Salora 22LED9109CTS2DVD Operating Instructions Manual

Marca: Salora

Modello: 22LED9109CTS2DVD

Categoria: TV LCD

Tipo: Operating Instructions Manual

22LED9109CTS2DVD

OPERATING INSTRUCTIONS

MODE D'EMPLOI

GEBRUIKSAANWIJZING

COLOUR TELEVISION WITH REMOTE CONTROL

TELEVISEUR COULEUR A TELECOMMANDE

KLEURENTELEVISIE MET AFSTANDSBEDIENING

BEDIENUNGSANLEITUNG

FARBFERNSEHGERÄT MIT FERNBEDIENUNG

50432052

English - 59 -

Contents

Safety Information ................................................. 60

Markings on the Product........................................ 60

Environmental Information..................................... 61

Features ................................................................ 62

Accessories Included............................................. 62

Standby Notications ............................................. 62

TV Control Switch & Operation.............................. 62

Inserting the Batteries into the Remote ................. 63

Connect Power ..................................................... 63

Antenna Connection .............................................. 63

License Notication ............................................... 63

Specication .......................................................... 64

Remote Control ..................................................... 65

Connections........................................................... 66

Switching On/Off .................................................... 67

First Time Installation............................................. 67

Media Playback via USB Input .............................. 68

Recording a Programme ....................................... 68

Timeshift Recording ............................................... 68

Instant Recording .................................................. 69

Watching Recorded Programmes ........................ 69

Recording Conguration ........................................ 69

Media Browser Menu............................................. 69

CEC and CEC RC Passthrough ............................ 69

TV Menu Contents................................................. 71

General TV Operation ........................................... 75

Using the Channel List .......................................... 75

Conguring Parental Settings ................................ 75

Electronic Programme Guide (EPG) ..................... 75

Teletext Services ................................................... 76

Software Upgrade.................................................. 76

Troubleshooting & Tips .......................................... 76

PC Input Typical Display Modes ............................ 77

AV and HDMI Signal Compatibility ........................ 77

Supported File Formats for USB Mode ................. 78

Supported DVI Resolutions ................................... 79

DVD Mode ............................................................. 80

Overview of the Remote Control ........................... 83

General DVD Operation (depending on model) .... 84

Mobil TV Instructions ............................................. 85

English - 60 -

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO

NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

Note: Follow the on screen instructions for operating the related

features.

In extreme weather (storms, lightning) and long inactivity

periods (going on holiday) disconnect the TV set from the

mains.

The mains plug is used to disconnect TV set from the mains

and therefore it must remain readily operable. If the TV set is

not disconnected electrically from the mains, the device will

still draw power for all situations even if the TV is in standby

mode or switched off.

IMPORTANT - Please read these

instructions fully before installing or

operating

WARNING: Never let people (including

children) with reduced physical, sensory or

mental capabilities or lack of experience and / or

knowledge use electrical devices unsupervised.

• Use this TV set at an altitude of less than 2000 meters

above the sea level, in dry locations and in regions

with moderate or tropical climates.

• The TV set is intended for household and similar

general use but may also be used in public places.

• For ventilation purposes, leave at least 5cm of free

space around the TV.

• The ventilation should not be impeded by covering

or blocking the ventilation openings with items, such

as newspapers, table-cloths, curtains, etc.

• The power cord plug should be easily accessible. Do

not place the TV, furniture, etc. on the power cord.

A damaged power cord/plug can cause re or give

you an electric shock. Handle the power cord by the

plug, do not unplug the TV by pulling the power cord.

Never touch the power cord/plug with wet hands as

this could cause a short circuit or electric shock.

Never make a knot in the power cord or tie it with

other cords. When damaged it must be replaced, this

should only be done by qualied personnel.

• Do not expose the TV to dripping or splashing of

liquids and do not place objects lled with liquids,

such as vases, cups, etc. on or over the TV (e.g.,

on shelves above the unit).

• Do not expose the TV to direct sunlight or do not

place open ames such as lit candles on the top of

or near the TV.

• Do not place any heat sources such as electric

heaters, radiators, etc. near the TV set.

• Do not place the TV on the floor and inclined

surfaces.

• To avoid danger of suffocation, keep plastic bags

out of the reach of the babies, children and domestic

animals.

• Carefully attach the stand to the TV. If the stand is

provided with screws, tighten the screws rmly to

prevent the TV from tilting. Do not over-tighten the

screws and mount the stand rubbers properly.

• Do not dispose of the batteries in fire or with

hazardous or ammable materials.

Warning: Batteries must not be exposed to excessive

heat such as sunshine, re or the like.

Caution

Serious injury or death risk

Risk of electric shock

Dangerous voltage risk

Maintenance

Important maintenance

component

Markings on the Product

The following symbols are used on the product as a

marker for restrictions and precautions and safety

instructions. Each explanation shall be considered

where the product bears related marking only. Note

such information for security reasons.

Class II Equipment: This appliance is

designed in such a way that it does not require

a safety connection to electrical earth.

Class II Equipment With Functional

Earthing: This appliance is designed in such

a way that it does not require a safety

connection to electrical earth, the earth

connection is used for functional purposes.

Protective Earth Connection: The marked

terminal is intended for connection of the

protective earthing conductor associated with

the supply wiring.

Hazardous Live Terminal: The marked

terminal(s) is/are hazardous live under normal

operating conditions.

Caution, See Operating Instructions: The

marked area(s) contain(s) user replaceable

coin or button cell batteries.

Class 1 Laser Product:

This product contains

Class 1 laser source that

is safe under reasonably

foreseeable conditions of

operation.

CLASS 1

LASER PRODUCT

English - 61 -

WARNING

Do not ingest the battery, Chemical Burn Hazard

This product or the accessories supplied with the

product may contain a coin/button cell battery. If the

coin/button cell battery is swallowed, it can cause

severe internal burns in just 2 hours and can lead

to death.

