Nordmende NMF43DLEDFSMA Manuale utente

Marca: Nordmende

Modello: NMF43DLEDFSMA

Categoria: TV LCD

Tipo: Manuale utente

English - 1 -

Contents

Safety Information ................................................... 1

Markings on the Product.......................................... 2

Environmental Information.......................................3

Features .................................................................. 3

Accessories Included............................................... 3

Standby Notifications ............................................... 3

TV Control Switch & Operation................................ 4

Using Main TV Menu ............................................... 4

Inserting the Batteries into the Remote ................... 5

Power Connection ................................................... 5

Antenna Connection ................................................ 5

License Notification ................................................. 6

Disposal Information ................................................ 6

Remote Control ....................................................... 7

Connections............................................................. 8

Switching On/Off ...................................................... 9

First Time Installation............................................... 9

Media Playback via USB Input .............................. 10

USB Recording ...................................................... 10

Media Browser....................................................... 11

FollowMe TV .......................................................... 12

CEC ....................................................................... 12

E-Manual ............................................................... 12

Settings Menu Contents ........................................ 13

General TV Operation ...........................................17

Using the Channel List .......................................... 17

Configuring Parental Settings ................................ 17

Electronic Programme Guide ................................ 17

Teletext Services ................................................... 18

Software Upgrade.................................................. 18

Troubleshooting & Tips .......................................... 18

PC Input Typical Display Modes ............................ 19

AV and HDMI Signal Compatibility ........................ 19

Supported File Formats for USB Mode ................. 20

Video File Formats ................................................ 20

Picture File Formats .............................................. 20

Audio File Formats ................................................ 20

Subtitle File Formats.............................................. 21

Supported DVI Resolutions ................................... 21

Connectivity ........................................................... 22

Wired Connectivity................................................. 22

Wireless Connectivity ............................................ 22

Wake ON ............................................................... 23

Wireless Display .................................................... 23

Connectivity Troubleshooting ................................ 24

Using Audio Video Sharing Network Service ......... 24

Apps ...................................................................... 25

Freeview Play Platform..........................................25

Internet Browser .................................................... 25

HBBTV System...................................................... 26

Smart Center ......................................................... 26

DVB functionality information ................................ 28

Important Instructions ............................................ 29

Safety Information

IMPORTANT - Please read these instructions

fully before installing or operating

WARNING: This device is intended to be used

by persons (including children) who are capable

/ experienced of operating such a device

unsupervised, unless they have been given

supervision or instruction concerning the use of the

device by a person responsible for their safety.

• Use this TV set at an altitude of less than 2000 meters

above the sea level, in dry locations and in regions with

moderate or tropical climates.

• The TV set is intended for household and similar

general use but may also be used in public places.

• For ventilation purposes, leave at least 5cm of free

space around the TV.

• The ventilation should not be impeded by covering or

blocking the ventilation openings with items, such as

newspapers, table-cloths, curtains, etc.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO

NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

Note: Follow the on screen instructions for operating the related

features.

In extreme weather (storms, lightning) and long inactivity

periods (going on holiday) disconnect the TV set from the

mains.

The mains plug is used to disconnect TV set from the mains

and therefore it must remain readily operable. If the TV set is

not disconnected electrically from the mains, the device will

still draw power for all situations even if the TV is in standby

mode or switched off.

English - 2 -

• The power cord plug should be easily accessible. Do

not place the TV, furniture, etc. on the power cord. A

damaged power cord/plug can cause fire or give you

an electric shock. Handle the power cord by the plug,

do not unplug the TV by pulling the power cord. Never

touch the power cord/plug with wet hands as this could

cause a short circuit or electric shock. Never make a

knot in the power cord or tie it with other cords. When

damaged it must be replaced, this should only be done

by qualified personnel.

• Do not expose the TV to dripping or splashing of liquids

and do not place objects filled with liquids, such as

vases, cups, etc. on or over the TV (e.g., on shelves

above the unit).

• Do not expose the TV to direct sunlight or do not

place open flames such as lit candles on the top of

or near the TV.

• Do not place any heat sources such as electric heaters,

radiators, etc. near the TV set.

• Do not place the TV on the floor and inclined surfaces.

• To avoid danger of suffocation, keep plastic bags out of

the reach of the babies, children and domestic animals.

• Carefully attach the stand to the TV. If the stand is

provided with screws, tighten the screws firmly to

prevent the TV from tilting. Do not over-tighten the

screws and mount the stand rubbers properly.

• Do not dispose of the batteries in fire or with hazardous

or flammable materials.

WARNING - Batteries must not be exposed to excessive

heat such as sunshine, fire or the like.

WARNING - Excessive sound pressure from earphones

or headphones can cause hearing loss.

ABOVE ALL - NEVER let anyone, especially children,

push or hit the screen, push anything into holes, slots

or any other openings in the case.

Caution

Serious injury or death risk

Risk of electric shock

Dangerous voltage risk

Maintenance

Important maintenance

component

Markings on the Product

The following symbols are used on the product as

a marker for restrictions and precautions and safety

instructions. Each explanation shall be considered

where the product bears related marking only. Note such

information for security reasons.

Class II Equipment: This appliance is designed

in such a way that it does not require a safety

connection to electrical earth.

Hazardous Live Terminal: The marked

terminal(s) is/are hazardous live under normal

operating conditions.



Caution, See Operating Instructions: The

marked area(s) contain(s) user replaceable coin

or button cell batteries.





Class 1 Laser Product: This

product contains Class 1

laser source that is safe under

reasonably foreseeable

conditions of operation.

WARNING

Do not ingest the battery, Chemical Burn Hazard

This product or the accessories supplied with the

product may contain a coin/button cell battery. If the

coin/button cell battery is swallowed, it can cause

severe internal burns in just 2 hours and can lead

to death.

Keep new and used batteries away from children.

If the battery compartment does not close securely,

stop using the product and keep it away from children.

If you think batteries might have been swallowed or

placed inside any part of the body, seek immediate

medical attention.

– – – – – – – – – – – –

Never place a television set in unstable or inclined

locations. A television set may fall, causing serious

personal injury or death. Many injuries, particularly to

children, can be avoided by taking simple precautions

such as;

• Using cabinets or stands recommended by the

manufacturer of the television set.

• Only using furniture that can safely support the

television set.

• Ensuring the television set is not overhanging the

edge of the supporting furniture.

• Not placing the television set on tall furniture

(for example, cupboards or bookcases) without

anchoring both the furniture and the television set

to a suitable support.

• Not standing the television set on cloth or other

materials placed between the television and

supporting furniture.

• Educating children about the dangers of climbing on

furniture to reach the television set or its controls.

If your existing television set is being retained and

relocated, the same considerations as above should

be applied.

– – – – – – – – – – – –

Apparatus connected to the protective earthing

of the building installation through the MAINS

connection or through other apparatus with a

connection to protective earthing – and to a television

distribution system using coaxial cable, may in some

circumstances create a fire hazard. Connection to

a television distribution system has therefore to be

provided through a device providing electrical isolation

below a certain frequency range (galvanic isolator)

English - 3 -

WALL MOUNTING WARNINGS

• Read the instructions before mounting your TV on

the wall.

• The wall mount kit is optional. You can obtain from your

local dealer, if not supplied with your TV.

• Do not install the TV on a ceiling or on an inclined wall.

• Use the specified wall mounting screws and other

accessories.

• Tighten the wall mounting screws firmly to prevent the

TV from fall. Do not over-tighten the screws.

Environmental Information

This television is designed to be environment friendly. To

reduce energy consumption, you can follow these steps:

If you set the Energy Saving to Minimum, Medium,

Maximum or Auto the TV will reduce the energy

consumption accordingly. If you like to set the Backlight

to a fixed value set as Custom and adjust the Backlight

(located under the Energy Saving setting) manually

using Left or Right buttons on the remote. Set as Off to

turn this setting off.

Note: Available Energy Saving options may differ depending on

the selected Mode in the Settings>Picture menu.

The Energy Saving settings can be found in the Set-

tings>Picture menu. Note that some picture settings will

be unavailable to be changed.

If pressed Right button or Left button consecutively, “Screen

ZඈOOEHRIIඈQVHFRQGV´PHVVDJHZඈOOEHGඈVSOD\HGRQ

the screen. Select Proceed and press OK to turn the screen

off immediately. If you don’t press any button, the screen

will be off in 15 seconds. Press any button on the remote

or on the TV to turn the screen on again.

Note: Screen Off option is not available if the Mode is set to

Game.

When the TV is not in use, please switch off or disconnect

the TV from the mains plug. This will also reduce energy

consumption.

Features

• Remote controlled colour TV

• Fully integrated digital terrestrial/cable/satellite TV

(DVB-T-T2/C/S-S2)

• HDMI inputs to connect other devices with HDMI

sockets

• USB input

• OSD menu system

• Stereo sound system

• Teletext

• Headphone connection

• Automatic programming system

• Manual tuning

• Automatic power down after up to eight hours

• Sleep timer

• Child lock

• Automatic sound mute when no transmission

• NTSC playback

• AVL (Automatic Volume Limiting)

• PLL (Frequency Search)

• PC input

• Game Mode (Optional)

• Picture off function

• Programme recording

• Programme timeshifting

• Ethernet (LAN) for Internet connectivity and service

• 802.11 a/b/g/n built in WLAN Support

• Audio Video Sharing

• HbbTV

Accessories Included

• Remote Control

• Batteries: 2 x AAA

• Instruction Book

• Quick Start Guide

Standby Notifications

If the TV does not receive any input signal (e.g. from

aerial or HDMI source) for 3 minutes, it will go

into standby. When you next switch-on, the following

message will be displayed: “

TV switched to stand-by

mode automatically because there was no signal

for a long time.”

The Auto TV OFF option(in the Settings>System >More

menu) could have been set to a value between 1 and 8

hours by default. If this setting is not set as Off and the

TV has been left on and not been operated during the

set time, it will switch into standby mode after the set

time has expired. Wh

en you next switch-on the TV, the

following message will be displayed. “

TV switched to

stand-by mode automatically because no operation

was made for a long time.” Before the TV switches

into standby mode a dialogue window will be displayed.

If you do not press any button the TV will switch into the

standby mode after a waiting period of about 5 minutes.

You can highlight Yes and press OK to switch the TV

into standby mode immediately. If you highlight No and

press OK, the TV will remain on. You can also choose

to cancel the Auto TV OFF function from this dialogue.

Highlight Disable and press OK, the TV will remain on

and the function will be cancelled. You can enable this

function again by changing the setting of the Auto TV

OFF option from the Settings>System>More menu.

English - 4 -

TV Control Switch & Operation

1. Up direction

2. Down direction

3. Volume / Info /

6RXUFHV/ඈVWVHOHFWඈRQDQG

6WDQGE\2QVZඈWFK

The Control button allows

you to control the Volume

/ Programme / Source

and Standby-On functions

of the TV.

To change volume: Increase the volume by pushing

the button up. Decrease the volume by pushing the

button down.

To change channel: Press the middle of the button in,

the information banner will appear on the screen. Scroll

through the stored channels by pushing the button up

or down.

To change source: Press the middle of the button in

twice(for the second time in total), the source list will

appear on the screen. Scroll through the available

sources by pushing the button up or down.

To turn the TV off: Press the middle of the button in

and hold it down for a few seconds, the TV will turn into

standby mode.

To turn on the TV: Press the middle of the button in,

the TV will turn on.

Notes:

If you turn the TV off, this cycle starts again beginning with the

volume setting.

Main menu OSD cannot be displayed via control button.

Operation with the Remote Control

Press the Menu button on your remote control to display

main menu. Use the directional buttons and OK button

to navigate and set. Press Return/Back or Menu button

to quit a menu screen.

Input Selection

Once you have connected external systems to your

TV, you can switch to different input sources. Press the

Source button on your remote control consecutively to

select the different sources.

Changing Channels and Volume

You can change the channel and adjust the volume by

using the Programme +/- and Volume +/- buttons on

the remote.

Using Main TV Menu

When the Menu button is pressed, the main TV menu

will appear at the bottom of the screen. You can navigate

through the menu items using the directional buttons

on the remote. To select an item or see the sub-menu

options of the highlighted menu press OK button. When

you highlight a menu option some of the sub-menu

items of this menu may appear on the upper side of the

menu bar for quick access. To use a quick access item

highlight it, press OK and set as desired using the Left/

Right directional buttons. When finished press OK or

Back/Return button to exit.

Press Exit button to close the main menu.

1. Home

When main menu is opened Home menu bar will be

highlighted. The content of the Home menu can be

customised by adding options from other menus. Just

highlight an option and press the Down direction button

on the remote. If you see Add to Home option you can

add it to the Home menu. Same way you can delete or

change the position of any item in the Home menu. Press

the Down direction button and select Delete or Move

option and press OK. In order to move a menu item use

the Right and Left direction buttons to select the position

that you want the item to move to and press OK.

2. TV

2.1. Guide

You can access the electronic programme guide menu

using this option. Refer to Electronic Programme Guide

section for more information.

2.2. Channels

You can access the Channels menu using this option.

Refer to Using the Channel List section for more

information.

2.3. Timers

You can set timers for future events using the options of

this menu. You can also review the previously created

timers under this menu.

To add a new timer select the Add Timer tab using the

Left/Right buttons and press OK. Set the sub-menu

options as desired and when finished press OK. A new

timer will be created.

