Buffalo FB864 Manuale utente

Model • Modèle • Modell • Modello • Modelo • Malli:

FB864 / FE142-E

34Ltr 1800W

Programmable

Microwave

Instruction manual

EN Programmable Microwave

Instruction manual

2DE Programmierbare

Mikrowelle

Bedienungsanleitung

59

NL Programmeerbare magnetron

Handleiding

21 IT Microonde Programmabile

Manuale di istruzioni

78

FR Micro-ondes programmable

Mode d'emploi

40 ES Microondas programable

Manual de instrucciones

97

2

EN

Safety Instructions

To reduce the risk of fire, electric shock, injury to persons or

exposure to excessive microwave oven energy when using your

appliance, follow basic precautions, including the following:

PRECAUTIONS TO AVOID POSSIBLE EXPOSURE

TO MICROWAVE ENERGY

Do not attempt to operate this oven with the door open, since

this can result in harmful exposure to microwave energy. It is

important not to break or tamper with the safety interlocks.

Do not place any object between the oven front face and the

door or allow soil or cleaner residue to accumulate on sealing

surfaces.

Warning: If the door or door seals area damaged, the oven

must not be operated until it has been repaired by a competent

person.

• Position on a flat, stable surface.

• A service agent/qualified technician should carry out

installation and any repairs if required. Do not remove any

components on this product.

• Consult Local and National Standards to comply with the

following:

- Health and Safety at Work Legislation

- BS EN Codes of Practice

- Fire Precautions

- IEE Wiring Regulations

- Building Regulations

• Warning: Liquids and other foods must not be heated in

sealed containers since they are liable to explode.

3

EN

• Warning: It is hazardous for anyone other than a competent

person to carry out any service or repair operation that

involves the removal of a cover which gives protection against

exposure to microwave energy.

• Only use utensils suitable for use in microwave ovens.

• The oven should be cleaned regularly and any food deposits

should be removed.

• When heating food in plastic or paper containers, keep an eye

on the oven due to the possibility of ignition.

• If smoke is observed, switch off or unplug the appliance and

keep the door closed in order to stifle any flames.

• Do not overcook food.

• Do not use the oven cavity for storage purposes. Do not store

items, such as bread, cookies, etc. inside the oven.

• Remove wire twist-ties and metal handles from paper or

plastic containers/bags before placing them in the oven.

• Install or locate this oven only in accordance with the

installation instructions provided.

• Eggs in the shell and whole hard-boiled eggs should not be

heated in microwave ovens since they may explode, even after

microwave heating has ended.

• Use this appliance only for its intended uses as described in

manual. Do not use corrosive chemicals or vapours in this

appliance. This oven is especially designed to heat. It is not

designed for industrial or laboratory use.

• Do not store or use this appliance outdoors.

• Do not use this oven near water, in a wet basement or near a

swimming pool.

• The temperature of accessible surfaces may be high when

the appliance is operating. The surfaces are liable to get hot

during use. Keep cord away from heated surface, and do not

cover any vents on the oven.

4

EN

• Do not let cord hang over edge of table or counter.

• Failure to maintain the oven in a clean condition could lead to

deterioration of the surface that could adversely affect the life

of the appliance and possibly result in a hazardous situation.

• Warning: The contents of feeding bottles baby food jars

shall be stirred or shaken and the temperature checked before

consumption, in order to avoid burns.

• Warning: Microwave heating of beverages result in delayed

eruptive boiling, therefore care must be taken when handling

the container.

• Liquids such as water, coffee and tea can overheat beyond

boiling point without appearing to be boiling.

• Always switch off and disconnect the power supply to the unit

before cleaning or carrying out maintenance.

• Keep all packaging away from children. Dispose of the

packaging in accordance to the regulations of local authorities.

• If the power cord is damaged, it must be replaced by a

BUFFALO agent or a recommended qualified technician in

order to avoid a hazard.

• This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities,

or lack of experience or knowledge, unless they have been

given supervision or instruction concerning the use of the

appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play

with the appliance.

• Do not operate the oven when empty.

• The microwave oven shall not be placed in a cabinet unless it

has been tested in a cabinet.

• The appliance is not intended to be operated by means of an

external timer or separate remote-control system.

• Do not use jet/pressure washers to clean the appliance.

