Philips NP1100/12 Manuale utente

Categoria
Apparecchiature musicali supplementari
Tipo
Manuale utente
Register your product and get support at
NP1100/05
NP1100/12
EN User manual 3
Contact information 31
3
Mark radio stations as Favorites 16
Listen to Favorite Stations
16
Manually add Internet radio stations
17
Listen to My Media
17
Browse through Internet Radio lists
17
7 Settings 19
Adjust display
19
Adjust DIM settings
19
Adjust brightness
19
Date and time settings
19
Set the time
19
Set the time format
19
Set the date
20
Set sleep timer
20
Set button sound (Clicker)
20
Network setup
20
Create wireless connection
20
Create wired connection
20
Change language
21
8 Maintenance 22
Cleaning 22
Update 22
Update through wireless connection
22
Update through PC connection
22
Restore the default settings
22
9 Technical data 24
Supported audio le formats
24
Supplied accessories
24
PC connection requirements
24
10 Troubleshooting 26
11 Glossary 27
Contents
1 Important 4
Safety 4
Notice 5
Disposal of product and packing
material 6
2 Your Streamium Network Music
Player 8
Overview 8
Front view
8
Top view
8
Rear view
8
Remote control
8
3 Prepare 10
Install remote control batteries
10
Position your NP1100
10
4 Connect 11
Connect audio device
11
Connect AC power
11
First-time setup
11
Create wireless connection
12
Create wired connection
12
5 Turn on / switch to standby 13
6 Play 14
Adjust volume
14
Mute 14
Repeat play
14
Shufe play
14
Stream music from a UPnP device
14
Install Windows Media Player 11
14
Congure a PC to share music
15
Search for audio les (music)
15
Scroll at high speed
15
Quick jump navigation
15
Alphanumeric search
15
Internet radio
16
Listen to Internet radio
16
Contents
Eng l ish
EN
4
g Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
h Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including ampliers) that
produce heat.
i For countries with a polarized mains,
do not defeat the safety purpose of
the polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other. A grounding
type plug has two blades and a third
grounding prong. The wide blade or the
third prong are provided for your safety.
If the provided plug does not t into
your outlet, consult an electrician for
replacement of the obsolete outlet.
Caution: To prevent electric shock, match
the wide blade of the plug to the wide
slot, fully insert.
j Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and the
point where they exit from the apparatus.
k Only use attachments/accessories
specied by the manufacturer.
l Use only with the cart, stand, tripod,
bracket, or table specied by the
manufacturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
1 Important
Safety
Know these safety symbols
This ‘bolt of lightning’ indicates uninsulated
material within your unit may cause an electrical
shock. For the safety of everyone in your
household, please do not remove product
covering.
The ‘exclamation point’ calls attention to
features for which you should read the enclosed
literature closely to prevent operating and
maintenance problems.
WARNING: To reduce the risk of re or electric
shock, this apparatus should not be exposed to
rain or moisture and objects lled with liquids,
such as vases, should not be placed on this
apparatus.
CAUTION: To prevent electric shock, match
wide blade of plug to wide slot, fully insert.
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
EN
5
Warning
Never remove the casing of this NP1100.
Never lubricate any part of this NP1100.
Place this NP1100 on a at, hard and stable surface.
Never place this NP1100 on other electrical
equipment.
Only use this NP1100 indoors. Keep this NP1100 away
from water, moisture and liquid-lled objects.
Keep this NP1100 away from direct sunlight, naked
ames or heat.
Important notes for users in the U.K.
How to connect a plug
The wires in the mains lead are coloured with
the following code: blue = neutral (N), brown
= live (L).
As these colours may not correspond with the
colour markings identifying the terminals in your
plug, proceed as follows:
Connect the blue wire to the terminal
marked N or coloured black.
Connect the brown wire to the terminal
marked L or coloured red.
Do not connect either wire to the earth
terminal in the plug, marked E (or e) or
coloured green (or green and yellow).
Before replacing the plug cover, make
certain that the cord grip is clamped over
the sheath of the lead - not simply over
the two wires.
Mains plug
This apparatus is fitted with an approved 13
Amp plug. To change a fuse in this type of plug
proceed as follows:
a Remove fuse cover and fuse.
b Fix new fuse which should be a BS13625
Amp, A.S.T.A. or BSI approved type.
c Refit the fuse cover.