To edit a previously created timer, highlight that timer,

select the Edit Selected Timer tab and press OK.

Change the sub-menu options as desired and press OK

to save your settings.

To cancel an already set timer, highlight that timer, select

Delete Selected Timer tab and press OK. A confirmation

message will be displayed. Highlight Yes and press OK

to proceed. The timer will be cancelled.

It is not possible to set timers for two or more events that

will broadcasted in different channels at the same time

interval. In this case you will be asked to choose one of

these timers and cancel others. Highlight the timer you

want to cancel and press OK, Options menu will be

displayed. Then highlight Set/Cancel

and press OK to

cancel that timer. You will have to save changes after that.

In order to do that press OK, highlight Save Changes

and press OK again.

English - 5 -

2.4. Recordings

You can manage your recordings using the options of this

menu. You can playback, edit, delete or sort previously

recorded events. Highlight a tab by using the Left or Right

direction button and press OK to see available options.

Recording Settings

You can also configure your recording preferences

using the Settings tab in the Recordings menu.

Highlight Settings tab by using Left or Right button

and press OK. Then select the desired item in the sub-

menu and set by using Left or Right button.

Start early: You can set recording timer’s starting time

to start earlier by using this setting.

End late: You can set recording timer’s end time to end

later by using this setting.

Max Timeshift: This setting allows you to set the

maximum duration for the timeshift recording. Available

options are approximate and the actual recording time

may change in practice depending on the broadcast.

The reserved and free storage space values will

change according to this setting. Make sure that you

have enough free space otherwise instant recording

may not be possible.

Auto discard: You can set the Discard type as None,

Oldest, Longest or Shortest. If it is not set to None,

you can set the Unplayed option as Included or

Excluded. These options determine the preferences for

deleting the recordings in order to obtain more storage

space for ongoing records.

Hard disk information: You can view detailed

information about the USB storage device connected

to your TV. Highlight and press OK to see and press

Back/Return to close.

Format Disk: If you want to delete all files on the

connected USB storage device and convert the disk

format to FAT32, you can use this option. Press OK

button while the Format Disk option is highlighted. A

menu will appear on the screen, requiring you to enter

the PIN(*). After you enter the PIN, a confirmation

message will be displayed. Select Yes and press OK

to start formatting the USB storage device. Select No

and press OK to cancel.

(*) Default PIN could have been set to 0000 or 1234. If you

have defined the PIN(is requested depending on the country

selection) during the First Time Installation use the PIN that

you have defined.

3. Settings

You can manage the settings of your TV using the options

of this menu. Refer to Settings Menu Contents section

for more information.

4. Apps

When your TV is connected to the Internet related

contents will also be available, including Apps related

contents. Using the Apps menu you can access and

manage your applications. You can add new apps from

the market or delete the existing ones. Refer to Apps

section for more information.

Sources

You can manage your input source references using

the options of this menu. To change the current source

highlight one of the options and press OK.

Source Settings

(GඈW WKHQDPHV HQDEOH RU GඈVDEOH VHOHFWHG VRXUFH

RSWඈRQV

Inserting the Batteries into the Remote

Remove the screw that secure the battery compart-

ment cover on the back side of the remote control

first. Insert two size AAA batteries. Make sure the (+)

and (-) signs match (observe correct polarity). Do not

mix old and new batteries. Replace only with same or

equivalent type. Place the cover back on. Then screw

the cover back on again.

A message will be displayed on the screen when the

batteries are low and must be replaced. Note that when

the batteries are low, the performance of the remote

control may be impaired.

Batteries should not be exposed to excessive heat

such as sunshine, fire or the like.

Power Connection

IMPORTANT: The TV set is designed to operate on a

9$&+] supply. After unpacking, allow the

TV set to reach the ambient room temperature before

you connect the set to the mains. Plug the power cable

to the mains socket outlet.

Antenna Connection





$176$7

$1779

Connect the aerial or

cable TV plug to the

AERIAL INPUT

(ANT-TV) socket or

satellite plug to the

SATELLITE INPUT

(ANT SAT) socket

located on the rear

side of the TV.

Rear side of the TV

1. Satellite

2. Aerial or cable

If you want to connect a device to the TV, make

sure that both the TV and the device are turned off

before making any connection. After the connection

is done, you can turn on the units and use them.

English - 6 -

License Notification

The terms HDMI and HDMI High-

Definition Multimedia Interface,

and the HDMI Logo are trademarks

or registered trademarks of HDMI Licensing Administrator,

Inc. in the United States and other countries.

Manufactured under license from Dolby Laboratories.

Dolby, Dolby Audio and the double-D symbol are

trademarks of Dolby Laboratories.

YouTube and the YouTube logo are trademarks of

Google Inc.

This product contains technology subject to certain

intellectual property rights of Microsoft. Use or distribution

of this technology outside of this product is prohibited

without the appropriate license(s) from Microsoft.

Content owners use Microsoft PlayReady™ content

access technology to protect their intellectual property,

including copyrighted content. This device uses

PlayReady technology to access PlayReady-protected

content and/or WMDRM-protected content. If the device

fails to properly enforce restrictions on content usage,

content owners may require Microsoft to revoke the

device’s ability to consume PlayReady-protected content.

Revocation should not affect unprotected content or

content protected by other content access technologies.

Content owners may require you to upgrade PlayReady

to access their content. If you decline an upgrade, you will

not be able to access content that requires the upgrade.

The “CI Plus” Logo is a trademark of CI Plus LLP.

This product is protected by certain intellectual property

rights of Microsoft Corporation. Use or distribution of such

technology outside of this product is prohibited without

a license from Microsoft or an authorized Microsoft

subsidiary.

Disposal Information

[European Union]

These symbols indicate that the electrical and electronic

equipment and the battery with this symbol should not

be disposed of as general household waste at its end-of-

life. Instead, the products should be handed over to the

applicable collection points for the recycling of electrical

and electronic equipment as well as batteries for proper

treatment, recovery and recycling in accordance with

your national legislation and the Directive 2012/19/EU

and 2013/56/EU.

By disposing of these products correctly, you will help

to conserve natural resources and will help to prevent

potential negative effects on the environment and human

health which could otherwise be caused by inappropriate

waste handling of these products.

For more information about collection points and recycling

of these products, please contact your local municipal

office, your household waste disposal service or the shop

where you purchased the product.

Penalties may be applicable for incorrect disposal of this

waste, in accordance with national legislation.

[Business users]

If you wish to dispose of this product, please contact

your supplier and check the terms and conditions of the

purchase contract.

[Other Countries outside the European Union]

These symbols are only valid in the European Union.

Contact your local authority to learn about disposal and

recycling.

The product and packaging should be taken to your local

collection point for recycling.

Some collection points accept products free of charge.

Note: The sign Pb below the symbol for batteries indicates that

this battery contains lead.

 

1. Products

2. Battery

Wireless LAN Transmitter Specifications

Frequency Ranges Max Output Power

2400 - 2483,5 MHz (CH1-CH13) < 100 mW

5150 - 5250 MHz (CH36 - CH48) < 200 mW

5250 - 5350 MHz (CH52 - CH64) < 200 mW

5470 - 5725 MHz (CH100 - CH140) < 200 mW

Country Restrictions

This device is intended for home and office use in all

EU countries (and other countries following the rele-

vant EU directive) without any limitation except for the

countries mentioned below.

Country Restriction

Bulgaria

General authorization required for outdoor

use and public service

France In-door use only for 2454-2483.5 MHz

Italy

If used outside of own premises, general

authorization is required

Greece In-door use only for 5470 MHz to 5725 MHz band

Luxembourg

General authorization required for network

and service supply(not for spectrum)

Norway

Radio transmission is prohibited for the

geographical area within a radius of 20 km

from the centre of Ny-Ålesund

Russian Fed-

eration

In-door use only

The requirements for any country may change at any

time. It’s recommended that user checks with local

authorities for the current status of their national reg-

ulations for both 2.4 GHz and 5 GHz wireless LAN’s.

English - 7 -

Remote Control

1. Standby: Switches On / Off the TV

2. Numeric buttons: Switches the channel, enters

a number or a letter in the text box on the screen.

3. Language: Switches among sound modes (an-

alogue TV), displays and changes audio/subtitle

language and turns subtitles on or off (digital TV,

where available)

4. Mute: Completely turns off the volume of the TV

 Volume +/-

6. Netflix: Launches the Netflix application

7. Guide: Displays the electronic programme guide

8. Directional buttons: Helps navigate menus,

content etc. and displays the subpages in TXT

mode when pressed Right or Left

9. OK: Confirms user selections, holds the page (in

TXT mode), views Channels menu (DTV mode)

10. Back/Return: Returns to previous screen, previous

menu, opens index page (in TXT mode). Quickly

cycles between previous and current channels or

sources

11. Freeview Play: Connects to the Freeview Play

platform where you can access available catch-up

TV services

12. Coloured Buttons: Follow the on-screen instruc-

tions for coloured button functions

13. Rewind: Moves frames backwards in media such

as movies

14. Record: Records programmes

 Play: Starts to play selected media

16. Pause: Pauses the media being played, starts

timeshift recording

17. Stop: Stops the media being played

18. Fast Forward: Moves frames forward in media

such as movies

19. Prime Video: Launches the Amazon Prime Video

application

20. Exit: Closes and exits from displayed menus or

returns to previous screen

21. Info: Displays information about on-screen content,

shows hidden information (reveal - in TXT mode)

22. YouTube: Launches the YouTube application

23. Menu: Displays TV menu

24. Programme +/-

 Text: Displays teletext (where available), press

again to superimpose the teletext over a normal

broadcast picture (mix)

26. Source: Shows available broadcast and content

sources

English - 8 -

Connections

Connector Type Cables Device

VGA

Connection

(back)

AUDIO IN

PC/YPbPr

Audio

Connection

(back)

YPbPr/PC Audio Cable

HDMI

Connection

(side&back)

SPDIF

(Optical Out)

Connection

(back)

BACK AV

Back AV

(Audio/Video)

Connection

(back)

Audio Video Cable

HEADPHONE

Headphone

Connection

(side)

YPBPR

YPbPr Video

Connection

(back)

PC to YPbPr Connection Cable

USB

Connection

(side)

Connection

(side)

CAM

module

LAN

Ethernet

Connection

(back)

LAN / Ethernet Cable

See the illustrations on the left

side. You can use YPbPr to VGA

cable to enable YPbPr signal via

VGA input. You cannot use VGA

and YPbPr at the same time. To

enable PC/YPbPr audio, you will

need to use the back audio inputs

with a YPbPr/PC audio cable for

audio connection. When using

the wall mounting kit (available

from a third party in the market,

if not supplied), we recommend

that you plug all your cables into

the back of the TV before mounting

on the wall. Insert or remove the

CI module only when the TV is

SWITCHED OFF. You should refer

to the module instruction manual

for details of the settings. The/

Each USB input of your TV supports

devices up to 500mA. Connecting

devices that have current value

above 500mA may damage your TV.

When connecting equipment using a

HDMI cable to your TV, to guarantee

sufficient immunity against parasitic

frequency radiation, you have to use

a high speed shielded (high grade)

HDMI cable with ferrites.

If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making

any connection. After the connection is done, you can turn on the units and use them.

English - 9 -

Switching On/Off

To Switch the TV On

Connect the power cord to a power source such as a

wall socket (220-240V AC, 50 Hz).

To switch on the TV from standby mode either:

• Press the Standby button, Programme +/- or a

numeric button on the remote control.

• Press the middle of the side function switch on the

TV in.

To Switch the TV Off

Press the Standby button on the remote control or

press the middle of the side function switch on the

TV in and hold it down for a few seconds, the TV will

switch into standby mode.

To power down the TV completely, unplug the

power cord from the mains socket.

Note: When the TV is switched into standby mode, the standby

LED can blink to indicate that features such as Standby

Search, Over Air Download or Timer is active. The LED can

also blink when you switch on the TV from standby mode.

First Time Installation

When turned on for the first time, the language

selection screen is displayed. Select the desired

language and press OK. In the following steps of

the installation guide, set your preferences using the

directional buttons and OK button.

On the second screen set your country preference.

Depending on the Country selection you may be asked

to set and confirm a PIN at this point. The selected PIN

cannot be 0000. You have to enter it if you are asked

to enter a PIN for any menu operation later.

You can activate Store Mode option in the next step.

This option will configure your TV’s settings for store

environment and depending on the TV model being

used, the supported features of it may be displayed on

the side of the screen as an info banner. This option

is intended only for store use. It is recommended to

select Home Mode for home use. This option will be

available in Settings>System>More menu and can

be turned off/on later. Make your selection and press

OK to continue.

Depending on the model of your TV and the country

selection Privacy Settings menu may appear at

this point. Using this menu you can set your privacy

privileges. Highlight a feature and use Left and

Right directional buttons to enable or disable. Read

the related explanations displayed on the screen

for each highlighted feature before making any

changes. You can use Programme +/- buttons to

scroll up and down to read the entire text. You will

be able to change your preferences at any time

later from the Settings>System>Privacy Settings

menu. If the Internet Connection option is disabled

Network/Internet Settings screen will be skipped

and not displayed. If you have any questions,

complaints or comments regarding this privacy

policy or its enforcement, please contact by email at

[email protected].

