Register your product and get support at
WAS6050/05
WAS6050/12
EN User manual 1
Contact information 40
11
Connect a PC
Before you connect the Music Station to a PC:
Ensure that the PC meets the minimum
requirements. (see ‘PC connection
requirements’ on page
30)
Install the WADM (Philips Wireless Audio
Device Manager) on the PC
. (see ‘Install
WADM’ on page
11)
You can choose among two different
modes of connection:
Wired connectio
n (see ‘Create wired
connection’ on page
11)
Wireless connectio
n (see ‘Create wireless
connection’ on page
12)
Install WADM
This chapter shows you how to install the
WADM (Philips Wireless Audio Device
Manager) software. The WADM is necessary to
search and download software updates for the
Music Station.
1 Insert the PC Suite CD into the PC.
2 Follow the instructions on the PC to install
WADM.
3 When the security alert message
(Microsoft Windows Firewall) pops up,
press ‘Unblock’ to allow the WADM
application to run on the PC.
The rewall is still effective and only
allows the WADM to run.
Tip
You can also consult the user manual of the PC and
manually add the WADM application to your list of
programs that are safe to run.
•
Create wired connection
1 Ensure that the Ethernet port on the PC is
enabled.
2 Ensure that the WADM (Philips Wireless
Audio Device Manager) software is
•
•
•
•
È
4 Connect
Connect AC power
Warning
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the Music Station.
The type plate is located on the rear of the product.
•
•
1 Connect the Music Station to the power
supply
Your Music Station turns on and is
ready for use.
Connect a portable audio
device (AUX)
1 Connect an audio cable (not supplied)
from the AUX jack to the portable audio
device.
È
Connect
Eng lish
EN
13
2 Complete the set-up process: Consult the
user manual of the Center how to add a
Station to the Center.
3 Position the Music Station in a suitable
location (within reach of a power socket).
4 Position the Music Station where it is
separated from the Center by no more
than one wall.
Note
Connections that include a router require that the
router is switched on at all times.
•
5 First-time
installation
When you connect the Music Station to the
power supply, the automatic installation process
starts. You must select the languag
e (see ‘Select
language’ on page
13) before you can continue.
Select language
1 When you connect the Music Station to
the power supply for the rst time, wait for
the language selection menu to select your
language.
2 Press to select, then press .
After you set the language, the Music
Station starts the search for a Center
(sold separately).
Tip
After the rst-time language set-up, you can change the
language in the Settings menu (see ‘Change language’
on page 999).
•
Set-up with a Center (sold
separately)
You can stream your audio to the Music Station
from a Philips Center of the WAC series, such
as WAC3500D, WAC7000, or WAC7500.
You can connect the Music Station to the
Center in two different modes:
Infrastructure
Ad-hoc (if you do not have an Internet
connection / PC)
1 Place the Music Station and the Center
side by side on a at and level surface that
is strong enough to support the two units.
È
•
•
First-time installation
Eng lish
EN
-
1
-
2
-
3
in altre lingue
- English: Philips WAS6050/12 User manual
Documenti correlati
Altri documenti
-
Samsung HT-D6750WK Manuale utente
-
Samsung HT-D7500W Manuale utente
-
Yamaha MCX-2000 Manuale del proprietario
-
-
-
Yamaha YSP-2700 Manuale del proprietario
-
-
Yamaha HTR-5069 Manuale del proprietario