Keep new and used batteries away from children.

If the battery compartment does not close securely,

stop using the product and keep it away from

children.

If you think batteries might have been swallowed or

placed inside any part of the body, seek immediate

medical attention.

WARNING

Never place a television set in unstable or inclined

locations. A television set may fall, causing serious

personal injury or death. Many injuries, particularly

to children, can be avoided by taking simple

precautions such as;

• Using cabinets or stands recommended by the

manufacturer of the television set.

• Only using furniture that can safely support the

television set.

• Ensuring the television set is not overhanging the

edge of the supporting furniture.

• Not placing the television set on tall furniture

(for example, cupboards or bookcases) without

anchoring both the furniture and the television set

to a suitable support.

• Not standing the television set on cloth or other

materials placed between the television and

supporting furniture.

• Educating children about the dangers of climbing

on furniture to reach the television set or its

controls. If your existing television set is being

retained and relocated, the same considerations

as above should be applied.

WALL MOUNTING WARNINGS

• Read the instructions before mounting your TV

on the wall.

• The wall mount kit is optional. You can obtain from

your local dealer, if not supplied with your TV.

• Do not install the TV on a ceiling or on an inclined

wall.

• Use the specied wall mounting screws and other

accessories.

• Tighten the wall mounting screws rmly to prevent

the TV from fall. Do not over-tighten the screws.

WARNING

Apparatus connected to the protective earthing

of the building installation through the MAINS

connection or through other apparatus with a

connection to protective earthing – and to a

television distribution system using coaxial cable,

may in some circumstances create a re hazard.

Connection to a television distribution system has

therefore to be provided through a device providing

electrical isolation below a certain frequency range

(galvanic isolator, see EN 60728-11)

Environmental Information

This television is designed to be environment friendly.

To reduce energy consumption, you can follow these

steps:

If you set the Energy Saving to Minimum, Medium,

Maximum or Auto the TV will reduce the energy

consumption accordingly. If you like to set the

Backlight to a xed value set as Custom and adjust

the Backlight (located under the Energy Saving

setting) manually using Left or Right buttons on the

remote. Set as Off to turn this setting off.

Note: Available Energy Saving options may differ depending

on the selected Mode in the System>Picture menu.

The Energy Saving settings can be found in the

System>Picture menu. Note that some picture

settings will be unavailable to be changed.

If pressed Right button while Auto option is selected

or Left button while Custom option is selected,

“Screen will be off in 15 seconds.” message will be

displayed on the screen. Select Proceed and press

OK to turn the screen off immediately. If you don’t

press any button, the screen will be off in 15 seconds.

Press any button on the remote or on the TV to turn

the screen on again.

Note: Screen Off option is not available if the Mode is set

to Game.

When the TV is not in use, please switch off or

disconnect the TV from the mains plug. This will also

reduce energy consumption.

English - 62 -

Features

• Remote controlled colour TV

• Fully integrated digital terrestrial/cable/satellite TV

(DVB-T2/C/S2)

• HDMI inputs to connect other devices with HDMI

sockets

• USB input

• OSD menu system

• Scart socket for external devices (such as DVD

Players, PVR, video games, etc.)

• Stereo sound system

• Teletext

• Headphone connection

• Automatic programming system

• Manual tuning

• Automatic power down after up to eight hours.

• Sleep timer

• Child lock

• Automatic sound mute when no transmission.

• NTSC playback

• AVL (Automatic Volume Limiting)

• PLL (Frequency Search)

• PC input

• Game Mode (Optional)

• Picture off function

• Programme recording

• Programme timeshifting

Accessories Included

• Remote Control

• Batteries: 2 x AAA

• Instruction Book

• DC 12 V Input Power Adaptor

• Car Plug

Standby Notications

If the TV does not receive any input signal (e.g. from

an aerial or HDMI source) for 3 minutes, it will go

into standby. When you next switch-on, the following

message will be displayed: “TV switched to stand-by

mode automatically because there was no signal

for a long time.” Press OK to continue.

If the TV is on and it isn’t being operated for a while

it will go into standby. When you next switch-on, the

following message will be displayed. “TV switched to

stand-by mode automatically because no operation

was made for a long time.” Press OK to continue.

TV Control Switch & Operation

1. Up direction

2. Down direction

3. Volume / Info / Sources List selection and

Standby-On switch

The Control button allows you to control the Volume/

Programme/Source and Standby-On functions of

the TV.

To change volume: Increase the volume by pushing

the button up. Decrease the volume by pushing the

button down.

To change channel: Press the middle of the button

in, the information banner will appear on the screen.

Scroll through the stored channels by pushing the

button up or down.

To change source: Press the middle of the button in

twice(for the second time in total), the source list will

appear on the screen. Scroll through the available

sources by pushing the button up or down.

To turn the TV off: Press the middle of the button in

and hold it down for a few seconds, the TV will turn

into standby mode.

To turn on the TV: Press the middle of the button in,

the TV will turn on.

Notes:

• If you turn the TV off, this circle starts again beginning

with the volume setting.

• Main menu OSD cannot be displayed via control

buttons.

Operation with the Remote Control

Press Menu button on your remote control to display

main menu screen. Use the directional buttons to select

a menu tab and press OK to enter. Use the directional

buttons again to select or set an item. Press Return/

Back button or Menu button to quit a menu screen.

Input Selection

Once you have connected external systems to your

TV, you can switch to different input sources. Press

Source button on your remote control consecutively

to select the different sources.

English - 63 -

Changing Channels and Volume

You can change the channel and adjust the volume

by using the Volume +/- and Programme +/- buttons

on the remote.

Inserting the Batteries into the Remote

Remove the back cover to reveal the battery

compartment. Insert two size AAA batteries. Make

sure the (+) and (-) signs match (observe correct

polarity). Do not mix old and new batteries. Replace

only with same or equivalent type. Place the cover

back on.