If the fitted plug is not suitable for your socket
outlets, it should be cut off and an appropriate
plug fitted in its place.
If the mains plug contains a fuse, this should
have a value of 5 Amp. If a plug without a fuse
m Unplug this apparatus during lightning
storms or when unused for long periods
of time.
n Refer all servicing to qualied service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
o Battery usage CAUTION – To prevent
battery leakage which may result in bodily
injury, property damage, or damage to the
unit:
Install all batteries correctly, + and - as
marked on the unit.
Do not mix batteries (old and new or
carbon and alkaline, etc.).
Remove batteries when the unit is not
used for a long time.
p Apparatus shall not be exposed to
dripping or splashing.
q Do not place any sources of danger on
the apparatus (e.g. liquid lled objects,
lighted candles).
r This product may contain lead and
mercury. Disposal of these materials
may be regulated due to environmental
considerations. For disposal or recycling
information, please contact your local
authorities or the Electronic Industries
Alliance: www.eiae.org.
Important
Eng l ish
EN
6
This digital apparatus does not exceed the Class
B limits for radio noise emissions from digital
apparatus as set out in the Radio Interference
Regulations of the Canadian Department of
Communications. This Class B digital apparatus
complies with Canadian ICES-003.
Class II equipment symbol
This symbol indicates that the unit has a double
insulation system.
Hearing Safety
Listen at a moderate volume:
Using headphones at a high volume can impair
your hearing. This product can produce sounds
in decibel ranges that may cause hearing loss for
a normal person, even for exposure less than
a minute. The higher decibel ranges are offered
for those that may have already experienced
some hearing loss.
Sound can be deceiving. Over time your hearing
‘comfort level’ adapts to higher volumes of
sound. So after prolonged listening, what sounds
‘normal’ can actually be loud and harmful to
your hearing. To guard against this, set your
volume to a safe level before your hearing
adapts and leave it there.
To establish a safe volume level:
Set your volume control at a low setting.
Slowly increase the sound until you can hear it
comfortably and clearly, without distortion.
Listen for reasonable periods of time:
Prolonged exposure to sound, even at normally
‘safe’ levels, can also cause hearing loss.
Be sure to use your equipment reasonably and
take appropriate breaks.
Be sure to observe the following guidelines
when using your headphones.
is used, the fuse at the distribution board should
not be greater than 5 Amp.
The severed plug must be disposed off to avoid
a possible shock hazard should it be inserted
into a 13 Amp socket elsewhere.
Norge
Typeskilt finnes på apparatens bakside.
Observer: Nettbryteren er sekundert innkoplet.
Den innebygde netdelen er derfor ikke
fraktoplet nettet så lenge apparatet er tilsluttet
nettkontakten.
For å redusere faren for brann eller elektrisk
støt, skal apparatet, ikke utsettes for regn eller
fuktighet.
Notice
Notice of compliance
For USA:
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses and can radiate radio frequency energy
and, if not installed and used in accordance with
the instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced
radio/TV technician for help.
For Canada:
EN
7
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
Battery disposal information
Batteries (including built-in rechargeable
batteries) contain substances that may pollute
the environment. Always hand the appliance
in at an ofcial collection point to remove any
built-in batteries before you discard the appl
iance. All batteries must be disposed of at an
ofcial collection point.
0984
Listen at reasonable volumes for reasonable
periods of time.
Be careful not to adjust the volume as your
hearing adapts.
Do not turn up the volume so high that you
can’t hear what’s around you.
You should use caution or temporarily
discontinue use in potentially hazardous
situations.
Do not use headphones while operating a
motorized vehicle, cycling, skateboarding, etc.; it
may create a trafc hazard and is illegal in many
areas.
Disposal of product and packing
material
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product, it means the product is
covered by the European Directive 2002/96/EC.
Please be informed about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and
do not dispose of your old product with your
normal household waste. The correct disposal
of your old product will help prevent potential
negative consequences to the environment and
human health.
All redundant packing material has been
omitted. We have done our utmost to make the
packaging easily separable into mono materials.
Please observe the local regulations regarding
the disposal of packing materials.
Important
Eng l ish
EN
8
Rear view
a LINE OUT (red/white) jacks
b DIGITAL OUT (black) jack
c jack
d ETHERNET jack
e POWER SUPPLY jack
Remote control
You can control the NP1100 with the remote
control.