+ඈJKOඈJKWNext and press OK button on the remote

control to continue and the Network/Internet Settings

menu will be displayed. Please refer to &RQQHFWඈYඈW\

VHFWඈRQWRFRQIඈJXUHDZඈUHGRUDZඈUHOHVVFRQQHFWඈRQ

,I\RXZDQW\RXU79WRFRQVXPHOHVVSRZHUඈQVWDQGE\

PRGH\RXFDQGඈVDEOHWKHWake OnRSWඈRQE\VHWWඈQJඈW

as Off$IWHUWKHVHWWඈQJVDUHFRPSOHWHGKඈJKOඈJKWNext

and press OKEXWWRQWRFRQWඈQXH.

On the next screen you need to agree to the terms

and conditions of Freeview Play to make use of the

related services. Scroll the page to read the entire text

using the up/down directional buttons or Programme

+/- buttons. Highlight Yes and press OK on the remote

to confirm and proceed. Highlight No and press OK to

proceed without confirmation. For further requirements

for Freeview Play services refer to the Freeview Play

Platform section.

On next screen you can set broadcast types to be

searched, set your encrypted channel searching

and time zone (depending on the country selection)

preferences. Additionally you can set a broadcast

type as your favourite one. Priority will be given to the

selected broadcast type during the search process

and the channels of it will be listed on the top of the

channel list. When finished, highlight Next and press

OK to continue.

About Selecting Broadcast Type

To turn a search option for a broadcast type highlight

it and press OK. The checkbox next to the selected

option will be checked. To turn the search option off

clear the checkbox by pressing OK after moving the

focus on the desired broadcast type option.

Digital Aerial: If D. Aerial broadcast search option

is turned on, the TV will search for digital terrestrial

broadcasts after other initial settings are completed.

Digital Cable: If D. Cable broadcast search option

is turned on, the TV will search for digital cable

broadcasts after other initial settings are completed.

A message will be displayed before starting to search

asking if you want to perform cable network search. If

you select Yes and press OK you can select Network

or set values such as Frequency, Network ID and

Search Step on the next screen. If you select No

and press OK you can set Start Frequency, Stop

Frequency and Search Step on the next screen.

When finished, highlight Next and press OK button

to continue.

Note: Searching duration will change depending on the

selected Search Step.

Satellite: If Satellite broadcast search option is turned

on, the TV will search for digital satellite broadcasts

after other initial settings are completed. Before

English - 10 -

satellite search is performed some settings should be

made. Antenna Type menu will be displayed first. You

can select Antenna Type as Direct, Single Satellite

Cable or DiSEqC switch by using Left or Right

buttons. After selecting your antenna type press OK to

see the options to proceed. Continue, Transponder

list and Configure LNB options will be available. You

can change the transponder and LNB settings using

the related menu options.

• Direct: If you have a single receiver and a direct

satellite dish, select this antenna type. Press OK to

FRQWඈQXH Select an available satellite on the next

screen and press OK to scan for services.

• Single Satellite Cable: If you have multiple

receivers and a single satellite cable system, select

this antenna type. Press OK to continue. Configure

settings by following instructions on the next screen.

Press OK to scan for services.

• DiSEqC switch: If you have multiple satellite dishes

and a DiSEqC switch, select this antenna type. Then

set the DiSEqC version and press OKWRFRQWඈQXH

You can set up to four satellites (if available) for

version v1.0 and sixteen satellites for version v1.1

on the next screen. Press OK button to scan the first

satellite in the list.

Analogue: If Analogue broadcast search option is

turned on, the TV will search for analogue broadcasts

after other initial settings are completed.

After the initial settings are completed TV will start

to search for available broadcasts of the selected

broadcast types.

While the search continues current scan results will

be displayed at the bottom of the screen. After all the

available stations are stored, Channels menu will be

displayed. You can edit the channel list according to

your preferences using the Edit tab options or press

the Menu button to quit and watch TV.

While the search continues a message may appear,

asking whether you want to sort channels according

to the LCN(*). Select Yes and press OK to confirm.

(*) LCN is the Logical Channel Number system that organizes

available broadcasts in accordance with a recognizable

channel number sequence (if available).

Note: Do not turn off the TV while initializing first time

installation. Note that, some options may not be available

depending on the country selection.

Media Playback via USB Input

You can connect 2.5” and 3.5” inch (HDD with external power

supply) external hard disk drives or USB memory stick to your

TV by using the USB inputs of the TV.

IMPORTANT! Back up the files on your storage devices

before connecting them to the TV. Manufacturer will

not be responsible for any file damage or data loss.

Certain types of USB devices (e.g. MP3 Players)

or USB hard disk drives/memory sticks may not be

compatible with this TV. The TV supports FAT32 and

NTFS disk formatting but recording will not be available

with NTFS formatted disks.

While formatting USB hard drives which have

more than 1TB (Tera Byte) storage space you may

experience some problems in the formatting process.

Wait a little while before each plugging and unplugging

as the player may still be reading files. Failure to do

so may cause physical damage to the USB player

and the USB device itself. Do not pull out your drive

while playing a file.

You can use USB hubs with your TV’s USB inputs.

External power supplied USB hubs are recommended

in such a case.

It is recommended to use the TV’s USB input(s)

directly, if you are going to connect a USB hard disk.

Note: When viewing image files the Media Browser menu

can only display 1000 image files stored on the connected

USB device.

USB Recording

Recording a Programme

IMPORTANT: When using a new USB hard disk

drive, it is recommended that you first format the

disk using your TV’s Format Disk option in the

TV>Recordings>Settings menu.

To record a programme, you should first connect a USB

disk to your TV while the TV is switched off. You should

then switch on the TV to enable the recording feature.

To use recording your USB drive should have 2 GB free

space and be USB 2.0 compatible. If the USB drive

is not compatible an error message will be displayed.

To record long duration programmes such as movies, it

is recommended to use USB Hard disk drives (HDD’s).

Recorded programmes are saved into the connected

USB disk. If desired, you can store/copy recordings

onto a computer; however, these files will not be

available to be played on a computer. You can play

the recordings only via your TV.

Lip Sync delay may occur during the timeshifting. Radio

record is supported. The TV can record programmes

up to ten hours.

Recorded programmes are split into 4GB partitions.

If the writing speed of the connected USB disk is not

sufficient, the recording may fail and the timeshifting

feature may not be available.

It is recommended to use USB hard disk drives for

recording HD programmes.

Do not pull out the USB/HDD during a recording. This

may harm the connected USB/HDD.

If the AC cord is unplugged while there is an active

USB-recording timer setting, it will be cancelled.

Multipartition support is available. A maximum of two

different partitions are supported. The first partition

of the USB disk is used for USB Recording ready

features. It also must be formatted as the primary

English - 11 -

partition to be used for the USB Recording ready

features.

Some stream packets may not be recorded because

of signal problems, as a result sometimes videos may

freeze during playback.

Record, Play, Pause, Display (for playlist dialogue) keys

can not be used when teletext is on. If a recording starts

from timer when teletext is on, teletext is automatically

turned off. Also teletext usage is disabled when there

is an ongoing recording or playback.

Timeshift Recording

Press Pause button while watching a broadcast to

activate timeshifting mode. In timeshifting mode, the

programme is paused and simultaneously recorded to

the connected USB disk.

Press Play button again to resume the paused

programme from where you stopped. Press the Stop

button to stop timeshift recording and return to the

live broadcast.

Timeshift cannot be used while in radio mode.

You can use the timeshift rewind feature after resuming

normal playback or fast forward option.

Instant Recording

Press Record button to start recording an event

instantly while watching a programme. You can press

Record button on the remote control again to record

the next event after selecting the next programme from

within the electronic programme guide. Press Stop

button to cancel instant recording.

You can not switch broadcasts during the recording

mode. While recording a programme or during the

timeshifting, a warning message appears on the screen

if your USB device speed is not sufficient.

Watching Recorded Programmes

Select Recordings from the TV menu. Select a

recorded item from the list (if previously recorded).

Press the OK button to view the Options menu. Select

an option then press OK button.

Note: Viewing main menu and menu items will not be available

during the playback.

Press the Stop button to stop a playback and return

to the Recordings.

Slow Forward

If you press Pause button while watching recorded

programmes, the slow forward feature will be available.

You can use Fast Forward button to slow forward.

Pressing Fast Forward button consecutively will

change slow forwarding speed.

Recording Configuration

Select the Settings tab in the TV>Recordings menu

to configure the recording settings and press OK.

Format Disk: You can use the Format Disk option for

formatting the connected USB disk. Your PIN will be

required to use the Format Disk feature.

Note: Default PIN could have been set to 0000 or 1234. If you

have defined the PIN(is requested depending on the country

selection) during the First Time Installation use the PIN that

you have defined.

IMPORTANT: Formatting your USB drive will erase

ALL the data on it and it’s file system will be converted

to FAT32. In most cases operation errors will be fixed

after a format but you will lose ALL your data.

If “USB disk writing speed too slow to record”

message is displayed on the screen while starting a

recording, try restarting the recording. If you still get

the same error, it is possible that your USB disk does

not meet the speed requirements. Try connecting

another USB disk.

Media Browser

You can play back music and movie files and display

photo files stored on a USB storage device by

connecting it to your TV. Connect a USB storage device

to one of the USB inputs located on the side of the TV.

After connecting a USB storage device to your TV

Media Browser menu will be displayed on the screen.

You can access the content of the connected USB

device any time later from the Sources menu. Select

the related USB input option from this menu and press

OK. Then select the file of your choice and press OK

to display or play it back.

You can set your Media Browser preferences by using

the Settings menu. Settings menu can be accessed

via the information bar which is displayed on the

bottom of the screen when pressed the Info button

while playing back a video file or displaying a picture

file. Press the Info button, highlight the gear wheel

symbol positioned on the right side of the information

bar and press OK. Picture Settings, Sound Settings,

Media Browser Settings and Options menus will be

available. The contents of these menus may change

according to the type of the currently open media file.

Only Sound Settings menu will be available while

playing back audio files.

Loop/Shuffle Mode Operation

Start playback and activate

All files in the list will be

continuously played in

original order

Start playback and activate

The same file will be

played continuously

(repeat)

Start playback and activate

All files in the list will be

played once in random

order

Start playback and activate

All files in the list will be

continuously played in

the same random order

To use the functions on the information bar highlight the

symbol of the function and press OK. To change the

status of a function highlight the symbol of the function

English - 12 -

and press OK as much as needed. If the symbol is

marked with a red cross, that means it is deactivated.

Custom Boot Up Logo

You can personalize your TV and see your favourite

image or photo on the screen each time your TV boots

up. To do this, copy your favourite image files into a

USB disk and open them in the Media Browser. Select

USB input from the Sources menu and press OK.

When you have chosen the desired image, highlight

it and press OK to view it in full screen. Press the

Info button, highlight the gear wheel symbol on the

information bar and press OK. Select Options and

press OK to enter. Set Boot Logo option will be

available. Highlight it and press OK again to choose the

image as custom boot logo. A confirmation message

will be displayed. Select Yes and press OK again. If

the image is suitable(*) you will see it on the screen

during the TV’s next boot up.

Note: If you perform a First Time Installation the TV will

return to using the default logo, if any.

(*) Images should have an aspect ratio of 16:9 and they should

be in .jpg, .jpeg or .jpe file formats. Only files with sizes no

greater then 300KB are supported. The image cannot be set as

boot logo, which’s resolution doesn’t appear on the info banner.

FollowMe TV

With your mobile device you can stream the current

broadcast from your smart TV using the FollowMe

TV feature. Install the appropriate Smart Center

application to your mobile device. Start the application.

For further information on using this feature refer to

the instructions of the application you use.

Note: Depending on model, your TV may not support this

function. The application may not be compatible with all mobile

devices. UHD (4K, Ultra HD) channels are not supported and

both of the devices must be connected to the same network.

CEC

This function allows to control the CEC-enabled

devices, that are connected through HDMI ports by

using the remote control of the TV.

The CEC option in the Settings>System>More menu

should be set as Enabled at first. Press the Source

button and select the HDMI input of the connected

CEC device from the Sources List menu. When

new CEC source device is connected, it will be listed

in source menu with its own name instead of the

connected HDMI ports name(such as DVD Player,

Recorder 1 etc.).

The TV remote is automatically able to perform the

main functions after the connected HDMI source has

been selected. To terminate this operation and control

the TV via the remote again, press and hold the “0-

Zero” button on the remote control for 3 seconds.

You can disable the CEC functionality by setting the

related option under the Settings>System>More

menu accordingly.

The TV supports ARC (Audio Return Channel). This

feature is an audio link meant to replace other cables

between the TV and an audio system (A/V receiver or

speaker system).

When ARC is active, the TV does not mute its other

audio outputs automatically. You will need to decrease

TV volume to zero manually if you wish to hear the

ARC audio only (same as optical or co-axial digital

audio outputs). If you want to change connected

device’s volume level, you should select that device

from the source list. In that case volume control keys

are directed to connected audio device.

Note: ARC is supported only via the HDMI2 input.

System Audio Control

Allows an Audio Amplifier/Receiver to be used with

the TV. The volume can be controlled using the

remote control of the TV. To activate this feature set

the Speakers option in the Settings>System>More

menu as Amplifier. The TV speakers will be muted

and the sound of the watched source will be provided

from the connected sound system.