Connect Power

IMPORTANT: The TV set is designed to operate on 12

V DC. For this, an adaptor is used which gives 12 V

voltage. Connect this adaptor to a system that supplies

100-240V AC, 50/60Hz.

To POWER INPUT

DC 12 V terminal

AC adaptor

Important safety information

Be sure to ground the connection

properly

Connect the ground terminal of the AC

adaptor with the ground terminal provided at

the power outlet using the enclosed power

cord. If the provided plug does not t your

outlet, consult an electrician for replacement

of the obsolete outlet.

Surely connect the ground wire.

Antenna Connection

Connect the aerial or cable TV plug to the AERIAL

INPUT (ANT) socket or satellite plug to the SATELLITE

INPUT (LNB) socket located on the back of the TV.

satellite

REAR

THE TV

aerial

cable

License Notication

The terms HDMI and HDMI High-Denition Multimedia

Interface, and the HDMI Logo are trademarks or

registered trademarks of HDMI Licensing Administrator,

Inc. in the United States and other countries.

Manufactured under license from Dolby Laboratories.

Dolby, Dolby Audio and the double-D symbol are

trademarks of Dolby Laboratories.

Information for Users on Disposal of Old Equipment

and Batteries

[European Union only]

Equipment bearing these symbols should not be

disposed as general household waste.

You should look for appropriate recycling facilities and

systems for the disposal of these products.

Notice: The sign Pb below the symbol for batteries indicates

that this battery contains lead.

Products

Battery

English - 64 -

Specication

TV Broadcasting PAL B/G D/K K I/I’

Receiving Channels

VHF (BAND I/III) - UHF

(BAND U) - HYPERBAND

Digital Reception

Fully integrated digital

terrestrial-cable-satellite

TV(DVB-T-C-S)

(DVB-T2, DVB-S2

compliant)

Number of Preset

Channels

8 000

Channel Indicator On Screen Display

RF Aerial Input 75 Ohm (unbalanced)

Operating Voltage 100-240V AC, 50Hz.

Audio German+Nicam Stereo

Audio Output Power

(WRMS.) (10% THD)

2 x 2,5

Power Consumption (W) 47 W

TV Dimensions DxLxH

(with foot) (mm)

134 x 516 x 352

TV Dimensions DxLxH

(without foot) (mm)

35 x 516 x 317

Display 22”

Operation temperature

and operation humidity

0ºC up to 40ºC, 85%

humidity max

English - 65 -

Remote Control

.,/@

LANG.

BACK

EXIT

(*) MY BUTTON 1 & MY BUTTON 2:

These buttons may have default functions depending on the

model. However you can set a special function to these buttons

by pressing on them for ve seconds when on a desired source

or channel. A conrmation message will be displayed on the

screen. Now the selected MY BUTTON is associated with

the selected function.

Note that if you perform First Time Installation, MY BUTTON

1&2 will return to their default function.

1. Standby: Switches On / Off the TV

2. Numeric buttons: Switches the channel, enters a

number or a letter in the text box on the screen.

3. TV: Displays channel list / Switches to TV Source

4. Mute: Completely turns off the volume of the TV

5. Volume +/-

6. Menu: Displays TV menu

7. Directional buttons: Helps navigate menus, content

etc. and displays the subpages in TXT mode when

pressed Right or Left

8. OK: Conrms user selections, holds the page (in TXT

mode), views channel list (DTV mode)

9. Back/Return: Returns to previous screen, opens index

page (in TXT mode)

10. Media browser: Opens the media browsing screen

11. Info: Displays information about on-screen content,

shows hidden information (reveal - in TXT mode)

12. My button 1 (*)

13. Coloured Buttons: Follow the on-screen instructions

for coloured button functions

14. Language: Switches among sound modes (analogue

TV), displays and changes audio/subtitle language

(digital TV, where available)

15. Subtitles: Turns subtitles on and off (where available)

16. Rapid reverse: Moves frames backwards in media

such as movies

17. Record: Records programmes

18. Play: Starts to play selected media

19. Stop: Stops the media being played

20. Rapid advance: Moves frames forward in media such

as movies

21. Pause: Pauses the media being played, starts timeshift

recording

22. Screen: Changes the aspect ratio of the screen

23. Text: Displays teletext (where available), press again

to superimpose the teletext over a normal broadcast

picture (mix)

24. My button 2 (*)

25. EPG (Electronic programme guide): Displays the

electronic programme guide

26. Exit: Closes and exits from displayed menus or returns

to previous screen

27. Quick Menu: Displays a list of menus for quick access

28. No function

29. Programme +/-

30. Swap: Quickly cycles between previous and current

channels or sources

31. Source: Shows all available broadcast and content

sources

English - 66 -

Connections

Connector Type Cables Device

Scart

Connection

(back)

VGA

Connection

(back)

SIDE AV

PC/YPbPr

Audio

Connection

(side)

YPbPr/PC Audio Cable

HDMI

Connection

(back)

SPDIF

(Coaxial Out)

Connection

(back)

SIDE AV

Side AV

(Audio/Video)

Connection

(side)

AV Cable

HEADPHONE

Headphone

Connection

(side)

PC to YPBPR

YPbPr Video

Connection

(back)

PC to YPbPr Connection Cable

USB

Connection

(side)

Connection

(side)

CAM

module

12V DC

Connection

(back)

DC 12V Input

NOTE: When connecting a

device via the YPbPr or Side

AV input, you must use the

connection cables to enable

connection. See the illustrations

on the left side. You can use

YPbPr to VGA cable to enable

YPbPr signal via VGA input.

You cannot use VGA and YPbPr

at the same time. To enable

PC/YPbPr audio, you will need

to use the side audio inputs

with a YPbPr/PC audio cable

for audio connection. If an

external device is connected via

the SCART socket, the TV will

automatically switch to AV mode.|

When receiving DTV channels

(Mpeg4 H.264) or while in Media

Browser mode, output will not be

available via the scart socket.