2 Your Streamium
Network Music
Player
Congratulations on your purchase and welcome
to Philips!
To fully benet from the support that Philips
offers, register your product at
www.philips.
com/welcome.
Overview
Front view
a DISPLAY
Top view
a STANDBY - ON
EN
9
o RATE
p (skip back)
q HOME
r SHUFFLE (random play)
s REPEAT
t MUSIC
u INTERNET RADIO
a
b MUSIC SERVICES (optional feature
available in some regions)
c SETTINGS
d DIM (adjust display)
e FAVORITE
f SEARCH
g (navigate)
h OK / (conrm / play/pause)
i (skip forward)
j (stop)
k + VOL -
l MUTE
m CLEAR
n a/A (case shift)
Your Streamium Network Music Player
Eng l ish
EN
10
3 Prepare
Install remote control
batteries
Caution
Risk of explosion! Keep batteries away from heat,
sunshine or re. Never discard batteries in re.
Risk of decreased battery life! Never mix different
brands or types of batteries.
Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
1 Open the battery compartment.
2 Insert two AAA batteries with correct
polarity (+/-) as indicated.
3 Close the battery compartment.
Position your NP1100
Caution
Risk of product damage! Place the NP1100 on a surface
that is level, at, and strong enough to support the
NP1100.
Risk of interference! Keep the NP1100 away from TVs,
VCRs, and other radiation sources.
EN
11
Note
The type plate information is located at the back or the
underside of the NP1100.
First-time setup
When you connect the NP1100 to the power
supply for the rst time, the player shows a
short demo and then displays the language
menu:
1 Press to select the language, then press
.
The display shows the date format
menu.
2 Press to select the date format, then
press
.
The display shows the time format
menu.
3 Press to select the time format, then
press
.
The display shows the date menu.
4 Press to select the date, then press .
The display shows the time menu.
5 Press to select the time, then press .
The display shows the network menu.
6 To complete the setup, continue with one
of the following chapters:
First-time setup: Wireless setu
p (see
‘Create wireless connection’ on page
12)
First-time setup: Wired setu
p (see ‘Create
wired connection’ on page
12)
È
È
È
È
È
4 Connect
Connect audio device
1 Use the supplied red and white audio
cables to connect the AUX IN jacks of the
sound system with the red and white
(see
‘Rear view’ on page
8)LINE OUT jacks
(see ‘Rear view’ on page
8) of the NP1100.
2 Set the source of the sound system to
‘AUX’.
3 Control the sound system as you normally
would.
Connect AC power
Warning
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the NP1100.
1 Connect the NP1100 to the power supply
2 Continue with the steps in chapterFirst-
time setu
p (see ‘First-time setup’ on page
11).
Connect
Eng l ish
EN
12
7 Select (Enable Proxy?) [No (default)].
The NP1100 displays a conrmation
screen that the settings are saved.
È
Tip
After the rst-time set-up, you can change the language,
date and time in the Settings menu.
Create wireless connection
1 Hold ready your network name and
network password or encryption key.
2 Follow the steps in chapter Set up the
player for the rst time (see ‘First-time
setup’ on page
11) until the display shows
the network menu options
[Search for
networks] or [SSID].
3 Press to select [Search for networks],
then press
.
4 Press to select [Wireless], then press
.
5 Press to select your home network
with wireless broadband Internet access,
then press
.
Enter encryption key (if required).
6 Select [Automatic] > (Enable Proxy?) [No
(default)].
The NP1100 displays a conrmation
screen that the settings are saved.
Create wired connection
1 Use the an Ethernet cable (sold separately)
to connect the NP1100 to the router that
is connected to your home network with
broadband Internet access.
2 Ensure that the router is turned on.
3 Follow the steps in chapter Set up the
player for the rst time (see ‘First-time
setup’ on page
11) until the display shows
the network menu options
[Search for
networks] or [SSID].
4 Press to select [Search for networks],
then press
.
5 Press to select [Wired], then press .
6 Select [Automatic] (DHCP).
È
EN
13
5 Turn on / switch
to standby
You can select from the following status options:
On
Standby
The
button on the remote control
can turn on the NP1100.
The NP1100 remembers the last
audio source you selected.
Note
In stop mode, if no buttons are pressed for 20 minutes,
the NP1100 switches to standby.
