel

(General model)

REAR

CENTER

AC OUTLETS

SWITCHED

MAIN

CENTER

REAR CENTER

REAR

A OR B :

A+B :

4ΩMIN.

8ΩMIN.

6ΩMIN.

/SPEAKER

IMPEDANCE SELECTOR

SET BEFORE POWER ON

MAIN

CENTER

REAR CENTER

REAR

A OR B :

A+B :

8ΩMIN.

16ΩMIN.

8ΩMIN.

/SPEAKER

VOLTAGE

SELECTOR

INPUT

AUTO/MANUAL MONO

MAN`L/AUTO FM

TUNING MODE MEMORY

EDIT

PRESET/TUNING FM/AM

OPTICALRAUDIOLVIDEOS VIDEO

EFFECT

PRESET/TUNING

A/B/C/D/E

PROGRAMSTEREOSPEAKERS

6CH INPUTINPUT MODE

SILENT

PHONES

TREBLE

VOLUME

BASS

VIDEO AUX

STANDBY

/ON

SET MENU

TRANSMIT

NAME

CLEAR

CODE SET

SYSTEM

POWER

STANDBY

6CH INPUT

SLEEP

PHONO

AUX

TV/CBL VCR 1 VCR2/DVR DVD

TUNER

CD-R

SELECT

POWER

AMP

POWER

CONNECTIONS

0103RX-V740_09-19_EN-GB.p65 03.2.12, 4:23 PM18

La pagina sta caricando ...

Yamaha RX-V740RDS Manuale del proprietario

Marca: Yamaha

Modello: RX-V740RDS

Categoria: Ricevitori AV

Tipo: Manuale del proprietario

Scarica il pdf

rapporto

in altre lingue

English: Yamaha RX-V740RDS Owner's manual
français: Yamaha RX-V740RDS Le manuel du propriétaire
Deutsch: Yamaha RX-V740RDS Bedienungsanleitung
Nederlands: Yamaha RX-V740RDS de handleiding
dansk: Yamaha RX-V740RDS Brugervejledning
svenska: Yamaha RX-V740RDS Bruksanvisning
Türkçe: Yamaha RX-V740RDS El kitabı
română: Yamaha RX-V740RDS Manualul proprietarului

Yamaha RX-V740RDS Manuale del proprietario

Yamaha RX-V740RDS Manuale del proprietario

in altre lingue

Documenti correlati