When using the wall mounting

kit (available from third party

in the market, if not supplied),

we recommend that you plug all

your cables into the back of the

TV before mounting on the wall.

Insert or remove the CI module

only when the TV is SWITCHED

OFF. You should refer to the

module instruction manual for

details of the settings. The/Each

USB input of your TV supports

devices up to 500mA. Connecting

devices that have current value

above 500mA may damage your

TV. By connecting an HDMI cable

to your TV, you have to use only a

shielded HDMI cable to guarantee

a sufficient immunity against

parasitic frequency radiation.

If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making

any connection. After the connection is done, you can turn on the units and use them.

English - 67 -

Switching On/Off

To Switch the TV On

Connect the power cord to a power source such as a

wall socket (100-240V AC, 50/60 Hz).

To switch on the TV from standby mode either:

• Press the Standby button, Programme +/- or a

numeric button on the remote control.

• Press the side function switch on the TV until the TV

comes on from standby.

To Switch the TV Off

Press the Standby button on the remote control or

press the side function switch on the TV until the TV

switches into standby mode.

To power down the TV completely, unplug the

power cord from the mains socket.

Note: When the TV is switched into standby mode, the standby

LED can blink to indicate that features such as Standby

Search, Over Air Download or Timer is active. The LED can

also blink when you switch on the TV from standby mode.

First Time Installation

When turned on for the first time, the language

selection screen is displayed. Select the desired

language and press OK.

On the next screen, set your preferences using the

directional buttons.

Notes: Depending on the Country selection you may be asked

to set and conrm a PIN at this point. The selected PIN cannot

be 0000. You have to enter it if you are asked to enter a PIN

for any menu operation later.

M7(*) operator type will be dened according to the Language

and Country selections that you made in the First Time

Installation.

(*) M7 is a digital satellite service provider.

About Selecting Broadcast Type

Digital Aerial: If Digital Aerial broadcast search

option is turned on, the TV will search for digital

terrestrial broadcasts after other initial settings are

completed.

Digital Cable: If Digital Cable broadcast search

option is turned on, the TV will search for digital cable

broadcasts after other initial settings are completed.

According to your other preferences a conrmation

message may be displayed before starting to search.

Select YES and press OK to proceed. To cancel

operation, select NO and press OK. You can select

Network or set values such as Frequency, Network

ID and Search Step. When nished, press OK button.

Note: Searching duration will change depending on the

selected Search Step.

Satellite: If Satellite broadcast search option is turned

on, the TV will search for digital satellite broadcasts

after other initial settings are completed. Before

satellite search is performed some settings should be

made. Before the satellite search starts, a menu will be

displayed where you can select to start an M7 operator

installation or a standard installation. To start an M7

operator installation set the Install Type as Operator

and the Satellite Operator as the related M7 operator.

Then highlight Preferred Scan option and set as

Automatic channel scan and press OK to start the

automatic search. These options can be preselected

depending on the Language and Country selections

that you made in the earlier steps of the rst time

installation process. You may be asked to select HD/

SD or country specic channel list according to your

M7 operator type. Select one and press OK to proceed.

Wait till the scan is nished. Now the list has been

installed.

While performing an M7 operator installation, if you

want to use the satellite installation parameters that

differ from the default settings select the Preferred

Scan option as Manual channel scan and press the

OK button to proceed. Antenna Type menu will be

displayed next.

In order to search for satellite channels other than

M7 channels you should start a standard installation.

Select the Install Type as Standard and press the

OK button to proceed. Antenna Type menu will be

displayed next.

There are three types of antenna selection. You can

select Antenna Type as Direct, Single Satellite Cable

or DiSEqC switch by using “ ” or “ ” buttons.

• Direct: If you have a single receiver and a direct

satellite dish, select this antenna type. Press OK to

continue. Select an available satellite on the next

screen and press OK to scan for services.

• Single Satellite Cable: If you have multiple

receivers and a single satellite cable system, select

this antenna type. Press OK to continue. Congure

settings by following instructions on the next screen.

Press OK to scan for services.

• DiSEqC switch: If you have multiple satellite dishes

and a DiSEqC switch, select this antenna type. Then

set the DiSEqC version and press OK to continue.

You can set up to four satellites (if available) for

version v1.0 and sixteen satellites for version v1.1

on the next screen. Press OK button to scan the rst

satellite in the list.

Analogue: If Analogue broadcast search option is

turned on, the TV will search for analogue broadcasts

after other initial settings are completed.

Additionally you can set a broadcast type as your

favourite one. Priority will be given to the selected

broadcast type during the search process and the

channels of it will be listed on the top of the Channel

List. When nished, press OK to continue.

You can activate Store Mode option at this point.

This option will congure your TV’s settings for store

English - 68 -

environment and depending on the TV model being

used, the supported features of it may be displayed

on the top of the screen as an info banner. This option

is intended only for store use. It is recommended to

select Home Mode for home use. This option will be

available in System>Settings>More menu and can

be turned off/on later.

Press OK button on the remote control to continue.

After the initial settings are completed TV will start

to search for available broadcasts of the selected

broadcast types.

After all the available stations are stored, scan results

will be displayed. Press OK to continue. The Edit

Channel List menu will be displayed next. You can

edit the channel list according to your preferences or

press the Menu button to quit and watch TV.

While the search continues a message may appear,

asking whether you want to sort channels according

to the LCN(*). Select Yes and press OK to conrm.

(*) LCN is the Logical Channel Number system that organizes

available broadcasts in accordance with a recognizable

channel number sequence (if available).

Notes:

To search for M7 channels after the First Time Installation,

you should perform the rst time installation again. Or press the

Menu button and enter the Installation>Automatic Channel

Scan>Satellite menu. Then follow the same steps mentioned

abow in the satellite section.

Do not turn off the TV while initializing rst time installation.

Note that, some options may not be available depending on

the country selection.