1 To turn on the NP1100, press .
2 To switch the NP1100 to standby, press .
Turn on / switch to standby
Eng l ish
EN
14
[Repeat all]
All audio les of the current selection
are continuously repeated until
another mode or setting is selected.
[Off] (default)
Shufe play
You can play the audio les of the current
selection in random order (shufed).
1 During play, press SHUFFLE to toggle
shufe on and off.
When you turn shufe on, the current
selection of audio les is played in
random order.
Stream music from a UPnP
device
You can wirelessly stream music to the NP1100
from a connected PC, if you install Windows
Media Player 11 on the PC and congure the
PC to share your music. (If Windows Media
Player 11 is already installed on the PC, you
can skip the installation section and continue
with the conguration. For any other media
players, refer to the instructions supplied with
the player.)
Install Windows Media Player 11
1 On the PC, insert the supplied software
CD.
Installation starts.
If installation does not start, click on
the
icon in your Explorer program.
2 Follow the instructions on the PC to install
Windows Media Player 11.
È
È
È
6 Play
The play / pause and stop operations on the
remote control of the NP1100 are the same
for any music source that you choose:
1 Press HOME.
2 Press to select source, then press .
3 Press , then to select options.
4 Press OK / to play.
Press
OK / to toggle between
pause and play.
5 Press to stop.
Tip
The following chapters explain the play options and
music sources that are available.
Adjust volume
1 During play, press + VOL - to adjust the
volume.
Mute
You can turn off the sound of your audio.
1 During play, press MUTE.
To turn the sound back on, press
MUTE again.
Repeat play
You can repeat one or all audio les of the
current selection.
1 In play mode, press REPEAT to toggle the
repeat function as follows:
[Repeat 1]
The current audio le is continuously
repeated until another mode or
setting is selected.
EN
15
Scroll at high speed
You can nd a le with fast scroll, which scrolls
through all les in the current list. Scroll speed
depends on the length of the list.
1 Ensure that the NP1100 is turned on.
2 When a list is displayed, press and hold
to scroll through the list at high speed.
3 Let go of the button, to stop the scroll.
Quick jump navigation
The quick jump feature of the NP1100 behaves
like the text input method commonly used on
mobile phones.
1 While inside a list, press an alphanumeric
button one or more to select a character.
The quick jump feature displays the
rst object in the current list that
begins with the selected character (e.g.
a track name inside the track list) .
Alphanumeric search
You can search for specic audio les on a
connected UPnP device.
1 Ensure that the NP1100 is turned on.
2 Press HOME > MUSIC.
The display shows the available servers.
3 Press or , then to select server.
The display shows the available lists.
4 Press or , then to select list.
5 Press SEARCH.
The display shows a text box.
6 Press the alphanumeric buttons on the
remote control to enter the search word.
7 Press OK / to start the search.
The NP1100 shows the closest
alphabetical match.
8 To stop the search, press .
To return to the Home menu, press
HOME.
È
È
È
È
È
Congure a PC to share music
You can share music from a PC with the
NP1100. This chapter shows you how to
congure the PC to share music.
1 Follow the instructions to install Windows
Media Player 11.
2 On the PC, click Start > Programs >
Windows Media Player.
3 In the Windows Media Player interface,
right click on the
Library pull-down menu
at the top of the screen and select
Media
sharing....
4 In the Media sharing... pop-up window,
select
Share my media, then conrm with
OK.
When the NP1100 is connected to
your home network, the display shows
the NP1100 with an alert icon:
5 Click on the NP1100.
6 Select Allow, then conrm with OK.
7 On the NP1100, press HOME.
8 Press to select [Music], then press .
The display shows
[Searching for
UPnP servers…], followed by the list
of media servers.
9 Press to select the PC name (the
Windows Media Player adds an identier
after the PC name), then press
.
Search for audio les (music)
You can choose between the following options
to search for specic audio les:
Scroll at high spee
d (see ‘Scroll at high
speed’ on page
15)
Quick jump navigatio
n (see ‘Quick jump
navigation’ on page
15)
Alphanumeric searc
h (see ‘Alphanumeric
search’ on page
15)
È
È
Congure a PC to share music
Eng l ish
EN
16
Note
Internet radio features require broadband Internet
access.
Mark radio stations as Favorites
You can mark Internet radio stations as your
Favourites so next time you want to listen to a
station, it is easy to nd.