Note: The audio device should support System Audio Control

feature and CEC option should be set as Enabled.

E-Manual

You can find instructions for your TV’s features in the

E-Manual.

To access the E-Manual, enter Settings menu, select

Manuals and press OK. For quick access press Menu

button and then Info button.

By using the directional buttons select a desired

category. Every category includes different topics.

Select a topic and press OK to read instructions.

To close the E-Manual screen press the Exit or Menu

button.

Note: Depending on model, your TV may not support this

function. The contents of the E-Manual may vary according

to the model.

English - 13 -

Settings Menu Contents

Picture Menu Contents

Mode

You can change the picture mode to suit your preference or requirements. Picture mode can

be set to one of these options: Cinema, Game(optional), Sports, Dynamic and Natural.

Contrast

Adjusts the light and dark values on the screen.

Brightness

Adjusts the brightness values on the screen.

Sharpness

Sets the sharpness value for the objects displayed on the screen.

Colour

Sets the colour value, adjusting the colours.

Energy Saving

For setting the Energy Saving to Custom, Minimum, Medium, Maximum, Auto,

Screen Off or Off.

Note: Available options may differ depending on the selected Mode.

Backlight

This setting controls the backlight level. The backlight function will be inactive if the

Energy Saving is set to an option other than Custom.

Advanced Settings

Dynamic

Contrast

You can change the dynamic contrast ratio to desired value.

Noise Reduction

If the signal is weak and the picture is noisy, use the Noise Reduction setting to reduce

the amount of noise.

Colour Temp

Sets the desired colour temperature value. Cool, Normal, Warm and Custom options

are available.

White Point

If the Colour Temp option is set as Custom, this setting will be available. Increase the

‘warmth’ or ‘coolness’ of the picture by pressing Left or Right buttons.

Picture Zoom

Sets the desired image size format.

Picture Shift

This option may be available depending on the Picture Zoom setting. Highlight and

press OK, then use directional buttons to shift the picture upwards or downwards.

Film Mode

Films are recorded at a different number of frames per second to normal television programmes.

Turn this feature on when you are watching films to see the fast motion scenes clearly.

Skin Tone

Skin tone can be changed between -5 and 5.

Colour Shift

Adjust the desired colour tone.

HDMI Full Range

While watching from a HDMI source, this feature will be visible. You can use this feature

to enhance blackness in the picture.

PC Position

Appears only when the input source is set to VGA/PC.

Autoposition

Automatically optimizes the display. Press OK to optimize.

H Position

This item shifts the image horizontally to the right hand side or left hand side of the screen.

V Position

This item shifts the image vertically towards the top or bottom of the screen.

Dot Clock

Dot Clock adjustments correct the interference that appear as vertical banding in dot

intensive presentations like spreadsheets or paragraphs or text in smaller fonts.

Phase

Depending on the input source(computer etc.) you may see a hazy or noisy picture on

the screen. You can use phase to get a clearer picture by trial and error.

Reset

Resets the picture settings to factory default settings (except Game mode).

While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture menu

while in PC mode.

English - 14 -

Sound Menu Contents

Volume

Adjusts the volume level.

Equalizer

Selects the equalizer mode. Custom settings can be made only when in User mode.

Balance

Adjusts whether the sound comes from the left or right speaker.

Headphone

Sets headphone volume.

Please ensure before using headphones that the headphone volume is set to a low

level, to prevent damage to your hearing.

Sound Mode

You can select a sound mode (If the viewed channel supports).

AVL (Automatic

Volume Limiting)

Sets the sound to obtain fixed output level between programmes.

Headphone/Lineout

When you connect an external amplifier to your TV using the headphone jack, you can

select this option as Lineout. If you have connected headphones to the TV, set this

option as Headphone.

Please ensure before using headphones that this menu item is set to Headphone. If it

is set to Lineout, the output from the headphone socket will be set to maximum which

could damage your hearing.

Dynamic Bass

Enables or disables the Dynamic Bass.

Surround sound

Surround sound mode can be changed as On or Off.

Digital Out

Sets digital out audio type.

Network Menu Contents

Network Type

Disable the network connection or change the connection type.

Scan Wireless

Networks

Start a search for wireless networks. This option will be available if the Network Type

is set as Wireless Device.

Press WPS on your

wifi router

If your modem/router device has WPS, you can directly connect to it using this option.

Highlight this option and press OK. Go to your modem/router device and press the

WPS button on it to make the connection. This option will be available if the Network

Type is set as Wireless Device.

Internet Speed Test

Start a speed test to check your connection bandwidth. The result will be displayed on

the screen when finished.

Advanced Settings

Change the IP and DNS configurations of your TV.

Wake On

Enable or disable this feature by setting it as On or Off.

Note: For detailed information on the options of this menu refer to the Connectivity section.

Installation Menu Contents

Automatic channel

scan (Retune)

Displays automatic tuning options. D. Aerial: Searches and stores aerial DVB stations.

D. Cable: Searches and stores cable DVB stations. Analogue: Searches and stores

analogue stations. 6DWHOOඈWH6HDUFKHVDQGVWRUHVVDWHOOඈWHVWDWඈRQV

Manual channel

scan

This feature can be used for direct broadcast entry.

Network channel

scan

Searches for the linked channels in the broadcast system. D. Aerial: Searches for aerial

network channels. D. Cable: Searches for cable network channels. Satellite: Searches

for satellite network channels.

Analogue fine tune

You can use this setting for fine tuning analogue channels. This feature is not available

if no analogue channels are stored and if currently watched channel is not an analogue

channel.

English - 15 -

Satellite Settings

Displays satellite settings. Satellite list: Displays available satellites. You can Add,

Delete satellites or Edit satellite settings on the list. Antenna installation: You can

change satellite antenna settings and/or start a satellite scan.

Installation Settings

(optional)

Displays installation settings menu. Standby Search (*): Your TV will search for new or

missing channels while in standby. Any new found broadcasts will be shown. Dynamic

Channel Update(*): If this option is set as Enabled, the changes on the broadcasts

such as frequency, channel name, subtitle language etc., will be applied automatically

while watching.

(*) Availability depends on model.

Clear Service List

Use this setting to clear channels stored. This setting is visible only when the Country

option is set to Denmark, Sweden, Norway or Finland.

Select Active

Network

This setting allows you to select only the broadcasts within the selected network to be

listed in the channel list. This feature is available only for the country option of Norway.

Signal Information

You can use this menu item to monitor signal related information such as signal level/

quality, network name etc for available frequencies.

First time installation

Deletes all stored channels and settings, resets TV to factory settings.

System Menu Contents

Conditional Access

Controls conditional access modules when available.

Language

You may set a different language depending on the broadcaster and the country.

Privacy Settings (*)

Manage your privacy privileges for smart TV related applications. Press OK to enter

the menu and set according to your preferences.

Parental

Enter correct password to change parental settings. You can easily adjust Menu Lock,

Maturity Lock, Child Lock or Guidance in this menu. You can also set a new PIN

or change the Default CICAM PIN using the related options.

Note: Some menu options may not be available depending on the country selection in the First Time

Installation. Default PIN could have been set to 0000 or 1234. If you have defined the PIN(is requested

depending on the country selection) during the First Time Installation use the PIN that you have defined.

Date/Time

Sets date and time.

Sources

Edit the names, enable or disable selected source options.

Accessibility

Displays accessibility options of the TV.

Hard of Hearing

Enables any special feature sent from the broadcaster.

Audio

Description

A narration track will be played for the blind or visually impaired audience. Press OK

to see all available Audio Description menu options. This feature is available only if

the broadcaster supports it.

Note: Audio description sound feature is not available in recording or time shifting mode.

Netflix

If this feature is supported by your TV, you can view your ESN(*) number and deactivate

Netflix.

(*) ESN number is an unique ID number for Netflix, created especially to identify your TV.

Note:)RU.YਟGHRVWUHDPਟQJDPਟQਟPXP0EVਟQWHUQHWFRQQHFWਟRQVSHHGਟVUHTXਟUHG±)RUDQ

H[DPSOHRIWKHUHTXਟUHPHQWVIRUVWUHDPਟQJ.FRQWHQW\RXPD\IਟQGPRUHਟQIRUPDWਟRQRQWKH1HWIOਟ[

ZHEVਟWHKWWSVKHOSQHWIOਟ[FRPHQQRGH:KHQ \RX VWDUW WR VWUHDP YਟGHR FRQWHQW YਟD WKH

ਟQWHUQHWWKHTXDOਟW\RI \RXU FRQQHFWਟRQ ZਟOOEHDQDO\VHGDQGWKHIXOO +' RU .TXDOਟW\PD\WDNHD

VKRUWWਟPH WREHUHDOਟVHG RUਟQWKHHYHQWRIDVORZFRQQHFWਟRQQRWEHSRVVਟEOH<RXVKRXOGFKHFN

\RXUਟQWHUQHWFDSDEਟOਟWਟHVZਟWK\RXUਟQWHUQHWSURYਟGHUਟI\RXDUHDWDOOXQVXUH

Displays other setting options of the TV.

Menu Timeout

Changes timeout duration for menu screens.

Standby LED

If set as Off the standby LED will not light up when the TV is in standby mode.

HBBTV (*)

You can enable or disable this feature by setting it as On or Off.

Software

Upgrade

Ensures that your TV has the latest firmware. Press OK to see the menu options.

English - 16 -

Application

Version

Displays current software version.

Subtitle Mode

This option is used to select which subtitle mode will be on the screen (DVB subtitle /

Teletext subtitle) if both is available. Default value is DVB subtitle. This feature is available

only for the country option of Norway.

Auto TV OFF

Sets the desired time for the TV to automatically go into standby mode when not being

operated. This option can be set from 1 to 8 hours in steps of 1 hour. You can also

disable this option by setting as Off.

%ඈVV.H\

Biss is a satellite signal scrambling system that is used for some broadcasts. If you

need to enter Biss key on a broadcast, you can use this setting. Highlight Biss Key and

press OK to enter keys on the desired broadcast.

Store Mode

Select this mode for store display purposes. Whilst Store Mode is enabled, some items

in the TV menu may not be available.

AVS (Audio

Video Sharing)

AVS feature allows you to share files stored on your smartphone or tablet pc. If you have

a compatible smartphone or tablet pc and the appropriate software is installed, you can

share/play photos on your TV. See instructions of your sharing software for more information.

Power Up Mode

This setting configures the power up mode preference. Last State and Standby options

are available.

Virtual Remote

Enable or disable the virtual remote feature.

CEC

With this setting you can enable and disable CEC functionality completely. Press Left

or Right button to enable or disable the feature.

CEC Auto Power

This function allows the connected HDMI-CEC compatible device to turn on the TV

and switch to its input source automatically. Press Left or Right button to enable or

disable the feature.

Speakers

To hear the TV audio from the connected compatible audio device set as Amplifier.

You can use the remote control of the TV to control the volume of the audio device.

6KRZ$OO&RRNඈHV

(*)

'ඈVSOD\VDOOVDYHGFRRNඈHV

Delete All Coo-

NඈHV(*)

'HOHWHVDOOVDYHGFRRNඈHV

OSS

Displays Open Source Software license information.

(*) These features may not be available depending on the model of your TV and the selected country in the First Time Installation.

English - 17 -

General TV Operation

Using the Channel List

The TV sorts all stored stations in the channel list. You

can edit this channel list, set favourites or set active

stations to be listed by using the Channels menu

options. Press the OK button to open the channel list.

You can filter the listed channels or make advanced

changes in the current list using the Filter and Edit

tab options. Highlight the tab you want and press OK

to see available options.

Managing the Favourite Lists

You can create four different lists of your favourite

channels. Enter the TV>Channels menu or press

the OK button in order to open the Channels menu.

Highlight the Edit tab and press OK to see the editing

options and select the Tag/Untag channel option.

Select the desired channel on the list by pressing the

OK button while the channel is highlighted. You can

make multiple choices. You can also use the Ta g/

Untag all option to select all channels on the list.

Then press Back/Return button to return to the Edit

menu options. Select Add/Remove Favourites option

and press the OK button again. Favourite channel list

options will be displayed. Set the desired list option

to On. The selected channel/s will be added to the

list. In order to remove a channel or channels from a

favourite list follow the same steps and set the desired

list option to Off.

You can use the filtering function in the Channels menu

to filter the channels in the channel list permanently

according to your preferences. For instance, using the

options of the Filter tab, you can set one of your four

favourite lists to be displayed every time the channel

list is opened.

Configuring Parental Settings

The Parental menu options can be used to prohibit

users from viewing of certain programmes, channels

and using of menus. These settings are located in the

Settings> System>Parental menu.

To display parental lock menu options, a PIN should be

entered. After coding the correct PIN, Parental menu

will be displayed.

Menu Lock: This setting enables or disables access

to all menus or installation menus of the TV.

Maturity Lock: If this option is set, TV gets the maturity

information from the broadcast and if this maturity level

is disabled, prohibits access to the broadcast.

Note: If the country option in the First Time Installation is

set as France, Italy or Austria, Maturity Lock’s value will be

set to 18 as default.

Child Lock: If this option is set to On, the TV can only

be controlled by the remote control. In this case the

control buttons on the TV will not work.

Internet Lock: If this option is set to ON, the internet

using applications will be disabled. Set to OFF to

release these applications again.

Set PIN: Defines a new PIN number.