Media Playback via USB Input

You can connect 2.5” and 3.5” inch (hdd with external power

supply) external hard disk drives or USB memory stick to your

TV by using the USB inputs of the TV.

IMPORTANT! Back up the les on your storage devices

before connecting them to the TV. Manufacturer will

not be responsible for any le damage or data loss.

Certain types of USB devices (e.g. MP3 Players)

or USB hard disk drives/memory sticks may not be

compatible with this TV. The TV supports FAT32 and

NTFS disk formatting but recording will not be available

with NTFS formatted disks.

While formatting USB hard drives which have

more than 1TB (Tera Byte) storage space you may

experience some problems in the formatting process.

Wait a little while before each plugging and unplugging

as the player may still be reading les . Failure to do

so may cause physical damage to the USB player

and the USB device itself. Do not pull out your drive

while playing a le.

You can use USB hubs with your TV’s USB inputs.

External power supplied USB hubs are recommended

in such a case.

It is recommended to use the TV’s USB input(s)

directly, if you are going to connect a USB hard disk.

Note: When viewing image les the Media Browser menu

can only display 1000 image les stored on the connected

USB device.

Recording a Programme

IMPORTANT: When using a new USB hard disk

drive, it is recommended that you rst format the disk

using your TV’s “Format Disk” option in the Media

Browser>Settings>Recording Settings menu.

To record a programme, you should rst connect a USB

disk to your TV while the TV is switched off. You should

then switch on the TV to enable the recording feature.

To use recording your USB drive should have 2 GB free

space and be USB 2.0 compatible. If the USB drive is

not compatible an error message will be displayed.

To record long duration programmes such as movies, it

is recommended to use USB Hard disk drives (HDD’s).

Recorded programmes are saved into the connected

USB disk. If desired, you can store/copy recordings

onto a computer; however, these les will not be

available to be played on a computer. You can play

the recordings only via your TV.

Lip Sync delay may occur during the timeshifting. Radio

record is supported. The TV can record programmes

up to ten hours.

Recorded programmes are split into 4GB partitions.

If the writing speed of the connected USB disk is not

sufcient, the recording may fail and the timeshifting

feature may not be available.

It is recommended to use USB hard disk drives for

recording HD programmes.

Do not pull out the USB/HDD during a recording. This

may harm the connected USB/HDD.

Multipartition support is available. A maximum of two

different partitions are supported. The rst partition of

the USB disk is used for PVR ready features. It also

must be formatted as the primary partition to be used

for the PVR ready features.

Some stream packets may not be recorded because

of signal problems, as a result sometimes videos may

freeze during playback.

Record, Play, Pause, Display (for PlayListDialog) keys

can not be used when teletext is on. If a recording starts

from timer when teletext is on, teletext is automatically

turned off. Also teletext usage is disabled when there

is an ongoing recording or playback.

Timeshift Recording

Press Pause button while watching a broadcast to

activate timeshifting mode. In timeshifting mode, the

programme is paused and simultaneously recorded to

the connected USB disk.

English - 69 -

Press Play button again to resume the paused

programme from where you stopped. Press the Stop

button to stop timeshift recording and return to the

live broadcast.

Timeshift cannot be used while in radio mode.

You cannot use the timeshift fast reverse feature before

advancing the playback with the fast forward option.

Instant Recording

Press Record button to start recording an event

instantly while watching a programme. You can press

Record button on the remote control again to record

the next event after selecting the next programme

from within the EPG. Press Stop button to cancel

instant recording.

You can not switch broadcasts or view the Media

Browser during the recording mode. While recording a

programme or during the timeshifting, a warning message

appears on the screen if your USB device speed is not

sufcient.

Watching Recorded Programmes

Select the Recordings from the Media Browser

menu. Select a recorded item from the list (if previously

recorded). Press the OK button to view the Play

Options. Select an option then press OK button.

Press the Stop button to stop a playback and return

to the Recordings.

Slow Forward

If you press Pause button while watching recorded

programmes, the slow forward feature will be available.

You can use Rapid advance button to slow forward.

Pressing Rapid advance button consecutively will

change slow forwarding speed.

Note: Viewing main menu and menu items will not be available

during the playback. Please also note that previously set

recording timer/s will not function while using the Recordings

menu.

Recording Conguration

Select the Recording Settings item in the Media

Browser>Settings menu to congure the recording

settings.

Format Disk: You can use the Format Disk feature

for formatting the connected USB disk. Your PIN is

required to use the Format Disk feature.

Note: Default PIN can be set to 0000 or 1234. If you have

defined the PIN(is requested depending on the country

selection) during the First Time Installation use the PIN that

you have dened.

IMPORTANT: Formatting your USB drive will erase

ALL the data on it and it’s le system will be converted

to FAT32. In most cases operation errors will be xed

after a format but you will lose ALL your data.

If “USB disk writing speed too slow to record”

message is displayed on the screen while starting a

recording, try restarting the recording. If you still get

the same error, it is possible that your USB disk does

not meet the speed requirements. Try connecting

another USB disk.

Media Browser Menu

You can play photo, music, and movie les stored on a

USB disk by connecting it to your TV. Connect a USB

disk to one of the USB inputs located on the side of

the TV. Pressing the Menu button while in the Media

Browser mode will access the Picture, Sound and

Settings menu options. Pressing the Menu button

again will exit from this screen. You can set your Media

Browser preferences by using the Settings Menu.

Loop/Shufe Mode Operation

Start playback with the Play

button and activate

All les in the list will be

continuously played in original

order

Start playback with the OK

button and activate

The same le will be played

continuously (repeat)

Start playback with the Play

button and activate

All les in the list will be

played once in random order

Start playback with the Play

button and activate ,

All les in the list will be

continuously played in the

same random order.

CEC and CEC RC Passthrough

This function allows to control the CEC-enabled

devices, that are connected through HDMI ports by

using the remote control of the TV.