1 Ensure that the NP1100 is turned on.
2 Ensure that the NP1100 is connected to
the Internet.
3 When you listen to Internet radio, press
FAVORITE to mark the station.
To return to the Home menu, press
HOME.
The next time you connect to the
Internet radio, the radio station is
shown in the Favorite Station
s (see
‘Listen to Favorite Stations’ on page
16) menu.
Note
Internet radio features require broadband Internet
access.
Tip
You can also place bookmarks for Internet radio
stations when you log on at
www.philips.com/welcome
and on the registered product site click the link
Streamium Management.
Listen to Favorite Stations
When you place bookmarks for Internet radio
stations (see ‘Mark radio stations as Favorites’
on page
16), you can nd them under Favorite
Stations.
1 Ensure that the NP1100 is turned on.
2 Ensure that the NP1100 is connected to
the Internet.
Internet radio
Note
Internet radio features require broadband Internet
access.
Listen to Internet radio
1 Ensure that the NP1100 is turned on.
2 Ensure that the NP1100 is connected to
the Internet.
3 Press INTERNET RADIO to view the
options menu
[Search] (lets you search for Internet
radio stations)
[Favorite Stations] (lists the Internet
radio stations that you have marked
as Favorite Statio
n (see ‘Mark radio
stations as Favorites’ on page
16))
[All Stations] (lists all Internet radio
stations, categorized by genres)
[Recommended] (lists recommended
Internet radio services stations)
[My Media] (lists the Internet radio
stations that you have entered at
Club Philips under Streamium
Management)
4 Press to select the option, then press
.
To listen to a specic Internet radio
station, select option
[Search], then
use the alphanumeric buttons to enter
the radio station name.
To return to the Home menu, press
HOME.
EN
17
The nickname is the Internet radio
stations identication that is displayed
the NP1100.
13 Enter a description in the third column.
14 Click on Save to conrm your entries.
Note
If the manually added Internet radio station is available
and broadcast in a compatible format, you can listen to
it on the NP1100.
You can nd the manually added Internet radio stations
in the My Media list on the NP1100.
Internet radio features require broadband Internet
access.
Listen to My Media
When you manually add an Internet radio
station (see ‘Manually add Internet radio
stations’ on page
17), the Internet radio station
is found under
[My Media].
1 Ensure that the NP1100 is turned on.
2 Ensure that the NP1100 is connected to
the Internet.
3 Press INTERNET RADIO.
4 Press to select [My Media], then press
.
5 Press to select [Music], then press .
The list of your Internet radio stations
To return to the Home menu, press
HOME.
Note
Internet radio features require broadband Internet
access.
Browse through Internet Radio lists
The NP1100 has a feature that allows you to
browse through long lists of Internet Radio
stations similar to the page up and page down
feature on a PC.
È
È
È
3 Press HOME.
4 Select [Internet Radio] > [Favorite
Stations].
5 Press to select, then press .
To return to the Home menu, press
HOME.
Note
Internet radio features require broadband Internet
access.
Manually add Internet radio stations
This chapter explains how to register with
Philips and add individual URL addresses for
Internet radio stations on the PC.
1 Ensure that the NP1100 is turned on.
2 Ensure that the NP1100 is connected to
the Internet.
3 On the NP1100, select [Settings]
>
[Registration settings] > [User
registration].
The registration display is shown.
4 Press alphanumeric buttons on the remote
control to enter your valid email address.
5 Press .
The display conrms the automated
email dispatch to your mailbox.
6 Check the email inbox for a message from
subject
Your Streamium Registration....
7 Follow the instructions in the email to
complete your registration process on the
Philips website.
8 On the registered product site, click the
link
Streamium Management.
9 Select My Media.
10 Click on the tab Music.
11 Enter the URL address of Internet radio
station in the rst column.
12 Enter a nickname in the second column.
È
È
Internet radio
Eng l ish
EN
18
1 Press / to browse up / down in the
list.
EN
19
Adjust brightness
1 Ensure that the NP1100 is turned on.
2 Press HOME.
3 Select [Settings] > [Brightness].
4 Press to adjust the settings, then press
.
5 To return to the Home menu, press
HOME.
Date and time settings
This chapter shows you how to change the
date and time settings.