5

EN

• Buffalo recommend that this appliance should be periodically

tested (at least annually) by a Competent Person. Testing

should include, but not be limited to: Visual Inspection,

Polarity Test, Earth Continuity, Insulation Continuity and

Functional Testing.

• Buffalo recommend that this product is connected to a circuit

protected by an appropriate RCD (Residual Current Device).

Introduction

Please take a few moments to carefully read through this manual. Correct maintenance and operation of

this machine will provide the best possible performance from your BUFFALO product.

Pack Contents

The following is included:

• Microwave Oven • Instruction manual

BUFFALO prides itself on quality and service, ensuring that at the time of packaging the contents are

supplied fully functional and free of damage.

Should you find any damage as a result of transit, please contact your BUFFALO dealer immediately.

Installation

1. Remove all packaging materials. Make sure that all protective plastic film and coatings are thoroughly

removed from all surfaces.

Warning: Check for any of the following damage that may have occurred:

• Misaligned or bent door, damaged door seals/sealing surface, broken/loose

door hinges, dents in the oven interior.

• DO NOT operate the oven if any damage is found. Call a BUFFALO agent or

qualified Technician.

2. Position the oven on a flat, stable and heat-

resistant surface. For sufficient ventilation,

allow a minimum of 30cm of space above the

oven, 10cm at the back and right side. The left

side must be open.

Note: Do not cover or block any openings

on the appliance, or remove the feet.

3. Place the oven as far away from radios and

TV as possible as operation of the appliance

may cause interference to your radio or TV

reception.

30cm

10cm

6

EN

Stacking the appliance

Note: To save space, a maximum of 2 appliances can be stacked together. For

details, please follow below instructions.

1. Loosen the screws that fix the mounting plates. Then remove the mounting plates and re-tighten the

screws in place (Step A).

2. Remove the 4 screws as shown in Step B.

3. Locate the mounting plates to the joined parts of the 2 ovens, then fix with the screws just removed

(Step C).

Utensils

See the instructions in this chapter for utensils to use/avoid with microwaving. If in doubt, please check

the manufacturer’s instructions if your utensil is microwave safe or not.

7

EN

Materials you can use in microwave oven

Utensils

(Not included) Remarks

Browning dish Follow manufacturer’s instructions. The bottom of browning dish must be

placed smoothly on the ceramic board. Incorrect usage may the ceramic board

to break.

Dinnerware Microwave-safe only. Follow manufacturer’s instructions. Do not use cracked or

chipped dishes.

Glass jars Always remove lid. Use only to heat food until just warm. Most glass jars are

not heat resistant and may break.

Glassware Heat-resistant oven glassware only. Make sure there is no metallic trim. Do not

use cracked or chipped dishes.

Oven cooking bags Follow manufacturer’s instructions. Do not close with metal tie. Make slits to

allow steam to escape.

Paper plates and cups Use for short-term cooking/warming only. Do not leave oven unattended while

cooking.

Paper towels Use to cover food for reheating and absorbing fat. Use with supervision for a

short-term cooking only.

Parchment paper Use as a cover to prevent splattering or a wrap for steaming.

Plastic Microwave-safe only. Follow the manufacturer’s instructions. Should be labelled

“Microwave Safe”. Some plastic containers soften, as the food inside gets hot.

“Boiling bags” and tightly closed plastic bags should be slit, pierced or vented

as directed by package.

Plastic wrap Microwave-safe only. Use to cover food during cooking to retain moisture. Do

not allow plastic wrap to touch food.

Thermometers Microwave-safe only (meat and candy thermometers)

Wax Paper Use a cover to prevent splattering and to help retain moisture

Materials to be avoided in microwave oven

Utensils

(Not included) Remarks

Aluminium tray May cause arcing. Transfer food into microwave-safe dish

Food carton with metal

handle May cause arcing. Transfer food into microwave-safe dish

Metal or metal-

trimmed utensils Metal shields the food from microwave energy. Metal trim may cause arcing

Metal twist ties May cause arcing and could cause a fire in the oven

Paper bags May cause a fire in the oven

Plastic foam Plastic foam may melt or contaminate the liquid inside when exposed to high

temperature

Wood Wood will dry out when used in the microwave oven and may split or crack

8

EN

Knowing your appliance

C

B D

A

A) Control panel

B) Observation window

C) Safety interlock system

D) Ceramic board

Note:

1. DO NOT press the ceramic board

forcibly.