The CEC option in the System>Settings>More menu

should be set as Enabled at rst. Press the Source

button and select the HDMI input of the connected

CEC device from the Sources List menu. When

new CEC source device is connected, it will be listed

in source menu with its own name instead of the

connected HDMI ports name(such as DVD Player,

Recorder 1 etc.).

The TV remote is automatically able to perform the

main functions after the connected HDMI source has

been selected.

To terminate this operation and control the TV via

the remote again, press Quick Menu button on the

remote, highlight the CEC RC Passthrough and

set as Off by pressing Left or Right button. This

feature can also be enabled or disabled under the

System>Settings>More menu.

The TV supports also ARC(Audio Return Channel)

feature. This feature is an audio link meant to replace

other cables between the TV and the audio system

(A/V receiver or speaker system).

When ARC is active, TV does not mute its other audio

outputs automatically. So you need to decrease TV

volume to zero manually, if you want to hear audio from

English - 70 -

connected audio device only (same as other optical or

co-axial digital audio outputs). If you want to change

connected device’s volume level, you should select

that device from the source list. In that case volume

control keys are directed to connected audio device.

Note: ARC is supported only via the HDMI1 input.

System Audio Control

Allows an Audio Amplier/Receiver to be used with

the TV. The volume can be controlled using the

remote control of the TV. To activate this feature set

the Speakers option in the System>Settings>More

menu as Amplier. The TV speakers will be muted

and the sound of the watched source will be provided

from the connected sound system.

Note: The audio device should support System Audio Control

feature and CEC option should be set as Enabled.

English - 71 -

TV Menu Contents

System - Picture Menu Contents

Mode

You can change the picture mode to suit your preference or requirements. Picture mode can be

set to one of these options: Cinema, Game(optional), Sports, Dynamic and Natural.

Contrast Adjusts the light and dark values on the screen.

Brightness Adjusts the brightness values on the screen.

Sharpness Sets the sharpness value for the objects displayed on the screen.

Colour Sets the colour value, adjusting the colors.

Energy Saving

For setting the Energy Saving to Custom, Minimum, Medium, Maximum, Auto, Screen

Off or Off.

Note: Available options may differ depending on the selected Mode.

Backlight

This setting controls the backlight level. The backlight function will be inactive if the Energy

Saving is set to an option other then Custom.

Advanced Settings

Dynamic Contrast You can change the dynamic contrast ratio to desired value.

Noise Reduction

If the signal is weak and the picture is noisy, use the Noise Reduction setting to reduce the

amount of noise.

Colour Temp

Sets the desired colour temperature value. Cool, Normal, Warm and Custom options are

available.

White Point

If the Colour Temp option is set as Custom, this setting will be available. Increase the

‘warmth’ or ‘coolness’ of the picture by pressing Left or Right buttons.

Picture Zoom Sets the desired image size format.

Film Mode

Films are recorded at a different number of frames per second to normal television programmes.

Turn this feature on when you are watching lms to see the fast motion scenes clearly.

Skin Tone Skin tone can be changed between -5 and 5.

Colour Shift Adjust the desired colour tone.

HDMI Full Range

While watching from a HDMI source, this feature will be visible. You can use this feature to

enhance blackness in the picture.

PC Position Appears only when the input source is set to VGA/PC.

Autoposition Automatically optimizes the display. Press OK to optimize.

H Position This item shifts the image horizontally to the right hand side or left hand side of the screen.

V Position This item shifts the image vertically towards the top or bottom of the screen.

Dot Clock

Dot Clock adjustments correct the interference that appear as vertical banding in dot

intensive presentations like spreadsheets or paragraphs or text in smaller fonts.

Phase

Depending on the input source(computer etc.) you may see a hazy or noisy picture on the

screen. You can use phase to get a clearer picture by trial and error.

Reset Resets the picture settings to factory default settings (except Game Mode).

While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture Settings

while in PC mode.

English - 72 -

System - Sound Menu Contents

Volume Adjusts the volume level.

Equalizer Selects the equalizer mode. Custom settings can be made only when in User mode.

Balance Adjusts whether the sound comes from the left or right speaker.

Headphone

Sets headphone volume.

Please ensure before using headphones that the headphone volume is set to a low level, to

prevent damage to your hearing.

Sound Mode You can select a sound mode (If the viewed channel supports).

AVL (Automatic Volume

Limiting)

Sets the sound to obtain xed output level between programmes.

Headphone/Lineout

When you connect an external amplier to your TV using the headphone jack, you can

select this option as Lineout. If you have connected headphones to the TV, set this option

as Headphone.

Please ensure before using headphones that this menu item is set to Headphone. If it is

set to Lineout, the output from the headphone socket will be set to maximum which could

damage your hearing.

Dynamic Bass Enables or disables the Dynamic Bass.

Surround sound Surround sound mode can be changed as On or Off.

Digital Out Sets digital out audio type.

English - 73 -

System - Settings Menu Contents

Conditional Access Controls conditional access modules when available.

Language You may set a different language depending on the broadcaster and the country.

Parental

Enter correct password to change parental settings. You can easily adjust Menu Lock, Maturity

Lock, Child Lock or Guidance in this menu. You can also set a new PIN or change the

Default CICAM PIN using the related options.

Note: Some menu options may not be available depending on the country selection in the First Time

Installation. Default PIN can be set to 0000 or 1234. If you have dened the PIN(is requested depending on

the country selection) during the First Time Installation use the PIN that you have dened.

Timers Sets sleep timer to turn off the TV after a certain time. Sets timers for selected programmes.

Date/Time Sets date and time.

Sources Enables or disables selected source options.

Accessibility Displays accessibility options of the TV.

Hard of Hearing Enables any special feature sent from the broadcaster.

Audio Description

A norration track will be played for the blind or visually impaired audience. Press OK to see all

available Audio Description menu options. This feature is available only if the broadcaster

supports it.

Note: Audio description sound feature is not available in recording or time shifting mode.

More Displays other setting options of the TV.

Menu Timeout Changes timeout duration for menu screens.