Default CICAM PIN: This option will appear as greyed

out if no CI module is inserted into the CI slot of the

TV. You can change the default PIN of the CI CAM

using this option.

Note: Default PIN could have been set to 0000 or 1234. If you

have defined the PIN(is requested depending on the country

selection) during the First Time Installation use the PIN that

you have defined.

Some options may not be available depending on the model

and/or on the country selection in the First Time Installation.

Electronic Programme Guide

By means of electronic programme guide function of

your TV you can browse the event schedule of the

currently installed channels on your channel list. It

depends on the related broadcast whether this feature

is supported or not.

To access the programme guide, press the Guide

button on your remote. You can also use the Guide

option under TV menu.

There are 2 different types of schedule layouts

available, Timeline Schedule and Now/Next. To

switch between these layouts highlight the tab with

the name of the alternative layout on the upper side

of the screen and press OK.

Use the directional buttons to navigate through the

programme guide. Use the Back/Return button to

use the tab options on the upper side of the screen.

Timeline Schedule

In this layout option, all events of the listed channels will

be displayed by timeline. You can use the directional

buttons to scroll through the list of the events. Highlight

an event and press OK to display event options menu.

Press Back/Return button to use available tab options.

Highlight Filter tab and press OK to see the filtering

options. To change the layout highlight Now/Next and

press OK. You can use the Previous Day and Next

Day options to display the events of the previous and

next day.

Highlight Extras tab and press OK to access below

options.

Highlight Genre: Displays Highlight Genre menu.

Select a genre and press OK. The events in the

programme guide matching the selected genre will

be highlighted.

Guide Search: Displays searching options. Using

these options, you can search the programme guide

database in accordance with the selected criteria.

Matching results will be listed.

Now: Displays current event of the highlighted

channel.

English - 18 -

Zoom: Highlight and press OK to see events in a

wider time interval.

Now/Next Schedule

In this layout option, only the current and next events

of the listed channels will be displayed. You can use

the directional buttons to scroll through the list of the

events.

Press Back/Return button to use available tab options.

Highlight Filter tab and press OK to see the filtering

options. To change the layout highlight Timeline

Schedule and press OK.

Event Options

Use the directional buttons to highlight an event

and press OK button to display Options menu. The

following options are available.

Select Channel: Using this option, you can switch

to the selected channel in order to watch it. The

programme guide will be closed.

More Info: Display detailed information on the selected

event. Use up and down directional buttons to scroll

through the text.

Set Timer on Event / Delete Timer on Event: Select

Set Timer on Event option and press OK. You can set

timers for future events. To cancel an already set timer,

highlight that event and press the OK button. Then

select Delete Timer on Event option. The timer will

be cancelled.

Record / Delete Rec. Timer:

Select the Record

option and press the OK button. If the event is going

to be broadcasted at a future time, it will be added

to Timers list to be recorded. If the selected event is

being broadcasted at the moment, recording will start

immediately.

To cancel an already set record timer, highlight that

event and press the OK button and select the option

Delete Rec. Timer. The record timer will be cancelled.

IMPORTANT: Connect a USB disk to your TV while the TV

is switched off. You should then switch on the TV to enable

the recording feature.

Notes: You cannot switch to any other channel while there is

an active recording or timer on the current channel.

It is not possible to set timer or record timer for two or more

individual events at the same time interval.

Integrated Catch-Up Services

You can enjoy Freeview Play catch-up TV services

that work directly through the electronic programme

guide. Whilst you are on a channel use the directional

buttons to scroll back in time through the timeline-

based guide. You will see contents from last few days.

Available catch-up contents may change according

to broadcasters and will be marked with a play icon.

Highlight the content you want to play back and press

the OK button.

Make sure that your TV is connected to your home

network in order to use the catch-up services. For

further information regarding this matter and other

requirements for Freeview Play services refer to the

Connectivity and Freeview Play Platform sections.

Teletext Services

Press the Text button to enter. Press again to activate

mix mode, which allows you to see the teletext page

and the TV broadcast at the same time. Press once

more to exit. If available, sections in the teletext pages

will become colour-coded and can be selected by

pressing the coloured buttons. Follow the instructions

displayed on the screen.

Digital Teletext

Press the Text button to view digital teletext information.

Operate it with the coloured buttons, cursor buttons

and the OK button. The operation method may differ

depending on the contents of the digital teletext. Follow

the instructions displayed on the digital teletext screen.

When the Text button is pressed again, the TV returns

to television broadcast.

Software Upgrade

Your TV is capable of finding and updating the firmware

automatically via the broadcast signal or via Internet.

Software upgrade search via user interface

On the main menu select Settings>System and then

More. Navigate to Software upgrade and press the

OK button. Then select Scan for upgrade and press

OK button to check for a new software upgrade.

If a new upgrade is found, it starts to download the

upgrade. After the download is completed, a warning

will be displayed, press OK button to complete software

upgrade process and restart TV.

3 AM search and upgrade mode

Your TV will search for new upgrades at 3:00 o’clock

if Automatic scanning option is set to Enabled and if

the TV is connected to an aerial signal or to Internet. If

a new software is found and downloaded successfully,

it will be installed at the next power on.

Note: Do not unplug the power cord while led is blinking during

the reboot process. If the TV fails to come on after the upgrade,

unplug, wait for two minutes then plug it back in.

All updates are automatically controlled. If a manual search

is carried out and no software is found then this is the current

version.

Troubleshooting & Tips

TV will not turn on

Make sure the power cord is plugged in securely to a

wall outlet. Press the Power button on the TV.

Poor picture

• Check if you have correctly tuned the TV.

• Low signal level can cause picture distortion. Please

check antenna connections.

• Check if you have entered the correct channel

frequency if you have performed manual tuning.

English - 19 -

No picture

• TV is not receiving any signal. Make sure the correct

source has been selected.

• Is the antenna connected properly?

• Is the antenna cable damaged?

• Are suitable plugs used to connect the antenna?

• If you are in doubt, consult your dealer.

No sound

• Check if the TV sound is muted. Press the Mute

button or increase the volume to check.

• Sound may be coming from only one speaker. Check

the balance settings from Sound menu.

Remote control - no operation

• The batteries may be exhausted. Replace the

batteries.

• The batteries maybe inserted incorrectly. Refer to

the section “Inserting the Batteries into the Remote”.

No signal on an input source

• It is possible that no device is connected.

• Check the AV cables and connections from your

device.

• Check the device is switched on.

Recording unavailable

To record a programme, you should first correctly

connect a USB storage device to your TV, while the

TV is switched off. You should then switch on the TV to

enable recording feature. If you cannot record, check

the storage device is correctly formatted and there is

sufficient space.

USB is too slow

If a “USB disk writing speed too slow to record”

message is displayed on the screen while starting a

recording, try restarting the recording. If you still get

the same error, it is possible that your USB storage

device does not meet the speed requirements. Try

using a different USB storage device.

PC Input Typical Display Modes

Index 5HVROXWඈRQ Frequency

640x480 60Hz

2 640x480 75Hz

3 800x600 56Hz

4 800x600 60Hz

 800x600 72Hz

6 800x600 75Hz

7 1024x768 60Hz

8 1024x768 70Hz

9 1024x768 75Hz

10 1152x864 75Hz

11 1280x768 60Hz

12 1360x768 60Hz

13 1280x960 60Hz

14 1280x1024 60Hz

 1280x1024 75Hz

16 1400x1050 60Hz

17 1440x900 60Hz

18 1440x900 75Hz

19 1920x1080 60Hz

The following

table is an

illustration of

some of the

typical video

display modes.

Your TV may not

support all

resolutions.

AV and HDMI Signal Compatibility

Source Supported Signals Available

Back

PAL O

SECAM O

NTSC4.43 O

NTSC3.58 O

YPbPr

480i, 480p 60Hz O

576i, 576p 50Hz O

720p, 1080i 50Hz,60Hz O

HDMI

480i, 480p 60Hz O

576i, 576p 50Hz O

720p 50Hz,60Hz O

1080i 50Hz,60Hz O

1080p

24Hz, 25Hz, 30Hz,

50Hz, 60Hz

(X: Not Available, O: Available)

In some cases a signal on the TV may not be displayed

properly. The problem may be an inconsistency with

standards from the source equipment (DVD, Set-top

box, etc. ). If you do experience such a problem please

contact your dealer and also the manufacturer of the

source equipment.

English - 20 -

Supported File Formats for USB Mode

Video File Formats

Extension Video Codec Max. Resolution & Frame Rate & Bit Rate

.mpg, .mpeg, .dat, .vob

MPEG1/2, H.264, VC1

H.264: 1080Px2@30fps - 50Mbps, 1080P@60fps -

50Mbps Other: 1080P@60fps - 50Mbps

.ts, .trp, .m2ts

.avi MPEG1/2, MPEG4, H.264, MJPEG

.mp4, .m4a, .m4v, .mov, .qt,

.3gp, .3g2, .3gpp

MPEG1/2, H.263, MPEG4, H.264

.mkv MPEG 1/2, MPEG4, H.264

.flv Sorenson Sp, MPEG4, H.264

.ogm, .ogg MPEG1/2, MPEG4

.asf, .wmv MPEG4, WMV3, VC1

.rm, .rmvb RV30, RV40

.webm VP9, VP8

.mp4, .mov, .3gpp, .3gp,

MPEG transport stream,

.ts,.trp, .tp, .mkv

HEVC/H.265

Picture File Formats

Extension Specification Resolution (width x height)

.jpg, .jpeg

Baseline 8192 x 8192

Progressive 3000 x 3000

.bmp

RGB 1/4/8/16/24/32 bit

8192 x 8192

RLE 4/8 bit

.gif

87a

89a (Only 1 picture at animation format)

.png

Grayscale, 24/32 bit per pixel

Interlace format

Progressive

.tiff, .tif Tagged image file format

.webp

Lossy compression VP8 key frame version number support 0~3

Lossless compression

Audio File Formats

Extension Format

.mp3 .mp3

.ac3 .ac3

.aac .AAC

.wma .WMA

.amr .AMR-NB, .AMR-WB

.wav . MPEG La, .AAC, .PCM

.flac . FLAC

English - 21 -

Subtitle File Formats

External Subtitles

Extension Specification

.ssa SubStation Alpha

.ass Advanced SubStation Alpha

.srt Subripper

.sub Micro DVD / SubViewer

.sub + .idx VOBSub

.txt Micro DVD / TMPlayer / MPL2

.mpl MPL2

.smi Sami

.jss JACOSUB

.ttml TTML

.txt / .sub DVDSUBTITLE

.lrc -

Internal Subtitles

Extension

Specification

.mkv VOBSub

.mkv ASS / SSA / TEXT

.dat, .mpg, .mpeg, .vob DVD Subtitle

.mp4 DVD Subtitle, TEXT

Supported DVI Resolutions

:KHQFRQQHFWඈQJ GHYඈFHV WR\RXU79¶VFRQQHFWRUV E\ XVඈQJ'9, FRQYHUWHU FDEOH'9,WR +'0, FDEOH QRW

VXSSOඈHG\RXFDQUHIHUWRWKHIROORZඈQJUHVROXWඈRQඈQIRUPDWඈRQ

56Hz 60Hz 66Hz 70Hz 72Hz +]

640x400

640x480 xx xx

800x600 xx xxx

832x624 x

1024x768 xxxxx

1152x864 xxx

1152x870 x

1280x768 xx

1360x768 x

1280x960 xx

1280x1024 xx

1400x1050 xx

1440x900 xx

1600x1200 x

1680x1050 x

1920x1080 x

English - 22 -

Connectivity

Wired Connectivity

To Connect to a Wired Network

• You must have a modem/router connected to an

DFWඈYHEURDGEDQGFRQQHFWඈRQ

• &RQQHFW \RXU79 WR \RXU PRGHPURXWHUYඈDDQ

(WKHUQHW FDEOH7KHUH ඈV D /$1SRUWDW WKH UHDU

(back) of your TV.







1. Broadband ISP connection

2. LAN (Ethernet) cable

3. LAN input on the rear side of the TV

7R FRQIඈJXUHZඈUHGVHWWඈQJVUHIHU WR WKH1HWZRUN

VHFWඈRQඈQWKH Settings menu.

• <RXPඈJKWEHDEOHWRFRQQHFW\RXU79WR\RXU/$1

GHSHQGඈQJRQ\RXUQHWZRUN¶VFRQIඈJXUDWඈRQ,QVXFK

a case, use an Ethernet cable to connect your TV

GඈUHFWO\WRWKHQHWZRUNZDOORXWOHW





1. Network wall socket

2. LAN input on the rear side of the TV

Configuring Wired Device Settings

Network Type

The Network Type can be selected as Wired Device,

Wireless Device or Disabled, in accordance with the

active connection to the TV set. Select this as Wired

Device if you are connecting via an Ethernet cable.

Internet Speed Test

Highlight Internet Speed Test and press the OK

button. TV will check the internet connection bandwidth

and display the result when complete.

Advanced Settings

Highlight Advanced Settings and press the OK

button. On the next screen you can change the IP and

DNS settings of the TV. Highlight the desired one and

press Left or Right button to change the setting from

Automatic to Manual. Now you can enter the Manual

IP and / or Manual DNS values. Select the related item

in the drop down menu and enter the new values using

the numeric buttons of the remote. Highlight Save and

press the OK button to save settings when complete.