2. Take and put utensils gently to avoid

damage to the ceramic board.

3. After use, DO NOT touch the

ceramic board with hand to avoid

high temperature scalding.

Control panel

(1)

(6)

(2)

(3)

(4)

(5)

(1) Power level buttons

(2) Time Entry Button

(3) X2 Button

(4) Stop/Reset Button

(5) Start Button

(6) Number buttons

9

EN

Appendix A: User Options

Values bolded in the table below are the default settings.

Option Setting Description

1

EOC Tone OP:10 3 seconds beep

OP:11 Continuous beep

OP:12 5 quick beeps, repeating

2

Beeper Volume OP:20 Beeper Off

OP:21 Low

OP:22 Medium

OP:23 High

3

Beeper On/Off OP:30 Key beep Off

OP:31 Key beep On

4

Keyboard Window OP:40 15 seconds

OP:41 30 seconds

OP:42 60 seconds

OP:43 120 seconds

5

On the Fly OP:50 On-the-Fly Disable

OP:51 On-the-Fly Enable

6

Door Reset OP:60 Door reset Disable

OP:61 Door reset Enable

7

Max time OP:70 60 Minute Maximum cook time

OP:71 10 Minute Maximum cook time

8

Manual Programming OP:80 Manual Programming Disable

OP:81 Manual Programming Enable

9

Double digit OP:90 Single Digit Mode-10 programs

OP:91 Double Digit Mode-100 programs

10

EN

Appendix B: Default Cooking Time

The oven will be shipped with the following Preset Cook Time unless otherwise noted in the product

Specification.

Number Button Display (Time in Minute) Power

10:10 100%

20:20 100%

30:30 100%

40:45 100%

51:00 100%

61:30 100%

72:00 100%

82:30 100%

93:00 100%

03:30 100%

Operation

1. Power up

When the oven is electrified for the first time, “-------” is shown. If button pressed, the oven will

change to idle mode.

Note: Under idle mode, no button can be pressed.

2. Idle Mode

1. Entry: The oven will enter idle mode after a set of seconds have expired in Ready Mode without a

keyboard pressed or door opened and closed. The number of seconds is determined by the keyboard

Timeout Window, set by User Option 4.

2. During idle mode, “ECO” is shown. And there will be no oven activity.

3. Ready Mode

In this mode, the oven is ready to begin either a manual or preset cooking cycle.

1. Opening and closing the door while in Idle Mode will put the oven into Ready Mode.

2. During Ready Mode, “READY” is shown.

3. From the Ready Mode, the oven can go to almost all of the other modes.

11

EN

4. Door Open Mode

1. When the door is open, the oven will enter Door Open Mode. This allows for entry into Programming

Mode.

2. During this mode, the display keeps displaying “DOOR” and “OPEN” alternately. The fan and oven

lamp will work.

3. When the door is closed, if User Option OP:60 is selected and the oven was running a manual or

preset cook cycle, the oven will enter Pause Mode. In all other cases, the oven will return to Door

Open Mode with User Option OP:61 selected.

• Note: Opening and then closing the door will clear out any information about a Manual or Preset

Program which was running.

5. Pause Mode

This mode enables the user to temporarily stop the cooking cycle so as to inspect or stir food.

1. While in Manual Cook Mode or Preset Program Cook Mode, if the door is open and then closed, or if

is pressed, the oven will enter Pause Mode.

2. While paused, the display will show the remaining cooking time.

3. Pause Mode will return to Idle Mode in the exact fashion as Ready Mode, depending on User Option 4

setting. Additionally, if button is pressed, the oven will immediately enter Ready Mode. Or if

pressed, the oven will continue to run the cooking cycle.

6. Manual Cook Mode

The user can manually set cooking time and power level while in this mode.

1. While in Ready Mode, press button to enter Manual Cook Mode. The display will show“00:00”.

2. Press the number buttons to input the cooking time as needed.

3. Press , , or button to select power level. The display will show the related

power. If the same button pressed twice, the power level will change to full power.