Software Upgrade Ensures that your TV has the latest rmware. Press OK to see the menu options.

Application Version Displays current software version.

Subtitle Mode

This option is used to select which subtitle mode will be on the screen (DVB subtitle / Teletext

subtitle) if both is available. Default value is DVB subtitle. This feature is available only for the

country option of Norway.

Auto TV OFF Sets the desired time for the TV to automatically go into standby mode when not being operated.

Biss Key

Biss is a satellite signal scrambling system that is used for some broadcasts. If you need to

enter Biss key on a broadcast, you can use this setting. Highlight Biss Key and press OK to

enter keys on the desired broadcast.

Store Mode

Select this mode for store display purposes. Whilst Store Mode is enabled, some items in the

TV menu may not be available.

Power Up Mode

This setting congures the power up mode preference. Last State and Standby options are

available.

CEC

With this setting you can enable and disable CEC functionality completely. Press Left or Right

button to enable or disable the feature.

CEC Auto Power On

This function allows the connected HDMI-CEC compatible device to turn on the TV and switch

to its input source automatically. Press Left or Right button to enable or disable the feature.

Speakers

To hear the TV audio from the connected compatible audio device set as Amplier. You can

use the remote control of the TV to control the volume of the audio device.

OSS Displays Open Source Software license information.

English - 74 -

Installation Menu Contents

Automatic channel

scan (Retune)

Displays automatic tuning options. Digital Aerial: Searches and stores aerial DVB stations. Digital

Cable: Searches and stores cable DVB stations. Analogue: Searches and stores analogue stations.

Satellite: Searches and stores satellite stations.

Manual Channel

Scan

This feature can be used for direct broadcast entry.

Network Channel

Scan

Searches for the linked channels in the broadcast system. Digital Aerial: Searches for aerial network

channels. Digital Cable: Searches for cable network channels.

Analogue Fine

Tune

You can use this setting for ne tuning analogue channels. This feature is not available if no analogue

channels are stored.

Satellite Settings

Displays satellite settings. Satellite list: Displays available satellites. You can Add, Delete satellites or

Edit satellite settings on the list. Antenna installation: You can change satellite anntenna settings and/

or start a satellite scan. SatcoDX: You can upload or download SatcoDX data using the related options.

Installation

Settings (Optional)

Displays installation settings menu. Standby Search(*) : Your TV will search for new or missing

channels while in standby. Any new found broadcasts will be shown. Dynamic Channel Update(*) :

If this option is set as Enabled, the changes on the broadcasts such as frequency, channel name,

subtitle language etc., will be applied automatically while watching.

(*) Availability depends on model.

Setup Home

Transponder

Using this menu, you can edit the main and backup home transponder parameters, including the

Pid of the related M7 operator, which are used to download the channel list. Set your preferences

and press the Green button to save the settings. Then start an M7 operator installation using the

Automatic channel scan>Satellite menu.

Clear Service List

Use this setting to clear channels stored. This setting is visible only when the Country option is set

to Denmark, Sweden, Norway or Finland.

Select Active

Network

This setting allows you to select only the broadcasts within the selected network to be listed in the

channel list. This feature is available only for the country option of Norway.

Signal Information

You can use this menu item to monitor signal related informations such as signal level/quality, network

name etc for available frequencies.

First Time

Installation

Deletes all stored channels and settings, resets TV to factory settings.

English - 75 -

General TV Operation

Using the Channel List

The TV sorts all stored stations in the Channel List.

You can edit this channel list, set favourites or set

active stations to be listed by using the Channel List

options. Press the OK/TV button to open the Channel

List. You can lter the listed channels by pressing the

Blue button or open the Edit Channel List menu by

pressing the Green button in order to make advanced

changes in the current list.

Note: The commands Move, Delete and Edit name in the

Edit Channel List menu are not available for channels that

are being broadcasted from an M7 operator.

Managing the Favourite Lists

You can create four different lists of your favourite

channels. Enter the Channel List in the main menu

or press the Green button while the Channel List

is displayed on the screen in order to open the Edit

Channel List menu. Select the desired channel on the

list. You can make multiple choices by pressing the

Yellow button. Then press the OK button to open the

Channel Edit Options menu and select Add/Remove

Favourites option. Press the OK button again. Set the

desired list option to On. The selected channel/s will

be added to the list. In order to remove a channel or

channels from a favourite list follow the same steps

and set the desired list option to Off.

You can use the Filter function in the Edit Channel

List menu to lter the channels in the Channel list

permanently according to your preferences. Using this

Filter option, you can set one of your four favourite lists

to be displayed everytime the Channel list is opened.

The ltering function in the Channel list menu will only

lter the currently displayed Channel list in order to

nd a channel and tune in to it. These changes will

not remain the next time the Channel list is opened if

you don’t save them. To save the changes on the list

press the Red button after ltering while the Channel

list is displayed on the screen.

Conguring Parental Settings

The Parental Settings menu options can be used to

prohibit users from viewing of certain programmes,

channels and using of menus. These settings are

located in the System>Settings>Parental menu.

To display parental lock menu options, a PIN number

should be entered. After coding the correct PIN

number, Parental Settings menu will be displayed.

Menu Lock: This setting enables or disables access

to all menus or installation menus of the TV.

Maturity Lock: If this option is set, TV gets the maturity

information from the broadcast and if this maturity level

is disabled, disables access to the broadcast.

Note: If the country option in the First Time Installation is

set as France, Italy or Austria, Maturity Lock’s value will be

set to 18 as default.

Child Lock: If this option is set to ON, the TV can only

be controlled by the remote control. In this case the

control buttons on the TV will not work.

Set PIN: Denes a new PIN number.

Default CICAM PIN: This option will appear as greyed

out if no CI module is inserted into the CI slot of the

TV. You can change the default PIN of the CI CAM

using this option.