Wireless Connectivity

To Connect to a Wireless Network

The TV cannot connect to the networks with a hidden

SSID. To make your modem’s SSID visible, you should

change your SSID settings via the modem’s software.



1. Broadband ISP connection

A Wireless-N router (IEEE 802.11a/b/g/n) with

simultaneous 2.4 and 5 GHz bands is designed to

increase bandwidth. These are optimized for smoother

and faster HD video streaming, file transfers and

wireless gaming.

• 7KH IUHTXHQF\DQGFKDQQHO GඈIIHU GHSHQGඈQJ RQ

the area.

• 7KH WUDQVPඈVVඈRQVSHHGGඈIIHUV GHSHQGඈQJ RQ WKH

GඈVWDQFHDQG QXPEHURIREVWUXFWඈRQV EHWZHHQWKH

WUDQVPඈVVඈRQ SURGXFWVWKH FRQIඈJXUDWඈRQ RI WKHVH

SURGXFWVWKHUDGඈRZDYHFRQGඈWඈRQVWKHOඈQHWUDIIඈF

DQGWKHSURGXFWVWKDW\RXXVH7KHWUDQVPඈVVඈRQPD\

DOVREHFXWRIIRUPD\JHWGඈVFRQQHFWHGGHSHQGඈQJ

RQWKHUDGඈRZDYHFRQGඈWඈRQV'(&7SKRQHVRUDQ\

other WLANEDSSOඈDQFHV7KHVWDQGDUGYDOXHVRI

WKHWUDQVPඈVVඈRQVSHHGDUHWKHWKHRUHWඈFDOPD[ඈPXP

YDOXHVIRUWKHZඈUHOHVVVWDQGDUGV7KH\DUHQRWWKH

DFWXDOVSHHGVRIGDWDWUDQVPඈVVඈRQ

English - 23 -

• 7KHORFDWඈRQZKHUHWKHWUDQVPඈVVඈRQඈVPRVWHIIHFWඈYH

GඈIIHUVGHSHQGඈQJRQWKHXVDJHHQYඈURQPHQW

• 7KH:ඈUHOHVVIHDWXUHRIWKH79VXSSRUWVDEJ

 QW\SH PRGHPV ,W ඈV KඈJKO\ UHFRPPHQGHGWKDW

\RXVKRXOGXVH WKH ,(((QFRPPXQඈFDWඈRQ

SURWRFRO ඈQRUGHU WR DYRඈG DQ\ SRVVඈEOHSUREOHPV

ZKඈOHZDWFKඈQJYඈGHRV

• You must change your modem’s SSID when there

DUHDQ\RWKHUPRGHPVDURXQGZඈWKWKHVDPH66,'

<RXFDQHQFRXQWHUFRQQHFWඈRQSUREOHPVRWKHUZඈVH

8VHDZඈUHGFRQQHFWඈRQඈI\RXH[SHUඈHQFHSUREOHPV

ZඈWKDZඈUHOHVVFRQQHFWඈRQ

Configuring Wireless Device Settings

Open the Network menu and select Network Type as

:ඈUHOHVV'HYඈFHWRVWDUWFRQQHFWඈRQSURFHVV

+ඈJKOඈJKW6FDQ:ඈUHOHVV1HWZRUNVRSWඈRQDQGSUHVV

OKWRVWDUWDVHDUFKIRUDYDඈODEOHZඈUHOHVVQHWZRUNV

$OOIRXQGQHWZRUNVZඈOOEHOඈVWHG+ඈJKOඈJKW\RXUGHVඈUHG

QHWZRUNIURPWKHOඈVWDQGSUHVVOK to connect.

Note: If the modem supports N mode, you should set N

mode settings.

,IWKHVHOHFWHGQHWZRUNඈVSDVVZRUGSURWHFWHGHQWHU

WKHFRUUHFWNH\E\XVඈQJWKHYඈUWXDONH\ERDUG<RXFDQ

XVHWKඈVNH\ERDUGYඈDWKHGඈUHFWඈRQDOEXWWRQVDQGWKH

OK button on the remote control.

:DඈWXQWඈOWKH,3DGGUHVVඈVVKRZQRQWKHVFUHHQ

7KඈVPHDQVWKDWWKHFRQQHFWඈRQ ඈVQRZHVWDEOඈVKHG

7R GඈVFRQQHFWIURPD ZඈUHOHVV QHWZRUN KඈJKOඈJKW

Network Type DQGSUHVV/HIWRU5ඈJKWEXWWRQVWRVHW

as 'ඈVDEOHG.

If your router has WPS, you can directly connect to the

modem/router without entering a password or adding

the network first. Highlight Press WPS on your wifi

router option and press OK. Go to your modem/router

device and press the WPS button on it to make the

connection. You will see a connection confirmation on

your TV once the devices have paired. Select OK to

proceed. No further configuration is required.

+ඈJKOඈJKWInternet Speed Test and press the OK button

WR FKHFN\RXU ඈQWHUQHW FRQQHFWඈRQ VSHHG +ඈJKOඈJKW

Advanced 6HWWඈQJV and press the OK button to

RSHQWKHDGYDQFHGVHWWඈQJPHQX8VHGඈUHFWඈRQDODQG

QXPHUඈFEXWWRQVWRVHW+ඈJKOඈJKWSave and press the

OKEXWWRQWRVDYHVHWWඈQJVZKHQFRPSOHWH

2WKHU,QIRUPDWඈRQ

7KH VWDWXVRI WKH FRQQHFWඈRQ ZඈOO EH GඈVSOD\HGDV

Connected or Not Connected and the current IP

DGGUHVVඈIDFRQQHFWඈRQඈVHVWDEOඈVKHG

&RQQHFWඈQJWR\RXUPREඈOHGHYඈFHYඈDWLAN

• ,I\RXU PREඈOHGHYඈFH KDVWLAN feature, you can

FRQQHFWඈWWR\RXU79YඈDDURXWHUඈQRUGHUWRDFFHVV

WKH FRQWHQWඈQ \RXU GHYඈFH )RU WKඈV \RXUPREඈOH

GHYඈFHPXVWKDYHDQDSSURSUඈDWHVKDUඈQJVRIWZDUH

 &RQQHFW\RXU79WR\RXUURXWHUIROORZඈQJWKHVWHSV

PHQWඈRQHGඈQWKHVHFWඈRQVDERYH

 $IWHUZDUGVFRQQHFW\RXUPREඈOHGHYඈFHWRWKHURXWHU

DQGWKHQDFWඈYDWHWKHVKDUඈQJVRIWZDUHRQ\RXUPREඈOH

GHYඈFH7KHQVHOHFWIඈOHVWKDW\RXZDQWWRVKDUHZඈWK

your TV.

 ,I WKHFRQQHFWඈRQ ඈV HVWDEOඈVKHG FRUUHFWO\ \RX ZඈOO

EHDEOHWRDFFHVVWKHVKDUHGIඈOHVඈQVWDOOHGRQ\RXU

PREඈOH GHYඈFHYඈD WKH$96DXGඈRYඈGHR VKDUඈQJ

feature of your TV.

 +ඈJKOඈJKWWKHAVSRSWඈRQඈQWKHSources menu and

press OKDYDඈODEOH PHGඈD VHUYHU GHYඈFHV ඈQWKH

QHWZRUNZඈOOEHGඈVSOD\HG6HOHFW\RXUPREඈOHGHYඈFH

and press the OK EXWWRQWRFRQWඈQXH

• If available, you can download a virtual remote

controller application from the server of your mobile

device application provider.

Note: This feature may not be supported on all mobile

devices.

Wake ON

Wake-on-LAN (WoL) and Wake-on-Wireless LAN

(WoWLAN) are standards that allow a device to be

turned on or woken up by a network message. The

message is sent to the device by a program executed

on a remote device connected to the same local area

network, such as a smartphone.

Your TV is WoL and WoWLAN compatible. This feature

might be disabled during the First Time Installation

process. To enable this feature set the Wake On option

in the Network menu as On. It is necessary that both

the device, from which the network message will be

sent to the TV, and the TV are connected to the same

network. Wake On feature is only supported for Android

OS devices and can only be used via YouTube and

Netflix applications.

In order to use this feature the TV and the remote

device should be connected at least once while the

TV is on. If the TV is powered off, the connection

should be re-established, the next time it is switched

on. Otherwise this feature will be unavailable. This

does not apply, when the TV is switched into the

standby mode.

The performance of some devices in the market, may

vary due to the software architecture. In order to use

Wake On feature with a better performance, please

make sure that your device has latest firmware version.

If you want your TV to consume less power in standby

mode, you can disable this feature by setting the Wake

On option as Off.

Wireless Display

Wireless Display is a standard for streaming video and

sound content. This feature provides the ability to use

your TV as wireless display device.

English - 24 -

Using with mobile devices

There are different standards which enable sharing of

screens including graphical, video and audio content

between your mobile device and TV.

Plug the wireless USB dongle to TV first, if the TV

doesn’t have internal WLAN feature.

Then press the Source button on the remote and

switch to Wireless Display source.

A screen appears stating that the TV is ready for

connection.

Open the sharing application on your mobile device.

These applications are named differently for each

brand, refer to the instruction manual of your mobile

device for detailed information.

Scan for devices. After you select your TV and connect,

the screen of your device will be displayed on your TV.

Note: This feature can be used only if the mobile device

supports this feature. If you experience problems with the

connection check if the operating system version you use

supports this feature. There may be incompatibility problems

with the operating system versions which are released after

the production of this TV. Scanning and connecting processes

differ according to the programme you use.

Connectivity Troubleshooting

Wireless Network Not Available

• Ensure that any firewalls of your network allow the

TV wireless connection.

• 7U\VHDUFKඈQJIRUZඈUHOHVVQHWZRUNVDJDඈQXVඈQJWKH

Network menu screen.

If the wireless network does not function properly, try

using the wired network in your home. Refer to the

Wired Connectivity section for more information on

the process.

,IWKH79GRHVQRWIXQFWඈRQXVඈQJWKHZඈUHGFRQQHFWඈRQ

check the modem (router). If the router does not have a

SUREOHPFKHFNWKHඈQWHUQHWFRQQHFWඈRQRI\RXUPRGHP

Connection is Slow

6HHWKHඈQVWUXFWඈRQERRNRI\RXUZඈUHOHVVPRGHPWR

JHWඈQIRUPDWඈRQRQWKHඈQWHUQDOVHUYඈFHDUHDFRQQHFWඈRQ

VSHHGVඈJQDOTXDOඈW\DQGRWKHUVHWWඈQJV<RXQHHGWR

KDYHDKඈJKVSHHGFRQQHFWඈRQIRU\RXUPRGHP

Disruption during playback or slow reactions

You could try the following in such a case:

Keep at least three meters distance from microwave

ovens, mobile telephones, bluetooth devices or any

other WLAN compatible devices. Try changing the

active channel on the WLAN router.

Internet Connection Not Available / $XGඈR9ඈGHR

6KDUඈQJ Not Working

,IWKH0$&DGGUHVVDXQඈTXHඈGHQWඈIඈHUQXPEHURI\RXU

3&RUPRGHPKDVEHHQSHUPDQHQWO\UHJඈVWHUHGඈWඈV

SRVVඈEOHWKDW\RXU79PඈJKWQRWFRQQHFWWRWKHඈQWHUQHW

,Q VXFKD FDVH WKH 0$& DGGUHVVඈVDXWKHQWඈFDWHG

HDFKWඈPHZKHQ\RXFRQQHFWWRWKHඈQWHUQHW7KඈVඈVD

SUHFDXWඈRQDJDඈQVWXQDXWKRUඈ]HGDFFHVV6ඈQFH\RXU

79KDV ඈWVRZQ 0$&DGGUHVV \RXUඈQWHUQHW VHUYඈFH

SURYඈGHUFDQQRWYDOඈGDWHWKH0$&DGGUHVVRI\RXU79

)RUWKඈVUHDVRQ\RXU79FDQQRWFRQQHFWWRWKHඈQWHUQHW

&RQWDFW \RXUඈQWHUQHW VHUYඈFH SURYඈGHU DQG UHTXHVW

ඈQIRUPDWඈRQRQKRZWRFRQQHFWDGඈIIHUHQWGHYඈFHVXFK

DV\RXU79WRWKHඈQWHUQHW

,W ඈVDOVR SRVVඈEOH WKDW WKH FRQQHFWඈRQPD\QRW EH

DYDඈODEOHGXH WRD IඈUHZDOOSUREOHP ,I\RXWKඈQNWKඈV

FDXVHV \RXUSUREOHP FRQWDFW \RXU ඈQWHUQHW VHUYඈFH

SURYඈGHU$IඈUHZDOOPඈJKWEHWKHUHDVRQRIDFRQQHFWඈYඈW\

DQGGඈVFRYHU\ SUREOHP ZKඈOHXVඈQJWKH 79ඈQ$XGඈR

9ඈGHR6KDUඈQJPRGHRUZKඈOHEURZVඈQJYඈD$XGඈR9ඈGHR

6KDUඈQJIHDWXUH

Invalid Domain

(QVXUHWKDW\RXKDYHDOUHDG\ORJJHGRQWR\RXU3&ZඈWK

DQDXWKRUඈ]HG XVHUQDPHSDVVZRUG DQGDOVR HQVXUH

WKDW\RXUGRPDඈQඈVDFWඈYHSUඈRUWRVKDUඈQJDQ\IඈOHVඈQ

\RXUPHGඈDVHUYHUSURJUDPRQ\RXU3&,IWKHGRPDඈQ

ඈVඈQYDOඈGWKඈVPඈJKWFDXVHSUREOHPVZKඈOHEURZVඈQJ

IඈOHVඈQ$XGඈR9ඈGHR6KDUඈQJPRGH

Using Audio Video Sharing Network Service

$XGඈR 9ඈGHR6KDUඈQJ IHDWXUH XVHV D VWDQGDUG WKDW

HDVHVWKHYඈHZඈQJSURFHVVRI GඈJඈWDOHOHFWURQඈFVDQG

PDNHV WKHPPRUH FRQYHQඈHQW WR XVH RQDKRPH

network.