4. Press to start manual cooking.

5. Remaining cooking time is displayed. The fan and oven lamp will work.

6. When cooking program finishes, the oven will enter End of Cook Cycle Mode.

12

EN

7. End of Cook Cycle Mode

1. After a Manual Cook Mode or a Preset Program Cook Mode expires, the oven will enter End of Cook

Cycle Mode.

2. During this mode, “DONE” is shown.

3. If User Option OP:11 or OP:12 is selected, the oven will continue to sound until the user

acknowledges this by either opening and closing the door or pressing . If User Option OP:10 is

selected, after 3 seconds beeping, the oven will enter Ready Mode.

8. Preset Program Cook Mode

1. This mode allows cooking through a one-button-touch operation. While in Ready Mode, press one of

the number buttons to run a Preset Program for relative cooking time.

2. The remaining cooking time is shown. If it is multi-stage cooking, the total remaining cooking time is

displayed.

3. When cooking program finishes, the oven will enter End of Cook Cycle Mode.

9. On the Fly Cooking

1. While the oven is cooking, if User Option OP:51 is selected, press a number button will enable a

preset cooking program to start automatically.

2. The display shows the remaining cooking time.

3. When cooking program finishes, the oven will enter End of Cook Cycle Mode.

13

EN

10. Programming Mode

This mode allows the user to set cook time and power level to the preset programs of the number

buttons.

1. Open the door. Then press the number button “1” for 5 seconds. The buzzer will sound once and

enter Programming Mode.

2. “PROGRAM” is shown.

3. Press the number button, e.g. “3”, the display will show “P:03”. After 2 seconds, the default cooking

time “ :30“ is shown. Now you can press the number buttons to set the desired cooking time.

4. Press , , or to set the power level. The display will show the related power.

If the same button pressed twice, the power will change to full power.

5. After setting cooking time and power, press to save. When saved, “PROGRAM” is shown.

• Note: If all the cooking time exceeds the maximum time allowed by User Option 7, when pressing

to save the program, the buzzer will sound 3 times briefly to indicate the time is not valid. Then

the display will turn back to show “PROGRAM”. The time set before will have no change.

6. Close the door, the oven will turn back to Ready Mode.

• Note: If pressing during setting, the oven will turn to Door Open Mode. The program that is not

saved will be lost. If there is program saved as memory procedure, press the related number button,

the saved program will start. If no program saved, the buzzer will alarm when pressing number

buttons and thus it will not work.

For example, if desired to set a program as memory cooking, with power level PL7 and cooking time of

1 minute and 25 seconds, please follow below operations:

Step1: Open the door. Then press number button “1” for 5 seconds, “PROGRAM” is shown.

Step2: Press the number button, e.g. “3”, the display will show “P:03”. After 2 seconds, the default

cooking time “ :30“ is shown.

Step3: Press number buttons “1”, “2” and “5” to set the cooking time. “1:25” is shown.

Step4: Press . “1:25 70” is shown. Setting is now finished.

Step5: Press to save. “PROGRAM” is shown again. When to use the program next time, just

press the number button “3”, the related program will start automatically.

Note:

• If power supply is cut off, the saved program will not be lost.

• If the program needs to reset , just repeat the above steps.

• If pressing at the last step, it will return to Door Open Mode. All settings will not be saved.

14

EN

11. Double cooking time

By using “X2” button, the user can easily set the doubled cooking time for a particular food item.

1. In Ready mode, press “X2” button first, then within 5 seconds press a number button (0-9). The oven

will start cooking with the doubled cooking time. Or, press a number button (0-9) to start cooking

first, then within 5 seconds press “X2” button to start cooking with the doubled cooking time.

2. When pressing “X2”, the display will show “DOUBLE”. When pressing number buttons, the doubled

cooking time will be shown.

• For example, press the number button “5” (whose preset time is 1 minute) first. Then press “X2”, the

total cooking time will change to 1:00*(1+0.8)=1:48 (1 minute and 48 seconds). Please note “0.8”

here means the default proportion setting for double cooking time.

3. When cooking program finishes, the oven will enter End of Cook Cycle Mode.

12. Stage Cooking Program

This function allows the user to cook food items at combination of various Power Levels. Three stages can

be set at most.

1. After setting cook time and power for the first stage, press “ ” to set the second stage. Then

the same step to set the third stage.