Set the time
1 Ensure that the NP1100 is turned on.
2 Press HOME.
3 Select [Settings] > [Date and time].
4 Press or , then to select [Set time].
5 Press or to adjust, then to conrm
the time.
6 Press to return to the previous selection
menu.
To return to the Home menu, press
HOME.
Set the time format
1 Ensure that the NP1100 is turned on.
2 Press HOME.
3 Select [Settings] > [Date and time].
4 Press or , then to select [Set time
format].
5 Press to select format, then press .
6 Press to return to the previous selection
menu.
To return to the Home menu, press
HOME.
7 Settings
The following settings are available to you:
[Play mode]
[Display settings]
[Date and time]
[Clicker sound]
[Software update]
[Demo]
[Sleep timer]
[Restore settings]
[System information]
[Network setup]
[Language]
This is how you change settings:
1 Press HOME.
2 Press to select [Settings], then press .
3 Press to select the setting that you
want to change, then press
.
To return to the Home menu, press
HOME.
Adjust display
This chapter shows you how to adjust the
following display settings:
DIM setting
s (see ‘Adjust DIM settings’ on
page
19)
Brightness (see ‘Adjust brightness’ on page
19)
Adjust DIM settings
1 Ensure that the NP1100 is turned on.
2 Press HOME.
3 Select [Settings] >[DIM Settings] .
4 Select:
[Bright]
[Soft]
[Backlight off]
1 To return to the Home menu, press
HOME.
Settings
Eng l ish
EN
20
To return to the Home menu, press
HOME.
Network setup
This chapter shows you how to change the
network setup.
Before you connect the NP1100 to a home
network router:
Ensure that the PC meets the minimum
requirements. (see ‘PC connection
requirements’ on page
24)
You can choose from two different modes
of connection:
Wireless connectio
n (see ‘Create wireless
connection’ on page
20)
Wired connectio
n (see ‘Create wired
connection’ on page
20)
Create wireless connection
1 Hold ready your network name and
network password or encryption key.
2 Ensure that your wireless access point or
wireless router is turned on.
3 Ensure that the NP1100 is turned on.
4 On the NP1100, congure the network:
5 Press HOME.
6 Press , then to select [Settings] >
[Network setup] > [Wireless] > [Search
for networks].
7 Press , then to select network.
Enter encryption key (if required).
8 Select [Automatic] > (Enable Proxy?) [No
(default)].
The NP1100 displays a conrmation
screen that the settings are saved.
Create wired connection
1 Ensure that the Ethernet port on the PC is
enabled.
È
Set the date
1 Ensure that the NP1100 is turned on.
2 Press HOME.
3 Select [Settings] > [Date and time].
4 Press or , then to select [Set date].
5 Press or to adjust, then to conrm
the date.
6 Press to return to the previous selection
menu.
To return to the Home menu, press
HOME.
Set sleep timer
You can select a set time period after which the
NP1100 automatically switches to standby.
The timer offers the following options:
[Off]
[15 minutes]
[30 minutes]
[1 hour]
[1.5 hours]
[2 hours]
1 Ensure that the NP1100 is turned on.
2 Press HOME.
3 Select [Settings] >[Sleep timer].
4 Press to select, then press .
To return to the Home menu, press
HOME.
Set button sound (Clicker)
1 Ensure that the NP1100 is turned on.
2 Press HOME.
3 Select [Clicker sound].
4 Press to select [Enable] or [Disable],
then press
.
5 Press to return to the previous selection
menu.
EN
21
2 Use the an Ethernet cable (sold separately)
to connect the NP1100 to the router that
is connected to your home network with
broadband Internet access.
3 Ensure that the NP1100 is turned on.
4 Press HOME.
5 Press , then to select [Settings] >
[Network setup] > [Wired].
6 Select [Automatic] (DHCP).
7 Select (Enable Proxy?) [No (default)].
The NP1100 displays a conrmation
screen that the settings are saved.
Change language
You can change the language that you have set
during the rst-time setup.
1 Ensure that the NP1100 is turned on.
2 Press HOME.
3 Select [Settings] > [Language].
4 Press to select language, then press .
To return to the Home menu, press
HOME.
È
Set the date
Eng l ish
EN
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37

Philips NP1100/12 Manuale utente

Categoria
Apparecchiature musicali supplementari
Tipo
Manuale utente

in altre lingue