7KඈV VWDQGDUGDOORZV \RX WR YඈHZ DQGSOD\SKRWRV

PXVඈFDQGYඈGHRVVWRUHGඈQWKHPHGඈDVHUYHUFRQQHFWHG

to your home network.

1. Server Software Installation

The $XGඈR9ඈGHR6KDUඈQJ feature cannot be used if the

server programme is not installed onto your PC RUඈI

WKHUHTXඈUHGPHGඈDVHUYHUVRIWZDUHඈVQRWඈQVWDOOHGRQWR

WKHFRPSDQඈRQGHYඈFH. Prepare your PC with a proper

server programme.

&RQQHFWWRD:ඈUHGRU:ඈUHOHVV1HWZRUN

See the Wired/Wireless Connectivity chapters for

detailed configuration information.

3. Enable Audio Video Sharing

Enter the Settings>System>More menu and

enable the AVS option.

3OD\6KDUHG)ඈOHVYඈD0HGඈD%URZVHU

+ඈJKOඈJKWWKHAVSRSWඈRQඈQWKHSources menu by using

the directional buttons and press OK. $YDඈODEOHPHGඈD

VHUYHUGHYඈFHVඈQWKHQHWZRUNZඈOOEHOඈVWHG6HOHFWRQH

and press OK WR FRQWඈQXH The media browser will

then be displayed.

Refer to the Media Browser menu section for further

information on file playback.

If a problem occurs with the network, switch your

television off at the wall socket and back on again.

Trick mode and jump are not supported with the $XGඈR

9ඈGHR6KDUඈQJ feature.

English - 25 -

PC/HDD/Media Player or any other devices that are

compatible should be used with a wired connection for

higher playback quality.

Use a LAN connection for quicker file sharing between

other devices like computers.

Note: There may be some PC’s which may not be able to

utilize the $XGਟR9ਟGHR6KDUਟQJ feature due to administrator

and security settings (such as business PC’s).

Apps

You can access the applications installed on your TV

from Apps menu. Highlight an app and press OK to

launch.

In order to manage the apps installed on your TV, add

new apps from the market or to see all available apps

in full screen mode highlight the Add More option

and press OK. Using this menu option you can add

an installed app to Home menu, launch or remove it.

Removed apps will no longer be accessible from Apps

menu. You can also add new apps from the market.

In order to enter the market highlight the shopping

basket logo located on the upper left side of the screen

and press OK. Available apps in the market will be

displayed. Use directional buttons to highlight an app

and press OK. Highlight Add to Apps option and press

OK again to add the selected app to Apps menu.

For quick access to Add More menu you can press the

Internet button on the remote, if this button is available.

Notes:

Possible application dependent problems may be caused by

the content service provider.

Third party internet services may change, be discontinued or

restricted at any time.

Freeview Play Platform

Freeview Play platform provides catch-up TV and

On Demand services. Simply press the Freeview

Play button on your remote control to connect to the

Freeview Play platform.

The Freeview Play platform can also be accessed from

the Home and Apps menus. Press Menu button and

select Home or Apps. Then highlight Freeview Play

and press the OK button.

You will have to agree to the terms and conditions for

Freeview Play services first if you did not agree them

during the First Time Installation. Highlight Yes and

press OK on the remote to confirm and proceed.

Integrated TV Player applications will be displayed.

Select one and press the OK button. Then select a

content that you want to play back and press the OK

button to watch.

Catch-up contents can also be accessed and played

back directly from the TV Guide. Refer to the section

Electronic Programme Guide for more information.

Requirements

The Freeview Play services may only be used if the

following requirements are fulfilled:

• Connecting the TV to the internet. A minimum broad-

band speed of 2Mbps is required for proper operation

of catch up and on demand services.

• Agreeing to the terms and conditions of Freeview

Play

Note: Freeview Play platform usage will count towards any

monthly broadband data allowance. Only selected channels

provide 7-day catch up.

Internet Browser

To use the internet browser, enter the AppsPHQXIඈUVW

7KHQ ODXQFKWKH ඈQWHUQHW EURZVHU DSSOඈFDWඈRQ ZKඈFK

KDVDQRUDQJHFRORXUHGORJRZඈWKHDUWKV\PERORQඈW

In the initial screen of the browser, the thumbnails of

the predefined (if any) links to web sites available will

be displayed as Speed Dial options along with the

Edit Speed Dial and the Add to Speed Dial options.

To navigate the web browser, use the directional

buttons on the remote or a connected mouse. To see

the browser options bar, move the cursor to the top of

the page or press the Back/Return button. History,

Tabs and Bookmarks options and the browser bar

which contains previous/next buttons, the refresh

button, the address/search bar, the Speed Dial and

the Vewd buttons are available.

To add a desired website to the Speed Dial list for

quick access, move the cursor to the top of the page

or press the Back/Return button. The browser bar

will appear. Highlight the Speed Dial -

button and

press the OK button. Then select Add to Speed Dial

option and press the OK button. Fill in the blanks for

Name and Address, highlight OK and press the OK

button to add. Whilst you are on the site you wish to

add to the Speed Dial list, highlight the Vewd button

and press the OK button. Then highlight Add to Speed

Dial option in the submenu and press the OK button

again. Name and Address will be filled automatically

according to the site you are visiting. Highlight OK and

press the OK button to add.

You can also use the Vewd menu options to manage

the browser. Highlight the Vewd button and press the

OK button to see available page specific and general

options.

There are various ways to search or visit websites

using the web browser.

Enter the address of a website(URL) into the search/

address bar and highlight the Submit button on the

virtual keyboard and press the OK button to visit the

site.

Enter keyword/s into the search/address bar and

highlight the Submit button on the virtual keyboard

English - 26 -

and press the OK button to start a search for the

related websites.

Highlight a Speed Dial thumbnail and press the OK

button to visit the related website.

Your TV is compatible with USB mice. Plug your mouse

or wireless mouse adaptor into the USB input of your

TV for easier and quicker navigation.

Some web pages include flash content. These are not

supported by the browser.

Your TV does not support any download processes

from the internet via the browser.

All sites on the internet might not be supported.

According to the site; content problems may occur.

In some circumstances video contents might not be

able to be played.

HBBTV System

HbbTV (Hybrid Broadcast Broadband TV) is a new

industry standard that seamlessly combines TV

services delivered via broadcast with services delivered

via broadband and also enables access to Internet only

services for consumers using connected TVs and set-

top boxes. Services delivered through HbbTV include

traditional broadcast TV channels, catch-up services,

video-on-demand, electronic programme guide,

interactive advertising, personalisation, voting, games,

social networking and other multimedia applications.

HbbTV applications are available on channels where

they are signalled by the broadcaster (currently various

channels on Astra broadcast HbbTV applications). The

broadcaster marks one application as “autostart” and

this one is started by the platform automatically. The

autostart applications are generally launched with a

small red button icon to notify the user that there is

an HbbTV application on that channel. Press the red

button to open the application page. After the page is

displayed you can go back to the initial red button icon

state by pressing the red button again. You can toggle

between the red button icon mode and full UI mode

of the application via pressing red button. It should

be noted that the red button switching capability is

provided by the application and some application may

behave differently.

If you switch to another channel while an HbbTV

application is active (either in red button icon mode

or full UI mode), the following scenarios can occur.

• The application can continue running.

• The application can be terminated.

• The application can be terminated and another

autostart red button application can be launched.

HbbTV allows the applications to be retrieved both from

broadband or broadcast. The broadcaster may enable

both ways or one of them. If the platform does not have

an operational broadband connection, the platform

can still launch applications transmitted on broadcast.

The autostart red button applications generally provide

links to other applications. The user then can switch

to other applications by using the links provided.

The applications should provide a way to terminate

themselves, usually Exit button is used for this.

HbbTV applications use keys on the remote control to

interact with the user. When an HbbTV application is

launched, the control of some keys are owned by the

application. For example, numeric channel selection

may not work on a teletext application where the

numbers indicate teletext pages.

HbbTV requires AV streaming capability for the

platform. There are numerous applications providing

VOD (video on demand) and catch-up TV services.

The user can use play, pause, stop, forward, and

rewind keys on the remote control to interact with the

AV content.

Note: You can enable or disable this feature from the

More menu in Settings>System menu. Depending on the

model of your TV and the selected country option in the

First Time Installation this feature might be available in the

Settings>System>Privacy Settings menu instead of the

Settings>System>More menu.

Smart Center

Smart Center is a mobile application running on iOS

and Android platforms. With your tablet or phone,

you can easily stream your favourite live shows and

programmes from your smart TV. Also; you can launch

your applications, use your tablet as a remote control

for your TV and share media files.

Note: Being able to use all functions of this application

depends on the features of your TV.

Getting Started

To be able to use internet based features, your modem/

router must be connected to the internet.

IMPORTANT: Make sure the TV and mobile device

are connected to the same network.

For media sharing feature Audio Video Sharing option

should be enabled(if available). Press the Menu button

on the remote, select Settings>System>More menu

and press OK. Highlight AVS and change as Enabled.

Your TV is ready to connect to your mobile device now.

Install the Smart Center application onto your mobile

device.

Start the Smart Center application. If all connections

are configured properly, you will see your TV’s name on

your mobile device. If your TV’s name doesn’t appear

on the list, wait a while and tap on the Refresh widget.

Select your TV from the list.

Mobile Device screen

On the main screen you can find tabs to access

various features.

The application retrieves actual channel list from TV

first when it starts.

English - 27 -

MY CHANNELS: The programmes of first four

channels from the channel list retrieved from the TV

are shown. You can change the listed channels. Press

on the channel thumbnail and hold. A list of channels

will be displayed and you can choose your desired

channel to be replaced.

TV: You can watch content through the TV tab. In

this mode you can navigate through the channel list

retrieved from your TV and click on thumbnails to view

the detail pages.

RECORDINGS: You can view your active recordings(if

available) and reminders through this tab. To delete

any item, simply press on the delete icon found on

each row.

EPG(Electronic programme guide): You can view

the broadcast schedules of selected channel lists

through this tab. You can also navigate through

channels by pressing on the selected channel on the

EPG grid. Please note that updating / refreshing the

EPG information may take a while depending on your

network and web service quality.

Note: Internet connection is required for WEB based EPG

information.

SETTINGS: Configure the application to your liking.

You can change;

Auto-lock (Only in IOS): The screen of the device

automatically turns off after a certain amount of

time. Default is off, which means the screen will

always stay on.

Auto-enable FollowMeTV: FollowMeTV function (if

available) will start automatically when this setting

is enabled. Default is disabled.

Auto-connection to TV: When enabled, your

mobile device will automatically connect to last

connected TV and skips the TV search screen.

Change TV (Only in IOS): Shows the currently

connected TV. You can press on this setting to go to

the “TV search” screen and change to a different TV.

Edit custom channel list: You can edit your custom

channel list using this setting.

Choose channel list source: You can choose the

channel list source to be used in the application. The

options are “TV List” and “Custom List”. Additionally

you can activate “Remember my choice” option to

set the selected channel list source as a constant

choice. In this case if the selected source is available

it will be used in the application.

Version No: Displays the current version of the

application.

Detail Page

To open detail page tap on a programme. On the

detail page screen you can get detailed information

of the programmes you select. There are “Details”,

“Cast&Crew” and “Videos” tabs to find on this page.

DETAILS: This tab provides summary and information

about the selected programme. Also there are links

to Facebook and twitter pages of the programme

selected.

CAST&CREW: Shows all the people contributed to

the current programme.

VIDEOS: Provides videos on YouTube related to the

selected programme.

Note: For some functions an internet connection may be

required.

FollowMe TV Feature (if available)

Tap on the FOLLOW ME TV widget located at the

bottom left of the screen of your mobile device to

change the layout for FollowMe TV feature.

Tap the play icon to start streaming of the content from

the TV to your mobile device. Available if your device

is in your routers operation range.

Mirror Mode

This mode of FollowMe TV feature is enabled by

default and allows streaming the content from any other

selected TV sources and Media Browser.

Notes:

Note that only digital(DVB-T/C/S) SD and HD channels are

supported.

Multilanguage audio support and subtitle on/off features are

not functional.

The streaming performance may change depending on the

quality of your connection.

Media Share Page

To access the Media Share widget tap on the Up-

arrow on the bottom left side of the screen.

If the Media Share widget is pressed, a screen is

displayed where you can select the media file type to

share with your TV.

Note: Not all image file formats are supported. This function

will not work if Audio Video Sharing feature is not supported.