2. Press “ ” to save.

Example: If desired to set a 3-stage cooking cycle as a memory program (The first stage is with cook

time of 1 minute and 25 seconds and power level PL7; the second stage with cook time of 5 minutes

and 40 seconds and power level PL5; the third stage with cook time of 1 minute and 30 seconds and

power level PL2), please follow below operations:

Step1: Open the door. Then press number button “1” for 5 seconds, “PROGRAM” is shown.

Step2: Press the number button, e.g. “3”, the display will show “P:03”. After 2 seconds, the default

cooking time “ :30“ is shown.

Step3: Press number buttons “1”, “2”, “5” to set the cooking time. “1:25” is shown.

Step4: Press . “1:25 70” is shown. Now the first stage is finished.

Step5: Press . “STAGE-2” is shown.

Step6: Press number buttons “5”, “4”, “0” to set the cooking time. “5:40” is shown.

Step7: Press . “5:40 50” is shown. Now the second stage is finished.

Step8: Press . “STAGE-3” is shown.

Step9: Press number buttons “1”, “3”, “0” to set the cooking time. “1:30” is shown.

Step10: Press . “1:30 20” is shown. Now the third stage is finished.

Step11: Press to save. “PROGRAM” is shown again. When to use the program next time, just

press number button “3”, the program will start automatically.

15

EN

13. User Option Mode

This allows the user to choose between various ways for the oven to operate.

1. Open the door and press “2” for 5 seconds to enter User option mode.

2. The display shows “OP: - -”.

3. Press any number button to enter related mode setting.

• For example: Setting the voice of the buzzer to medium. Press “2”, “OP:22” is displayed. If you want

to change, keep pressing “2”, the display will show “OP:20”, “OP:21”, ”OP:22”, ”OP:23”, “OP:20”.....in

cycle.

4. Press to save the current setting. After saved, “OP: - -” is displayed again.

Notes:

• During setting, press to enter Door Open Mode. Close the door to enter Ready Mode.

• If button not pressed at the last step, the program cannot be saved but returns to previous

state.

14. Service Mode

1. Open the door and press “3” for 5 seconds to enter service mode.

2. The display shows “SERVICE”.

3. To check the times of closing or opening the door, just press number button “3”, the display will show

the times. Or you can press other number buttons to check related information:

Press “1” to check tube hours

Press “2” to check tube cycles

Press “3” to check door cycles

Press “4” and to clear service information

4. Press to enter Door Open Mode. Close the door to enter Ready Mode.

15. Factory-default setting

In ready mode, press and “0” to check the factory-default setting. The buzzer sounds once and the

display will show “CHECK”.

• If it is in the factory default setting, the display will show “11”.

• If NOT in the factory default setting, the display will show “00”.

• If desired to restore the default setting, press again. The display will show “CLEAR” first, then

“CHECK” and finally “11” . Now the factory-default settings are restored.

Note: Be careful of the operations as it will restore all the factory-default settings.

Note: Should the restoration of default settings fail, please just repeat above operations.

16

EN

Cleaning, Care & Maintenance

• Warning: Switch off and disconnect from the power supply before cleaning

and maintenance.

• Always keep the oven clean!

• Clean the door frame, seal and neighbouring parts carefully with a damp

cloth when dirty.

Cleaning the door and oven front face

• For best performance and to maintain the high degree of safety, the inner door panel and oven front

face should be free of food or grease build-up.

• Wipe these parts with a mild detergent, rinse and wipe dry. Never use abrasive powders or pads.

Cleaning the control panel and plastic parts

• Do not apply a detergent or an alkaline liquid spray to the control panel and plastic parts, as this may

cause damage to these parts.

• Use a dry cloth (not a soaked cloth) to clean these parts.

• Do not allow the control panel to become wet.

Cleaning the oven interior

• After use be sure to remove spilled liquids, spattered oil and food debris as quickly as possible.

• If the oven is used when dirty, efficiency drops and the dirt gets stuck on the oven surface. This may

cause bad odours.

• Clean the interior with a cloth soaked in luke-warm water with a mild detergent dissolved in it, then

rinse the soap off with a damp cloth.

Remove any odours in the oven interior by microwaving a cup of water with the

juice of 1 lemon for 5 minutes. Wipe the oven clean with a soft dry cloth.