TV PIN(*): By enabling or disabling this option you can

allow or restrict some M7 operator channels to send

PIN queries. These PIN queries provide an access

control mechanism for related channels. If this option

is set as On, the channels which send PIN queries can

not be accessed without entering the right PIN rst.

(*) This menu option will only be available if an M7 operator

installation is performed.

Note: Default PIN can be set to 0000 or 1234. If you have

defined the PIN(is requested depending on the country

selection) during the First Time Installation use the PIN that

you have dened.

Some options may not be available depending on the country

selection in the First Time Installation.

Electronic Programme Guide (EPG)

Some channels send information about their broadcast

schedules. Press the Epg button to view the

Programme Guide menu.

There are 3 different types of schedule layouts

available, Timeline Schedule, List Schedule and

Now/Next Schedule. To switch between them follow

the instructions on the bottom of the screen.

Timeline Schedule

Zoom (Yellow button): Press the Yellow button to

see events in a wider time interval.

Filter (Blue button): Views ltering options.

Highlight Genre (Subtitles button): Displays

Highlight Genre menu. Using this feature, you can

search the programme guide database in accordance

with the genre. Info available in the programme guide

will be searched and results matching your criteria

will be highlighted.

Options (OK button): Displays event options.

Event Details (Info button): Displays detailed

information about selected events.

Next/Prev Day (Programme +/- buttons): Displays

the events of previous or next day.

Search (Text button): Displays Guide Search menu.

Now (Source button): Displays current event of the

highlighted channel.

Rec./Stop (Record button): The TV will start to record

the selected event. You can press again to stop the

recording.

English - 76 -

IMPORTANT: Connect a USB disk to your TV while the TV

is switched off. You should then switch on the TV to enable

the recording feature.

Note: Switching to a different broadcast or source is not

available during a recording.

List Schedule(*)

(*) In this layout option, only the events of the highlighted

channel will be listed.

Prev. Time Slice (Red button): Displays the events

of previous time slice.

Next/Prev Day (Programme +/- buttons): Displays

the events of previous or next day.

Event Details (Info button): Displays detailed

information about selected events.

Filter (Text button): Views ltering options.

Next Time Slice (Green button): Displays the events

of next time slice.

Options (OK button): Displays event options.

Rec./Stop (Record button): The TV will start to record

the selected event. You can press again to stop the

recording.

IMPORTANT: Connect a USB disk to your TV while the TV

is switched off. You should then switch on the TV to enable

the recording feature.

Note: Switching to a different broadcast or source is not

available during a recording.

Now/Next Schedule

Options (OK button): Displays event options.

Event Details (Info button): Displays detailed

information about selected events.

Filter (Blue button): Views ltering options.

Rec./Stop (Record button): The TV will start to

record the selected events. You can press again to

stop the recording.

IMPORTANT: Connect a USB disk to your TV while the TV

is switched off. You should then switch on the TV to enable

the recording feature.

Note: Switching to a different broadcast or source is not

available during a recording.

Event Options

Use the directional buttons to highlight an event and

press OK button to display Event Options menu. The

following options are available.

Select Channel: Using this option, you can switch to

the selected channel.

Record / Delete Rec. Timer: Select the Record

option and press the OK button. If the event is going

to be broadcasted at a future time, it will be added

to Timers list to be recorded. If the selected event is

being broadcasted at the moment, recording will start

immediately.

To cancel an already set recording, highlight that event

and press the OK button and select the option Delete

Rec. Timer. The recording will be cancelled.

Set Timer on Event / Delete Timer on Event: After

you have selected an event in the EPG menu, press the

OK button. Select Set Timer on Event option and press

the OK button. You can set a timer for future events.

To cancel an already set timer, highlight that event and

press the OK button. Then select Delete Timer on Event

option. The timer will be cancelled.

Notes: You cannot switch to any other channel or source while

there is an active recording or timer on the current channel.

It is not possible to set timer or record timer for two or more

individual events at the same time interval.

Teletext Services

Press the Text button to enter. Press again to activate

mix mode, which allows you to see the teletext page

and the TV broadcast at the same time. Press once

more to exit. If available, sections in the teletext pages

will become colour-coded and can be selected by

pressing the coloured buttons. Follow the instructions

displayed on the screen.

Software Upgrade

Your TV is capable of nding and updating the rmware

automatically via the broadcast signal.

Software upgrade search via user interface

On the main menu select System>Settings and then

More. Navigate to Software upgrade and press the

OK button. In Upgrade options menu select Scan

for upgrade and press OK button to check for a new

software upgrade.

If a new upgrade is found, it starts to download

the upgrade. After the download is completed

confirm the question asking about rebooting the

TV by pressing the OK to continue with the reboot

operation.

3 AM search and upgrade mode

Your TV will search for new upgrades at 3:00 o’clock if

Automatic scanning option in the Upgrade options

menu is set to Enabled and if the TV is connected

to an aerial signal. If a new software is found and

downloaded successfully, it will be installed at the

next power on.

Note: Do not unplug the power cord while led is blinking during

the reboot process. If the TV fails to come on after the upgrade,

unplug, wait for two minutes then plug it back in.

Troubleshooting & Tips

Tv will not turn on

Make sure the power cord is plugged in securely to

wall outlet. Check if batteries are exhausted. Press the

Power button on the TV.

Poor picture

• Check if you have selected the correct TV system.

• Low signal level can cause picture distortion. Please

check antenna access.

• Check if you have entered the correct channel

frequency if you have done manual tuning.

La pagina sta caricando ...

Salora 22LED9109CTS2DVD Operating Instructions Manual

Marca: Salora

Modello: 22LED9109CTS2DVD

Categoria: TV LCD

Tipo: Operating Instructions Manual

Scarica il pdf

rapporto

in altre lingue

English: Salora 22LED9109CTS2DVD

Salora 22LED9109CTS2DVD Operating Instructions Manual

Salora 22LED9109CTS2DVD Operating Instructions Manual

in altre lingue

Altri documenti