Smart Remote Feature

You can use your mobile device as a remote control

for your TV once it has connected to the TV. To use

smart remote’s full features tap on the Up-arrow on

the bottom left side of the screen.

Voice Recognition

You can tap on the Microphone(

) widget and

manage your application, giving voice commands

such as “Volume Up/Down!”, “Programme Up/Down!”.

Note: This feature is only for android based devices available.

Keyboard Page

The keyboard page can be opened in two ways; by

pressing the Keyboard(

) widget on the application

screen or automatically by receiving a command

from the TV.

English - 28 -

Requirements

1. Smart TV

2. Network connection

3. Mobile Device based on Android or iOS platform

(Android OS 4.0 or higher; IOS 6 or higher version)

4. Smart Center app.(to be found on online

application stores based on Android and iOS

platforms)

 Router modem

6. USB storage device in FAT32 format (required for

USB Recording feature, if available)

Notes:

)RU$QGURਟG GHYਟFHV 1RUPDOPGSਟ /DUJHKGSਟ DQG ([WUD

/DUJH[KGSਟVFUHHQVਟ]HVDUHVXSSRUWHG'HYਟFHVZਟWK´RU

VPDOOHUVFUHHQVਟ]HVDUHQRWVXSSRUWHG

)RUਟ26GHYਟFHVDOOVFUHHQVਟ]HVDUHVXSSRUWHG

User interface of the Smart Center application is subject to

change according to version installed on your device.

DVB functionality information

This DVB receiver is only suitable for use in the country

which it was designed to be used in.

Although this DVB receiver conforms to the latest DVB

specifications at the time of manufacture, we cannot

guarantee compatibility with future DVB transmissions

due to changes that may be implemented in broadcast

signals and technologies.

Some digital television functions may not be available

in all countries.

We continually strive to improve our products;

therefore, specifications may change without prior

notice.

For advice on where to purchase accessories,

please contact the store where you purchased your

equipment.

English - 29 -

Important Instructions

For your own safety read the following instructions carefully before

attempting to connect this unit to the mains

supply.

MAINS (AC) OPERATION

The wires in the mains lead are coloured in accordance with the following code :

GREEN

YELLOW

(Earth)

(if there is earth cable)

FUSE

BROWN

(Live)

BLUE

(Neutral)

IMPORTANT

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings

identifying the terminals in your plug, proceed as follows:

The wire which is coloured green and yellow must be connected to the terminal which is marked with the letter E,

or by the earth symbol, or coloured green or green and yellow.

The wire which is coloured blue or black must be connected to the terminal which is marked with the letter N or

coloured Black.

The wire which is coloured brown or red must be connected to the terminal which is marked with the letter L or

coloured Red.

For continued protection against risk of fire, replace only with same type and rating of fuse (ASTA approved 5A

250VAC fuse).

CAUTION

TO PREVENT ELECTRIC SHOCK DISCONNECT FROM THE MAINS BEFORE REMOVING COVER. NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

SAFETY PRECAUTION

THIS EQUIPMENT MUST BE DISCONNECTED FROM THE MAINS WHEN NOT IN USE. DO NOT ALLOW THIS

UNIT TO BE EXPOSED TO RAIN OR MOISTURE.

English - 30 -

TR: İşbu belgede; VESTEL Elektronik Sanayi ve Ticaret

A.Ş., telsiz ekipmanı tipi TFT IDTV ’nin 2014/53/AB

sayılı direktife uygun olduğunu beyan eder. AB uygunluk

beyanının tam metni internet adresinde mevcuttur:

doc.vosshub.com

EN: Hereby, VESTEL Elektronik Sanayi ve Ticaret A.Ş.,

declares that the radio equipment type TFT IDTV is in

compliance with Directive 2014/53/EU. The full text of the

EU declaration of conformity is available at the following

internet address: doc.vosshub.com

BG: С настоящото VESTEL Elektronik Sanayi ve Ticaret A.Ş.,

декларира, че този тип радиосъоръжение TFT IDTV е

в съответствие с Директива 2014/53/ЕС. Цялостният

текст на ЕС декларацията за съответствие може да се

намери на следния интернет адрес: doc.vosshub.com

CZ: Tímto VESTEL Elektronik Sanayi ve Ticaret A.Ş.,

prohlašuje, že typ rádiového zařízení TFT IDTV je

v souladu se směrnicí 2014/53/EU. Úplné znění EU

prohlášení o shodě je k dispozici na této internetové

adrese: doc.vosshub.com

DA: Hermed erklærer VESTEL Elektronik Sanayi ve

Ticaret A.Ş., at radioudstyrstypen TFT IDTV er i

overensstemmelse med direktiv 2014/53/EU. EU-

overensstemmelseserklæringens fulde tekst kan ndes

på følgende internetadresse: doc.vosshub.com

DE: Hiermit erklärt VESTEL Elektronik Sanayi ve Ticaret

A.Ş., dass der Funkanlagentyp TFT IDTV der Richtlinie

2014/53/EU entspricht. Der vollständige Text der

EU-Konformitätserklärung ist unter der folgenden

Internetadresse verfügbar: doc.vosshub.com

EL: Με την παρούσα ο/η VESTEL Elektronik Sanayi ve Ticaret

A.Ş., δηλώνει ότι ο ραδιοεξοπλισμός TFT IDTV πληροί

την οδηγία 2014/53/ΕΕ. Το πλήρες κείμενο της δήλωσης

συμμόρφωσης ΕΕ διατίθεται στην ακόλουθη ιστοσελίδα

στο διαδίκτυο: doc.vosshub.com

ES: Por la presente, VESTEL Elektronik Sanayi ve Ticaret

A.Ş., declara que el tipo de equipo radioeléctrico TFT

IDTV es conforme con la Directiva 2014/53/UE. El

texto completo de la declaración UE de conformidad

está disponible en la dirección Internet siguiente:

doc.vosshub.com

ET: Käesolevaga deklareerib VESTEL Elektronik Sanayi

ve Ticaret A.Ş., et käesolev raadioseadme tüüp

TFT IDTV vastab direktiivi 2014/53/EL nõuetele. ELi

vastavusdeklaratsiooni täielik tekst on kättesaadav

järgmisel internetiaadressil: doc.vosshub.com

FI: VESTEL Elektronik Sanayi ve Ticaret A.Ş., vakuuttaa,

että radiolaitetyyppi TFT IDTV on direktiivin 2014/53/

EU mukainen. EU-vaatimustenmukaisuusvakuutuksen

täysimittainen teksti on saatavilla seuraavassa

internetosoitteessa: doc.vosshub.com

FR: Le soussigné, VESTEL Elektronik Sanayi ve Ticaret A.Ş.,

déclare que l’équipement radioélectrique du type TFT

IDTV est conforme à la directive 2014/53/UE. Le texte

complet de la déclaration UE de conformité est disponible

à l’adresse internet suivante: doc.vosshub.com

HR: VESTEL Elektronik Sanayi ve Ticaret A.Ş., ovime

izjavljuje da je radijska oprema tipa TFT IDTV u skladu

s Direktivom 2014/53/EU. Cjeloviti tekst EU izjave o

sukladnosti dostupan je na sljedećoj internetskoj adresi:

doc.vosshub.com

HU: VESTEL Elektronik Sanayi ve Ticaret A.Ş., igazolja, hogy

a TFT IDTV típusú rádióberendezés megfelel a 2014/53/

EU irányelvnek. Az EU-megfelelőségi nyilatkozat

teljes szövege elérhető a következő internetes címen:

doc.vosshub.com

IT: Il fabbricante, VESTEL Elektronik Sanayi ve Ticaret A.Ş.,

dichiara che il tipo di apparecchiatura radio TFT IDTV

è conforme alla direttiva 2014/53/UE. Il testo completo

della dichiarazione di conformità UE è disponibile al

seguente indirizzo Internet: doc.vosshub.com

LT: Aš, VESTEL Elektronik Sanayi ve Ticaret A.Ş., patvirtinu,

kad radijo įrenginių tipas TFT IDTV atitinka Direktyvą

2014/53/ES. Visas ES atitikties deklaracijos tekstas

prieinamas šiuo interneto adresu: doc.vosshub.com

LV: Ar šo VESTEL Elektronik Sanayi ve Ticaret A.Ş., deklarē,

ka radioiekārta TFT IDTV atbilst Direktīvai 2014/53/ES.

Pilns ES atbilstības deklarācijas teksts ir pieejams šādā

interneta vietnē: doc.vosshub.com

M T: B’dan, VESTEL Elektronik Sanayi ve Ticaret A.Ş.,

niddikjara li dan it-tip ta’ tagħmir tar-radju TFT IDTV

huwa konformi mad-Direttiva 2014/53/UE. It-test kollu

tad-dikjarazzjoni ta’ konformità tal-UE huwa disponibbli

f’dan l-indirizz tal-Internet li ġej: doc.vosshub.com

NL:

Hierbij verklaar ik, VESTEL

Elektronik Sanayi ve Ticaret

A.Ş., dat het type radioapparatuur TFT IDTV conform

is met Richtlijn 2014/53/EU. De volledige tekst van de

EU-conformiteitsverklaring kan worden geraadpleegd op

het volgende internetadres: doc.vosshub.com

PL: VESTEL Elektronik Sanayi ve Ticaret A.Ş., niniejszym

oświadcza, że typ urządzenia radiowego TFT IDTV jest

zgodny z dyrektywą 2014/53/UE. Pełny tekst deklaracji

zgodności UE jest dostępny pod następującym adresem

internetowym: doc.vosshub.com

PT: O(a) abaixo assinado(a) VESTEL Elektronik Sanayi ve

Ticaret A.Ş.,

declara que o presente tipo de equipamento

de rádio TFT IDTV está em conformidade com a

Diretiva 2014/53/UE. O texto integral da declaração de

conformidade está disponível no seguinte endereço de

Internet: doc.vosshub.com

RO: Prin prezenta, VESTEL Elektronik Sanayi ve Ticaret

A.Ş., declară că tipul de echipamente radio TFT IDTV

este în conformitate cu Directiva 2014/53/UE. Textul

integral al declarației UE de conformitate este disponibil

la următoarea adresă internet: doc.vosshub.com

SK: VESTEL Elektronik Sanayi ve Ticaret A.Ş., týmto

vyhlasuje, že rádiové zariadenie typu TFT IDTV je v

súlade so smernicou 2014/53/EÚ. Úplné EÚ vyhlásenie

o zhode je k dispozícii na tejto internetovej adrese:

doc.vosshub.com

SL: VESTEL Elektronik Sanayi ve Ticaret A.Ş., potrjuje,

da je tip radijske opreme TFT IDTV skladen z

Direktivo 2014/53/EU. Celotno besedilo izjave EU o

skladnosti je na voljo na naslednjem spletnem naslovu:

doc.vosshub.com

SV: Härmed försäkrar VESTEL Elektronik Sanayi ve

Ticaret A.Ş., att denna typ av radioutrustning TFT

IDTV överensstämmer med direktiv 2014/53/

EU. Den fullständiga texten till EU-försäkran om

överensstämmelse finns på följande webbadress:

doc.vosshub.com

English - 31 -

VESA WALL MOUNT MEASUREMENTS

Hole Paern

Sizes (mm)

W H

200 200

Screw Sizes

Length (X)

min. (mm) 10

max. (mm) 13

Thread (Y) M6

SPECIFICATION

TV Broadcasting

PAL BG/I/DK

SECAM BG/DK

Receiving Channels

VHF (BAND I/III)

- UHF (BAND U) -

HYPERBAND

Digital Reception

Fully integrated digital

terrestrial-cable-

satellite TV (DVB-T-

C-S)

(DVB-T2, DVB-S2

compliant)

Number of Preset

Channels

10 000

Channel Indicator On Screen Display

RF Aerial Input 75 Ohm (unbalanced)

Operating Voltage 220-240V AC, 50Hz.

Audio German+Nicam Stereo

Audio Output Power

(WRMS.) (10% THD)

2 x 8

Power Consumption

(W)

Networked Standby

(W)

< 2

TV Dimensions

DxLxH (with foot)

(mm)

235 x 974 x 627

TV Dimensions

DxLxH (without

foot) (mm)

64/93 x 974 x 572

Display 43”

Operation

temperature and

operation humidity

0ºC up to 40ºC, 85%

humidity max

Product Fiche

Commercial Brand:NORDMENDE

Product No.

10122319

Model No.

NMF43DLEDFSMA

Energy eciency class

A++

Visible screen size

(diagonal,approx.) (inch/cm)

43 inches 108 cm

O n m o d e a v e r a g e p o w e r

consumpon (Wa)

37,0

A n n u a l e n e r g y c o n s u m p  o n

(kWh/annum) (*)

S t a n d b y p o w e r c o n s u m p  o n

(Wa)

0,50

O  m o d e p o w e r c o n s u m p  o n

(Wa)

N/A

Display resoluon (px)

1920x1080

La pagina si sta caricando...

Nordmende NMF43DLEDFSMA Manuale utente

Marca: Nordmende

Modello: NMF43DLEDFSMA

Categoria: TV LCD

Tipo: Manuale utente

Scarica PDF

rapporto

in altre lingue

English: Nordmende NMF43DLEDFSMA User manual

Nordmende NMF43DLEDFSMA Manuale utente

Nordmende NMF43DLEDFSMA Manuale utente

in altre lingue

Altri documenti