Caution:

Personal Injury Hazard! It is hazardous for anyone other than a competent

person to carry out any service or repair operation that involves the removal of

a cover which gives protection against exposure to microwave energy.

Caution:

Do Not wipe plastic and painted sections of the oven with bleach, thinners or

other cleaning agents, as this may cause these parts to dissolve or distort.

Caution: For the removable oil baffle and filter, always ensure to:

• Clean them in time!

• Install them correctly after cleaning and before use of the oven.

17

EN

Cleaning the oil baffle

The oven is featured with a removable oil baffle for easy and thorough cleaning. The baffle is located

underneath the interior ceiling of the oven.

• To remove the baffle, press and hold the 2 dents on the baffle front (Step A). Meanwhile push the

whole baffle backward to release. Afterward, remove the baffle from the oven (Step B).

• Clean the baffle with a mild detergent, rinse and wipe dry.

• To install the baffle, hold the baffle and insert the 3 pins on the rear into the holes on the oven back

wall (Step C).

• Press the right dent backward until the right part of the baffle gets buckled. Repeat same operation

to buckle the left part into position (Step D).

18

EN

Cleaning the filter

The oven is featured with a removable filter for easy and thorough cleaning.

• Loosen the fixing nails (Step A), then remove the filter (Step B).

• Clean the filter with a soft brush.

• Locate the filter in place and fix with the nails (Step C).

19

EN

Troubleshooting

A qualified technician must carry out repairs if required.

Fault Probable Cause Solution

The unit is not

working The unit is not switched on Check the unit is plugged in correctly and

switched on

Plug or lead is damaged Replace Plug or lead

Fuse in the plug has blown Replace the fuse

Mains power supply fault Check mains power supply

Door is not closed properly Close door securely

Arcing/Sparking Metallic or other inappropriate

materials are being used in food

preparation

Remove metal objects. Use microwave-safe

utensils only

Spilled food remains inside the oven Clean the interior of the oven

The oven is operated when empty Do not operate the oven when empty. It is

very dangerous

Microwave oven

interfering with

TV reception

Radio and TV reception is interfered

when then appliance is operating. It is normal

Steam

accumulating on

door and hot air

out of vents

In cooking, steam may come out of

food. Most will get out of vents but

some may accumulate on cool places

like the oven door

It is normal

Dim oven light In low power microwave cooking, oven

light may become dim It is normal

Technical Specifications

Note: Due to our continuing program of research and development, the specifications herein may be

subject to change without notice.

Model Voltage Power Microwave

Output Oven

Capacity Operation

Frequency

Dimensions

h x w x d

(mm)

Weight

(kg)

FB864 230-240V~

50Hz 3000W 1800W 34L 2450MHz 368 x 574 x

528 33.3

FE142-E 230~ 50Hz

20

EN

Electrical Wiring

This appliance is supplied with a 3 pin BS1363 plug and lead.

The plug is to be connected to a suitable mains socket.

This appliance is wired as follows:

• Live wire (coloured brown) to terminal marked L

• Neutral wire (coloured blue) to terminal marked N

• Earth wire (coloured green/yellow) to terminal marked E

This appliance must be earthed.

If in doubt consult a qualified electrician.

Electrical isolation points must be kept clear of any obstructions. In the event of any emergency

disconnection being required they must be readily accessible.

Compliance

The WEEE logo on this product or its documentation indicates that the product must

not be disposed of as household waste. To help prevent possible harm to human

health and/or the environment, the product must be disposed of in an approved and

environmentally safe recycling process. For further information on how to dispose of

this product correctly, contact the product supplier, or the local authority responsible for

waste disposal in your area.

BUFFALO parts have undergone strict product testing in order to comply

with regulatory standards and specifications set by international,

independent, and federal authorities.

BUFFALO products have been approved to carry the following symbol:

mechanical, photocopying, recording or otherwise, without the prior written permission of BUFFALO.

Every effort is made to ensure all details are correct at the time of going to press, however, BUFFALO reserves the right to

change specifications without notice.

La pagina si sta caricando...

Buffalo FB864 Manuale utente

Buffalo FB864 Manuale utente

in altre lingue

Documenti correlati

Altri documenti